Tree/Branch: next Git describe: next-20140526 Failed boot tests (console logs at the end) =========================================== tegra124-jetson-tk1: FAIL: arm-tegra_defconfig tegra30-beaver: FAIL: arm-tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-imx_v6_v7_defconfig armada-370-mirabox: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig exynos5250-arndale: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig

Full Report ===========

arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.5 sec: PASS da850-evm 0 min 19.5 sec: PASS

arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 20.4 sec: FAIL tegra30-beaver 0 min 18.9 sec: FAIL

arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 33.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.5 sec: PASS omap5-uevm 1 min 55.6 sec: PASS (Warnings: 2) sun7i-a20-cubieboard2 0 min 16.4 sec: PASS

arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 31.5 sec: FAIL imx6dl-wandboard,wand-solo 0 min 19.2 sec: FAIL imx6q-wandboard 0 min 20.7 sec: FAIL

arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 56.0 sec: PASS am335x-boneblack 0 min 29.6 sec: PASS omap3-beagle-xm 1 min 5.8 sec: PASS legacy,3530beagle 0 min 49.3 sec: PASS (Warnings: 1) omap4-panda 1 min 9.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 27.4 sec: PASS (Warnings: 1) am335x-bone 0 min 31.4 sec: PASS omap3-overo-storm-tobi 0 min 26.0 sec: PASS omap5-uevm 1 min 7.0 sec: PASS omap3-n900 0 min 21.4 sec: PASS (Warnings: 1) legacy,n900 0 min 21.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.7 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 25.1 sec: PASS (Warnings: 1)

arm-multi_v7_defconfig ---------------------- am335x-boneblack 0 min 28.1 sec: PASS sun7i-a20-cubieboard2 0 min 16.2 sec: PASS sun4i-a10-cubieboard 0 min 23.4 sec: PASS omap3-overo-tobi 0 min 26.1 sec: PASS (Warnings: 1) am335x-bone 0 min 31.0 sec: PASS tegra124-jetson-tk1 0 min 33.8 sec: PASS armada-370-mirabox 1 min 54.1 sec: FAIL omap4-panda 1 min 11.5 sec: PASS (Warnings: 1) imx6q-wandboard 1 min 46.2 sec: FAIL imx6dl-wandboard,wand-dual 1 min 47.3 sec: FAIL ste-snowball 1 min 24.7 sec: PASS tegra30-beaver 0 min 47.7 sec: PASS omap3-n900 0 min 19.2 sec: PASS (Warnings: 1) qcom-apq8074-dragonboard 0 min 21.4 sec: PASS bcm28155-ap 0 min 31.3 sec: PASS imx6dl-wandboard,wand-solo 1 min 47.4 sec: FAIL omap3-overo-storm-tobi 0 min 27.5 sec: PASS omap3-beagle-xm 1 min 3.5 sec: PASS exynos5420-arndale-octa 0 min 52.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.3 sec: PASS omap5-uevm 1 min 55.8 sec: PASS (Warnings: 2) omap4-panda-es 1 min 7.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 59.3 sec: FAIL

arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.9 sec: PASS sun4i-a10-cubieboard 0 min 21.4 sec: PASS

arm-bcm_defconfig ----------------- bcm28155-ap 0 min 26.1 sec: PASS

arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.7 sec: PASS exynos5250-arndale 0 min 34.7 sec: PASS

arm-u8500_defconfig ------------------- ste-snowball 1 min 56.5 sec: FAIL

arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 24.6 sec: PASS

arm-sama5_defconfig ------------------- sama5d35ek 0 min 21.3 sec: PASS

Console logs for failures =========================

arm-tegra_defconfig -------------------

tegra124-jetson-tk1: FAIL: last 40 lines of boot log: -----------------------------------------------------

