queue boot: 32 pass, 1 fail (v3.12.10-33-g6c2bf9d) - linaro-kernel

7 Feb 2014


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.10-33-g6c2bf9d
Failed boot tests (console logs at the end)
===========================================
          armada-370-mirabox:     FAIL:    mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 25.1 sec
             omap3-beagle-xm     PASS:    0 min 56.9 sec
                 omap4-panda     PASS:    1 min  3.6 sec
                  omap3-tobi     PASS:    0 min 22.1 sec
                 am335x-bone     PASS:    0 min 26.9 sec
              omap4-panda-es     PASS:    1 min  3.9 sec
multi_lpae_defconfig
--------------------
       sun7i-a20-cubieboard2     PASS:    0 min 13.8 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.9 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.6 sec
             imx6q-wandboard     PASS:    0 min 16.3 sec
bcm_defconfig
-------------
                 bcm28155-ap     PASS:    0 min 53.6 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    0 min 28.5 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 28.5 sec
              tegra30-beaver     PASS:    0 min 14.2 sec
            am335x-boneblack     PASS:    0 min 32.4 sec
             omap3-beagle-xm     PASS:    1 min  0.5 sec
       sun7i-a20-cubieboard2     PASS:    0 min 13.6 sec
          armada-370-mirabox     PASS:    0 min 20.5 sec
                 omap4-panda     PASS:    1 min  8.5 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.6 sec
        sun4i-a10-cubieboard     PASS:    0 min 13.6 sec
                 bcm28155-ap     PASS:    1 min  9.7 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 17.2 sec
                  omap3-tobi     PASS:    0 min 20.7 sec
                 am335x-bone     PASS:    0 min 33.7 sec
             imx6q-wandboard     PASS:    0 min 16.2 sec
              omap4-panda-es     PASS:    1 min  2.1 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 17.3 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 36.2 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.3 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 20.8 sec
          armada-370-mirabox     FAIL:    0 min 27.7 sec
Console logs for failures
=========================
mvebu_defconfig
---------------
armada-370-mirabox: FAIL: last 80 lines of boot log:
    ----------------------------------------------------
phy16= 72 
phy16= 72 
MMC:   MRVL_MMC: 0
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  3
  0 
Marvell>> 
Marvell>> version
version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ
Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk
setenv bootargs console=ttyS0,115200 debug earlyprintk
Marvell>setenv initrd_high 0xffffffff
...
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
Marvell>if test -n ${preboot}; then run preboot; fi
...
if test -n ${preboot}; then run preboot; fi
Marvell>setenv autoload no; setenv autoboot no
...
setenv autoload no; setenv autoboot no
Marvell>dhcp
...
dhcp
phyaddr= 0
BOOTP broadcast 1
DHCP client bound to address 192.168.1.183
Marvell>setenv serverip 192.168.1.2
...
setenv serverip 192.168.1.2
Marvell>> if test -n ${netargs}; then run netargs; fi
if test -n ${netargs}; then run netargs; fi
Marvell>>tftp 0x02000000 192.168.1.2:tmp/mirabox-dHs2fx/tmpqpFREy-uImage
 tftp 0x02000000 192.168.1.2:tmp/mirabox-dHs2fx/tmpqpFREy-uImage
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'tmp/mirabox-dHs2fx/tmpqpFREy-uImage'.
Load address: 0x2000000
Loading: *#################################################################
     #################################################################
     ###################################################
done
Bytes transferred = 2653565 (287d7d hex)
Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.183
Filename 'buildroot.cpio.gz.uboot'.
Load address: 0x3000000
Loading: *############################################
done
Bytes transferred = 639808 (9c340 hex)
Marvell>printenv bootargs
...
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk
Marvell>> bootm 0x02000000 0x03000000 
bootm 0x02000000 0x03000000 
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux
   Created:      2014-02-07  18:12:39 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2653501 Bytes =  2.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
   Image Name:   
   Created:      2013-09-07   5:02:12 UTC
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    639744 Bytes = 624.8 kB
   Load Address: 81000000
   Entry Point:  81000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 27.72 seconds.
# PYBOOT: Result: FAIL