Currently prototype of cpufreq_drivers target routines is:

int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation);

And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after it.

So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables.

This patch implements the new light weight prototype for target_index() routine. It looks like this:

int target_index(struct cpufreq_policy *policy, unsigned int index);

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.

This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- Documentation/cpu-freq/cpu-drivers.txt | 27 ++++++++++------ Documentation/cpu-freq/governors.txt | 4 +-- drivers/cpufreq/cpufreq.c | 57 +++++++++++++++++++++++++++------- include/linux/cpufreq.h | 4 ++- 4 files changed, 69 insertions(+), 23 deletions(-)

diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 40282e6..8b1a445 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -23,8 +23,8 @@ Contents: 1.1 Initialization 1.2 Per-CPU Initialization 1.3 verify -1.4 target or setpolicy? -1.5 target +1.4 target/target_index or setpolicy? +1.5 target/target_index 1.6 setpolicy 2. Frequency Table Helpers

@@ -56,7 +56,8 @@ cpufreq_driver.init - A pointer to the per-CPU initialization cpufreq_driver.verify - A pointer to a "verification" function.

cpufreq_driver.setpolicy _or_ -cpufreq_driver.target - See below on the differences. +cpufreq_driver.target/ +target_index - See below on the differences.

And optionally

@@ -66,7 +67,7 @@ cpufreq_driver.resume - A pointer to a per-CPU resume function which is called with interrupts disabled and _before_ the pre-suspend frequency and/or policy is restored by a call to - ->target or ->setpolicy. + ->target/target_index or ->setpolicy.

cpufreq_driver.attr - A pointer to a NULL-terminated list of "struct freq_attr" which allow to @@ -103,8 +104,8 @@ policy->governor must contain the "default policy" for this CPU. A few moments later, cpufreq_driver.verify and either cpufreq_driver.setpolicy or - cpufreq_driver.target is called with - these values. + cpufreq_driver.target/target_index is called + with these values.

For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the frequency table helpers might be helpful. See the section 2 for more information @@ -133,20 +134,28 @@ range) is within policy->min and policy->max. If necessary, increase policy->max first, and only if this is no solution, decrease policy->min.

-1.4 target or setpolicy? +1.4 target/target_index or setpolicy? ----------------------------

Most cpufreq drivers or even most cpu frequency scaling algorithms only allow the CPU to be set to one frequency. For these, you use the -->target call. +->target/target_index call.

Some cpufreq-capable processors switch the frequency between certain limits on their own. These shall use the ->setpolicy call

-1.4. target +1.4. target/target_index -------------

+The target_index call has two arguments: struct cpufreq_policy *policy, +and unsigned int index (into the exposed frequency table). + +The CPUfreq driver must set the new frequency when called here. The +actual frequency must be determined by freq_table[index].frequency. + +Deprecated: +---------- The target call has three arguments: struct cpufreq_policy *policy, unsigned int target_frequency, unsigned int relation.

diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 219970b..77ec215 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -40,7 +40,7 @@ Most cpufreq drivers (in fact, all except one, longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". So -these specific drivers will be transformed to offer a "->target" +these specific drivers will be transformed to offer a "->target/target_index" call instead of the existing "->setpolicy" call. For "longrun", all stays the same, though.

@@ -71,7 +71,7 @@ CPU can be set to switch independently | CPU can only be set / the limits of policy->{min,max} / \ / \ - Using the ->setpolicy call, Using the ->target call, + Using the ->setpolicy call, Using the ->target/target_index call, the limits and the the frequency closest "policy" is set. to target_freq is set. It is assured that it diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3f03dcb..6c9cbb9 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -47,6 +47,11 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif

+static inline bool has_target(void) +{ + return cpufreq_driver->target_index || cpufreq_driver->target; +} + /* * rwsem to guarantee that cpufreq driver module doesn't unload during critical * sections @@ -351,7 +356,7 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, *policy = CPUFREQ_POLICY_POWERSAVE; err = 0; } - } else if (cpufreq_driver->target) { + } else if (has_target()) { struct cpufreq_governor *t;

mutex_lock(&cpufreq_governor_mutex); @@ -509,7 +514,7 @@ static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, ssize_t i = 0; struct cpufreq_governor *t;

