From: Viresh Kumar viresh.kumar@linaro.org

We may want to enable only a subset of OPPs, from the bigger list of OPPs, based on what version of the hardware we are running on. This would enable us to not duplicate OPP tables for every version of the hardware we support.

To enable that, this patch defines a new property 'opp-supported-hw'. It can support any number of hierarchy levels of the versions the hardware follows. And based on the selected hardware versions, we can pick only the relevant OPPs at runtime.

Reviewed-by: Stephen Boyd sboyd@codeaurora.org Acked-by: Rob Herring robh@kernel.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 1c4d12de2719dfdf27c6dab31e7a5641ee293c94) Signed-off-by: Alex Shi alex.shi@linaro.org --- Documentation/devicetree/bindings/opp/opp.txt | 65 +++++++++++++++++++++++++++ 1 file changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 0cb44dc..d072fa0 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -123,6 +123,26 @@ Optional properties: - opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in the table should have this.

+- opp-supported-hw: This enables us to select only a subset of OPPs from the + larger OPP table, based on what version of the hardware we are running on. We + still can't have multiple nodes with the same opp-hz value in OPP table. + + It's an user defined array containing a hierarchy of hardware version numbers, + supported by the OPP. For example: a platform with hierarchy of three levels + of versions (A, B and C), this field should be like <X Y Z>, where X + corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z + corresponds to version hierarchy C. + + Each level of hierarchy is represented by a 32 bit value, and so there can be + only 32 different supported version per hierarchy. i.e. 1 bit per version. A + value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy + level. And a value of 0x00000000 will disable the OPP completely, and so we + never want that to happen. + + If 32 values aren't sufficient for a version hierarchy, than that version + hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the + above example, Z1 & Z2 refer to the version hierarchy Z. + - status: Marks the node enabled/disabled.

Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. @@ -463,3 +483,48 @@ Example 5: Multiple OPP tables }; }; }; + +Example 6: opp-supported-hw +(example: three level hierarchy of versions: cuts, substrate and process) + +/ { + cpus { + cpu@0 { + compatible = "arm,cortex-a7"; + ... + + cpu-supply = <&cpu_supply> + operating-points-v2 = <&cpu0_opp_table_slow>; + }; + }; + + opp_table { + compatible = "operating-points-v2"; + status = "okay"; + opp-shared; + + opp00 { + /* + * Supports all substrate and process versions for 0xF + * cuts, i.e. only first four cuts. + */ + opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000 915000 925000>; + ... + }; + + opp01 { + /* + * Supports: + * - cuts: only one, 6th cut (represented by 6th bit). + * - substrate: supports 16 different substrate versions + * - process: supports 9 different process versions + */ + opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000 915000 925000>; + ... + }; + }; +};

From: Viresh Kumar viresh.kumar@linaro.org

These aren't used until now by any DT files and wouldn't be used now as we have a better scheme in place now, i.e. opp-property-<name> properties.

Remove the (useless) binding without breaking ABI.

Reviewed-by: Stephen Boyd sboyd@codeaurora.org Acked-by: Rob Herring robh@kernel.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit af87a39a5f7cf6ef252b1aec3e2e6508a40e51f1) Signed-off-by: Alex Shi alex.shi@linaro.org --- Documentation/devicetree/bindings/opp/opp.txt | 62 +-------------------------- 1 file changed, 2 insertions(+), 60 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index a3e7f0d..24eac9a 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device.

-Devices may want to choose OPP tables at runtime and so can provide a list of -phandles here. But only *one* of them should be chosen at runtime. This must be -accompanied by a corresponding "operating-points-names" property, to uniquely -identify the OPP tables. - If required, this can be extended for SoC vendor specfic bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>".

-Optional properties: -- operating-points-names: Names of OPP tables (required if multiple OPP - tables are present), to uniquely identify them. The same list must be present - for all the CPUs which are sharing clock/voltage rails and hence the OPP - tables. - * OPP Table Node

This describes the OPPs belonging to a device. This node can have following @@ -448,54 +437,7 @@ Example 4: Handling multiple regulators }; };

-Example 5: Multiple OPP tables - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - cpu-supply = <&cpu_supply> - operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>; - operating-points-names = "slow", "fast"; - }; - }; - - cpu0_opp_table_slow: opp_table_slow { - compatible = "operating-points-v2"; - status = "okay"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <600000000>; - ... - }; - - opp01 { - opp-hz = /bits/ 64 <800000000>; - ... - }; - }; - - cpu0_opp_table_fast: opp_table_fast { - compatible = "operating-points-v2"; - status = "okay"; - opp-shared; - - opp10 { - opp-hz = /bits/ 64 <1000000000>; - ... - }; - - opp11 { - opp-hz = /bits/ 64 <1100000000>; - ... - }; - }; -}; - -Example 6: opp-supported-hw +Example 5: opp-supported-hw (example: three level hierarchy of versions: cuts, substrate and process)

/ { @@ -540,7 +482,7 @@ Example 6: opp-supported-hw }; };

-Example 7: opp-microvolt-<name>, opp-microamp-<name>: +Example 6: opp-microvolt-<name>, opp-microamp-<name>: (example: device with two possible microvolt ranges: slow and fast)

/ {

From: Viresh Kumar viresh.kumar@linaro.org

Few doc-style comments were missing, add them. Rearrange another one to match the sequence within the structure.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Acked-by: Pavel Machek pavel@ucw.cz Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit dc4e7b1fa20a840d2317fcfdaa1064fc09d2afcb) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/opp.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index a6bd8d2c..b8880c7 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -51,8 +51,8 @@ extern struct mutex dev_opp_list_lock; * are protected by the dev_opp_list_lock for integrity. * IMPORTANT: the opp nodes should be maintained in increasing * order. - * @dynamic: not-created from static DT entries. * @available: true/false - marks if this OPP as available or not + * @dynamic: not-created from static DT entries. * @turbo: true if turbo (boost) OPP * @suspend: true if suspend OPP * @rate: Frequency in hertz @@ -126,7 +126,9 @@ struct device_list_opp { * @dev_list: list of devices that share these OPPs * @opp_list: list of opps * @np: struct device_node pointer for opp's DT node. + * @clock_latency_ns_max: Max clock latency in nanoseconds. * @shared_opp: OPP is shared between multiple devices. + * @suspend_opp: Pointer to OPP to be used during device suspend. * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. *

From: Viresh Kumar viresh.kumar@linaro.org

OPP bindings (for few properties) allow a platform to choose a value/range among a set of available options. The options are present as opp-<prop>-<name>, where the platform needs to supply the <name> string.

The OPP properties which allow such an option are: opp-microvolt and opp-microamp.

Add support to the OPP-core to parse these bindings, by introducing dev_pm_opp_{set|put}_prop_name() APIs.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Tested-by: Lee Jones lee.jones@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 01fb4d3c39d35b725441e8a9a26b3f3ad67793ed) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 165 ++++++++++++++++++++++++++++++++++++++---- drivers/base/power/opp/opp.h | 2 + include/linux/pm_opp.h | 9 +++ 3 files changed, 161 insertions(+), 15 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 55cf1a9..5c01fec 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -562,6 +562,9 @@ static void _remove_device_opp(struct device_opp *dev_opp) if (dev_opp->supported_hw) return;

+ if (dev_opp->prop_name) + return; + list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp, node);

@@ -794,35 +797,48 @@ unlock: }

/* TODO: Support multiple regulators */ -static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev) +static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, + struct device_opp *dev_opp) { u32 microvolt[3] = {0}; u32 val; int count, ret; + struct property *prop = NULL; + char name[NAME_MAX]; + + /* Search for "opp-microvolt-<name>" */ + if (dev_opp->prop_name) { + sprintf(name, "opp-microvolt-%s", dev_opp->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microvolt" */ + name[13] = '\0'; + prop = of_find_property(opp->np, name, NULL);

- /* Missing property isn't a problem, but an invalid entry is */ - if (!of_find_property(opp->np, "opp-microvolt", NULL)) - return 0; + /* Missing property isn't a problem, but an invalid entry is */ + if (!prop) + return 0; + }

- count = of_property_count_u32_elems(opp->np, "opp-microvolt"); + count = of_property_count_u32_elems(opp->np, name); if (count < 0) { - dev_err(dev, "%s: Invalid opp-microvolt property (%d)\n", - __func__, count); + dev_err(dev, "%s: Invalid %s property (%d)\n", + __func__, name, count); return count; }

/* There can be one or three elements here */ if (count != 1 && count != 3) { - dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n", - __func__, count); + dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n", + __func__, name, count); return -EINVAL; }

- ret = of_property_read_u32_array(opp->np, "opp-microvolt", microvolt, - count); + ret = of_property_read_u32_array(opp->np, name, microvolt, count); if (ret) { - dev_err(dev, "%s: error parsing opp-microvolt: %d\n", __func__, - ret); + dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret); return -EINVAL; }

@@ -830,7 +846,20 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev) opp->u_volt_min = microvolt[1]; opp->u_volt_max = microvolt[2];

- if (!of_property_read_u32(opp->np, "opp-microamp", &val)) + /* Search for "opp-microamp-<name>" */ + prop = NULL; + if (dev_opp->prop_name) { + sprintf(name, "opp-microamp-%s", dev_opp->prop_name); + prop = of_find_property(opp->np, name, NULL); + } + + if (!prop) { + /* Search for "opp-microamp" */ + name[12] = '\0'; + prop = of_find_property(opp->np, name, NULL); + } + + if (prop && !of_property_read_u32(opp->np, name, &val)) opp->u_amp = val;

return 0; @@ -948,6 +977,112 @@ unlock: } EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);

+/** + * dev_pm_opp_set_prop_name() - Set prop-extn name + * @dev: Device for which the regulator has to be set. + * @name: name to postfix to properties. + * + * This is required only for the V2 bindings, and it enables a platform to + * specify the extn to be used for certain property names. The properties to + * which the extension will apply are opp-microvolt and opp-microamp. OPP core + * should postfix the property name with -<name> while looking for them. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +int dev_pm_opp_set_prop_name(struct device *dev, const char *name) +{ + struct device_opp *dev_opp; + int ret = 0; + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + dev_opp = _add_device_opp(dev); + if (!dev_opp) { + ret = -ENOMEM; + goto unlock; + } + + /* Make sure there are no concurrent readers while updating dev_opp */ + WARN_ON(!list_empty(&dev_opp->opp_list)); + + /* Do we already have a prop-name associated with dev_opp? */ + if (dev_opp->prop_name) { + dev_err(dev, "%s: Already have prop-name %s\n", __func__, + dev_opp->prop_name); + ret = -EBUSY; + goto err; + } + + dev_opp->prop_name = kstrdup(name, GFP_KERNEL); + if (!dev_opp->prop_name) { + ret = -ENOMEM; + goto err; + } + + mutex_unlock(&dev_opp_list_lock); + return 0; + +err: + _remove_device_opp(dev_opp); +unlock: + mutex_unlock(&dev_opp_list_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name); + +/** + * dev_pm_opp_put_prop_name() - Releases resources blocked for prop-name + * @dev: Device for which the regulator has to be set. + * + * This is required only for the V2 bindings, and is called for a matching + * dev_pm_opp_set_prop_name(). Until this is called, the device_opp structure + * will not be freed. + * + * Locking: The internal device_opp and opp structures are RCU protected. + * Hence this function internally uses RCU updater strategy with mutex locks + * to keep the integrity of the internal data structures. Callers should ensure + * that this function is *NOT* called under RCU protection or in contexts where + * mutex cannot be locked. + */ +void dev_pm_opp_put_prop_name(struct device *dev) +{ + struct device_opp *dev_opp; + + /* Hold our list modification lock here */ + mutex_lock(&dev_opp_list_lock); + + /* Check for existing list for 'dev' first */ + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) { + dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp)); + goto unlock; + } + + /* Make sure there are no concurrent readers while updating dev_opp */ + WARN_ON(!list_empty(&dev_opp->opp_list)); + + if (!dev_opp->prop_name) { + dev_err(dev, "%s: Doesn't have a prop-name\n", __func__); + goto unlock; + } + + kfree(dev_opp->prop_name); + dev_opp->prop_name = NULL; + + /* Try freeing device_opp if this was the last blocking resource */ + _remove_device_opp(dev_opp); + +unlock: + mutex_unlock(&dev_opp_list_lock); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name); + static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp, struct device_node *np) { @@ -1042,7 +1177,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) if (!of_property_read_u32(np, "clock-latency-ns", &val)) new_opp->clock_latency_ns = val;

