Add AARCH64 specific support. This includes the following: - AARCH64 perf registers definition and hooks, - compat mode registers use, i.e. profiling a 32-bit binary on a 64-bit system, - unwinding using the dwarf information from the .debug_frame section of the ELF binary, - unwinding using the frame pointer information; in 64-bit and compat modes.
Note: support for unwinding using the dwarf information in compat mode requires some changes to the libunwind code. Those changes have been submitted on the libunwind ML and are in discussion.
Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been tested on ARMv8 using statically built 32-bit binaries.
Jean Pihet (4): ARM64: perf: add support for perf registers API ARM64: perf: wire up perf_regs and unwind support ARM64: perf: add support for frame pointer unwinding in compat mode ARM64: perf: support dwarf unwinding in compat mode
arch/arm64/Kconfig | 2 + arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 3 +- arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++--- arch/arm64/kernel/perf_regs.c | 44 ++++++++++++++++ tools/perf/arch/arm64/Makefile | 7 +++ tools/perf/arch/arm64/include/perf_regs.h | 88 +++++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/dwarf-regs.c | 80 ++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/unwind.c | 82 ++++++++++++++++++++++++++++ tools/perf/config/Makefile | 8 ++- 13 files changed, 422 insertions(+), 11 deletions(-) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c create mode 100644 tools/perf/arch/arm64/Makefile create mode 100644 tools/perf/arch/arm64/include/perf_regs.h create mode 100644 tools/perf/arch/arm64/util/dwarf-regs.c create mode 100644 tools/perf/arch/arm64/util/unwind.c
From: Jean Pihet jean.pihet@newoldbits.com
This patch implements the functions required for the perf registers API, allowing the perf tool to interface kernel register dumps with libunwind in order to provide userspace backtracing. Compat mode is also supported.
Only the general purpose user space registers are exported, i.e.: PERF_REG_ARM_X0, ... PERF_REG_ARM_X28, PERF_REG_ARM_FP, PERF_REG_ARM_LR, PERF_REG_ARM_SP, PERF_REG_ARM_PC and not the PERF_REG_ARM_V* registers.
Signed-off-by: Jean Pihet jean.pihet@linaro.org Cc: Will Deacon will.deacon@arm.com --- arch/arm64/Kconfig | 2 ++ arch/arm64/include/asm/ptrace.h | 1 + arch/arm64/include/uapi/asm/Kbuild | 1 + arch/arm64/include/uapi/asm/perf_regs.h | 40 ++++++++++++++++++++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/perf_regs.c | 44 +++++++++++++++++++++++++++++++++ 6 files changed, 89 insertions(+) create mode 100644 arch/arm64/include/uapi/asm/perf_regs.h create mode 100644 arch/arm64/kernel/perf_regs.c
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index dd4327f..e9899bb 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -37,6 +37,8 @@ config ARM64 select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK select HAVE_PERF_EVENTS + select HAVE_PERF_REGS + select HAVE_PERF_USER_STACK_DUMP select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index 0e7fa49..fbb0020 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -68,6 +68,7 @@
