Tree/Branch: mainline Git describe: v3.15-8884-g2dc24b0 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.3 sec: PASS da850-evm 0 min 14.8 sec: PASS
arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS
arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.6 sec: PASS omap5-uevm 1 min 42.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS
arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 0 min 20.8 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.5 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.7 sec: PASS legacy,3530beagle 0 min 28.2 sec: PASS (Warnings: 1) omap4-panda 0 min 50.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 26.2 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 24.7 sec: PASS omap5-uevm 0 min 56.8 sec: PASS (Warnings: 1) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 16.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1)
arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 54.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 16.3 sec: PASS ste-snowball 1 min 14.7 sec: PASS tegra30-beaver 0 min 19.8 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 25.6 sec: PASS omap3-overo-tobi 0 min 22.6 sec: PASS omap3-overo-storm-tobi 0 min 23.3 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS exynos5420-arndale-octa 0 min 39.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 1 min 39.3 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.7 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.5 sec: PASS
arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.5 sec: FAIL
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.0 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.5 sec: FAIL exynos5250-arndale 0 min 30.5 sec: PASS exynos5410-smdk5410 0 min 27.2 sec: PASS
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL
arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1)
Console logs for failures =========================
arm-qcom_defconfig ------------------
qcom-apq8074-dragonboard: FAIL: last 40 lines of boot log: ----------------------------------------------------------
[ 1.514103] bfa0: 60000113 ffffffff [ 1.522264] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.525569] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.533208] [<c025866c>] (cpu_startup_entry) from [<c091caa8>] (start_kernel+0x2e8/0x344) [ 1.541279] [<c091caa8>] (start_kernel) from [<00208074>] (0x208074) [ 1.549520] CPU2: stopping [ 1.555943] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 1.558483] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.566726] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.574618] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.581647] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.589199] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.596569] Exception stack(0xee097f98 to 0xee097fe0) [ 1.604121] 7f80: 00000002 c085188c [ 1.609163] 7fa0: 00000050 00000000 ee096000 ee096000 ee096000 c09b31fc c097246c 512f06f0 [ 1.617322] 7fc0: c06d88ec c09b31fc 00000020 ee097fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.625489] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.633647] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.641109] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.649175] CPU3: stopping [ 1.656030] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 1.658658] [<c0214b74>] (unwind_backtrace) from [<c02122b8>] (show_stack+0x10/0x14) [ 1.666900] [<c02122b8>] (show_stack) from [<c06cb360>] (dump_stack+0x70/0xbc) [ 1.674792] [<c06cb360>] (dump_stack) from [<c0213cd0>] (handle_IPI+0x154/0x188) [ 1.681820] [<c0213cd0>] (handle_IPI) from [<c0208588>] (gic_handle_irq+0x58/0x60) [ 1.689373] [<c0208588>] (gic_handle_irq) from [<c06d06c0>] (__irq_svc+0x40/0x70) [ 1.696744] Exception stack(0xee099f98 to 0xee099fe0) [ 1.704293] 9f80: 00000003 c085188c [ 1.709337] 9fa0: 00000048 00000000 ee098000 ee098000 ee098000 c09b31fc c097246c 512f06f0 [ 1.717494] 9fc0: c06d88ec c09b31fc 00000020 ee099fe0 c020fc90 c020fc94 60000013 ffffffff [ 1.725662] [<c06d06c0>] (__irq_svc) from [<c020fc94>] (arch_cpu_idle+0x28/0x30) [ 1.733821] [<c020fc94>] (arch_cpu_idle) from [<c025866c>] (cpu_startup_entry+0x128/0x268) [ 1.741282] [<c025866c>] (cpu_startup_entry) from [<00208624>] (0x208624) [ 1.749352] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.749352] ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000
# PYBOOT: Time: 16.48 seconds. # PYBOOT: Result: FAIL
arm-exynos_defconfig --------------------
exynos5420-arndale-octa: FAIL: last 40 lines of boot log: ---------------------------------------------------------