- ret = opp_parse_supplies(new_opp, dev); + ret = opp_parse_supplies(new_opp, dev, dev_opp); if (ret) goto free_opp;

diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index 70f4564..690638e 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -131,6 +131,7 @@ struct device_list_opp { * @suspend_opp: Pointer to OPP to be used during device suspend. * @supported_hw: Array of version number to support. * @supported_hw_count: Number of elements in supported_hw array. + * @prop_name: A name to postfix to many DT properties, while parsing them. * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. * @@ -157,6 +158,7 @@ struct device_opp {

unsigned int *supported_hw; unsigned int supported_hw_count; + const char *prop_name;

#ifdef CONFIG_DEBUG_FS struct dentry *dentry; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 3a85110..95403d2 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -58,6 +58,8 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev); int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count); void dev_pm_opp_put_supported_hw(struct device *dev); +int dev_pm_opp_set_prop_name(struct device *dev, const char *name); +void dev_pm_opp_put_prop_name(struct device *dev); #else static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { @@ -142,6 +144,13 @@ static inline int dev_pm_opp_set_supported_hw(struct device *dev,

static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}

+static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name) +{ + return -EINVAL; +} + +static inline void dev_pm_opp_put_prop_name(struct device *dev) {} + #endif /* CONFIG_PM_OPP */

#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)

From: Pi-Cheng Chen pi-cheng.chen@linaro.org

Set cpu_dev->id in cpumask first when setting up cpumask for CPUs that share the same OPP table. This might be helpful when handling cpumask without the original CPU bitfield set.

Signed-off-by: Pi-Cheng Chen pi-cheng.chen@linaro.org Acked-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit d9de19b1cc013433ad293365b5b3902ec73dfd60) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/cpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c index 7b445e8..9f0c155 100644 --- a/drivers/base/power/opp/cpu.c +++ b/drivers/base/power/opp/cpu.c @@ -214,7 +214,6 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table); /* * Works only for OPP v2 bindings. * - * cpumask should be already set to mask of cpu_dev->id. * Returns -ENOENT if operating-points-v2 bindings aren't supported. */ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) @@ -230,6 +229,8 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask return -ENOENT; }

+ cpumask_set_cpu(cpu_dev->id, cpumask); + /* OPPs are shared ? */ if (!of_property_read_bool(np, "opp-shared")) goto put_cpu_node;

From: Arnd Bergmann arnd@arndb.de

gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c:

cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here

The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls.

This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization.

Signed-off-by: Arnd Bergmann arnd@arndb.de Acked-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit b331bc20d9281213f7fb67912638e0fb5baeb324) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 90d6408..68232fe 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -141,15 +141,16 @@ static int allocate_resources(int cpu, struct device **cdev,

try_again: cpu_reg = regulator_get_optional(cpu_dev, reg); - if (IS_ERR(cpu_reg)) { + ret = PTR_ERR_OR_ZERO(cpu_reg); + if (ret) { /* * If cpu's regulator supply node is present, but regulator is * not yet registered, we should try defering probe. */ - if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + if (ret == -EPROBE_DEFER) { dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", cpu); - return -EPROBE_DEFER; + return ret; }

/* Try with "cpu-supply" */ @@ -158,18 +159,16 @@ try_again: goto try_again; }

- dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n", - cpu, PTR_ERR(cpu_reg)); + dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret); }

cpu_clk = clk_get(cpu_dev, NULL); - if (IS_ERR(cpu_clk)) { + ret = PTR_ERR_OR_ZERO(cpu_clk); + if (ret) { /* put regulator */ if (!IS_ERR(cpu_reg)) regulator_put(cpu_reg);

- ret = PTR_ERR(cpu_clk); - /* * If cpu's clk node is present, but clock is not yet * registered, we should try defering probe.

From: Viresh Kumar viresh.kumar@linaro.org

Disable any OPPs where the connected regulator isn't able to provide the specified voltage.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 7d34d56ef3349cd5f29cf7aab6650f3414fa81b9) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 1e22b71..71545be 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -687,6 +687,22 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev, return opp; }

+static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, + struct device_opp *dev_opp) +{ + struct regulator *reg = dev_opp->regulator; + + if (!IS_ERR(reg) && + !regulator_is_supported_voltage(reg, opp->u_volt_min, + opp->u_volt_max)) { + pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", + __func__, opp->u_volt_min, opp->u_volt_max); + return false; + } + + return true; +} + static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct device_opp *dev_opp) { @@ -728,6 +744,12 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n", __func__, ret);

+ if (!_opp_supported_by_regulators(new_opp, dev_opp)) { + new_opp->available = false; + dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n", + __func__, new_opp->rate); + } + return 0; }

From: Viresh Kumar viresh.kumar@linaro.org

In few use cases (like: cpufreq), it is desired to get the maximum latency for changing OPPs. Add support for that.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 2174344765f472895c076d703c9cdc58215e1393) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 17 +++++++++++++++++ include/linux/pm_opp.h | 6 ++++++ 2 files changed, 23 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index ffe2406..b0f5c72 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -290,6 +290,23 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_volt_latency);

/** + * dev_pm_opp_get_max_transition_latency() - Get max transition latency in + * nanoseconds + * @dev: device for which we do this operation + * + * Return: This function returns the max transition latency, in nanoseconds, to + * switch from one OPP to other. + * + * Locking: This function takes rcu_read_lock(). + */ +unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev) +{ + return dev_pm_opp_get_max_volt_latency(dev) + + dev_pm_opp_get_max_clock_latency(dev); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency); + +/** * dev_pm_opp_get_suspend_opp() - Get suspend opp * @dev: device for which we do this operation * diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 5daa430..59da3d9 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -35,6 +35,7 @@ bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); int dev_pm_opp_get_opp_count(struct device *dev); unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev); unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev); +unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev); struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev);

struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, @@ -94,6 +95,11 @@ static inline unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) return 0; }

+static inline unsigned long dev_pm_opp_get_max_transition_latency(struct device *dev) +{ + return 0; +} + static inline struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev) { return NULL;

From: Viresh Kumar viresh.kumar@linaro.org

OPP core has got almost everything now to manage device's OPP transitions, the only thing left is device's clk. Get that as well.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit d54974c2513f487e9e70fbdc79c5da51c53e23da) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 15 +++++++++++++++ drivers/base/power/opp/opp.h | 3 +++ 2 files changed, 18 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 4fafa73..7d7749c 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -13,6 +13,7 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/clk.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/slab.h> @@ -583,6 +584,7 @@ static struct device_opp *_add_device_opp(struct device *dev) struct device_opp *dev_opp; struct device_list_opp *list_dev; struct device_node *np; + int ret;

/* Check for existing list for 'dev' first */ dev_opp = _find_device_opp(dev); @@ -620,6 +622,15 @@ static struct device_opp *_add_device_opp(struct device *dev) of_node_put(np); }

+ /* Find clk for the device */ + dev_opp->clk = clk_get(dev, NULL); + if (IS_ERR(dev_opp->clk)) { + ret = PTR_ERR(dev_opp->clk); + if (ret != -EPROBE_DEFER) + dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, + ret); + } + srcu_init_notifier_head(&dev_opp->srcu_head); INIT_LIST_HEAD(&dev_opp->opp_list);

@@ -661,6 +672,10 @@ static void _remove_device_opp(struct device_opp *dev_opp) if (!IS_ERR_OR_NULL(dev_opp->regulator)) return;

+ /* Release clk */ + if (!IS_ERR(dev_opp->clk)) + clk_put(dev_opp->clk); + list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp, node);

diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index fe44beb..4f1bdfc 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -22,6 +22,7 @@ #include <linux/rculist.h> #include <linux/rcupdate.h>

+struct clk; struct regulator;

/* Lock to allow exclusive modification to the device and opp lists */ @@ -134,6 +135,7 @@ struct device_list_opp { * @supported_hw: Array of version number to support. * @supported_hw_count: Number of elements in supported_hw array. * @prop_name: A name to postfix to many DT properties, while parsing them. + * @clk: Device's clock handle * @regulator: Supply regulator * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. @@ -168,6 +170,7 @@ struct device_opp { unsigned int *supported_hw; unsigned int supported_hw_count; const char *prop_name; + struct clk *clk; struct regulator *regulator;

#ifdef CONFIG_DEBUG_FS

From: Jon Hunter jonathanh@nvidia.com

Commit 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator) causes a crash to happen on Tegra124 Jetson TK1 when using the DFLL clock source for the CPU. The DFLL manages the voltage itself and so there is no regulator specified for the OPPs and so we get a crash when we try to dereference the regulator pointer. Fix this by checking to see if the regulator IS_ERR_OR_NULL before dereferencing it.

Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator) Signed-off-by: Jon Hunter jonathanh@nvidia.com Reported-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Acked-by: Viresh Kumar viresh.kumar@linaro.org [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com

(cherry picked from commit 78ecc56247f0ec2bc0cf6f2f2af69e98d99767bc) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index ab711c2..d7cd4e2 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -975,7 +975,7 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, { struct regulator *reg = dev_opp->regulator;

- if (!IS_ERR(reg) && + if (!IS_ERR_OR_NULL(reg) && !regulator_is_supported_voltage(reg, opp->u_volt_min, opp->u_volt_max)) { pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",

From: Viresh Kumar viresh.kumar@linaro.org

We are currently required to do two checks for regulator pointer: IS_ERR() and IS_NULL().

And multiple instances are reported, about both of these not being used consistently and so resulting in crashes.

Fix that by initializing regulator pointer with an error value and checking it only against an error.

This makes code more consistent and more efficient.