/* Architecturally defined mapping between AArch32 and AArch64 registers */ #define compat_usr(x) regs[(x)] +#define compat_fp regs[11] #define compat_sp regs[13] #define compat_lr regs[14] #define compat_sp_hyp regs[15] diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild index e4b78bd..942376d 100644 --- a/arch/arm64/include/uapi/asm/Kbuild +++ b/arch/arm64/include/uapi/asm/Kbuild @@ -9,6 +9,7 @@ header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h header-y += kvm_para.h +header-y += perf_regs.h header-y += param.h header-y += ptrace.h header-y += setup.h diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h new file mode 100644 index 0000000..172b831 --- /dev/null +++ b/arch/arm64/include/uapi/asm/perf_regs.h @@ -0,0 +1,40 @@ +#ifndef _ASM_ARM64_PERF_REGS_H +#define _ASM_ARM64_PERF_REGS_H + +enum perf_event_arm_regs { + PERF_REG_ARM64_X0, + PERF_REG_ARM64_X1, + PERF_REG_ARM64_X2, + PERF_REG_ARM64_X3, + PERF_REG_ARM64_X4, + PERF_REG_ARM64_X5, + PERF_REG_ARM64_X6, + PERF_REG_ARM64_X7, + PERF_REG_ARM64_X8, + PERF_REG_ARM64_X9, + PERF_REG_ARM64_X10, + PERF_REG_ARM64_X11, + PERF_REG_ARM64_X12, + PERF_REG_ARM64_X13, + PERF_REG_ARM64_X14, + PERF_REG_ARM64_X15, + PERF_REG_ARM64_X16, + PERF_REG_ARM64_X17, + PERF_REG_ARM64_X18, + PERF_REG_ARM64_X19, + PERF_REG_ARM64_X20, + PERF_REG_ARM64_X21, + PERF_REG_ARM64_X22, + PERF_REG_ARM64_X23, + PERF_REG_ARM64_X24, + PERF_REG_ARM64_X25, + PERF_REG_ARM64_X26, + PERF_REG_ARM64_X27, + PERF_REG_ARM64_X28, + PERF_REG_ARM64_X29, + PERF_REG_ARM64_LR, + PERF_REG_ARM64_SP, + PERF_REG_ARM64_PC, + PERF_REG_ARM64_MAX, +}; +#endif /* _ASM_ARM64_PERF_REGS_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 2d4554b..9a5d592 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,6 +15,7 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o +arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c new file mode 100644 index 0000000..f2d6f0a --- /dev/null +++ b/arch/arm64/kernel/perf_regs.c @@ -0,0 +1,44 @@ +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/bug.h> +#include <asm/perf_regs.h> +#include <asm/ptrace.h> + +u64 perf_reg_value(struct pt_regs *regs, int idx) +{ + if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_MAX)) + return 0; + + /* + * Compat (i.e. 32 bit) mode: + * - PC has been set in the pt_regs struct in kernel_entry, + * - Handle SP and LR here. + */ + if (compat_user_mode(regs)) { + if ((u32)idx == PERF_REG_ARM64_SP) + return regs->compat_sp; + if ((u32)idx == PERF_REG_ARM64_LR) + return regs->compat_lr; + } + + return regs->regs[idx]; +} + +#define REG_RESERVED (~((1ULL << PERF_REG_ARM64_MAX) - 1)) + +int perf_reg_validate(u64 mask) +{ + if (!mask || mask & REG_RESERVED) + return -EINVAL; + + return 0; +} + +u64 perf_reg_abi(struct task_struct *task) +{ + if (is_compat_thread(task_thread_info(task))) + return PERF_SAMPLE_REGS_ABI_32; + else + return PERF_SAMPLE_REGS_ABI_64; +}
From: Jean Pihet jean.pihet@newoldbits.com
This patch hooks in the perf_regs and libunwind code for ARM64. The tools/perf/arch/arm64 is created; it contains the arch specific code for DWARF unwinding.
Signed-off-by: Jean Pihet jean.pihet@linaro.org Cc: Will Deacon will.deacon@arm.com --- tools/perf/arch/arm64/Makefile | 7 +++ tools/perf/arch/arm64/include/perf_regs.h | 88 +++++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/dwarf-regs.c | 80 ++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/unwind.c | 82 ++++++++++++++++++++++++++++ tools/perf/config/Makefile | 8 ++- 5 files changed, 264 insertions(+), 1 deletion(-) create mode 100644 tools/perf/arch/arm64/Makefile create mode 100644 tools/perf/arch/arm64/include/perf_regs.h create mode 100644 tools/perf/arch/arm64/util/dwarf-regs.c create mode 100644 tools/perf/arch/arm64/util/unwind.c
