mainline boot: 30 pass, 3 fail (v3.12-rc6-37-gd24fec3) - linaro-kernel

22 Oct 2013


      Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.12-rc6-37-gd24fec3
Failed boot tests (console logs at the end)
===========================================
                omap3-beagle:     FAIL:    omap2plus_defconfig
        sun4i-a10-cubieboard:     FAIL:    multi_v7_defconfig
                omap3-beagle:     FAIL:    multi_v7_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
            am335x-boneblack     PASS:    0 min 30.1 sec
             omap3-beagle-xm     PASS:    0 min 53.4 sec
                 am335x-bone     PASS:    0 min 26.1 sec
        omap3-tobi,3530overo     PASS:    0 min 21.3 sec
                 omap4-panda     PASS:    1 min  4.8 sec
              omap4-panda-es     PASS:    1 min  5.7 sec
        omap3-tobi,3730storm     PASS:    0 min 24.2 sec
                omap3-beagle     FAIL:    0 min 32.5 sec
tegra_defconfig
---------------
              tegra30-beaver     PASS:    0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
  imx6dl-wandboard,wand-dual     PASS:    0 min 16.1 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 16.1 sec
             imx6q-wandboard     PASS:    0 min 14.7 sec
mvebu_defconfig
---------------
  armada-xp-openblocks-ax3-4     PASS:    0 min 21.9 sec
          armada-370-mirabox     PASS:    0 min 19.9 sec
exynos_defconfig
----------------
          exynos5250-arndale     PASS:    1 min  1.7 sec
multi_v7_defconfig
------------------
                ste-snowball     PASS:    0 min 28.3 sec
              tegra30-beaver     PASS:    0 min 17.2 sec
            am335x-boneblack     PASS:    0 min 34.4 sec
             omap3-beagle-xm     PASS:    0 min 52.9 sec
          armada-370-mirabox     PASS:    0 min 20.6 sec
                 omap4-panda     PASS:    1 min  2.3 sec
              omap4-panda-es     PASS:    1 min  4.3 sec
  armada-xp-openblocks-ax3-4     PASS:    0 min 22.6 sec
        sun4i-a10-cubieboard     FAIL:    0 min  6.9 sec
  imx6dl-wandboard,wand-solo     PASS:    0 min 16.3 sec
        omap3-tobi,3530overo     PASS:    0 min 19.6 sec
                 am335x-bone     PASS:    0 min 33.2 sec
             imx6q-wandboard     PASS:    0 min 15.7 sec
        omap3-tobi,3730storm     PASS:    0 min 19.5 sec
  imx6dl-wandboard,wand-dual     PASS:    0 min 16.5 sec
                omap3-beagle     FAIL:    0 min 30.4 sec
u8500_defconfig
---------------
                ste-snowball     PASS:    0 min 36.1 sec
sama5_defconfig
---------------
                  sama5d35ek     PASS:    0 min 17.3 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap3-beagle: FAIL: last 24 lines of boot log:
    ----------------------------------------------
scanning usb for ethernet devices... 
Warning: asx0 using MAC address from net device
1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org # dhcp
dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
EHCI timed out on TD - token=0x8008d80
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... ~$off
# PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded.
# PYBOOT: Time: 32.55 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
    ------------------------------------------------------
U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology 
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1
GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809
sunxi#setenv ethaddr 2e:40:70:f0:12:08
setenv ethaddr 2e:40:70:f0:12:08
sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4
sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'
sunxi#setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
sunxi#if test -n ${initenv}; then run initenv; fi
if test -n ${initenv}; then run initenv; fi
sunxi#if test -n ${preboot}; then run preboot; fi
if test -n ${preboot}; then run preboot; fi
sunxi#setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
sunxi#dhcp
dhcp
Unknown command 'dhcp' - try 'help'
sunxi#~$off
# PYBOOT: Exception: u-boot: does not support DHCP.  Giving up.
# PYBOOT: Time: 6.93 seconds.
# PYBOOT: Result: FAIL
omap3-beagle: FAIL: last 24 lines of boot log:
    ----------------------------------------------
scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 
Warning: asx0 using MAC address from net device
1 Ethernet Device(s) found
OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no
setenv autoload no; setenv autoboot no
OMAP3 beagleboard.org # dhcp
dhcp
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
ERROR: Need valid 'usbnet_devaddr' to be set
at ether.c:2369/usb_eth_init()
Waiting for Ethernet connection... ~$off
# PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded.
# PYBOOT: Time: 30.40 seconds.
# PYBOOT: Result: FAIL