Fixes: 7d34d56ef334 (PM / OPP: Disable OPPs that aren't supported by the regulator) Reported-and-tested-by: Jon Hunter jonathanh@nvidia.com Reported-and-tested-by: Tony Lindgren tony@atomide.com Reported-and-tested-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Viresh Kumar viresh.kumar@linaro.org [ rjw: Initialize to -ENXIO ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com

(cherry picked from commit 0c717d0f9cb46259dce5272705adce64a2d646d9) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 19fd7e7..5fb2f06 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -257,7 +257,7 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) }

reg = dev_opp->regulator; - if (IS_ERR_OR_NULL(reg)) { + if (IS_ERR(reg)) { /* Regulator may not be required for device */ if (reg) dev_err(dev, "%s: Invalid regulator (%ld)\n", __func__, @@ -798,6 +798,9 @@ static struct device_opp *_add_device_opp(struct device *dev) of_node_put(np); }

+ /* Set regulator to a non-NULL error value */ + dev_opp->regulator = ERR_PTR(-ENXIO); + /* Find clk for the device */ dev_opp->clk = clk_get(dev, NULL); if (IS_ERR(dev_opp->clk)) { @@ -845,7 +848,7 @@ static void _remove_device_opp(struct device_opp *dev_opp) if (dev_opp->prop_name) return;

- if (!IS_ERR_OR_NULL(dev_opp->regulator)) + if (!IS_ERR(dev_opp->regulator)) return;

/* Release clk */ @@ -975,7 +978,7 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, { struct regulator *reg = dev_opp->regulator;

- if (!IS_ERR_OR_NULL(reg) && + if (!IS_ERR(reg) && !regulator_is_supported_voltage(reg, opp->u_volt_min, opp->u_volt_max)) { pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n", @@ -1441,7 +1444,7 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name) }

/* Already have a regulator set */ - if (WARN_ON(!IS_ERR_OR_NULL(dev_opp->regulator))) { + if (WARN_ON(!IS_ERR(dev_opp->regulator))) { ret = -EBUSY; goto err; } @@ -1492,7 +1495,7 @@ void dev_pm_opp_put_regulator(struct device *dev) goto unlock; }

- if (IS_ERR_OR_NULL(dev_opp->regulator)) { + if (IS_ERR(dev_opp->regulator)) { dev_err(dev, "%s: Doesn't have regulator set\n", __func__); goto unlock; } @@ -1501,7 +1504,7 @@ void dev_pm_opp_put_regulator(struct device *dev) WARN_ON(!list_empty(&dev_opp->opp_list));

regulator_put(dev_opp->regulator); - dev_opp->regulator = ERR_PTR(-EINVAL); + dev_opp->regulator = ERR_PTR(-ENXIO);

/* Try freeing device_opp if this was the last blocking resource */ _remove_device_opp(dev_opp);

From: Viresh Kumar viresh.kumar@linaro.org

Stephen pointed out recently, that few structures always confuse him as they aren't named properly. And this patch tries to address that:

Names are updated as: - device_opp or dev_opp -> opp_table - dev_opp_list -> opp_tables - dev_opp_list_lock -> opp_table_lock - device_list_opp -> opp_device (it was never a list, but a structure) - list_dev -> opp_dev - And similar changes in comments and function names as well.

This also fixes checkpatch warnings that were generated with this patch.

No functional changes.

Suggested-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 2c2709dc6921c5d246b686521f932c73a20f428f) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/base/power/opp/core.c | 752 ++++++++++++++++++++------------------- drivers/base/power/opp/cpu.c | 22 +- drivers/base/power/opp/debugfs.c | 85 +++-- drivers/base/power/opp/opp.h | 61 ++-- 4 files changed, 461 insertions(+), 459 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index bdae09c..433b600 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -25,40 +25,40 @@ #include "opp.h"

/* - * The root of the list of all devices. All device_opp structures branch off - * from here, with each device_opp containing the list of opp it supports in + * The root of the list of all opp-tables. All opp_table structures branch off + * from here, with each opp_table containing the list of opps it supports in * various states of availability. */ -static LIST_HEAD(dev_opp_list); +static LIST_HEAD(opp_tables); /* Lock to allow exclusive modification to the device and opp lists */ -DEFINE_MUTEX(dev_opp_list_lock); +DEFINE_MUTEX(opp_table_lock);

#define opp_rcu_lockdep_assert() \ do { \ RCU_LOCKDEP_WARN(!rcu_read_lock_held() && \ - !lockdep_is_held(&dev_opp_list_lock), \ - "Missing rcu_read_lock() or " \ - "dev_opp_list_lock protection"); \ + !lockdep_is_held(&opp_table_lock), \ + "Missing rcu_read_lock() or " \ + "opp_table_lock protection"); \ } while (0)

-static struct device_list_opp *_find_list_dev(const struct device *dev, - struct device_opp *dev_opp) +static struct opp_device *_find_opp_dev(const struct device *dev, + struct opp_table *opp_table) { - struct device_list_opp *list_dev; + struct opp_device *opp_dev;

- list_for_each_entry(list_dev, &dev_opp->dev_list, node) - if (list_dev->dev == dev) - return list_dev; + list_for_each_entry(opp_dev, &opp_table->dev_list, node) + if (opp_dev->dev == dev) + return opp_dev;

return NULL; }

-static struct device_opp *_managed_opp(const struct device_node *np) +static struct opp_table *_managed_opp(const struct device_node *np) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

- list_for_each_entry_rcu(dev_opp, &dev_opp_list, node) { - if (dev_opp->np == np) { + list_for_each_entry_rcu(opp_table, &opp_tables, node) { + if (opp_table->np == np) { /* * Multiple devices can point to the same OPP table and * so will have same node-pointer, np. @@ -66,7 +66,7 @@ static struct device_opp *_managed_opp(const struct device_node *np) * But the OPPs will be considered as shared only if the * OPP table contains a "opp-shared" property. */ - return dev_opp->shared_opp ? dev_opp : NULL; + return opp_table->shared_opp ? opp_table : NULL; } }

@@ -74,24 +74,24 @@ static struct device_opp *_managed_opp(const struct device_node *np) }

/** - * _find_device_opp() - find device_opp struct using device pointer - * @dev: device pointer used to lookup device OPPs + * _find_opp_table() - find opp_table struct using device pointer + * @dev: device pointer used to lookup OPP table * - * Search list of device OPPs for one containing matching device. Does a RCU - * reader operation to grab the pointer needed. + * Search OPP table for one containing matching device. Does a RCU reader + * operation to grab the pointer needed. * - * Return: pointer to 'struct device_opp' if found, otherwise -ENODEV or + * Return: pointer to 'struct opp_table' if found, otherwise -ENODEV or * -EINVAL based on type of error. * * Locking: For readers, this function must be called under rcu_read_lock(). - * device_opp is a RCU protected pointer, which means that device_opp is valid + * opp_table is a RCU protected pointer, which means that opp_table is valid * as long as we are under RCU lock. * - * For Writers, this function must be called with dev_opp_list_lock held. + * For Writers, this function must be called with opp_table_lock held. */ -struct device_opp *_find_device_opp(struct device *dev) +struct opp_table *_find_opp_table(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

opp_rcu_lockdep_assert();

@@ -100,9 +100,9 @@ struct device_opp *_find_device_opp(struct device *dev) return ERR_PTR(-EINVAL); }

- list_for_each_entry_rcu(dev_opp, &dev_opp_list, node) - if (_find_list_dev(dev, dev_opp)) - return dev_opp; + list_for_each_entry_rcu(opp_table, &opp_tables, node) + if (_find_opp_dev(dev, opp_table)) + return opp_table;

return ERR_PTR(-ENODEV); } @@ -215,16 +215,16 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_is_turbo); */ unsigned long dev_pm_opp_get_max_clock_latency(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table; unsigned long clock_latency_ns;

rcu_read_lock();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) clock_latency_ns = 0; else - clock_latency_ns = dev_opp->clock_latency_ns_max; + clock_latency_ns = opp_table->clock_latency_ns_max;

rcu_read_unlock(); return clock_latency_ns; @@ -241,7 +241,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency); */ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *opp; struct regulator *reg; unsigned long latency_ns = 0; @@ -250,13 +250,13 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)

rcu_read_lock();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { rcu_read_unlock(); return 0; }

- reg = dev_opp->regulator; + reg = opp_table->regulator; if (IS_ERR(reg)) { /* Regulator may not be required for device */ if (reg) @@ -266,7 +266,7 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) return 0; }

- list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(opp, &opp_table->opp_list, node) { if (!opp->available) continue;

@@ -279,7 +279,7 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) rcu_read_unlock();

/* - * The caller needs to ensure that dev_opp (and hence the regulator) + * The caller needs to ensure that opp_table (and hence the regulator) * isn't freed, while we are executing this routine. */ ret = regulator_set_voltage_time(reg, min_uV, max_uV); @@ -322,21 +322,21 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_transition_latency); */ struct dev_pm_opp *dev_pm_opp_get_suspend_opp(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

opp_rcu_lockdep_assert();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp) || !dev_opp->suspend_opp || - !dev_opp->suspend_opp->available) + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table) || !opp_table->suspend_opp || + !opp_table->suspend_opp->available) return NULL;

- return dev_opp->suspend_opp; + return opp_table->suspend_opp; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_suspend_opp);

/** - * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list + * dev_pm_opp_get_opp_count() - Get number of opps available in the opp table * @dev: device for which we do this operation * * Return: This function returns the number of available opps if there are any, @@ -346,21 +346,21 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_suspend_opp); */ int dev_pm_opp_get_opp_count(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *temp_opp; int count = 0;

rcu_read_lock();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - count = PTR_ERR(dev_opp); - dev_err(dev, "%s: device OPP not found (%d)\n", + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + count = PTR_ERR(opp_table); + dev_err(dev, "%s: OPP table not found (%d)\n", __func__, count); goto out_unlock; }

- list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available) count++; } @@ -377,7 +377,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); * @freq: frequency to search for * @available: true/false - match for available opp * - * Return: Searches for exact match in the opp list and returns pointer to the + * Return: Searches for exact match in the opp table and returns pointer to the * matching opp if found, else returns ERR_PTR in case of error and should * be handled using IS_ERR. Error return values can be: * EINVAL: for bad pointer @@ -401,19 +401,20 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, unsigned long freq, bool available) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);

opp_rcu_lockdep_assert();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - int r = PTR_ERR(dev_opp); - dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r); + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + int r = PTR_ERR(opp_table); + + dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r); return ERR_PTR(r); }

- list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available == available && temp_opp->rate == freq) { opp = temp_opp; @@ -449,7 +450,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, unsigned long *freq) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);

opp_rcu_lockdep_assert(); @@ -459,11 +460,11 @@ struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, return ERR_PTR(-EINVAL); }

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) - return ERR_CAST(dev_opp); + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return ERR_CAST(opp_table);

- list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available && temp_opp->rate >= *freq) { opp = temp_opp; *freq = opp->rate; @@ -499,7 +500,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, unsigned long *freq) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);

opp_rcu_lockdep_assert(); @@ -509,11 +510,11 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, return ERR_PTR(-EINVAL); }

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) - return ERR_CAST(dev_opp); + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return ERR_CAST(opp_table);

- list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(temp_opp, &opp_table->opp_list, node) { if (temp_opp->available) { /* go to the next node, before choosing prev */ if (temp_opp->rate > *freq) @@ -530,24 +531,24 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);

/* - * The caller needs to ensure that device_opp (and hence the clk) isn't freed, + * The caller needs to ensure that opp_table (and hence the clk) isn't freed, * while clk returned here is used. */ static struct clk *_get_opp_clk(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct clk *clk;

rcu_read_lock();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { dev_err(dev, "%s: device opp doesn't exist\n", __func__); - clk = ERR_CAST(dev_opp); + clk = ERR_CAST(opp_table); goto unlock; }