- if (!cpufreq_driver->target) { + if (!has_target()) { i += sprintf(buf, "performance powersave"); goto out; } @@ -794,7 +799,7 @@ static int cpufreq_add_dev_interface(struct cpufreq_policy *policy, if (ret) goto err_out_kobj_put; } - if (cpufreq_driver->target) { + if (has_target()) { ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) goto err_out_kobj_put; @@ -843,10 +848,10 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu, struct device *dev, bool frozen) { - int ret = 0, has_target = !!cpufreq_driver->target; + int ret = 0; unsigned long flags;

- if (has_target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); if (ret) { pr_err("%s: Failed to stop governor\n", __func__); @@ -864,7 +869,7 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy,

up_write(&policy->rwsem);

- if (has_target) { + if (has_target()) { if ((ret = __cpufreq_governor(policy, CPUFREQ_GOV_START)) || (ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))) { pr_err("%s: Failed to start governor\n", __func__); @@ -1169,7 +1174,7 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, return -EINVAL; }

- if (cpufreq_driver->target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); if (ret) { pr_err("%s: Failed to stop governor\n", __func__); @@ -1234,7 +1239,7 @@ static int __cpufreq_remove_dev_finish(struct device *dev,

/* If cpu is last user of policy, free policy */ if (cpus == 1) { - if (cpufreq_driver->target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); if (ret) { @@ -1277,7 +1282,7 @@ static int __cpufreq_remove_dev_finish(struct device *dev, if (!frozen) cpufreq_policy_free(policy); } else { - if (cpufreq_driver->target) { + if (has_target()) { if ((ret = __cpufreq_governor(policy, CPUFREQ_GOV_START)) || (ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))) { pr_err("%s: Failed to start governor\n", @@ -1651,12 +1656,41 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n", policy->cpu, target_freq, relation, old_target_freq);

+ /* + * This might look like a redundant call as we are checking it again + * after finding index. But it is left intentionally for cases where + * exactly same freq is called again and so we can save on few function + * calls. + */ if (target_freq == policy->cur) return 0;

if (cpufreq_driver->target) retval = cpufreq_driver->target(policy, target_freq, relation); + else if (cpufreq_driver->target_index) { + struct cpufreq_frequency_table *freq_table; + int index;

+ freq_table = cpufreq_frequency_get_table(policy->cpu); + if (unlikely(!freq_table)) { + pr_err("%s: Unable to find freq_table\n", __func__); + goto out; + } + + retval = cpufreq_frequency_table_target(policy, freq_table, + target_freq, relation, &index); + if (unlikely(retval)) { + pr_err("%s: Unable to find matching freq\n", __func__); + goto out; + } + + if (freq_table[index].frequency == policy->cur) + retval = 0; + else + retval = cpufreq_driver->target_index(policy, index); + } + +out: return retval; } EXPORT_SYMBOL_GPL(__cpufreq_driver_target); @@ -1982,7 +2016,7 @@ int cpufreq_update_policy(unsigned int cpu) pr_debug("Driver did not initialize current freq"); policy->cur = new_policy.cur; } else { - if (policy->cur != new_policy.cur && cpufreq_driver->target) + if (policy->cur != new_policy.cur && has_target()) cpufreq_out_of_sync(cpu, policy->cur, new_policy.cur); } @@ -2060,7 +2094,8 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) return -ENODEV;

if (!driver_data || !driver_data->verify || !driver_data->init || - ((!driver_data->setpolicy) && (!driver_data->target))) + !(driver_data->setpolicy || driver_data->target_index || + driver_data->target)) return -EINVAL;

pr_debug("trying to register driver %s\n", driver_data->name); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 6b457d0..93a8c34 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -201,9 +201,11 @@ struct cpufreq_driver {

/* define one out of two */ int (*setpolicy) (struct cpufreq_policy *policy); - int (*target) (struct cpufreq_policy *policy, + int (*target) (struct cpufreq_policy *policy, /* Deprecated */ unsigned int target_freq, unsigned int relation); + int (*target_index) (struct cpufreq_policy *policy, + unsigned int index);

/* should be defined, if possible */ unsigned int (*get) (unsigned int cpu);

