Hi Steven,

Please follow the bellow link to set mac address.

http://www.armadeus.com/wiki/index.php?title=Ethernet_MAC_address

-Anand Moon On 8/15/2014 11:12 PM, Steven Rostedt wrote:

Hi,

I'm using my BeagleBone White to debug some ftrace code and with the help from people like Robert Nelson I was finally able to boot it and test my kernel.

But I'm still having some other issues. The most annoying one is that the new kernel assigns some random MAC address to my NIC and I can't give my board the proper IP address via DHCP.

Seems there was talk about adding this via the device tree, but it was rejected because U-Boot can do it. The problem I have is that U-Boot doesn't!

I downloaded the latest U-Boot from git://git.denx.de/u-boot.git (Is that the right place?) and had to tweak it so that I can boot a kernel via tftp and still use the filesystem on the SD card.

When I place the 3.2 kernel that came with the board on my tftp server, all works fine. I get the same MAC addr each boot and things just work. But if I place the 3.16 kernel that I build on the tftp server, I get some random MAC address, and then a dynamic IP to go with it :-(

This is in my dmesg:

[ 2.304970] cpsw 4a100000.ethernet: Random MACID = 8a:fc:f5:aa:b6:e1

I can also see in the file arch/arm/boot/dts/am33xx.dtsi:

                     cpsw_emac0: slave@4a100200 {
                             /* Filled in by U-Boot */
                             mac-address = [ 00 00 00 00 00 00 ];
                     };

Well, it's not filled in by U-Boot.

My question to all of you is, how do I fix this? I need a static mac addr.

One way is that I might have to update that file myself with a temp patch, but I think that's a hack and not something worth doing.

What's the proper way to have the board always come up with the same MAC addr?

Thanks, this is rather annoying.

-- Steve

---

linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Hi Steven,

On Fri, Aug 15, 2014 at 01:42:21PM -0400, Steven Rostedt wrote:

Hi,

I'm using my BeagleBone White to debug some ftrace code and with the help from people like Robert Nelson I was finally able to boot it and test my kernel.

But I'm still having some other issues. The most annoying one is that the new kernel assigns some random MAC address to my NIC and I can't give my board the proper IP address via DHCP.

Seems there was talk about adding this via the device tree, but it was rejected because U-Boot can do it. The problem I have is that U-Boot doesn't!

I downloaded the latest U-Boot from git://git.denx.de/u-boot.git (Is that the right place?) and had to tweak it so that I can boot a kernel via tftp and still use the filesystem on the SD card.

When I place the 3.2 kernel that came with the board on my tftp server, all works fine. I get the same MAC addr each boot and things just work. But if I place the 3.16 kernel that I build on the tftp server, I get some random MAC address, and then a dynamic IP to go with it :-(

This is in my dmesg:

[ 2.304970] cpsw 4a100000.ethernet: Random MACID = 8a:fc:f5:aa:b6:e1

I can also see in the file arch/arm/boot/dts/am33xx.dtsi:

                    cpsw_emac0: slave@4a100200 {
                            /* Filled in by U-Boot */
                            mac-address = [ 00 00 00 00 00 00 ];
                    };

Well, it's not filled in by U-Boot.

My question to all of you is, how do I fix this? I need a static mac addr.

One way is that I might have to update that file myself with a temp patch, but I think that's a hack and not something worth doing.

What's the proper way to have the board always come up with the same MAC addr?

The am335x SoC already has 4 registers which contain two unique vendor MAC addresses, so they should be used automatically instead of a random one.

As you mentioned above, I sent a series to read and use those addresses in the linux kernel. There were some problems with the series which I fixed to send a new version of the series, but I didn't send it yet. I will try to resend it tomorrow and Cc you. It would be great if you could test it.

As far as I know, barebox also works with the beaglebone white and it should set the correct MAC address as well. So if you need the same IP address in linux as in the bootloader, you could try barebox.

Best Regards,

Markus