As part of the migration a couple of uart definitions have been copied from of the platform specific header files.

Note that, in order to keep oldconfig working nicely we must defer the removal of arch/arm/mach-ks8695/include/mach/debug-macro.S until DEBUG_LL_UART_NONE has been removed.

Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Cc: Russell King linux@arm.linux.org.uk Cc: Greg Ungerer gerg@uclinux.org Cc: Arnd Bergmann arnd.bergmann@linaro.org ---

Notes: This is a contribution towards the removal of DEBUG_LL_UART_NONE, see http://thread.gmane.org/gmane.linux.kernel/1712068/focus=1746065 for details.

arch/arm/Kconfig.debug | 8 ++++++++ arch/arm/include/debug/ks8695.S | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm/include/debug/ks8695.S

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8f90595..6f9664a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -340,6 +340,13 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices.

+ config DEBUG_KS8695_UART + bool "KS8695 Debug UART" + depends on ARCH_KS8695 + help + Say Y here if you want kernel low-level debugging support + on KS8695. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -1006,6 +1013,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART + default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART diff --git a/arch/arm/include/debug/ks8695.S b/arch/arm/include/debug/ks8695.S new file mode 100644 index 0000000..961da1f --- /dev/null +++ b/arch/arm/include/debug/ks8695.S @@ -0,0 +1,40 @@ +/* + * arch/arm/include/debug/ks8695.S + * + * Copyright (C) 2006 Ben Dooks ben@simtec.co.uk + * Copyright (C) 2006 Simtec Electronics + * + * KS8695 - Debug macros + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define KS8695_UART_PA 0x03ffe000 +#define KS8695_UART_VA 0xf00fe000 +#define KS8695_URTH (0x04) +#define KS8695_URLS (0x14) +#define URLS_URTE (1 << 6) +#define URLS_URTHRE (1 << 5) + + .macro addruart, rp, rv, tmp + ldr \rp, =KS8695_UART_PA @ physical base address + ldr \rv, =KS8695_UART_VA @ virtual base address + .endm + + .macro senduart, rd, rx + str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register + .endm + + .macro busyuart, rd, rx +1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register + tst \rd, #URLS_URTE @ Holding & Shift registers empty? + beq 1001b + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register + tst \rd, #URLS_URTHRE @ Holding Register empty? + beq 1001b + .endm