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/arm_big_little.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 086f7c1..163e337 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -49,28 +49,21 @@ static unsigned int bL_cpufreq_get(unsigned int cpu)

/* Set clock frequency */ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - u32 cpu = policy->cpu, freq_tab_idx, cur_cluster; + u32 cpu = policy->cpu, cur_cluster; int ret = 0;

cur_cluster = cpu_to_cluster(policy->cpu);

freqs.old = bL_cpufreq_get(policy->cpu); - - /* Determine valid target frequency using freq_table */ - cpufreq_frequency_table_target(policy, freq_table[cur_cluster], - target_freq, relation, &freq_tab_idx); - freqs.new = freq_table[cur_cluster][freq_tab_idx].frequency; + freqs.new = freq_table[cur_cluster][index].frequency;

pr_debug("%s: cpu: %d, cluster: %d, oldfreq: %d, target freq: %d, new freq: %d\n", - __func__, cpu, cur_cluster, freqs.old, target_freq, + __func__, cpu, cur_cluster, freqs.old, freqs.new, freqs.new);

- if (freqs.old == freqs.new) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); @@ -200,7 +193,7 @@ static struct cpufreq_driver bL_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY, .verify = cpufreq_generic_frequency_table_verify, - .target = bL_cpufreq_set_target, + .target_index = bL_cpufreq_set_target, .get = bL_cpufreq_get, .init = bL_cpufreq_init, .exit = bL_cpufreq_exit,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Steven Miao realmz6@gmail.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/blackfin-cpufreq.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index 0bc9e8c..12528b2 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -127,14 +127,11 @@ unsigned long cpu_set_cclk(int cpu, unsigned long new) } #endif

-static int bfin_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int bfin_target(struct cpufreq_policy *policy, unsigned int index) { #ifndef CONFIG_BF60x unsigned int plldiv; #endif - unsigned int index; - unsigned long cclk_hz; struct cpufreq_freqs freqs; static unsigned long lpj_ref; static unsigned int lpj_ref_freq; @@ -144,17 +141,11 @@ static int bfin_target(struct cpufreq_policy *policy, cycles_t cycles; #endif

- if (cpufreq_frequency_table_target(policy, bfin_freq_table, target_freq, - relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; + freqs.new = bfin_freq_table[index].frequency;

pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); + freqs.new, freqs.new, freqs.old);

cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); #ifndef CONFIG_BF60x @@ -209,7 +200,7 @@ static int __bfin_cpu_init(struct cpufreq_policy *policy)

static struct cpufreq_driver bfin_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = bfin_target, + .target_index = bfin_target, .get = bfin_getfreq_khz, .init = __bfin_cpu_init, .exit = cpufreq_generic_exit,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Jesper Nilsson jesper.nilsson@axis.com Cc: Mikael Starvik starvik@axis.com Cc: linux-cris-kernel@axis.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/cris-artpec3-cpufreq.c | 18 ++---------------- drivers/cpufreq/cris-etraxfs-cpufreq.c | 17 ++--------------- 2 files changed, 4 insertions(+), 31 deletions(-)

diff --git a/drivers/cpufreq/cris-artpec3-cpufreq.c b/drivers/cpufreq/cris-artpec3-cpufreq.c index 05fdc7e..841857c 100644 --- a/drivers/cpufreq/cris-artpec3-cpufreq.c +++ b/drivers/cpufreq/cris-artpec3-cpufreq.c @@ -27,8 +27,7 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) return clk_ctrl.pll ? 200000 : 6000; }

-static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) { struct cpufreq_freqs freqs; reg_clkgen_rw_clk_ctrl clk_ctrl; @@ -52,19 +51,6 @@ static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable();

cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, cris_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(policy, newstate);

return 0; } @@ -77,7 +63,7 @@ static int cris_freq_cpu_init(struct cpufreq_policy *policy) static struct cpufreq_driver cris_freq_driver = { .get = cris_freq_get_cpu_frequency, .verify = cpufreq_generic_frequency_table_verify, - .target = cris_freq_target, + .target_index = cris_freq_target, .init = cris_freq_cpu_init, .exit = cpufreq_generic_exit, .name = "cris_freq", diff --git a/drivers/cpufreq/cris-etraxfs-cpufreq.c b/drivers/cpufreq/cris-etraxfs-cpufreq.c index fac2b26..c58811a 100644 --- a/drivers/cpufreq/cris-etraxfs-cpufreq.c +++ b/drivers/cpufreq/cris-etraxfs-cpufreq.c @@ -27,8 +27,7 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) return clk_ctrl.pll ? 200000 : 6000; }

