- Linux-stable-mirror - lists.linaro.org

Patch "neighbour: update neigh timestamps iff update is effective" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled neighbour: update neigh timestamps iff update is effective to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: neighbour-update-neigh-timestamps-iff-update-is-effective.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ihar Hrachyshka <ihrachys(a)redhat.com> Date: Tue, 16 May 2017 08:44:24 -0700 Subject: neighbour: update neigh timestamps iff update is effective From: Ihar Hrachyshka <ihrachys(a)redhat.com> [ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ] It's a common practice to send gratuitous ARPs after moving an IP address to another device to speed up healing of a service. To fulfill service availability constraints, the timing of network peers updating their caches to point to a new location of an IP address can be particularly important. Sometimes neigh_update calls won't touch neither lladdr nor state, for example if an update arrives in locktime interval. The neigh->updated value is tested by the protocol specific neigh code, which in turn will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the call to neigh_update() or not. As a result, we may effectively ignore the update request, bailing out of touching the neigh entry, except that we still bump its timestamps inside neigh_update. This may be a problem for updates arriving in quick succession. For example, consider the following scenario: A service is moved to another device with its IP address. The new device sends three gratuitous ARP requests into the network with ~1 seconds interval between them. Just before the first request arrives to one of network peer nodes, its neigh entry for the IP address transitions from STALE to DELAY. This transition, among other things, updates neigh->updated. Once the kernel receives the first gratuitous ARP, it ignores it because its arrival time is inside the locktime interval. The kernel still bumps neigh->updated. Then the second gratuitous ARP request arrives, and it's also ignored because it's still in the (new) locktime interval. Same happens for the third request. The node eventually heals itself (after delay_first_probe_time seconds since the initial transition to DELAY state), but it just wasted some time and require a new ARP request/reply round trip. This unfortunate behaviour both puts more load on the network, as well as reduces service availability. This patch changes neigh_update so that it bumps neigh->updated (as well as neigh->confirmed) only once we are sure that either lladdr or entry state will change). In the scenario described above, it means that the second gratuitous ARP request will actually update the entry lladdr. Ideally, we would update the neigh entry on the very first gratuitous ARP request. The locktime mechanism is designed to ignore ARP updates in a short timeframe after a previous ARP update was honoured by the kernel layer. This would require tracking timestamps for state transitions separately from timestamps when actual updates are received. This would probably involve changes in neighbour struct. Therefore, the patch doesn't tackle the issue of the first gratuitous APR ignored, leaving it for a follow-up. Signed-off-by: Ihar Hrachyshka <ihrachys(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/neighbour.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1132,10 +1132,6 @@ int neigh_update(struct neighbour *neigh lladdr = neigh->ha; } - if (new & NUD_CONNECTED) - neigh->confirmed = jiffies; - neigh->updated = jiffies; - /* If entry was valid and address is not changed, do not change entry state, if new one is STALE. */ @@ -1159,6 +1155,16 @@ int neigh_update(struct neighbour *neigh } } + /* Update timestamps only once we know we will make a change to the + * neighbour entry. Otherwise we risk to move the locktime window with + * noop updates and ignore relevant ARP updates. + */ + if (new != old || lladdr != neigh->ha) { + if (new & NUD_CONNECTED) + neigh->confirmed = jiffies; + neigh->updated = jiffies; + } + if (new != old) { neigh_del_timer(neigh); if (new & NUD_PROBE) Patches currently in stable-queue which might be from ihrachys(a)redhat.com are queue-4.4/arp-honour-gratuitous-arp-_replies_.patch queue-4.4/neighbour-update-neigh-timestamps-iff-update-is-effective.patch

7 years, 2 months

1
0
0 0

Patch "mlx5: fix bug reading rss_hash_type from CQE" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mlx5: fix bug reading rss_hash_type from CQE to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mlx5-fix-bug-reading-rss_hash_type-from-cqe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jesper Dangaard Brouer <brouer(a)redhat.com> Date: Mon, 22 May 2017 20:13:07 +0200 Subject: mlx5: fix bug reading rss_hash_type from CQE From: Jesper Dangaard Brouer <brouer(a)redhat.com> [ Upstream commit 12e8b570e732eaa5eae3a2895ba3fbcf91bde2b4 ] Masks for extracting part of the Completion Queue Entry (CQE) field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and CQE_RSS_HTYPE_L4. The bug resulted in setting skb->l4_hash, even-though the rss_hash_type indicated that hash was NOT computed over the L4 (UDP or TCP) part of the packet. Added comments from the datasheet, to make it more clear what these masks are selecting. Signed-off-by: Jesper Dangaard Brouer <brouer(a)redhat.com> Acked-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/mlx5/device.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -635,8 +635,14 @@ enum { }; enum { - CQE_RSS_HTYPE_IP = 0x3 << 6, - CQE_RSS_HTYPE_L4 = 0x3 << 2, + CQE_RSS_HTYPE_IP = 0x3 << 2, + /* cqe->rss_hash_type[3:2] - IP destination selected for hash + * (00 = none, 01 = IPv4, 10 = IPv6, 11 = Reserved) + */ + CQE_RSS_HTYPE_L4 = 0x3 << 6, + /* cqe->rss_hash_type[7:6] - L4 destination selected for hash + * (00 = none, 01 = TCP. 10 = UDP, 11 = IPSEC.SPI + */ }; enum { Patches currently in stable-queue which might be from brouer(a)redhat.com are queue-4.4/mlx5-fix-bug-reading-rss_hash_type-from-cqe.patch

7 years, 2 months

1
0
0 0

Patch "mISDN: Fix a sleep-in-atomic bug" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mISDN: Fix a sleep-in-atomic bug to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: misdn-fix-a-sleep-in-atomic-bug.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Wed, 31 May 2017 15:08:25 +0800 Subject: mISDN: Fix a sleep-in-atomic bug From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 93818da5eed63fbc17b64080406ea53b86b23309 ] The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -72,7 +72,7 @@ send_socklist(struct mISDN_sock_list *sl if (sk->sk_state != MISDN_BOUND) continue; if (!cskb) - cskb = skb_copy(skb, GFP_KERNEL); + cskb = skb_copy(skb, GFP_ATOMIC); if (!cskb) { printk(KERN_WARNING "%s no skb\n", __func__); break; Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.4/misdn-fix-a-sleep-in-atomic-bug.patch queue-4.4/qlcnic-fix-a-sleep-in-atomic-bug-in-qlcnic_82xx_hw_write_wx_2m-and-qlcnic_82xx_hw_read_wx_2m.patch

7 years, 2 months

1
0
0 0

Patch "MIPS: mm: fixed mappings: correct initialisation" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: mm: fixed mappings: correct initialisation to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-mm-fixed-mappings-correct-initialisation.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Tue, 11 Apr 2017 09:00:34 +0200 Subject: MIPS: mm: fixed mappings: correct initialisation From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit 71eb989ab5a110df8bcbb9609bacde73feacbedd ] fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15948/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/mm/pgtable-32.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -51,15 +51,15 @@ void __init pagetable_init(void) /* * Fixed mappings: */ - vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; - fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base); + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1); + fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base); #ifdef CONFIG_HIGHMEM /* * Permanent kmaps: */ vaddr = PKMAP_BASE; - fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); + fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); pgd = swapper_pg_dir + __pgd_offset(vaddr); pud = pud_offset(pgd, vaddr); Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 2 months

1
0
0 0

Patch "MIPS: mm: adjust PKMAP location" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: mm: adjust PKMAP location to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-mm-adjust-pkmap-location.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Tue, 11 Apr 2017 09:00:36 +0200 Subject: MIPS: mm: adjust PKMAP location From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit c56e7a4c3e77f6fbd9b55c06c14eda65aae58958 ] Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START. For large page sizes this is not the case as eg. for 64k pages the range currently defined is from 0xfe000000 to 0x102000000(!!) which obviously isn't right. Remove the hardcoded location and set the BASE address as an offset from FIXADDR_START. Since all PKMAP ptes have to be placed in a contiguous memory, ensure that this is the case by placing them all in a single page. This is achieved by aligning the end address to pkmap pages count pages. Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15950/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/pgtable-32.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -18,6 +18,10 @@ #include <asm-generic/pgtable-nopmd.h> +#ifdef CONFIG_HIGHMEM +#include <asm/highmem.h> +#endif + extern int temp_tlb_entry; /* @@ -61,7 +65,8 @@ extern int add_temporary_entry(unsigned #define VMALLOC_START MAP_BASE -#define PKMAP_BASE (0xfe000000UL) +#define PKMAP_END ((FIXADDR_START) & ~((LAST_PKMAP << PAGE_SHIFT)-1)) +#define PKMAP_BASE (PKMAP_END - PAGE_SIZE * LAST_PKMAP) #ifdef CONFIG_HIGHMEM # define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 2 months

1
0
0 0

Patch "MIPS: kprobes: flush_insn_slot should flush only if probe initialised" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: kprobes: flush_insn_slot should flush only if probe initialised to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Thu, 8 Jun 2017 15:20:32 +0200 Subject: MIPS: kprobes: flush_insn_slot should flush only if probe initialised From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ] When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.") Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/kprobes.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -40,7 +40,8 @@ typedef union mips_instruction kprobe_op #define flush_insn_slot(p) \ do { \ - flush_icache_range((unsigned long)p->addr, \ + if (p->addr) \ + flush_icache_range((unsigned long)p->addr, \ (unsigned long)p->addr + \ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t))); \ } while (0) Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 2 months

1
0
0 0

Patch "media: videobuf2-core: don't go out of the buffer range" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: videobuf2-core: don't go out of the buffer range to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-videobuf2-core-don-t-go-out-of-the-buffer-range.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Date: Thu, 28 Dec 2017 09:16:47 -0500 Subject: media: videobuf2-core: don't go out of the buffer range From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> [ Upstream commit df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ] Currently, there's no check if an invalid buffer range is passed. However, while testing DVB memory mapped apps, I got this: videobuf2_core: VB: num_buffers -2143943680, buffer 33, index -2143943647 unable to handle kernel paging request at ffff888b773c0890 IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] PGD 4142c7067 P4D 4142c7067 PUD 0 Oops: 0002 [#1] SMP Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper e1000e ptp drm crc32c_intel video pps_core CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff88877c73bc80 task.stack: ffffb7c402418000 RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: 0018:ffffb7c40241bc60 EFLAGS: 00010246 RAX: 0000000080360421 RBX: 0000000000000021 RCX: 000000000000000a RDX: ffffb7c40241bcf4 RSI: ffff888780362c60 RDI: ffff888796d8e130 RBP: ffffb7c40241bcc8 R08: 0000000000000316 R09: 0000000000000004 R10: ffff888780362c00 R11: 0000000000000001 R12: 000000000002f000 R13: ffff8887758be700 R14: 0000000000021000 R15: 0000000000000001 FS: 00007f2849024740(0000) GS:ffff888796d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888b773c0890 CR3: 000000043beb2005 CR4: 00000000003606e0 Call Trace: vb2_core_reqbufs+0x226/0x420 [videobuf2_core] dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core] dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core] dvb_usercopy+0x53/0x1b0 [dvb_core] ? dvb_demux_ioctl+0x20/0x20 [dvb_core] ? tty_ldisc_deref+0x16/0x20 ? tty_write+0x1f9/0x310 ? process_echoes+0x70/0x70 dvb_dvr_ioctl+0x15/0x20 [dvb_core] do_vfs_ioctl+0xa5/0x600 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x7f28486f7ea7 RSP: 002b:00007ffc13b2db18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055b10fc06130 RCX: 00007f28486f7ea7 RDX: 00007ffc13b2db48 RSI: 00000000c0086f3c RDI: 0000000000000007 RBP: 0000000000000203 R08: 000055b10df1e02c R09: 000000000000002e R10: 0036b42415108357 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f2849062f60 R14: 00000000000001f1 R15: 00007ffc13b2da54 Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: ffffb7c40241bc60 CR2: ffff888b773c0890 So, add a sanity check in order to prevent going past array. Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Acked-by: Sakari Ailus <sakari.ailus(a)linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/v4l2-core/videobuf2-core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -205,6 +205,10 @@ static int __vb2_queue_alloc(struct vb2_ struct vb2_buffer *vb; int ret; + /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ + num_buffers = min_t(unsigned int, num_buffers, + VB2_MAX_FRAME - q->num_buffers); + for (buffer = 0; buffer < num_buffers; ++buffer) { /* Allocate videobuf buffer structures */ vb = kzalloc(q->buf_struct_size, GFP_KERNEL); Patches currently in stable-queue which might be from mchehab(a)s-opensource.com are queue-4.4/media-videobuf2-core-don-t-go-out-of-the-buffer-range.patch queue-4.4/cx25840-fix-unchecked-return-values.patch queue-4.4/mceusb-sporadic-rx-truncation-corruption-fix.patch

7 years, 2 months

1
0
0 0

Patch "md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-raid5-make-use-of-spin_lock_irq-over-local_irq_disable-spin_lock.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Julia Cartwright <julia(a)ni.com> Date: Fri, 28 Apr 2017 12:41:02 -0500 Subject: md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock From: Julia Cartwright <julia(a)ni.com> [ Upstream commit 3d05f3aed5d721c2c77d20288c29ab26c6193ed5 ] On mainline, there is no functional difference, just less code, and symmetric lock/unlock paths. On PREEMPT_RT builds, this fixes the following warning, seen by Alexander GQ Gerasiov, due to the sleeping nature of spinlocks. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993 in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1 CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G W 4.9.20-rt16-stand6-686 #1 Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: dump_stack+0x47/0x68 ? migrate_enable+0x4a/0xf0 ___might_sleep+0x101/0x180 rt_spin_lock+0x17/0x40 add_stripe_bio+0x4e3/0x6c0 [raid456] ? preempt_count_add+0x42/0xb0 raid5_make_request+0x737/0xdd0 [raid456] Reported-by: Alexander GQ Gerasiov <gq(a)redlab-i.ru> Tested-by: Alexander GQ Gerasiov <gq(a)redlab-i.ru> Signed-off-by: Julia Cartwright <julia(a)ni.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid5.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -110,8 +110,7 @@ static inline void unlock_device_hash_lo static inline void lock_all_device_hash_locks_irq(struct r5conf *conf) { int i; - local_irq_disable(); - spin_lock(conf->hash_locks); + spin_lock_irq(conf->hash_locks); for (i = 1; i < NR_STRIPE_HASH_LOCKS; i++) spin_lock_nest_lock(conf->hash_locks + i, conf->hash_locks); spin_lock(&conf->device_lock); @@ -121,9 +120,9 @@ static inline void unlock_all_device_has { int i; spin_unlock(&conf->device_lock); - for (i = NR_STRIPE_HASH_LOCKS; i; i--) - spin_unlock(conf->hash_locks + i - 1); - local_irq_enable(); + for (i = NR_STRIPE_HASH_LOCKS - 1; i; i--) + spin_unlock(conf->hash_locks + i); + spin_unlock_irq(conf->hash_locks); } /* bio's attached to a stripe+device for I/O are linked together in bi_sector @@ -726,12 +725,11 @@ static bool is_full_stripe_write(struct static void lock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) { - local_irq_disable(); if (sh1 > sh2) { - spin_lock(&sh2->stripe_lock); + spin_lock_irq(&sh2->stripe_lock); spin_lock_nested(&sh1->stripe_lock, 1); } else { - spin_lock(&sh1->stripe_lock); + spin_lock_irq(&sh1->stripe_lock); spin_lock_nested(&sh2->stripe_lock, 1); } } @@ -739,8 +737,7 @@ static void lock_two_stripes(struct stri static void unlock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2) { spin_unlock(&sh1->stripe_lock); - spin_unlock(&sh2->stripe_lock); - local_irq_enable(); + spin_unlock_irq(&sh2->stripe_lock); } /* Only freshly new full stripe normal write stripe can be added to a batch list */ Patches currently in stable-queue which might be from julia(a)ni.com are queue-4.4/md-raid5-make-use-of-spin_lock_irq-over-local_irq_disable-spin_lock.patch

7 years, 2 months

1
0
0 0

Patch "md-cluster: fix potential lock issue in add_new_disk" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md-cluster: fix potential lock issue in add_new_disk to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-cluster-fix-potential-lock-issue-in-add_new_disk.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Guoqing Jiang <gqjiang(a)suse.com> Date: Tue, 16 May 2017 14:01:25 +0800 Subject: md-cluster: fix potential lock issue in add_new_disk From: Guoqing Jiang <gqjiang(a)suse.com> [ Upstream commit 2dffdc0724004f38f5e39907747b53e4b0d80e59 ] The add_new_disk returns with communication locked if __sendmsg returns failure, fix it with call unlock_comm before return. Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> CC: Goldwyn Rodrigues <rgoldwyn(a)suse.com> Signed-off-by: Guoqing Jiang <gqjiang(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/md-cluster.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/md/md-cluster.c +++ b/drivers/md/md-cluster.c @@ -945,8 +945,10 @@ static int add_new_disk(struct mddev *md cmsg.raid_slot = cpu_to_le32(rdev->desc_nr); lock_comm(cinfo); ret = __sendmsg(cinfo, &cmsg); - if (ret) + if (ret) { + unlock_comm(cinfo); return ret; + } cinfo->no_new_dev_lockres->flags |= DLM_LKF_NOQUEUE; ret = dlm_lock_sync(cinfo->no_new_dev_lockres, DLM_LOCK_EX); cinfo->no_new_dev_lockres->flags &= ~DLM_LKF_NOQUEUE; Patches currently in stable-queue which might be from gqjiang(a)suse.com are queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch

7 years, 2 months

1
0
0 0

Patch "[media] mceusb: sporadic RX truncation corruption fix" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] mceusb: sporadic RX truncation corruption fix to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mceusb-sporadic-rx-truncation-corruption-fix.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: A Sun <as1033x(a)comcast.net> Date: Sun, 26 Mar 2017 15:33:07 -0300 Subject: [media] mceusb: sporadic RX truncation corruption fix From: A Sun <as1033x(a)comcast.net> [ Upstream commit 8e175b22e8640bf3a58e071af54190b909e4a944 ] Intermittent RX truncation and loss of IR received data. This resulted in receive stream synchronization errors where driver attempted to incorrectly parse IR data (eg 0x90 below) as command response. [ 3969.139898] mceusb 1-1.2:1.0: processed IR data [ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2) [ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90 [ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25) [ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples [ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000 Bug trigger appears to be normal, but heavy, IR receiver use. Signed-off-by: A Sun <as1033x(a)comcast.net> Signed-off-by: Sean Young <sean(a)mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/rc/mceusb.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1370,8 +1370,13 @@ static int mceusb_dev_probe(struct usb_i goto rc_dev_fail; /* wire up inbound data handler */ - usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, - mceusb_dev_recv, ir, ep_in->bInterval); + if (usb_endpoint_xfer_int(ep_in)) + usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, + mceusb_dev_recv, ir, ep_in->bInterval); + else + usb_fill_bulk_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, + mceusb_dev_recv, ir); + ir->urb_in->transfer_dma = ir->dma_in; ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; Patches currently in stable-queue which might be from as1033x(a)comcast.net are queue-4.4/mceusb-sporadic-rx-truncation-corruption-fix.patch

7 years, 2 months

1
0
0 0

Patch "mac80211: bail out from prep_connection() if a reconfig is ongoing" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211: bail out from prep_connection() if a reconfig is ongoing to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211-bail-out-from-prep_connection-if-a-reconfig-is-ongoing.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Luca Coelho <luciano.coelho(a)intel.com> Date: Tue, 2 May 2017 17:56:21 +0300 Subject: mac80211: bail out from prep_connection() if a reconfig is ongoing From: Luca Coelho <luciano.coelho(a)intel.com> [ Upstream commit f8860ce836f2d502b07ef99559707fe55d90f5bc ] If ieee80211_hw_restart() is called during authentication, the authentication process will continue, causing the driver to be called in a wrong state. This ultimately causes an oops in the iwlwifi driver (at least). This fixes bugzilla 195299 partly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299 Signed-off-by: Luca Coelho <luciano.coelho(a)intel.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/mac80211/mlme.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4326,6 +4326,10 @@ static int ieee80211_prep_connection(str if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) return -EINVAL; + /* If a reconfig is happening, bail out */ + if (local->in_reconfig) + return -EBUSY; + if (assoc) { rcu_read_lock(); have_sta = sta_info_get(sdata, cbss->bssid); Patches currently in stable-queue which might be from luciano.coelho(a)intel.com are queue-4.4/mac80211-bail-out-from-prep_connection-if-a-reconfig-is-ongoing.patch

7 years, 2 months

1
0
0 0

Patch "lockd: fix lockd shutdown race" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled lockd: fix lockd shutdown race to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: lockd-fix-lockd-shutdown-race.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: "J. Bruce Fields" <bfields(a)redhat.com> Date: Tue, 28 Mar 2017 21:25:08 -0400 Subject: lockd: fix lockd shutdown race From: "J. Bruce Fields" <bfields(a)redhat.com> [ Upstream commit efda760fe95ea15291853c8fa9235c32d319cd98 ] As reported by David Jeffery: "a signal was sent to lockd while lockd was shutting down from a request to stop nfs. The signal causes lockd to call restart_grace() which puts the lockd_net structure on the grace list. If this signal is received at the wrong time, it will occur after lockd_down_net() has called locks_end_grace() but before lockd_down_net() stops the lockd thread. This leads to lockd putting the lockd_net structure back on the grace list, then exiting without anything removing it from the list." So, perform the final locks_end_grace() from the the lockd thread; this ensures it's serialized with respect to restart_grace(). Reported-by: David Jeffery <djeffery(a)redhat.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/lockd/svc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/fs/lockd/svc.c +++ b/fs/lockd/svc.c @@ -129,6 +129,8 @@ lockd(void *vrqstp) { int err = 0; struct svc_rqst *rqstp = vrqstp; + struct net *net = &init_net; + struct lockd_net *ln = net_generic(net, lockd_net_id); /* try_to_freeze() is called from svc_recv() */ set_freezable(); @@ -173,6 +175,8 @@ lockd(void *vrqstp) if (nlmsvc_ops) nlmsvc_invalidate_all(); nlm_shutdown_hosts(); + cancel_delayed_work_sync(&ln->grace_period_end); + locks_end_grace(&ln->lockd_manager); return 0; } @@ -267,8 +271,6 @@ static void lockd_down_net(struct svc_se if (ln->nlmsvc_users) { if (--ln->nlmsvc_users == 0) { nlm_shutdown_hosts_net(net); - cancel_delayed_work_sync(&ln->grace_period_end); - locks_end_grace(&ln->lockd_manager); svc_shutdown_net(serv, net); dprintk("lockd_down_net: per-net data destroyed; net=%p\n", net); } Patches currently in stable-queue which might be from bfields(a)redhat.com are queue-4.4/lockd-fix-lockd-shutdown-race.patch

7 years, 2 months

1
0
0 0

Patch "libceph: NULL deref on crush_decode() error path" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled libceph: NULL deref on crush_decode() error path to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: libceph-null-deref-on-crush_decode-error-path.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 23 May 2017 17:25:10 +0300 Subject: libceph: NULL deref on crush_decode() error path From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 293dffaad8d500e1a5336eeb90d544cf40d4fbd8 ] If there is not enough space then ceph_decode_32_safe() does a goto bad. We need to return an error code in that situation. The current code returns ERR_PTR(0) which is NULL. The callers are not expecting that and it results in a NULL dereference. Fixes: f24e9980eb86 ("ceph: OSD client") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Reviewed-by: Ilya Dryomov <idryomov(a)gmail.com> Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ceph/osdmap.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -295,6 +295,7 @@ static struct crush_map *crush_decode(vo u32 yes; struct crush_rule *r; + err = -EINVAL; ceph_decode_32_safe(p, end, yes, bad); if (!yes) { dout("crush_decode NO rule %d off %x %p to %p\n", Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/block-fix-an-error-code-in-add_partition.patch queue-4.4/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.4/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.4/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.4/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.4/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "leds: pca955x: Correct I2C Functionality" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled leds: pca955x: Correct I2C Functionality to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: leds-pca955x-correct-i2c-functionality.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Tin Huynh <tnhuynh(a)apm.com> Date: Mon, 22 May 2017 16:19:20 +0700 Subject: leds: pca955x: Correct I2C Functionality From: Tin Huynh <tnhuynh(a)apm.com> [ Upstream commit aace34c0bb8ea3c8bdcec865b6a4be4db0a68e33 ] The driver checks an incorrect flag of functionality of adapter. When a driver requires i2c_smbus_read_byte_data and i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA instead I2C_FUNC_I2C. This patch fixes the problem. Signed-off-by: Tin Huynh <tnhuynh(a)apm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/leds/leds-pca955x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -281,7 +281,7 @@ static int pca955x_probe(struct i2c_clie "slave address 0x%02x\n", id->name, chip->bits, client->addr); - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; if (pdata) { Patches currently in stable-queue which might be from tnhuynh(a)apm.com are queue-4.4/leds-pca955x-correct-i2c-functionality.patch

7 years, 2 months

1
0
0 0

Patch "l2tp: fix missing print session offset info" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled l2tp: fix missing print session offset info to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: l2tp-fix-missing-print-session-offset-info.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Hangbin Liu <liuhangbin(a)gmail.com> Date: Fri, 22 Dec 2017 15:10:17 +0100 Subject: l2tp: fix missing print session offset info From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit 820da5357572715c6235ba3b3daa2d5b43a1198f ] Report offset parameter in L2TP_CMD_SESSION_GET command if it has been configured by userspace Fixes: 309795f4bec ("l2tp: Add netlink control API for L2TP") Reported-by: Jianlin Shi <jishi(a)redhat.com> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/l2tp/l2tp_netlink.c | 2 ++ 1 file changed, 2 insertions(+) --- a/net/l2tp/l2tp_netlink.c +++ b/net/l2tp/l2tp_netlink.c @@ -732,6 +732,8 @@ static int l2tp_nl_session_send(struct s if ((session->ifname[0] && nla_put_string(skb, L2TP_ATTR_IFNAME, session->ifname)) || + (session->offset && + nla_put_u16(skb, L2TP_ATTR_OFFSET, session->offset)) || (session->cookie_len && nla_put(skb, L2TP_ATTR_COOKIE, session->cookie_len, &session->cookie[0])) || Patches currently in stable-queue which might be from liuhangbin(a)gmail.com are queue-4.4/l2tp-fix-missing-print-session-offset-info.patch

7 years, 2 months

1
0
0 0

Patch "KVM: SVM: do not zero out segment attributes if segment is unusable or not present" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: SVM: do not zero out segment attributes if segment is unusable or not present to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-svm-do-not-zero-out-segment-attributes-if-segment-is-unusable-or-not-present.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Roman Pen <roman.penyaev(a)profitbricks.com> Date: Thu, 1 Jun 2017 10:55:03 +0200 Subject: KVM: SVM: do not zero out segment attributes if segment is unusable or not present From: Roman Pen <roman.penyaev(a)profitbricks.com> [ Upstream commit d9c1b5431d5f0e07575db785a022bce91051ac1d ] This is a fix for the problem [1], where VMCB.CPL was set to 0 and interrupt was taken on userspace stack. The root cause lies in the specific AMD CPU behaviour which manifests itself as unusable segment attributes on SYSRET. The corresponding work around for the kernel is the following: 61f01dd941ba ("x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue") In other turn virtualization side treated unusable segment incorrectly and restored CPL from SS attributes, which were zeroed out few lines above. In current patch it is assured only that P bit is cleared in VMCB.save state and segment attributes are not zeroed out if segment is not presented or is unusable, therefore CPL can be safely restored from DPL field. This is only one part of the fix, since QEMU side should be fixed accordingly not to zero out attributes on its side. Corresponding patch will follow. [1] Message id: CAJrWOzD6Xq==b-zYCDdFLgSRMPM-NkNuTSDFEtX=7MreT45i7Q(a)mail.gmail.com Signed-off-by: Roman Pen <roman.penyaev(a)profitbricks.com> Signed-off-by: Mikhail Sennikovskii <mikhail.sennikovskii(a)profitbricks.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim KrÄmÃ¡Å™ <rkrcmar(a)redhat.com> Cc: kvm(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/svm.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1386,6 +1386,7 @@ static void svm_get_segment(struct kvm_v */ if (var->unusable) var->db = 0; + /* This is symmetric with svm_set_segment() */ var->dpl = to_svm(vcpu)->vmcb->save.cpl; break; } @@ -1531,18 +1532,14 @@ static void svm_set_segment(struct kvm_v s->base = var->base; s->limit = var->limit; s->selector = var->selector; - if (var->unusable) - s->attrib = 0; - else { - s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK); - s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT; - s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT; - s->attrib |= (var->present & 1) << SVM_SELECTOR_P_SHIFT; - s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT; - s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT; - s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT; - s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT; - } + s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK); + s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT; + s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT; + s->attrib |= ((var->present & 1) && !var->unusable) << SVM_SELECTOR_P_SHIFT; + s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT; + s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT; + s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT; + s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT; /* * This is always accurate, except if SYSRET returned to a segment @@ -1551,7 +1548,8 @@ static void svm_set_segment(struct kvm_v * would entail passing the CPL to userspace and back. */ if (seg == VCPU_SREG_SS) - svm->vmcb->save.cpl = (s->attrib >> SVM_SELECTOR_DPL_SHIFT) & 3; + /* This is symmetric with svm_get_segment() */ + svm->vmcb->save.cpl = (var->dpl & 3); mark_dirty(svm->vmcb, VMCB_SEG); } Patches currently in stable-queue which might be from roman.penyaev(a)profitbricks.com are queue-4.4/kvm-svm-do-not-zero-out-segment-attributes-if-segment-is-unusable-or-not-present.patch

7 years, 2 months

1
0
0 0

Patch "KVM: PPC: Book3S PR: Check copy_to/from_user return values" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: PPC: Book3S PR: Check copy_to/from_user return values to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-ppc-book3s-pr-check-copy_to-from_user-return-values.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Paul Mackerras <paulus(a)ozlabs.org> Date: Thu, 11 May 2017 11:33:30 +1000 Subject: KVM: PPC: Book3S PR: Check copy_to/from_user return values From: Paul Mackerras <paulus(a)ozlabs.org> [ Upstream commit 67325e988faea735d663799b6d152b5f4254093c ] The PR KVM implementation of the PAPR HPT hypercalls (H_ENTER etc.) access an image of the HPT in userspace memory using copy_from_user and copy_to_user. Recently, the declarations of those functions were annotated to indicate that the return value must be checked. Since this code doesn't currently check the return value, this causes compile warnings like the ones shown below, and since on PPC the default is to compile arch/powerpc with -Werror, this causes the build to fail. To fix this, we check the return values, and if non-zero, fail the hypercall being processed with a H_FUNCTION error return value. There is really no good error return value to use since PAPR didn't envisage the possibility that the hypervisor may not be able to access the guest's HPT, and H_FUNCTION (function not supported) seems as good as any. The typical compile warnings look like this: CC arch/powerpc/kvm/book3s_pr_papr.o /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c: In function ‘kvmppc_h_pr_enter’: /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:53:2: error: ignoring return value of ‘copy_from_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)); ^ /home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_pr_papr.c:74:2: error: ignoring return value of ‘copy_to_user’, declared with attribute warn_unused_result [-Werror=unused-result] copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE); ^ ... etc. Signed-off-by: Paul Mackerras <paulus(a)ozlabs.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kvm/book3s_pr_papr.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -50,7 +50,9 @@ static int kvmppc_h_pr_enter(struct kvm_ pteg_addr = get_pteg_addr(vcpu, pte_index); mutex_lock(&vcpu->kvm->arch.hpt_mutex); - copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)); + ret = H_FUNCTION; + if (copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg))) + goto done; hpte = pteg; ret = H_PTEG_FULL; @@ -71,7 +73,9 @@ static int kvmppc_h_pr_enter(struct kvm_ hpte[0] = cpu_to_be64(kvmppc_get_gpr(vcpu, 6)); hpte[1] = cpu_to_be64(kvmppc_get_gpr(vcpu, 7)); pteg_addr += i * HPTE_SIZE; - copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE); + ret = H_FUNCTION; + if (copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE)) + goto done; kvmppc_set_gpr(vcpu, 4, pte_index | i); ret = H_SUCCESS; @@ -93,7 +97,9 @@ static int kvmppc_h_pr_remove(struct kvm pteg = get_pteg_addr(vcpu, pte_index); mutex_lock(&vcpu->kvm->arch.hpt_mutex); - copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + ret = H_FUNCTION; + if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) + goto done; pte[0] = be64_to_cpu((__force __be64)pte[0]); pte[1] = be64_to_cpu((__force __be64)pte[1]); @@ -103,7 +109,9 @@ static int kvmppc_h_pr_remove(struct kvm ((flags & H_ANDCOND) && (pte[0] & avpn) != 0)) goto done; - copy_to_user((void __user *)pteg, &v, sizeof(v)); + ret = H_FUNCTION; + if (copy_to_user((void __user *)pteg, &v, sizeof(v))) + goto done; rb = compute_tlbie_rb(pte[0], pte[1], pte_index); vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false); @@ -171,7 +179,10 @@ static int kvmppc_h_pr_bulk_remove(struc } pteg = get_pteg_addr(vcpu, tsh & H_BULK_REMOVE_PTEX); - copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) { + ret = H_FUNCTION; + break; + } pte[0] = be64_to_cpu((__force __be64)pte[0]); pte[1] = be64_to_cpu((__force __be64)pte[1]); @@ -184,7 +195,10 @@ static int kvmppc_h_pr_bulk_remove(struc tsh |= H_BULK_REMOVE_NOT_FOUND; } else { /* Splat the pteg in (userland) hpt */ - copy_to_user((void __user *)pteg, &v, sizeof(v)); + if (copy_to_user((void __user *)pteg, &v, sizeof(v))) { + ret = H_FUNCTION; + break; + } rb = compute_tlbie_rb(pte[0], pte[1], tsh & H_BULK_REMOVE_PTEX); @@ -211,7 +225,9 @@ static int kvmppc_h_pr_protect(struct kv pteg = get_pteg_addr(vcpu, pte_index); mutex_lock(&vcpu->kvm->arch.hpt_mutex); - copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + ret = H_FUNCTION; + if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) + goto done; pte[0] = be64_to_cpu((__force __be64)pte[0]); pte[1] = be64_to_cpu((__force __be64)pte[1]); @@ -234,7 +250,9 @@ static int kvmppc_h_pr_protect(struct kv vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false); pte[0] = (__force u64)cpu_to_be64(pte[0]); pte[1] = (__force u64)cpu_to_be64(pte[1]); - copy_to_user((void __user *)pteg, pte, sizeof(pte)); + ret = H_FUNCTION; + if (copy_to_user((void __user *)pteg, pte, sizeof(pte))) + goto done; ret = H_SUCCESS; done: Patches currently in stable-queue which might be from paulus(a)ozlabs.org are queue-4.4/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.4/kvm-ppc-book3s-pr-check-copy_to-from_user-return-values.patch

7 years, 2 months

1
0
0 0

Patch "KVM: nVMX: Fix handling of lmsw instruction" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: nVMX: Fix handling of lmsw instruction to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-nvmx-fix-handling-of-lmsw-instruction.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: "Jan H. Schönherr" <jschoenh(a)amazon.de> Date: Sat, 20 May 2017 13:22:56 +0200 Subject: KVM: nVMX: Fix handling of lmsw instruction From: "Jan H. Schönherr" <jschoenh(a)amazon.de> [ Upstream commit e1d39b17e044e8ae819827810d87d809ba5f58c0 ] The decision whether or not to exit from L2 to L1 on an lmsw instruction is based on bogus values: instead of using the information encoded within the exit qualification, it uses the data also used for the mov-to-cr instruction, which boils down to using whatever is in %eax at that point. Use the correct values instead. Without this fix, an L1 may not get notified when a 32-bit Linux L2 switches its secondary CPUs to protected mode; the L1 is only notified on the next modification of CR0. This short time window poses a problem, when there is some other reason to exit to L1 in between. Then, L2 will be resumed in real mode and chaos ensues. Signed-off-by: Jan H. SchÃ¶nherr <jschoenh(a)amazon.de> Reviewed-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/vmx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7657,11 +7657,13 @@ static bool nested_vmx_exit_handled_cr(s { unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); int cr = exit_qualification & 15; - int reg = (exit_qualification >> 8) & 15; - unsigned long val = kvm_register_readl(vcpu, reg); + int reg; + unsigned long val; switch ((exit_qualification >> 4) & 3) { case 0: /* mov to cr */ + reg = (exit_qualification >> 8) & 15; + val = kvm_register_readl(vcpu, reg); switch (cr) { case 0: if (vmcs12->cr0_guest_host_mask & @@ -7716,6 +7718,7 @@ static bool nested_vmx_exit_handled_cr(s * lmsw can change bits 1..3 of cr0, and only set bit 0 of * cr0. Other attempted changes are ignored, with no exit. */ + val = (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f; if (vmcs12->cr0_guest_host_mask & 0xe & (val ^ vmcs12->cr0_read_shadow)) return true; Patches currently in stable-queue which might be from jschoenh(a)amazon.de are queue-4.4/kvm-nvmx-fix-handling-of-lmsw-instruction.patch