[ 2.585482] 3e60: 00000000 00000005 00000008 00000000 00000005 00000000 e9852b80 00000000 [ 2.593646] 3e80: c0618c1c 00000000 00000000 ea78a580 00000000 e9863ea8 c04083c8 c0375f34 [ 2.601809] 3ea0: 80000113 ffffffff c086b44c c086b44c e9862000 00000005 00000001 e9852b80 [ 2.609974] 3ec0: 00000000 c04083c8 c08c1004 c08c0fe0 e9810ed8 c08c1004 00000000 c0422d78 [ 2.618137] 3ee0: ea3edc00 c086b3b0 ea78a580 e9862000 ea78d900 c003a240 ffffffff ea075ecc [ 2.626301] 3f00: 00000001 ea075ed8 00000000 ea3edc00 ea78a580 ea78a594 e9862000 e9862000 [ 2.634465] 3f20: 00000008 ea3edc18 ea78a580 c003a504 c003a4cc e9862000 00000000 00000000 [ 2.642629] 3f40: 00000000 e9842d00 00000000 ea3edc00 c003a4cc 00000000 00000000 00000000 [ 2.650793] 3f60: 00000000 c0040324 ffffbfff 00000000 ffffffff ea3edc00 00000000 00000000 [ 2.658958] 3f80: e9863f80 e9863f80 00000001 00010001 e9863f90 e9863f90 e9863fac e9842d00 [ 2.667123] 3fa0: c0040258 00000000 00000000 c000e8f8 00000000 00000000 00000000 00000000 [ 2.675286] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.683451] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 2.691624] [<c004072c>] (kthread_data) from [<c003b310>] (wq_worker_sleeping+0xc/0xc0) [ 2.699624] [<c003b310>] (wq_worker_sleeping) from [<c05b3d3c>] (__schedule+0x444/0x664) [ 2.707709] [<c05b3d3c>] (__schedule) from [<c002846c>] (do_exit+0x5a8/0x87c) [ 2.714844] [<c002846c>] (do_exit) from [<c001178c>] (die+0x3a0/0x3e8) [ 2.721370] [<c001178c>] (die) from [<c05af8d0>] (__do_kernel_fault.part.9+0x54/0x74) [ 2.729195] [<c05af8d0>] (__do_kernel_fault.part.9) from [<c001b6a4>] (do_page_fault+0x1b0/0x398) [ 2.738057] [<c001b6a4>] (do_page_fault) from [<c00085f4>] (do_DataAbort+0x34/0x98) [ 2.745708] [<c00085f4>] (do_DataAbort) from [<c0011e98>] (__dabt_svc+0x38/0x60) [ 2.753091] Exception stack(0xe9863e60 to 0xe9863ea8) [ 2.758136] 3e60: 00000000 00000005 00000008 00000000 00000005 00000000 e9852b80 00000000 [ 2.766299] 3e80: c0618c1c 00000000 00000000 ea78a580 00000000 e9863ea8 c04083c8 c0375f34 [ 2.774459] 3ea0: 80000113 ffffffff [ 2.777950] [<c0011e98>] (__dabt_svc) from [<c0375f34>] (input_event+0x18/0x70) [ 2.785255] [<c0375f34>] (input_event) from [<c04083c8>] (snd_jack_report+0xb8/0xdc) [ 2.792990] [<c04083c8>] (snd_jack_report) from [<c0422d78>] (snd_soc_jack_report+0xc4/0xe0) [ 2.801419] [<c0422d78>] (snd_soc_jack_report) from [<c003a240>] (process_one_work+0xfc/0x354) [ 2.810021] [<c003a240>] (process_one_work) from [<c003a504>] (worker_thread+0x38/0x564) [ 2.818103] [<c003a504>] (worker_thread) from [<c0040324>] (kthread+0xcc/0xe8) [ 2.825318] [<c0040324>] (kthread) from [<c000e8f8>] (ret_from_fork+0x14/0x3c) [ 2.832533] Code: e513001c e7e00150 e12fff1e e590337c (e5130014) [ 2.838619] ---[ end trace e5fd0c69f6515d22 ]--- [ 2.843226] Fixing recursive fault but reboot is needed! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000018