-static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) { struct cpufreq_freqs freqs; reg_config_rw_clk_ctrl clk_ctrl; @@ -52,18 +51,6 @@ static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable();

cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target - (policy, cris_freq_table, target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(policy, newstate);

return 0; } @@ -76,7 +63,7 @@ static int cris_freq_cpu_init(struct cpufreq_policy *policy) static struct cpufreq_driver cris_freq_driver = { .get = cris_freq_get_cpu_frequency, .verify = cpufreq_generic_frequency_table_verify, - .target = cris_freq_target, + .target_index = cris_freq_target, .init = cris_freq_cpu_init, .exit = cpufreq_generic_exit, .name = "cris_freq",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/dbx500-cpufreq.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index a60f769..238b169 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -20,23 +20,13 @@ static struct cpufreq_frequency_table *freq_table; static struct clk *armss_clk;

static int dbx500_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - unsigned int idx; int ret;

- /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx)) - return -EINVAL; - freqs.old = policy->cur; - freqs.new = freq_table[idx].frequency; - - if (freqs.old == freqs.new) - return 0; + freqs.new = freq_table[index].frequency;

/* pre-change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -80,7 +70,7 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy) static struct cpufreq_driver dbx500_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS, .verify = cpufreq_generic_frequency_table_verify, - .target = dbx500_cpufreq_target, + .target_index = dbx500_cpufreq_target, .get = dbx500_cpufreq_getspeed, .init = dbx500_cpufreq_init, .name = "DBX500",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/elanfreq.c | 34 +++------------------------------- 1 file changed, 3 insertions(+), 31 deletions(-)

diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c index d91a645..4ab4153 100644 --- a/drivers/cpufreq/elanfreq.c +++ b/drivers/cpufreq/elanfreq.c @@ -105,20 +105,8 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) }

-/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int elanfreq_target(struct cpufreq_policy *policy, + unsigned int state) { struct cpufreq_freqs freqs;

@@ -162,25 +150,9 @@ static void elanfreq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable();

cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - - -static int elanfreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(policy, newstate);

return 0; } - - /* * Module init and exit code */ @@ -237,7 +209,7 @@ __setup("elanfreq=", elanfreq_setup); static struct cpufreq_driver elanfreq_driver = { .get = elanfreq_get_cpu_frequency, .verify = cpufreq_generic_frequency_table_verify, - .target = elanfreq_target, + .target_index = elanfreq_target, .init = elanfreq_cpu_init, .exit = cpufreq_generic_exit, .name = "elanfreq",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Tony Luck tony.luck@intel.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/ia64-acpi-cpufreq.c | 21 +++------------------ 1 file changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index 90c6598..4695fa2 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -227,26 +227,11 @@ acpi_cpufreq_get ( static int acpi_cpufreq_target ( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - unsigned int next_state = 0; - unsigned int result = 0; - - pr_debug("acpi_cpufreq_setpolicy\n"); - - result = cpufreq_frequency_table_target(policy, - data->freq_table, target_freq, relation, &next_state); - if (result) - return (result); - - result = processor_set_freq(data, policy, next_state); - - return (result); + return processor_set_freq(acpi_io_data[policy->cpu], policy, index); }

- static int acpi_cpufreq_cpu_init ( struct cpufreq_policy *policy) @@ -379,7 +364,7 @@ acpi_cpufreq_cpu_exit (

static struct cpufreq_driver acpi_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = acpi_cpufreq_target, + .target_index = acpi_cpufreq_target, .get = acpi_cpufreq_get, .init = acpi_cpufreq_cpu_init, .exit = acpi_cpufreq_cpu_exit,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Shawn Guo shawn.guo@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/imx6q-cpufreq.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index be23892..07af3b0 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -40,30 +40,17 @@ static unsigned int imx6q_get_speed(unsigned int cpu) return clk_get_rate(arm_clk) / 1000; }