7 years, 2 months

1
0
0 0

Patch "ipv6: avoid dad-failures for addresses with NODAD" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipv6: avoid dad-failures for addresses with NODAD to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipv6-avoid-dad-failures-for-addresses-with-nodad.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Mahesh Bandewar <maheshb(a)google.com> Date: Fri, 12 May 2017 17:03:39 -0700 Subject: ipv6: avoid dad-failures for addresses with NODAD From: Mahesh Bandewar <maheshb(a)google.com> [ Upstream commit 66eb9f86e50547ec2a8ff7a75997066a74ef584b ] Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by: Mahesh Bandewar <maheshb(a)google.com> Acked-by: David Ahern <dsahern(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/addrconf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -957,7 +957,10 @@ ipv6_add_addr(struct inet6_dev *idev, co INIT_HLIST_NODE(&ifa->addr_lst); ifa->scope = scope; ifa->prefix_len = pfxlen; - ifa->flags = flags | IFA_F_TENTATIVE; + ifa->flags = flags; + /* No need to add the TENTATIVE flag for addresses with NODAD */ + if (!(flags & IFA_F_NODAD)) + ifa->flags |= IFA_F_TENTATIVE; ifa->valid_lft = valid_lft; ifa->prefered_lft = prefered_lft; ifa->cstamp = ifa->tstamp = jiffies; Patches currently in stable-queue which might be from maheshb(a)google.com are queue-4.4/bonding-don-t-update-slave-link-until-ready-to-commit.patch queue-4.4/ipv6-avoid-dad-failures-for-addresses-with-nodad.patch

7 years, 2 months

1
0
0 0

Patch "ipsec: check return value of skb_to_sgvec always" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipsec: check return value of skb_to_sgvec always to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipsec-check-return-value-of-skb_to_sgvec-always.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3f29770723fe498a5c5f57c3a31a996ebdde03e1 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:23 +0200 Subject: ipsec: check return value of skb_to_sgvec always From: Jason A. Donenfeld <Jason(a)zx2c4.com> commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 upstream. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: Steffen Klassert <steffen.klassert(a)secunet.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Signed-off-by: David S. Miller <davem(a)davemloft.net> [natechancellor: Adjusted context due to lack of fca11ebde3f0] Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ah4.c | 8 ++++++-- net/ipv4/esp4.c | 13 ++++++++----- net/ipv6/ah6.c | 8 ++++++-- net/ipv6/esp6.c | 12 ++++++++---- 4 files changed, 28 insertions(+), 13 deletions(-) --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -220,7 +220,9 @@ static int ah_output(struct xfrm_state * ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output.low); sg_init_table(sg, nfrags + sglists); - skb_to_sgvec_nomark(skb, sg, 0, skb->len); + err = skb_to_sgvec_nomark(skb, sg, 0, skb->len); + if (unlikely(err < 0)) + goto out_free; if (x->props.flags & XFRM_STATE_ESN) { /* Attach seqhi sg right after packet payload */ @@ -393,7 +395,9 @@ static int ah_input(struct xfrm_state *x skb_push(skb, ihl); sg_init_table(sg, nfrags + sglists); - skb_to_sgvec_nomark(skb, sg, 0, skb->len); + err = skb_to_sgvec_nomark(skb, sg, 0, skb->len); + if (unlikely(err < 0)) + goto out_free; if (x->props.flags & XFRM_STATE_ESN) { /* Attach seqhi sg right after packet payload */ --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -268,10 +268,11 @@ static int esp_output(struct xfrm_state esph->spi = x->id.spi; sg_init_table(sg, nfrags); - skb_to_sgvec(skb, sg, - (unsigned char *)esph - skb->data, - assoclen + ivlen + clen + alen); - + err = skb_to_sgvec(skb, sg, + (unsigned char *)esph - skb->data, + assoclen + ivlen + clen + alen); + if (unlikely(err < 0)) + goto error; aead_request_set_crypt(req, sg, sg, ivlen + clen, iv); aead_request_set_ad(req, assoclen); @@ -481,7 +482,9 @@ static int esp_input(struct xfrm_state * } sg_init_table(sg, nfrags); - skb_to_sgvec(skb, sg, 0, skb->len); + err = skb_to_sgvec(skb, sg, 0, skb->len); + if (unlikely(err < 0)) + goto out; aead_request_set_crypt(req, sg, sg, elen + ivlen, iv); aead_request_set_ad(req, assoclen); --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -423,7 +423,9 @@ static int ah6_output(struct xfrm_state ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output.low); sg_init_table(sg, nfrags + sglists); - skb_to_sgvec_nomark(skb, sg, 0, skb->len); + err = skb_to_sgvec_nomark(skb, sg, 0, skb->len); + if (unlikely(err < 0)) + goto out_free; if (x->props.flags & XFRM_STATE_ESN) { /* Attach seqhi sg right after packet payload */ @@ -603,7 +605,9 @@ static int ah6_input(struct xfrm_state * ip6h->hop_limit = 0; sg_init_table(sg, nfrags + sglists); - skb_to_sgvec_nomark(skb, sg, 0, skb->len); + err = skb_to_sgvec_nomark(skb, sg, 0, skb->len); + if (unlikely(err < 0)) + goto out_free; if (x->props.flags & XFRM_STATE_ESN) { /* Attach seqhi sg right after packet payload */ --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -248,9 +248,11 @@ static int esp6_output(struct xfrm_state esph->spi = x->id.spi; sg_init_table(sg, nfrags); - skb_to_sgvec(skb, sg, - (unsigned char *)esph - skb->data, - assoclen + ivlen + clen + alen); + err = skb_to_sgvec(skb, sg, + (unsigned char *)esph - skb->data, + assoclen + ivlen + clen + alen); + if (unlikely(err < 0)) + goto error; aead_request_set_crypt(req, sg, sg, ivlen + clen, iv); aead_request_set_ad(req, assoclen); @@ -423,7 +425,9 @@ static int esp6_input(struct xfrm_state } sg_init_table(sg, nfrags); - skb_to_sgvec(skb, sg, 0, skb->len); + ret = skb_to_sgvec(skb, sg, 0, skb->len); + if (unlikely(ret < 0)) + goto out; aead_request_set_crypt(req, sg, sg, elen + ivlen, iv); aead_request_set_ad(req, assoclen); Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-4.4/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.4/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.4/rxrpc-check-return-value-of-skb_to_sgvec-always.patch queue-4.4/virtio_net-check-return-value-of-skb_to_sgvec-always.patch queue-4.4/virtio_net-check-return-value-of-skb_to_sgvec-in-one-more-location.patch

7 years, 2 months

1
0
0 0

Patch "ipmi_ssif: unlock on allocation failure" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipmi_ssif: unlock on allocation failure to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipmi_ssif-unlock-on-allocation-failure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Fri, 5 May 2017 08:33:24 +0300 Subject: ipmi_ssif: unlock on allocation failure From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit cf9806f32ef63b745f2486e0dbb2ac21f4ca44f0 ] We should unlock and re-enable IRQs if this allocation fails. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF) ") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Corey Minyard <cminyard(a)mvista.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/ipmi/ipmi_ssif.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -409,6 +409,7 @@ static void start_event_fetch(struct ssi msg = ipmi_alloc_smi_msg(); if (!msg) { ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); return; } @@ -431,6 +432,7 @@ static void start_recv_msg_fetch(struct msg = ipmi_alloc_smi_msg(); if (!msg) { ssif_info->ssif_state = SSIF_NORMAL; + ipmi_ssif_unlock_cond(ssif_info, flags); return; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/block-fix-an-error-code-in-add_partition.patch queue-4.4/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.4/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.4/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.4/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.4/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "Input: elantech - force relative mode on a certain module" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elantech - force relative mode on a certain module to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elantech-force-relative-mode-on-a-certain-module.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: KT Liao <kt.liao(a)emc.com.tw> Date: Mon, 12 Dec 2016 11:03:42 -0800 Subject: Input: elantech - force relative mode on a certain module From: KT Liao <kt.liao(a)emc.com.tw> [ Upstream commit d899520b0431e70279bfb5066ecb6dc91d0b7072 ] One of Elan modules with sample version is 0x74 and hw_version is 0x03 has a bug in absolute mode implementation, so let it run in default PS/2 relative mode. Signed-off-by: KT Liao <kt.liao(a)emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elantech.c | 11 +++++++++++ 1 file changed, 11 insertions(+) --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1715,6 +1715,17 @@ int elantech_init(struct psmouse *psmous etd->samples[0], etd->samples[1], etd->samples[2]); } + if (etd->samples[1] == 0x74 && etd->hw_version == 0x03) { + /* + * This module has a bug which makes absolute mode + * unusable, so let's abort so we'll be using standard + * PS/2 protocol. + */ + psmouse_info(psmouse, + "absolute mode broken, forcing standard PS/2 protocol\n"); + goto init_fail; + } + if (elantech_set_absolute_mode(psmouse)) { psmouse_err(psmouse, "failed to put touchpad into absolute mode.\n"); Patches currently in stable-queue which might be from kt.liao(a)emc.com.tw are queue-4.4/input-elantech-force-relative-mode-on-a-certain-module.patch queue-4.4/input-elan_i2c-clear-int-before-resetting-controller.patch

7 years, 2 months

1
0
0 0

Patch "Input: elan_i2c - clear INT before resetting controller" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elan_i2c - clear INT before resetting controller to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elan_i2c-clear-int-before-resetting-controller.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: KT Liao <kt.liao(a)emc.com.tw> Date: Thu, 25 May 2017 10:06:21 -0700 Subject: Input: elan_i2c - clear INT before resetting controller From: KT Liao <kt.liao(a)emc.com.tw> [ Upstream commit 4b3c7dbbfff0673e8a89575414b864d8b001d3bb ] Some old touchpad FWs need to have interrupt cleared before issuing reset command after updating firmware. We clear interrupt by attempting to read full report from the controller, and discarding any data read. Signed-off-by: KT Liao <kt.liao(a)emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elan_i2c_i2c.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -557,7 +557,14 @@ static int elan_i2c_finish_fw_update(str long ret; int error; int len; - u8 buffer[ETP_I2C_INF_LENGTH]; + u8 buffer[ETP_I2C_REPORT_LEN]; + + len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_LEN); + if (len != ETP_I2C_REPORT_LEN) { + error = len < 0 ? len : -EIO; + dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n", + error, len); + } reinit_completion(completion); enable_irq(client->irq); Patches currently in stable-queue which might be from kt.liao(a)emc.com.tw are queue-4.4/input-elantech-force-relative-mode-on-a-certain-module.patch queue-4.4/input-elan_i2c-clear-int-before-resetting-controller.patch

7 years, 2 months

1
0
0 0

Patch "Input: elan_i2c - check if device is there before really probing" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: elan_i2c - check if device is there before really probing to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-elan_i2c-check-if-device-is-there-before-really-probing.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Date: Fri, 19 Dec 2014 12:57:49 -0800 Subject: Input: elan_i2c - check if device is there before really probing From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> [ Upstream commit c5928551fd41b2eecdad78fa2be2a4a13ed5fde9 ] Before trying to properly initialize the touchpad and generate bunch of errors, let's first see it there is anything at the given address. If we get error, fail silently with -ENXIO. Reviewed-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/elan_i2c_core.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1082,6 +1082,13 @@ static int elan_probe(struct i2c_client return error; } + /* Make sure there is something at this address */ + error = i2c_smbus_read_byte(client); + if (error < 0) { + dev_dbg(&client->dev, "nothing at this address: %d\n", error); + return -ENXIO; + } + /* Initialize the touchpad. */ error = elan_initialize(data); if (error) Patches currently in stable-queue which might be from dmitry.torokhov(a)gmail.com are queue-4.4/input-elantech-force-relative-mode-on-a-certain-module.patch queue-4.4/input-elan_i2c-check-if-device-is-there-before-really-probing.patch queue-4.4/input-elan_i2c-clear-int-before-resetting-controller.patch

7 years, 2 months

1
0
0 0

Patch "iio: magnetometer: st_magn_spi: fix spi_device_id table" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: magnetometer: st_magn_spi: fix spi_device_id table to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-magnetometer-st_magn_spi-fix-spi_device_id-table.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Lorenzo Bianconi <lorenzo.bianconi83(a)gmail.com> Date: Tue, 6 Jun 2017 22:51:24 +0200 Subject: iio: magnetometer: st_magn_spi: fix spi_device_id table From: Lorenzo Bianconi <lorenzo.bianconi83(a)gmail.com> [ Upstream commit c83761ff0aac954aa368c623bb0f0d1a3214e834 ] Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series does not support spi interface Fixes: 872e79add756 (iio: magn: Add STMicroelectronics magn driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi(a)st.com> Signed-off-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/magnetometer/st_magn_spi.c | 2 -- 1 file changed, 2 deletions(-) --- a/drivers/iio/magnetometer/st_magn_spi.c +++ b/drivers/iio/magnetometer/st_magn_spi.c @@ -48,8 +48,6 @@ static int st_magn_spi_remove(struct spi } static const struct spi_device_id st_magn_id_table[] = { - { LSM303DLHC_MAGN_DEV_NAME }, - { LSM303DLM_MAGN_DEV_NAME }, { LIS3MDL_MAGN_DEV_NAME }, { LSM303AGR_MAGN_DEV_NAME }, {}, Patches currently in stable-queue which might be from lorenzo.bianconi83(a)gmail.com are queue-4.4/iio-magnetometer-st_magn_spi-fix-spi_device_id-table.patch

7 years, 2 months

1
0
0 0

Patch "iio: hi8435: cleanup reset gpio" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: hi8435: cleanup reset gpio to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-hi8435-cleanup-reset-gpio.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> Date: Fri, 19 May 2017 17:48:02 +0300 Subject: iio: hi8435: cleanup reset gpio From: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> [ Upstream commit 61305664a542f874283f74bf0b27ddb31f5045d7 ] Reset GPIO is active low. Currently driver uses gpiod_set_value(1) to clean reset, which depends on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality. This fixes driver to use _raw version of gpiod_set_value() to enforce active-low semantics despite of what's written in device tree. Allowing device tree to override that only opens possibility for errors and does not add any value. Additionally, use _cansleep version to make things work with i2c-gpio and other sleeping gpio drivers. Signed-off-by: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/adc/hi8435.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) --- a/drivers/iio/adc/hi8435.c +++ b/drivers/iio/adc/hi8435.c @@ -453,13 +453,15 @@ static int hi8435_probe(struct spi_devic priv->spi = spi; reset_gpio = devm_gpiod_get(&spi->dev, NULL, GPIOD_OUT_LOW); - if (IS_ERR(reset_gpio)) { - /* chip s/w reset if h/w reset failed */ + if (!IS_ERR(reset_gpio)) { + /* need >=100ns low pulse to reset chip */ + gpiod_set_raw_value_cansleep(reset_gpio, 0); + udelay(1); + gpiod_set_raw_value_cansleep(reset_gpio, 1); + } else { + /* s/w reset chip if h/w reset is not available */ hi8435_writeb(priv, HI8435_CTRL_REG, HI8435_CTRL_SRST); hi8435_writeb(priv, HI8435_CTRL_REG, 0); - } else { - udelay(5); - gpiod_set_value(reset_gpio, 1); } spi_set_drvdata(spi, idev); Patches currently in stable-queue which might be from nikita.yoush(a)cogentembedded.com are queue-4.4/iio-hi8435-avoid-garbage-event-at-first-enable.patch queue-4.4/iio-hi8435-cleanup-reset-gpio.patch

7 years, 2 months

1
0
0 0

Patch "iio: hi8435: avoid garbage event at first enable" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: hi8435: avoid garbage event at first enable to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iio-hi8435-avoid-garbage-event-at-first-enable.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> Date: Fri, 19 May 2017 17:48:00 +0300 Subject: iio: hi8435: avoid garbage event at first enable From: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> [ Upstream commit ee19ac340c5fdfd89c6348be4563453c61ab54a9 ] Currently, driver generates events for channels if new reading differs from previous one. This "previous value" is initialized to zero, which results into event if value is constant-one. Fix that by initializing "previous value" by reading at event enable time. This provides reliable sequence for userspace: - enable event, - AFTER THAT read current value, - AFTER THAT each event will correspond to change. Signed-off-by: Nikita Yushchenko <nikita.yoush(a)cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iio/adc/hi8435.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) --- a/drivers/iio/adc/hi8435.c +++ b/drivers/iio/adc/hi8435.c @@ -121,10 +121,21 @@ static int hi8435_write_event_config(str enum iio_event_direction dir, int state) { struct hi8435_priv *priv = iio_priv(idev); + int ret; + u32 tmp; + + if (state) { + ret = hi8435_readl(priv, HI8435_SO31_0_REG, &tmp); + if (ret < 0) + return ret; + if (tmp & BIT(chan->channel)) + priv->event_prev_val |= BIT(chan->channel); + else + priv->event_prev_val &= ~BIT(chan->channel); - priv->event_scan_mask &= ~BIT(chan->channel); - if (state) priv->event_scan_mask |= BIT(chan->channel); + } else + priv->event_scan_mask &= ~BIT(chan->channel); return 0; } Patches currently in stable-queue which might be from nikita.yoush(a)cogentembedded.com are queue-4.4/iio-hi8435-avoid-garbage-event-at-first-enable.patch queue-4.4/iio-hi8435-cleanup-reset-gpio.patch

7 years, 2 months

1
0
0 0

Patch "IB/srpt: Fix abort handling" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/srpt: Fix abort handling to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-srpt-fix-abort-handling.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Bart Van Assche <bart.vanassche(a)sandisk.com> Date: Thu, 4 May 2017 15:50:53 -0700 Subject: IB/srpt: Fix abort handling From: Bart Van Assche <bart.vanassche(a)sandisk.com> [ Upstream commit 55d694275f41a1c0eef4ef49044ff29bc3999490 ] Let the target core check the CMD_T_ABORTED flag instead of the SRP target driver. Hence remove the transport_check_aborted_status() call. Since state == SRPT_STATE_CMD_RSP_SENT is something that really should not happen, do not try to recover if srpt_queue_response() is called for an I/O context that is in that state. This patch is a bug fix because the srpt_abort_cmd() call is misplaced - if that function is called from srpt_queue_response() it should either be called before the command state is changed or after the response has been sent. Signed-off-by: Bart Van Assche <bart.vanassche(a)sandisk.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Cc: Doug Ledford <dledford(a)redhat.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Andy Grover <agrover(a)redhat.com> Cc: David Disseldorp <ddiss(a)suse.de> Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2974,12 +2974,8 @@ static void srpt_queue_response(struct s } spin_unlock_irqrestore(&ioctx->spinlock, flags); - if (unlikely(transport_check_aborted_status(&ioctx->cmd, false) - || WARN_ON_ONCE(state == SRPT_STATE_CMD_RSP_SENT))) { - atomic_inc(&ch->req_lim_delta); - srpt_abort_cmd(ioctx); + if (unlikely(WARN_ON_ONCE(state == SRPT_STATE_CMD_RSP_SENT))) return; - } dir = ioctx->cmd.data_direction; Patches currently in stable-queue which might be from bart.vanassche(a)sandisk.com are queue-4.4/ib-srpt-fix-abort-handling.patch

7 years, 2 months

1
0
0 0

Patch "hwmon: (ina2xx) Make calibration register value fixed" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hwmon: (ina2xx) Make calibration register value fixed to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hwmon-ina2xx-make-calibration-register-value-fixed.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Maciej Purski <m.purski(a)samsung.com> Date: Wed, 22 Nov 2017 16:32:15 +0100 Subject: hwmon: (ina2xx) Make calibration register value fixed From: Maciej Purski <m.purski(a)samsung.com> [ Upstream commit 5d389b125186cf254ad5b8015763ac07c151aea4 ] Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) Signed-off-by: Maciej Purski <m.purski(a)samsung.com> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwmon/ina2xx.c | 87 ++++++++++++++++++++++++++++--------------------- 1 file changed, 50 insertions(+), 37 deletions(-) --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -94,18 +94,20 @@ enum ina2xx_ids { ina219, ina226 }; struct ina2xx_config { u16 config_default; - int calibration_factor; + int calibration_value; int registers; int shunt_div; int bus_voltage_shift; int bus_voltage_lsb; /* uV */ - int power_lsb; /* uW */ + int power_lsb_factor; }; struct ina2xx_data { const struct ina2xx_config *config; long rshunt; + long current_lsb_uA; + long power_lsb_uW; struct mutex config_lock; struct regmap *regmap; @@ -115,21 +117,21 @@ struct ina2xx_data { static const struct ina2xx_config ina2xx_config[] = { [ina219] = { .config_default = INA219_CONFIG_DEFAULT, - .calibration_factor = 40960000, + .calibration_value = 4096, .registers = INA219_REGISTERS, .shunt_div = 100, .bus_voltage_shift = 3, .bus_voltage_lsb = 4000, - .power_lsb = 20000, + .power_lsb_factor = 20, }, [ina226] = { .config_default = INA226_CONFIG_DEFAULT, - .calibration_factor = 5120000, + .calibration_value = 2048, .registers = INA226_REGISTERS, .shunt_div = 400, .bus_voltage_shift = 0, .bus_voltage_lsb = 1250, - .power_lsb = 25000, + .power_lsb_factor = 25, }, }; @@ -168,12 +170,16 @@ static u16 ina226_interval_to_reg(int in return INA226_SHIFT_AVG(avg_bits); } +/* + * Calibration register is set to the best value, which eliminates + * truncation errors on calculating current register in hardware. + * According to datasheet (eq. 3) the best values are 2048 for + * ina226 and 4096 for ina219. They are hardcoded as calibration_value. + */ static int ina2xx_calibrate(struct ina2xx_data *data) { - u16 val = DIV_ROUND_CLOSEST(data->config->calibration_factor, - data->rshunt); - - return regmap_write(data->regmap, INA2XX_CALIBRATION, val); + return regmap_write(data->regmap, INA2XX_CALIBRATION, + data->config->calibration_value); } /* @@ -186,10 +192,6 @@ static int ina2xx_init(struct ina2xx_dat if (ret < 0) return ret; - /* - * Set current LSB to 1mA, shunt is in uOhms - * (equation 13 in datasheet). - */ return ina2xx_calibrate(data); } @@ -267,15 +269,15 @@ static int ina2xx_get_value(struct ina2x val = DIV_ROUND_CLOSEST(val, 1000); break; case INA2XX_POWER: - val = regval * data->config->power_lsb; + val = regval * data->power_lsb_uW; break; case INA2XX_CURRENT: - /* signed register, LSB=1mA (selected), in mA */ - val = (s16)regval; + /* signed register, result in mA */ + val = regval * data->current_lsb_uA; + val = DIV_ROUND_CLOSEST(val, 1000); break; case INA2XX_CALIBRATION: - val = DIV_ROUND_CLOSEST(data->config->calibration_factor, - regval); + val = regval; break; default: /* programmer goofed */ @@ -303,9 +305,32 @@ static ssize_t ina2xx_show_value(struct ina2xx_get_value(data, attr->index, regval)); } -static ssize_t ina2xx_set_shunt(struct device *dev, - struct device_attribute *da, - const char *buf, size_t count) +/* + * In order to keep calibration register value fixed, the product + * of current_lsb and shunt_resistor should also be fixed and equal + * to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order + * to keep the scale. + */ +static int ina2xx_set_shunt(struct ina2xx_data *data, long val) +{ + unsigned int dividend = DIV_ROUND_CLOSEST(1000000000, + data->config->shunt_div); + if (val <= 0 || val > dividend) + return -EINVAL; + + mutex_lock(&data->config_lock); + data->rshunt = val; + data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val); + data->power_lsb_uW = data->config->power_lsb_factor * + data->current_lsb_uA; + mutex_unlock(&data->config_lock); + + return 0; +} + +static ssize_t ina2xx_store_shunt(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) { unsigned long val; int status; @@ -315,18 +340,9 @@ static ssize_t ina2xx_set_shunt(struct d if (status < 0) return status; - if (val == 0 || - /* Values greater than the calibration factor make no sense. */ - val > data->config->calibration_factor) - return -EINVAL; - - mutex_lock(&data->config_lock); - data->rshunt = val; - status = ina2xx_calibrate(data); - mutex_unlock(&data->config_lock); + status = ina2xx_set_shunt(data, val); if (status < 0) return status; - return count; } @@ -386,7 +402,7 @@ static SENSOR_DEVICE_ATTR(power1_input, /* shunt resistance */ static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR, - ina2xx_show_value, ina2xx_set_shunt, + ina2xx_show_value, ina2xx_store_shunt, INA2XX_CALIBRATION); /* update interval (ina226 only) */ @@ -441,10 +457,7 @@ static int ina2xx_probe(struct i2c_clien val = INA2XX_RSHUNT_DEFAULT; } - if (val <= 0 || val > data->config->calibration_factor) - return -ENODEV; - - data->rshunt = val; + ina2xx_set_shunt(data, val); ina2xx_regmap_config.max_register = data->config->registers; Patches currently in stable-queue which might be from m.purski(a)samsung.com are queue-4.4/hwmon-ina2xx-make-calibration-register-value-fixed.patch

7 years, 2 months

1
0
0 0

Patch "hdlcdrv: Fix divide by zero in hdlcdrv_ioctl" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hdlcdrv: Fix divide by zero in hdlcdrv_ioctl to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hdlcdrv-fix-divide-by-zero-in-hdlcdrv_ioctl.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Firo Yang <firogm(a)gmail.com> Date: Fri, 26 May 2017 22:37:38 +0800 Subject: hdlcdrv: Fix divide by zero in hdlcdrv_ioctl From: Firo Yang <firogm(a)gmail.com> [ Upstream commit fb3ce90b7d7761b6f7f28f0ff5c456ef6b5229a1 ] syszkaller fuzzer triggered a divide by zero, when set calibration through ioctl(). To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL. Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Firo Yang <firogm(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/hamradio/hdlcdrv.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/net/hamradio/hdlcdrv.c +++ b/drivers/net/hamradio/hdlcdrv.c @@ -574,6 +574,8 @@ static int hdlcdrv_ioctl(struct net_devi case HDLCDRVCTL_CALIBRATE: if(!capable(CAP_SYS_RAWIO)) return -EPERM; + if (s->par.bitrate <= 0) + return -EINVAL; if (bi.data.calibrate > INT_MAX / s->par.bitrate) return -EINVAL; s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16; Patches currently in stable-queue which might be from firogm(a)gmail.com are queue-4.4/hdlcdrv-fix-divide-by-zero-in-hdlcdrv_ioctl.patch

7 years, 2 months

1
0
0 0

Patch "gpio: label descriptors using the device name" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gpio: label descriptors using the device name to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gpio-label-descriptors-using-the-device-name.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Thu, 4 Jan 2018 22:31:11 +0100 Subject: gpio: label descriptors using the device name From: Linus Walleij <linus.walleij(a)linaro.org> [ Upstream commit 24e78079bf2250874e33da2e7cfbb6db72d3caf4 ] Some GPIO lines appear named "?" in the lsgpio dump due to their requesting drivers not passing a reasonable label. Most typically this happens if a device tree node just defines gpios = <...> and not foo-gpios = <...>, the former gets named "foo" and the latter gets named "?". However the struct device passed in is always valid so let's just label the GPIO with dev_name() on the device if no proper label was passed. Cc: Reported-by: Jason Kridner <jkridner(a)beagleboard.org> Reported-by: Jason Kridner <jkridner(a)beagleboard.org> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpio/gpiolib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2145,7 +2145,8 @@ struct gpio_desc *__must_check gpiod_get return desc; } - status = gpiod_request(desc, con_id); + /* If a connection label was passed use that, else use the device name as label */ + status = gpiod_request(desc, con_id ? con_id : dev_name(dev)); if (status < 0) return ERR_PTR(status); Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.4/gpio-label-descriptors-using-the-device-name.patch

7 years, 2 months

1
0
0 0

Patch "Fix serial console on SNI RM400 machines" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Fix serial console on SNI RM400 machines to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: fix-serial-console-on-sni-rm400-machines.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> Date: Wed, 31 May 2017 22:21:03 +0200 Subject: Fix serial console on SNI RM400 machines From: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> [ Upstream commit e279e6d98e0cf2c2fe008b3c29042b92f0e17b1d ] sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f7ab0 (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by: Russell King - ARM Linux <linux(a)armlinux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sccnxp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_ clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { - if (PTR_ERR(clk) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + ret = PTR_ERR(clk); + if (ret == -EPROBE_DEFER) goto err_out; - } + uartclk = 0; + } else { + clk_prepare_enable(clk); + uartclk = clk_get_rate(clk); + } + + if (!uartclk) { dev_notice(&pdev->dev, "Using default clock frequency\n"); uartclk = s->chip->freq_std; - } else - uartclk = clk_get_rate(clk); + } /* Check input frequency */ if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { Patches currently in stable-queue which might be from tsbogend(a)alpha.franken.de are queue-4.4/fix-serial-console-on-sni-rm400-machines.patch

7 years, 2 months

1
0
0 0

Patch "fix race in drivers/char/random.c:get_reg()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled fix race in drivers/char/random.c:get_reg() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: fix-race-in-drivers-char-random.c-get_reg.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Michael Schmitz <schmitzmic(a)gmail.com> Date: Sun, 30 Apr 2017 19:49:21 +1200 Subject: fix race in drivers/char/random.c:get_reg() From: Michael Schmitz <schmitzmic(a)gmail.com> [ Upstream commit 9dfa7bba35ac08a63565d58c454dccb7e1bb0a08 ] get_reg() can be reentered on architectures with prioritized interrupts (m68k in this case), causing f->reg_index to be incremented after the range check. Out of bounds memory access past the pt_regs struct results. This will go mostly undetected unless access is beyond end of memory. Prevent the race by disabling interrupts in get_reg(). Tested on m68k (Atari Falcon, and ARAnyM emulator). Kudos to Geert Uytterhoeven for helping to trace this race. Signed-off-by: Michael Schmitz <schmitzmic(a)gmail.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/random.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -886,12 +886,16 @@ static void add_interrupt_bench(cycles_t static __u32 get_reg(struct fast_pool *f, struct pt_regs *regs) { __u32 *ptr = (__u32 *) regs; + unsigned long flags; if (regs == NULL) return 0; + local_irq_save(flags); if (f->reg_idx >= sizeof(struct pt_regs) / sizeof(__u32)) f->reg_idx = 0; - return *(ptr + f->reg_idx++); + ptr += f->reg_idx++; + local_irq_restore(flags); + return *ptr; } void add_interrupt_randomness(int irq, int irq_flags) Patches currently in stable-queue which might be from schmitzmic(a)gmail.com are queue-4.4/fix-race-in-drivers-char-random.c-get_reg.patch

7 years, 2 months

1
0
0 0

Patch "Fix loop device flush before configure v3" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Fix loop device flush before configure v3 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: fix-loop-device-flush-before-configure-v3.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: James Wang <jnwang(a)suse.com> Date: Thu, 8 Jun 2017 14:52:51 +0800 Subject: Fix loop device flush before configure v3 From: James Wang <jnwang(a)suse.com> [ Upstream commit 6460495709aeb651896bc8e5c134b2e4ca7d34a8 ] While installing SLES-12 (based on v4.4), I found that the installer will stall for 60+ seconds during LVM disk scan. The root cause was determined to be the removal of a bound device check in loop_flush() by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq"). Restoring this check, examining ->lo_state as set by loop_set_fd() eliminates the bad behavior. Test method: modprobe loop max_loop=64 dd if=/dev/zero of=disk bs=512 count=200K for((i=0;i<4;i++))do losetup -f disk; done mkfs.ext4 -F /dev/loop0 for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done for f in `ls /dev/loop[0-9]*|sort`; do \ echo $f; dd if=$f of=/dev/null bs=512 count=1; \ done Test output: stock patched /dev/loop0 18.1217e-05 8.3842e-05 /dev/loop1 6.1114e-05 0.000147979 /dev/loop10 0.414701 0.000116564 /dev/loop11 0.7474 6.7942e-05 /dev/loop12 0.747986 8.9082e-05 /dev/loop13 0.746532 7.4799e-05 /dev/loop14 0.480041 9.3926e-05 /dev/loop15 1.26453 7.2522e-05 Note that from loop10 onward, the device is not mounted, yet the stock kernel consumes several orders of magnitude more wall time than it does for a mounted device. (Thanks for Mike Galbraith <efault(a)gmx.de>, give a changelog review.) Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: James Wang <jnwang(a)suse.com> Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq") Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/loop.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -623,6 +623,9 @@ static int loop_switch(struct loop_devic */ static int loop_flush(struct loop_device *lo) { + /* loop not yet configured, no running thread, nothing to flush */ + if (lo->lo_state != Lo_bound) + return 0; return loop_switch(lo, NULL); } Patches currently in stable-queue which might be from jnwang(a)suse.com are queue-4.4/fix-loop-device-flush-before-configure-v3.patch

7 years, 2 months

1
0
0 0

Patch "ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ext4-handle-the-rest-of-ext4_mb_load_buddy-enomem-errors.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru> Date: Sun, 21 May 2017 22:35:23 -0400 Subject: ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors From: Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru> [ Upstream commit 9651e6b2e20648d04d5e1fe6479a3056047e8781 ] I've got another report about breaking ext4 by ENOMEM error returned from ext4_mb_load_buddy() caused by memory shortage in memory cgroup. This time inside ext4_discard_preallocations(). This patch replaces ext4_error() with ext4_warning() where errors returned from ext4_mb_load_buddy() are not fatal and handled by caller: * ext4_mb_discard_group_preallocations() - called before generating ENOSPC, we'll try to discard other group or return ENOSPC into user-space. * ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl. Some callers cannot handle errors, thus __GFP_NOFAIL is used for them: * ext4_discard_preallocations() * ext4_mb_discard_lg_preallocations() Fixes: adb7ef600cc9 ("ext4: use __GFP_NOFAIL in ext4_free_blocks()") Signed-off-by: Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/ext4/mballoc.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3874,7 +3874,8 @@ ext4_mb_discard_group_preallocations(str err = ext4_mb_load_buddy(sb, group, &e4b); if (err) { - ext4_error(sb, "Error loading buddy information for %u", group); + ext4_warning(sb, "Error %d loading buddy information for %u", + err, group); put_bh(bitmap_bh); return 0; } @@ -4031,10 +4032,11 @@ repeat: BUG_ON(pa->pa_type != MB_INODE_PA); group = ext4_get_group_number(sb, pa->pa_pstart); - err = ext4_mb_load_buddy(sb, group, &e4b); + err = ext4_mb_load_buddy_gfp(sb, group, &e4b, + GFP_NOFS|__GFP_NOFAIL); if (err) { - ext4_error(sb, "Error loading buddy information for %u", - group); + ext4_error(sb, "Error %d loading buddy information for %u", + err, group); continue; } @@ -4290,11 +4292,14 @@ ext4_mb_discard_lg_preallocations(struct spin_unlock(&lg->lg_prealloc_lock); list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) { + int err; group = ext4_get_group_number(sb, pa->pa_pstart); - if (ext4_mb_load_buddy(sb, group, &e4b)) { - ext4_error(sb, "Error loading buddy information for %u", - group); + err = ext4_mb_load_buddy_gfp(sb, group, &e4b, + GFP_NOFS|__GFP_NOFAIL); + if (err) { + ext4_error(sb, "Error %d loading buddy information for %u", + err, group); continue; } ext4_lock_group(sb, group); @@ -5116,8 +5121,8 @@ ext4_trim_all_free(struct super_block *s ret = ext4_mb_load_buddy(sb, group, &e4b); if (ret) { - ext4_error(sb, "Error in loading buddy " - "information for %u", group); + ext4_warning(sb, "Error %d loading buddy information for %u", + ret, group); return ret; } bitmap = e4b.bd_bitmap; Patches currently in stable-queue which might be from khlebnikov(a)yandex-team.ru are queue-4.4/ext4-handle-the-rest-of-ext4_mb_load_buddy-enomem-errors.patch

7 years, 2 months

1
0
0 0

Patch "ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ext4-fix-off-by-one-on-max-nr_pages-in-ext4_find_unwritten_pgoff.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Eryu Guan <eguan(a)redhat.com> Date: Wed, 24 May 2017 18:02:20 -0400 Subject: ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() From: Eryu Guan <eguan(a)redhat.com> [ Upstream commit 624327f8794704c5066b11a52f9da6a09dce7f9a ] ext4_find_unwritten_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size ext4 on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/ext4/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is unconvered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by: Eryu Guan <eguan(a)redhat.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/ext4/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -460,7 +460,7 @@ static int ext4_find_unwritten_pgoff(str int i, num; unsigned long nr_pages; - num = min_t(pgoff_t, end - index, PAGEVEC_SIZE); + num = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1; nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index, (pgoff_t)num); if (nr_pages == 0) Patches currently in stable-queue which might be from eguan(a)redhat.com are queue-4.4/ext4-fix-off-by-one-on-max-nr_pages-in-ext4_find_unwritten_pgoff.patch