diff --git a/tools/perf/arch/arm64/Makefile b/tools/perf/arch/arm64/Makefile new file mode 100644 index 0000000..fe9b61e --- /dev/null +++ b/tools/perf/arch/arm64/Makefile @@ -0,0 +1,7 @@ +ifndef NO_DWARF +PERF_HAVE_DWARF_REGS := 1 +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o +endif +ifndef NO_LIBUNWIND +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/unwind.o +endif diff --git a/tools/perf/arch/arm64/include/perf_regs.h b/tools/perf/arch/arm64/include/perf_regs.h new file mode 100644 index 0000000..2359546 --- /dev/null +++ b/tools/perf/arch/arm64/include/perf_regs.h @@ -0,0 +1,88 @@ +#ifndef ARCH_PERF_REGS_H +#define ARCH_PERF_REGS_H + +#include <stdlib.h> +#include "../../util/types.h" +#include <asm/perf_regs.h> + +#define PERF_REGS_MASK ((1ULL << PERF_REG_ARM64_MAX) - 1) +#define PERF_REG_IP PERF_REG_ARM64_PC +#define PERF_REG_SP PERF_REG_ARM64_SP + +static inline const char *perf_reg_name(int id) +{ + switch (id) { + case PERF_REG_ARM64_X0: + return "x0"; + case PERF_REG_ARM64_X1: + return "x1"; + case PERF_REG_ARM64_X2: + return "x2"; + case PERF_REG_ARM64_X3: + return "x3"; + case PERF_REG_ARM64_X4: + return "x4"; + case PERF_REG_ARM64_X5: + return "x5"; + case PERF_REG_ARM64_X6: + return "x6"; + case PERF_REG_ARM64_X7: + return "x7"; + case PERF_REG_ARM64_X8: + return "x8"; + case PERF_REG_ARM64_X9: + return "x9"; + case PERF_REG_ARM64_X10: + return "x10"; + case PERF_REG_ARM64_X11: + return "x11"; + case PERF_REG_ARM64_X12: + return "x12"; + case PERF_REG_ARM64_X13: + return "x13"; + case PERF_REG_ARM64_X14: + return "x14"; + case PERF_REG_ARM64_X15: + return "x15"; + case PERF_REG_ARM64_X16: + return "x16"; + case PERF_REG_ARM64_X17: + return "x17"; + case PERF_REG_ARM64_X18: + return "x18"; + case PERF_REG_ARM64_X19: + return "x19"; + case PERF_REG_ARM64_X20: + return "x20"; + case PERF_REG_ARM64_X21: + return "x21"; + case PERF_REG_ARM64_X22: + return "x22"; + case PERF_REG_ARM64_X23: + return "x23"; + case PERF_REG_ARM64_X24: + return "x24"; + case PERF_REG_ARM64_X25: + return "x25"; + case PERF_REG_ARM64_X26: + return "x26"; + case PERF_REG_ARM64_X27: + return "x27"; + case PERF_REG_ARM64_X28: + return "x28"; + case PERF_REG_ARM64_X29: + return "x29"; + case PERF_REG_ARM64_SP: + return "sp"; + case PERF_REG_ARM64_LR: + return "lr"; + case PERF_REG_ARM64_PC: + return "pc"; + default: + return NULL; + } + + return NULL; +} + +#endif /* ARCH_PERF_REGS_H */ diff --git a/tools/perf/arch/arm64/util/dwarf-regs.c b/tools/perf/arch/arm64/util/dwarf-regs.c new file mode 100644 index 0000000..d49efeb --- /dev/null +++ b/tools/perf/arch/arm64/util/dwarf-regs.c @@ -0,0 +1,80 @@ +/* + * Mapping of DWARF debug register numbers into register names. + * + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <stddef.h> +#include <dwarf-regs.h> + +struct pt_regs_dwarfnum { + const char *name; + unsigned int dwarfnum; +}; + +#define STR(s) #s +#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num} +#define GPR_DWARFNUM_NAME(num) \ + {.name = STR(%x##num), .dwarfnum = num} +#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0} + +/* + * Reference: + * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0057b/IHI0057B_aadwarf64... + */ +static const struct pt_regs_dwarfnum regdwarfnum_table[] = { + GPR_DWARFNUM_NAME(0), + GPR_DWARFNUM_NAME(1), + GPR_DWARFNUM_NAME(2), + GPR_DWARFNUM_NAME(3), + GPR_DWARFNUM_NAME(4), + GPR_DWARFNUM_NAME(5), + GPR_DWARFNUM_NAME(6), + GPR_DWARFNUM_NAME(7), + GPR_DWARFNUM_NAME(8), + GPR_DWARFNUM_NAME(9), + GPR_DWARFNUM_NAME(10), + GPR_DWARFNUM_NAME(11), + GPR_DWARFNUM_NAME(12), + GPR_DWARFNUM_NAME(13), + GPR_DWARFNUM_NAME(14), + GPR_DWARFNUM_NAME(15), + GPR_DWARFNUM_NAME(16), + GPR_DWARFNUM_NAME(17), + GPR_DWARFNUM_NAME(18), + GPR_DWARFNUM_NAME(19), + GPR_DWARFNUM_NAME(20), + GPR_DWARFNUM_NAME(21), + GPR_DWARFNUM_NAME(22), + GPR_DWARFNUM_NAME(23), + GPR_DWARFNUM_NAME(24), + GPR_DWARFNUM_NAME(25), + GPR_DWARFNUM_NAME(26), + GPR_DWARFNUM_NAME(27), + GPR_DWARFNUM_NAME(28), + GPR_DWARFNUM_NAME(29), + REG_DWARFNUM_NAME("%lr", 30), + REG_DWARFNUM_NAME("%sp", 31), + REG_DWARFNUM_END, +}; + +/** + * get_arch_regstr() - lookup