-static int imx6q_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; struct dev_pm_opp *opp; unsigned long freq_hz, volt, volt_old; - unsigned int index; int ret;

- ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &index); - if (ret) { - dev_err(cpu_dev, "failed to match target frequency %d: %d\n", - target_freq, ret); - return ret; - } - freqs.new = freq_table[index].frequency; freq_hz = freqs.new * 1000; freqs.old = clk_get_rate(arm_clk) / 1000;

- if (freqs.old == freqs.new) - return 0; - rcu_read_lock(); opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { @@ -159,7 +146,7 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)

static struct cpufreq_driver imx6q_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = imx6q_set_target, + .target_index = imx6q_set_target, .get = imx6q_get_speed, .init = imx6q_cpufreq_init, .exit = cpufreq_generic_exit,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/longhaul.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 14df497..45bafdd 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -626,21 +626,12 @@ static void longhaul_setup_voltagescaling(void)

static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int table_index) { - unsigned int table_index = 0; unsigned int i; unsigned int dir = 0; u8 vid, current_vid;

- if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, - relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - if (!can_scale_voltage) longhaul_setstate(policy, table_index); else { @@ -919,7 +910,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)

static struct cpufreq_driver longhaul_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = longhaul_target, + .target_index = longhaul_target, .get = longhaul_get, .init = longhaul_cpu_init, .exit = cpufreq_generic_exit,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Dmitry Eremin-Solenikov dbaryshkov@gmail.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/maple-cpufreq.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c index eb1e176..4e2da08 100644 --- a/drivers/cpufreq/maple-cpufreq.c +++ b/drivers/cpufreq/maple-cpufreq.c @@ -131,26 +131,18 @@ static int maple_scom_query_freq(void) */

static int maple_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs; int rc;

- if (cpufreq_frequency_table_target(policy, maple_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (maple_pmode_cur == newstate) - return 0; - mutex_lock(&maple_switch_mutex);

freqs.old = maple_cpu_freqs[maple_pmode_cur].frequency; - freqs.new = maple_cpu_freqs[newstate].frequency; + freqs.new = maple_cpu_freqs[index].frequency;

cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = maple_scom_switch_freq(newstate); + rc = maple_scom_switch_freq(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

mutex_unlock(&maple_switch_mutex); @@ -173,7 +165,7 @@ static struct cpufreq_driver maple_cpufreq_driver = { .flags = CPUFREQ_CONST_LOOPS, .init = maple_cpufreq_cpu_init, .verify = cpufreq_generic_frequency_table_verify, - .target = maple_cpufreq_target, + .target_index = maple_cpufreq_target, .get = maple_cpufreq_get_speed, .attr = cpufreq_generic_attr, };

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/p4-clockmod.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 6164c1c..3c23053 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -105,23 +105,13 @@ static struct cpufreq_frequency_table p4clockmod_table[] = { };

-static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = DC_RESV; struct cpufreq_freqs freqs; int i;

- if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; - - if (freqs.new == freqs.old) - return 0; + freqs.new = stock_freq * p4clockmod_table[index].driver_data / 8;

/* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -131,7 +121,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); + cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data);

/* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); @@ -255,7 +245,7 @@ static unsigned int cpufreq_p4_get(unsigned int cpu)

static struct cpufreq_driver p4clockmod_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = cpufreq_p4_target, + .target_index = cpufreq_p4_target, .init = cpufreq_p4_cpu_init, .exit = cpufreq_generic_exit, .get = cpufreq_p4_get,

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/pmac32-cpufreq.c | 12 +++--------- drivers/cpufreq/pmac64-cpufreq.c | 17 ++++------------- 2 files changed, 7 insertions(+), 22 deletions(-)

diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index 6eac1e2..05f705e 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -374,17 +374,11 @@ static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) }

static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { - unsigned int newstate = 0; int rc;