7 years, 2 months

1
0
0 0

Patch "EDAC, mv64x60: Fix an error handling path" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled EDAC, mv64x60: Fix an error handling path to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: edac-mv64x60-fix-an-error-handling-path.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sun, 7 Jan 2018 21:54:00 +0100 Subject: EDAC, mv64x60: Fix an error handling path From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Cc: linux-edac <linux-edac(a)vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.… Signed-off-by: Borislav Petkov <bp(a)suse.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/edac/mv64x60_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/edac/mv64x60_edac.c +++ b/drivers/edac/mv64x60_edac.c @@ -763,7 +763,7 @@ static int mv64x60_mc_err_probe(struct p /* Non-ECC RAM? */ printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__); res = -ENODEV; - goto err2; + goto err; } edac_dbg(3, "init mci\n"); Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.4/cpuidle-dt-add-missing-of_node_put.patch queue-4.4/edac-mv64x60-fix-an-error-handling-path.patch queue-4.4/smb2-fix-share-type-handling.patch queue-4.4/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

7 years, 2 months

1
0
0 0

Patch "e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: e1000e-undo-e1000e_pm_freeze-if-__e1000_shutdown-fails.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Chris Wilson <chris(a)chris-wilson.co.uk> Date: Wed, 31 May 2017 18:50:43 +0300 Subject: e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails From: Chris Wilson <chris(a)chris-wilson.co.uk> [ Upstream commit 833521ebc65b1c3092e5c0d8a97092f98eec595d ] An error during suspend (e100e_pm_suspend), [ 429.994338] ACPI : EC: event blocked [ 429.994633] e1000e: EEE TX LPI TIMER: 00000011 [ 430.955451] pci_pm_suspend(): e1000e_pm_suspend+0x0/0x30 [e1000e] returns -2 [ 430.955454] dpm_run_callback(): pci_pm_suspend+0x0/0x140 returns -2 [ 430.955458] PM: Device 0000:00:19.0 failed to suspend async: error -2 [ 430.955581] PM: Some devices failed to suspend, or early wake event detected [ 430.957709] ACPI : EC: event unblocked lead to complete failure: [ 432.585002] ------------[ cut here ]------------ [ 432.585013] WARNING: CPU: 3 PID: 8372 at kernel/irq/manage.c:1478 __free_irq+0x9f/0x280 [ 432.585015] Trying to free already-free IRQ 20 [ 432.585016] Modules linked in: cdc_ncm usbnet x86_pkg_temp_thermal intel_powerclamp coretemp mii crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep lpc_ich snd_hda_core snd_pcm mei_me mei sdhci_pci sdhci i915 mmc_core e1000e ptp pps_core prime_numbers [ 432.585042] CPU: 3 PID: 8372 Comm: kworker/u16:40 Tainted: G U 4.10.0-rc8-CI-Patchwork_3870+ #1 [ 432.585044] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012 [ 432.585050] Workqueue: events_unbound async_run_entry_fn [ 432.585051] Call Trace: [ 432.585058] dump_stack+0x67/0x92 [ 432.585062] __warn+0xc6/0xe0 [ 432.585065] warn_slowpath_fmt+0x4a/0x50 [ 432.585070] ? _raw_spin_lock_irqsave+0x49/0x60 [ 432.585072] __free_irq+0x9f/0x280 [ 432.585075] free_irq+0x34/0x80 [ 432.585089] e1000_free_irq+0x65/0x70 [e1000e] [ 432.585098] e1000e_pm_freeze+0x7a/0xb0 [e1000e] [ 432.585106] e1000e_pm_suspend+0x21/0x30 [e1000e] [ 432.585113] pci_pm_suspend+0x71/0x140 [ 432.585118] dpm_run_callback+0x6f/0x330 [ 432.585122] ? pci_pm_freeze+0xe0/0xe0 [ 432.585125] __device_suspend+0xea/0x330 [ 432.585128] async_suspend+0x1a/0x90 [ 432.585132] async_run_entry_fn+0x34/0x160 [ 432.585137] process_one_work+0x1f4/0x6d0 [ 432.585140] ? process_one_work+0x16e/0x6d0 [ 432.585143] worker_thread+0x49/0x4a0 [ 432.585145] kthread+0x107/0x140 [ 432.585148] ? process_one_work+0x6d0/0x6d0 [ 432.585150] ? kthread_create_on_node+0x40/0x40 [ 432.585154] ret_from_fork+0x2e/0x40 [ 432.585156] ---[ end trace 6712df7f8c4b9124 ]--- The unwind failures stems from commit 2800209994f8 ("e1000e: Refactor PM flows"), but it may be a later patch that introduced the non-recoverable behaviour. Fixes: 2800209994f8 ("e1000e: Refactor PM flows") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99847 Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Tested-by: Aaron Brown <aaron.f.brown(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/e1000e/netdev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6595,12 +6595,17 @@ static int e1000e_pm_thaw(struct device static int e1000e_pm_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); + int rc; e1000e_flush_lpic(pdev); e1000e_pm_freeze(dev); - return __e1000_shutdown(pdev, false); + rc = __e1000_shutdown(pdev, false); + if (rc) + e1000e_pm_thaw(dev); + + return rc; } static int e1000e_pm_resume(struct device *dev) Patches currently in stable-queue which might be from chris(a)chris-wilson.co.uk are queue-4.4/e1000e-undo-e1000e_pm_freeze-if-__e1000_shutdown-fails.patch

7 years, 2 months

1
0
0 0

Patch "e1000e: fix race condition around skb_tstamp_tx()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled e1000e: fix race condition around skb_tstamp_tx() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: e1000e-fix-race-condition-around-skb_tstamp_tx.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jacob Keller <jacob.e.keller(a)intel.com> Date: Wed, 3 May 2017 10:28:50 -0700 Subject: e1000e: fix race condition around skb_tstamp_tx() From: Jacob Keller <jacob.e.keller(a)intel.com> [ Upstream commit 5012863b7347866764c4a4e58b62fb05346b0d06 ] The e1000e driver and related hardware has a limitation on Tx PTP packets which requires we limit to timestamping a single packet at once. We do this by verifying that we never request a new Tx timestamp while we still have a tx_hwtstamp_skb pointer. Unfortunately the driver suffers from a race condition around this. The tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx() is called. This function notifies the stack and applications of a new timestamp. Even a well behaved application that only sends a new request when the first one is finished might be woken up and possibly send a packet before we can free the timestamp in the driver again. The result is that we needlessly ignore some Tx timestamp requests in this corner case. Fix this by assigning the tx_hwtstamp_skb pointer prior to calling skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb until that function finishes. This ensures that the application is not woken up until the driver is ready to begin timestamping a new packet. This ensures that well behaved applications do not accidentally race with condition to skip Tx timestamps. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by: David Mirabito <davidm(a)metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller(a)intel.com> Tested-by: Aaron Brown <aaron.f.brown(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/e1000e/netdev.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1182,6 +1182,7 @@ static void e1000e_tx_hwtstamp_work(stru struct e1000_hw *hw = &adapter->hw; if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) { + struct sk_buff *skb = adapter->tx_hwtstamp_skb; struct skb_shared_hwtstamps shhwtstamps; u64 txstmp; @@ -1190,9 +1191,14 @@ static void e1000e_tx_hwtstamp_work(stru e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp); - skb_tstamp_tx(adapter->tx_hwtstamp_skb, &shhwtstamps); - dev_kfree_skb_any(adapter->tx_hwtstamp_skb); + /* Clear the global tx_hwtstamp_skb pointer and force writes + * prior to notifying the stack of a Tx timestamp. + */ adapter->tx_hwtstamp_skb = NULL; + wmb(); /* force write prior to skb_tstamp_tx */ + + skb_tstamp_tx(skb, &shhwtstamps); + dev_kfree_skb_any(skb); } else if (time_after(jiffies, adapter->tx_hwtstamp_start + adapter->tx_timeout_factor * HZ)) { dev_kfree_skb_any(adapter->tx_hwtstamp_skb); Patches currently in stable-queue which might be from jacob.e.keller(a)intel.com are queue-4.4/e1000e-fix-race-condition-around-skb_tstamp_tx.patch

7 years, 2 months

1
0
0 0

Patch "drm/omap: fix tiled buffer stride calculations" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/omap: fix tiled buffer stride calculations to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-omap-fix-tiled-buffer-stride-calculations.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Date: Thu, 18 May 2017 11:51:51 +0300 Subject: drm/omap: fix tiled buffer stride calculations From: Tomi Valkeinen <tomi.valkeinen(a)ti.com> [ Upstream commit cc8dd7661ccc2d8dc88921da8e6cc7c2fcdb0341 ] omap_gem uses page alignment for buffer stride. The related calculations are a bit off, though, as byte stride of 4096 gets aligned to 8192, instead of 4096. This patch changes the code to use DIV_ROUND_UP(), which fixes those calculations and makes them more readable. Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/omapdrm/omap_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/gpu/drm/omapdrm/omap_gem.c +++ b/drivers/gpu/drm/omapdrm/omap_gem.c @@ -158,7 +158,7 @@ static void evict_entry(struct drm_gem_o size_t size = PAGE_SIZE * n; loff_t off = mmap_offset(obj) + (entry->obj_pgoff << PAGE_SHIFT); - const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE); + const int m = DIV_ROUND_UP(omap_obj->width << fmt, PAGE_SIZE); if (m > 1) { int i; @@ -415,7 +415,7 @@ static int fault_2d(struct drm_gem_objec * into account in some of the math, so figure out virtual stride * in pages */ - const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE); + const int m = DIV_ROUND_UP(omap_obj->width << fmt, PAGE_SIZE); /* We don't use vmf->pgoff since that has the fake offset: */ pgoff = ((unsigned long)vmf->virtual_address - Patches currently in stable-queue which might be from tomi.valkeinen(a)ti.com are queue-4.4/drm-omap-fix-tiled-buffer-stride-calculations.patch

7 years, 2 months

1
0
0 0

Patch "drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Mon, 8 May 2017 15:55:14 -0700 Subject: drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 146180c052a00172f4dc08eaade836fd02f61fb5 ] The "DIV_ROUND_UP(size, PAGE_SIZE)" operation can overflow if "size" is more than ULLONG_MAX - PAGE_SIZE. Link: http://lkml.kernel.org/r/20170322111950.GA11279@mwanda Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Cc: Jorgen Hansen <jhansen(a)vmware.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/drivers/misc/vmw_vmci/vmci_queue_pair.c +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -298,8 +298,11 @@ static void *qp_alloc_queue(u64 size, u3 size_t pas_size; size_t vas_size; size_t queue_size = sizeof(*queue) + sizeof(*queue->kernel_if); - const u64 num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; + u64 num_pages; + if (size > SIZE_MAX - PAGE_SIZE) + return NULL; + num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; if (num_pages > (SIZE_MAX - queue_size) / (sizeof(*queue->kernel_if->u.g.pas) + @@ -624,9 +627,12 @@ static struct vmci_queue *qp_host_alloc_ { struct vmci_queue *queue; size_t queue_page_size; - const u64 num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; + u64 num_pages; const size_t queue_size = sizeof(*queue) + sizeof(*(queue->kernel_if)); + if (size > SIZE_MAX - PAGE_SIZE) + return NULL; + num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; if (num_pages > (SIZE_MAX - queue_size) / sizeof(*queue->kernel_if->u.h.page)) return NULL; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/block-fix-an-error-code-in-add_partition.patch queue-4.4/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.4/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.4/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.4/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.4/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "dmaengine: imx-sdma: Handle return value of clk_prepare_enable" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: imx-sdma: Handle return value of clk_prepare_enable to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-imx-sdma-handle-return-value-of-clk_prepare_enable.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Wed, 24 May 2017 12:09:53 +0530 Subject: dmaengine: imx-sdma: Handle return value of clk_prepare_enable From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> [ Upstream commit fb9caf370f4d0457789d13a1a1b110a8db846e5e ] clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/imx-sdma.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1722,17 +1722,24 @@ static int sdma_probe(struct platform_de if (IS_ERR(sdma->clk_ahb)) return PTR_ERR(sdma->clk_ahb); - clk_prepare(sdma->clk_ipg); - clk_prepare(sdma->clk_ahb); + ret = clk_prepare(sdma->clk_ipg); + if (ret) + return ret; + + ret = clk_prepare(sdma->clk_ahb); + if (ret) + goto err_clk; ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0, "sdma", sdma); if (ret) - return ret; + goto err_irq; sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); - if (!sdma->script_addrs) - return -ENOMEM; + if (!sdma->script_addrs) { + ret = -ENOMEM; + goto err_irq; + } /* initially no scripts available */ saddr_arr = (s32 *)sdma->script_addrs; @@ -1847,6 +1854,10 @@ err_register: dma_async_device_unregister(&sdma->dma_device); err_init: kfree(sdma->script_addrs); +err_irq: + clk_unprepare(sdma->clk_ahb); +err_clk: + clk_unprepare(sdma->clk_ipg); return ret; } @@ -1857,6 +1868,8 @@ static int sdma_remove(struct platform_d dma_async_device_unregister(&sdma->dma_device); kfree(sdma->script_addrs); + clk_unprepare(sdma->clk_ahb); + clk_unprepare(sdma->clk_ipg); /* Kill the tasklet */ for (i = 0; i < MAX_DMA_CHANNELS; i++) { struct sdma_channel *sdmac = &sdma->channel[i]; Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-4.4/dmaengine-imx-sdma-handle-return-value-of-clk_prepare_enable.patch

7 years, 2 months

1
0
0 0

Patch "cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Arjun Vynipadath <arjun(a)chelsio.com> Date: Wed, 10 Jan 2018 12:02:13 +0530 Subject: cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages From: Arjun Vynipadath <arjun(a)chelsio.com> [ Upstream commit ea0a42109aee7b92e631c4eb3f2219fadf58acdd ] We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom(a)chelsio.com> Signed-off-by: Arjun Vynipadath <arjun(a)chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr(a)chelsio.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -2604,8 +2604,8 @@ void t4vf_sge_stop(struct adapter *adapt int t4vf_sge_init(struct adapter *adapter) { struct sge_params *sge_params = &adapter->params.sge; - u32 fl0 = sge_params->sge_fl_buffer_size[0]; - u32 fl1 = sge_params->sge_fl_buffer_size[1]; + u32 fl_small_pg = sge_params->sge_fl_buffer_size[0]; + u32 fl_large_pg = sge_params->sge_fl_buffer_size[1]; struct sge *s = &adapter->sge; unsigned int ingpadboundary, ingpackboundary; @@ -2614,9 +2614,20 @@ int t4vf_sge_init(struct adapter *adapte * the Physical Function Driver. Ideally we should be able to deal * with _any_ configuration. Practice is different ... */ - if (fl0 != PAGE_SIZE || (fl1 != 0 && fl1 <= fl0)) { + + /* We only bother using the Large Page logic if the Large Page Buffer + * is larger than our Page Size Buffer. + */ + if (fl_large_pg <= fl_small_pg) + fl_large_pg = 0; + + /* The Page Size Buffer must be exactly equal to our Page Size and the + * Large Page Size Buffer should be 0 (per above) or a power of 2. + */ + if (fl_small_pg != PAGE_SIZE || + (fl_large_pg & (fl_large_pg - 1)) != 0) { dev_err(adapter->pdev_dev, "bad SGE FL buffer sizes [%d, %d]\n", - fl0, fl1); + fl_small_pg, fl_large_pg); return -EINVAL; } if ((sge_params->sge_control & RXPKTCPLMODE_F) == 0) { @@ -2627,8 +2638,8 @@ int t4vf_sge_init(struct adapter *adapte /* * Now translate the adapter parameters into our internal forms. */ - if (fl1) - s->fl_pg_order = ilog2(fl1) - PAGE_SHIFT; + if (fl_large_pg) + s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT; s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64); s->pktshift = PKTSHIFT_G(sge_params->sge_control); Patches currently in stable-queue which might be from arjun(a)chelsio.com are queue-4.4/cxgb4-fw-upgrade-fixes.patch queue-4.4/cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch

7 years, 2 months

1
0
0 0

Patch "cxgb4: FW upgrade fixes" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cxgb4: FW upgrade fixes to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cxgb4-fw-upgrade-fixes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Arjun Vynipadath <arjun(a)chelsio.com> Date: Tue, 30 May 2017 18:06:06 +0530 Subject: cxgb4: FW upgrade fixes From: Arjun Vynipadath <arjun(a)chelsio.com> [ Upstream commit 26747211486c5bc7dd014c3caab206576e00c0d0 ] Disable FW_OK flag while flashing Firmware. This will help to fix any potential mailbox timeouts during Firmware flash. Grab new devlog parameters after Firmware restart. When we FLASH new Firmware onto an adapter, the new Firmware may have the Firmware Device Log located at a different memory address or have a different size for it. Signed-off-by: Arjun Vynipadath <arjun(a)chelsio.com> Signed-off-by: Casey Leedom <leedom(a)chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr(a)chelsio.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -6076,13 +6076,18 @@ int t4_fw_upgrade(struct adapter *adap, if (!t4_fw_matches_chip(adap, fw_hdr)) return -EINVAL; + /* Disable FW_OK flag so that mbox commands with FW_OK flag set + * wont be sent when we are flashing FW. + */ + adap->flags &= ~FW_OK; + ret = t4_fw_halt(adap, mbox, force); if (ret < 0 && !force) - return ret; + goto out; ret = t4_load_fw(adap, fw_data, size); if (ret < 0) - return ret; + goto out; /* * Older versions of the firmware don't understand the new @@ -6093,7 +6098,17 @@ int t4_fw_upgrade(struct adapter *adap, * its header flags to see if it advertises the capability. */ reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0); - return t4_fw_restart(adap, mbox, reset); + ret = t4_fw_restart(adap, mbox, reset); + + /* Grab potentially new Firmware Device Log parameters so we can see + * how healthy the new Firmware is. It's okay to contact the new + * Firmware for these parameters even though, as far as it's + * concerned, we've never said "HELLO" to it ... + */ + (void)t4_init_devlog_params(adap); +out: + adap->flags |= FW_OK; + return ret; } /** Patches currently in stable-queue which might be from arjun(a)chelsio.com are queue-4.4/cxgb4-fw-upgrade-fixes.patch queue-4.4/cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch

7 years, 2 months

1
0
0 0

Patch "cxgb4: fix incorrect cim_la output for T6" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cxgb4: fix incorrect cim_la output for T6 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cxgb4-fix-incorrect-cim_la-output-for-t6.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ganesh Goudar <ganeshgr(a)chelsio.com> Date: Wed, 31 May 2017 19:10:21 +0530 Subject: cxgb4: fix incorrect cim_la output for T6 From: Ganesh Goudar <ganeshgr(a)chelsio.com> [ Upstream commit a97051f4553551d13e586ab3cb6ae13093a44a81 ] take care of UpDbgLaRdPtr[0-3] restriction for T6. Signed-off-by: Ganesh Goudar <ganeshgr(a)chelsio.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -7711,7 +7711,16 @@ int t4_cim_read_la(struct adapter *adap, ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]); if (ret) break; - idx = (idx + 1) & UPDBGLARDPTR_M; + + /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to + * identify the 32-bit portion of the full 312-bit data + */ + if (is_t6(adap->params.chip) && (idx & 0xf) >= 9) + idx = (idx & 0xff0) + 0x10; + else + idx++; + /* address can't exceed 0xfff */ + idx &= UPDBGLARDPTR_M; } restart: if (cfg & UPDBGLAEN_F) { Patches currently in stable-queue which might be from ganeshgr(a)chelsio.com are queue-4.4/cxgb4-fw-upgrade-fixes.patch queue-4.4/cxgb4-fix-incorrect-cim_la-output-for-t6.patch queue-4.4/cxgb4vf-fix-sge-fl-buffer-initialization-logic-for-64k-pages.patch

7 years, 2 months

1
0
0 0

Patch "[media] cx25840: fix unchecked return values" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] cx25840: fix unchecked return values to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cx25840-fix-unchecked-return-values.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 10:06:36 -0300 Subject: [media] cx25840: fix unchecked return values From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 35378ce143071c2a6bad4b59a000e9b9f8f6ea67 ] In functions cx25840_initialize(), cx231xx_initialize(), and cx23885_initialize(), the return value of create_singlethread_workqueue() is used without validation. This may result in NULL dereference and cause kernel crash. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/i2c/cx25840/cx25840-core.c | 36 ++++++++++++++++++------------- 1 file changed, 21 insertions(+), 15 deletions(-) --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -420,11 +420,13 @@ static void cx25840_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } /* 6. */ cx25840_write(client, 0x115, 0x8c); @@ -631,11 +633,13 @@ static void cx23885_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } /* Call the cx23888 specific std setup func, we no longer rely on * the generic cx24840 func. @@ -746,11 +750,13 @@ static void cx231xx_initialize(struct i2 INIT_WORK(&state->fw_work, cx25840_work_handler); init_waitqueue_head(&state->fw_wait); q = create_singlethread_workqueue("cx25840_fw"); - prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); - queue_work(q, &state->fw_work); - schedule(); - finish_wait(&state->fw_wait, &wait); - destroy_workqueue(q); + if (q) { + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + } cx25840_std_setup(client); Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.4/cx25840-fix-unchecked-return-values.patch queue-4.4/usb-dwc3-keystone-check-return-value.patch queue-4.4/rtc-snvs-fix-an-incorrect-check-of-return-value.patch

7 years, 2 months

1
0
0 0

Patch "cpuidle: dt: Add missing 'of_node_put()'" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpuidle: dt: Add missing 'of_node_put()' to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpuidle-dt-add-missing-of_node_put.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> Date: Sun, 11 Jun 2017 14:28:54 +0200 Subject: cpuidle: dt: Add missing 'of_node_put()' From: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> [ Upstream commit b2cdd8e1b54849477a32d820acc2e87828a38f3d ] 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da074fd (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by: Christophe Jaillet <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpuidle/dt_idle_states.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -174,8 +174,10 @@ int dt_init_idle_driver(struct cpuidle_d if (!state_node) break; - if (!of_device_is_available(state_node)) + if (!of_device_is_available(state_node)) { + of_node_put(state_node); continue; + } if (!idle_state_valid(state_node, i, cpumask)) { pr_warn("%s idle state not valid, bailing out\n", Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.4/cpuidle-dt-add-missing-of_node_put.patch queue-4.4/edac-mv64x60-fix-an-error-handling-path.patch queue-4.4/smb2-fix-share-type-handling.patch queue-4.4/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

7 years, 2 months

1
0
0 0

Patch "clk: scpi: fix return type of __scpi_dvfs_round_rate" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: scpi: fix return type of __scpi_dvfs_round_rate to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-scpi-fix-return-type-of-__scpi_dvfs_round_rate.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Sudeep Holla <sudeep.holla(a)arm.com> Date: Thu, 18 May 2017 17:19:28 +0100 Subject: clk: scpi: fix return type of __scpi_dvfs_round_rate From: Sudeep Holla <sudeep.holla(a)arm.com> [ Upstream commit 7374aec95636ca39409545eba4ef5ff3125c2346 ] The frequencies above the maximum value of signed integer(i.e. 2^31 -1) will overflow with the current code. This patch fixes the return type of __scpi_dvfs_round_rate from 'int' to 'unsigned long'. Fixes: cd52c2a4b5c4 ("clk: add support for clocks provided by SCP(System Control Processor)") Cc: Michael Turquette <mturquette(a)baylibre.com> Cc: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla(a)arm.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-scpi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/clk/clk-scpi.c +++ b/drivers/clk/clk-scpi.c @@ -71,15 +71,15 @@ static const struct clk_ops scpi_clk_ops }; /* find closest match to given frequency in OPP table */ -static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) +static long __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) { int idx; - u32 fmin = 0, fmax = ~0, ftmp; + unsigned long fmin = 0, fmax = ~0, ftmp; const struct scpi_opp *opp = clk->info->opps; for (idx = 0; idx < clk->info->count; idx++, opp++) { ftmp = opp->freq; - if (ftmp >= (u32)rate) { + if (ftmp >= rate) { if (ftmp <= fmax) fmax = ftmp; break; Patches currently in stable-queue which might be from sudeep.holla(a)arm.com are queue-4.4/clk-scpi-fix-return-type-of-__scpi_dvfs_round_rate.patch

7 years, 2 months

1
0
0 0

Patch "clk: Fix __set_clk_rates error print-string" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: Fix __set_clk_rates error print-string to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-fix-__set_clk_rates-error-print-string.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Date: Mon, 15 May 2017 11:58:59 +0100 Subject: clk: Fix __set_clk_rates error print-string From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> [ Upstream commit ee177c5d6369f8e5d3e4793dce501cf4431313a1 ] When failing to set a clock the printout emitted is incorrect. "u32 rate" is formatted as %d and should be %u whereas "unsigned long clk_set_rate()" is formatted as %ld and should be %lu as per Documentation/printk-formats.txt. Fixes: 2885c3b2a3da ("clk: Show correct information when fail to set clock rate") Signed-off-by: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/clk-conf.c +++ b/drivers/clk/clk-conf.c @@ -106,7 +106,7 @@ static int __set_clk_rates(struct device rc = clk_set_rate(clk, rate); if (rc < 0) - pr_err("clk: couldn't set %s clk rate to %d (%d), current rate: %ld\n", + pr_err("clk: couldn't set %s clk rate to %u (%d), current rate: %lu\n", __clk_get_name(clk), rate, rc, clk_get_rate(clk)); clk_put(clk); Patches currently in stable-queue which might be from pure.logic(a)nexus-software.ie are queue-4.4/clk-fix-__set_clk_rates-error-print-string.patch

7 years, 2 months

1
0
0 0

Patch "CIFS: silence lockdep splat in cifs_relock_file()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled CIFS: silence lockdep splat in cifs_relock_file() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cifs-silence-lockdep-splat-in-cifs_relock_file.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Rabin Vincent <rabinv(a)axis.com> Date: Wed, 3 May 2017 17:17:21 +0200 Subject: CIFS: silence lockdep splat in cifs_relock_file() From: Rabin Vincent <rabinv(a)axis.com> [ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ] cifs_relock_file() can perform a down_write() on the inode's lock_sem even though it was already performed in cifs_strict_readv(). Lockdep complains about this. AFAICS, there is no problem here, and lockdep just needs to be told that this nesting is OK. ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #20 Not tainted --------------------------------------------- cat/701 is trying to acquire lock: (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00 but task is already holding lock: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&cifsi->lock_sem); lock(&cifsi->lock_sem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by cat/701: #0: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 stack backtrace: CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20 Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? trace_hardirqs_on_thunk+0x1a/0x1c ? preempt_schedule_irq+0x6b/0x80 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? cifs_reopen_file+0x7a7/0xc00 down_read+0x2d/0x70 ? cifs_reopen_file+0x7a7/0xc00 cifs_reopen_file+0x7a7/0xc00 ? printk+0x43/0x4b cifs_readpage_worker+0x327/0x8a0 cifs_readpage+0x8c/0x2a0 generic_file_read_iter+0x692/0xd00 cifs_strict_readv+0x29f/0x310 generic_file_splice_read+0x11c/0x1c0 do_splice_to+0xa5/0xc0 splice_direct_to_actor+0xfa/0x350 ? generic_pipe_buf_nosteal+0x10/0x10 do_splice_direct+0xb5/0xe0 do_sendfile+0x278/0x3a0 SyS_sendfile64+0xc4/0xe0 entry_SYSCALL_64_fastpath+0x1f/0xbe Signed-off-by: Rabin Vincent <rabinv(a)axis.com> Acked-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -589,7 +589,7 @@ cifs_relock_file(struct cifsFileInfo *cf struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); int rc = 0; - down_read(&cinode->lock_sem); + down_read_nested(&cinode->lock_sem, SINGLE_DEPTH_NESTING); if (cinode->can_cache_brlcks) { /* can cache locks - no need to relock */ up_read(&cinode->lock_sem); Patches currently in stable-queue which might be from rabinv(a)axis.com are queue-4.4/cifs-silence-lockdep-splat-in-cifs_relock_file.patch

7 years, 2 months

1
0
0 0

Patch "cfg80211: make RATE_INFO_BW_20 the default" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cfg80211: make RATE_INFO_BW_20 the default to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cfg80211-make-rate_info_bw_20-the-default.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Johannes Berg <johannes.berg(a)intel.com> Date: Thu, 4 May 2017 08:42:30 +0200 Subject: cfg80211: make RATE_INFO_BW_20 the default From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ] Due to the way I did the RX bitrate conversions in mac80211 with spatch, going setting flags to setting the value, many drivers now don't set the bandwidth value for 20 MHz, since with the flags it wasn't necessary to (there was no 20 MHz flag, only the others.) Rather than go through and try to fix up all the drivers, instead renumber the enum so that 20 MHz, which is the typical bandwidth, actually has the value 0, making those drivers all work again. If VHT was hit used with a driver not reporting it, e.g. iwlmvm, this manifested in hitting the bandwidth warning in cfg80211_calculate_bitrate_vht(). Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org> Tested-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -933,9 +933,9 @@ enum rate_info_flags { * @RATE_INFO_BW_160: 160 MHz bandwidth */ enum rate_info_bw { + RATE_INFO_BW_20 = 0, RATE_INFO_BW_5, RATE_INFO_BW_10, - RATE_INFO_BW_20, RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, Patches currently in stable-queue which might be from johannes.berg(a)intel.com are queue-4.4/cfg80211-make-rate_info_bw_20-the-default.patch queue-4.4/mac80211-bail-out-from-prep_connection-if-a-reconfig-is-ongoing.patch

7 years, 2 months

1
0
0 0

Patch "bus: brcmstb_gisb: Use register offsets with writes too" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: Use register offsets with writes too to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:09 -0700 Subject: bus: brcmstb_gisb: Use register offsets with writes too From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 856c7ccb9ce7a061f04bdf586f649cb93654e294 ] This commit corrects the bug introduced in commit f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -123,9 +123,9 @@ static void gisb_write(struct brcmstb_gi return; if (gdev->big_endian) - iowrite32be(val, gdev->base + reg); + iowrite32be(val, gdev->base + offset); else - iowrite32(val, gdev->base + reg); + iowrite32(val, gdev->base + offset); } static ssize_t gisb_arb_get_timeout(struct device *dev, Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.4/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.4/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

7 years, 2 months

1
0
0 0

Patch "bus: brcmstb_gisb: correct support for 64-bit address output" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: correct support for 64-bit address output to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:10 -0700 Subject: bus: brcmstb_gisb: correct support for 64-bit address output From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ] The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -33,8 +33,6 @@ #define ARB_ERR_CAP_CLEAR (1 << 0) #define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) #define ARB_ERR_CAP_STATUS_TEA (1 << 11) -#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2) -#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c #define ARB_ERR_CAP_STATUS_WRITE (1 << 1) #define ARB_ERR_CAP_STATUS_VALID (1 << 0) @@ -43,7 +41,6 @@ enum { ARB_ERR_CAP_CLR, ARB_ERR_CAP_HI_ADDR, ARB_ERR_CAP_ADDR, - ARB_ERR_CAP_DATA, ARB_ERR_CAP_STATUS, ARB_ERR_CAP_MASTER, }; @@ -53,7 +50,6 @@ static const int gisb_offsets_bcm7038[] [ARB_ERR_CAP_CLR] = 0x0c4, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0c8, - [ARB_ERR_CAP_DATA] = 0x0cc, [ARB_ERR_CAP_STATUS] = 0x0d0, [ARB_ERR_CAP_MASTER] = -1, }; @@ -63,7 +59,6 @@ static const int gisb_offsets_bcm7400[] [ARB_ERR_CAP_CLR] = 0x0c8, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0cc, - [ARB_ERR_CAP_DATA] = 0x0d0, [ARB_ERR_CAP_STATUS] = 0x0d4, [ARB_ERR_CAP_MASTER] = 0x0d8, }; @@ -73,7 +68,6 @@ static const int gisb_offsets_bcm7435[] [ARB_ERR_CAP_CLR] = 0x168, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x16c, - [ARB_ERR_CAP_DATA] = 0x170, [ARB_ERR_CAP_STATUS] = 0x174, [ARB_ERR_CAP_MASTER] = 0x178, }; @@ -83,7 +77,6 @@ static const int gisb_offsets_bcm7445[] [ARB_ERR_CAP_CLR] = 0x7e4, [ARB_ERR_CAP_HI_ADDR] = 0x7e8, [ARB_ERR_CAP_ADDR] = 0x7ec, - [ARB_ERR_CAP_DATA] = 0x7f0, [ARB_ERR_CAP_STATUS] = 0x7f4, [ARB_ERR_CAP_MASTER] = 0x7f8, }; @@ -105,9 +98,13 @@ static u32 gisb_read(struct brcmstb_gisb { int offset = gdev->gisb_offsets[reg]; - /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ - if (offset == -1) - return 1; + if (offset < 0) { + /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ + if (reg == ARB_ERR_CAP_MASTER) + return 1; + else + return 0; + } if (gdev->big_endian) return ioread32be(gdev->base + offset); @@ -115,6 +112,16 @@ static u32 gisb_read(struct brcmstb_gisb return ioread32(gdev->base + offset); } +static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev) +{ + u64 value; + + value = gisb_read(gdev, ARB_ERR_CAP_ADDR); + value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; + + return value; +} + static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg) { int offset = gdev->gisb_offsets[reg]; @@ -181,7 +188,7 @@ static int brcmstb_gisb_arb_decode_addr( const char *reason) { u32 cap_status; - unsigned long arb_addr; + u64 arb_addr; u32 master; const char *m_name; char m_fmt[11]; @@ -193,10 +200,7 @@ static int brcmstb_gisb_arb_decode_addr( return 1; /* Read the address and master */ - arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff; -#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT)) - arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; -#endif + arb_addr = gisb_read_address(gdev); master = gisb_read(gdev, ARB_ERR_CAP_MASTER); m_name = brcmstb_gisb_master_to_str(gdev, master); @@ -205,7 +209,7 @@ static int brcmstb_gisb_arb_decode_addr( m_name = m_fmt; } - pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n", + pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n", __func__, reason, arb_addr, cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R', cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "", Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.4/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.4/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

7 years, 2 months

1
0
0 0

Patch "btrfs: fix incorrect error return ret being passed to mapping_set_error" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled btrfs: fix incorrect error return ret being passed to mapping_set_error to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 9 May 2017 18:14:01 +0100 Subject: btrfs: fix incorrect error return ret being passed to mapping_set_error From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit bff5baf8aa37a97293725a16c03f49872249c07e ] The setting of return code ret should be based on the error code passed into function end_extent_writepage and not on ret. Thanks to Liu Bo for spotting this mistake in the original fix I submitted. Detected by CoverityScan, CID#1414312 ("Logically dead code") Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2534,7 +2534,7 @@ int end_extent_writepage(struct page *pa if (!uptodate) { ClearPageUptodate(page); SetPageError(page); - ret = ret < 0 ? ret : -EIO; + ret = err < 0 ? err : -EIO; mapping_set_error(page->mapping, ret); } return 0; Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.4/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.4/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.4/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.4/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

7 years, 2 months

1
0
0 0

Patch "bonding: Don't update slave->link until ready to commit" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: Don't update slave->link until ready to commit to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-don-t-update-slave-link-until-ready-to-commit.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Nithin Sujir <nsujir(a)tintri.com> Date: Wed, 24 May 2017 19:45:17 -0700 Subject: bonding: Don't update slave->link until ready to commit From: Nithin Sujir <nsujir(a)tintri.com> [ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ] In the loadbalance arp monitoring scheme, when a slave link change is detected, the slave->link is immediately updated and slave_state_changed is set. Later down the function, the rtnl_lock is acquired and the changes are committed, updating the bond link state. However, the acquisition of the rtnl_lock can fail. The next time the monitor runs, since slave->link is already updated, it determines that link is unchanged. This results in the bond link state permanently out of sync with the slave link. This patch modifies bond_loadbalance_arp_mon() to handle link changes identical to bond_ab_arp_{inspect/commit}(). The new link state is maintained in slave->new_link until we're ready to commit at which point it's copied into slave->link. NOTE: miimon_{inspect/commit}() has a more complex state machine requiring the use of the bond_{propose,commit}_link_state() functions which maintains the intermediate state in slave->link_new_state. The arp monitors don't require that. Testing: This bug is very easy to reproduce with the following steps. 1. In a loop, toggle a slave link of a bond slave interface. 2. In a separate loop, do ifconfig up/down of an unrelated interface to create contention for rtnl_lock. Within a few iterations, the bond link goes out of sync with the slave link. Signed-off-by: Nithin Nayak Sujir <nsujir(a)tintri.com> Cc: Mahesh Bandewar <maheshb(a)google.com> Cc: Jay Vosburgh <jay.vosburgh(a)canonical.com> Acked-by: Mahesh Bandewar <maheshb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2555,11 +2555,13 @@ static void bond_loadbalance_arp_mon(str bond_for_each_slave_rcu(bond, slave, iter) { unsigned long trans_start = dev_trans_start(slave->dev); + slave->new_link = BOND_LINK_NOCHANGE; + if (slave->link != BOND_LINK_UP) { if (bond_time_in_interval(bond, trans_start, 1) && bond_time_in_interval(bond, slave->last_rx, 1)) { - slave->link = BOND_LINK_UP; + slave->new_link = BOND_LINK_UP; slave_state_changed = 1; /* primary_slave has no meaning in round-robin @@ -2586,7 +2588,7 @@ static void bond_loadbalance_arp_mon(str if (!bond_time_in_interval(bond, trans_start, 2) || !bond_time_in_interval(bond, slave->last_rx, 2)) { - slave->link = BOND_LINK_DOWN; + slave->new_link = BOND_LINK_DOWN; slave_state_changed = 1; if (slave->link_failure_count < UINT_MAX) @@ -2617,6 +2619,11 @@ static void bond_loadbalance_arp_mon(str if (!rtnl_trylock()) goto re_arm; + bond_for_each_slave(bond, slave, iter) { + if (slave->new_link != BOND_LINK_NOCHANGE) + slave->link = slave->new_link; + } + if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) Patches currently in stable-queue which might be from nsujir(a)tintri.com are queue-4.4/bonding-don-t-update-slave-link-until-ready-to-commit.patch