# PYBOOT: Time: 20.41 seconds. # PYBOOT: Result: FAIL

tegra30-beaver: FAIL: last 40 lines of boot log: ------------------------------------------------

[ 2.196994] 7e80: c0618c1c 00000000 00000000 ea79d580 00000000 ea1b7ea8 c04083c8 c0375f34 [ 2.196999] 7ea0: 80000113 ffffffff c086b44c c086b44c ea1b6000 00000005 00000001 e980c700 [ 2.197003] 7ec0: 00000000 c04083c8 c08c1004 c08c0fe0 ea3fbed8 c08c1004 00000000 c0422d78 [ 2.197007] 7ee0: ea1fc100 c086b3b0 ea79d580 ea1b6000 ea7a0900 c003a240 ea19b940 ea06fecc [ 2.197011] 7f00: 00000001 ea06fed8 00000000 ea1fc100 ea79d580 ea79d594 ea1b6000 ea1b6000 [ 2.197015] 7f20: 00000008 ea1fc118 ea79d580 c003a504 c003a4cc ea1b6000 00000000 00000000 [ 2.197019] 7f40: 00000000 ea202e40 00000000 ea1fc100 c003a4cc 00000000 00000000 00000000 [ 2.197023] 7f60: 00000000 c0040324 00000000 00000000 ea1b7f70 ea1fc100 00000000 00000000 [ 2.197028] 7f80: ea1b7f80 ea1b7f80 00000001 00010001 ea1b7f90 ea1b7f90 ea1b7fac ea202e40 [ 2.197032] 7fa0: c0040258 00000000 00000000 c000e8f8 00000000 00000000 00000000 00000000 [ 2.197036] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.197039] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 febfffff ffffffff [ 2.197048] [<c004072c>] (kthread_data) from [<c003b310>] (wq_worker_sleeping+0xc/0xc0) [ 2.197058] [<c003b310>] (wq_worker_sleeping) from [<c05b3d3c>] (__schedule+0x444/0x664) [ 2.197070] [<c05b3d3c>] (__schedule) from [<c002846c>] (do_exit+0x5a8/0x87c) [ 2.197082] [<c002846c>] (do_exit) from [<c001178c>] (die+0x3a0/0x3e8) [ 2.197098] [<c001178c>] (die) from [<c05af8d0>] (__do_kernel_fault.part.9+0x54/0x74) [ 2.197107] [<c05af8d0>] (__do_kernel_fault.part.9) from [<c001b6a4>] (do_page_fault+0x1b0/0x398) [ 2.197113] [<c001b6a4>] (do_page_fault) from [<c00085f4>] (do_DataAbort+0x34/0x98) [ 2.197120] [<c00085f4>] (do_DataAbort) from [<c0011e98>] (__dabt_svc+0x38/0x60) [ 2.197123] Exception stack(0xea1b7e60 to 0xea1b7ea8) [ 2.197127] 7e60: 00000000 00000005 00000008 00000000 00000005 00000000 e980c700 00000000 [ 2.197131] 7e80: c0618c1c 00000000 00000000 ea79d580 00000000 ea1b7ea8 c04083c8 c0375f34 [ 2.197134] 7ea0: 80000113 ffffffff [ 2.197141] [<c0011e98>] (__dabt_svc) from [<c0375f34>] (input_event+0x18/0x70) [ 2.197147] [<c0375f34>] (input_event) from [<c04083c8>] (snd_jack_report+0xb8/0xdc) [ 2.197152] [<c04083c8>] (snd_jack_report) from [<c0422d78>] (snd_soc_jack_report+0xc4/0xe0) [ 2.197158] [<c0422d78>] (snd_soc_jack_report) from [<c003a240>] (process_one_work+0xfc/0x354) [ 2.197164] [<c003a240>] (process_one_work) from [<c003a504>] (worker_thread+0x38/0x564) [ 2.197169] [<c003a504>] (worker_thread) from [<c0040324>] (kthread+0xcc/0xe8) [ 2.197175] [<c0040324>] (kthread) from [<c000e8f8>] (ret_from_fork+0x14/0x3c) [ 2.197180] Code: e513001c e7e00150 e12fff1e e590337c (e5130014) [ 2.197183] ---[ end trace 7824f5abb59311e5 ]--- [ 2.197185] Fixing recursive fault but reboot is needed! [ 3.196682] tegra-i2c 7000d000.i2c: i2c transfer timed out [ 3.202175] vdd_sata,avdd_plle: coul~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000018