- if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(policy, newstate, 1); + rc = do_set_cpu_speed(policy, index, 1);

ppc_proc_freq = cur_freq * 1000ul; return rc; @@ -453,7 +447,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)

static struct cpufreq_driver pmac_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = pmac_cpufreq_target, + .target_index = pmac_cpufreq_target, .get = pmac_cpufreq_get_speed, .init = pmac_cpufreq_cpu_init, .suspend = pmac_cpufreq_suspend, diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 5261b92..234b598 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -312,27 +312,18 @@ static int g5_pfunc_query_freq(void) * Common interface to the cpufreq core */

-static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs; int rc;

- if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - mutex_lock(&g5_switch_mutex);

freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; + freqs.new = g5_cpu_freqs[index].frequency;

cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); + rc = g5_switch_freq(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

mutex_unlock(&g5_switch_mutex); @@ -355,7 +346,7 @@ static struct cpufreq_driver g5_cpufreq_driver = { .flags = CPUFREQ_CONST_LOOPS, .init = g5_cpufreq_cpu_init, .verify = cpufreq_generic_frequency_table_verify, - .target = g5_cpufreq_target, + .target_index = g5_cpufreq_target, .get = g5_cpufreq_get_speed, .attr = cpufreq_generic_attr, };

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/ppc-corenet-cpufreq.c | 15 ++++----------- drivers/cpufreq/ppc_cbe_cpufreq.c | 12 ++---------- 2 files changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index a0f562c..79d8e9c 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -251,27 +251,20 @@ static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy) }

static int corenet_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - unsigned int new; struct clk *parent; int ret; struct cpu_data *data = per_cpu(cpu_data, policy->cpu);

- cpufreq_frequency_table_target(policy, data->table, - target_freq, relation, &new); - - if (policy->cur == data->table[new].frequency) - return 0; - freqs.old = policy->cur; - freqs.new = data->table[new].frequency; + freqs.new = data->table[index].frequency;

mutex_lock(&cpufreq_lock); cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

- parent = of_clk_get(data->parent, data->table[new].driver_data); + parent = of_clk_get(data->parent, data->table[index].driver_data); ret = clk_set_parent(data->clk, parent); if (ret) freqs.new = freqs.old; @@ -288,7 +281,7 @@ static struct cpufreq_driver ppc_corenet_cpufreq_driver = { .init = corenet_cpufreq_cpu_init, .exit = __exit_p(corenet_cpufreq_cpu_exit), .verify = cpufreq_generic_frequency_table_verify, - .target = corenet_cpufreq_target, + .target_index = corenet_cpufreq_target, .get = corenet_cpufreq_get_speed, .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index 38540d1..52f707d 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -129,18 +129,10 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) }

static int cbe_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int cbe_pmode_new) { int rc; struct cpufreq_freqs freqs; - unsigned int cbe_pmode_new; - - cpufreq_frequency_table_target(policy, - cbe_freqs, - target_freq, - relation, - &cbe_pmode_new);

freqs.old = policy->cur; freqs.new = cbe_freqs[cbe_pmode_new].frequency; @@ -164,7 +156,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy,

static struct cpufreq_driver cbe_cpufreq_driver = { .verify = cpufreq_generic_frequency_table_verify, - .target = cbe_cpufreq_target, + .target_index = cbe_cpufreq_target, .init = cbe_cpufreq_cpu_init, .exit = cpufreq_generic_exit, .name = "cbe-cpufreq",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: Kukjin Kim kgene.kim@samsung.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/s3c2416-cpufreq.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 26a35d1..4188acc 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -217,24 +217,15 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) }

static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; struct cpufreq_freqs freqs; int idx, ret, to_dvs = 0; - unsigned int i;

mutex_lock(&cpufreq_lock);

- pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation); - - ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table, - target_freq, relation, &i); - if (ret != 0) - goto out; - - idx = s3c_freq->freq_table[i].driver_data; + idx = s3c_freq->freq_table[index].driver_data;

if (idx == SOURCE_HCLK) to_dvs = 1; @@ -256,7 +247,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, */ freqs.new = (s3c_freq->is_dvs && !to_dvs) ? clk_get_rate(s3c_freq->hclk) / 1000 - : s3c_freq->freq_table[i].frequency; + : s3c_freq->freq_table[index].frequency;

pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);

@@ -505,7 +496,7 @@ err_hclk: static struct cpufreq_driver s3c2416_cpufreq_driver = { .flags = 0, .verify = cpufreq_generic_frequency_table_verify, - .target = s3c2416_cpufreq_set_target, + .target_index = s3c2416_cpufreq_set_target, .get = s3c2416_cpufreq_get_speed, .init = s3c2416_cpufreq_driver_init, .name = "s3c2416",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

This drivers wasn't as straight forward as other ones. It was doing some funny stuff to disable driver while going into suspend mode. This part is simplified as well to get this converted to ->target_index().