7 years, 2 months

1
0
0 0

Patch "bnx2x: Allow vfs to disable txvlan offload" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Allow vfs to disable txvlan offload to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-allow-vfs-to-disable-txvlan-offload.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> Date: Fri, 9 Jun 2017 17:17:01 +0300 Subject: bnx2x: Allow vfs to disable txvlan offload From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> [ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3943,15 +3943,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ + u16 vlan_tci = 0; #ifndef BNX2X_STOP_ON_ERROR - if (IS_VF(bp)) + if (IS_VF(bp)) { #endif - tx_start_bd->vlan_or_ethertype = - cpu_to_le16(ntohs(eth->h_proto)); + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } #ifndef BNX2X_STOP_ON_ERROR - else + } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } #endif } Patches currently in stable-queue which might be from Yuval.Mintz(a)cavium.com are queue-4.4/bnx2x-allow-vfs-to-disable-txvlan-offload.patch

7 years, 2 months

1
0
0 0

Patch "bna: Avoid reading past end of buffer" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bna: Avoid reading past end of buffer to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bna-avoid-reading-past-end-of-buffer.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 15:25:32 -0700 Subject: bna: Avoid reading past end of buffer From: Kees Cook <keescook(a)chromium.org> [ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay(a)gmail.com> Signed-off-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -2845,7 +2845,7 @@ bfa_ioc_get_adapter_optrom_ver(struct bf static void bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc, char *manufacturer) { - memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); + strncpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); } static void Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.4/qlge-avoid-reading-past-end-of-buffer.patch queue-4.4/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.4/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.4/bna-avoid-reading-past-end-of-buffer.patch

7 years, 2 months

1
0
0 0

Patch "Bluetooth: Send HCI Set Event Mask Page 2 command only when needed" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: Send HCI Set Event Mask Page 2 command only when needed to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcel Holtmann <marcel(a)holtmann.org> Date: Fri, 9 Jun 2017 18:43:56 +0200 Subject: Bluetooth: Send HCI Set Event Mask Page 2 command only when needed From: Marcel Holtmann <marcel(a)holtmann.org> [ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Reported-by: Sedat Dilek <sedat.dilek(a)gmail.com> Tested-by: Sedat Dilek <sedat.dilek(a)gmail.com> Signed-off-by: Szymon Janc <szymon.janc(a)codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/hci_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -716,6 +716,7 @@ static void hci_set_event_mask_page_2(st { struct hci_dev *hdev = req->hdev; u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; /* If Connectionless Slave Broadcast master role is supported * enable all necessary events for it. @@ -725,6 +726,7 @@ static void hci_set_event_mask_page_2(st events[1] |= 0x80; /* Synchronization Train Complete */ events[2] |= 0x10; /* Slave Page Response Timeout */ events[2] |= 0x20; /* CSB Channel Map Change */ + changed = true; } /* If Connectionless Slave Broadcast slave role is supported @@ -735,13 +737,24 @@ static void hci_set_event_mask_page_2(st events[2] |= 0x02; /* CSB Receive */ events[2] |= 0x04; /* CSB Timeout */ events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; } /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { events[2] |= 0x80; + changed = true; + } - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (changed) + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events); } static void hci_init3_req(struct hci_request *req, unsigned long opt) Patches currently in stable-queue which might be from marcel(a)holtmann.org are queue-4.4/bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch queue-4.4/net-ieee802154-fix-net_device-reference-release-too-early.patch

7 years, 2 months

1
0
0 0

Patch "block: fix an error code in add_partition()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled block: fix an error code in add_partition() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: block-fix-an-error-code-in-add_partition.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 23 May 2017 17:28:36 +0300 Subject: block: fix an error code in add_partition() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ] We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/partition-generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -309,8 +309,10 @@ struct hd_struct *add_partition(struct g if (info) { struct partition_meta_info *pinfo = alloc_part_info(disk); - if (!pinfo) + if (!pinfo) { + err = -ENOMEM; goto out_free_stats; + } memcpy(pinfo, info, sizeof(*info)); p->info = pinfo; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.4/block-fix-an-error-code-in-add_partition.patch queue-4.4/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.4/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.4/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.4/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.4/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.4/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Date: Wed, 10 May 2017 08:54:11 -0500 Subject: blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> [ Upstream commit f36ea50ca0043e7b1204feaf1d2ba6bd68c08d36 ] When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1252,13 +1252,13 @@ static blk_qc_t blk_mq_make_request(stru blk_queue_bounce(q, &bio); + blk_queue_split(q, &bio, q->bio_split); + if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) { bio_io_error(bio); return BLK_QC_T_NONE; } - blk_queue_split(q, &bio, q->bio_split); - if (!is_flush_fua && !blk_queue_nomerges(q) && blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq)) return BLK_QC_T_NONE; Patches currently in stable-queue which might be from wenxiong(a)linux.vnet.ibm.com are queue-4.4/blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch

7 years, 2 months

1
0
0 0

Patch "blk-mq: fix kernel oops in blk_mq_tag_idle()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: fix kernel oops in blk_mq_tag_idle() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ming Lei <ming.lei(a)redhat.com> Date: Tue, 9 Jan 2018 21:28:29 +0800 Subject: blk-mq: fix kernel oops in blk_mq_tag_idle() From: Ming Lei <ming.lei(a)redhat.com> [ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by: Zhang Yi <yizhan(a)redhat.com> Tested-by: Zhang Yi <yizhan(a)redhat.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1634,7 +1634,8 @@ static void blk_mq_exit_hctx(struct requ { unsigned flush_start_tag = set->queue_depth; - blk_mq_tag_idle(hctx); + if (blk_mq_hw_queue_mapped(hctx)) + blk_mq_tag_idle(hctx); if (set->ops->exit_request) set->ops->exit_request(set->driver_data, Patches currently in stable-queue which might be from ming.lei(a)redhat.com are queue-4.4/blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch queue-4.4/fix-loop-device-flush-before-configure-v3.patch

7 years, 2 months

1
0
0 0

Patch "bio-integrity: Do not allocate integrity context for bio w/o data" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bio-integrity: Do not allocate integrity context for bio w/o data to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Dmitry Monakhov <dmonakhov(a)openvz.org> Date: Wed, 10 May 2017 19:20:44 +0400 Subject: bio-integrity: Do not allocate integrity context for bio w/o data From: Dmitry Monakhov <dmonakhov(a)openvz.org> [ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Dmitry Monakhov <dmonakhov(a)openvz.org> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/bio-integrity.c | 3 +++ 1 file changed, 3 insertions(+) --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -175,6 +175,9 @@ bool bio_integrity_enabled(struct bio *b if (!bio_is_rw(bio)) return false; + if (!bio_sectors(bio)) + return false; + /* Already protected? */ if (bio_integrity(bio)) return false; Patches currently in stable-queue which might be from dmonakhov(a)openvz.org are queue-4.4/bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch

7 years, 2 months

1
0
0 0

Patch "bcache: stop writeback thread after detaching" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: stop writeback thread after detaching to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-stop-writeback-thread-after-detaching.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:19 -0800 Subject: bcache: stop writeback thread after detaching From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/super.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -890,6 +890,12 @@ static void cached_dev_detach_finish(str mutex_lock(&bch_register_lock); + cancel_delayed_work_sync(&dc->writeback_rate_update); + if (!IS_ERR_OR_NULL(dc->writeback_thread)) { + kthread_stop(dc->writeback_thread); + dc->writeback_thread = NULL; + } + memset(&dc->sb.set_uuid, 0, 16); SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE); Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.4/bcache-segregate-flash-only-volume-write-streams.patch queue-4.4/bcache-stop-writeback-thread-after-detaching.patch

7 years, 2 months

1
0
0 0

Patch "bcache: segregate flash only volume write streams" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: segregate flash only volume write streams to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-segregate-flash-only-volume-write-streams.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:21 -0800 Subject: bcache: segregate flash only volume write streams From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/alloc.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) --- a/drivers/md/bcache/alloc.c +++ b/drivers/md/bcache/alloc.c @@ -514,15 +514,21 @@ struct open_bucket { /* * We keep multiple buckets open for writes, and try to segregate different - * write streams for better cache utilization: first we look for a bucket where - * the last write to it was sequential with the current write, and failing that - * we look for a bucket that was last used by the same task. + * write streams for better cache utilization: first we try to segregate flash + * only volume write streams from cached devices, secondly we look for a bucket + * where the last write to it was sequential with the current write, and + * failing that we look for a bucket that was last used by the same task. * * The ideas is if you've got multiple tasks pulling data into the cache at the * same time, you'll get better cache utilization if you try to segregate their * data and preserve locality. * - * For example, say you've starting Firefox at the same time you're copying a + * For example, dirty sectors of flash only volume is not reclaimable, if their + * dirty sectors mixed with dirty sectors of cached device, such buckets will + * be marked as dirty and won't be reclaimed, though the dirty data of cached + * device have been written back to backend device. + * + * And say you've starting Firefox at the same time you're copying a * bunch of files. Firefox will likely end up being fairly hot and stay in the * cache awhile, but the data you copied might not be; if you wrote all that * data to the same buckets it'd get invalidated at the same time. @@ -539,7 +545,10 @@ static struct open_bucket *pick_data_buc struct open_bucket *ret, *ret_task = NULL; list_for_each_entry_reverse(ret, &c->data_buckets, list) - if (!bkey_cmp(&ret->key, search)) + if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) != + UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)])) + continue; + else if (!bkey_cmp(&ret->key, search)) goto found; else if (ret->last_write_point == write_point) ret_task = ret; Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.4/bcache-segregate-flash-only-volume-write-streams.patch queue-4.4/bcache-stop-writeback-thread-after-detaching.patch

7 years, 2 months

1
0
0 0

Patch "ath5k: fix memory leak on buf on failed eeprom read" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath5k: fix memory leak on buf on failed eeprom read to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Wed, 3 May 2017 15:26:00 +0100 Subject: ath5k: fix memory leak on buf on failed eeprom read From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit 8fed6823e06e43ee9cf7c0ffecec2f9111ce6201 ] The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath5k/debug.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -939,7 +939,10 @@ static int open_file_eeprom(struct inode } for (i = 0; i < eesize; ++i) { - AR5K_EEPROM_READ(i, val); + if (!ath5k_hw_nvram_read(ah, i, &val)) { + ret = -EIO; + goto freebuf; + } buf[i] = val; } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.4/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.4/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.4/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.4/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

7 years, 2 months

1
0
0 0

Patch "ata: libahci: properly propagate return value of platform_get_irq()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ata: libahci: properly propagate return value of platform_get_irq() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Date: Tue, 16 May 2017 14:06:12 +0200 Subject: ata: libahci: properly propagate return value of platform_get_irq() From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> [ Upstream commit c034640a32f8456018d9c8c83799ead683046b95 ] When platform_get_irq() fails, it returns an error code, which libahci_platform and replaces it by -EINVAL. This commit fixes that by propagating the error code. It fixes the situation where platform_get_irq() returns -EPROBE_DEFER because the interrupt controller is not available yet, and generally looks like the right thing to do. We pay attention to not show the "no irq" message when we are in an EPROBE_DEFER situation, because the driver probing will be retried later on, once the interrupt controller becomes available to provide the interrupt. Signed-off-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/ata/libahci_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platf irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; + if (irq != -EPROBE_DEFER) + dev_err(dev, "no irq\n"); + return irq; } hpriv->irq = irq; Patches currently in stable-queue which might be from thomas.petazzoni(a)free-electrons.com are queue-4.4/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch

7 years, 2 months

1
0
0 0

Patch "async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Anup Patel <anup.patel(a)broadcom.com> Date: Mon, 15 May 2017 10:34:53 +0530 Subject: async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() From: Anup Patel <anup.patel(a)broadcom.com> [ Upstream commit baae03a0e2497f49704628fd0aaf993cf98e1b99 ] The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output of Tx descriptor is to be used by next/dependent Tx descriptor. The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome() when calling dma->device_prep_dma_pq() under following conditions: 1. ASYNC_TX_FENCE not set in submit->flags 2. DMA_PREP_FENCE not set in dma_flags 3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags) This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking inspiration from do_async_xor() implementation. Signed-off-by: Anup Patel <anup.patel(a)broadcom.com> Reviewed-by: Ray Jui <ray.jui(a)broadcom.com> Reviewed-by: Scott Branden <scott.branden(a)broadcom.com> Acked-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/async_tx/async_pq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *c dma_addr_t dma_dest[2]; int src_off = 0; - if (submit->flags & ASYNC_TX_FENCE) - dma_flags |= DMA_PREP_FENCE; - while (src_cnt > 0) { submit->flags = flags_orig; pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags)); @@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *c if (cb_fn_orig) dma_flags |= DMA_PREP_INTERRUPT; } + if (submit->flags & ASYNC_TX_FENCE) + dma_flags |= DMA_PREP_FENCE; /* Drivers force forward progress in case they can not provide * a descriptor Patches currently in stable-queue which might be from anup.patel(a)broadcom.com are queue-4.4/async_tx-fix-dma_prep_fence-usage-in-do_async_gen_syndrome.patch

7 years, 2 months

1
0
0 0

Patch "ASoC: rsnd: SSI PIO adjust to 24bit mode" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: rsnd: SSI PIO adjust to 24bit mode to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-rsnd-ssi-pio-adjust-to-24bit-mode.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Date: Wed, 24 May 2017 01:17:10 +0000 Subject: ASoC: rsnd: SSI PIO adjust to 24bit mode From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> [ Upstream commit 7819a942de7b993771bd9377babc80485fe7606b ] commit 90431eb49bff ("ASoC: rsnd: don't use PDTA bit for 24bit on SSI") fixups 24bit mode data alignment, but PIO was not cared. This patch fixes PIO mode 24bit data alignment Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/sh/rcar/ssi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -453,6 +453,13 @@ static void __rsnd_ssi_interrupt(struct struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); u32 *buf = (u32 *)(runtime->dma_area + rsnd_dai_pointer_offset(io, 0)); + int shift = 0; + + switch (runtime->sample_bits) { + case 32: + shift = 8; + break; + } /* * 8/16/32 data can be assesse to TDR/RDR register @@ -460,9 +467,9 @@ static void __rsnd_ssi_interrupt(struct * see rsnd_ssi_init() */ if (rsnd_io_is_play(io)) - rsnd_mod_write(mod, SSITDR, *buf); + rsnd_mod_write(mod, SSITDR, (*buf) << shift); else - *buf = rsnd_mod_read(mod, SSIRDR); + *buf = (rsnd_mod_read(mod, SSIRDR) >> shift); elapsed = rsnd_dai_pointer_update(io, sizeof(*buf)); } Patches currently in stable-queue which might be from kuninori.morimoto.gx(a)renesas.com are queue-4.4/asoc-rsnd-ssi-pio-adjust-to-24bit-mode.patch

7 years, 2 months

1
0
0 0

Patch "ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sat, 6 Jan 2018 21:18:24 +0100 Subject: ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit eaadb1caa966a91128297b754e90b7c92b350a00 ] In some error handling paths, an error code is assiegned to 'ret'. However, the function always return 0. Fix it and return the error code if such an error paths is taken. Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/atom/sst/sst_stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/soc/intel/atom/sst/sst_stream.c +++ b/sound/soc/intel/atom/sst/sst_stream.c @@ -221,7 +221,7 @@ int sst_send_byte_stream_mrfld(struct in sst_free_block(sst_drv_ctx, block); out: test_and_clear_bit(pvt_id, &sst_drv_ctx->pvt_id); - return 0; + return ret; } /* Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.4/cpuidle-dt-add-missing-of_node_put.patch queue-4.4/edac-mv64x60-fix-an-error-handling-path.patch queue-4.4/smb2-fix-share-type-handling.patch queue-4.4/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

7 years, 2 months

1
0
0 0

Patch "ASoC: Intel: cht_bsw_rt5645: Analog Mic support" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: cht_bsw_rt5645: Analog Mic support to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-cht_bsw_rt5645-analog-mic-support.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 2 Jan 2018 19:53:14 +0100 Subject: ASoC: Intel: cht_bsw_rt5645: Analog Mic support From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit b70b309950418437bbd2a30afd169c4f09dee3e5 ] Various Cherry Trail boards with a rt5645 codec have an analog mic connected to IN2P + IN2N. The mic on this boards also needs micbias to be enabled, on some boards micbias1 is used and on others micbias2, so we enable both. This commit adds a new "Int Analog Mic" DAPM widget for this, so that we do not end up enabling micbias on boards with a digital mic which uses the already present "Int Mic" widget. Some existing UCM files already refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice, but these don't work anyways since they enable the RECMIX BST1 Switch instead of the BST2 switch. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/boards/cht_bsw_rt5645.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/sound/soc/intel/boards/cht_bsw_rt5645.c +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c @@ -96,6 +96,7 @@ static const struct snd_soc_dapm_widget SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_MIC("Int Analog Mic", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_POST_PMD), @@ -106,6 +107,8 @@ static const struct snd_soc_dapm_route c {"IN1N", NULL, "Headset Mic"}, {"DMIC L1", NULL, "Int Mic"}, {"DMIC R1", NULL, "Int Mic"}, + {"IN2P", NULL, "Int Analog Mic"}, + {"IN2N", NULL, "Int Analog Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Ext Spk", NULL, "SPOL"}, @@ -119,6 +122,9 @@ static const struct snd_soc_dapm_route c {"Headphone", NULL, "Platform Clock"}, {"Headset Mic", NULL, "Platform Clock"}, {"Int Mic", NULL, "Platform Clock"}, + {"Int Analog Mic", NULL, "Platform Clock"}, + {"Int Analog Mic", NULL, "micbias1"}, + {"Int Analog Mic", NULL, "micbias2"}, {"Ext Spk", NULL, "Platform Clock"}, }; @@ -147,6 +153,7 @@ static const struct snd_kcontrol_new cht SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), SOC_DAPM_PIN_SWITCH("Int Mic"), + SOC_DAPM_PIN_SWITCH("Int Analog Mic"), SOC_DAPM_PIN_SWITCH("Ext Spk"), }; Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.4/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch queue-4.4/asoc-intel-cht_bsw_rt5645-analog-mic-support.patch

7 years, 2 months

1
0
0 0

Patch "arp: honour gratuitous ARP _replies_" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arp: honour gratuitous ARP _replies_ to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arp-honour-gratuitous-arp-_replies_.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ihar Hrachyshka <ihrachys(a)redhat.com> Date: Tue, 16 May 2017 07:53:43 -0700 Subject: arp: honour gratuitous ARP _replies_ From: Ihar Hrachyshka <ihrachys(a)redhat.com> [ Upstream commit 23d268eb240954e6e78f7cfab04f2b1e79f84489 ] When arp_accept is 1, gratuitous ARPs are supposed to override matching entries irrespective of whether they arrive during locktime. This was implemented in commit 56022a8fdd87 ("ipv4: arp: update neighbour address when a gratuitous arp is received and arp_accept is set") There is a glitch in the patch though. RFC 2002, section 4.6, "ARP, Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can be either of Request or Reply type. Those Reply gratuitous ARPs can be triggered with standard tooling, for example, arping -A option does just that. This patch fixes the glitch, making both Request and Reply flavours of gratuitous ARPs to behave identically. As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware Address field should also be set to the link-layer address to which this cache entry should be updated. The field is present in ARP over Ethernet but not in IEEE 1394. In this patch, I don't consider any broadcasted ARP replies as gratuitous if the field is not present, to conform the standard. It's not clear whether there is such a thing for IEEE 1394 as a gratuitous ARP reply; until it's cleared up, we will ignore such broadcasts. Note that they will still update existing ARP cache entries, assuming they arrive out of locktime time interval. Signed-off-by: Ihar Hrachyshka <ihrachys(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/arp.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -658,6 +658,7 @@ static int arp_process(struct net *net, unsigned char *arp_ptr; struct rtable *rt; unsigned char *sha; + unsigned char *tha = NULL; __be32 sip, tip; u16 dev_type = dev->type; int addr_type; @@ -729,6 +730,7 @@ static int arp_process(struct net *net, break; #endif default: + tha = arp_ptr; arp_ptr += dev->addr_len; } memcpy(&tip, arp_ptr, 4); @@ -839,8 +841,18 @@ static int arp_process(struct net *net, It is possible, that this option should be enabled for some devices (strip is candidate) */ - is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip && - addr_type == RTN_UNICAST; + is_garp = tip == sip && addr_type == RTN_UNICAST; + + /* Unsolicited ARP _replies_ also require target hwaddr to be + * the same as source. + */ + if (is_garp && arp->ar_op == htons(ARPOP_REPLY)) + is_garp = + /* IPv4 over IEEE 1394 doesn't provide target + * hardware address field in its ARP payload. + */ + tha && + !memcmp(tha, sha, dev->addr_len); if (!n && ((arp->ar_op == htons(ARPOP_REPLY) && Patches currently in stable-queue which might be from ihrachys(a)redhat.com are queue-4.4/arp-honour-gratuitous-arp-_replies_.patch queue-4.4/neighbour-update-neigh-timestamps-iff-update-is-effective.patch

7 years, 2 months

1
0
0 0

Patch "arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Will Deacon <will.deacon(a)arm.com> Date: Wed, 5 Apr 2017 11:14:05 +0100 Subject: arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage From: Will Deacon <will.deacon(a)arm.com> [ Upstream commit 5f16a046f8e144c294ef98cd29d9458b5f8273e5 ] FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg field as a shift value, potentially leading to a left shift value that is negative or with an absolute value that is significantly larger then the size of the type. UBSAN chokes with: ================================================================================ UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13 shift exponent -1 is negative CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11 Hardware name: linux,dummy-virt (DT) Call trace: [<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73 [<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228 [<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline] [<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52 [<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164 [<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421 [<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline] [<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline] [<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231 [<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline] [<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249 [<ffff200008084770>] el0_svc_naked+0x24/0x28 ================================================================================ syz-executor1 uses obsolete (PF_INET,SOCK_PACKET) sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT This patch attempts to fix some of this by: * Making encoded_op an unsigned type, so we can shift it left even if the top bit is set. * Casting to signed prior to shifting right when extracting oparg and cmparg * Consider only the bottom 5 bits of oparg when using it as a left-shift value. Whilst I think this catches all of the issues, I'd much prefer to remove this stuff, as I think it's unused and the bugs are copy-pasted between a bunch of architectures. Reviewed-by: Robin Murphy <robin.murphy(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm64/include/asm/futex.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -53,16 +53,16 @@ : "memory") static inline int -futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) +futex_atomic_op_inuser(unsigned int encoded_op, u32 __user *uaddr) { int op = (encoded_op >> 28) & 7; int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; + int oparg = (int)(encoded_op << 8) >> 20; + int cmparg = (int)(encoded_op << 20) >> 20; int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; + oparg = 1U << (oparg & 0x1f); if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; Patches currently in stable-queue which might be from will.deacon(a)arm.com are queue-4.4/arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch

7 years, 2 months

1
0
0 0

Patch "ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Leonard Crestez <leonard.crestez(a)nxp.com> Date: Tue, 6 Jun 2017 20:50:42 +0300 Subject: ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull From: Leonard Crestez <leonard.crestez(a)nxp.com> [ Upstream commit b3ea575770c7eeb259c77b6861cd14d00eb309df ] Support for imx6ull is already present but it's based on of_machine_is_compatible("fsl,imx6ull") checks. Add it to the MXC_CPU_* enumeration as well. This also fixes /sys/devices/soc0/soc_id reading "Unknown". Signed-off-by: Leonard Crestez <leonard.crestez(a)nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-imx/cpu.c | 3 +++ arch/arm/mach-imx/mxc.h | 6 ++++++ 2 files changed, 9 insertions(+) --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -133,6 +133,9 @@ struct device * __init imx_soc_device_in case MXC_CPU_IMX6UL: soc_id = "i.MX6UL"; break; + case MXC_CPU_IMX6ULL: + soc_id = "i.MX6ULL"; + break; case MXC_CPU_IMX7D: soc_id = "i.MX7D"; break; --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -39,6 +39,7 @@ #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define MXC_CPU_IMX6UL 0x64 +#define MXC_CPU_IMX6ULL 0x65 #define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -171,6 +172,11 @@ static inline bool cpu_is_imx6ul(void) return __mxc_cpu_type == MXC_CPU_IMX6UL; } +static inline bool cpu_is_imx6ull(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6ULL; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; Patches currently in stable-queue which might be from leonard.crestez(a)nxp.com are queue-4.4/arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch

7 years, 2 months

1
0
0 0

Patch "ARM: dts: ls1021a: add "fsl, ls1021a-esdhc" compatible string to esdhc node" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-ls1021a-add-fsl-ls1021a-esdhc-compatible-string-to-esdhc-node.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Date: Thu, 16 Nov 2017 13:15:26 +0100 Subject: ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node From: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> [ Upstream commit d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ] Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to enable the broken timeout val quirk for ls1021a, but did not add the corresponding compatible string to the device tree, so it didn't really have any effect. Fix that. Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/ls1021a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -132,7 +132,7 @@ }; esdhc: esdhc@1560000 { - compatible = "fsl,esdhc"; + compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; Patches currently in stable-queue which might be from rasmus.villemoes(a)prevas.dk are queue-4.4/arm-dts-ls1021a-add-fsl-ls1021a-esdhc-compatible-string-to-esdhc-node.patch

7 years, 2 months

1
0
0 0

Patch "ARM: dts: imx6qdl-wandboard: Fix audio channel swap" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx6qdl-wandboard: Fix audio channel swap to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx6qdl-wandboard-fix-audio-channel-swap.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Fabio Estevam <fabio.estevam(a)nxp.com> Date: Sun, 14 May 2017 11:50:50 -0300 Subject: ARM: dts: imx6qdl-wandboard: Fix audio channel swap From: Fabio Estevam <fabio.estevam(a)nxp.com> [ Upstream commit 79935915300c5eb88a0e94fa9148a7505c14a02a ] When running a stress playback/stop loop test on a mx6wandboard channel swaps can be noticed randomly. Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes the issue, so add the 'lrclk-strength' property to avoid the audio channel swaps. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -88,6 +88,7 @@ clocks = <&clks 201>; VDDA-supply = <&reg_2p5v>; VDDIO-supply = <&reg_3p3v>; + lrclk-strength = <3>; }; }; Patches currently in stable-queue which might be from fabio.estevam(a)nxp.com are queue-4.4/arm-dts-imx6qdl-wandboard-fix-audio-channel-swap.patch queue-4.4/arm-dts-imx53-qsrb-pulldown-pmic-irq-pin.patch queue-4.4/arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch

7 years, 2 months

1
0
0 0

Patch "ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx53-qsrb-pulldown-pmic-irq-pin.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Fabio Estevam <fabio.estevam(a)nxp.com> Date: Wed, 12 Apr 2017 18:31:18 -0300 Subject: ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin From: Fabio Estevam <fabio.estevam(a)nxp.com> [ Upstream commit 2fe4bff3516924a37e083e3211364abe59db1161 ] Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level") correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but missed to update the IOMUX of the PMIC GPIO as pull down. Fixes: e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level") Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx53-qsrb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -23,7 +23,7 @@ imx53-qsrb { pinctrl_pmic: pmicgrp { fsl,pins = < - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */ >; }; }; Patches currently in stable-queue which might be from fabio.estevam(a)nxp.com are queue-4.4/arm-dts-imx6qdl-wandboard-fix-audio-channel-swap.patch queue-4.4/arm-dts-imx53-qsrb-pulldown-pmic-irq-pin.patch queue-4.4/arm-imx-add-mxc_cpu_imx6ull-and-cpu_is_imx6ull.patch

7 years, 2 months

1
0
0 0

Patch "ARM: davinci: da8xx: Create DSP device only when assigned memory" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: davinci: da8xx: Create DSP device only when assigned memory to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-davinci-da8xx-create-dsp-device-only-when-assigned-memory.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Suman Anna <s-anna(a)ti.com> Date: Tue, 16 May 2017 17:13:45 -0500 Subject: ARM: davinci: da8xx: Create DSP device only when assigned memory From: Suman Anna <s-anna(a)ti.com> [ Upstream commit f97f03578b997a8ec2b9bc4928f958a865137268 ] The DSP device on Davinci platforms does not have an MMU and requires specific DDR memory to boot. This memory is reserved using the rproc_mem kernel boot parameter and is assigned to the device on non-DT boots. The remoteproc core uses the DMA API and so will fall back to assigning random memory if this memory is not assigned to the device, but the DSP remote processor boot will not be successful in such cases. So, check that memory has been reserved and assigned to the device specifically before even creating the DSP device. Signed-off-by: Suman Anna <s-anna(a)ti.com> Signed-off-by: Sekhar Nori <nsekhar(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/mach-davinci/devices-da8xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -795,6 +795,8 @@ static struct platform_device da8xx_dsp .resource = da8xx_rproc_resources, }; +static bool rproc_mem_inited __initdata; + #if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC) static phys_addr_t rproc_base __initdata; @@ -833,6 +835,8 @@ void __init da8xx_rproc_reserve_cma(void ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0); if (ret) pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret); + else + rproc_mem_inited = true; } #else @@ -847,6 +851,12 @@ int __init da8xx_register_rproc(void) { int ret; + if (!rproc_mem_inited) { + pr_warn("%s: memory not reserved for DSP, not registering DSP device\n", + __func__); + return -ENOMEM; + } + ret = platform_device_register(&da8xx_dsp); if (ret) pr_err("%s: can't register DSP device: %d\n", __func__, ret); Patches currently in stable-queue which might be from s-anna(a)ti.com are queue-4.4/arm-davinci-da8xx-create-dsp-device-only-when-assigned-memory.patch

7 years, 2 months

1
0
0 0

Patch "af_key: Fix slab-out-of-bounds in pfkey_compile_policy." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled af_key: Fix slab-out-of-bounds in pfkey_compile_policy. to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: af_key-fix-slab-out-of-bounds-in-pfkey_compile_policy.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Steffen Klassert <steffen.klassert(a)secunet.com> Date: Fri, 5 May 2017 07:40:42 +0200 Subject: af_key: Fix slab-out-of-bounds in pfkey_compile_policy. From: Steffen Klassert <steffen.klassert(a)secunet.com> [ Upstream commit d90c902449a7561f1b1d58ba5a0d11728ce8b0b2 ] The sadb_x_sec_len is stored in the unit 'byte divided by eight'. So we have to multiply this value by eight before we can do size checks. Otherwise we may get a slab-out-of-bounds when we memcpy the user sec_ctx. Fixes: df71837d502 ("[LSM-IPSec]: Security association restriction.") Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/key/af_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3305,7 +3305,7 @@ static struct xfrm_policy *pfkey_compile p += pol->sadb_x_policy_len*8; sec_ctx = (struct sadb_x_sec_ctx *)p; if (len < pol->sadb_x_policy_len*8 + - sec_ctx->sadb_x_sec_len) { + sec_ctx->sadb_x_sec_len*8) { *dir = -EINVAL; goto out; } Patches currently in stable-queue which might be from steffen.klassert(a)secunet.com are queue-4.4/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.4/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.4/xfrm-fix-state-migration-copy-replay-sequence-numbers.patch queue-4.4/af_key-fix-slab-out-of-bounds-in-pfkey_compile_policy.patch

7 years, 2 months

1
0
0 0

Patch "ACPICA: Events: Add runtime stub support for event APIs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ACPICA: Events: Add runtime stub support for event APIs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: acpica-events-add-runtime-stub-support-for-event-apis.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Lv Zheng <lv.zheng(a)intel.com> Date: Mon, 5 Jun 2017 16:40:02 +0800 Subject: ACPICA: Events: Add runtime stub support for event APIs From: Lv Zheng <lv.zheng(a)intel.com> [ Upstream commit 861ba6351c520328e94a78c923b415faa9116287 ] ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3bec Tested-by: Chandan Tagore <tagore.chandan(a)gmail.com> Signed-off-by: Lv Zheng <lv.zheng(a)intel.com> Signed-off-by: Bob Moore <robert.moore(a)intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/acpi/acpica/evxfevnt.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -180,6 +180,12 @@ acpi_status acpi_enable_event(u32 event, ACPI_FUNCTION_TRACE(acpi_enable_event); + /* If Hardware Reduced flag is set, there are no fixed events */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { @@ -237,6 +243,12 @@ acpi_status acpi_disable_event(u32 event ACPI_FUNCTION_TRACE(acpi_disable_event); + /* If Hardware Reduced flag is set, there are no fixed events */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { @@ -290,6 +302,12 @@ acpi_status acpi_clear_event(u32 event) ACPI_FUNCTION_TRACE(acpi_clear_event); + /* If Hardware Reduced flag is set, there are no fixed events */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { Patches currently in stable-queue which might be from lv.zheng(a)intel.com are queue-4.4/acpica-disassembler-abort-on-an-invalid-unknown-aml-opcode.patch queue-4.4/acpica-events-add-runtime-stub-support-for-event-apis.patch

7 years, 2 months

1
0
0 0

Patch "ACPICA: Disassembler: Abort on an invalid/unknown AML opcode" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ACPICA: Disassembler: Abort on an invalid/unknown AML opcode to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: acpica-disassembler-abort-on-an-invalid-unknown-aml-opcode.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Bob Moore <robert.moore(a)intel.com> Date: Mon, 5 Jun 2017 16:40:34 +0800 Subject: ACPICA: Disassembler: Abort on an invalid/unknown AML opcode From: Bob Moore <robert.moore(a)intel.com> [ Upstream commit 6f0527b77d9e0129dd8e50945b0d610ed943d6b2 ] ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cb Signed-off-by: Bob Moore <robert.moore(a)intel.com> Signed-off-by: Lv Zheng <lv.zheng(a)intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/acpi/acpica/psobject.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/drivers/acpi/acpica/psobject.c +++ b/drivers/acpi/acpica/psobject.c @@ -121,6 +121,9 @@ static acpi_status acpi_ps_get_aml_opcod (u32)(aml_offset + sizeof(struct acpi_table_header))); + ACPI_ERROR((AE_INFO, + "Aborting disassembly, AML byte code is corrupt")); + /* Dump the context surrounding the invalid opcode */ acpi_ut_dump_buffer(((u8 *)walk_state->parser_state. @@ -129,6 +132,14 @@ static acpi_status acpi_ps_get_aml_opcod sizeof(struct acpi_table_header) - 16)); acpi_os_printf(" */\n"); + + /* + * Just abort the disassembly, cannot continue because the + * parser is essentially lost. The disassembler can then + * randomly fail because an ill-constructed parse tree + * can result. + */ + return_ACPI_STATUS(AE_AML_BAD_OPCODE); #endif } @@ -293,6 +304,9 @@ acpi_ps_create_op(struct acpi_walk_state if (status == AE_CTRL_PARSE_CONTINUE) { return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE); } + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } /* Create Op structure and append to parent's argument list */ Patches currently in stable-queue which might be from robert.moore(a)intel.com are queue-4.4/acpica-disassembler-abort-on-an-invalid-unknown-aml-opcode.patch queue-4.4/acpica-events-add-runtime-stub-support-for-event-apis.patch

