Automated DT boot report for various ARM defconfigs.
Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo').
Tree/Branch: linus/master Git describe: v3.12-rc2-32-ga153e67 Commit: a153e67bda Merge branch 'akpm' (patches from Andrew Morton)
Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: arm-omap2plus_defconfig
Full Report ===========
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.1 sec
arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 27.5 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda FAIL: 2 min 27.1 sec omap4-panda-es PASS: 1 min 25.7 sec omap3-tobi,3730storm PASS: 0 min 41.4 sec omap3-beagle PASS: 0 min 56.7 sec
arm-multi_v7_defconfig ---------------------- am335x-boneblack PASS: 0 min 31.8 sec omap3-beagle-xm PASS: 0 min 49.5 sec omap4-panda-es PASS: 1 min 11.7 sec omap4-panda PASS: 1 min 0.6 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 40.9 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 50.2 sec
arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 34.2 sec
arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.2 sec
Console logs for failures =========================
arm-omap2plus_defconfig -----------------------
omap4-panda: FAIL: last 24 lines of boot log: ---------------------------------------------
[ 2.348449] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 2.356292] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 2.362731] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.370758] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.381622] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.434936] pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) [ 2.435150] pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x [ 2.452575] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.460235] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.581085] twl_rtc rtc.11: setting system clock to 2013-09-25 03:01:25 UTC (1380078085) [ 2.705810] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.716613] mmc0: new high speed SD card at address aaaa [ 2.724609] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 2.734649] mmcblk0: p1 p2 [ 18.506683] EXT4-fs (mmcblk0p2): recovery complete [ 18.518493] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 18.527191] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 18.537261] devtmpfs: mounted [ 18.541351] Freeing unused kernel memory: 392K (c074f000 - c07b1000) [ 19.040863] init: ureadahead main process (793) terminated with status 5 ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 147.14 seconds. # PYBOOT: Result: FAIL
linaro-kernel@lists.linaro.org