# PYBOOT: Time: 18.85 seconds. # PYBOOT: Result: FAIL

arm-imx_v6_v7_defconfig -----------------------

imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------

r4:be081fb0 [<8001c050>] (do_page_fault) from [<8000852c>] (do_PrefetchAbort+0x3c/0xa0) r10:76f0ff74 r9:00000000 r8:be081fb0 r7:76ec7418 r6:8090264c r5:8001c050 r4:00000007 [<800084f0>] (do_PrefetchAbort) from [<80012ea0>] (ret_from_exception+0x0/0x10) Exception stack(0xbe081fb0 to 0xbe081ff8) 1fa0: 000ac644 00000000 00000044 76ec7418 1fc0: 7e97efd6 0000b65c 00000008 00000000 00000000 00000000 76f0ff74 00000000 1fe0: 76efcef8 7e97ed50 76eefc90 76ec7418 20000010 ffffffff r8:00000000 r7:00000000 r6:ffffffff r5:20000010 r4:76ec7418 Code: bad PC value ---[ end trace 3a8a54443da61ce8 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-rc7-next-20140526 #1 Backtrace: [<80011d84>] (dump_backtrace) from [<80011f20>] (show_stack+0x18/0x1c) r6:808f0e1c r5:00000000 r4:00000000 r3:00000000 [<80011f08>] (show_stack) from [<80666c44>] (dump_stack+0x88/0xa4) [<80666bbc>] (dump_stack) from [<80014ec4>] (handle_IPI+0x148/0x174) r5:808fcd2c r4:00000000 [<80014d7c>] (handle_IPI) from [<800086f0>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:808f5f28 r5:808fce9c r4:f400010c r3:01400000 [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0x808f5f28 to 0x808f5f70) 5f20: 8000f830 808f5f38 00000000 00000000 808f4000 808fc98c 5f40: 808fc938 808f4000 00000000 808f4000 8067088c 808f5f7c 808f5f60 808f5f70 5f60: 800671d0 8000f834 60000113 ffffffff r7:808f5f5c r6:ffffffff r5:60000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<80661798>] (rest_init+0xb0/0xd8) r7:befff9c0 r3:00000000 [<806616e8>] (rest_init) from [<808a1bf8>] (start_kernel+0x340/0x3a4) r5:00000001 r4:808fca38 [<808a18b8>] (start_kernel) from [<10008074>] (0x10008074) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 31.52 seconds. # PYBOOT: Result: FAIL

imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------

r5:9e43f7ec r4:9e43f600 [<8007f324>] (timecounter_read) from [<803f5868>] (fec_time_keep+0x28/0x50) r10:9e43f600 r9:803f5840 r8:803f5840 r7:00000100 r6:80000113 r5:9e43f7ec r4:9e43f600 [<803f5840>] (fec_time_keep) from [<800338e8>] (call_timer_fn+0x74/0xec) r6:00000001 r5:808f4000 r4:808f5e08 r3:808fff70 [<80033874>] (call_timer_fn) from [<80034238>] (run_timer_softirq+0x1c4/0x264) r10:808f60c0 r8:9e43f600 r7:00000000 r6:808f5e48 r5:8095aa80 r4:9e43f854 [<80034074>] (run_timer_softirq) from [<8002da70>] (__do_softirq+0x120/0x26c) r10:808f6080 r9:00000001 r8:00000100 r7:00000001 r6:808f4000 r5:808f6084 r4:00000000 [<8002d950>] (__do_softirq) from [<8002deb4>] (irq_exit+0xb0/0x104) r10:8067088c r9:808f4000 r8:00000000 r7:00000057 r6:808f4000 r5:808f0e1c r4:808f4000 [<8002de04>] (irq_exit) from [<8000f4bc>] (handle_IRQ+0x58/0xb8) r4:808fcd2c r3:00000184 [<8000f464>] (handle_IRQ) from [<800086c0>] (gic_handle_irq+0x30/0x68) r8:00000000 r7:f4000100 r6:808f5f28 r5:808fce9c r4:f400010c r3:000000a0 [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0x808f5f28 to 0x808f5f70) 5f20: 00000001 00000001 00000000 808fff70 808f4000 808fc98c 5f40: 808fc938 808f4000 00000000 808f4000 8067088c 808f5f7c 808f5f40 808f5f70 5f60: 800670e4 8000f834 20000113 ffffffff r7:808f5f5c r6:ffffffff r5:20000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<80661798>] (rest_init+0xb0/0xd8) r7:9efffa00 r3:00000000 [<806616e8>] (rest_init) from [<808a1bf8>] (start_kernel+0x340/0x3a4) r5:00000001 r4:808fca38 [<808a18b8>] (start_kernel) from [<10008074>] (0x10008074) r7:8090164c r6:808e3624 r5:808fc928 r4:80959294 Code: e92dd830 e24cb004 e5103210 e1a04000 (e5935400) ---[ end trace f99f02ee8f989947 ]--- Kernel panic - not syncing: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address a0970400

# PYBOOT: Time: 19.22 seconds. # PYBOOT: Result: FAIL

imx6q-wandboard: FAIL: last 40 lines of boot log: -------------------------------------------------

[<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0xed0b5f70 to 0xed0b5fb8) 5f60: 8000f830 ed0b5f80 00000000 00000000 5f80: ed0b4000 808fc98c 808fc938 ed0b4000 00000000 ed0b4000 8067088c ed0b5fc4 5fa0: ed0b5fa8 ed0b5fb8 800671d0 8000f834 60000113 ffffffff r7:ed0b5fa4 r6:ffffffff r5:60000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<80014b08>] (secondary_start_kernel+0x12c/0x14c) r7:80959318 r3:ed086180 [<800149dc>] (secondary_start_kernel) from [<10008784>] (0x10008784) r5:00000015 r4:7d09806a CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-rc7-next-20140526 #1 Backtrace: [<80011d84>] (dump_backtrace) from [<80011f20>] (show_stack+0x18/0x1c) r6:808f0e1c r5:00000000 r4:00000000 r3:00000000 [<80011f08>] (show_stack) from [<80666c44>] (dump_stack+0x88/0xa4) [<80666bbc>] (dump_stack) from [<80014ec4>] (handle_IPI+0x148/0x174) r5:808fcd2c r4:00000000 [<80014d7c>] (handle_IPI) from [<800086f0>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:808f5f28 r5:808fce9c r4:f400010c r3:01400000 [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0x808f5f28 to 0x808f5f70) 5f20: 8000f830 808f5f38 00000000 00000000 808f4000 808fc98c 5f40: 808fc938 808f4000 00000000 808f4000 8067088c 808f5f7c 808f5f60 808f5f70 5f60: 800671d0 8000f834 60000113 ffffffff r7:808f5f5c r6:ffffffff r5:60000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<80661798>] (rest_init+0xb0/0xd8) r7:ee7ffa00 r3:00000000 [<806616e8>] (rest_init) from [<808a1bf8>] (start_kernel+0x340/0x3a4) r5:00000001 r4:808fca38 [<808a18b8>] (start_kernel) from [<10008074>] (0x10008074) r7:8090164c r6:808e3624 r5:808fc928 r4:80959294 ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000

