This is what I do: step 1: download image http://releases.linaro.org/13.10/ubuntu/panda/panda-raring_developer_2013102... and flash it to my SD card. test it on pandaboard, run well.
step 2: setup toolschain with http://releases.linaro.org/13.04/components/toolchain/binaries/gcc-linaro-ar...
step 3: download kernel source code from http://releases.linaro.org/13.10/components/kernel/linux-linaro/linux-linaro..., uncompress to dir kernelSrc cp SdCard/rootfs/boot/config-3.12.0-1-linaro-omap kernelSrc/.config
step 4: cd kernelSrc LOADADDR=0x80008000 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage -j8 copy arch/arm/boot/uImage to SdCard/fat32partion/ replace the offical uImage
step 5: test the SD card again, run failure. the console message stop on Starting kernel ...
Could you help me, How to rebuild the ubuntu kernel correctly?
CC to Naresh and Vishal.
On 11/18/2013 10:27 AM, 林雅 wrote:
This is what I do: step 1: download image http://releases.linaro.org/13.10/ubuntu/panda/panda-raring_developer_2013102... and flash it to my SD card. test it on pandaboard, run well.
step 2: setup toolschain with http://releases.linaro.org/13.04/components/toolchain/binaries/gcc-linaro-ar...
step 3: download kernel source code from http://releases.linaro.org/13.10/components/kernel/linux-linaro/linux-linaro..., uncompress to dir kernelSrc cp SdCard/rootfs/boot/config-3.12.0-1-linaro-omap kernelSrc/.config
step 4: cd kernelSrc LOADADDR=0x80008000 make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- uImage -j8 copy arch/arm/boot/uImage to SdCard/fat32partion/ replace the offical uImage
step 5: test the SD card again, run failure. the console message stop on Starting kernel ...
Could you help me, How to rebuild the ubuntu kernel correctly?
linaro-kernel mailing list linaro-kernel@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-kernel
linaro-kernel@lists.linaro.org
-
Alex Shi -
林雅