register name from it's DWARF register number + * @n: the DWARF register number + * + * get_arch_regstr() returns the name of the register in struct + * regdwarfnum_table from it's DWARF register number. If the register is not + * found in the table, this returns NULL; + */ +const char *get_arch_regstr(unsigned int n) +{ + const struct pt_regs_dwarfnum *roff; + for (roff = regdwarfnum_table; roff->name != NULL; roff++) + if (roff->dwarfnum == n) + return roff->name; + return NULL; +} diff --git a/tools/perf/arch/arm64/util/unwind.c b/tools/perf/arch/arm64/util/unwind.c new file mode 100644 index 0000000..8d37a4c --- /dev/null +++ b/tools/perf/arch/arm64/util/unwind.c @@ -0,0 +1,82 @@ + +#include <errno.h> +#include <libunwind.h> +#include "perf_regs.h" +#include "../../util/unwind.h" + +int unwind__arch_reg_id(int regnum) +{ + switch (regnum) { + case UNW_AARCH64_X0: + return PERF_REG_ARM64_X0; + case UNW_AARCH64_X1: + return PERF_REG_ARM64_X1; + case UNW_AARCH64_X2: + return PERF_REG_ARM64_X2; + case UNW_AARCH64_X3: + return PERF_REG_ARM64_X3; + case UNW_AARCH64_X4: + return PERF_REG_ARM64_X4; + case UNW_AARCH64_X5: + return PERF_REG_ARM64_X5; + case UNW_AARCH64_X6: + return PERF_REG_ARM64_X6; + case UNW_AARCH64_X7: + return PERF_REG_ARM64_X7; + case UNW_AARCH64_X8: + return PERF_REG_ARM64_X8; + case UNW_AARCH64_X9: + return PERF_REG_ARM64_X9; + case UNW_AARCH64_X10: + return PERF_REG_ARM64_X10; + case UNW_AARCH64_X11: + return PERF_REG_ARM64_X11; + case UNW_AARCH64_X12: + return PERF_REG_ARM64_X12; + case UNW_AARCH64_X13: + return PERF_REG_ARM64_X13; + case UNW_AARCH64_X14: + return PERF_REG_ARM64_X14; + case UNW_AARCH64_X15: + return PERF_REG_ARM64_X15; + case UNW_AARCH64_X16: + return PERF_REG_ARM64_X16; + case UNW_AARCH64_X17: + return PERF_REG_ARM64_X17; + case UNW_AARCH64_X18: + return PERF_REG_ARM64_X18; + case UNW_AARCH64_X19: + return PERF_REG_ARM64_X19; + case UNW_AARCH64_X20: + return PERF_REG_ARM64_X20; + case UNW_AARCH64_X21: + return PERF_REG_ARM64_X21; + case UNW_AARCH64_X22: + return PERF_REG_ARM64_X22; + case UNW_AARCH64_X23: + return PERF_REG_ARM64_X23; + case UNW_AARCH64_X24: + return PERF_REG_ARM64_X24; + case UNW_AARCH64_X25: + return PERF_REG_ARM64_X25; + case UNW_AARCH64_X26: + return PERF_REG_ARM64_X26; + case UNW_AARCH64_X27: + return PERF_REG_ARM64_X27; + case UNW_AARCH64_X28: + return PERF_REG_ARM64_X28; + case UNW_AARCH64_X29: + return PERF_REG_ARM64_X29; + case UNW_AARCH64_X30: + return PERF_REG_ARM64_LR; + case UNW_AARCH64_SP: + return PERF_REG_ARM64_SP; + case UNW_AARCH64_PC: + return PERF_REG_ARM64_PC; + default: + pr_err("unwind: invalid reg id %d\n", regnum); + return -EINVAL; + } + + return -EINVAL; +} diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile index d604e50..2fdcd68 100644 --- a/tools/perf/config/Makefile +++ b/tools/perf/config/Makefile @@ -29,11 +29,17 @@ ifeq ($(ARCH),x86) endif NO_PERF_REGS := 0 endif + ifeq ($(ARCH),arm) NO_PERF_REGS := 0 LIBUNWIND_LIBS = -lunwind -lunwind-arm endif
+ifeq ($(ARCH),arm64) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 +endif + ifeq ($(LIBUNWIND_LIBS),) NO_LIBUNWIND := 1 else @@ -327,7 +333,7 @@ ifndef NO_LIBUNWIND msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1); NO_LIBUNWIND := 1 else - ifeq ($(ARCH),arm) + ifeq ($(ARCH),$(filter $(ARCH),arm arm64)) $(call feature_check,libunwind-debug-frame) ifneq ($(feature-libunwind-debug-frame), 1) msg := $(warning No debug_frame support found in libunwind);
When profiling a 32-bit application, user space callchain unwinding using the frame pointer is performed in compat mode. The code is taken over from the AARCH32 code and adapted to work on AARCH64.