# PYBOOT: Time: 20.74 seconds. # PYBOOT: Result: FAIL

arm-multi_v7_defconfig ----------------------

armada-370-mirabox: FAIL: last 40 lines of boot log: ----------------------------------------------------

[ 76.138766] [<c02a13f4>] (watchdog_timer_fn) from [<c0261fd8>] (__run_hrtimer.isra.19+0x54/0xe0) [ 76.147570] [<c0261fd8>] (__run_hrtimer.isra.19) from [<c02624c0>] (hrtimer_interrupt+0x10c/0x2dc) [ 76.156548] [<c02624c0>] (hrtimer_interrupt) from [<c06b1120>] (armada_370_xp_timer_interrupt+0x3c/0x4c) [ 76.166049] [<c06b1120>] (armada_370_xp_timer_interrupt) from [<c0284a70>] (handle_percpu_devid_irq+0x68/0x84) [ 76.176072] [<c0284a70>] (handle_percpu_devid_irq) from [<c02811b0>] (generic_handle_irq+0x20/0x30) [ 76.185137] [<c02811b0>] (generic_handle_irq) from [<c020f1b4>] (handle_IRQ+0x38/0x94) [ 76.193071] [<c020f1b4>] (handle_IRQ) from [<c0208750>] (armada_370_xp_handle_irq+0x4c/0xc0) [ 76.201527] [<c0208750>] (armada_370_xp_handle_irq) from [<c0211d00>] (__irq_svc+0x40/0x50) [ 76.209890] Exception stack(0xea053cc0 to 0xea053d08) [ 76.214953] 3cc0: 00000000 ea053d24 ea053d38 00000000 00000000 00000000 ea01d068 ea053d24 [ 76.223147] 3ce0: 00000080 c0c50ea8 ea01d000 ea22fc68 ea053d4c ea053d08 c024e810 c024e5d8 [ 76.231337] 3d00: 40000013 ffffffff [ 76.234835] [<c0211d00>] (__irq_svc) from [<c024e5d8>] (lock_timer_base+0xc/0x48) [ 76.242334] [<c024e5d8>] (lock_timer_base) from [<c024e810>] (try_to_del_timer_sync+0x14/0x58) [ 76.250962] [<c024e810>] (try_to_del_timer_sync) from [<c024e888>] (del_timer_sync+0x34/0x58) [ 76.259504] [<c024e888>] (del_timer_sync) from [<c0603cec>] (xhci_mem_cleanup+0x18/0x444) [ 76.267698] [<c0603cec>] (xhci_mem_cleanup) from [<c0604ea4>] (xhci_mem_init+0xd8c/0x1094) [ 76.275982] [<c0604ea4>] (xhci_mem_init) from [<c05fcd3c>] (xhci_init+0x48/0xac) [ 76.283394] [<c05fcd3c>] (xhci_init) from [<c0601a00>] (xhci_gen_setup+0x1c8/0x1fc) [ 76.291068] [<c0601a00>] (xhci_gen_setup) from [<c060bb2c>] (xhci_pci_setup+0x14/0x60) [ 76.299001] [<c060bb2c>] (xhci_pci_setup) from [<c05e0e50>] (usb_add_hcd+0x210/0x6f0) [ 76.306847] [<c05e0e50>] (usb_add_hcd) from [<c05ef7a4>] (usb_hcd_pci_probe+0x1ac/0x39c) [ 76.314954] [<c05ef7a4>] (usb_hcd_pci_probe) from [<c060be50>] (xhci_pci_probe+0x2c/0x110) [ 76.323234] [<c060be50>] (xhci_pci_probe) from [<c0450e2c>] (pci_device_probe+0x74/0xbc) [ 76.331344] [<c0450e2c>] (pci_device_probe) from [<c05147d8>] (driver_probe_device+0x114/0x23c) [ 76.340061] [<c05147d8>] (driver_probe_device) from [<c051498c>] (__driver_attach+0x8c/0x90) [ 76.348517] [<c051498c>] (__driver_attach) from [<c0512fa4>] (bus_for_each_dev+0x54/0x88) [ 76.356712] [<c0512fa4>] (bus_for_each_dev) from [<c0513f6c>] (bus_add_driver+0xd4/0x1d0) [ 76.364907] [<c0513f6c>] (bus_add_driver) from [<c0514fcc>] (driver_register+0x78/0xf4) [ 76.372929] [<c0514fcc>] (driver_register) from [<c0ad39ec>] (xhci_hcd_init+0x8/0x10) [ 76.380776] [<c0ad39ec>] (xhci_hcd_init) from [<c0208c64>] (do_one_initcall+0x80/0x1b8) [ 76.388798] [<c0208c64>] (do_one_initcall) from [<c0a96c8c>] (kernel_init_freeable+0x100/0x1cc) [ 76.397516] [<c0a96c8c>] (kernel_init_freeable) from [<c07dacc4>] (kernel_init+0x8/0xec) [ 76.405623] [<c07dacc4>] (kernel_init) from [<c020e978>] (ret_from_fork+0x14/0x3c) [ 85.221237] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=16807 jiffies, g=-277, c=-278, q=12) [ 85.231809] INFO: Stall ended before state dump start ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 114.14 seconds. # PYBOOT: Result: FAIL