- clk = dev_opp->clk; + clk = opp_table->clk; if (IS_ERR(clk)) dev_err(dev, "%s: No clock available for the device\n", __func__); @@ -594,7 +595,7 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg, */ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *old_opp, *opp; struct regulator *reg; struct clk *clk; @@ -628,11 +629,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)

rcu_read_lock();

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { dev_err(dev, "%s: device opp doesn't exist\n", __func__); rcu_read_unlock(); - return PTR_ERR(dev_opp); + return PTR_ERR(opp_table); }

old_opp = dev_pm_opp_find_freq_ceil(dev, &old_freq); @@ -658,7 +659,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) u_volt_min = opp->u_volt_min; u_volt_max = opp->u_volt_max;

- reg = dev_opp->regulator; + reg = opp_table->regulator;

rcu_read_unlock();

@@ -705,81 +706,81 @@ restore_voltage: } EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);

-/* List-dev Helpers */ -static void _kfree_list_dev_rcu(struct rcu_head *head) +/* OPP-dev Helpers */ +static void _kfree_opp_dev_rcu(struct rcu_head *head) { - struct device_list_opp *list_dev; + struct opp_device *opp_dev;

- list_dev = container_of(head, struct device_list_opp, rcu_head); - kfree_rcu(list_dev, rcu_head); + opp_dev = container_of(head, struct opp_device, rcu_head); + kfree_rcu(opp_dev, rcu_head); }

-static void _remove_list_dev(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static void _remove_opp_dev(struct opp_device *opp_dev, + struct opp_table *opp_table) { - opp_debug_unregister(list_dev, dev_opp); - list_del(&list_dev->node); - call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head, - _kfree_list_dev_rcu); + opp_debug_unregister(opp_dev, opp_table); + list_del(&opp_dev->node); + call_srcu(&opp_table->srcu_head.srcu, &opp_dev->rcu_head, + _kfree_opp_dev_rcu); }

-struct device_list_opp *_add_list_dev(const struct device *dev, - struct device_opp *dev_opp) +struct opp_device *_add_opp_dev(const struct device *dev, + struct opp_table *opp_table) { - struct device_list_opp *list_dev; + struct opp_device *opp_dev; int ret;

- list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL); - if (!list_dev) + opp_dev = kzalloc(sizeof(*opp_dev), GFP_KERNEL); + if (!opp_dev) return NULL;

- /* Initialize list-dev */ - list_dev->dev = dev; - list_add_rcu(&list_dev->node, &dev_opp->dev_list); + /* Initialize opp-dev */ + opp_dev->dev = dev; + list_add_rcu(&opp_dev->node, &opp_table->dev_list);

- /* Create debugfs entries for the dev_opp */ - ret = opp_debug_register(list_dev, dev_opp); + /* Create debugfs entries for the opp_table */ + ret = opp_debug_register(opp_dev, opp_table); if (ret) dev_err(dev, "%s: Failed to register opp debugfs (%d)\n", __func__, ret);

- return list_dev; + return opp_dev; }

/** - * _add_device_opp() - Find device OPP table or allocate a new one + * _add_opp_table() - Find OPP table or allocate a new one * @dev: device for which we do this operation * * It tries to find an existing table first, if it couldn't find one, it * allocates a new OPP table and returns that. * - * Return: valid device_opp pointer if success, else NULL. + * Return: valid opp_table pointer if success, else NULL. */ -static struct device_opp *_add_device_opp(struct device *dev) +static struct opp_table *_add_opp_table(struct device *dev) { - struct device_opp *dev_opp; - struct device_list_opp *list_dev; + struct opp_table *opp_table; + struct opp_device *opp_dev; struct device_node *np; int ret;

- /* Check for existing list for 'dev' first */ - dev_opp = _find_device_opp(dev); - if (!IS_ERR(dev_opp)) - return dev_opp; + /* Check for existing table for 'dev' first */ + opp_table = _find_opp_table(dev); + if (!IS_ERR(opp_table)) + return opp_table;

/* - * Allocate a new device OPP table. In the infrequent case where a new + * Allocate a new OPP table. In the infrequent case where a new * device is needed to be added, we pay this penalty. */ - dev_opp = kzalloc(sizeof(*dev_opp), GFP_KERNEL); - if (!dev_opp) + opp_table = kzalloc(sizeof(*opp_table), GFP_KERNEL); + if (!opp_table) return NULL;

- INIT_LIST_HEAD(&dev_opp->dev_list); + INIT_LIST_HEAD(&opp_table->dev_list);

- list_dev = _add_list_dev(dev, dev_opp); - if (!list_dev) { - kfree(dev_opp); + opp_dev = _add_opp_dev(dev, opp_table); + if (!opp_dev) { + kfree(opp_table); return NULL; }

@@ -792,79 +793,80 @@ static struct device_opp *_add_device_opp(struct device *dev) u32 val;

if (!of_property_read_u32(np, "clock-latency", &val)) - dev_opp->clock_latency_ns_max = val; + opp_table->clock_latency_ns_max = val; of_property_read_u32(np, "voltage-tolerance", - &dev_opp->voltage_tolerance_v1); + &opp_table->voltage_tolerance_v1); of_node_put(np); }

/* Set regulator to a non-NULL error value */ - dev_opp->regulator = ERR_PTR(-ENXIO); + opp_table->regulator = ERR_PTR(-ENXIO);

/* Find clk for the device */ - dev_opp->clk = clk_get(dev, NULL); - if (IS_ERR(dev_opp->clk)) { - ret = PTR_ERR(dev_opp->clk); + opp_table->clk = clk_get(dev, NULL); + if (IS_ERR(opp_table->clk)) { + ret = PTR_ERR(opp_table->clk); if (ret != -EPROBE_DEFER) dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret); }

- srcu_init_notifier_head(&dev_opp->srcu_head); - INIT_LIST_HEAD(&dev_opp->opp_list); + srcu_init_notifier_head(&opp_table->srcu_head); + INIT_LIST_HEAD(&opp_table->opp_list);

- /* Secure the device list modification */ - list_add_rcu(&dev_opp->node, &dev_opp_list); - return dev_opp; + /* Secure the device table modification */ + list_add_rcu(&opp_table->node, &opp_tables); + return opp_table; }

/** - * _kfree_device_rcu() - Free device_opp RCU handler + * _kfree_device_rcu() - Free opp_table RCU handler * @head: RCU head */ static void _kfree_device_rcu(struct rcu_head *head) { - struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head); + struct opp_table *opp_table = container_of(head, struct opp_table, + rcu_head);

- kfree_rcu(device_opp, rcu_head); + kfree_rcu(opp_table, rcu_head); }

/** - * _remove_device_opp() - Removes a device OPP table - * @dev_opp: device OPP table to be removed. + * _remove_opp_table() - Removes a OPP table + * @opp_table: OPP table to be removed. * - * Removes/frees device OPP table it it doesn't contain any OPPs. + * Removes/frees OPP table if it doesn't contain any OPPs. */ -static void _remove_device_opp(struct device_opp *dev_opp) +static void _remove_opp_table(struct opp_table *opp_table) { - struct device_list_opp *list_dev; + struct opp_device *opp_dev;

- if (!list_empty(&dev_opp->opp_list)) + if (!list_empty(&opp_table->opp_list)) return;

- if (dev_opp->supported_hw) + if (opp_table->supported_hw) return;

- if (dev_opp->prop_name) + if (opp_table->prop_name) return;

- if (!IS_ERR(dev_opp->regulator)) + if (!IS_ERR(opp_table->regulator)) return;

/* Release clk */ - if (!IS_ERR(dev_opp->clk)) - clk_put(dev_opp->clk); + if (!IS_ERR(opp_table->clk)) + clk_put(opp_table->clk);

- list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp, - node); + opp_dev = list_first_entry(&opp_table->dev_list, struct opp_device, + node);

- _remove_list_dev(list_dev, dev_opp); + _remove_opp_dev(opp_dev, opp_table);

/* dev_list must be empty now */ - WARN_ON(!list_empty(&dev_opp->dev_list)); + WARN_ON(!list_empty(&opp_table->dev_list));

- list_del_rcu(&dev_opp->node); - call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head, + list_del_rcu(&opp_table->node); + call_srcu(&opp_table->srcu_head.srcu, &opp_table->rcu_head, _kfree_device_rcu); }

@@ -881,17 +883,17 @@ static void _kfree_opp_rcu(struct rcu_head *head)

/** * _opp_remove() - Remove an OPP from a table definition - * @dev_opp: points back to the device_opp struct this opp belongs to + * @opp_table: points back to the opp_table struct this opp belongs to * @opp: pointer to the OPP to remove * @notify: OPP_EVENT_REMOVE notification should be sent or not * - * This function removes an opp definition from the opp list. + * This function removes an opp definition from the opp table. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * It is assumed that the caller holds required mutex for an RCU updater * strategy. */ -static void _opp_remove(struct device_opp *dev_opp, +static void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify) { /* @@ -899,22 +901,23 @@ static void _opp_remove(struct device_opp *dev_opp, * frequency/voltage list. */ if (notify) - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp); + srcu_notifier_call_chain(&opp_table->srcu_head, + OPP_EVENT_REMOVE, opp); opp_debug_remove_one(opp); list_del_rcu(&opp->node); - call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); + call_srcu(&opp_table->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);

- _remove_device_opp(dev_opp); + _remove_opp_table(opp_table); }

/** - * dev_pm_opp_remove() - Remove an OPP from OPP list + * dev_pm_opp_remove() - Remove an OPP from OPP table * @dev: device for which we do this operation * @freq: OPP to remove with matching 'freq' * - * This function removes an opp from the opp list. + * This function removes an opp from the opp table. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -923,17 +926,17 @@ static void _opp_remove(struct device_opp *dev_opp, void dev_pm_opp_remove(struct device *dev, unsigned long freq) { struct dev_pm_opp *opp; - struct device_opp *dev_opp; + struct opp_table *opp_table; bool found = false;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) goto unlock;

- list_for_each_entry(opp, &dev_opp->opp_list, node) { + list_for_each_entry(opp, &opp_table->opp_list, node) { if (opp->rate == freq) { found = true; break; @@ -946,14 +949,14 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq) goto unlock; }

- _opp_remove(dev_opp, opp, true); + _opp_remove(opp_table, opp, true); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_remove);

static struct dev_pm_opp *_allocate_opp(struct device *dev, - struct device_opp **dev_opp) + struct opp_table **opp_table) { struct dev_pm_opp *opp;

@@ -964,8 +967,8 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev,

INIT_LIST_HEAD(&opp->node);

- *dev_opp = _add_device_opp(dev); - if (!*dev_opp) { + *opp_table = _add_opp_table(dev); + if (!*opp_table) { kfree(opp); return NULL; } @@ -974,9 +977,9 @@ static struct dev_pm_opp *_allocate_opp(struct device *dev, }

static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, - struct device_opp *dev_opp) + struct opp_table *opp_table) { - struct regulator *reg = dev_opp->regulator; + struct regulator *reg = opp_table->regulator;

if (!IS_ERR(reg) && !regulator_is_supported_voltage(reg, opp->u_volt_min, @@ -990,21 +993,21 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, }

static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, - struct device_opp *dev_opp) + struct opp_table *opp_table) { struct dev_pm_opp *opp; - struct list_head *head = &dev_opp->opp_list; + struct list_head *head = &opp_table->opp_list; int ret;