Signed-off-by: Jean Pihet jean.pihet@linaro.org --- arch/arm64/kernel/perf_event.c | 75 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 5b1cd79..e868c72 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -1348,8 +1348,8 @@ early_initcall(init_hw_perf_events); * Callchain handling code. */ struct frame_tail { - struct frame_tail __user *fp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long lr; } __attribute__((packed));
/* @@ -1386,22 +1386,80 @@ user_backtrace(struct frame_tail __user *tail, return buftail.fp; }
+/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct compat_frame_tail *)(xxx->fp)-1 + * + * This code has been adapted from the ARM OProfile support. + */ +struct compat_frame_tail { + compat_uptr_t fp; /* a (struct compat_frame_tail *) in compat mode */ + u32 sp; + u32 lr; +} __attribute__((packed)); + +static struct compat_frame_tail __user * +compat_user_backtrace(struct compat_frame_tail __user *tail, + struct perf_callchain_entry *entry) +{ + struct compat_frame_tail buftail; + unsigned long err; + + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) + return NULL; + + perf_callchain_store(entry, buftail.lr); + + /* + * Frame pointers should strictly progress back up the stack + * (towards higher addresses). + */ + if (tail + 1 >= (struct compat_frame_tail __user *) + compat_ptr(buftail.fp)) + return NULL; + + return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1; +} + void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail __user *tail; - if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) { /* We don't support guest os callchain now */ return; }
perf_callchain_store(entry, regs->pc); - tail = (struct frame_tail __user *)regs->regs[29];
- while (entry->nr < PERF_MAX_STACK_DEPTH && - tail && !((unsigned long)tail & 0xf)) - tail = user_backtrace(tail, entry); + if (!compat_user_mode(regs)) { + /* AARCH64 mode */ + struct frame_tail __user *tail; + + tail = (struct frame_tail __user *)regs->regs[29]; + + while (entry->nr < PERF_MAX_STACK_DEPTH && + tail && !((unsigned long)tail & 0xf)) + tail = user_backtrace(tail, entry); + } else { + /* AARCH32 compat mode */ + struct compat_frame_tail __user *tail; + + tail = (struct compat_frame_tail __user *)regs->compat_fp - 1; + + while ((entry->nr < PERF_MAX_STACK_DEPTH) && + tail && !((unsigned long)tail & 0x3)) + tail = compat_user_backtrace(tail, entry); + } }
/* @@ -1429,6 +1487,7 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry, frame.fp = regs->regs[29]; frame.sp = regs->sp; frame.pc = regs->pc; + walk_stackframe(&frame, callchain_trace, entry); }
Add support for unwinding using the dwarf information in compat mode. Using the correct user stack pointer allows perf to record the frames correctly in the native and compat modes.
Note that although the dwarf frame unwinding works ok using libunwind in native mode (on ARMv7 & ARMv8), some changes are required to the libunwind code for the compat mode. Those changes are posted separately on the libunwind mailing list.
Tested on ARMv8 platform with v8 and compat v7 binaries, the latter are statically built.
Signed-off-by: Jean Pihet jean.pihet@linaro.org --- arch/arm64/include/asm/compat.h | 2 +- arch/arm64/include/asm/ptrace.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index fda2704..e71f81f 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -228,7 +228,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr) return (u32)(unsigned long)uptr; }
-#define compat_user_stack_pointer() (current_pt_regs()->compat_sp) +#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
static inline void __user *arch_compat_alloc_user_space(long len) { diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index fbb0020..86d5b54 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -133,7 +133,7 @@ struct pt_regs { (!((regs)->pstate & PSR_F_BIT))
#define user_stack_pointer(regs) \ - ((regs)->sp) + (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp)
/* * Are the current registers suitable for user mode? (used to maintain
Hi Jean,
On Wed, Jan 22, 2014 at 02:11:15PM +0000, Jean Pihet wrote:
Add AARCH64 specific support. This includes the following:
- AARCH64 perf registers definition and hooks,
- compat mode registers use, i.e. profiling a 32-bit binary on a 64-bit system,
- unwinding using the dwarf information from the .debug_frame section of the ELF binary,
- unwinding using the frame pointer information; in 64-bit and compat modes.