[ 16.252204] of_get_named_gpiod_flags exited with status 0 [ 16.256327] mmcblk0: p1 p2 p3 p4 [ 16.259497] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.267035] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.271970] Modules linked in: [ 16.275007] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-08884-g2dc24b0 #1 [ 16.283590] Workqueue: kmmcd mmc_rescan [ 16.287396] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.292773] PC is at rescan_partitions+0xb4/0x290 [ 16.297447] LR is at 0xf00b8000 [ 16.300569] pc : [<c01afcd8>] lr : [<f00b8000>] psr: 20000113 [ 16.300569] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.312005] r10: 00000000 r9 : ef2f3040 r8 : ed6ff200 [ 16.317205] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.323704] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.330204] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.337482] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.343201] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.349527] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.353864] 5c80: c054c214 00000001 ef0b4000 c0387150 00000001 c05284f8 ed577598 c05283c8 [ 16.362008] 5ca0: eec24380 ed577468 eec24330 eec24280 00000000 ed577468 00000000 00000000 [ 16.370153] 5cc0: 00000000 eec24280 ed6ff200 eec24290 00000001 00000000 00000000 c00e305c [ 16.378298] 5ce0: c00e19fc 00000000 00000000 00000001 eec24280 00000000 ed6ff270 ed6ff20c [ 16.386443] 5d00: 00000000 ed577380 00000003 c00e32c0 c052a6cc 00000001 00000003 c0388418 [ 16.394589] 5d20: c052a6cc c00e1fcc ef0b5d34 c02222ec ed6ff240 00000001 eec24280 ed6ff200 [ 16.402734] 5d40: ed6ff270 ed6ff20c 00000000 ed577380 00000003 c01adbf0 c01aca44 ed6ff200 [ 16.410881] 5d60: 00000080 0b300000 00000002 ef2f8c00 ef2fec00 ef2f9800 ef2f9800 ef2f9abc [ 16.419026] 5d80: c02baca8 ef2fec00 ef2f9800 ef2fed88 ef0b5dd6 c02bbbac 00000056 ef2fec6c [ 16.427171] 5da0: 00000003 ef2f8c00 ef2fec00 c02bc7dc 00000003 ef0b5dd6 00000008 ed63d708 [ 16.435317] 5dc0: c046a0a8 ef2f9a98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.443462] 5de0: 00000001 ef2fec08 c058de1c 00000000 c054c19c 00000001 00000000 c054be48 [ 16.451607] 5e00: ef013c00 c02b112c c02b1114 c0225d90 00000000 ef2fec08 c0225f40 ef2f8808 [ 16.459753] 5e20: 00000000 c022456c ef351698 ef203b44 ef2fec08 ef2fec3c c054bd68 c0225c6c [ 16.467898] 5e40: ef2fec08 ef2fec08 c054bd68 c02253dc ef2fec08 00000000 ef2fec10 c0223a44 [ 16.476044] 5e60: ef013c00 c0381094 c047d27c ef0b5e84 00061a80 ef2fec00 ef2fec08 c047d228 [ 16.484190] 5e80: 00061a80 c03b10ac 00000000 c02b154c c047d228 c0452000 c047d1e4 00000001 [ 16.492335] 5ea0: ef2f8800 00000000 ef2f8800 c02b3f98 00061a80 40ff8080 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.45 seconds. # PYBOOT: Result: FAIL
arm-u8500_defconfig -------------------
ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------
[ 3.497314] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.505187] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.513183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.525115] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.532440] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.543914] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.552520] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.564453] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.571777] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.583251] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.591064] HS USB OTG: no transceiver configured [ 3.595764] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.603637] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.611663] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.623565] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.630889] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.642364] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.651000] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.662933] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.670227] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.681701] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.689514] HS USB OTG: no transceiver configured [ 3.694244] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.702087] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.710083] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.722015] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.729309] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.740814] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.749420] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.761352] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.768676] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.780151] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.787963] HS USB OTG: no transceiver configured [ 3.792663] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.800506] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.808532] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.51 seconds. # PYBOOT: Result: FAIL
Sachin,
On Wed, Jun 11, 2014 at 1:37 PM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: mainline Git describe: v3.15-8884-g2dc24b0 Failed boot tests (console logs at the end) =========================================== qcom-apq8074-dragonboard: FAIL: arm-qcom_defconfig exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig
Here's the full boot log from this failure.
Kevin
linaro-kernel@lists.linaro.org