With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
Signed-off-by: Shawn Guo shawn.guo@linaro.org --- It's based on commit fe8e6d0b0e601ca0a63fe768d4b812d5a45a9da7 "arm/dt: Add dtb make rule" from Rob Herring. And it works against Linaro kernel tree. But it needs to go through mainline review before it gets applied.
Changes since v1: * Take suggestion from Rob Herring to move .dts dection into machine sepcific Makefile.boot, so that arch/arm/boot/Makefile can be as clean as it is.
arch/arm/Makefile | 3 +++ arch/arm/boot/Makefile | 2 ++ arch/arm/mach-exynos4/Makefile.boot | 2 ++ arch/arm/mach-mx5/Makefile.boot | 5 +++++ arch/arm/mach-omap2/Makefile.boot | 4 ++++ arch/arm/mach-tegra/Makefile.boot | 2 ++ arch/arm/mach-versatile/Makefile.boot | 2 ++ 7 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+dtb: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 08fc37f..ce39850 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -63,6 +63,8 @@ endif $(obj)/%.dtb: $(src)/dts/%.dts $(call cmd,dtc)
+$(obj)/dtb: $(addprefix $(obj)/, $(dtb-y)) + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956f..fcee6b5 100644 --- a/arch/arm/mach-exynos4/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot @@ -1,2 +1,4 @@ zreladdr-y := 0x40008000 params_phys-y := 0x40000100 + +dtb-$(CONFIG_MACH_SMDKV310) += exynos4-smdkv310.dtb diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index e928be1..4111462 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot @@ -7,3 +7,8 @@ initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000 params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 + +dtb-$(CONFIG_MACH_MX51_BABBAGE) += mx51-babbage.dtb +dtb-$(CONFIG_MACH_MX51_EFIKAMX) += genesi-efikamx.dtb +dtb-$(CONFIG_MACH_MX51_EFIKASB) += genesi-efikasb.dtb +dtb-$(CONFIG_MACH_MX53_LOCO) += mx53-loco.dtb diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 565aff7..0f54901 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y := 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 + +dtb-$(CONFIG_MACH_OMAP3_BEAGLE) += omap3-beagle.dtb +dtb-$(CONFIG_MACH_OMAP4_PANDA) += omap4-panda.dtb +dtb-$(CONFIG_MACH_OVERO) += omap3-overo.dtb diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index db52d61..c98addf 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 + +dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot index c7e75ac..e2227d3 100644 --- a/arch/arm/mach-versatile/Makefile.boot +++ b/arch/arm/mach-versatile/Makefile.boot @@ -2,3 +2,5 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000
+dtb-$(CONFIG_ARCH_VERSATILE_PB) += versatile-pb.dtb +dtb-$(CONFIG_MACH_VERSATILE_AB) += versatile-ab.dtb
On Mon, Apr 04, 2011 at 11:01:47PM +0800, Shawn Guo wrote:
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
Signed-off-by: Shawn Guo shawn.guo@linaro.org
It's based on commit fe8e6d0b0e601ca0a63fe768d4b812d5a45a9da7 "arm/dt: Add dtb make rule" from Rob Herring. And it works against Linaro kernel tree. But it needs to go through mainline review before it gets applied.
Changes since v1:
- Take suggestion from Rob Herring to move .dts dection into machine sepcific Makefile.boot, so that arch/arm/boot/Makefile can be as clean as it is.
Looks good, some minor comments below, but I've picked it up and asked Nicolas to merge it.
Cheers, g.
arch/arm/Makefile | 3 +++ arch/arm/boot/Makefile | 2 ++ arch/arm/mach-exynos4/Makefile.boot | 2 ++ arch/arm/mach-mx5/Makefile.boot | 5 +++++ arch/arm/mach-omap2/Makefile.boot | 4 ++++ arch/arm/mach-tegra/Makefile.boot | 2 ++ arch/arm/mach-versatile/Makefile.boot | 2 ++ 7 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ +dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
Since the target is the same, I've merged this rule with the %.dtb rule. I also renamed the target 'dtbs' because it will build more than one .dtb file.