/* * Insert new OPP in order of increasing frequency and discard if * already present. * - * Need to use &dev_opp->opp_list in the condition part of the 'for' + * Need to use &opp_table->opp_list in the condition part of the 'for' * loop, don't replace it with head otherwise it will become an infinite * loop. */ - list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) { + list_for_each_entry_rcu(opp, &opp_table->opp_list, node) { if (new_opp->rate > opp->rate) { head = &opp->node; continue; @@ -1022,15 +1025,15 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, 0 : -EEXIST; }

- new_opp->dev_opp = dev_opp; + new_opp->opp_table = opp_table; list_add_rcu(&new_opp->node, head);

- ret = opp_debug_create_one(new_opp, dev_opp); + ret = opp_debug_create_one(new_opp, opp_table); if (ret) dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n", __func__, ret);

- if (!_opp_supported_by_regulators(new_opp, dev_opp)) { + if (!_opp_supported_by_regulators(new_opp, opp_table)) { new_opp->available = false; dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n", __func__, new_opp->rate); @@ -1046,14 +1049,14 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, * @u_volt: Voltage in uVolts for this OPP * @dynamic: Dynamically added OPPs. * - * This function adds an opp definition to the opp list and returns status. + * This function adds an opp definition to the opp table and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove. * * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table * and freed by dev_pm_opp_of_remove_table. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1069,15 +1072,15 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *new_opp; unsigned long tol; int ret;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- new_opp = _allocate_opp(dev, &dev_opp); + new_opp = _allocate_opp(dev, &opp_table); if (!new_opp) { ret = -ENOMEM; goto unlock; @@ -1085,36 +1088,36 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,

/* populate the opp table */ new_opp->rate = freq; - tol = u_volt * dev_opp->voltage_tolerance_v1 / 100; + tol = u_volt * opp_table->voltage_tolerance_v1 / 100; new_opp->u_volt = u_volt; new_opp->u_volt_min = u_volt - tol; new_opp->u_volt_max = u_volt + tol; new_opp->available = true; new_opp->dynamic = dynamic;

- ret = _opp_add(dev, new_opp, dev_opp); + ret = _opp_add(dev, new_opp, opp_table); if (ret) goto free_opp;

- mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

/* * Notify the changes in the availability of the operable * frequency/voltage list. */ - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); + srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); return 0;

free_opp: - _opp_remove(dev_opp, new_opp, false); + _opp_remove(opp_table, new_opp, false); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); return ret; }

/* TODO: Support multiple regulators */ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, - struct device_opp *dev_opp) + struct opp_table *opp_table) { u32 microvolt[3] = {0}; u32 val; @@ -1123,9 +1126,9 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, char name[NAME_MAX];

/* Search for "opp-microvolt-<name>" */ - if (dev_opp->prop_name) { + if (opp_table->prop_name) { snprintf(name, sizeof(name), "opp-microvolt-%s", - dev_opp->prop_name); + opp_table->prop_name); prop = of_find_property(opp->np, name, NULL); }

@@ -1171,9 +1174,9 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,

/* Search for "opp-microamp-<name>" */ prop = NULL; - if (dev_opp->prop_name) { + if (opp_table->prop_name) { snprintf(name, sizeof(name), "opp-microamp-%s", - dev_opp->prop_name); + opp_table->prop_name); prop = of_find_property(opp->np, name, NULL); }

@@ -1200,7 +1203,7 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, * OPPs, which are available for those versions, based on its 'opp-supported-hw' * property. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1209,44 +1212,44 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count) { - struct device_opp *dev_opp; + struct opp_table *opp_table; int ret = 0;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- dev_opp = _add_device_opp(dev); - if (!dev_opp) { + opp_table = _add_opp_table(dev); + if (!opp_table) { ret = -ENOMEM; goto unlock; }

- /* Make sure there are no concurrent readers while updating dev_opp */ - WARN_ON(!list_empty(&dev_opp->opp_list)); + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list));

- /* Do we already have a version hierarchy associated with dev_opp? */ - if (dev_opp->supported_hw) { + /* Do we already have a version hierarchy associated with opp_table? */ + if (opp_table->supported_hw) { dev_err(dev, "%s: Already have supported hardware list\n", __func__); ret = -EBUSY; goto err; }

- dev_opp->supported_hw = kmemdup(versions, count * sizeof(*versions), + opp_table->supported_hw = kmemdup(versions, count * sizeof(*versions), GFP_KERNEL); - if (!dev_opp->supported_hw) { + if (!opp_table->supported_hw) { ret = -ENOMEM; goto err; }

- dev_opp->supported_hw_count = count; - mutex_unlock(&dev_opp_list_lock); + opp_table->supported_hw_count = count; + mutex_unlock(&opp_table_lock); return 0;

err: - _remove_device_opp(dev_opp); + _remove_opp_table(opp_table); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

return ret; } @@ -1257,10 +1260,10 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw); * @dev: Device for which supported-hw has to be put. * * This is required only for the V2 bindings, and is called for a matching - * dev_pm_opp_set_supported_hw(). Until this is called, the device_opp structure + * dev_pm_opp_set_supported_hw(). Until this is called, the opp_table structure * will not be freed. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1268,36 +1271,37 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw); */ void dev_pm_opp_put_supported_hw(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- /* Check for existing list for 'dev' first */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp)); + /* Check for existing table for 'dev' first */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + dev_err(dev, "Failed to find opp_table: %ld\n", + PTR_ERR(opp_table)); goto unlock; }

- /* Make sure there are no concurrent readers while updating dev_opp */ - WARN_ON(!list_empty(&dev_opp->opp_list)); + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list));

- if (!dev_opp->supported_hw) { + if (!opp_table->supported_hw) { dev_err(dev, "%s: Doesn't have supported hardware list\n", __func__); goto unlock; }

- kfree(dev_opp->supported_hw); - dev_opp->supported_hw = NULL; - dev_opp->supported_hw_count = 0; + kfree(opp_table->supported_hw); + opp_table->supported_hw = NULL; + opp_table->supported_hw_count = 0;

- /* Try freeing device_opp if this was the last blocking resource */ - _remove_device_opp(dev_opp); + /* Try freeing opp_table if this was the last blocking resource */ + _remove_opp_table(opp_table);

unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);

@@ -1311,7 +1315,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw); * which the extension will apply are opp-microvolt and opp-microamp. OPP core * should postfix the property name with -<name> while looking for them. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1319,42 +1323,42 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw); */ int dev_pm_opp_set_prop_name(struct device *dev, const char *name) { - struct device_opp *dev_opp; + struct opp_table *opp_table; int ret = 0;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- dev_opp = _add_device_opp(dev); - if (!dev_opp) { + opp_table = _add_opp_table(dev); + if (!opp_table) { ret = -ENOMEM; goto unlock; }

- /* Make sure there are no concurrent readers while updating dev_opp */ - WARN_ON(!list_empty(&dev_opp->opp_list)); + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list));

- /* Do we already have a prop-name associated with dev_opp? */ - if (dev_opp->prop_name) { + /* Do we already have a prop-name associated with opp_table? */ + if (opp_table->prop_name) { dev_err(dev, "%s: Already have prop-name %s\n", __func__, - dev_opp->prop_name); + opp_table->prop_name); ret = -EBUSY; goto err; }

- dev_opp->prop_name = kstrdup(name, GFP_KERNEL); - if (!dev_opp->prop_name) { + opp_table->prop_name = kstrdup(name, GFP_KERNEL); + if (!opp_table->prop_name) { ret = -ENOMEM; goto err; }

- mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); return 0;

err: - _remove_device_opp(dev_opp); + _remove_opp_table(opp_table); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

return ret; } @@ -1365,10 +1369,10 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name); * @dev: Device for which the prop-name has to be put. * * This is required only for the V2 bindings, and is called for a matching - * dev_pm_opp_set_prop_name(). Until this is called, the device_opp structure + * dev_pm_opp_set_prop_name(). Until this is called, the opp_table structure * will not be freed. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1376,34 +1380,35 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name); */ void dev_pm_opp_put_prop_name(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- /* Check for existing list for 'dev' first */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp)); + /* Check for existing table for 'dev' first */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + dev_err(dev, "Failed to find opp_table: %ld\n", + PTR_ERR(opp_table)); goto unlock; }

- /* Make sure there are no concurrent readers while updating dev_opp */ - WARN_ON(!list_empty(&dev_opp->opp_list)); + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list));

- if (!dev_opp->prop_name) { + if (!opp_table->prop_name) { dev_err(dev, "%s: Doesn't have a prop-name\n", __func__); goto unlock; }

- kfree(dev_opp->prop_name); - dev_opp->prop_name = NULL; + kfree(opp_table->prop_name); + opp_table->prop_name = NULL;

- /* Try freeing device_opp if this was the last blocking resource */ - _remove_device_opp(dev_opp); + /* Try freeing opp_table if this was the last blocking resource */ + _remove_opp_table(opp_table);

unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);

@@ -1417,7 +1422,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name); * * This must be called before any OPPs are initialized for the device. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1425,26 +1430,26 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name); */ int dev_pm_opp_set_regulator(struct device *dev, const char *name) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct regulator *reg; int ret;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- dev_opp = _add_device_opp(dev); - if (!dev_opp) { + opp_table = _add_opp_table(dev); + if (!opp_table) { ret = -ENOMEM; goto unlock; }

/* This should be called before OPPs are initialized */ - if (WARN_ON(!list_empty(&dev_opp->opp_list))) { + if (WARN_ON(!list_empty(&opp_table->opp_list))) { ret = -EBUSY; goto err; }

/* Already have a regulator set */ - if (WARN_ON(!IS_ERR(dev_opp->regulator))) { + if (WARN_ON(!IS_ERR(opp_table->regulator))) { ret = -EBUSY; goto err; } @@ -1458,15 +1463,15 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name) goto err; }

- dev_opp->regulator = reg; + opp_table->regulator = reg;

- mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); return 0;

err: - _remove_device_opp(dev_opp); + _remove_opp_table(opp_table); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

return ret; } @@ -1476,7 +1481,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator); * dev_pm_opp_put_regulator() - Releases resources blocked for regulator * @dev: Device for which regulator was set. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1484,44 +1489,45 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator); */ void dev_pm_opp_put_regulator(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- /* Check for existing list for 'dev' first */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp)); + /* Check for existing table for 'dev' first */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + dev_err(dev, "Failed to find opp_table: %ld\n", + PTR_ERR(opp_table)); goto unlock; }

- if (IS_ERR(dev_opp->regulator)) { + if (IS_ERR(opp_table->regulator)) { dev_err(dev, "%s: Doesn't have regulator set\n", __func__); goto unlock; }

- /* Make sure there are no concurrent readers while updating dev_opp */ - WARN_ON(!list_empty(&dev_opp->opp_list)); + /* Make sure there are no concurrent readers while updating opp_table */ + WARN_ON(!list_empty(&opp_table->opp_list));

- regulator_put(dev_opp->regulator); - dev_opp->regulator = ERR_PTR(-ENXIO); + regulator_put(opp_table->regulator); + opp_table->regulator = ERR_PTR(-ENXIO);