7 years, 2 months

1
0
0 0

[GIT PULL] commits for Linux 4.4

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi Greg, Pleae pull commits for Linux 4.4 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 8b5ab55d254f36e89b1b53aeac7223d2d102483e: Linux 4.4.121 (2018-03-11 16:19:47 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.4-04052018 for you to fetch changes up to e22d1f4feb9f9db420d20ed5038cae369c84354d: signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:51:32 -0400) - ---------------------------------------------------------------- for-greg-4.4-04052018 - ---------------------------------------------------------------- A Sun (1): [media] mceusb: sporadic RX truncation corruption fix Alan Stern (2): USB: ene_usb6250: fix first command execution USB: ene_usb6250: fix SCSI residue overwriting Andrea della Porta (1): staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning Antony Antony (1): xfrm: fix state migration copy replay sequence numbers Anup Patel (1): async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() Arjun Vynipadath (2): cxgb4: FW upgrade fixes cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages Arnd Bergmann (2): net/mlx5: avoid build warning for uniprocessor xen: avoid type warning in xchg_xen_ulong Arvind Yadav (1): dmaengine: imx-sdma: Handle return value of clk_prepare_enable Bart Van Assche (1): IB/srpt: Fix abort handling Bob Moore (1): ACPICA: Disassembler: Abort on an invalid/unknown AML opcode Boris Brezillon (1): mtd: nand: gpmi: Fix gpmi_nand_init() error path Bryan O'Donoghue (1): clk: Fix __set_clk_rates error print-string Chaitra P B (1): scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. Chris Wilson (1): e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails Christian Lamparter (1): net: emac: fix reset timeout with AR8035 phy Christophe JAILLET (3): SMB2: Fix share type handling ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' EDAC, mv64x60: Fix an error handling path Christophe Jaillet (1): cpuidle: dt: Add missing 'of_node_put()' Colin Ian King (4): netxen_nic: set rcode to the return status from the call to netxen_issue_cmd btrfs: fix incorrect error return ret being passed to mapping_set_error ath5k: fix memory leak on buf on failed eeprom read wl1251: check return from call to wl1251_acx_arp_ip_filter Dan Carpenter (6): ipmi_ssif: unlock on allocation failure drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests PowerCap: Fix an error code in powercap_register_zone() block: fix an error code in add_partition() libceph: NULL deref on crush_decode() error path pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() Dmitry Monakhov (1): bio-integrity: Do not allocate integrity context for bio w/o data Dmitry Torokhov (1): Input: elan_i2c - check if device is there before really probing Doug Berger (2): bus: brcmstb_gisb: Use register offsets with writes too bus: brcmstb_gisb: correct support for 64-bit address output Eric Dumazet (1): tcp: better validation of received ack sequences Eric W. Biederman (3): signal/metag: Document a conflict with SI_USER with SIGFPE signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP signal/arm: Document conflicts with SI_USER and SIGFPE Eryu Guan (1): ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() Fabio Estevam (2): ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin ARM: dts: imx6qdl-wandboard: Fix audio channel swap Firo Yang (1): hdlcdrv: Fix divide by zero in hdlcdrv_ioctl Ganesh Goudar (1): cxgb4: fix incorrect cim_la output for T6 Geert Uytterhoeven (2): serial: sh-sci: Fix race condition causing garbage during shutdown sh_eth: Use platform device for printing before register_netdev() Grygorii Strashko (1): net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control Guoqing Jiang (1): md-cluster: fix potential lock issue in add_new_disk Gustavo A. R. Silva (1): net: freescale: fix potential null pointer dereference Haishuang Yan (1): sit: reload iphdr in ipip6_rcv Hangbin Liu (1): l2tp: fix missing print session offset info Hans de Goede (2): ASoC: Intel: cht_bsw_rt5645: Analog Mic support HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices Heiko Carstens (1): s390: move _text symbol to address higher than zero Ido Shamay (1): net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport Ihar Hrachyshka (2): neighbour: update neigh timestamps iff update is effective arp: honour gratuitous ARP _replies_ Ivan Mikhaylov (1): powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] J. Bruce Fields (1): lockd: fix lockd shutdown race Jacob Keller (1): e1000e: fix race condition around skb_tstamp_tx() Jag Raman (1): sparc64: ldc abort during vds iso boot James Wang (1): Fix loop device flush before configure v3 Jan H. SchÃ¶nherr (1): KVM: nVMX: Fix handling of lmsw instruction Jason A. Donenfeld (1): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow Jason Yan (2): scsi: libsas: fix memory leak in sas_smp_get_phy_events() scsi: libsas: fix error when getting phy events Jesper Dangaard Brouer (1): mlx5: fix bug reading rss_hash_type from CQE Jia-Ju Bai (2): qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M mISDN: Fix a sleep-in-atomic bug Jim Baxter (1): net: cdc_ncm: Fix TX zero padding Jiri Olsa (2): perf trace: Add mmap alias for s390 perf tools: Fix copyfile_offset update of output offset Jisheng Zhang (1): usb: chipidea: properly handle host or gadget initialization failure Johannes Berg (1): cfg80211: make RATE_INFO_BW_20 the default Johannes Thumshirn (1): scsi: sg: don't return bogus Sg_requests Josh Poimboeuf (1): x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() Julia Cartwright (1): md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock KT Liao (2): Input: elantech - force relative mode on a certain module Input: elan_i2c - clear INT before resetting controller Kees Cook (3): bna: Avoid reading past end of buffer qlge: Avoid reading past end of buffer ray_cs: Avoid reading past end of buffer Kirill Tkhai (1): pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() Konstantin Khlebnikov (1): ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors Kuninori Morimoto (1): ASoC: rsnd: SSI PIO adjust to 24bit mode Leonard Crestez (1): ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull Lin Zhang (1): net: ieee802154: fix net_device reference release too early Linus Walleij (1): gpio: label descriptors using the device name Liping Zhang (1): netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize Lorenzo Bianconi (1): iio: magnetometer: st_magn_spi: fix spi_device_id table Luca Coelho (1): mac80211: bail out from prep_connection() if a reconfig is ongoing Lv Zheng (1): ACPICA: Events: Add runtime stub support for event APIs Maciej Purski (1): hwmon: (ina2xx) Make calibration register value fixed Mahesh Bandewar (1): ipv6: avoid dad-failures for addresses with NODAD Marcel Holtmann (1): Bluetooth: Send HCI Set Event Mask Page 2 command only when needed Marcin Nowakowski (3): MIPS: mm: fixed mappings: correct initialisation MIPS: mm: adjust PKMAP location MIPS: kprobes: flush_insn_slot should flush only if probe initialised Masami Hiramatsu (1): perf probe: Add warning message if there is unexpected event name Maurizio Lombardi (1): scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() Mauro Carvalho Chehab (1): media: videobuf2-core: don't go out of the buffer range Michael Ellerman (3): powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash selftests/powerpc: Fix TM resched DSCR test with some compilers powerpc/spufs: Fix coredump of SPU contexts Michael Schmitz (1): fix race in drivers/char/random.c:get_reg() Miklos Szeredi (1): ovl: filter trusted xattr for non-admin Milian Wolff (1): perf report: Ensure the perf DSO mapping matches what libdw sees Ming Lei (1): blk-mq: fix kernel oops in blk_mq_tag_idle() Mintz, Yuval (1): bnx2x: Allow vfs to disable txvlan offload Namhyung Kim (2): perf header: Set proper module name when build-id event found perf tests: Decompress kernel module before objdump Neil Horman (1): vmxnet3: ensure that adapter is in proper state during force_close NeilBrown (1): SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() Nikita Yushchenko (2): iio: hi8435: avoid garbage event at first enable iio: hi8435: cleanup reset gpio Nithin Sujir (1): bonding: Don't update slave->link until ready to commit Pan Bian (3): rtc: snvs: fix an incorrect check of return value usb: dwc3: keystone: check return value [media] cx25840: fix unchecked return values Paul Mackerras (1): KVM: PPC: Book3S PR: Check copy_to/from_user return values Peter Zijlstra (2): x86/tsc: Provide 'tsc=unstable' boot parameter perf/core: Correct event creation with PERF_FORMAT_GROUP Pieter \"PoroCYon\" Sluys (1): vfb: fix video mode and line_length being set when loaded Rabin Vincent (1): CIFS: silence lockdep splat in cifs_relock_file() Rafael David Tinoco (1): scsi: libiscsi: Allow sd_shutdown on bad transport Rasmus Villemoes (1): ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node Robert Jarzmik (1): tags: honor COMPILED_SOURCE with apart output directory Roman Kapl (1): net: move somaxconn init from sysctl code Roman Pen (1): KVM: SVM: do not zero out segment attributes if segment is unusable or not present Roopa Prabhu (1): vxlan: dont migrate permanent fdb entries during learn Russell King (1): net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support Sowmini Varadhan (1): rds; Reset rs->rs_bound_addr in rds_add_bound() failure path Stefan Haberland (1): s390/dasd: fix hanging safe offline Stefan Wahren (1): net: qca_spi: Fix alignment issues in rx path Steffen Klassert (1): af_key: Fix slab-out-of-bounds in pfkey_compile_policy. Stephen Smalley (1): selinux: do not check open permission on sockets Sudeep Holla (1): clk: scpi: fix return type of __scpi_dvfs_round_rate Suman Anna (1): ARM: davinci: da8xx: Create DSP device only when assigned memory Talat Batheesh (2): net/mlx4_en: Avoid adding steering rules with invalid ring net/mlx4: Fix the check in attaching steering rules Tang Junhui (2): bcache: stop writeback thread after detaching bcache: segregate flash only volume write streams Tariq Toukan (1): net/mlx5: Tolerate irq_set_affinity_hint() failures Thomas Bogendoerfer (1): Fix serial console on SNI RM400 machines Thomas Petazzoni (1): ata: libahci: properly propagate return value of platform_get_irq() Tin Huynh (1): leds: pca955x: Correct I2C Functionality Tomi Valkeinen (1): drm/omap: fix tiled buffer stride calculations Tony Lindgren (1): tty: n_gsm: Allow ADM response in addition to UA for control dlci Trond Myklebust (2): NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION NFSv4.1: Work around a Linux server bug... Vaibhav Jain (2): rtc: opal: Handle disabled TPO in opal_get_tpo_time() rtc: interface: Validate alarm-time before handling rollover Varun Prakash (1): scsi: csiostor: fix use after free in csio_hw_use_fwconfig() Vignesh R (1): serial: 8250: omap: Disable DMA for console UART Vlastimil Babka (1): sched/numa: Use down_read_trylock() for the mmap_sem Wen Xiong (1): blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op Will Deacon (1): arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage Willem de Bruijn (1): skbuff: only inherit relevant tx_flags Xin Long (1): sctp: fix recursive locking warning in sctp_do_peeloff Yi Zeng (1): thermal: power_allocator: fix one race condition issue for thermal_instances list chenxiang (1): scsi: libsas: initialize sas_phy status according to response of DISCOVER linzhang (2): net: x25: fix one potential use-after-free issue net: llc: add lock_sock in llc_ui_bind to avoid a race condition arch/arm/boot/dts/imx53-qsrb.dts | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 + arch/arm/boot/dts/ls1021a.dtsi | 2 +- arch/arm/include/asm/xen/events.h | 2 +- arch/arm/include/uapi/asm/siginfo.h | 13 ++++ arch/arm/mach-davinci/devices-da8xx.c | 10 +++ arch/arm/mach-imx/cpu.c | 3 + arch/arm/mach-imx/mxc.h | 6 ++ arch/arm/vfp/vfpmodule.c | 2 +- arch/arm64/include/asm/futex.h | 8 +- arch/metag/include/uapi/asm/siginfo.h | 7 ++ arch/metag/kernel/traps.c | 2 +- arch/mips/include/asm/kprobes.h | 3 +- arch/mips/include/asm/pgtable-32.h | 7 +- arch/mips/mm/pgtable-32.c | 6 +- arch/powerpc/include/asm/page.h | 12 +++ arch/powerpc/include/uapi/asm/siginfo.h | 15 ++++ arch/powerpc/kernel/time.c | 14 +++- arch/powerpc/kernel/traps.c | 10 +-- arch/powerpc/kvm/book3s_pr_papr.c | 34 +++++++-- arch/powerpc/platforms/cell/spufs/coredump.c | 2 + arch/s390/kernel/vmlinux.lds.S | 8 +- arch/sparc/kernel/ldc.c | 7 +- arch/x86/kernel/tsc.c | 2 + arch/x86/kvm/svm.c | 24 +++--- arch/x86/kvm/vmx.c | 7 +- arch/x86/lib/csum-copy_64.S | 12 +-- block/bio-integrity.c | 3 + block/blk-mq.c | 7 +- block/partition-generic.c | 4 +- crypto/async_tx/async_pq.c | 5 +- drivers/acpi/acpica/evxfevnt.c | 18 +++++ drivers/acpi/acpica/psobject.c | 14 ++++ drivers/ata/libahci_platform.c | 5 +- drivers/block/loop.c | 3 + drivers/bus/brcmstb_gisb.c | 42 ++++++----- drivers/char/ipmi/ipmi_ssif.c | 2 + drivers/char/random.c | 6 +- drivers/clk/clk-conf.c | 2 +- drivers/clk/clk-scpi.c | 6 +- drivers/cpuidle/dt_idle_states.c | 4 +- drivers/dma/imx-sdma.c | 23 ++++-- drivers/edac/mv64x60_edac.c | 2 +- drivers/gpio/gpiolib.c | 3 +- drivers/gpu/drm/omapdrm/omap_gem.c | 4 +- drivers/hid/i2c-hid/i2c-hid.c | 13 ++++ drivers/hwmon/ina2xx.c | 87 +++++++++++++--------- drivers/iio/adc/hi8435.c | 27 +++++-- drivers/iio/magnetometer/st_magn_spi.c | 2 - drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +- drivers/input/mouse/elan_i2c_core.c | 7 ++ drivers/input/mouse/elan_i2c_i2c.c | 9 ++- drivers/input/mouse/elantech.c | 11 +++ drivers/isdn/mISDN/stack.c | 2 +- drivers/leds/leds-pca955x.c | 2 +- drivers/md/bcache/alloc.c | 19 +++-- drivers/md/bcache/super.c | 6 ++ drivers/md/md-cluster.c | 4 +- drivers/md/raid5.c | 17 ++--- drivers/media/i2c/cx25840/cx25840-core.c | 36 +++++---- drivers/media/rc/mceusb.c | 9 ++- drivers/media/v4l2-core/videobuf2-core.c | 4 + drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 ++- drivers/net/bonding/bond_main.c | 11 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 ++++- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 32 +++++++- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 23 ++++-- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++- drivers/net/ethernet/ibm/emac/core.c | 26 ++++++- drivers/net/ethernet/intel/e1000e/netdev.c | 17 ++++- drivers/net/ethernet/mellanox/mlx4/mcg.c | 15 +++- drivers/net/ethernet/mellanox/mlx4/qp.c | 19 +++++ .../net/ethernet/mellanox/mlx4/resource_tracker.c | 16 ++-- drivers/net/ethernet/mellanox/mlx5/core/main.c | 14 +--- .../net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +- drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 +- drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++- drivers/net/ethernet/renesas/sh_eth.c | 2 +- drivers/net/ethernet/ti/cpsw.c | 16 ++++ drivers/net/hamradio/hdlcdrv.c | 2 + drivers/net/phy/phy.c | 6 ++ drivers/net/usb/cdc_ncm.c | 11 ++- drivers/net/vmxnet3/vmxnet3_drv.c | 5 ++ drivers/net/vxlan.c | 2 +- drivers/net/wireless/ath/ath5k/debug.c | 5 +- drivers/net/wireless/ray_cs.c | 7 +- drivers/net/wireless/ti/wl1251/main.c | 3 +- drivers/powercap/powercap_sys.c | 1 + drivers/rtc/interface.c | 9 ++- drivers/rtc/rtc-opal.c | 10 +++ drivers/rtc/rtc-snvs.c | 2 +- drivers/s390/block/dasd.c | 8 +- drivers/scsi/bnx2fc/bnx2fc.h | 1 + drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 ++- drivers/scsi/csiostor/csio_hw.c | 5 +- drivers/scsi/libiscsi.c | 24 +++++- drivers/scsi/libsas/sas_expander.c | 4 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++---- drivers/scsi/sg.c | 5 +- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- drivers/thermal/power_allocator.c | 2 + drivers/tty/n_gsm.c | 17 ++++- drivers/tty/serial/8250/8250_omap.c | 4 + drivers/tty/serial/sccnxp.c | 15 ++-- drivers/tty/serial/sh-sci.c | 16 +++- drivers/usb/chipidea/core.c | 29 ++++++-- drivers/usb/dwc3/dwc3-keystone.c | 4 + drivers/usb/storage/ene_ub6250.c | 11 ++- drivers/video/fbdev/vfb.c | 17 +++++ fs/btrfs/extent_io.c | 2 +- fs/cifs/file.c | 2 +- fs/cifs/smb2pdu.c | 14 ++-- fs/ext4/file.c | 2 +- fs/ext4/mballoc.c | 23 +++--- fs/lockd/svc.c | 6 +- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + fs/nfs/nfs4proc.c | 13 +++- fs/nfs/nfs4state.c | 10 ++- fs/overlayfs/inode.c | 12 ++- include/linux/mlx4/qp.h | 1 + include/linux/mlx5/device.h | 10 ++- include/linux/skbuff.h | 8 +- include/net/cfg80211.h | 2 +- include/net/x25.h | 4 +- kernel/events/core.c | 15 ++-- kernel/pid.c | 4 +- kernel/sched/fair.c | 3 +- net/bluetooth/hci_core.c | 17 ++++- net/ceph/osdmap.c | 1 + net/core/neighbour.c | 14 +++- net/core/net_namespace.c | 19 +++++ net/core/skbuff.c | 75 ++++++++++++------- net/core/sysctl_net_core.c | 2 - net/ieee802154/socket.c | 8 +- net/ipv4/arp.c | 16 +++- net/ipv4/tcp_input.c | 24 +++--- net/ipv6/addrconf.c | 5 +- net/ipv6/sit.c | 1 + net/key/af_key.c | 2 +- net/l2tp/l2tp_netlink.c | 2 + net/llc/af_llc.c | 3 + net/mac80211/mlme.c | 4 + net/netfilter/nf_conntrack_netlink.c | 7 +- net/rds/bind.c | 1 + net/sctp/socket.c | 4 +- net/sunrpc/xprtsock.c | 7 +- net/x25/af_x25.c | 24 ++++-- net/x25/sysctl_net_x25.c | 5 +- net/xfrm/xfrm_state.c | 2 + scripts/tags.sh | 1 + security/selinux/hooks.c | 10 ++- sound/soc/intel/atom/sst/sst_stream.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 7 ++ sound/soc/sh/rcar/ssi.c | 11 ++- tools/perf/builtin-trace.c | 4 + tools/perf/tests/code-reading.c | 20 ++++- tools/perf/util/header.c | 12 ++- tools/perf/util/probe-event.c | 8 ++ tools/perf/util/unwind-libdw.c | 8 ++ tools/perf/util/util.c | 2 +- .../testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- 164 files changed, 1201 insertions(+), 420 deletions(-) create mode 100644 arch/arm/include/uapi/asm/siginfo.h -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAlrFwQ4ACgkQ3qZv95d3 LNzGtw/+Nd/PS83fnVKOMqF0c6lsQZceNbS/sj2GdLz76tHbihrp3ewCYSnEUdh7 kHisfISwFfCeP7+L3lXOmDW6tWd5XglV85v89MFzRBzMXMaSgaL8bDpX0HKhI+Ju RUsN52jDTUGgEN7BGH2VX6wGaJW3SbsCFyzcMN5eQfwzD18mkQKn7rZ3X1MV/X2H lx2H+N5PlQZUJrx9UHvSXCZNvT8ujaSP7TiqQX83VWyEpn1RtVWEJaXYN8k/xChb INkNq4k4n58FIpK+RM8UXU+hlVF2sXdd4iItlUg570eTpPgrIFQXmcXw7Oc1Aafx 6NrYFe2A6DTjJdJKI8MCH5AXizlYAUm0fYA2x2qJ2E3l5+31iQFj9nW8ub45ZT0k lmjNHG258AIjrwjnvTeaGssp3Z8fG1Zin501g3KFI0L77LvC5Cgpvkf8u8rwNGW0 8XG5Lc17a2EU0htC8Ex0ta1lsIFZsPB+mzc/mWKeclKQp64xqtxyye/nDG7dRNNA g0ZE4f54M4DTzuVrBoi0BZw73WAeP0bvIfQJkob4czq/Jwj2jlzb5j8yS4PC9iVZ w5bKm1mcOMPzcUkxupDP23X80GZE19CpE/vEcu6w1ZDb8ON7t5wqU0AZ1Jak2LPp 9ObVXaK1igTawwNuU4LMY1bJ0zao3k07ogS4SzjWTUTwLjy3F+w= =EwI4 -----END PGP SIGNATURE-----