Note: support for unwinding using the dwarf information in compat mode requires some changes to the libunwind code. Those changes have been submitted on the libunwind ML and are in discussion.
Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been tested on ARMv8 using statically built 32-bit binaries.
This is look alright to me now, but there are still two blockers:
(1) Getting the libunwind code merged (2) Splitting this into an arch/arm64 series and a tools/perf series, so that acme can merge the latter independently (and avoid the mess we had last time).
Anyway, for the series:
Acked-by: Will Deacon will.deacon@arm.com
Will
Hi Will, Arnaldo,
On 24 January 2014 17:35, Will Deacon will.deacon@arm.com wrote:
Hi Jean,
On Wed, Jan 22, 2014 at 02:11:15PM +0000, Jean Pihet wrote:
Add AARCH64 specific support. This includes the following:
- AARCH64 perf registers definition and hooks,
- compat mode registers use, i.e. profiling a 32-bit binary on a 64-bit system,
- unwinding using the dwarf information from the .debug_frame section of the ELF binary,
- unwinding using the frame pointer information; in 64-bit and compat modes.
Note: support for unwinding using the dwarf information in compat mode requires some changes to the libunwind code. Those changes have been submitted on the libunwind ML and are in discussion.
Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been tested on ARMv8 using statically built 32-bit binaries.
This is look alright to me now, but there are still two blockers:
(1) Getting the libunwind code merged
This one is independent of the kernel changes. The libunwind stuff is under disuccsion atm, cf. libunwind ML.
(2) Splitting this into an arch/arm64 series and a tools/perf series, so that acme can merge the latter independently (and avoid the mess we had last time).
Split into: - the tools/perf change: '[PATCH] perf: ARM64: wire up perf_regs and unwind support' and - the arch/arm64 changes: '[PATCH v6 0/3] perf: AARCH64 arch support'.
Anyway, for the series:
Acked-by: Will Deacon will.deacon@arm.com
Thanks! I have added your Acked-By in the series.
Will
Jean
Kodiak Furr liked your message with Boxer. On February 3, 2014 at 12:22:42 PM CST, Jean Pihet wrote:Hi Will, Arnaldo,On 24 January 2014 17:35, Will Deacon wrote:> Hi Jean,>> On Wed, Jan 22, 2014 at 02:11:15PM +0000, Jean Pihet wrote:>> Add AARCH64 specific support. This includes the following:>> - AARCH64 perf registers definition and hooks,>> - compat mode registers use, i.e. profiling a 32-bit binary on>> a 64-bit system,>> - unwinding using the dwarf information from the .debug_frame>> section of the ELF binary,>> - unwinding using the frame pointer information; in 64-bit and>> compat modes.>>>> Note: support for unwinding using the dwarf information in compat>> mode requires some changes to the libunwind code. Those changes>> have been submitted on the libunwind ML and are in discussion.>>>> Tested on ARMv7, ARMv8 and x86_64 platforms. The compat mode has been>> tested on ARMv8 using statically built 32-bit binaries.>> This is look alright to me now, but there are still two blockers:>> (1) Getting the libunwind code mergedThis one is independent of the kernel changes. The libunwind stuff isunder disuccsion atm, cf. libunwind ML.> (2) Splitting this into an arch/arm64 series and a tools/perf series, so> that acme can merge the latter independently (and avoid the mess we had> last time).Split into:- the tools/perf change: '[PATCH] perf: ARM64: wire up perf_regs andunwind support'and- the arch/arm64 changes: '[PATCH v6 0/3] perf: AARCH64 arch support'.>> Anyway, for the series:>> Acked-by: Will Deacon Thanks! I have added your Acked-By in the series.>> WillJean--To unsubscribe from this list: send the line "unsubscribe linux-kernel" inthe body of a message to majordomo@vger.kernel.orgMore majordomo info at http://vger.kernel.org/majordomo-info.htmlPlease read the FAQ at http://www.tux.org/lkml/
linaro-kernel@lists.linaro.org
-
Jean Pihet -
Kodiak Furr -
Will Deacon