- /* Try freeing device_opp if this was the last blocking resource */ - _remove_device_opp(dev_opp); + /* Try freeing opp_table if this was the last blocking resource */ + _remove_opp_table(opp_table);

unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);

-static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp, +static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, struct device_node *np) { - unsigned int count = dev_opp->supported_hw_count; + unsigned int count = opp_table->supported_hw_count; u32 version; int ret;

- if (!dev_opp->supported_hw) + if (!opp_table->supported_hw) return true;

while (count--) { @@ -1534,7 +1540,7 @@ static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp, }

/* Both of these are bitwise masks of the versions */ - if (!(version & dev_opp->supported_hw[count])) + if (!(version & opp_table->supported_hw[count])) return false; }

@@ -1546,11 +1552,11 @@ static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp, * @dev: device for which we do this operation * @np: device node * - * This function adds an opp definition to the opp list and returns status. The + * This function adds an opp definition to the opp table and returns status. The * opp can be controlled using dev_pm_opp_enable/disable functions and may be * removed by dev_pm_opp_remove. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1566,16 +1572,16 @@ static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp, */ static int _opp_add_static_v2(struct device *dev, struct device_node *np) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *new_opp; u64 rate; u32 val; int ret;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- new_opp = _allocate_opp(dev, &dev_opp); + new_opp = _allocate_opp(dev, &opp_table); if (!new_opp) { ret = -ENOMEM; goto unlock; @@ -1588,7 +1594,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) }

/* Check if the OPP supports hardware's hierarchy of versions or not */ - if (!_opp_is_supported(dev, dev_opp, np)) { + if (!_opp_is_supported(dev, opp_table, np)) { dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate); goto free_opp; } @@ -1608,30 +1614,30 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) if (!of_property_read_u32(np, "clock-latency-ns", &val)) new_opp->clock_latency_ns = val;

- ret = opp_parse_supplies(new_opp, dev, dev_opp); + ret = opp_parse_supplies(new_opp, dev, opp_table); if (ret) goto free_opp;

- ret = _opp_add(dev, new_opp, dev_opp); + ret = _opp_add(dev, new_opp, opp_table); if (ret) goto free_opp;

/* OPP to select on device suspend */ if (of_property_read_bool(np, "opp-suspend")) { - if (dev_opp->suspend_opp) { + if (opp_table->suspend_opp) { dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n", - __func__, dev_opp->suspend_opp->rate, + __func__, opp_table->suspend_opp->rate, new_opp->rate); } else { new_opp->suspend = true; - dev_opp->suspend_opp = new_opp; + opp_table->suspend_opp = new_opp; } }

- if (new_opp->clock_latency_ns > dev_opp->clock_latency_ns_max) - dev_opp->clock_latency_ns_max = new_opp->clock_latency_ns; + if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max) + opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;

- mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n", __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt, @@ -1642,13 +1648,13 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np) * Notify the changes in the availability of the operable * frequency/voltage list. */ - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); + srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp); return 0;

free_opp: - _opp_remove(dev_opp, new_opp, false); + _opp_remove(opp_table, new_opp, false); unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); return ret; }

@@ -1658,11 +1664,11 @@ unlock: * @freq: Frequency in Hz for this OPP * @u_volt: Voltage in uVolts for this OPP * - * This function adds an opp definition to the opp list and returns status. + * This function adds an opp definition to the opp table and returns status. * The opp is made available by default and it can be controlled using * dev_pm_opp_enable/disable functions. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1694,7 +1700,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_add); * copy operation, returns 0 if no modification was done OR modification was * successful. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks to * keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1703,7 +1709,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_add); static int _opp_set_availability(struct device *dev, unsigned long freq, bool availability_req) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); int r = 0;

@@ -1712,18 +1718,18 @@ static int _opp_set_availability(struct device *dev, unsigned long freq, if (!new_opp) return -ENOMEM;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- /* Find the device_opp */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - r = PTR_ERR(dev_opp); + /* Find the opp_table */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + r = PTR_ERR(opp_table); dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); goto unlock; }

/* Do we have the frequency? */ - list_for_each_entry(tmp_opp, &dev_opp->opp_list, node) { + list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { if (tmp_opp->rate == freq) { opp = tmp_opp; break; @@ -1744,21 +1750,21 @@ static int _opp_set_availability(struct device *dev, unsigned long freq, new_opp->available = availability_req;

list_replace_rcu(&opp->node, &new_opp->node); - mutex_unlock(&dev_opp_list_lock); - call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu); + mutex_unlock(&opp_table_lock); + call_srcu(&opp_table->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);

/* Notify the change of the OPP availability */ if (availability_req) - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ENABLE, - new_opp); + srcu_notifier_call_chain(&opp_table->srcu_head, + OPP_EVENT_ENABLE, new_opp); else - srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_DISABLE, - new_opp); + srcu_notifier_call_chain(&opp_table->srcu_head, + OPP_EVENT_DISABLE, new_opp);

return 0;

unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); kfree(new_opp); return r; } @@ -1772,7 +1778,7 @@ unlock: * corresponding error value. It is meant to be used for users an OPP available * after being temporarily made unavailable with dev_pm_opp_disable. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the * integrity of the internal data structures. Callers should ensure that * this function is *NOT* called under RCU protection or in contexts where @@ -1798,7 +1804,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_enable); * control by users to make this OPP not available until the circumstances are * right to make it available again (with a call to dev_pm_opp_enable). * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the * integrity of the internal data structures. Callers should ensure that * this function is *NOT* called under RCU protection or in contexts where @@ -1816,26 +1822,26 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_disable);

/** * dev_pm_opp_get_notifier() - find notifier_head of the device with opp - * @dev: device pointer used to lookup device OPPs. + * @dev: device pointer used to lookup OPP table. * * Return: pointer to notifier head if found, otherwise -ENODEV or * -EINVAL based on type of error casted as pointer. value must be checked * with IS_ERR to determine valid pointer or error result. * - * Locking: This function must be called under rcu_read_lock(). dev_opp is a RCU - * protected pointer. The reason for the same is that the opp pointer which is - * returned will remain valid for use with opp_get_{voltage, freq} only while + * Locking: This function must be called under rcu_read_lock(). opp_table is a + * RCU protected pointer. The reason for the same is that the opp pointer which + * is returned will remain valid for use with opp_get_{voltage, freq} only while * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) { - struct device_opp *dev_opp = _find_device_opp(dev); + struct opp_table *opp_table = _find_opp_table(dev);

- if (IS_ERR(dev_opp)) - return ERR_CAST(dev_opp); /* matching type */ + if (IS_ERR(opp_table)) + return ERR_CAST(opp_table); /* matching type */

- return &dev_opp->srcu_head; + return &opp_table->srcu_head; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);

@@ -1843,11 +1849,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); /** * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT * entries - * @dev: device pointer used to lookup device OPPs. + * @dev: device pointer used to lookup OPP table. * * Free OPPs created using static entries present in DT. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where @@ -1855,38 +1861,38 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier); */ void dev_pm_opp_of_remove_table(struct device *dev) { - struct device_opp *dev_opp; + struct opp_table *opp_table; struct dev_pm_opp *opp, *tmp;

- /* Hold our list modification lock here */ - mutex_lock(&dev_opp_list_lock); + /* Hold our table modification lock here */ + mutex_lock(&opp_table_lock);

- /* Check for existing list for 'dev' */ - dev_opp = _find_device_opp(dev); - if (IS_ERR(dev_opp)) { - int error = PTR_ERR(dev_opp); + /* Check for existing table for 'dev' */ + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) { + int error = PTR_ERR(opp_table);

if (error != -ENODEV) - WARN(1, "%s: dev_opp: %d\n", + WARN(1, "%s: opp_table: %d\n", IS_ERR_OR_NULL(dev) ? "Invalid device" : dev_name(dev), error); goto unlock; }

- /* Find if dev_opp manages a single device */ - if (list_is_singular(&dev_opp->dev_list)) { + /* Find if opp_table manages a single device */ + if (list_is_singular(&opp_table->dev_list)) { /* Free static OPPs */ - list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) { + list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) { if (!opp->dynamic) - _opp_remove(dev_opp, opp, true); + _opp_remove(opp_table, opp, true); } } else { - _remove_list_dev(_find_list_dev(dev, dev_opp), dev_opp); + _remove_opp_dev(_find_opp_dev(dev, opp_table), opp_table); }

unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);

@@ -1907,22 +1913,22 @@ struct device_node *_of_get_opp_desc_node(struct device *dev) static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) { struct device_node *np; - struct device_opp *dev_opp; + struct opp_table *opp_table; int ret = 0, count = 0;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- dev_opp = _managed_opp(opp_np); - if (dev_opp) { + opp_table = _managed_opp(opp_np); + if (opp_table) { /* OPPs are already managed */ - if (!_add_list_dev(dev, dev_opp)) + if (!_add_opp_dev(dev, opp_table)) ret = -ENOMEM; - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock); return ret; } - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

- /* We have opp-list node now, iterate over it and add OPPs */ + /* We have opp-table node now, iterate over it and add OPPs */ for_each_available_child_of_node(opp_np, np) { count++;

@@ -1938,19 +1944,19 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np) if (WARN_ON(!count)) return -ENOENT;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- dev_opp = _find_device_opp(dev); - if (WARN_ON(IS_ERR(dev_opp))) { - ret = PTR_ERR(dev_opp); - mutex_unlock(&dev_opp_list_lock); + opp_table = _find_opp_table(dev); + if (WARN_ON(IS_ERR(opp_table))) { + ret = PTR_ERR(opp_table); + mutex_unlock(&opp_table_lock); goto free_table; }

- dev_opp->np = opp_np; - dev_opp->shared_opp = of_property_read_bool(opp_np, "opp-shared"); + opp_table->np = opp_np; + opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");

- mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

return 0;

@@ -1979,7 +1985,7 @@ static int _of_add_opp_table_v1(struct device *dev) */ nr = prop->length / sizeof(u32); if (nr % 2) { - dev_err(dev, "%s: Invalid OPP list\n", __func__); + dev_err(dev, "%s: Invalid OPP table\n", __func__); return -EINVAL; }

@@ -1999,11 +2005,11 @@ static int _of_add_opp_table_v1(struct device *dev)

/** * dev_pm_opp_of_add_table() - Initialize opp table from device tree - * @dev: device pointer used to lookup device OPPs. + * @dev: device pointer used to lookup OPP table. * * Register the initial OPP table with the OPP library for given device. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Hence this function indirectly uses RCU updater strategy with mutex locks * to keep the integrity of the internal data structures. Callers should ensure * that this function is *NOT* called under RCU protection or in contexts where diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c index 9f0c155..ba2bdbd 100644 --- a/drivers/base/power/opp/cpu.c +++ b/drivers/base/power/opp/cpu.c @@ -31,7 +31,7 @@ * @table: Cpufreq table returned back to caller * * Generate a cpufreq table for a provided device- this assumes that the - * opp list is already initialized and ready for usage. + * opp table is already initialized and ready for usage. * * This function allocates required memory for the cpufreq table. It is * expected that the caller does the required maintenance such as freeing @@ -44,7 +44,7 @@ * WARNING: It is important for the callers to ensure refreshing their copy of * the table if any of the mentioned functions have been invoked in the interim. * - * Locking: The internal device_opp and opp structures are RCU protected. + * Locking: The internal opp_table and opp structures are RCU protected. * Since we just use the regular accessor functions to access the internal data * structures, we use RCU read lock inside this function. As a result, users of * this function DONOT need to use explicit locks for invoking. @@ -122,15 +122,15 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); /* Required only for V1 bindings, as v2 can manage it from DT itself */ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) { - struct device_list_opp *list_dev; - struct device_opp *dev_opp; + struct opp_device *opp_dev; + struct opp_table *opp_table; struct device *dev; int cpu, ret = 0;