7 years, 2 months

2
1
0 0

[GIT PULL] commits for Linux 4.9

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi Greg, Pleae pull commits for Linux 4.9 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit b67416226a0cff3f49032de36906ad1ebe5694a0: Linux 4.9.87 (2018-03-11 16:21:35 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.9-04052018 for you to fetch changes up to 64db1c678b09617a9e325fcb25daec97380d93f6: signal/arm: Document conflicts with SI_USER and SIGFPE (2018-04-05 00:52:49 -0400) - ---------------------------------------------------------------- for-greg-4.9-04052018 - ---------------------------------------------------------------- A Sun (1): [media] mceusb: sporadic RX truncation corruption fix Alan Stern (2): USB: ene_usb6250: fix first command execution USB: ene_usb6250: fix SCSI residue overwriting Alexandre Belloni (1): clk: at91: fix clk-generated parenting Amir Goldstein (1): ovl: persistent inode numbers for upper hardlinks Andrea della Porta (1): staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning Andy Shevchenko (1): sdhci: Advertise 2.0v supply on SDIO host controller Anilkumar Kolli (1): ath10k: add BMI parameters to fix calibration from DT/pre-cal Antony Antony (1): xfrm: fix state migration copy replay sequence numbers Anup Patel (1): async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() Ard Biesheuvel (1): arm64: kernel: restrict /dev/mem read() calls to linear region Arjun Vynipadath (3): cxgb4: FW upgrade fixes cxgb4: Fix netdev_features flag cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages Arnd Bergmann (2): net/mlx5: avoid build warning for uniprocessor xen: avoid type warning in xchg_xen_ulong Arvind Yadav (1): dmaengine: imx-sdma: Handle return value of clk_prepare_enable Bart Van Assche (2): IB/srpt: Fix abort handling IB/srpt: Avoid that aborting a command triggers a kernel warning Bill Kuzeja (1): scsi: qla2xxx: Fix extraneous ref on sp's after adapter break Bob Moore (1): ACPICA: Disassembler: Abort on an invalid/unknown AML opcode Boris Brezillon (1): mtd: nand: gpmi: Fix gpmi_nand_init() error path Bryan O'Donoghue (1): clk: Fix __set_clk_rates error print-string Chaitra P B (1): scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. Chris Wilson (1): e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails Christian Lamparter (2): ARM: dts: qcom: ipq4019: fix i2c_0 node net: emac: fix reset timeout with AR8035 phy Christoph Hellwig (1): PCI/msi: fix the pci_alloc_irq_vectors_affinity stub Christophe JAILLET (4): SMB2: Fix share type handling ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path EDAC, mv64x60: Fix an error handling path Christophe Jaillet (1): cpuidle: dt: Add missing 'of_node_put()' Christophe Leroy (1): powerpc/8xx: fix mpc8xx_get_irq() return on no irq Colin Ian King (4): netxen_nic: set rcode to the return status from the call to netxen_issue_cmd btrfs: fix incorrect error return ret being passed to mapping_set_error ath5k: fix memory leak on buf on failed eeprom read wl1251: check return from call to wl1251_acx_arp_ip_filter Dan Carpenter (10): ipmi_ssif: unlock on allocation failure drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests PowerCap: Fix an error code in powercap_register_zone() perf/core: Fix error handling in perf_event_alloc() block: fix an error code in add_partition() libceph: NULL deref on crush_decode() error path pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() drm/amdkfd: NULL dereference involving create_process() cxl: Unlock on error in probe X.509: Fix error code in x509_cert_parse() Daniel Bristot de Oliveira (1): sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks Dmitry Monakhov (1): bio-integrity: Do not allocate integrity context for bio w/o data Dmitry Torokhov (1): Input: elan_i2c - check if device is there before really probing Doug Berger (2): bus: brcmstb_gisb: Use register offsets with writes too bus: brcmstb_gisb: correct support for 64-bit address output Emmanuel Grumbach (1): iwlwifi: mvm: fix firmware debug restart recording Eric Dumazet (1): tcp: better validation of received ack sequences Eric W. Biederman (3): signal/metag: Document a conflict with SI_USER with SIGFPE signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP signal/arm: Document conflicts with SI_USER and SIGFPE Eryu Guan (1): ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() Fabio Estevam (3): ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin ARM: dts: imx6qdl-wandboard: Fix audio channel swap net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272 Firo Yang (1): hdlcdrv: Fix divide by zero in hdlcdrv_ioctl Florian Westphal (1): netfilter: conntrack: don't call iter for non-confirmed conntracks Ganapatrao Kulkarni (1): arm64: perf: Ignore exclude_hv when kernel is running in HYP Ganesh Goudar (1): cxgb4: fix incorrect cim_la output for T6 Gary Bisson (1): rtc: m41t80: fix SQW dividers override when setting a date Geert Uytterhoeven (5): clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 serial: sh-sci: Fix race condition causing garbage during shutdown sh_eth: Use platform device for printing before register_netdev() ACPI: EC: Fix debugfs_create_*() usage ARM: dts: armadillo800eva: Split LCD mux and gpio Girish Moodalbail (1): geneve: add missing rx stats accounting Grygorii Strashko (1): net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control Guoqing Jiang (1): md-cluster: fix potential lock issue in add_new_disk Gustavo A. R. Silva (2): PM / devfreq: Fix potential NULL pointer dereference in governor_store net: freescale: fix potential null pointer dereference Haim Dreyfuss (1): iwlwifi: mvm: Fix command queue number on d0i3 flow Haishuang Yan (1): sit: reload iphdr in ipip6_rcv Hangbin Liu (1): l2tp: fix missing print session offset info Hans de Goede (6): gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs ACPI / video: Default lcd_only to true on Win8-ready and newer machines ASoC: Intel: cht_bsw_rt5645: Analog Mic support pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices Input: goodix - disable IRQs while suspended Heiko Carstens (1): s390: move _text symbol to address higher than zero Heiner Kallweit (1): pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 Holger Brunck (4): net/wan/fsl_ucc_hdlc: fix unitialized variable warnings net/wan/fsl_ucc_hdlc: fix incorrect memory allocation fsl/qe: add bit description for SYNL register for GUMR net/wan/fsl_ucc_hdlc: fix muram allocation error Ido Schimmel (1): mlxsw: spectrum: Avoid possible NULL pointer dereference Ido Shamay (1): net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport Ihar Hrachyshka (2): neighbour: update neigh timestamps iff update is effective arp: honour gratuitous ARP _replies_ Ivan Mikhaylov (1): powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] J. Bruce Fields (1): lockd: fix lockd shutdown race Jacob Keller (2): e1000e: fix race condition around skb_tstamp_tx() igb: fix race condition with PTP_TX_IN_PROGRESS bits Jag Raman (1): sparc64: ldc abort during vds iso boot James Morse (2): KVM: arm: Restore banked registers and physical timer access on hyp_panic() KVM: arm64: Restore host physical timer access on hyp_panic() James Wang (1): Fix loop device flush before configure v3 Jan H. SchÃ¶nherr (1): KVM: nVMX: Fix handling of lmsw instruction Jason A. Donenfeld (2): skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow macsec: check return value of skb_to_sgvec always Jason Yan (2): scsi: libsas: fix memory leak in sas_smp_get_phy_events() scsi: libsas: fix error when getting phy events Jesper Dangaard Brouer (1): mlx5: fix bug reading rss_hash_type from CQE Jesse Brandeburg (1): i40evf: fix merge error in older patch Jia-Ju Bai (2): qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M mISDN: Fix a sleep-in-atomic bug Jim Baxter (1): net: cdc_ncm: Fix TX zero padding Jim Mattson (1): KVM: nVMX: Update vmcs12->guest_linear_address on nested VM-exit Jiri Olsa (2): perf trace: Add mmap alias for s390 perf tools: Fix copyfile_offset update of output offset Jisheng Zhang (1): usb: chipidea: properly handle host or gadget initialization failure Johannes Berg (2): cfg80211: make RATE_INFO_BW_20 the default iwlwifi: tt: move ucode_loaded check under mutex Johannes Thumshirn (1): scsi: sg: don't return bogus Sg_requests Jon Mason (1): mdio: mux: Correct mdio_mux_init error path issues Jordan Crouse (1): drm/msm: Take the mutex before calling msm_gem_new_impl Josh Poimboeuf (1): x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() Julia Cartwright (1): md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock Julia Lawall (1): mdio: mux: fix device_node_continue.cocci warnings KT Liao (2): Input: elantech - force relative mode on a certain module Input: elan_i2c - clear INT before resetting controller Karicheri, Muralidharan (1): hsr: fix incorrect warning Kees Cook (4): x86/boot: Declare error() as noreturn bna: Avoid reading past end of buffer qlge: Avoid reading past end of buffer ray_cs: Avoid reading past end of buffer Kirill Tkhai (1): pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() Konstantin Khlebnikov (1): ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors Kuninori Morimoto (1): ASoC: rsnd: SSI PIO adjust to 24bit mode Leonard Crestez (2): net: phy: micrel: Restore led_mode and clk_sel on resume ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull Liam McBirnie (1): ip6_tunnel: fix traffic class routing for tunnels Lin Zhang (1): net: ieee802154: fix net_device reference release too early Linus Walleij (1): gpio: label descriptors using the device name Liping Zhang (1): netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize Lorenzo Bianconi (1): iio: magnetometer: st_magn_spi: fix spi_device_id table Luca Coelho (3): mac80211: bail out from prep_connection() if a reconfig is ongoing iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 Lv Zheng (2): ACPICA: OSL: Add support to exclude stdarg.h ACPICA: Events: Add runtime stub support for event APIs MaJun (1): irqchip/mbigen: Fix the clear register offset calculation Maciej Purski (1): hwmon: (ina2xx) Make calibration register value fixed Maciej S. Szmigiero (1): watchdog: f71808e_wdt: Add F71868 support Mahesh Bandewar (1): ipv6: avoid dad-failures for addresses with NODAD Marcel Holtmann (1): Bluetooth: Send HCI Set Event Mask Page 2 command only when needed Marcin Nowakowski (3): MIPS: mm: fixed mappings: correct initialisation MIPS: mm: adjust PKMAP location MIPS: kprobes: flush_insn_slot should flush only if probe initialised Mario Molitor (1): stmmac: fix ptp header for GMAC3 hw timestamp Martin Blumenstingl (1): clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 Masahiro Yamada (1): mtd: nand: check ecc->total sanity in nand_scan_tail Masami Hiramatsu (2): kprobes/x86: Fix to set RWX bits correctly before releasing trampoline perf probe: Add warning message if there is unexpected event name Matthias Kaehlcke (1): x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility Maurizio Lombardi (1): scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() Mauro Carvalho Chehab (1): media: videobuf2-core: don't go out of the buffer range Maxime Ripard (2): drm/sun4i: Ignore the generic connectors for components dt-bindings: display: sun4i: Add allwinner,tcon-channel property Michael Ellerman (4): powerpc/modules: If mprofile-kernel is enabled add it to vermagic powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash selftests/powerpc: Fix TM resched DSCR test with some compilers powerpc/spufs: Fix coredump of SPU contexts Michael Schmitz (1): fix race in drivers/char/random.c:get_reg() MickaÃ«l SalaÃ¼n (1): selftests: kselftest_harness: Fix compile warning Mike Marciniszyn (1): IB/rdmavt: Allocate CQ memory on the correct node Mikko Koivunen (1): iio: light: rpr0521 poweroff for probe fails Miklos Szeredi (1): ovl: filter trusted xattr for non-admin Milian Wolff (2): perf report: Fix off-by-one for non-activation frames perf report: Ensure the perf DSO mapping matches what libdw sees Ming Lei (3): blk-mq: fix race between updating nr_hw_queues and switching io sched nvme: fix hang in remove path blk-mq: fix kernel oops in blk_mq_tag_idle() Mintz, Yuval (1): bnx2x: Allow vfs to disable txvlan offload Miquel Raynal (1): mtd: mtd_oobtest: Handle bitflips during reads Moni Shoua (1): net/mlx4_en: Change default QoS settings Namhyung Kim (3): perf header: Set proper module name when build-id event found perf tools: Decompress kernel module when reading DSO data perf tests: Decompress kernel module before objdump Neil Horman (1): vmxnet3: ensure that adapter is in proper state during force_close NeilBrown (2): VFS: close race between getcwd() and d_move() SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() Netanel Belgazal (5): net: ena: fix rare uncompleted admin command false alarm net: ena: fix race condition between submit and completion admin command net: ena: add missing return when ena_com_get_io_handlers() fails net: ena: add missing unmap bars on device removal net: ena: disable admin msix while working in polling mode Nicholas Mc Guire (1): iio: pressure: zpa2326: report interrupted case as failure Nikita Yushchenko (2): iio: hi8435: avoid garbage event at first enable iio: hi8435: cleanup reset gpio Nithin Sujir (1): bonding: Don't update slave->link until ready to commit Pan Bian (3): rtc: snvs: fix an incorrect check of return value usb: dwc3: keystone: check return value [media] cx25840: fix unchecked return values Pardha Saradhi K (1): ASoC: Intel: Skylake: Disable clock gating during firmware and library download Paul Mackerras (1): KVM: PPC: Book3S PR: Check copy_to/from_user return values Peter GroÃŸe (1): mac80211: Fix setting TX power on monitor interfaces Peter Rosin (1): i2c: mux: reg: put away the parent i2c adapter on probe failure Peter Zijlstra (2): x86/tsc: Provide 'tsc=unstable' boot parameter perf/core: Correct event creation with PERF_FORMAT_GROUP Petr Cvek (1): [media] pxa_camera: fix module remove codepath for v4l2 clock Pieter \"PoroCYon\" Sluys (1): vfb: fix video mode and line_length being set when loaded Rabin Vincent (2): ubi: fastmap: Fix slab corruption CIFS: silence lockdep splat in cifs_relock_file() Rafael David Tinoco (1): scsi: libiscsi: Allow sd_shutdown on bad transport Raju Rangoju (1): RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers Rakesh Pandit (1): nvme-pci: fix multiple ctrl removal scheduling Ram Amrani (1): qed: Correct doorbell configuration for !4Kb pages Rasmus Villemoes (1): ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node Reza Arbab (1): mm, vmstat: Remove spurious WARN() during zoneinfo print Robert Jarzmik (2): backlight: tdo24m: Fix the SPI CS between transfers tags: honor COMPILED_SOURCE with apart output directory Robin Murphy (1): coresight: tmc: Configure DMA mask appropriately Roman Kapl (1): net: move somaxconn init from sysctl code Roman Pen (1): KVM: SVM: do not zero out segment attributes if segment is unusable or not present Roopa Prabhu (1): vxlan: dont migrate permanent fdb entries during learn Russell King (1): net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support Sai Praneeth (1): x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map Shanker Donthineni (1): irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry Shiraz Saleem (2): i40iw: Fix sequence number for the first partial FPDU i40iw: Correct Q1/XF object count equation Sowmini Varadhan (1): rds; Reset rs->rs_bound_addr in rds_add_bound() failure path Stanislaw Gruszka (1): rt2x00: do not pause queue unconditionally on error path Stefan Agner (1): ASoC: simple-card: fix mic jack initialization Stefan Haberland (1): s390/dasd: fix hanging safe offline Stefan Wahren (1): net: qca_spi: Fix alignment issues in rx path Steffen Klassert (1): af_key: Fix slab-out-of-bounds in pfkey_compile_policy. Stephen Smalley (1): selinux: do not check open permission on sockets Steven L. Roberts (1): RDMA/hfi1: fix array termination by appending NULL to attr array Sudeep Holla (1): clk: scpi: fix return type of __scpi_dvfs_round_rate Sudip Mukherjee (1): backlight: Report error on failure Sugar Zhang (1): ARM: dts: rockchip: fix rk322x i2s1 pinctrl error Suman Anna (2): uio: fix incorrect memory leak cleanup ARM: davinci: da8xx: Create DSP device only when assigned memory Suzuki K Poulose (1): coresight: Fix reference count for software sources Talat Batheesh (2): net/mlx4_en: Avoid adding steering rules with invalid ring net/mlx4: Fix the check in attaching steering rules Tang Junhui (2): bcache: stop writeback thread after detaching bcache: segregate flash only volume write streams Tariq Toukan (1): net/mlx5: Tolerate irq_set_affinity_hint() failures Tero Kristo (2): crypto: omap-sham - buffer handling fixes for hashing later crypto: omap-sham - fix closing of hash with separate finalize call Thomas Bogendoerfer (1): Fix serial console on SNI RM400 machines Thomas Gleixner (1): cpuhotplug: Link lock stacks for hotplug callbacks Thomas Petazzoni (1): ata: libahci: properly propagate return value of platform_get_irq() Thomas Winter (1): ipmr: vrf: Find VIFs using the actual device Timmy Li (1): ARM64: PCI: Fix struct acpi_pci_root_ops allocation failure path Tin Huynh (1): leds: pca955x: Correct I2C Functionality Tomi Valkeinen (1): drm/omap: fix tiled buffer stride calculations Tony Lindgren (1): tty: n_gsm: Allow ADM response in addition to UA for control dlci Trond Myklebust (2): NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION NFSv4.1: Work around a Linux server bug... Vaibhav Jain (2): rtc: opal: Handle disabled TPO in opal_get_tpo_time() rtc: interface: Validate alarm-time before handling rollover Varun Prakash (1): scsi: csiostor: fix use after free in csio_hw_use_fwconfig() Vignesh R (1): serial: 8250: omap: Disable DMA for console UART Vlastimil Babka (1): sched/numa: Use down_read_trylock() for the mmap_sem Wanpeng Li (1): KVM: X86: Fix preempt the preemption timer cancel Wen Xiong (1): blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op Will Deacon (2): perf/callchain: Force USER_DS when invoking perf_callchain_user() arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage Willem de Bruijn (1): skbuff: only inherit relevant tx_flags Xin Long (1): sctp: fix recursive locking warning in sctp_do_peeloff Yi Zeng (1): thermal: power_allocator: fix one race condition issue for thermal_instances list chenxiang (1): scsi: libsas: initialize sas_phy status according to response of DISCOVER linzhang (2): net: x25: fix one potential use-after-free issue net: llc: add lock_sock in llc_ui_bind to avoid a race condition sudarsana.kalluru(a)cavium.com (1): qed: Fix overriding of supported autoneg value. .../bindings/clock/amlogic,meson8b-clkc.txt | 11 ++- .../bindings/display/sunxi/sun4i-drm.txt | 11 ++- arch/arm/boot/dts/imx53-qsrb.dts | 2 +- arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 1 + arch/arm/boot/dts/ls1021a.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 +- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 + arch/arm/boot/dts/rk322x.dtsi | 6 +- arch/arm/include/asm/xen/events.h | 2 +- arch/arm/include/uapi/asm/siginfo.h | 13 +++ arch/arm/kvm/hyp/switch.c | 2 + arch/arm/mach-davinci/devices-da8xx.c | 10 +++ arch/arm/mach-imx/cpu.c | 3 + arch/arm/mach-imx/mxc.h | 6 ++ arch/arm/vfp/vfpmodule.c | 2 +- arch/arm64/include/asm/futex.h | 8 +- arch/arm64/kernel/pci.c | 4 +- arch/arm64/kernel/perf_event.c | 23 +++-- arch/arm64/kvm/hyp/switch.c | 1 + arch/arm64/mm/mmap.c | 19 +++-- arch/metag/include/uapi/asm/siginfo.h | 7 ++ arch/metag/kernel/traps.c | 2 +- arch/mips/include/asm/kprobes.h | 3 +- arch/mips/include/asm/pgtable-32.h | 7 +- arch/mips/mm/pgtable-32.c | 6 +- arch/powerpc/include/asm/module.h | 4 + arch/powerpc/include/asm/page.h | 12 +++ arch/powerpc/include/uapi/asm/siginfo.h | 15 ++++ arch/powerpc/kernel/time.c | 14 +++- arch/powerpc/kernel/traps.c | 10 +-- arch/powerpc/kvm/book3s_pr_papr.c | 34 ++++++-- arch/powerpc/platforms/cell/spufs/coredump.c | 2 + arch/powerpc/sysdev/mpc8xx_pic.c | 2 +- arch/s390/kernel/vmlinux.lds.S | 8 +- arch/sparc/kernel/ldc.c | 7 +- arch/x86/boot/compressed/error.h | 4 +- arch/x86/include/asm/asm.h | 1 + arch/x86/kernel/kprobes/core.c | 9 ++ arch/x86/kernel/tsc.c | 2 + arch/x86/kvm/lapic.c | 2 + arch/x86/kvm/svm.c | 24 +++--- arch/x86/kvm/vmx.c | 10 ++- arch/x86/lib/csum-copy_64.S | 12 +-- arch/x86/lib/kaslr.c | 3 +- arch/x86/platform/efi/efi.c | 6 +- block/bio-integrity.c | 3 + block/blk-mq.c | 11 ++- block/partition-generic.c | 4 +- crypto/asymmetric_keys/x509_cert_parser.c | 1 + crypto/async_tx/async_pq.c | 5 +- drivers/acpi/acpi_video.c | 14 +++- drivers/acpi/acpica/evxfevnt.c | 18 ++++ drivers/acpi/acpica/psobject.c | 14 ++++ drivers/acpi/ec.c | 2 +- drivers/acpi/ec_sys.c | 2 +- drivers/acpi/internal.h | 2 +- drivers/ata/libahci_platform.c | 5 +- drivers/block/loop.c | 3 + drivers/bus/brcmstb_gisb.c | 42 +++++----- drivers/char/ipmi/ipmi_ssif.c | 2 + drivers/char/random.c | 6 +- drivers/clk/at91/clk-generated.c | 3 +- drivers/clk/clk-conf.c | 2 +- drivers/clk/clk-scpi.c | 6 +- drivers/clk/meson/Kconfig | 6 +- drivers/clk/meson/meson8b.c | 5 +- drivers/clk/renesas/clk-rcar-gen2.c | 23 ++++- drivers/cpuidle/dt_idle_states.c | 4 +- drivers/crypto/omap-sham.c | 31 ++++--- drivers/devfreq/devfreq.c | 3 +- drivers/dma/imx-sdma.c | 23 +++-- drivers/edac/mv64x60_edac.c | 2 +- drivers/gpio/gpio-crystalcove.c | 54 ++++++++---- drivers/gpio/gpiolib.c | 3 +- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 3 +- drivers/gpu/drm/msm/msm_gem.c | 6 ++ drivers/gpu/drm/omapdrm/omap_gem.c | 4 +- drivers/gpu/drm/sun4i/sun4i_drv.c | 12 +++ drivers/gpu/drm/vc4/vc4_gem.c | 13 +-- drivers/hid/i2c-hid/i2c-hid.c | 13 +++ drivers/hwmon/ina2xx.c | 87 +++++++++++-------- drivers/hwtracing/coresight/coresight-tmc.c | 7 ++ drivers/hwtracing/coresight/coresight.c | 15 +++- drivers/i2c/muxes/i2c-mux-reg.c | 17 ++-- drivers/iio/adc/hi8435.c | 27 ++++-- drivers/iio/light/rpr0521.c | 17 +++- drivers/iio/magnetometer/st_magn_spi.c | 2 - drivers/iio/pressure/zpa2326.c | 18 ++-- drivers/infiniband/hw/cxgb4/cm.c | 6 +- drivers/infiniband/hw/hfi1/sysfs.c | 3 +- drivers/infiniband/hw/i40iw/i40iw_ctrl.c | 6 +- drivers/infiniband/hw/i40iw/i40iw_d.h | 1 + drivers/infiniband/hw/i40iw/i40iw_puda.c | 2 +- drivers/infiniband/sw/rdmavt/cq.c | 10 ++- drivers/infiniband/ulp/srpt/ib_srpt.c | 9 +- drivers/input/mouse/elan_i2c_core.c | 7 ++ drivers/input/mouse/elan_i2c_i2c.c | 9 +- drivers/input/mouse/elantech.c | 11 +++ drivers/input/touchscreen/goodix.c | 8 +- drivers/irqchip/irq-gic-v3.c | 11 +++ drivers/irqchip/irq-mbigen.c | 5 +- drivers/isdn/mISDN/stack.c | 2 +- drivers/leds/leds-pca955x.c | 2 +- drivers/md/bcache/alloc.c | 19 +++-- drivers/md/bcache/super.c | 6 ++ drivers/md/md-cluster.c | 4 +- drivers/md/raid5.c | 17 ++-- drivers/media/i2c/cx25840/cx25840-core.c | 36 ++++---- drivers/media/platform/pxa_camera.c | 14 +++- drivers/media/rc/mceusb.c | 9 +- drivers/media/v4l2-core/videobuf2-core.c | 4 + drivers/misc/cxl/flash.c | 8 +- drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++- drivers/mmc/host/sdhci-pci-core.c | 2 + drivers/mmc/host/sdhci.c | 7 ++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 ++- drivers/mtd/nand/nand_base.c | 5 ++ drivers/mtd/tests/oobtest.c | 21 +++++ drivers/mtd/ubi/fastmap.c | 33 +++++++- drivers/net/bonding/bond_main.c | 11 ++- drivers/net/ethernet/amazon/ena/ena_com.c | 35 ++++---- drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 +++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 ++++- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 11 +++ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 32 ++++++- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 23 +++-- drivers/net/ethernet/freescale/fec_main.c | 4 + drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 +- drivers/net/ethernet/ibm/emac/core.c | 26 +++++- drivers/net/ethernet/intel/e1000e/netdev.c | 17 +++- .../net/ethernet/intel/i40evf/i40evf_virtchnl.c | 1 + drivers/net/ethernet/intel/igb/igb_ptp.c | 12 ++- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 ++ drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 ++ drivers/net/ethernet/mellanox/mlx4/mcg.c | 15 +++- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + drivers/net/ethernet/mellanox/mlx4/qp.c | 19 +++++ .../net/ethernet/mellanox/mlx4/resource_tracker.c | 16 ++-- drivers/net/ethernet/mellanox/mlx5/core/main.c | 14 +--- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 +- .../net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_dev.c | 5 +- drivers/net/ethernet/qlogic/qed/qed_main.c | 6 +- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 1 + drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +- drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 +- drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++- drivers/net/ethernet/renesas/sh_eth.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 3 +- drivers/net/ethernet/ti/cpsw.c | 16 ++++ drivers/net/geneve.c | 36 +++++--- drivers/net/hamradio/hdlcdrv.c | 2 + drivers/net/macsec.c | 13 ++- drivers/net/phy/mdio-mux.c | 11 +-- drivers/net/phy/micrel.c | 42 ++++++---- drivers/net/phy/phy.c | 6 ++ drivers/net/usb/cdc_ncm.c | 11 ++- drivers/net/vmxnet3/vmxnet3_drv.c | 5 ++ drivers/net/vxlan.c | 2 +- drivers/net/wan/fsl_ucc_hdlc.c | 18 ++-- drivers/net/wireless/ath/ath10k/bmi.h | 2 + drivers/net/wireless/ath/ath10k/core.c | 16 +++- drivers/net/wireless/ath/ath5k/debug.c | 5 +- drivers/net/wireless/intel/iwlwifi/iwl-7000.c | 4 +- drivers/net/wireless/intel/iwlwifi/iwl-8000.c | 4 +- drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 12 +-- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 32 +++++-- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 8 +- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 6 +- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 22 +++-- drivers/net/wireless/ray_cs.c | 7 +- drivers/net/wireless/ti/wl1251/main.c | 3 +- drivers/nvme/host/core.c | 4 + drivers/nvme/host/pci.c | 13 ++- drivers/pinctrl/intel/pinctrl-baytrail.c | 6 ++ drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 1 - drivers/powercap/powercap_sys.c | 1 + drivers/rtc/interface.c | 9 +- drivers/rtc/rtc-m41t80.c | 12 +++ drivers/rtc/rtc-opal.c | 10 +++ drivers/rtc/rtc-snvs.c | 2 +- drivers/s390/block/dasd.c | 8 +- drivers/scsi/bnx2fc/bnx2fc.h | 1 + drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 ++- drivers/scsi/csiostor/csio_hw.c | 5 +- drivers/scsi/libiscsi.c | 24 +++++- drivers/scsi/libsas/sas_expander.c | 4 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 ++++--- drivers/scsi/qla2xxx/qla_os.c | 8 +- drivers/scsi/sg.c | 5 +- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- drivers/thermal/power_allocator.c | 2 + drivers/tty/n_gsm.c | 17 +++- drivers/tty/serial/8250/8250_omap.c | 4 + drivers/tty/serial/sccnxp.c | 15 ++-- drivers/tty/serial/sh-sci.c | 16 +++- drivers/uio/uio.c | 8 +- drivers/usb/chipidea/core.c | 29 +++++-- drivers/usb/dwc3/dwc3-keystone.c | 4 + drivers/usb/storage/ene_ub6250.c | 11 ++- drivers/video/backlight/backlight.c | 15 ++-- drivers/video/backlight/corgi_lcd.c | 2 +- drivers/video/backlight/tdo24m.c | 2 +- drivers/video/backlight/tosa_lcd.c | 2 +- drivers/video/fbdev/vfb.c | 17 ++++ drivers/watchdog/Kconfig | 7 +- drivers/watchdog/f71808e_wdt.c | 27 ++++-- fs/btrfs/extent_io.c | 2 +- fs/cifs/file.c | 2 +- fs/cifs/smb2pdu.c | 14 ++-- fs/dcache.c | 23 +++-- fs/ext4/file.c | 2 +- fs/ext4/mballoc.c | 23 +++-- fs/lockd/svc.c | 6 +- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + fs/nfs/nfs4proc.c | 13 ++- fs/nfs/nfs4state.c | 10 ++- fs/overlayfs/dir.c | 3 + fs/overlayfs/inode.c | 12 ++- include/acpi/platform/acgcc.h | 10 +++ include/acpi/platform/acintel.h | 2 + include/linux/mlx4/qp.h | 1 + include/linux/mlx5/device.h | 10 ++- include/linux/pci.h | 6 +- include/linux/sched.h | 1 + include/linux/skbuff.h | 8 +- include/net/cfg80211.h | 2 +- include/net/x25.h | 4 +- include/soc/fsl/qe/qe.h | 4 + kernel/cpu.c | 13 +++ kernel/events/callchain.c | 6 ++ kernel/events/core.c | 19 +++-- kernel/kprobes.c | 2 +- kernel/pid.c | 4 +- kernel/sched/core.c | 2 + kernel/sched/deadline.c | 98 +++++++++++++++++++--- kernel/sched/fair.c | 3 +- mm/vmstat.c | 2 - net/bluetooth/hci_core.c | 17 +++- net/ceph/osdmap.c | 1 + net/core/neighbour.c | 14 +++- net/core/net_namespace.c | 19 +++++ net/core/skbuff.c | 75 +++++++++++------ net/core/sysctl_net_core.c | 2 - net/hsr/hsr_forward.c | 3 +- net/hsr/hsr_framereg.c | 9 +- net/hsr/hsr_framereg.h | 2 +- net/ieee802154/socket.c | 8 +- net/ipv4/arp.c | 16 +++- net/ipv4/ipmr.c | 18 +++- net/ipv4/tcp_input.c | 24 +++--- net/ipv6/addrconf.c | 5 +- net/ipv6/ip6_tunnel.c | 3 + net/ipv6/sit.c | 1 + net/key/af_key.c | 2 +- net/l2tp/l2tp_netlink.c | 2 + net/llc/af_llc.c | 3 + net/mac80211/cfg.c | 28 ++++++- net/mac80211/driver-ops.h | 3 +- net/mac80211/mlme.c | 4 + net/netfilter/nf_conntrack_core.c | 39 ++++++--- net/netfilter/nf_conntrack_netlink.c | 7 +- net/rds/bind.c | 1 + net/sctp/socket.c | 4 +- net/sunrpc/xprtsock.c | 7 +- net/x25/af_x25.c | 24 ++++-- net/x25/sysctl_net_x25.c | 5 +- net/xfrm/xfrm_state.c | 2 + scripts/tags.sh | 1 + security/selinux/hooks.c | 10 ++- sound/soc/generic/simple-card.c | 2 +- sound/soc/intel/atom/sst/sst_stream.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 7 ++ sound/soc/intel/skylake/skl-messages.c | 4 + sound/soc/intel/skylake/skl-pcm.c | 4 + sound/soc/sh/rcar/ssi.c | 11 ++- tools/perf/builtin-trace.c | 4 + tools/perf/tests/code-reading.c | 20 ++++- tools/perf/util/dso.c | 16 ++++ tools/perf/util/header.c | 12 ++- tools/perf/util/probe-event.c | 8 ++ tools/perf/util/unwind-libdw.c | 14 +++- tools/perf/util/unwind-libunwind-local.c | 11 +++ tools/perf/util/util.c | 2 +- .../testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +- 290 files changed, 2202 insertions(+), 734 deletions(-) create mode 100644 arch/arm/include/uapi/asm/siginfo.h -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAlrFwQYACgkQ3qZv95d3 LNwHNw/8Da5DuTiz1qiY+9wkyTYGYSZzeJSELDIqpjmc3Xq9MaZ0Bfe2IVWgaoq1 mXQF1PFRXGwE1A3CPpGBhatMYueJV6dEFT8nfzvl/tBidpUbIDGOfEjVB5qEZ5CU WgpQHQshAimImG7qz6pRTYbVzoYOQBoBgVNFnaJhaja9D+1dfF6FXRCgz/6EYFW5 iq/VdmjYl2TKVaA1LkOV52LvJHsItRoP3uIGwPEYGAN6yaEo83f46fE3DIwENVcS AZAvm8o1V/lqP9QZyS+iRmwZj7v3OEaBOAooEEYZI0e+JMdKkJCvT9ShVdB9iVgt tfto+mpyWo2x0becNh9+PWGyNaLTSC9Y0956kTHdR7iBGgptOsjLxXC8MEWrSz0j VXjVn3obknVNLOdi/P8dYMkPkXIXbWr1GeZ0r5JeS8bvReZ4fuZq//SPiJKDU0bh ZNtxu7h/qNasKiA0PlP7i9P0fo+lyY1uE8vKFKAYL2BXRgRwb7CaNxsi5XkJdRPk tE5mqq822n/9PpM/GMn5lfw4HxFVGyeKKVZBSxoiI5iF0Tv6bEiivDoa+jtxng1o gqLrTThcmNE9yqGbAVTCE0SRM0WK52xkHHDL2KnjawyAYIFL+3F/Md7gyygUjQTK hgq7rX0WaH4ecTFhjYKZAh22rNU/mC05dC63DZprFPJuHLuQowg= =STwM -----END PGP SIGNATURE-----

7 years, 2 months

2
1
0 0

Linux 3.18.104

by Greg KH

I'm announcing the release of the 3.18.104 kernel. Only users who had build errors in 3.18.103 need to upgrade, this is a single-bugfix-only release. The updated 3.18.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.18.y and can be browsed at the normal kernel.org git web browser: http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Makefile | 2 +- drivers/net/ethernet/freescale/fec_main.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) Greg Kroah-Hartman (2): net: fec: fix build error in fec driver Linux 3.18.104

7 years, 2 months

2
3
0 0

[PATCH] xhci: Fix USB ports for Dell Inspiron 5775

by Kai-Heng Feng

The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable(a)vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- drivers/usb/host/xhci-pci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index d9f831b67e57..93ce34bce7b5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -126,7 +126,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; - if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb) + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || + pdev->device == 0x15e1 || + pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; if (pdev->vendor == PCI_VENDOR_ID_AMD) -- 2.15.1

7 years, 2 months

3
2
0 0

Patch "virtio_net: check return value of skb_to_sgvec always" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled virtio_net: check return value of skb_to_sgvec always to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: virtio_net-check-return-value-of-skb_to_sgvec-always.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e2fcad58fd230f635a74e4e983c6f4ea893642d2 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:26 +0200 Subject: virtio_net: check return value of skb_to_sgvec always From: Jason A. Donenfeld <Jason(a)zx2c4.com> commit e2fcad58fd230f635a74e4e983c6f4ea893642d2 upstream. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov(a)cogentembedded.com> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/virtio_net.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -831,7 +831,7 @@ static int xmit_skb(struct send_queue *s struct virtio_net_hdr_mrg_rxbuf *hdr; const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest; struct virtnet_info *vi = sq->vq->vdev->priv; - unsigned num_sg; + int num_sg; unsigned hdr_len = vi->hdr_len; bool can_push; @@ -858,11 +858,16 @@ static int xmit_skb(struct send_queue *s if (can_push) { __skb_push(skb, hdr_len); num_sg = skb_to_sgvec(skb, sq->sg, 0, skb->len); + if (unlikely(num_sg < 0)) + return num_sg; /* Pull header back to avoid skew in tx bytes calculations. */ __skb_pull(skb, hdr_len); } else { sg_set_buf(sq->sg, hdr, hdr_len); - num_sg = skb_to_sgvec(skb, sq->sg + 1, 0, skb->len) + 1; + num_sg = skb_to_sgvec(skb, sq->sg + 1, 0, skb->len); + if (unlikely(num_sg < 0)) + return num_sg; + num_sg++; } return virtqueue_add_outbuf(sq->vq, sq->sg, num_sg, skb, GFP_ATOMIC); } Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-4.9/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.9/rxrpc-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/virtio_net-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/macsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/virtio_net-check-return-value-of-skb_to_sgvec-in-one-more-location.patch

7 years, 2 months

1
0
0 0

Patch "rxrpc: check return value of skb_to_sgvec always" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rxrpc: check return value of skb_to_sgvec always to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rxrpc-check-return-value-of-skb_to_sgvec-always.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 89a5ea99662505d2d61f2a3030a6896c2cb3cdb0 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:24 +0200 Subject: rxrpc: check return value of skb_to_sgvec always From: Jason A. Donenfeld <Jason(a)zx2c4.com> commit 89a5ea99662505d2d61f2a3030a6896c2cb3cdb0 upstream. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Acked-by: David Howells <dhowells(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/rxrpc/rxkad.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -229,7 +229,9 @@ static int rxkad_secure_packet_encrypt(c len &= ~(call->conn->size_align - 1); sg_init_table(sg, nsg); - skb_to_sgvec(skb, sg, 0, len); + err = skb_to_sgvec(skb, sg, 0, len); + if (unlikely(err < 0)) + goto out; skcipher_request_set_crypt(req, sg, sg, len, iv.x); crypto_skcipher_encrypt(req); @@ -325,7 +327,7 @@ static int rxkad_verify_packet_1(struct struct sk_buff *trailer; u32 data_size, buf; u16 check; - int nsg; + int nsg, ret; _enter(""); @@ -342,7 +344,9 @@ static int rxkad_verify_packet_1(struct goto nomem; sg_init_table(sg, nsg); - skb_to_sgvec(skb, sg, offset, 8); + ret = skb_to_sgvec(skb, sg, offset, 8); + if (unlikely(ret < 0)) + return ret; /* start the decryption afresh */ memset(&iv, 0, sizeof(iv)); @@ -405,7 +409,7 @@ static int rxkad_verify_packet_2(struct struct sk_buff *trailer; u32 data_size, buf; u16 check; - int nsg; + int nsg, ret; _enter(",{%d}", skb->len); @@ -429,7 +433,12 @@ static int rxkad_verify_packet_2(struct } sg_init_table(sg, nsg); - skb_to_sgvec(skb, sg, offset, len); + ret = skb_to_sgvec(skb, sg, offset, len); + if (unlikely(ret < 0)) { + if (sg != _sg) + kfree(sg); + return ret; + } /* decrypt from the session key */ token = call->conn->params.key->payload.data[0]; Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-4.9/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.9/rxrpc-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/virtio_net-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/macsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/virtio_net-check-return-value-of-skb_to_sgvec-in-one-more-location.patch

7 years, 2 months

1
0
0 0

[PATCH] f2fs: don't use GFP_ZERO for page caches

by Jaegeuk Kim

From: Chao Yu <yuchao0(a)huawei.com> Related to https://lkml.org/lkml/2018/4/8/661 Sometimes, we need to write meta data to new allocated block address, then we will allocate a zeroed page in inner inode's address space, and fill partial data in it, and leave other place with zero value which means some fields are initial status. There are two inner inodes (meta inode and node inode) setting __GFP_ZERO, I have just checked them, for both of them, we can avoid using __GFP_ZERO, and do initialization by ourselves to avoid unneeded/redundant zeroing from mm. Cc: <stable(a)vger.kernel.org> Signed-off-by: Chao Yu <yuchao0(a)huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> --- fs/f2fs/inode.c | 4 ++-- fs/f2fs/node.c | 6 ++++-- fs/f2fs/node.h | 7 ++----- fs/f2fs/recovery.c | 3 +-- 4 files changed, 9 insertions(+), 11 deletions(-) diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c index 417c9dcd0269..87535bf63421 100644 --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -320,10 +320,10 @@ struct inode *f2fs_iget(struct super_block *sb, unsigned long ino) make_now: if (ino == F2FS_NODE_INO(sbi)) { inode->i_mapping->a_ops = &f2fs_node_aops; - mapping_set_gfp_mask(inode->i_mapping, GFP_F2FS_ZERO); + mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS); } else if (ino == F2FS_META_INO(sbi)) { inode->i_mapping->a_ops = &f2fs_meta_aops; - mapping_set_gfp_mask(inode->i_mapping, GFP_F2FS_ZERO); + mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS); } else if (S_ISREG(inode->i_mode)) { inode->i_op = &f2fs_file_inode_operations; inode->i_fop = &f2fs_file_operations; diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 9a99243054ba..6fc3311820ec 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1096,7 +1096,8 @@ struct page *new_node_page(struct dnode_of_data *dn, unsigned int ofs) set_node_addr(sbi, &new_ni, NEW_ADDR, false); f2fs_wait_on_page_writeback(page, NODE, true); - fill_node_footer(page, dn->nid, dn->inode->i_ino, ofs, true); + memset(F2FS_NODE(page), 0, PAGE_SIZE); + fill_node_footer(page, dn->nid, dn->inode->i_ino, ofs); set_cold_node(page, S_ISDIR(dn->inode->i_mode)); if (!PageUptodate(page)) SetPageUptodate(page); @@ -2311,7 +2312,8 @@ int recover_inode_page(struct f2fs_sb_info *sbi, struct page *page) if (!PageUptodate(ipage)) SetPageUptodate(ipage); - fill_node_footer(ipage, ino, ino, 0, true); + memset(F2FS_NODE(page), 0, PAGE_SIZE); + fill_node_footer(ipage, ino, ino, 0); set_cold_node(page, false); src = F2FS_INODE(page); diff --git a/fs/f2fs/node.h b/fs/f2fs/node.h index b95e49e4a928..42cd081114ab 100644 --- a/fs/f2fs/node.h +++ b/fs/f2fs/node.h @@ -263,15 +263,12 @@ static inline block_t next_blkaddr_of_node(struct page *node_page) } static inline void fill_node_footer(struct page *page, nid_t nid, - nid_t ino, unsigned int ofs, bool reset) + nid_t ino, unsigned int ofs) { struct f2fs_node *rn = F2FS_NODE(page); unsigned int old_flag = 0; - if (reset) - memset(rn, 0, sizeof(*rn)); - else - old_flag = le32_to_cpu(rn->footer.flag); + old_flag = le32_to_cpu(rn->footer.flag); rn->footer.nid = cpu_to_le32(nid); rn->footer.ino = cpu_to_le32(ino); diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c index 1b23d3febe4c..de24f3247aa5 100644 --- a/fs/f2fs/recovery.c +++ b/fs/f2fs/recovery.c @@ -540,8 +540,7 @@ static int do_recover_data(struct f2fs_sb_info *sbi, struct inode *inode, } copy_node_footer(dn.node_page, page); - fill_node_footer(dn.node_page, dn.nid, ni.ino, - ofs_of_node(page), false); + fill_node_footer(dn.node_page, dn.nid, ni.ino, ofs_of_node(page)); set_page_dirty(dn.node_page); err: f2fs_put_dnode(&dn); -- 2.15.0.531.g2ccb3012c9-goog

7 years, 2 months

2
4
0 0

[PATCH 1/1] drm/i915/glk: Add MODULE_FIRMWARE for Geminilake

by ianwmorrison＠gmail.com

From: Ian W MORRISON <ianwmorrison(a)gmail.com> As the Geminilake firmware is now merged to linux-firmware.git use MODUE_FIRMWARE to load the firmware. This removes the error message in the dmesg log: i915 0000:00:02.0: Direct firmware load for i915/glk_dmc_ver1_04.bin failed with error -2 i915 0000:00:02.0: Failed to load DMC firmware i915/glk_dmc_ver1_04.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://01.org/linuxgraphics/downloads/firmware and now shows that the firmware has correctly loaded: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4) Cc: stable(a)vger.kernel.org Signed-off-by: Ian W MORRISON <ianwmorrison(a)gmail.com> --- drivers/gpu/drm/i915/intel_csr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c index 41e6c75a7f3c..f9550ea46c26 100644 --- a/drivers/gpu/drm/i915/intel_csr.c +++ b/drivers/gpu/drm/i915/intel_csr.c @@ -35,6 +35,7 @@ */ #define I915_CSR_GLK "i915/glk_dmc_ver1_04.bin" +MODULE_FIRMWARE(I915_CSR_GLK); #define GLK_CSR_VERSION_REQUIRED CSR_VERSION(1, 4) #define I915_CSR_CNL "i915/cnl_dmc_ver1_07.bin" -- 2.11.0

7 years, 2 months

1
0
0 0

Fwd: [tip:x86/urgent] x86/platform/UV: Fix critical UV MMR address error

by Mike Travis

This was sent to stable(a)vger.kernel.org almost 2 weeks ago and I haven't heard anything back yet. Is there any update on the status? (sorry for the bad formatting, this is the only way I can forward the email. I can only resend the original email before the commit email from Thomas.) Thanks. -------- Forwarded Message -------- Subject: [tip:x86/urgent] x86/platform/UV: Fix critical UV MMR address error Date: Wed, 28 Mar 2018 11:25:04 -0700 From: tip-bot for mike.travis(a)hpe.com <tipbot(a)zytor.com> Reply-To: andrew.banman(a)hpe.com, hpa(a)zytor.com, tglx(a)linutronix.de, mingo(a)kernel.org, russ.anderson(a)hpe.com, travis(a)sgi.com, linux-kernel(a)vger.kernel.org, mike.travis(a)hpe.com, dimitri.sivanich(a)hpe.com To: linux-tip-commits(a)vger.kernel.org CC: dimitri.sivanich(a)hpe.com, mike.travis(a)hpe.com, linux-kernel(a)vger.kernel.org, mingo(a)kernel.org, hpa(a)zytor.com, tglx(a)linutronix.de, andrew.banman(a)hpe.com, russ.anderson(a)hpe.com, travis(a)sgi.com Commit-ID: bd47a85acd727e27b7283daff557865ad04c59f6 Gitweb: https://git.kernel.org/tip/bd47a85acd727e27b7283daff557865ad04c59f6 Author: mike.travis(a)hpe.com <mike.travis(a)hpe.com> AuthorDate: Wed, 28 Mar 2018 12:40:11 -0500 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitDate: Wed, 28 Mar 2018 20:19:45 +0200 x86/platform/UV: Fix critical UV MMR address error A critical error was found testing the fixed UV4 HUB in that an MMR address was found to be incorrect. This causes the virtual address space for accessing the MMIOH1 region to be allocated with the incorrect size. Fixes: 673aa20c55a1 ("x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes") Signed-off-by: Mike Travis <travis(a)sgi.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Dimitri Sivanich <dimitri.sivanich(a)hpe.com> Cc: Russ Anderson <russ.anderson(a)hpe.com> Cc: Andrew Banman <andrew.banman(a)hpe.com> Link: https://lkml.kernel.org/r/20180328174011.041801248@stormcage.americas.sgi.c… --- arch/x86/include/asm/uv/uv_mmrs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index ecb9ddef128f..62c79e26a59a 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -3833,7 +3833,7 @@ union uvh_rh_gam_mmioh_overlay_config0_mmr_u { #define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR uv_undefined("UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR") #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR uv_undefined("UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR") #define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x1603000UL -#define UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x483000UL +#define UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x484000UL #define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR ( \ is_uv1_hub() ? UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR : \ is_uv2_hub() ? UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR : \

7 years, 2 months

2
3
0 0

+ ipc-shm-fix-use-after-free-of-shm-file-via-remap_file_pages.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: ipc/shm: fix use-after-free of shm file via remap_file_pages() has been added to the -mm tree. Its filename is ipc-shm-fix-use-after-free-of-shm-file-via-remap_file_pages.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/ipc-shm-fix-use-after-free-of-shm-… and later at http://ozlabs.org/~akpm/mmotm/broken-out/ipc-shm-fix-use-after-free-of-shm-… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Eric Biggers <ebiggers(a)google.com> Subject: ipc/shm: fix use-after-free of shm file via remap_file_pages() syzbot reported a use-after-free of shm_file_data(file)->file->f_op in shm_get_unmapped_area(), called via sys_remap_file_pages(). Unfortunately it couldn't generate a reproducer, but I found a bug which I think caused it. When remap_file_pages() is passed a full System V shared memory segment, the memory is first unmapped, then a new map is created using the ->vm_file. Between these steps, the shm ID can be removed and reused for a new shm segment. But, shm_mmap() only checks whether the ID is currently valid before calling the underlying file's ->mmap(); it doesn't check whether it was reused. Thus it can use the wrong underlying file, one that was already freed. Fix this by making the "outer" shm file (the one that gets put in ->vm_file) hold a reference to the real shm file, and by making __shm_open() require that the file associated with the shm ID matches the one associated with the "outer" file. Commit 1ac0b6dec656 ("ipc/shm: handle removed segments gracefully in shm_mmap()") almost fixed this bug, but it didn't go far enough because it didn't consider the case where the shm ID is reused. The following program usually reproduces this bug: #include <stdlib.h> #include <sys/shm.h> #include <sys/syscall.h> #include <unistd.h> int main() { int is_parent = (fork() != 0); srand(getpid()); for (;;) { int id = shmget(0xF00F, 4096, IPC_CREAT|0700); if (is_parent) { void *addr = shmat(id, NULL, 0); usleep(rand() % 50); while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0)); } else { usleep(rand() % 50); shmctl(id, IPC_RMID, NULL); } } } It causes the following NULL pointer dereference due to a 'struct file' being used while it's being freed. (I couldn't actually get a KASAN use-after-free splat like in the syzbot report. But I think it's possible with this bug; it would just take a more extraordinary race...) BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 258 Comm: syz_ipc Not tainted 4.16.0-05140-gf8cf2f16a7c95 #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 RIP: 0010:d_inode include/linux/dcache.h:519 [inline] RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724 [...] Call Trace: file_accessed include/linux/fs.h:2063 [inline] shmem_mmap+0x25/0x40 mm/shmem.c:2149 call_mmap include/linux/fs.h:1789 [inline] shm_mmap+0x34/0x80 ipc/shm.c:465 call_mmap include/linux/fs.h:1789 [inline] mmap_region+0x309/0x5b0 mm/mmap.c:1712 do_mmap+0x294/0x4a0 mm/mmap.c:1483 do_mmap_pgoff include/linux/mm.h:2235 [inline] SYSC_remap_file_pages mm/mmap.c:2853 [inline] SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769 do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439(a)syzkaller.appspotmail.com Fixes: c8d78c1823f4 ("mm: replace remap_file_pages() syscall with emulation") Signed-off-by: Eric Biggers <ebiggers(a)google.com> Cc: Davidlohr Bueso <dave(a)stgolabs.net> Cc: Manfred Spraul <manfred(a)colorfullife.com> Cc: "Eric W . Biederman" <ebiederm(a)xmission.com> Cc: "Kirill A. Shutemov" <kirill.shutemov(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN ipc/shm.c~ipc-shm-fix-use-after-free-of-shm-file-via-remap_file_pages ipc/shm.c --- a/ipc/shm.c~ipc-shm-fix-use-after-free-of-shm-file-via-remap_file_pages +++ a/ipc/shm.c @@ -225,6 +225,12 @@ static int __shm_open(struct vm_area_str if (IS_ERR(shp)) return PTR_ERR(shp); + if (shp->shm_file != sfd->file) { + /* ID was reused */ + shm_unlock(shp); + return -EINVAL; + } + shp->shm_atim = ktime_get_real_seconds(); ipc_update_pid(&shp->shm_lprid, task_tgid(current)); shp->shm_nattch++; @@ -455,8 +461,9 @@ static int shm_mmap(struct file *file, s int ret; /* - * In case of remap_file_pages() emulation, the file can represent - * removed IPC ID: propogate shm_lock() error to caller. + * In case of remap_file_pages() emulation, the file can represent an + * IPC ID that was removed, and possibly even reused by another shm + * segment already. Propagate this case as an error to caller. */ ret = __shm_open(vma); if (ret) @@ -480,6 +487,7 @@ static int shm_release(struct inode *ino struct shm_file_data *sfd = shm_file_data(file); put_ipc_ns(sfd->ns); + fput(sfd->file); shm_file_data(file) = NULL; kfree(sfd); return 0; @@ -1432,7 +1440,7 @@ long do_shmat(int shmid, char __user *sh file->f_mapping = shp->shm_file->f_mapping; sfd->id = shp->shm_perm.id; sfd->ns = get_ipc_ns(ns); - sfd->file = shp->shm_file; + sfd->file = get_file(shp->shm_file); sfd->vm_ops = NULL; err = security_mmap_file(file, prot, flags); _ Patches currently in -mm which might be from ebiggers(a)google.com are ipc-shm-fix-use-after-free-of-shm-file-via-remap_file_pages.patch