# We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 08fc37f..ce39850 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -63,6 +63,8 @@ endif $(obj)/%.dtb: $(src)/dts/%.dts $(call cmd,dtc) +$(obj)/dtb: $(addprefix $(obj)/, $(dtb-y))
quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ diff --git a/arch/arm/mach-exynos4/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956f..fcee6b5 100644 --- a/arch/arm/mach-exynos4/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot @@ -1,2 +1,4 @@ zreladdr-y := 0x40008000 params_phys-y := 0x40000100
+dtb-$(CONFIG_MACH_SMDKV310) += exynos4-smdkv310.dtb diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot index e928be1..4111462 100644 --- a/arch/arm/mach-mx5/Makefile.boot +++ b/arch/arm/mach-mx5/Makefile.boot @@ -7,3 +7,8 @@ initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 zreladdr-$(CONFIG_ARCH_MX53) := 0x70008000 params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
+dtb-$(CONFIG_MACH_MX51_BABBAGE) += mx51-babbage.dtb +dtb-$(CONFIG_MACH_MX51_EFIKAMX) += genesi-efikamx.dtb +dtb-$(CONFIG_MACH_MX51_EFIKASB) += genesi-efikasb.dtb +dtb-$(CONFIG_MACH_MX53_LOCO) += mx53-loco.dtb diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 565aff7..0f54901 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y := 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000
+dtb-$(CONFIG_MACH_OMAP3_BEAGLE) += omap3-beagle.dtb +dtb-$(CONFIG_MACH_OMAP4_PANDA) += omap4-panda.dtb +dtb-$(CONFIG_MACH_OVERO) += omap3-overo.dtb diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index db52d61..c98addf 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
+dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot index c7e75ac..e2227d3 100644 --- a/arch/arm/mach-versatile/Makefile.boot +++ b/arch/arm/mach-versatile/Makefile.boot @@ -2,3 +2,5 @@ params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 +dtb-$(CONFIG_ARCH_VERSATILE_PB) += versatile-pb.dtb
+dtb-$(CONFIG_MACH_VERSATILE_AB) += versatile-ab.dtb
1.7.1
devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
On Mon, Apr 04, 2011 at 10:48:27PM -0600, Grant Likely wrote:
On Mon, Apr 04, 2011 at 11:01:47PM +0800, Shawn Guo wrote:
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
Signed-off-by: Shawn Guo shawn.guo@linaro.org
It's based on commit fe8e6d0b0e601ca0a63fe768d4b812d5a45a9da7 "arm/dt: Add dtb make rule" from Rob Herring. And it works against Linaro kernel tree. But it needs to go through mainline review before it gets applied.
Changes since v1:
- Take suggestion from Rob Herring to move .dts dection into machine sepcific Makefile.boot, so that arch/arm/boot/Makefile can be as clean as it is.
Looks good, some minor comments below, but I've picked it up and asked Nicolas to merge it.
Cheers, g.
arch/arm/Makefile | 3 +++ arch/arm/boot/Makefile | 2 ++ arch/arm/mach-exynos4/Makefile.boot | 2 ++ arch/arm/mach-mx5/Makefile.boot | 5 +++++ arch/arm/mach-omap2/Makefile.boot | 4 ++++ arch/arm/mach-tegra/Makefile.boot | 2 ++ arch/arm/mach-versatile/Makefile.boot | 2 ++ 7 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ +dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
Since the target is the same, I've merged this rule with the %.dtb rule. I also renamed the target 'dtbs' because it will build more than one .dtb file.
I started with 'dtbs' as target name, and later changed it to 'dtb' to align with $(dtb-y). And 'dtbs' looks truly fine for me, but you may want to change commit message accordingly, as there is 'make ARCH=arm dtb' in it.
On Tue, Apr 05, 2011 at 03:09:05PM +0800, Shawn Guo wrote:
On Mon, Apr 04, 2011 at 10:48:27PM -0600, Grant Likely wrote:
On Mon, Apr 04, 2011 at 11:01:47PM +0800, Shawn Guo wrote:
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
Signed-off-by: Shawn Guo shawn.guo@linaro.org
It's based on commit fe8e6d0b0e601ca0a63fe768d4b812d5a45a9da7 "arm/dt: Add dtb make rule" from Rob Herring. And it works against Linaro kernel tree. But it needs to go through mainline review before it gets applied.
Changes since v1:
- Take suggestion from Rob Herring to move .dts dection into machine sepcific Makefile.boot, so that arch/arm/boot/Makefile can be as clean as it is.
Looks good, some minor comments below, but I've picked it up and asked Nicolas to merge it.
Cheers, g.
arch/arm/Makefile | 3 +++ arch/arm/boot/Makefile | 2 ++ arch/arm/mach-exynos4/Makefile.boot | 2 ++ arch/arm/mach-mx5/Makefile.boot | 5 +++++ arch/arm/mach-omap2/Makefile.boot | 4 ++++ arch/arm/mach-tegra/Makefile.boot | 2 ++ arch/arm/mach-versatile/Makefile.boot | 2 ++ 7 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ +dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
Since the target is the same, I've merged this rule with the %.dtb rule. I also renamed the target 'dtbs' because it will build more than one .dtb file.
I started with 'dtbs' as target name, and later changed it to 'dtb' to align with $(dtb-y). And 'dtbs' looks truly fine for me, but you may want to change commit message accordingly, as there is 'make ARCH=arm dtb' in it.
Thanks, fixed in my devicetree/test tree and also added something to the help text.
g.
On 04/04/2011 04:01 PM, Somebody in the thread at some point said:
Hi -
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
The version of this that went into linux-linaro-2.6.38 looks like this
X-Git-Url: http://git.linaro.org/gitweb?p=kernel%2Flinux-linaro-2.6.38.git%3Ba=blobdiff...