- mutex_lock(&dev_opp_list_lock); + mutex_lock(&opp_table_lock);

- dev_opp = _find_device_opp(cpu_dev); - if (IS_ERR(dev_opp)) { + opp_table = _find_opp_table(cpu_dev); + if (IS_ERR(opp_table)) { ret = -EINVAL; goto unlock; } @@ -146,15 +146,15 @@ int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask) continue; }

- list_dev = _add_list_dev(dev, dev_opp); - if (!list_dev) { - dev_err(dev, "%s: failed to add list-dev for cpu%d device\n", + opp_dev = _add_opp_dev(dev, opp_table); + if (!opp_dev) { + dev_err(dev, "%s: failed to add opp-dev for cpu%d device\n", __func__, cpu); continue; } } unlock: - mutex_unlock(&dev_opp_list_lock); + mutex_unlock(&opp_table_lock);

return ret; } diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c index ddfe477..ef1ae6b 100644 --- a/drivers/base/power/opp/debugfs.c +++ b/drivers/base/power/opp/debugfs.c @@ -34,9 +34,9 @@ void opp_debug_remove_one(struct dev_pm_opp *opp) debugfs_remove_recursive(opp->dentry); }

-int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp) +int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table) { - struct dentry *pdentry = dev_opp->dentry; + struct dentry *pdentry = opp_table->dentry; struct dentry *d; char name[25]; /* 20 chars for 64 bit value + 5 (opp:\0) */

@@ -83,52 +83,52 @@ int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp) return 0; }

-static int device_opp_debug_create_dir(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static int opp_list_debug_create_dir(struct opp_device *opp_dev, + struct opp_table *opp_table) { - const struct device *dev = list_dev->dev; + const struct device *dev = opp_dev->dev; struct dentry *d;

- opp_set_dev_name(dev, dev_opp->dentry_name); + opp_set_dev_name(dev, opp_table->dentry_name);

/* Create device specific directory */ - d = debugfs_create_dir(dev_opp->dentry_name, rootdir); + d = debugfs_create_dir(opp_table->dentry_name, rootdir); if (!d) { dev_err(dev, "%s: Failed to create debugfs dir\n", __func__); return -ENOMEM; }

- list_dev->dentry = d; - dev_opp->dentry = d; + opp_dev->dentry = d; + opp_table->dentry = d;

return 0; }

-static int device_opp_debug_create_link(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static int opp_list_debug_create_link(struct opp_device *opp_dev, + struct opp_table *opp_table) { - const struct device *dev = list_dev->dev; + const struct device *dev = opp_dev->dev; char name[NAME_MAX]; struct dentry *d;

- opp_set_dev_name(list_dev->dev, name); + opp_set_dev_name(opp_dev->dev, name);

/* Create device specific directory link */ - d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name); + d = debugfs_create_symlink(name, rootdir, opp_table->dentry_name); if (!d) { dev_err(dev, "%s: Failed to create link\n", __func__); return -ENOMEM; }

- list_dev->dentry = d; + opp_dev->dentry = d;

return 0; }

/** * opp_debug_register - add a device opp node to the debugfs 'opp' directory - * @list_dev: list-dev pointer for device - * @dev_opp: the device-opp being added + * @opp_dev: opp-dev pointer for device + * @opp_table: the device-opp being added * * Dynamically adds device specific directory in debugfs 'opp' directory. If the * device-opp is shared with other devices, then links will be created for all @@ -136,73 +136,72 @@ static int device_opp_debug_create_link(struct device_list_opp *list_dev, * * Return: 0 on success, otherwise negative error. */ -int opp_debug_register(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +int opp_debug_register(struct opp_device *opp_dev, struct opp_table *opp_table) { if (!rootdir) { pr_debug("%s: Uninitialized rootdir\n", __func__); return -EINVAL; }

- if (dev_opp->dentry) - return device_opp_debug_create_link(list_dev, dev_opp); + if (opp_table->dentry) + return opp_list_debug_create_link(opp_dev, opp_table);

- return device_opp_debug_create_dir(list_dev, dev_opp); + return opp_list_debug_create_dir(opp_dev, opp_table); }

-static void opp_migrate_dentry(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static void opp_migrate_dentry(struct opp_device *opp_dev, + struct opp_table *opp_table) { - struct device_list_opp *new_dev; + struct opp_device *new_dev; const struct device *dev; struct dentry *dentry;

- /* Look for next list-dev */ - list_for_each_entry(new_dev, &dev_opp->dev_list, node) - if (new_dev != list_dev) + /* Look for next opp-dev */ + list_for_each_entry(new_dev, &opp_table->dev_list, node) + if (new_dev != opp_dev) break;

/* new_dev is guaranteed to be valid here */ dev = new_dev->dev; debugfs_remove_recursive(new_dev->dentry);

- opp_set_dev_name(dev, dev_opp->dentry_name); + opp_set_dev_name(dev, opp_table->dentry_name);

- dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir, - dev_opp->dentry_name); + dentry = debugfs_rename(rootdir, opp_dev->dentry, rootdir, + opp_table->dentry_name); if (!dentry) { dev_err(dev, "%s: Failed to rename link from: %s to %s\n", - __func__, dev_name(list_dev->dev), dev_name(dev)); + __func__, dev_name(opp_dev->dev), dev_name(dev)); return; }

new_dev->dentry = dentry; - dev_opp->dentry = dentry; + opp_table->dentry = dentry; }

/** * opp_debug_unregister - remove a device opp node from debugfs opp directory - * @list_dev: list-dev pointer for device - * @dev_opp: the device-opp being removed + * @opp_dev: opp-dev pointer for device + * @opp_table: the device-opp being removed * * Dynamically removes device specific directory from debugfs 'opp' directory. */ -void opp_debug_unregister(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +void opp_debug_unregister(struct opp_device *opp_dev, + struct opp_table *opp_table) { - if (list_dev->dentry == dev_opp->dentry) { + if (opp_dev->dentry == opp_table->dentry) { /* Move the real dentry object under another device */ - if (!list_is_singular(&dev_opp->dev_list)) { - opp_migrate_dentry(list_dev, dev_opp); + if (!list_is_singular(&opp_table->dev_list)) { + opp_migrate_dentry(opp_dev, opp_table); goto out; } - dev_opp->dentry = NULL; + opp_table->dentry = NULL; }

- debugfs_remove_recursive(list_dev->dentry); + debugfs_remove_recursive(opp_dev->dentry);

out: - list_dev->dentry = NULL; + opp_dev->dentry = NULL; }

static int __init opp_debug_init(void) diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index 4f1bdfc..f67f806 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -26,12 +26,12 @@ struct clk; struct regulator;

/* Lock to allow exclusive modification to the device and opp lists */ -extern struct mutex dev_opp_list_lock; +extern struct mutex opp_table_lock;

/* * Internal data structure organization with the OPP layer library is as * follows: - * dev_opp_list (root) + * opp_tables (root) * |- device 1 (represents voltage domain 1) * | |- opp 1 (availability, freq, voltage) * | |- opp 2 .. @@ -40,18 +40,18 @@ extern struct mutex dev_opp_list_lock; * |- device 2 (represents the next voltage domain) * ... * `- device m (represents mth voltage domain) - * device 1, 2.. are represented by dev_opp structure while each opp + * device 1, 2.. are represented by opp_table structure while each opp * is represented by the opp structure. */

/** * struct dev_pm_opp - Generic OPP description structure - * @node: opp list node. The nodes are maintained throughout the lifetime + * @node: opp table node. The nodes are maintained throughout the lifetime * of boot. It is expected only an optimal set of OPPs are * added to the library by the SoC framework. - * RCU usage: opp list is traversed with RCU locks. node + * RCU usage: opp table is traversed with RCU locks. node * modification is possible realtime, hence the modifications - * are protected by the dev_opp_list_lock for integrity. + * are protected by the opp_table_lock for integrity. * IMPORTANT: the opp nodes should be maintained in increasing * order. * @available: true/false - marks if this OPP as available or not @@ -65,7 +65,7 @@ extern struct mutex dev_opp_list_lock; * @u_amp: Maximum current drawn by the device in microamperes * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's * frequency from any other OPP's frequency. - * @dev_opp: points back to the device_opp struct this opp belongs to + * @opp_table: points back to the opp_table struct this opp belongs to * @rcu_head: RCU callback head used for deferred freeing * @np: OPP's device node. * @dentry: debugfs dentry pointer (per opp) @@ -87,7 +87,7 @@ struct dev_pm_opp { unsigned long u_amp; unsigned long clock_latency_ns;

- struct device_opp *dev_opp; + struct opp_table *opp_table; struct rcu_head rcu_head;

struct device_node *np; @@ -98,16 +98,16 @@ struct dev_pm_opp { };

/** - * struct device_list_opp - devices managed by 'struct device_opp' + * struct opp_device - devices managed by 'struct opp_table' * @node: list node * @dev: device to which the struct object belongs * @rcu_head: RCU callback head used for deferred freeing * @dentry: debugfs dentry pointer (per device) * - * This is an internal data structure maintaining the list of devices that are - * managed by 'struct device_opp'. + * This is an internal data structure maintaining the devices that are managed + * by 'struct opp_table'. */ -struct device_list_opp { +struct opp_device { struct list_head node; const struct device *dev; struct rcu_head rcu_head; @@ -118,16 +118,16 @@ struct device_list_opp { };

/** - * struct device_opp - Device opp structure - * @node: list node - contains the devices with OPPs that + * struct opp_table - Device opp structure + * @node: table node - contains the devices with OPPs that * have been registered. Nodes once added are not modified in this - * list. - * RCU usage: nodes are not modified in the list of device_opp, - * however addition is possible and is secured by dev_opp_list_lock + * table. + * RCU usage: nodes are not modified in the table of opp_table, + * however addition is possible and is secured by opp_table_lock * @srcu_head: notifier head to notify the OPP availability changes. * @rcu_head: RCU callback head used for deferred freeing * @dev_list: list of devices that share these OPPs - * @opp_list: list of opps + * @opp_list: table of opps * @np: struct device_node pointer for opp's DT node. * @clock_latency_ns_max: Max clock latency in nanoseconds. * @shared_opp: OPP is shared between multiple devices. @@ -150,7 +150,7 @@ struct device_list_opp { * need to wait for the grace period of both of them before freeing any * resources. And so we have used kfree_rcu() from within call_srcu() handlers. */ -struct device_opp { +struct opp_table { struct list_head node;

struct srcu_notifier_head srcu_head; @@ -180,30 +180,27 @@ struct device_opp { };

/* Routines internal to opp core */ -struct device_opp *_find_device_opp(struct device *dev); -struct device_list_opp *_add_list_dev(const struct device *dev, - struct device_opp *dev_opp); +struct opp_table *_find_opp_table(struct device *dev); +struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table); struct device_node *_of_get_opp_desc_node(struct device *dev);

#ifdef CONFIG_DEBUG_FS void opp_debug_remove_one(struct dev_pm_opp *opp); -int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp); -int opp_debug_register(struct device_list_opp *list_dev, - struct device_opp *dev_opp); -void opp_debug_unregister(struct device_list_opp *list_dev, - struct device_opp *dev_opp); +int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table); +int opp_debug_register(struct opp_device *opp_dev, struct opp_table *opp_table); +void opp_debug_unregister(struct opp_device *opp_dev, struct opp_table *opp_table); #else static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}

static inline int opp_debug_create_one(struct dev_pm_opp *opp, - struct device_opp *dev_opp) + struct opp_table *opp_table) { return 0; } -static inline int opp_debug_register(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static inline int opp_debug_register(struct opp_device *opp_dev, + struct opp_table *opp_table) { return 0; }

-static inline void opp_debug_unregister(struct device_list_opp *list_dev, - struct device_opp *dev_opp) +static inline void opp_debug_unregister(struct opp_device *opp_dev, + struct opp_table *opp_table) { } #endif /* DEBUG_FS */

From: Andrzej Hajda a.hajda@samsung.com

The function can return negative values so it should be assigned to signed type.