imx6q-wandboard: FAIL: last 40 lines of boot log: -------------------------------------------------

[ 1.145958] Synopsys Designware Multimedia Card Interface Driver [ 1.152565] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.159053] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.169244] mmc0: no vqmmc regulator found [ 1.173370] mmc0: no vmmc regulator found [ 1.212843] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.220378] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.230553] mmc1: no vqmmc regulator found [ 1.234671] mmc1: no vmmc regulator found [ 1.272840] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.280573] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.289751] mmc2: no vqmmc regulator found [ 1.293868] mmc2: no vmmc regulator found [ 1.314916] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.329066] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.332839] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.333643] usbcore: registered new interface driver usbhid [ 1.333645] usbhid: USB HID core driver [ 1.337618] TCP: cubic registered [ 1.337635] NET: Registered protocol family 17 [ 1.337661] can: controller area network core (rev 20120528 abi 9) [ 1.337717] NET: Registered protocol family 29 [ 1.337734] can: raw protocol (rev 20120528) [ 1.337744] can: broadcast manager protocol (rev 20120528 t) [ 1.337760] can: netlink gateway (rev 20130117) max_hops=1 [ 1.338167] Key type dns_resolver registered [ 1.342162] ThumbEE CPU extension supported. [ 1.342185] Registering SWP/SWPB emulation handler [ 1.343442] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.407185] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.442334] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.455277] mmc1: new SDIO card at address 0001 [ 1.533896] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.551225] mmc2: new high speed SDHC card at address aaaa [ 1.557064] mmcblk0: mmc2:aaaa SU04G 3.69 GiB [ 1.564692] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 106.18 seconds. # PYBOOT: Result: FAIL

imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------

[ 1.131960] Synopsys Designware Multimedia Card Interface Driver [ 1.138590] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.145106] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.155302] mmc0: no vqmmc regulator found [ 1.159428] mmc0: no vmmc regulator found [ 1.198046] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.205687] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.215867] mmc1: no vqmmc regulator found [ 1.219987] mmc1: no vmmc regulator found [ 1.258042] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.265825] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.275004] mmc2: no vqmmc regulator found [ 1.279123] mmc2: no vmmc regulator found [ 1.300217] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.314370] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.318043] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.318869] usbcore: registered new interface driver usbhid [ 1.318872] usbhid: USB HID core driver [ 1.323044] TCP: cubic registered [ 1.323063] NET: Registered protocol family 17 [ 1.323089] can: controller area network core (rev 20120528 abi 9) [ 1.323146] NET: Registered protocol family 29 [ 1.323164] can: raw protocol (rev 20120528) [ 1.323174] can: broadcast manager protocol (rev 20120528 t) [ 1.323190] can: netlink gateway (rev 20130117) max_hops=1 [ 1.323557] Key type dns_resolver registered [ 1.323715] ThumbEE CPU extension supported. [ 1.323740] Registering SWP/SWPB emulation handler [ 1.324969] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.392439] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.427350] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.440037] mmc1: new SDIO card at address 0001 [ 1.501221] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.515544] mmc2: new high speed SD card at address 1234 [ 1.521211] mmcblk0: mmc2:1234 SA02G 1.81 GiB [ 1.527672] mmcblk0: p1 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.31 seconds. # PYBOOT: Result: FAIL

imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------

[ 1.083129] usbcore: registered new interface driver uvcvideo [ 1.088906] USB Video Class driver (1.1.1) [ 1.093035] gspca_main: v2.14.0 registered [ 1.099772] sdhci: Secure Digital Host Controller Interface driver [ 1.105985] sdhci: Copyright(c) Pierre Ossman [ 1.111365] Synopsys Designware Multimedia Card Interface Driver [ 1.117975] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.124526] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.134730] mmc0: no vqmmc regulator found [ 1.138857] mmc0: no vmmc regulator found [ 1.177538] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.185171] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.195352] mmc1: no vqmmc regulator found [ 1.199473] mmc1: no vmmc regulator found [ 1.237532] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.248367] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.257549] mmc2: no vqmmc regulator found [ 1.261655] mmc2: no vmmc regulator found [ 1.302835] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.310912] usbcore: registered new interface driver usbhid [ 1.316531] usbhid: USB HID core driver [ 1.324486] TCP: cubic registered [ 1.327862] NET: Registered protocol family 17 [ 1.332342] can: controller area network core (rev 20120528 abi 9) [ 1.338603] NET: Registered protocol family 29 [ 1.343087] can: raw protocol (rev 20120528) [ 1.347374] can: broadcast manager protocol (rev 20120528 t) [ 1.353087] can: netlink gateway (rev 20130117) max_hops=1 [ 1.358965] Key type dns_resolver registered [ 1.363426] ThumbEE CPU extension supported. [ 1.367746] Registering SWP/SWPB emulation handler [ 1.375839] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.675897] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.690714] mmc2: new high speed SDHC card at address 1234 [ 1.696589] mmcblk0: mmc2:1234 SA04G 3.67 GiB [ 1.703037] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.40 seconds. # PYBOOT: Result: FAIL

exynos5250-arndale: FAIL: last 40 lines of boot log: ----------------------------------------------------

ARNDALE5250 # tftp 0x40800000 192.168.1.2:tmp/arndale-pwGpSt/zImage tftp 0x40800000 192.168.1.2:tmp/arndale-pwGpSt/zImage Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-pwGpSt/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### done Bytes transferred = 4831576 (49b958 hex) ARNDALE5250 # tftp 0x407c0000 192.168.1.2:tmp/arndale-pwGpSt/exynos5250-arndale.dtb tftp 0x407c0000 192.168.1.2:tmp/arndale-pwGpSt/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-pwGpSt/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 35450 (8a7a hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cba79

Starting kernel ...

~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.32 seconds. # PYBOOT: Result: FAIL

arm-u8500_defconfig -------------------

ste-snowball: FAIL: last 40 lines of boot log: ----------------------------------------------

[ 3.443298] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.451171] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.459075] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.471008] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.478302] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.489807] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.498321] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.510253] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.517578] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.529052] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.536865] HS USB OTG: no transceiver configured [ 3.541595] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.549438] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.557342] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.569274] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.576599] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.588073] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596618] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.608551] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.615875] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.627349] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.635162] HS USB OTG: no transceiver configured [ 3.639862] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.647735] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.655639] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.667572] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.674896] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.686370] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.694885] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.706817] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.714141] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.725616] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.733428] HS USB OTG: no transceiver configured [ 3.738128] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.746002] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.753906] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 116.49 seconds. # PYBOOT: Result: FAIL