Cc: Kukjin Kim kgene.kim@samsung.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/s5pv210-cpufreq.c | 54 ++++++++++----------------------------- 1 file changed, 14 insertions(+), 40 deletions(-)

diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 600b4f4..5978b94 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -36,16 +36,7 @@ static DEFINE_MUTEX(set_freq_lock); /* Use 800MHz when entering sleep mode */ #define SLEEP_FREQ (800 * 1000)

-/* - * relation has an additional symantics other than the standard of cpufreq - * DISALBE_FURTHER_CPUFREQ: disable further access to target - * ENABLE_FURTUER_CPUFREQ: enable access to target - */ -enum cpufreq_access { - DISABLE_FURTHER_CPUFREQ = 0x10, - ENABLE_FURTHER_CPUFREQ = 0x20, -}; - +/* Tracks if cpu freqency can be updated anymore */ static bool no_cpufreq_access;

/* @@ -182,12 +173,10 @@ static unsigned int s5pv210_getspeed(unsigned int cpu) return clk_get_rate(cpu_clk) / 1000; }

-static int s5pv210_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) { unsigned long reg; - unsigned int index, priv_index; + unsigned int priv_index; unsigned int pll_changing = 0; unsigned int bus_speed_changing = 0; int arm_volt, int_volt; @@ -195,9 +184,6 @@ static int s5pv210_target(struct cpufreq_policy *policy,

mutex_lock(&set_freq_lock);

- if (relation & ENABLE_FURTHER_CPUFREQ) - no_cpufreq_access = false; - if (no_cpufreq_access) { #ifdef CONFIG_PM_VERBOSE pr_err("%s:%d denied access to %s as it is disabled" @@ -207,27 +193,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, goto exit; }

- if (relation & DISABLE_FURTHER_CPUFREQ) - no_cpufreq_access = true; - - relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ); - freqs.old = s5pv210_getspeed(0); - - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - target_freq, relation, &index)) { - ret = -EINVAL; - goto exit; - } - freqs.new = s5pv210_freq_table[index].frequency;

- if (freqs.new == freqs.old) - goto exit; - /* Finding current running level index */ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - freqs.old, relation, &priv_index)) { + freqs.old, CPUFREQ_RELATION_H, + &priv_index)) { ret = -EINVAL; goto exit; } @@ -559,16 +531,18 @@ static int s5pv210_cpufreq_notifier_event(struct notifier_block *this,

switch (event) { case PM_SUSPEND_PREPARE: - ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - DISABLE_FURTHER_CPUFREQ); + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); if (ret < 0) return NOTIFY_BAD;

+ /* Disable updation of cpu frequency */ + no_cpufreq_access = true; return NOTIFY_OK; case PM_POST_RESTORE: case PM_POST_SUSPEND: - cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - ENABLE_FURTHER_CPUFREQ); + /* Enable updation of cpu frequency */ + no_cpufreq_access = false; + cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0);

return NOTIFY_OK; } @@ -581,18 +555,18 @@ static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, { int ret;

- ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - DISABLE_FURTHER_CPUFREQ); + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); if (ret < 0) return NOTIFY_BAD;

+ no_cpufreq_access = true; return NOTIFY_DONE; }

static struct cpufreq_driver s5pv210_driver = { .flags = CPUFREQ_STICKY, .verify = cpufreq_generic_frequency_table_verify, - .target = s5pv210_target, + .target_index = s5pv210_target, .get = s5pv210_getspeed, .init = s5pv210_cpu_init, .name = "s5pv210",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/sc520_freq.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index 9047ab1..6c86452 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -53,8 +53,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) } }

-static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state) {

struct cpufreq_freqs freqs; @@ -76,24 +75,10 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable();

cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(policy, newstate);

return 0; }

- /* * Module init and exit code */ @@ -117,7 +102,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy) static struct cpufreq_driver sc520_freq_driver = { .get = sc520_freq_get_cpu_frequency, .verify = cpufreq_generic_frequency_table_verify, - .target = sc520_freq_target, + .target_index = sc520_freq_target, .init = sc520_freq_cpu_init, .exit = cpufreq_generic_exit, .name = "sc520_freq",

This patch converts existing .target() to newly defined light weight .target_index() routine for this driver.

CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and will pass index to it.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/cpufreq/speedstep-centrino.c | 27 ++++++++------------------- drivers/cpufreq/speedstep-ich.c | 24 ++++++------------------ drivers/cpufreq/speedstep-smi.c | 20 +++++--------------- 3 files changed, 19 insertions(+), 52 deletions(-)

diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index 25e45f8..c51ec8c 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -416,21 +416,17 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) /** * centrino_setpolicy - set a new CPUFreq policy * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @index: index of target frequency * * Sets a new CPUFreq policy. */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int centrino_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; struct cpufreq_freqs freqs; int retval = 0; unsigned int j, first_cpu, tmp; + struct cpufreq_frequency_table *op_points; cpumask_var_t covered_cpus;

if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) @@ -441,16 +437,8 @@ static int centrino_target (struct cpufreq_policy *policy, goto out; }

- if (unlikely(cpufreq_frequency_table_target(policy, - per_cpu(centrino_model, cpu)->op_points, - target_freq, - relation, - &newstate))) { - retval = -EINVAL; - goto out; - } - first_cpu = 1; + op_points = &per_cpu(centrino_model, cpu)->op_points[index]; for_each_cpu(j, policy->cpus) { int good_cpu;

@@ -474,7 +462,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; }

- msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; + msr = op_points->driver_data;

if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); @@ -489,7 +477,8 @@ static int centrino_target (struct cpufreq_policy *policy, freqs.new = extract_clock(msr, cpu, 0);

pr_debug("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); + op_points->frequency, freqs.old, freqs.new, + msr);

cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -540,7 +529,7 @@ static struct cpufreq_driver centrino_driver = { .init = centrino_cpu_init, .exit = centrino_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, - .target = centrino_target, + .target_index = centrino_target, .get = get_cur_freq, .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c index 1a8b01b..707721e 100644 --- a/drivers/cpufreq/speedstep-ich.c +++ b/drivers/cpufreq/speedstep-ich.c @@ -251,36 +251,24 @@ static unsigned int speedstep_get(unsigned int cpu) /** * speedstep_target - set a new CPUFreq policy * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @index: index of target frequency * * Sets a new CPUFreq policy. */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0, policy_cpu; + unsigned int policy_cpu; struct cpufreq_freqs freqs;

- if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); freqs.old = speedstep_get(policy_cpu); - freqs.new = speedstep_freqs[newstate].frequency; + freqs.new = speedstep_freqs[index].frequency;

pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new);

- /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);

- smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, + smp_call_function_single(policy_cpu, _speedstep_set_state, &index, true);

cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); @@ -330,7 +318,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) static struct cpufreq_driver speedstep_driver = { .name = "speedstep-ich", .verify = cpufreq_generic_frequency_table_verify, - .target = speedstep_target, + .target_index = speedstep_target, .init = speedstep_cpu_init, .exit = cpufreq_generic_exit, .get = speedstep_get, diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index a02b649..19446e4 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -235,29 +235,19 @@ static void speedstep_set_state(unsigned int state) /** * speedstep_target - set a new CPUFreq policy * @policy: new policy - * @target_freq: new freq - * @relation: + * @index: index of new freq * * Sets a new CPUFreq policy/freq. */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs;

- if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - - if (freqs.old == freqs.new) - return 0; + freqs.new = speedstep_freqs[index].frequency;

cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); + speedstep_set_state(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

return 0; @@ -327,7 +317,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", .verify = cpufreq_generic_frequency_table_verify, - .target = speedstep_target, + .target_index = speedstep_target, .init = speedstep_cpu_init, .exit = cpufreq_generic_exit, .get = speedstep_get,