The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci.

Link: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda a.hajda@samsung.com Acked-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 929ca89c305a6ed7a4149115be99af6d73c36918) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index fc61cab..0ca74d0 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -50,7 +50,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) struct private_data *priv = policy->driver_data; struct device *cpu_dev = priv->cpu_dev; struct regulator *cpu_reg = priv->cpu_reg; - unsigned long volt = 0, volt_old = 0, tol = 0; + unsigned long volt = 0, tol = 0; + int volt_old = 0; unsigned int old_freq, new_freq; long freq_Hz, freq_exact; int ret; @@ -83,7 +84,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) opp_freq / 1000, volt); }

- dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n", old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1, new_freq / 1000, volt ? volt / 1000 : -1);

From: Viresh Kumar viresh.kumar@linaro.org

That's the real purpose of this field, i.e. to take special care of old OPP V1 bindings. Lets name it accordingly, so that it can be used elsewhere.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 457e99e60a8f5a40b7da204c0bfc8a86ad2161b9) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index ace0168..0047d20 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -199,7 +199,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) struct dev_pm_opp *suspend_opp; unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; - bool need_update = false; + bool opp_v1 = false; int ret;

ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); @@ -223,7 +223,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) * finding shared-OPPs for backward compatibility. */ if (ret == -ENOENT) - need_update = true; + opp_v1 = true; else goto out_node_put; } @@ -251,7 +251,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_free_opp; }

- if (need_update) { + if (opp_v1) { struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();

if (!pd || !pd->independent_clocks)

From: Viresh Kumar viresh.kumar@linaro.org

OPP core can handle the regulators by itself, and but it needs to know the name of the regulator to fetch. Add support for that.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 050794aaebbb9f2c2c50b340b6998273e7c64189) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 4c9f8a8..2af75f8 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -34,6 +34,7 @@ struct private_data { struct regulator *cpu_reg; struct thermal_cooling_device *cdev; unsigned int voltage_tolerance; /* in percentage */ + const char *reg_name; };

static struct freq_attr *cpufreq_dt_attr[] = { @@ -119,6 +120,30 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) return ret; }

+/* + * An earlier version of opp-v1 bindings used to name the regulator + * "cpu0-supply", we still need to handle that for backwards compatibility. + */ +static const char *find_supply_name(struct device *dev, struct device_node *np) +{ + struct property *pp; + int cpu = dev->id; + + /* Try "cpu0" for older DTs */ + if (!cpu) { + pp = of_find_property(np, "cpu0-supply", NULL); + if (pp) + return "cpu0"; + } + + pp = of_find_property(np, "cpu-supply", NULL); + if (pp) + return "cpu"; + + dev_dbg(dev, "no regulator for cpu%d\n", cpu); + return NULL; +} + static int allocate_resources(int cpu, struct device **cdev, struct regulator **creg, struct clk **cclk) { @@ -200,6 +225,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; bool opp_v1 = false; + const char *name; int ret;

ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); @@ -229,6 +255,20 @@ static int cpufreq_init(struct cpufreq_policy *policy) }

/* + * OPP layer will be taking care of regulators now, but it needs to know + * the name of the regulator first. + */ + name = find_supply_name(cpu_dev, np); + if (name) { + ret = dev_pm_opp_set_regulator(cpu_dev, name); + if (ret) { + dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n", + policy->cpu, ret); + goto out_node_put; + } + } + + /* * Initialize OPP tables for all policy->cpus. They will be shared by * all CPUs which have marked their CPUs shared with OPP bindings. * @@ -273,6 +313,7 @@ static int cpufreq_init(struct cpufreq_policy *policy) goto out_free_opp; }

+ priv->reg_name = name; of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);

transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev); @@ -366,6 +407,8 @@ out_free_priv: kfree(priv); out_free_opp: dev_pm_opp_of_cpumask_remove_table(policy->cpus); + if (name) + dev_pm_opp_put_regulator(cpu_dev); out_node_put: of_node_put(np); out_put_reg_clk: @@ -383,6 +426,9 @@ static int cpufreq_exit(struct cpufreq_policy *policy) cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); + if (priv->reg_name) + dev_pm_opp_put_regulator(priv->cpu_dev); + clk_put(policy->clk); if (!IS_ERR(priv->cpu_reg)) regulator_put(priv->cpu_reg);

From: Viresh Kumar viresh.kumar@linaro.org

OPP layer has all the information now to calculate transition latency (clock_latency + voltage_latency). Lets reuse the OPP layer helper dev_pm_opp_get_max_transition_latency() instead of open coding the same in cpufreq-dt driver.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit 755b888ff098c9f762717a9fbda7e05b16619069) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 48 ++++---------------------------------------- 1 file changed, 4 insertions(+), 44 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index c3fe894..6f80ce5 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -222,7 +222,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) struct regulator *cpu_reg; struct clk *cpu_clk; struct dev_pm_opp *suspend_opp; - unsigned long min_uV = ~0, max_uV = 0; unsigned int transition_latency; bool opp_v1 = false; const char *name; @@ -316,49 +315,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) priv->reg_name = name; of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);

- transition_latency = dev_pm_opp_get_max_clock_latency(cpu_dev); - if (!transition_latency) - transition_latency = CPUFREQ_ETERNAL; - - if (!IS_ERR(cpu_reg)) { - unsigned long opp_freq = 0; - - /* - * Disable any OPPs where the connected regulator isn't able to - * provide the specified voltage and record minimum and maximum - * voltage levels. - */ - while (1) { - struct dev_pm_opp *opp; - unsigned long opp_uV, tol_uV; - - rcu_read_lock(); - opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq); - if (IS_ERR(opp)) { - rcu_read_unlock(); - break; - } - opp_uV = dev_pm_opp_get_voltage(opp); - rcu_read_unlock(); - - tol_uV = opp_uV * priv->voltage_tolerance / 100; - if (regulator_is_supported_voltage(cpu_reg, - opp_uV - tol_uV, - opp_uV + tol_uV)) { - if (opp_uV < min_uV) - min_uV = opp_uV; - if (opp_uV > max_uV) - max_uV = opp_uV; - } - - opp_freq++; - } - - ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); - if (ret > 0) - transition_latency += ret * 1000; - } - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); @@ -393,6 +349,10 @@ static int cpufreq_init(struct cpufreq_policy *policy) cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; }

+ transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); + if (!transition_latency) + transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = transition_latency;

of_node_put(np);

From: Viresh Kumar viresh.kumar@linaro.org

Its already done by core and we don't need to get it anymore. And so, we don't need to get of node in cpufreq_init() anymore, move that to find_supply_name() instead.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Reviewed-by: Stephen Boyd sboyd@codeaurora.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com (cherry picked from commit df2c8ec28e73d47392b8cb24828c15c54819da41) Signed-off-by: Alex Shi alex.shi@linaro.org --- drivers/cpufreq/cpufreq-dt.c | 46 ++++++++++++++++++++++---------------------- 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 150a172..bbafd7b 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -33,7 +33,6 @@ struct private_data { struct device *cpu_dev; struct regulator *cpu_reg; struct thermal_cooling_device *cdev; - unsigned int voltage_tolerance; /* in percentage */ const char *reg_name; };

@@ -55,24 +54,38 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index) * An earlier version of opp-v1 bindings used to name the regulator * "cpu0-supply", we still need to handle that for backwards compatibility. */ -static const char *find_supply_name(struct device *dev, struct device_node *np) +static const char *find_supply_name(struct device *dev) { + struct device_node *np; struct property *pp; int cpu = dev->id; + const char *name = NULL; + + np = of_node_get(dev->of_node); + + /* This must be valid for sure */ + if (WARN_ON(!np)) + return NULL;

/* Try "cpu0" for older DTs */ if (!cpu) { pp = of_find_property(np, "cpu0-supply", NULL); - if (pp) - return "cpu0"; + if (pp) { + name = "cpu0"; + goto node_put; + } }

pp = of_find_property(np, "cpu-supply", NULL); - if (pp) - return "cpu"; + if (pp) { + name = "cpu"; + goto node_put; + }

dev_dbg(dev, "no regulator for cpu%d\n", cpu); - return NULL; +node_put: + of_node_put(np); + return name; }

static int allocate_resources(int cpu, struct device **cdev, @@ -147,7 +160,6 @@ try_again: static int cpufreq_init(struct cpufreq_policy *policy) { struct cpufreq_frequency_table *freq_table; - struct device_node *np; struct private_data *priv; struct device *cpu_dev; struct regulator *cpu_reg; @@ -164,13 +176,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) return ret; }

- np = of_node_get(cpu_dev->of_node); - if (!np) { - dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu); - ret = -ENOENT; - goto out_put_reg_clk; - } - /* Get OPP-sharing information from "operating-points-v2" bindings */ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus); if (ret) { @@ -181,20 +186,20 @@ static int cpufreq_init(struct cpufreq_policy *policy) if (ret == -ENOENT) opp_v1 = true; else - goto out_node_put; + goto out_put_reg_clk; }

/* * OPP layer will be taking care of regulators now, but it needs to know * the name of the regulator first. */ - name = find_supply_name(cpu_dev, np); + name = find_supply_name(cpu_dev); if (name) { ret = dev_pm_opp_set_regulator(cpu_dev, name); if (ret) { dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n", policy->cpu, ret); - goto out_node_put; + goto out_put_reg_clk; } }

@@ -244,7 +249,6 @@ static int cpufreq_init(struct cpufreq_policy *policy) }

priv->reg_name = name; - of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);

ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { @@ -286,8 +290,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)

policy->cpuinfo.transition_latency = transition_latency;

- of_node_put(np); - return 0;

out_free_cpufreq_table: @@ -298,8 +300,6 @@ out_free_opp: dev_pm_opp_of_cpumask_remove_table(policy->cpus); if (name) dev_pm_opp_put_regulator(cpu_dev); -out_node_put: - of_node_put(np); out_put_reg_clk: clk_put(cpu_clk); if (!IS_ERR(cpu_reg))