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..1be856a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -289,7 +289,7 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: +dtbs %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
On recent make, it breaks build of the kernel immediately:
/projects/linaro/linux-2.6/arch/arm/Makefile:292: *** mixed implicit and normal rules. Stop.
$ rpm -q make make-3.82-4.fc15.x86_64
''The previous behavior of mixing implicit and pattern rules in one line like that was never supported or documented, but due to a "hole" in the parser it worked for certain specific cases (for example, reversing that line so the pattern comes first would not work, nor would adding extra explicit targets after the pattern target).
In 3.82, the parser was tightened in this respect and that "hole" was closed, hence you see this error.''
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html
I worked around it by changing the line back to just say
%.dtb:
but I don't know if that does what was actually intended the same; according to the linked make ml post it may need to be two clauses.
-Andy
On Thu, Apr 07, 2011 at 08:30:03AM +0100, Andy Green wrote:
On 04/04/2011 04:01 PM, Somebody in the thread at some point said:
Hi -
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
The version of this that went into linux-linaro-2.6.38 looks like this
X-Git-Url: http://git.linaro.org/gitweb?p=kernel%2Flinux-linaro-2.6.38.git%3Ba=blobdiff...
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..1be856a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -289,7 +289,7 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: +dtbs %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
On recent make, it breaks build of the kernel immediately:
/projects/linaro/linux-2.6/arch/arm/Makefile:292: *** mixed implicit and normal rules. Stop.
$ rpm -q make make-3.82-4.fc15.x86_64
''The previous behavior of mixing implicit and pattern rules in one line like that was never supported or documented, but due to a "hole" in the parser it worked for certain specific cases (for example, reversing that line so the pattern comes first would not work, nor would adding extra explicit targets after the pattern target).
In 3.82, the parser was tightened in this respect and that "hole" was closed, hence you see this error.''
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html
I worked around it by changing the line back to just say
%.dtb:
but I don't know if that does what was actually intended the same; according to the linked make ml post it may need to be two clauses.
Thanks, Andy.
I just confirmed that make 3.81 works fine with the mixed rules, but 3.82 did fail for the exactly same reason you gave above.
Grant,
Should we break the mixed rules back to two separated rules to get the patch survive with make 3.82?
On Fri, Apr 08, 2011 at 12:39:50AM +0800, Shawn Guo wrote:
On Thu, Apr 07, 2011 at 08:30:03AM +0100, Andy Green wrote:
On 04/04/2011 04:01 PM, Somebody in the thread at some point said:
Hi -
With 'make ARCH=arm dtb', it builds Device Tree Blobs for those boards enabled by build CONFIG.
index d51ab6c..7fd2af9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -292,6 +292,9 @@ zinstall uinstall install: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
The version of this that went into linux-linaro-2.6.38 looks like this
X-Git-Url: http://git.linaro.org/gitweb?p=kernel%2Flinux-linaro-2.6.38.git%3Ba=blobdiff...
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index d51ab6c..1be856a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -289,7 +289,7 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: +dtbs %.dtb: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
On recent make, it breaks build of the kernel immediately:
/projects/linaro/linux-2.6/arch/arm/Makefile:292: *** mixed implicit and normal rules. Stop.
$ rpm -q make make-3.82-4.fc15.x86_64
''The previous behavior of mixing implicit and pattern rules in one line like that was never supported or documented, but due to a "hole" in the parser it worked for certain specific cases (for example, reversing that line so the pattern comes first would not work, nor would adding extra explicit targets after the pattern target).
In 3.82, the parser was tightened in this respect and that "hole" was closed, hence you see this error.''
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html
I worked around it by changing the line back to just say
%.dtb:
but I don't know if that does what was actually intended the same; according to the linked make ml post it may need to be two clauses.
That rule is just a pass through to build the targets in the arch/arm/boot Makefile.
Thanks, Andy.
I just confirmed that make 3.81 works fine with the mixed rules, but 3.82 did fail for the exactly same reason you gave above.
Grant,
Should we break the mixed rules back to two separated rules to get the patch survive with make 3.82?
Yes, please do.
Thanks, g.
Mixing implicit and pattern rules in one line works for make 3.81 as a 'hole' in the parser for certain specific cases. In 3.82, the parser was tightened in this respect and that "hole" was closed, hence the mixing of rules "dtbs %.dtb:" causes the following error.
[path]/arch/arm/Makefile:292: *** mixed implicit and normal rules. Stop.
The patch is to fix the error by writing the mixing rules into two.
Reported-by: Andy Green andy.green@linaro.org Signed-off-by: Shawn Guo shawn.guo@linaro.org --- arch/arm/Makefile | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1be856a..bb797e4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -289,7 +289,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-dtbs %.dtb: +%.dtb: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + +dtbs: $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
# We use MRPROPER_FILES and CLEAN_FILES now
linaro-kernel@lists.linaro.org
-
Andy Green -
Grant Likely -
Shawn Guo -
Shawn Guo