7 years, 2 months

1
0
0 0

+ gup-return-efault-on-access_ok-failure.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: get_user_pages_fast(): return -EFAULT on access_ok failure has been added to the -mm tree. Its filename is gup-return-efault-on-access_ok-failure.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/gup-return-efault-on-access_ok-fai… and later at http://ozlabs.org/~akpm/mmotm/broken-out/gup-return-efault-on-access_ok-fai… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: "Michael S. Tsirkin" <mst(a)redhat.com> Subject: get_user_pages_fast(): return -EFAULT on access_ok failure get_user_pages_fast is supposed to be a faster drop-in equivalent of get_user_pages. As such, callers expect it to return a negative return code when passed an invalid address, and never expect it to return 0 when passed a positive number of pages, since its documentation says: * Returns number of pages pinned. This may be fewer than the number * requested. If nr_pages is 0 or negative, returns 0. If no pages * were pinned, returns -errno. When get_user_pages_fast fall back on get_user_pages this is exactly what happens. Unfortunately the implementation is inconsistent: it returns 0 if passed a kernel address, confusing callers: for example, the following is pretty common but does not appear to do the right thing with a kernel address: ret = get_user_pages_fast(addr, 1, writeable, &page); if (ret < 0) return ret; Change get_user_pages_fast to return -EFAULT when supplied a kernel address to make it match expectations. All callers have been audited for consistency with the documented semantics. Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com Fixes: 5b65c4677a57 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()") Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> Reported-by: syzbot+6304bf97ef436580fede(a)syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Huang Ying <ying.huang(a)intel.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Thorsten Leemhuis <regressions(a)leemhuis.info> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/gup.c~gup-return-efault-on-access_ok-failure mm/gup.c --- a/mm/gup.c~gup-return-efault-on-access_ok-failure +++ a/mm/gup.c @@ -1806,9 +1806,12 @@ int get_user_pages_fast(unsigned long st len = (unsigned long) nr_pages << PAGE_SHIFT; end = start + len; + if (nr_pages <= 0) + return 0; + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, (void __user *)start, len))) - return 0; + return -EFAULT; if (gup_fast_permitted(start, nr_pages, write)) { local_irq_disable(); _ Patches currently in -mm which might be from mst(a)redhat.com are mm-gup_benchmark-handle-gup-failures.patch gup-return-efault-on-access_ok-failure.patch mm-gup-document-return-value.patch

7 years, 2 months

1
0
0 0

+ mm-gup_benchmark-handle-gup-failures-fix.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm-gup_benchmark-handle-gup-failures-fix has been added to the -mm tree. Its filename is mm-gup_benchmark-handle-gup-failures-fix.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-gup_benchmark-handle-gup-failur… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-gup_benchmark-handle-gup-failur… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Andrew Morton <akpm(a)linux-foundation.org> Subject: mm-gup_benchmark-handle-gup-failures-fix Cc: Huang Ying <ying.huang(a)intel.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: <stable(a)vger.kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Thorsten Leemhuis <regressions(a)leemhuis.info> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/gup_benchmark.c~mm-gup_benchmark-handle-gup-failures-fix mm/gup_benchmark.c --- a/mm/gup_benchmark.c~mm-gup_benchmark-handle-gup-failures-fix +++ a/mm/gup_benchmark.c @@ -41,8 +41,9 @@ static int __gup_benchmark_ioctl(unsigne } nr = get_user_pages_fast(addr, nr, gup->flags & 1, pages + i); - if (nr > 0) - i += nr; + if (nr <= 0) + break; + i += nr; } end_time = ktime_get(); _ Patches currently in -mm which might be from akpm(a)linux-foundation.org are i-need-old-gcc.patch mm-gup_benchmark-handle-gup-failures-fix.patch arm-arch-arm-include-asm-pageh-needs-personalityh.patch ocfs2-without-quota-support-try-to-avoid-calling-quota-recovery-checkpatch-fixes.patch mm.patch z3fold-fix-memory-leak-fix.patch list_lru-prefetch-neighboring-list-entries-before-acquiring-lock-fix.patch mm-oom-cgroup-aware-oom-killer-fix.patch mm-oom-docs-describe-the-cgroup-aware-oom-killer-fix-2-fix.patch proc-add-seq_put_decimal_ull_width-to-speed-up-proc-pid-smaps-fix.patch fs-reiserfs-journalc-add-missing-resierfs_warning-arg.patch ipc-shmc-shm_split-remove-unneeded-test-for-null-shm_file_datavm_ops.patch linux-next-rejects.patch linux-next-git-rejects.patch linux-next-fixup.patch fs-fsnotify-account-fsnotify-metadata-to-kmemcg-fix.patch kernel-forkc-export-kernel_thread-to-modules.patch slab-leaks3-default-y.patch

7 years, 2 months

1
0
0 0

+ mm-gup_benchmark-handle-gup-failures.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm/gup_benchmark: handle gup failures has been added to the -mm tree. Its filename is mm-gup_benchmark-handle-gup-failures.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-gup_benchmark-handle-gup-failur… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-gup_benchmark-handle-gup-failur… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: "Michael S. Tsirkin" <mst(a)redhat.com> Subject: mm/gup_benchmark: handle gup failures Patch series "mm/get_user_pages_fast fixes, cleanups", v2. Turns out get_user_pages_fast and __get_user_pages_fast return different values on error when given a single page: __get_user_pages_fast returns 0. get_user_pages_fast returns either 0 or an error. Callers of get_user_pages_fast expect an error so fix it up to return an error consistently. Stress the difference between get_user_pages_fast and __get_user_pages_fast to make sure callers aren't confused. This patch (of 3): __gup_benchmark_ioctl does not handle the case where get_user_pages_fast fails: - a negative return code will cause a buffer overrun - returning with partial success will cause use of uninitialized memory. Link: http://lkml.kernel.org/r/1522962072-182137-3-git-send-email-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Huang Ying <ying.huang(a)intel.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Thorsten Leemhuis <regressions(a)leemhuis.info> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/gup_benchmark.c~mm-gup_benchmark-handle-gup-failures mm/gup_benchmark.c --- a/mm/gup_benchmark.c~mm-gup_benchmark-handle-gup-failures +++ a/mm/gup_benchmark.c @@ -23,7 +23,7 @@ static int __gup_benchmark_ioctl(unsigne struct page **pages; nr_pages = gup->size / PAGE_SIZE; - pages = kvmalloc(sizeof(void *) * nr_pages, GFP_KERNEL); + pages = kvzalloc(sizeof(void *) * nr_pages, GFP_KERNEL); if (!pages) return -ENOMEM; @@ -41,7 +41,8 @@ static int __gup_benchmark_ioctl(unsigne } nr = get_user_pages_fast(addr, nr, gup->flags & 1, pages + i); - i += nr; + if (nr > 0) + i += nr; } end_time = ktime_get(); _ Patches currently in -mm which might be from mst(a)redhat.com are mm-gup_benchmark-handle-gup-failures.patch gup-return-efault-on-access_ok-failure.patch mm-gup-document-return-value.patch

7 years, 2 months

1
0
0 0

[PATCH v2 1/3] mm/gup_benchmark: handle gup failures

by Michael S. Tsirkin

__gup_benchmark_ioctl does not handle the case where get_user_pages_fast fails: - a negative return code will cause a buffer overrun - returning with partial success will cause use of uninitialized memory. Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Huang Ying <ying.huang(a)intel.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Thorsten Leemhuis <regressions(a)leemhuis.info> Cc: stable(a)vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> --- mm/gup_benchmark.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/gup_benchmark.c b/mm/gup_benchmark.c index 5c8e2ab..d743035 100644 --- a/mm/gup_benchmark.c +++ b/mm/gup_benchmark.c @@ -23,7 +23,7 @@ static int __gup_benchmark_ioctl(unsigned int cmd, struct page **pages; nr_pages = gup->size / PAGE_SIZE; - pages = kvmalloc(sizeof(void *) * nr_pages, GFP_KERNEL); + pages = kvzalloc(sizeof(void *) * nr_pages, GFP_KERNEL); if (!pages) return -ENOMEM; @@ -41,7 +41,8 @@ static int __gup_benchmark_ioctl(unsigned int cmd, } nr = get_user_pages_fast(addr, nr, gup->flags & 1, pages + i); - i += nr; + if (nr > 0) + i += nr; } end_time = ktime_get(); -- MST

7 years, 2 months

3
3
0 0

+ resource-fix-integer-overflow-at-reallocation.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: resource: fix integer overflow at reallocation has been added to the -mm tree. Its filename is resource-fix-integer-overflow-at-reallocation.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/resource-fix-integer-overflow-at-r… and later at http://ozlabs.org/~akpm/mmotm/broken-out/resource-fix-integer-overflow-at-r… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Takashi Iwai <tiwai(a)suse.de> Subject: resource: fix integer overflow at reallocation We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid resource assigned after PCI resource reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4052d ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check in resource_contains() to see whether the given resource has a valid range for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/20180408072026.27365-1-tiwai@suse.de Fixes: 23c570a67448 ("resource: ability to resize an allocated resource") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Reported-by: Michael Henders <hendersm(a)shaw.ca> Tested-by: Michael Henders <hendersm(a)shaw.ca> Reviewed-by: Ram Pai <linuxram(a)us.ibm.com> Cc: Bjorn Helgaas <bhelgaas(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN include/linux/ioport.h~resource-fix-integer-overflow-at-reallocation include/linux/ioport.h --- a/include/linux/ioport.h~resource-fix-integer-overflow-at-reallocation +++ a/include/linux/ioport.h @@ -212,6 +212,9 @@ static inline bool resource_contains(str return false; if (r1->flags & IORESOURCE_UNSET || r2->flags & IORESOURCE_UNSET) return false; + /* sanity check whether it's a valid resource range */ + if (r2->end < r2->start) + return false; return r1->start <= r2->start && r1->end >= r2->end; } _ Patches currently in -mm which might be from tiwai(a)suse.de are resource-fix-integer-overflow-at-reallocation.patch

7 years, 2 months

1
0
0 0

[merged] mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm: hwpoison: disable memory error handling on 1GB hugepage has been removed from the -mm tree. Its filename was mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Naoya Horiguchi <n-horiguchi(a)ah.jp.nec.com> Subject: mm: hwpoison: disable memory error handling on 1GB hugepage Recently the following BUG was reported: Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000 Memory failure: 0x3c0000: recovery action for huge page: Recovered BUG: unable to handle kernel paging request at ffff8dfcc0003000 IP: gup_pgd_range+0x1f0/0xc20 PGD 17ae72067 P4D 17ae72067 PUD 0 Oops: 0000 [#1] SMP PTI ... CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on a 1GB hugepage. This happens because get_user_pages_fast() is not aware of a migration entry on pud that was created in the 1st madvise() event. I think that conversion to pud-aligned migration entry is working, but other MM code walking over page table isn't prepared for it. We need some time and effort to make all this work properly, so this patch avoids the reported bug by just disabling error handling for 1GB hugepage. [n-horiguchi(a)ah.jp.nec.com: v2] Link: http://lkml.kernel.org/r/1517284444-18149-1-git-send-email-n-horiguchi@ah.j… Link: http://lkml.kernel.org/r/1517207283-15769-1-git-send-email-n-horiguchi@ah.j… Signed-off-by: Naoya Horiguchi <n-horiguchi(a)ah.jp.nec.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz(a)oracle.com> Acked-by: Punit Agrawal <punit.agrawal(a)arm.com> Tested-by: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Anshuman Khandual <khandual(a)linux.vnet.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar(a)linux.vnet.ibm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- include/linux/mm.h | 1 + mm/memory-failure.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff -puN include/linux/mm.h~mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage include/linux/mm.h --- a/include/linux/mm.h~mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage +++ a/include/linux/mm.h @@ -2613,6 +2613,7 @@ enum mf_action_page_type { MF_MSG_POISONED_HUGE, MF_MSG_HUGE, MF_MSG_FREE_HUGE, + MF_MSG_NON_PMD_HUGE, MF_MSG_UNMAP_FAILED, MF_MSG_DIRTY_SWAPCACHE, MF_MSG_CLEAN_SWAPCACHE, diff -puN mm/memory-failure.c~mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage mm/memory-failure.c --- a/mm/memory-failure.c~mm-hwpoison-disable-memory-error-handling-on-1gb-hugepage +++ a/mm/memory-failure.c @@ -502,6 +502,7 @@ static const char * const action_page_ty [MF_MSG_POISONED_HUGE] = "huge page already hardware poisoned", [MF_MSG_HUGE] = "huge page", [MF_MSG_FREE_HUGE] = "free huge page", + [MF_MSG_NON_PMD_HUGE] = "non-pmd-sized huge page", [MF_MSG_UNMAP_FAILED] = "unmapping failed page", [MF_MSG_DIRTY_SWAPCACHE] = "dirty swapcache page", [MF_MSG_CLEAN_SWAPCACHE] = "clean swapcache page", @@ -1084,6 +1085,21 @@ static int memory_failure_hugetlb(unsign return 0; } + /* + * TODO: hwpoison for pud-sized hugetlb doesn't work right now, so + * simply disable it. In order to make it work properly, we need + * make sure that: + * - conversion of a pud that maps an error hugetlb into hwpoison + * entry properly works, and + * - other mm code walking over page table is aware of pud-aligned + * hwpoison entries. + */ + if (huge_page_size(page_hstate(head)) > PMD_SIZE) { + action_result(pfn, MF_MSG_NON_PMD_HUGE, MF_IGNORED); + res = -EBUSY; + goto out; + } + if (!hwpoison_user_mappings(p, pfn, flags, &head)) { action_result(pfn, MF_MSG_UNMAP_FAILED, MF_IGNORED); res = -EBUSY; _ Patches currently in -mm which might be from n-horiguchi(a)ah.jp.nec.com are

7 years, 2 months

1
0
0 0

[merged] lib-fix-stall-in-__bitmap_parselist.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: lib: fix stall in __bitmap_parselist() has been removed from the -mm tree. Its filename was lib-fix-stall-in-__bitmap_parselist.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Yury Norov <ynorov(a)caviumnetworks.com> Subject: lib: fix stall in __bitmap_parselist() syzbot is catching stalls at __bitmap_parselist() (https://syzkaller.appspot.com/bug?id=ad7e0351fbc90535558514a71cd3edc1168199…). The trigger is unsigned long v = 0; bitmap_parselist("7:,", &v, BITS_PER_LONG); which results in hitting infinite loop at while (a <= b) { off = min(b - a + 1, used_size); bitmap_set(maskp, a, off); a += group_size; } due to used_size == group_size == 0. Link: http://lkml.kernel.org/r/20180404162647.15763-1-ynorov@caviumnetworks.com Fixes: 0a5ce0831d04382a ("lib/bitmap.c: make bitmap_parselist() thread-safe and much faster") Signed-off-by: Yury Norov <ynorov(a)caviumnetworks.com> Reported-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+6887cbb011c8054e8a3d(a)syzkaller.appspotmail.com> Cc: Noam Camus <noamca(a)mellanox.com> Cc: Rasmus Villemoes <linux(a)rasmusvillemoes.dk> Cc: Matthew Wilcox <mawilcox(a)microsoft.com> Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- lib/bitmap.c | 2 +- lib/test_bitmap.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff -puN lib/bitmap.c~lib-fix-stall-in-__bitmap_parselist lib/bitmap.c --- a/lib/bitmap.c~lib-fix-stall-in-__bitmap_parselist +++ a/lib/bitmap.c @@ -607,7 +607,7 @@ static int __bitmap_parselist(const char /* if no digit is after '-', it's wrong*/ if (at_start && in_range) return -EINVAL; - if (!(a <= b) || !(used_size <= group_size)) + if (!(a <= b) || group_size == 0 || !(used_size <= group_size)) return -EINVAL; if (b >= nmaskbits) return -ERANGE; diff -puN lib/test_bitmap.c~lib-fix-stall-in-__bitmap_parselist lib/test_bitmap.c --- a/lib/test_bitmap.c~lib-fix-stall-in-__bitmap_parselist +++ a/lib/test_bitmap.c @@ -255,6 +255,10 @@ static const struct test_bitmap_parselis {-EINVAL, "-1", NULL, 8, 0}, {-EINVAL, "-0", NULL, 8, 0}, {-EINVAL, "10-1", NULL, 8, 0}, + {-EINVAL, "0-31:", NULL, 8, 0}, + {-EINVAL, "0-31:0", NULL, 8, 0}, + {-EINVAL, "0-31:0/0", NULL, 8, 0}, + {-EINVAL, "0-31:1/0", NULL, 8, 0}, {-EINVAL, "0-31:10/1", NULL, 8, 0}, }; _ Patches currently in -mm which might be from ynorov(a)caviumnetworks.com are

7 years, 2 months

1
0
0 0

[merged] hugetlbfs-fix-bug-in-pgoff-overflow-checking.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: hugetlbfs: fix bug in pgoff overflow checking has been removed from the -mm tree. Its filename was hugetlbfs-fix-bug-in-pgoff-overflow-checking.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Mike Kravetz <mike.kravetz(a)oracle.com> Subject: hugetlbfs: fix bug in pgoff overflow checking This is a fix for a regression in 32 bit kernels caused by an invalid check for pgoff overflow in hugetlbfs mmap setup. The check incorrectly specified that the size of a loff_t was the same as the size of a long. The regression prevents mapping hugetlbfs files at offsets greater than 4GB on 32 bit kernels. On 32 bit kernels conversion from a page based unsigned long can not overflow a loff_t byte offset. Therefore, skip this check if sizeof(unsigned long) != sizeof(loff_t). Link: http://lkml.kernel.org/r/20180330145402.5053-1-mike.kravetz@oracle.com Fixes: 63489f8e8211 ("hugetlbfs: check for pgoff value overflow") Reported-by: Dan Rue <dan.rue(a)linaro.org> Signed-off-by: Mike Kravetz <mike.kravetz(a)oracle.com> Tested-by: Anders Roxell <anders.roxell(a)linaro.org> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: Yisheng Xie <xieyisheng1(a)huawei.com> Cc: "Kirill A . Shutemov" <kirill.shutemov(a)linux.intel.com> Cc: Nic Losby <blurbdust(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/hugetlbfs/inode.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff -puN fs/hugetlbfs/inode.c~hugetlbfs-fix-bug-in-pgoff-overflow-checking fs/hugetlbfs/inode.c --- a/fs/hugetlbfs/inode.c~hugetlbfs-fix-bug-in-pgoff-overflow-checking +++ a/fs/hugetlbfs/inode.c @@ -138,10 +138,14 @@ static int hugetlbfs_file_mmap(struct fi /* * page based offset in vm_pgoff could be sufficiently large to - * overflow a (l)off_t when converted to byte offset. + * overflow a loff_t when converted to byte offset. This can + * only happen on architectures where sizeof(loff_t) == + * sizeof(unsigned long). So, only check in those instances. */ - if (vma->vm_pgoff & PGOFF_LOFFT_MAX) - return -EINVAL; + if (sizeof(unsigned long) == sizeof(loff_t)) { + if (vma->vm_pgoff & PGOFF_LOFFT_MAX) + return -EINVAL; + } /* must be huge page aligned */ if (vma->vm_pgoff & (~huge_page_mask(h) >> PAGE_SHIFT)) _ Patches currently in -mm which might be from mike.kravetz(a)oracle.com are

7 years, 2 months

1
0
0 0

[merged] zboot-fix-stack-protector-in-compressed-boot-phase.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: zboot: fix stack protector in compressed boot phase has been removed from the -mm tree. Its filename was zboot-fix-stack-protector-in-compressed-boot-phase.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Huacai Chen <chenhc(a)lemote.com> Subject: zboot: fix stack protector in compressed boot phase Call __stack_chk_guard_setup() in decompress_kernel() is too late that stack checking always fails for decompress_kernel() itself. So remove __stack_chk_guard_setup() and initialize __stack_chk_guard before we call decompress_kernel(). Original code comes from ARM but also used for MIPS and SH, so fix them together. If without this fix, compressed booting of these archs will fail because stack checking is enabled by default (>=4.16). Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com Fixes: 8779657d29c0 ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") Signed-off-by: Huacai Chen <chenhc(a)lemote.com> Acked-by: James Hogan <jhogan(a)kernel.org> Acked-by: Kees Cook <keescook(a)chromium.org> Acked-by: Rich Felker <dalias(a)libc.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Russell King <linux(a)arm.linux.org.uk> Cc: Yoshinori Sato <ysato(a)users.sourceforge.jp> Cc: Ingo Molnar <mingo(a)elte.hu> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- arch/arm/boot/compressed/misc.c | 9 +-------- arch/mips/boot/compressed/decompress.c | 9 +-------- arch/sh/boot/compressed/misc.c | 9 +-------- 3 files changed, 3 insertions(+), 24 deletions(-) diff -puN arch/arm/boot/compressed/misc.c~zboot-fix-stack-protector-in-compressed-boot-phase arch/arm/boot/compressed/misc.c --- a/arch/arm/boot/compressed/misc.c~zboot-fix-stack-protector-in-compressed-boot-phase +++ a/arch/arm/boot/compressed/misc.c @@ -128,12 +128,7 @@ asmlinkage void __div0(void) error("Attempting division by 0!"); } -unsigned long __stack_chk_guard; - -void __stack_chk_guard_setup(void) -{ - __stack_chk_guard = 0x000a0dff; -} +const unsigned long __stack_chk_guard = 0x000a0dff; void __stack_chk_fail(void) { @@ -150,8 +145,6 @@ decompress_kernel(unsigned long output_s { int ret; - __stack_chk_guard_setup(); - output_data = (unsigned char *)output_start; free_mem_ptr = free_mem_ptr_p; free_mem_end_ptr = free_mem_ptr_end_p; diff -puN arch/mips/boot/compressed/decompress.c~zboot-fix-stack-protector-in-compressed-boot-phase arch/mips/boot/compressed/decompress.c --- a/arch/mips/boot/compressed/decompress.c~zboot-fix-stack-protector-in-compressed-boot-phase +++ a/arch/mips/boot/compressed/decompress.c @@ -76,12 +76,7 @@ void error(char *x) #include "../../../../lib/decompress_unxz.c" #endif -unsigned long __stack_chk_guard; - -void __stack_chk_guard_setup(void) -{ - __stack_chk_guard = 0x000a0dff; -} +const unsigned long __stack_chk_guard = 0x000a0dff; void __stack_chk_fail(void) { @@ -92,8 +87,6 @@ void decompress_kernel(unsigned long boo { unsigned long zimage_start, zimage_size; - __stack_chk_guard_setup(); - zimage_start = (unsigned long)(&__image_begin); zimage_size = (unsigned long)(&__image_end) - (unsigned long)(&__image_begin); diff -puN arch/sh/boot/compressed/misc.c~zboot-fix-stack-protector-in-compressed-boot-phase arch/sh/boot/compressed/misc.c --- a/arch/sh/boot/compressed/misc.c~zboot-fix-stack-protector-in-compressed-boot-phase +++ a/arch/sh/boot/compressed/misc.c @@ -104,12 +104,7 @@ static void error(char *x) while(1); /* Halt */ } -unsigned long __stack_chk_guard; - -void __stack_chk_guard_setup(void) -{ - __stack_chk_guard = 0x000a0dff; -} +const unsigned long __stack_chk_guard = 0x000a0dff; void __stack_chk_fail(void) { @@ -130,8 +125,6 @@ void decompress_kernel(void) { unsigned long output_addr; - __stack_chk_guard_setup(); - #ifdef CONFIG_SUPERH64 output_addr = (CONFIG_MEMORY_START + 0x2000); #else _ Patches currently in -mm which might be from chenhc(a)lemote.com are

7 years, 2 months

1
0
0 0

[PATCH] blk-mq: Fix recently introduced races in the timeout handling code

by Bart Van Assche

If a completion occurs after blk_mq_rq_timed_out() has reset rq->aborted_gstate and the request is again in flight when the timeout expires then a request will be completed twice: a first time by the timeout handler and a second time when the regular completion occurs. Additionally, the blk-mq timeout handling code ignores completions that occur after blk_mq_check_expired() has been called and before blk_mq_rq_timed_out() has reset rq->aborted_gstate. If a block driver timeout handler always returns BLK_EH_RESET_TIMER then the result will be that the request never terminates. Since the request state can be updated from two different contexts, namely regular completion and request timeout, this race cannot be fixed with RCU synchronization only. Fix this race as follows: - Introduce a spinlock to protect the request state and deadline changes. - Use the deadline instead of the request generation to detect whether or not a request timer fired after reinitialization of a request. - Store the request state in the lowest two bits of the deadline instead of the lowest two bits of 'gstate'. - Remove all request member variables that became superfluous due to this change: gstate, aborted_gstate, gstate_seq and aborted_gstate_sync. - Remove the request state information that became superfluous due to this patch, namely RQF_MQ_TIMEOUT_EXPIRED. - Remove the code that became superfluous due to this change, namely the RCU lock and unlock statements in blk_mq_complete_request() and also the synchronize_rcu() call in the timeout handler. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at (null) Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 151 Comm: kworker/2:1H Tainted: G W 4.15.0-dbg+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:scsi_times_out+0x17/0x2c0 [scsi_mod] Call Trace: blk_mq_terminate_expired+0x42/0x80 bt_iter+0x3d/0x50 blk_mq_queue_tag_busy_iter+0xe9/0x200 blk_mq_timeout_work+0x181/0x2e0 process_one_work+0x21c/0x6d0 worker_thread+0x35/0x380 kthread+0x117/0x130 ret_from_fork+0x24/0x30 Fixes: 1d9bd5161ba3 ("blk-mq: replace timeout synchronization with a RCU and generation based scheme") Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Tejun Heo <tj(a)kernel.org> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Sagi Grimberg <sagi(a)grimberg.me> Cc: Israel Rukshin <israelr(a)mellanox.com>, Cc: Max Gurtovoy <maxg(a)mellanox.com> Cc: <stable(a)vger.kernel.org> # v4.16 --- block/blk-core.c | 3 +- block/blk-mq-debugfs.c | 1 - block/blk-mq.c | 178 +++++++++++-------------------------------------- block/blk-mq.h | 25 ++----- block/blk-timeout.c | 1 - block/blk.h | 4 +- include/linux/blkdev.h | 28 ++------ 7 files changed, 53 insertions(+), 187 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 2623e609db4a..83c7a58e4fb3 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -200,8 +200,7 @@ void blk_rq_init(struct request_queue *q, struct request *rq) rq->start_time = jiffies; set_start_time_ns(rq); rq->part = NULL; - seqcount_init(&rq->gstate_seq); - u64_stats_init(&rq->aborted_gstate_sync); + spin_lock_init(&rq->state_lock); } EXPORT_SYMBOL(blk_rq_init); diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index 6f72413b6cab..80c7c585769f 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -345,7 +345,6 @@ static const char *const rqf_name[] = { RQF_NAME(STATS), RQF_NAME(SPECIAL_PAYLOAD), RQF_NAME(ZONE_WRITE_LOCKED), - RQF_NAME(MQ_TIMEOUT_EXPIRED), RQF_NAME(MQ_POLL_SLEPT), }; #undef RQF_NAME diff --git a/block/blk-mq.c b/block/blk-mq.c index 7816d28b7219..1da16d5e5cf1 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -305,7 +305,6 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, rq->special = NULL; /* tag was already set */ rq->extra_len = 0; - rq->__deadline = 0; INIT_LIST_HEAD(&rq->timeout_list); rq->timeout = 0; @@ -527,8 +526,7 @@ static void __blk_mq_complete_request(struct request *rq) bool shared = false; int cpu; - WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT); - blk_mq_rq_update_state(rq, MQ_RQ_COMPLETE); + WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_COMPLETE); if (rq->internal_tag != -1) blk_mq_sched_completed_request(rq); @@ -577,34 +575,26 @@ static void hctx_lock(struct blk_mq_hw_ctx *hctx, int *srcu_idx) *srcu_idx = srcu_read_lock(hctx->srcu); } -static void blk_mq_rq_update_aborted_gstate(struct request *rq, u64 gstate) +/** + * blk_mq_change_rq_state - atomically test and set request state + * @rq: Request pointer. + * @old: Old request state. + * @new: New request state. + */ +static bool blk_mq_change_rq_state(struct request *rq, enum mq_rq_state old, + enum mq_rq_state new) { unsigned long flags; + bool changed_state = false; - /* - * blk_mq_rq_aborted_gstate() is used from the completion path and - * can thus be called from irq context. u64_stats_fetch in the - * middle of update on the same CPU leads to lockup. Disable irq - * while updating. - */ - local_irq_save(flags); - u64_stats_update_begin(&rq->aborted_gstate_sync); - rq->aborted_gstate = gstate; - u64_stats_update_end(&rq->aborted_gstate_sync); - local_irq_restore(flags); -} - -static u64 blk_mq_rq_aborted_gstate(struct request *rq) -{ - unsigned int start; - u64 aborted_gstate; - - do { - start = u64_stats_fetch_begin(&rq->aborted_gstate_sync); - aborted_gstate = rq->aborted_gstate; - } while (u64_stats_fetch_retry(&rq->aborted_gstate_sync, start)); + spin_lock_irqsave(&rq->state_lock, flags); + if (blk_mq_rq_state(rq) == old) { + blk_mq_rq_update_state(rq, new); + changed_state = true; + } + spin_unlock_irqrestore(&rq->state_lock, flags); - return aborted_gstate; + return changed_state; } /** @@ -618,27 +608,12 @@ static u64 blk_mq_rq_aborted_gstate(struct request *rq) void blk_mq_complete_request(struct request *rq) { struct request_queue *q = rq->q; - struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, rq->mq_ctx->cpu); - int srcu_idx; if (unlikely(blk_should_fake_timeout(q))) return; - /* - * If @rq->aborted_gstate equals the current instance, timeout is - * claiming @rq and we lost. This is synchronized through - * hctx_lock(). See blk_mq_timeout_work() for details. - * - * Completion path never blocks and we can directly use RCU here - * instead of hctx_lock() which can be either RCU or SRCU. - * However, that would complicate paths which want to synchronize - * against us. Let stay in sync with the issue path so that - * hctx_lock() covers both issue and completion paths. - */ - hctx_lock(hctx, &srcu_idx); - if (blk_mq_rq_aborted_gstate(rq) != rq->gstate) + if (blk_mq_change_rq_state(rq, MQ_RQ_IN_FLIGHT, MQ_RQ_COMPLETE)) __blk_mq_complete_request(rq); - hctx_unlock(hctx, srcu_idx); } EXPORT_SYMBOL(blk_mq_complete_request); @@ -665,24 +640,14 @@ void blk_mq_start_request(struct request *rq) WARN_ON_ONCE(blk_mq_rq_state(rq) != MQ_RQ_IDLE); /* - * Mark @rq in-flight which also advances the generation number, - * and register for timeout. Protect with a seqcount to allow the - * timeout path to read both @rq->gstate and @rq->deadline - * coherently. - * - * This is the only place where a request is marked in-flight. If - * the timeout path reads an in-flight @rq->gstate, the - * @rq->deadline it reads together under @rq->gstate_seq is - * guaranteed to be the matching one. + * Mark @rq in-flight and register for timeout. Because blk_add_timer() + * updates the deadline, if a timer set by a previous incarnation of + * this request fires this request will be skipped by the timeout code. */ - preempt_disable(); - write_seqcount_begin(&rq->gstate_seq); - + spin_lock_irq(&rq->state_lock); blk_mq_rq_update_state(rq, MQ_RQ_IN_FLIGHT); blk_add_timer(rq); - - write_seqcount_end(&rq->gstate_seq); - preempt_enable(); + spin_unlock_irq(&rq->state_lock); if (q->dma_drain_size && blk_rq_bytes(rq)) { /* @@ -695,11 +660,6 @@ void blk_mq_start_request(struct request *rq) } EXPORT_SYMBOL(blk_mq_start_request); -/* - * When we reach here because queue is busy, it's safe to change the state - * to IDLE without checking @rq->aborted_gstate because we should still be - * holding the RCU read lock and thus protected against timeout. - */ static void __blk_mq_requeue_request(struct request *rq) { struct request_queue *q = rq->q; @@ -811,15 +771,13 @@ EXPORT_SYMBOL(blk_mq_tag_to_rq); struct blk_mq_timeout_data { unsigned long next; unsigned int next_set; - unsigned int nr_expired; }; static void blk_mq_rq_timed_out(struct request *req, bool reserved) { const struct blk_mq_ops *ops = req->q->mq_ops; enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER; - - req->rq_flags |= RQF_MQ_TIMEOUT_EXPIRED; + unsigned long flags; if (ops->timeout) ret = ops->timeout(req, reserved); @@ -829,13 +787,10 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved) __blk_mq_complete_request(req); break; case BLK_EH_RESET_TIMER: - /* - * As nothing prevents from completion happening while - * ->aborted_gstate is set, this may lead to ignored - * completions and further spurious timeouts. - */ - blk_mq_rq_update_aborted_gstate(req, 0); + spin_lock_irqsave(&req->state_lock, flags); blk_add_timer(req); + blk_mq_rq_update_state(req, MQ_RQ_IN_FLIGHT); + spin_unlock_irqrestore(&req->state_lock, flags); break; case BLK_EH_NOT_HANDLED: break; @@ -849,48 +804,23 @@ static void blk_mq_check_expired(struct blk_mq_hw_ctx *hctx, struct request *rq, void *priv, bool reserved) { struct blk_mq_timeout_data *data = priv; - unsigned long gstate, deadline; - int start; - - might_sleep(); - - if (rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) - return; - - /* read coherent snapshots of @rq->state_gen and @rq->deadline */ - while (true) { - start = read_seqcount_begin(&rq->gstate_seq); - gstate = READ_ONCE(rq->gstate); - deadline = blk_rq_deadline(rq); - if (!read_seqcount_retry(&rq->gstate_seq, start)) - break; - cond_resched(); - } + unsigned long deadline; + bool timed_out = false; - /* if in-flight && overdue, mark for abortion */ - if ((gstate & MQ_RQ_STATE_MASK) == MQ_RQ_IN_FLIGHT && + spin_lock_irq(&rq->state_lock); + deadline = blk_rq_deadline(rq); + if (blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT && time_after_eq(jiffies, deadline)) { - blk_mq_rq_update_aborted_gstate(rq, gstate); - data->nr_expired++; + blk_mq_rq_update_state(rq, MQ_RQ_COMPLETE); + timed_out = true; hctx->nr_expired++; } else if (!data->next_set || time_after(data->next, deadline)) { data->next = deadline; data->next_set = 1; } -} + spin_unlock_irq(&rq->state_lock); -static void blk_mq_terminate_expired(struct blk_mq_hw_ctx *hctx, - struct request *rq, void *priv, bool reserved) -{ - /* - * We marked @rq->aborted_gstate and waited for RCU. If there were - * completions that we lost to, they would have finished and - * updated @rq->gstate by now; otherwise, the completion path is - * now guaranteed to see @rq->aborted_gstate and yield. If - * @rq->aborted_gstate still matches @rq->gstate, @rq is ours. - */ - if (!(rq->rq_flags & RQF_MQ_TIMEOUT_EXPIRED) && - READ_ONCE(rq->gstate) == rq->aborted_gstate) + if (timed_out) blk_mq_rq_timed_out(rq, reserved); } @@ -898,11 +828,7 @@ static void blk_mq_timeout_work(struct work_struct *work) { struct request_queue *q = container_of(work, struct request_queue, timeout_work); - struct blk_mq_timeout_data data = { - .next = 0, - .next_set = 0, - .nr_expired = 0, - }; + struct blk_mq_timeout_data data = { }; struct blk_mq_hw_ctx *hctx; int i; @@ -925,33 +851,6 @@ static void blk_mq_timeout_work(struct work_struct *work) /* scan for the expired ones and set their ->aborted_gstate */ blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &data); - if (data.nr_expired) { - bool has_rcu = false; - - /* - * Wait till everyone sees ->aborted_gstate. The - * sequential waits for SRCUs aren't ideal. If this ever - * becomes a problem, we can add per-hw_ctx rcu_head and - * wait in parallel. - */ - queue_for_each_hw_ctx(q, hctx, i) { - if (!hctx->nr_expired) - continue; - - if (!(hctx->flags & BLK_MQ_F_BLOCKING)) - has_rcu = true; - else - synchronize_srcu(hctx->srcu); - - hctx->nr_expired = 0; - } - if (has_rcu) - synchronize_rcu(); - - /* terminate the ones we won */ - blk_mq_queue_tag_busy_iter(q, blk_mq_terminate_expired, NULL); - } - if (data.next_set) { data.next = blk_rq_timeout(round_jiffies_up(data.next)); mod_timer(&q->timeout, data.next); @@ -2087,8 +1986,7 @@ static int blk_mq_init_request(struct blk_mq_tag_set *set, struct request *rq, return ret; } - seqcount_init(&rq->gstate_seq); - u64_stats_init(&rq->aborted_gstate_sync); + spin_lock_init(&rq->state_lock); return 0; } diff --git a/block/blk-mq.h b/block/blk-mq.h index 88c558f71819..d4d72f95d5a9 100644 --- a/block/blk-mq.h +++ b/block/blk-mq.h @@ -27,10 +27,7 @@ struct blk_mq_ctx { struct kobject kobj; } ____cacheline_aligned_in_smp; -/* - * Bits for request->gstate. The lower two bits carry MQ_RQ_* state value - * and the upper bits the generation number. - */ +/* Lowest two bits of request->__deadline. */ enum mq_rq_state { MQ_RQ_IDLE = 0, MQ_RQ_IN_FLIGHT = 1, @@ -38,7 +35,6 @@ enum mq_rq_state { MQ_RQ_STATE_BITS = 2, MQ_RQ_STATE_MASK = (1 << MQ_RQ_STATE_BITS) - 1, - MQ_RQ_GEN_INC = 1 << MQ_RQ_STATE_BITS, }; void blk_mq_freeze_queue(struct request_queue *q); @@ -104,9 +100,9 @@ void blk_mq_release(struct request_queue *q); * blk_mq_rq_state() - read the current MQ_RQ_* state of a request * @rq: target request. */ -static inline int blk_mq_rq_state(struct request *rq) +static inline enum mq_rq_state blk_mq_rq_state(struct request *rq) { - return READ_ONCE(rq->gstate) & MQ_RQ_STATE_MASK; + return rq->__deadline & MQ_RQ_STATE_MASK; } /** @@ -115,22 +111,15 @@ static inline int blk_mq_rq_state(struct request *rq) * @state: new state to set. * * Set @rq's state to @state. The caller is responsible for ensuring that - * there are no other updaters. A request can transition into IN_FLIGHT - * only from IDLE and doing so increments the generation number. + * there are no other updaters. */ static inline void blk_mq_rq_update_state(struct request *rq, enum mq_rq_state state) { - u64 old_val = READ_ONCE(rq->gstate); - u64 new_val = (old_val & ~MQ_RQ_STATE_MASK) | state; - - if (state == MQ_RQ_IN_FLIGHT) { - WARN_ON_ONCE((old_val & MQ_RQ_STATE_MASK) != MQ_RQ_IDLE); - new_val += MQ_RQ_GEN_INC; - } + unsigned long d = rq->__deadline; - /* avoid exposing interim values */ - WRITE_ONCE(rq->gstate, new_val); + d &= ~(unsigned long)MQ_RQ_STATE_MASK; + rq->__deadline = d | state; } static inline struct blk_mq_ctx *__blk_mq_get_ctx(struct request_queue *q, diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 50a191720055..844a98edcf3f 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -217,7 +217,6 @@ void blk_add_timer(struct request *req) req->timeout = q->rq_timeout; blk_rq_set_deadline(req, jiffies + req->timeout); - req->rq_flags &= ~RQF_MQ_TIMEOUT_EXPIRED; /* * Only the non-mq case needs to add the request to a protected list. diff --git a/block/blk.h b/block/blk.h index b034fd2460c4..07275598d262 100644 --- a/block/blk.h +++ b/block/blk.h @@ -314,12 +314,12 @@ static inline void req_set_nomerge(struct request_queue *q, struct request *req) */ static inline void blk_rq_set_deadline(struct request *rq, unsigned long time) { - rq->__deadline = time & ~0x1UL; + rq->__deadline = (time & ~0x3UL) | (rq->__deadline & 3UL); } static inline unsigned long blk_rq_deadline(struct request *rq) { - return rq->__deadline & ~0x1UL; + return rq->__deadline & ~0x3UL; } /* diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6075d1a6760c..e0a6a741afd0 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -27,7 +27,6 @@ #include <linux/percpu-refcount.h> #include <linux/scatterlist.h> #include <linux/blkzoned.h> -#include <linux/seqlock.h> #include <linux/u64_stats_sync.h> struct module; @@ -125,8 +124,6 @@ typedef __u32 __bitwise req_flags_t; #define RQF_SPECIAL_PAYLOAD ((__force req_flags_t)(1 << 18)) /* The per-zone write lock is held for this request */ #define RQF_ZONE_WRITE_LOCKED ((__force req_flags_t)(1 << 19)) -/* timeout is expired */ -#define RQF_MQ_TIMEOUT_EXPIRED ((__force req_flags_t)(1 << 20)) /* already slept for hybrid poll */ #define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 21)) @@ -141,6 +138,7 @@ typedef __u32 __bitwise req_flags_t; * especially blk_mq_rq_ctx_init() to take care of the added fields. */ struct request { + spinlock_t state_lock; /* protects __deadline for blk-mq */ struct request_queue *q; struct blk_mq_ctx *mq_ctx; @@ -226,27 +224,11 @@ struct request { unsigned int extra_len; /* length of alignment and padding */ /* - * On blk-mq, the lower bits of ->gstate (generation number and - * state) carry the MQ_RQ_* state value and the upper bits the - * generation number which is monotonically incremented and used to - * distinguish the reuse instances. - * - * ->gstate_seq allows updates to ->gstate and other fields - * (currently ->deadline) during request start to be read - * atomically from the timeout path, so that it can operate on a - * coherent set of information. + * access through blk_rq_set_deadline(), blk_rq_deadline() and + * blk_mark_rq_complete(), blk_clear_rq_complete() and + * blk_rq_is_complete() for legacy queues or blk_mq_rq_state() for + * blk-mq queues. */ - seqcount_t gstate_seq; - u64 gstate; - - /* - * ->aborted_gstate is used by the timeout to claim a specific - * recycle instance of this request. See blk_mq_timeout_work(). - */ - struct u64_stats_sync aborted_gstate_sync; - u64 aborted_gstate; - - /* access through blk_rq_set_deadline, blk_rq_deadline */ unsigned long __deadline; struct list_head timeout_list; -- 2.16.2

