Automated DT boot report for various ARM defconfigs.

Tree/Branch: arm-soc Git describe: v3.13-rc5-1047-g5e59dd4 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig

Full Report ===========

omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 1 min 1.7 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 8.6 sec omap4-panda-es PASS: 1 min 11.7 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec

tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec

imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.7 sec

sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec

mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec

exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 59.8 sec

multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.0 sec tegra30-beaver PASS: 0 min 19.6 sec am335x-boneblack FAIL: 0 min 30.6 sec omap3-beagle-xm FAIL: 0 min 48.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.5 sec omap4-panda FAIL: 1 min 47.7 sec omap4-panda-es FAIL: 1 min 45.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone FAIL: 0 min 29.5 sec imx6q-wandboard PASS: 0 min 16.7 sec omap3-tobi,3730storm FAIL: 0 min 28.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo FAIL: 0 min 30.2 sec

u8500_defconfig --------------- ste-snowball PASS: 0 min 27.6 sec

sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

Console logs for failures =========================

multi_v7_defconfig ------------------

am335x-boneblack: FAIL: last 24 lines of boot log: --------------------------------------------------

done Bytes transferred = 17911 (45f7 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.176:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.63 seconds. # PYBOOT: Result: FAIL

omap3-beagle-xm: FAIL: last 24 lines of boot log: -------------------------------------------------

done Bytes transferred = 15577 (3cd9 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62cd8 ... OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 48.57 seconds. # PYBOOT: Result: FAIL

omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------

[ 2.017456] reg-fixed-voltage wl12xx_vmmc.9: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 2.030120] platform wl12xx_vmmc.9: Driver reg-fixed-voltage requests probe deferral [ 2.038299] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 2.050354] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 2.057952] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 2.069488] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 2.077117] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 2.077117] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 2.095886] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 2.107788] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 2.115020] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.123382] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.131042] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.136932] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.144256] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.151580] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.159088] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 2.171386] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 2.293243] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.427032] smsc95xx v1.0.4 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.69 seconds. # PYBOOT: Result: FAIL

omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------

[ 1.529693] Registering SWP/SWPB emulation handler [ 1.535583] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.548370] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.556762] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.568542] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.576049] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.587585] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.595092] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.606597] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.613830] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.625640] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.633483] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.641082] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.648712] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.648803] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.661895] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.669250] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.676788] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.688873] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.696655] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.705322] spear_cpufreq: Invalid cpufreq_tbl~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.55 seconds. # PYBOOT: Result: FAIL

am335x-bone: FAIL: last 24 lines of boot log: ---------------------------------------------

done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.47 seconds. # PYBOOT: Result: FAIL

omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------

smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-8PTV3F/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *## 2.1 MiB/s done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffffb56 ... OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.19 seconds. # PYBOOT: Result: FAIL

omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------

done Bytes transferred = 15191 (3b57 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff62b56 ... OK

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.20 seconds. # PYBOOT: Result: FAIL