New subject: [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver

27 Jun 2013

Separate the W90X900(W90P910) on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before W90X900(W90P910)
can be booted with a multi-platform kernel
and an ehci driver that only works on one of them.
With the infrastructure added by Alan Stern in patch 3e0232039
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the w90X900 bus glue.
Signed-off-by: Manjunath Goudar manjunath.goudar@linaro.org
Acked-by: Arnd Bergmann arnd@arndb.de
Cc: Greg KH greg@kroah.com
Cc: Alan Stern stern@rowland.harvard.edu
Cc: Wan ZongShun mcuos.com@gmail.com
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/usb/host/Kconfig        |    2 +-
 drivers/usb/host/Makefile       |    1 +
 drivers/usb/host/ehci-hcd.c     |    5 ---
 drivers/usb/host/ehci-w90x900.c |   85 ++++++++++++++++-----------------------
 4 files changed, 37 insertions(+), 56 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a0a63df..f35f71e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -244,7 +244,7 @@ config USB_EHCI_MV
      SoCs, see USB_EHCI_HCD_ORION for those.
config USB_W90X900_EHCI
-	bool "W90X900(W90P910) EHCI support"
+	tristate "W90X900(W90P910) EHCI support"
    depends on ARCH_W90X900
    ---help---
    	Enables support for the W90X900 USB controller
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 7664db8..28adb3f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_MSM)	+= ehci-msm.o
 obj-$(CONFIG_USB_EHCI_TEGRA)	+= ehci-tegra.o
 obj-$(CONFIG_USB_EHCI_MV)       += ehci-mv.o
+obj-$(CONFIG_USB_W90X900_EHCI)	+= ehci-w90x900.o
obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5717dcd..4a5644e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
 #define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
 #endif
-#ifdef CONFIG_USB_W90X900_EHCI
-#include "ehci-w90x900.c"
-#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
-#endif
-
 #ifdef CONFIG_USB_OCTEON_EHCI
 #include "ehci-octeon.c"
 #define PLATFORM_DRIVER		ehci_octeon_driver
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index 59e0e24..d9ecd79 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -11,13 +11,28 @@
  *
  */
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
+#include "ehci.h"
+
 /* enable phy0 and phy1 for w90p910 */
 #define	ENPHY		(0x01<<8)
 #define PHY0_CTR	(0xA4)
 #define PHY1_CTR	(0xA8)
+#define DRIVER_DESC "w90p910 usb ehci driver!"
+
+static const char hcd_name[] = "ehci-w90x900 ";
+
+static struct hc_driver __read_mostly ehci_w90x900_hc_driver;
+
 static int usb_w90x900_probe(const struct hc_driver *driver,
    	      struct platform_device *pdev)
 {
@@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
    usb_put_hcd(hcd);
 }
-static const struct hc_driver ehci_w90x900_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Nuvoton w90x900 EHCI Host Controller",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_USB2|HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset = ehci_setup,
-	.start = ehci_run,
-
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
-	.endpoint_reset = ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-#endif
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
 static int ehci_w90x900_probe(struct platform_device *pdev)
 {
    if (usb_disabled())
@@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = {
    },
 };
+static int __init ehci_w90X900_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_w90x900_hc_driver, NULL);
+	return platform_driver_register(&ehci_hcd_w90x900_driver);
+}
+module_init(ehci_w90X900_init);
+
+static void __exit ehci_w90X900_cleanup(void)
+{
+	platform_driver_unregister(&ehci_hcd_w90x900_driver);
+}
+module_exit(ehci_w90X900_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Wan ZongShun mcuos.com@gmail.com");
-MODULE_DESCRIPTION("w90p910 usb ehci driver!");
-MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:w90p910-ehci");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5



    

[PATCH] USB: EHCI: make ehci-w90X900 a separate driver

+MODULE_LICENSE("GPL v2");