7 years, 2 months

8
12
0 0

Patch "xfrm: fix state migration copy replay sequence numbers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfrm: fix state migration copy replay sequence numbers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfrm-fix-state-migration-copy-replay-sequence-numbers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Antony Antony <antony(a)phenome.org> Date: Fri, 19 May 2017 12:47:00 +0200 Subject: xfrm: fix state migration copy replay sequence numbers From: Antony Antony <antony(a)phenome.org> [ Upstream commit a486cd23661c9387fb076c3f6ae8b2aa9d20d54a ] During xfrm migration copy replay and preplay sequence numbers from the previous state. Here is a tcpdump output showing the problem. 10.0.10.46 is running vanilla kernel, is the IKE/IPsec responder. After the migration it sent wrong sequence number, reset to 1. The migration is from 10.0.0.52 to 10.0.0.53. IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7cf), length 136 IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7cf), length 136 IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d0), length 136 IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7d0), length 136 IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I] IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R] IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I] IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R] IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d1), length 136 NOTE: next sequence is wrong 0x1 IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x1), length 136 IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d2), length 136 IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x2), length 136 Signed-off-by: Antony Antony <antony(a)phenome.org> Reviewed-by: Richard Guy Briggs <rgb(a)tricolour.ca> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/xfrm/xfrm_state.c | 2 ++ 1 file changed, 2 insertions(+) --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1246,6 +1246,8 @@ static struct xfrm_state *xfrm_state_clo x->curlft.add_time = orig->curlft.add_time; x->km.state = orig->km.state; x->km.seq = orig->km.seq; + x->replay = orig->replay; + x->preplay = orig->preplay; return x; Patches currently in stable-queue which might be from antony(a)phenome.org are queue-4.9/xfrm-fix-state-migration-copy-replay-sequence-numbers.patch

7 years, 2 months

1
0
0 0

Patch "xen: avoid type warning in xchg_xen_ulong" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen: avoid type warning in xchg_xen_ulong to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-avoid-type-warning-in-xchg_xen_ulong.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Arnd Bergmann <arnd(a)arndb.de> Date: Thu, 8 Jun 2017 10:53:10 +0200 Subject: xen: avoid type warning in xchg_xen_ulong From: Arnd Bergmann <arnd(a)arndb.de> [ Upstream commit 9cc91f212111cdcbefa02dcdb7dd443f224bf52c ] The improved type-checking version of container_of() triggers a warning for xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t contains a signed value: drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events': drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of() This adds a cast to work around the warning. Cc: Ian Abbott <abbotti(a)mev.co.uk> Fixes: 85323a991d40 ("xen: arm: mandate EABI and use generic atomic operations.") Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Stefano Stabellini <sstabellini(a)kernel.org> Reviewed-by: Stefano Stabellini <sstabellini(a)kernel.org> Acked-by: Ian Abbott <abbotti(a)mev.co.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/include/asm/xen/events.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -16,7 +16,7 @@ static inline int xen_irqs_disabled(stru return raw_irqs_disabled_flags(regs->ARM_cpsr); } -#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \ +#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((long long*)(ptr),\ atomic64_t, \ counter), (val)) Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.9/net-mlx5-avoid-build-warning-for-uniprocessor.patch queue-4.9/xen-avoid-type-warning-in-xchg_xen_ulong.patch

7 years, 2 months

1
0
0 0

Patch "x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Matthias Kaehlcke <mka(a)chromium.org> Date: Mon, 1 May 2017 15:47:41 -0700 Subject: x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility From: Matthias Kaehlcke <mka(a)chromium.org> [ Upstream commit 121843eb02a6e2fa30aefab64bfe183c97230c75 ] The constraint "rm" allows the compiler to put mix_const into memory. When the input operand is a memory location then MUL needs an operand size suffix, since Clang can't infer the multiplication width from the operand. Add and use the _ASM_MUL macro which determines the operand size and resolves to the NUL instruction with the corresponding suffix. This fixes the following error when building with clang: CC arch/x86/lib/kaslr.o /tmp/kaslr-dfe1ad.s: Assembler messages: /tmp/kaslr-dfe1ad.s:182: Error: no instruction mnemonic suffix given and no register operands; can't size instruction Signed-off-by: Matthias Kaehlcke <mka(a)chromium.org> Cc: Grant Grundler <grundler(a)chromium.org> Cc: Greg Hackmann <ghackmann(a)google.com> Cc: Kees Cook <keescook(a)chromium.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Michael Davidson <md(a)google.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Link: http://lkml.kernel.org/r/20170501224741.133938-1-mka@chromium.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/asm.h | 1 + arch/x86/lib/kaslr.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) --- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -34,6 +34,7 @@ #define _ASM_ADD __ASM_SIZE(add) #define _ASM_SUB __ASM_SIZE(sub) #define _ASM_XADD __ASM_SIZE(xadd) +#define _ASM_MUL __ASM_SIZE(mul) #define _ASM_AX __ASM_REG(ax) #define _ASM_BX __ASM_REG(bx) --- a/arch/x86/lib/kaslr.c +++ b/arch/x86/lib/kaslr.c @@ -5,6 +5,7 @@ * kernel starts. This file is included in the compressed kernel and * normally linked in the regular. */ +#include <asm/asm.h> #include <asm/kaslr.h> #include <asm/msr.h> #include <asm/archrandom.h> @@ -79,7 +80,7 @@ unsigned long kaslr_get_random_long(cons } /* Circular multiply for better bit diffusion */ - asm("mul %3" + asm(_ASM_MUL "%3" : "=a" (random), "=d" (raw) : "a" (random), "rm" (mix_const)); random += raw; Patches currently in stable-queue which might be from mka(a)chromium.org are queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch

7 years, 2 months

1
0
0 0

Patch "x86/tsc: Provide 'tsc=unstable' boot parameter" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/tsc: Provide 'tsc=unstable' boot parameter to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-tsc-provide-tsc-unstable-boot-parameter.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Peter Zijlstra <peterz(a)infradead.org> Date: Thu, 13 Apr 2017 14:56:44 +0200 Subject: x86/tsc: Provide 'tsc=unstable' boot parameter From: Peter Zijlstra <peterz(a)infradead.org> [ Upstream commit 8309f86cd41e8714526867177facf7a316d9be53 ] Since the clocksource watchdog will only detect broken TSC after the fact, all TSC based clocks will likely have observed non-continuous values before/when switching away from TSC. Therefore only thing to fully avoid random clock movement when your BIOS randomly mucks with TSC values from SMI handlers is reporting the TSC as unstable at boot. Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Mike Galbraith <efault(a)gmx.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: linux-kernel(a)vger.kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/tsc.c | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -366,6 +366,8 @@ static int __init tsc_setup(char *str) tsc_clocksource_reliable = 1; if (!strncmp(str, "noirqtime", 9)) no_sched_irq_time = 1; + if (!strcmp(str, "unstable")) + mark_tsc_unstable("boot parameter"); return 1; } Patches currently in stable-queue which might be from peterz(a)infradead.org are queue-4.9/perf-callchain-force-user_ds-when-invoking-perf_callchain_user.patch queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/x86-efi-disable-runtime-services-on-kexec-kernel-if-booted-with-efi-old_map.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/sched-numa-use-down_read_trylock-for-the-mmap_sem.patch queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch queue-4.9/perf-core-correct-event-creation-with-perf_format_group.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/x86-tsc-provide-tsc-unstable-boot-parameter.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/cpuhotplug-link-lock-stacks-for-hotplug-callbacks.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/sched-deadline-use-the-revised-wakeup-rule-for-suspending-constrained-dl-tasks.patch

7 years, 2 months

1
0
0 0

Patch "x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-efi-disable-runtime-services-on-kexec-kernel-if-booted-with-efi-old_map.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Sai Praneeth <sai.praneeth.prakhya(a)intel.com> Date: Fri, 26 May 2017 12:36:49 +0100 Subject: x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map From: Sai Praneeth <sai.praneeth.prakhya(a)intel.com> [ Upstream commit 4e52797d2efefac3271abdc54439a3435abd77b9 ] Booting kexec kernel with "efi=old_map" in kernel command line hits kernel panic as shown below. BUG: unable to handle kernel paging request at ffff88007fe78070 IP: virt_efi_set_variable.part.7+0x63/0x1b0 PGD 7ea28067 PUD 7ea2b067 PMD 7ea2d067 PTE 0 [...] Call Trace: virt_efi_set_variable() efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() x86_64_start_reservations() x86_64_start_kernel() start_cpu() [ efi=old_map was never intended to work with kexec. The problem with using efi=old_map is that the virtual addresses are assigned from the memory region used by other kernel mappings; vmalloc() space. Potentially there could be collisions when booting kexec if something else is mapped at the virtual address we allocated for runtime service regions in the initial boot - Matt Fleming ] Since kexec was never intended to work with efi=old_map, disable runtime services in kexec if booted with efi=old_map, so that we don't panic. Tested-by: Lee Chun-Yi <jlee(a)suse.com> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya(a)intel.com> Signed-off-by: Matt Fleming <matt(a)codeblueprint.co.uk> Acked-by: Dave Young <dyoung(a)redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Ravi Shankar <ravi.v.shankar(a)intel.com> Cc: Ricardo Neri <ricardo.neri(a)intel.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: linux-efi(a)vger.kernel.org Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/platform/efi/efi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -832,9 +832,11 @@ static void __init kexec_enter_virtual_m /* * We don't do virtual mode, since we don't do runtime services, on - * non-native EFI + * non-native EFI. With efi=old_map, we don't do runtime services in + * kexec kernel because in the initial boot something else might + * have been mapped at these virtual addresses. */ - if (!efi_is_native()) { + if (!efi_is_native() || efi_enabled(EFI_OLD_MEMMAP)) { efi_memmap_unmap(); clear_bit(EFI_RUNTIME_SERVICES, &efi.flags); return; Patches currently in stable-queue which might be from sai.praneeth.prakhya(a)intel.com are queue-4.9/x86-efi-disable-runtime-services-on-kexec-kernel-if-booted-with-efi-old_map.patch

7 years, 2 months

1
0
0 0

Patch "x86/boot: Declare error() as noreturn" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/boot: Declare error() as noreturn to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-boot-declare-error-as-noreturn.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 21:51:16 -0700 Subject: x86/boot: Declare error() as noreturn From: Kees Cook <keescook(a)chromium.org> [ Upstream commit 60854a12d281e2fa25662fa32ac8022bbff17432 ] The compressed boot function error() is used to halt execution, but it wasn't marked with "noreturn". This fixes that in preparation for supporting kernel FORTIFY_SOURCE, which uses the noreturn annotation on panic, and calls error(). GCC would warn about a noreturn function calling a non-noreturn function: arch/x86/boot/compressed/misc.c: In function ‘fortify_panic’: arch/x86/boot/compressed/misc.c:416:1: warning: ‘noreturn’ function does return } ^ Signed-off-by: Kees Cook <keescook(a)chromium.org> Cc: Daniel Micay <danielmicay(a)gmail.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: H. Peter Anvin <hpa(a)zytor.com> Link: http://lkml.kernel.org/r/20170506045116.GA2879@beast Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/boot/compressed/error.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/arch/x86/boot/compressed/error.h +++ b/arch/x86/boot/compressed/error.h @@ -1,7 +1,9 @@ #ifndef BOOT_COMPRESSED_ERROR_H #define BOOT_COMPRESSED_ERROR_H +#include <linux/compiler.h> + void warn(char *m); -void error(char *m); +void error(char *m) __noreturn; #endif /* BOOT_COMPRESSED_ERROR_H */ Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.9/qlge-avoid-reading-past-end-of-buffer.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch queue-4.9/bna-avoid-reading-past-end-of-buffer.patch

7 years, 2 months

1
0
0 0

Patch "X.509: Fix error code in x509_cert_parse()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled X.509: Fix error code in x509_cert_parse() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x.509-fix-error-code-in-x509_cert_parse.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Thu, 8 Jun 2017 14:47:49 +0100 Subject: X.509: Fix error code in x509_cert_parse() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 4e880168e9ffb1cdbdb72b3b48ab0324b30c2d62 ] We forgot to set the error code on this path so it could result in returning NULL which leads to a NULL dereference. Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: David Howells <dhowells(a)redhat.com> Signed-off-by: James Morris <james.l.morris(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/asymmetric_keys/x509_cert_parser.c | 1 + 1 file changed, 1 insertion(+) --- a/crypto/asymmetric_keys/x509_cert_parser.c +++ b/crypto/asymmetric_keys/x509_cert_parser.c @@ -102,6 +102,7 @@ struct x509_certificate *x509_cert_parse } } + ret = -ENOMEM; cert->pub->key = kmemdup(ctx->key, ctx->key_size, GFP_KERNEL); if (!cert->pub->key) goto error_decode; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/block-fix-an-error-code-in-add_partition.patch queue-4.9/x.509-fix-error-code-in-x509_cert_parse.patch queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch queue-4.9/drm-amdkfd-null-dereference-involving-create_process.patch queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.9/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.9/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Josh Poimboeuf <jpoimboe(a)redhat.com> Date: Thu, 4 May 2017 09:51:40 -0500 Subject: x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() From: Josh Poimboeuf <jpoimboe(a)redhat.com> [ Upstream commit 42fc6c6cb1662ba2fa727dd01c9473c63be4e3b6 ] Andrey Konovalov reported the following warning while fuzzing the kernel with syzkaller: WARNING: kernel stack regs at ffff8800686869f8 in a.out:4933 has bad 'bp' value c3fc855a10167ec0 The unwinder dump revealed that RBP had a bad value when an interrupt occurred in csum_partial_copy_generic(). That function saves RBP on the stack and then overwrites it, using it as a scratch register. That's problematic because it breaks stack traces if an interrupt occurs in the middle of the function. Replace the usage of RBP with another callee-saved register (R15) so stack traces are no longer affected. Reported-by: Andrey Konovalov <andreyknvl(a)google.com> Tested-by: Andrey Konovalov <andreyknvl(a)google.com> Signed-off-by: Josh Poimboeuf <jpoimboe(a)redhat.com> Cc: Cong Wang <xiyou.wangcong(a)gmail.com> Cc: David S . Miller <davem(a)davemloft.net> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: Eric Dumazet <edumazet(a)google.com> Cc: Kostya Serebryany <kcc(a)google.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Cc: Neil Horman <nhorman(a)tuxdriver.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Vlad Yasevich <vyasevich(a)gmail.com> Cc: linux-sctp(a)vger.kernel.org Cc: netdev <netdev(a)vger.kernel.org> Cc: syzkaller <syzkaller(a)googlegroups.com> Link: http://lkml.kernel.org/r/4b03a961efda5ec9bfe46b7b9c9ad72d1efad343.149390948… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/lib/csum-copy_64.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/arch/x86/lib/csum-copy_64.S +++ b/arch/x86/lib/csum-copy_64.S @@ -55,7 +55,7 @@ ENTRY(csum_partial_copy_generic) movq %r12, 3*8(%rsp) movq %r14, 4*8(%rsp) movq %r13, 5*8(%rsp) - movq %rbp, 6*8(%rsp) + movq %r15, 6*8(%rsp) movq %r8, (%rsp) movq %r9, 1*8(%rsp) @@ -74,7 +74,7 @@ ENTRY(csum_partial_copy_generic) /* main loop. clear in 64 byte blocks */ /* r9: zero, r8: temp2, rbx: temp1, rax: sum, rcx: saved length */ /* r11: temp3, rdx: temp4, r12 loopcnt */ - /* r10: temp5, rbp: temp6, r14 temp7, r13 temp8 */ + /* r10: temp5, r15: temp6, r14 temp7, r13 temp8 */ .p2align 4 .Lloop: source @@ -89,7 +89,7 @@ ENTRY(csum_partial_copy_generic) source movq 32(%rdi), %r10 source - movq 40(%rdi), %rbp + movq 40(%rdi), %r15 source movq 48(%rdi), %r14 source @@ -103,7 +103,7 @@ ENTRY(csum_partial_copy_generic) adcq %r11, %rax adcq %rdx, %rax adcq %r10, %rax - adcq %rbp, %rax + adcq %r15, %rax adcq %r14, %rax adcq %r13, %rax @@ -121,7 +121,7 @@ ENTRY(csum_partial_copy_generic) dest movq %r10, 32(%rsi) dest - movq %rbp, 40(%rsi) + movq %r15, 40(%rsi) dest movq %r14, 48(%rsi) dest @@ -203,7 +203,7 @@ ENTRY(csum_partial_copy_generic) movq 3*8(%rsp), %r12 movq 4*8(%rsp), %r14 movq 5*8(%rsp), %r13 - movq 6*8(%rsp), %rbp + movq 6*8(%rsp), %r15 addq $7*8, %rsp ret Patches currently in stable-queue which might be from jpoimboe(a)redhat.com are queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch

7 years, 2 months

1
0
0 0

Patch "wl1251: check return from call to wl1251_acx_arp_ip_filter" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled wl1251: check return from call to wl1251_acx_arp_ip_filter to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 26 Dec 2017 17:33:18 +0000 Subject: wl1251: check return from call to wl1251_acx_arp_ip_filter From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit ac1181c60822292176ab96912208ec9f9819faf8 ] Currently the less than zero error check on ret is incorrect as it is checking a far earlier ret assignment rather than the return from the call to wl1251_acx_arp_ip_filter. Fix this by adding in the missing assginment. Detected by CoverityScan, CID#1164835 ("Logically dead code") Fixes: 204cc5c44fb6 ("wl1251: implement hardware ARP filtering") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ti/wl1251/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -1200,8 +1200,7 @@ static void wl1251_op_bss_info_changed(s WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS); enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc; - wl1251_acx_arp_ip_filter(wl, enable, addr); - + ret = wl1251_acx_arp_ip_filter(wl, enable, addr); if (ret < 0) goto out_sleep; } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.9/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.9/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.9/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.9/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

7 years, 2 months

1
0
0 0

Patch "watchdog: f71808e_wdt: Add F71868 support" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled watchdog: f71808e_wdt: Add F71868 support to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: watchdog-f71808e_wdt-add-f71868-support.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Maciej S. Szmigiero" <mail(a)maciej.szmigiero.name> Date: Mon, 17 Apr 2017 22:37:05 +0200 Subject: watchdog: f71808e_wdt: Add F71868 support From: "Maciej S. Szmigiero" <mail(a)maciej.szmigiero.name> [ Upstream commit 166fbcf88fdafa02f784ec25ac64745c716b2de0 ] This adds support for watchdog part of Fintek F71868 Super I/O chip to f71808e_wdt driver. The F71868 chip is, in general, very similar to a F71869, however it has slightly different set of available reset pulse widths. Tested on MSI A55M-P33 motherboard. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> Reviewed-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim(a)iguana.be> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/watchdog/Kconfig | 7 ++++--- drivers/watchdog/f71808e_wdt.c | 27 ++++++++++++++++++++------- 2 files changed, 24 insertions(+), 10 deletions(-) --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -799,11 +799,12 @@ config EBC_C384_WDT the timeout module parameter. config F71808E_WDT - tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" + tristate "Fintek F718xx, F818xx Super I/O Watchdog" depends on X86 help - This is the driver for the hardware watchdog on the Fintek - F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. + This is the driver for the hardware watchdog on the Fintek F71808E, + F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866 + Super I/O controllers. You can compile this driver directly into the kernel, or use it as a module. The module will be called f71808e_wdt. --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -57,6 +57,7 @@ #define SIO_F71808_ID 0x0901 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71868_ID 0x1106 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ #define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ @@ -101,7 +102,7 @@ MODULE_PARM_DESC(timeout, static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; module_param(pulse_width, uint, 0); MODULE_PARM_DESC(pulse_width, - "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" + "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms" " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; @@ -119,13 +120,14 @@ module_param(start_withtimeout, uint, 0) MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" " given initial timeout. Zero (default) disables this feature."); -enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865, - f81866}; +enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, + f81865, f81866}; static const char *f71808e_names[] = { "f71808fg", "f71858fg", "f71862fg", + "f71868", "f71869", "f71882fg", "f71889fg", @@ -252,16 +254,23 @@ static int watchdog_set_timeout(int time static int watchdog_set_pulse_width(unsigned int pw) { int err = 0; + unsigned int t1 = 25, t2 = 125, t3 = 5000; + + if (watchdog.type == f71868) { + t1 = 30; + t2 = 150; + t3 = 6000; + } mutex_lock(&watchdog.lock); - if (pw <= 1) { + if (pw <= 1) { watchdog.pulse_val = 0; - } else if (pw <= 25) { + } else if (pw <= t1) { watchdog.pulse_val = 1; - } else if (pw <= 125) { + } else if (pw <= t2) { watchdog.pulse_val = 2; - } else if (pw <= 5000) { + } else if (pw <= t3) { watchdog.pulse_val = 3; } else { pr_err("pulse width out of range\n"); @@ -354,6 +363,7 @@ static int watchdog_start(void) goto exit_superio; break; + case f71868: case f71869: /* GPIO14 --> WDTRST# */ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4); @@ -792,6 +802,9 @@ static int __init f71808e_find(int sioad watchdog.type = f71862fg; err = f71862fg_pin_configure(0); /* validate module parameter */ break; + case SIO_F71868_ID: + watchdog.type = f71868; + break; case SIO_F71869_ID: case SIO_F71869A_ID: watchdog.type = f71869; Patches currently in stable-queue which might be from mail(a)maciej.szmigiero.name are queue-4.9/watchdog-f71808e_wdt-add-f71868-support.patch

7 years, 2 months

1
0
0 0

Patch "vmxnet3: ensure that adapter is in proper state during force_close" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vmxnet3: ensure that adapter is in proper state during force_close to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vmxnet3-ensure-that-adapter-is-in-proper-state-during-force_close.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Neil Horman <nhorman(a)tuxdriver.com> Date: Fri, 12 May 2017 12:00:01 -0400 Subject: vmxnet3: ensure that adapter is in proper state during force_close From: Neil Horman <nhorman(a)tuxdriver.com> [ Upstream commit 1c4d5f51a812a82de97beee24f48ed05c65ebda5 ] There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by: Neil Horman <nhorman(a)tuxdriver.com> CC: Shrikrishna Khare <skhare(a)vmware.com> CC: "VMware, Inc." <pv-drivers(a)vmware.com> CC: "David S. Miller" <davem(a)davemloft.net> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2962,6 +2962,11 @@ vmxnet3_force_close(struct vmxnet3_adapt /* we need to enable NAPI, otherwise dev_close will deadlock */ for (i = 0; i < adapter->num_rx_queues; i++) napi_enable(&adapter->rx_queue[i].napi); + /* + * Need to clear the quiesce bit to ensure that vmxnet3_close + * can quiesce the device properly + */ + clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); dev_close(adapter->netdev); } Patches currently in stable-queue which might be from nhorman(a)tuxdriver.com are queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch queue-4.9/vmxnet3-ensure-that-adapter-is-in-proper-state-during-force_close.patch

7 years, 2 months

1
0
0 0

Patch "vxlan: dont migrate permanent fdb entries during learn" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vxlan: dont migrate permanent fdb entries during learn to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vxlan-dont-migrate-permanent-fdb-entries-during-learn.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Roopa Prabhu <roopa(a)cumulusnetworks.com> Date: Sun, 11 Jun 2017 16:32:50 -0700 Subject: vxlan: dont migrate permanent fdb entries during learn From: Roopa Prabhu <roopa(a)cumulusnetworks.com> [ Upstream commit e0090a9e979de5202c7d16c635dea2f005221073 ] This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae60438 ("vxlan: only migrate dynamic FDB entries") Signed-off-by: Roopa Prabhu <roopa(a)cumulusnetworks.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -930,7 +930,7 @@ static bool vxlan_snoop(struct net_devic return false; /* Don't migrate static entries, drop packets */ - if (f->state & NUD_NOARP) + if (f->state & (NUD_PERMANENT | NUD_NOARP)) return true; if (net_ratelimit()) Patches currently in stable-queue which might be from roopa(a)cumulusnetworks.com are queue-4.9/ipmr-vrf-find-vifs-using-the-actual-device.patch queue-4.9/vxlan-dont-migrate-permanent-fdb-entries-during-learn.patch

7 years, 2 months

1
0
0 0

Patch "VFS: close race between getcwd() and d_move()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled VFS: close race between getcwd() and d_move() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfs-close-race-between-getcwd-and-d_move.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: NeilBrown <neilb(a)suse.com> Date: Fri, 10 Nov 2017 15:45:41 +1100 Subject: VFS: close race between getcwd() and d_move() From: NeilBrown <neilb(a)suse.com> [ Upstream commit 61647823aa920e395afcce4b57c32afb51456cab ] d_move() will call __d_drop() and then __d_rehash() on the dentry being moved. This creates a small window when the dentry appears to be unhashed. Many tests of d_unhashed() are made under ->d_lock and so are safe from racing with this window, but some aren't. In particular, getcwd() calls d_unlinked() (which calls d_unhashed()) without d_lock protection, so it can race. This races has been seen in practice with lustre, which uses d_move() as part of name lookup. See: https://jira.hpdd.intel.com/browse/LU-9735 It could race with a regular rename(), and result in ENOENT instead of either the 'before' or 'after' name. The race can be demonstrated with a simple program which has two threads, one renaming a directory back and forth while another calls getcwd() within that directory: it should never fail, but does. See: https://patchwork.kernel.org/patch/9455345/ We could fix this race by taking d_lock and rechecking when d_unhashed() reports true. Alternately when can remove the window, which is the approach this patch takes. ___d_drop() is introduce which does *not* clear d_hash.pprev so the dentry still appears to be hashed. __d_drop() calls ___d_drop(), then clears d_hash.pprev. __d_move() now uses ___d_drop() and only clears d_hash.pprev when not rehashing. Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/dcache.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) --- a/fs/dcache.c +++ b/fs/dcache.c @@ -461,9 +461,11 @@ static void dentry_lru_add(struct dentry * d_drop() is used mainly for stuff that wants to invalidate a dentry for some * reason (NFS timeouts or autofs deletes). * - * __d_drop requires dentry->d_lock. + * __d_drop requires dentry->d_lock + * ___d_drop doesn't mark dentry as "unhashed" + * (dentry->d_hash.pprev will be LIST_POISON2, not NULL). */ -void __d_drop(struct dentry *dentry) +static void ___d_drop(struct dentry *dentry) { if (!d_unhashed(dentry)) { struct hlist_bl_head *b; @@ -479,12 +481,17 @@ void __d_drop(struct dentry *dentry) hlist_bl_lock(b); __hlist_bl_del(&dentry->d_hash); - dentry->d_hash.pprev = NULL; hlist_bl_unlock(b); /* After this call, in-progress rcu-walk path lookup will fail. */ write_seqcount_invalidate(&dentry->d_seq); } } + +void __d_drop(struct dentry *dentry) +{ + ___d_drop(dentry); + dentry->d_hash.pprev = NULL; +} EXPORT_SYMBOL(__d_drop); void d_drop(struct dentry *dentry) @@ -2378,7 +2385,7 @@ EXPORT_SYMBOL(d_delete); static void __d_rehash(struct dentry *entry) { struct hlist_bl_head *b = d_hash(entry->d_name.hash); - BUG_ON(!d_unhashed(entry)); + hlist_bl_lock(b); hlist_bl_add_head_rcu(&entry->d_hash, b); hlist_bl_unlock(b); @@ -2815,9 +2822,9 @@ static void __d_move(struct dentry *dent write_seqcount_begin_nested(&target->d_seq, DENTRY_D_LOCK_NESTED); /* unhash both */ - /* __d_drop does write_seqcount_barrier, but they're OK to nest. */ - __d_drop(dentry); - __d_drop(target); + /* ___d_drop does write_seqcount_barrier, but they're OK to nest. */ + ___d_drop(dentry); + ___d_drop(target); /* Switch the names.. */ if (exchange) @@ -2829,6 +2836,8 @@ static void __d_move(struct dentry *dent __d_rehash(dentry); if (exchange) __d_rehash(target); + else + target->d_hash.pprev = NULL; /* ... and switch them in the tree */ if (IS_ROOT(dentry)) { Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.9/vfs-close-race-between-getcwd-and-d_move.patch queue-4.9/sunrpc-ensure-correct-error-is-reported-by-xs_tcp_setup_socket.patch

7 years, 2 months

1
0
0 0

Patch "vfb: fix video mode and line_length being set when loaded" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vfb: fix video mode and line_length being set when loaded to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> Date: Thu, 4 Jan 2018 16:53:50 +0100 Subject: vfb: fix video mode and line_length being set when loaded From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> [ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ] Currently, when loading the vfb module, the newly created fbdev has a line_length of 0, and its video mode would be PSEUDOCOLOR regardless of color depth. (The former could be worked around by calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE flag set.) This patch automatically sets the line_length correctly, and the video mode is derived from the bit depth now as well. Thanks to Geert Uytterhoeven for confirming the bug and helping me with the patch. Output of `fbset -i' before the patch: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : PSEUDOCOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 0 <-- note this Accelerator : No After: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : TRUECOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 5464 Accelerator : No Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy(a)national.shitposting.agency> Reviewed-by: Geert Uytterhoeven <geert(a)linux-m68k.org> [b.zolnierkie: minor fixups] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/vfb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/drivers/video/fbdev/vfb.c +++ b/drivers/video/fbdev/vfb.c @@ -239,8 +239,23 @@ static int vfb_check_var(struct fb_var_s */ static int vfb_set_par(struct fb_info *info) { + switch (info->var.bits_per_pixel) { + case 1: + info->fix.visual = FB_VISUAL_MONO01; + break; + case 8: + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + case 16: + case 24: + case 32: + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + } + info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel); + return 0; } @@ -450,6 +465,8 @@ static int vfb_probe(struct platform_dev goto err2; platform_set_drvdata(dev, info); + vfb_set_par(info); + fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n", videomemorysize >> 10); return 0; Patches currently in stable-queue which might be from pcy(a)national.shitposting.agency are queue-4.9/vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch

7 years, 2 months

1
0
0 0

Patch "USB: ene_usb6250: fix SCSI residue overwriting" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: ene_usb6250: fix SCSI residue overwriting to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-ene_usb6250-fix-scsi-residue-overwriting.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Tue, 16 May 2017 11:47:52 -0400 Subject: USB: ene_usb6250: fix SCSI residue overwriting From: Alan Stern <stern(a)rowland.harvard.edu> [ Upstream commit aa18c4b6e0e39bfb00af48734ec24bc189ac9909 ] In the ene_usb6250 sub-driver for usb-storage, the SCSI residue is not reported correctly. The residue is initialized to 0, but this value is overwritten whenever the driver sends firmware to the card reader before performing the current command. As a result, a valid READ or WRITE operation appears to have failed, causing the SCSI core to retry the command multiple times and eventually fail. This patch fixes the problem by resetting the SCSI residue to 0 after sending firmware to the device. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-and-tested-by: Andreas Hartmann <andihartmann(a)01019freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/ene_ub6250.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1942,6 +1942,8 @@ static int ene_load_bincode(struct us_da bcb->CDB[0] = 0xEF; result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0); + if (us->srb != NULL) + scsi_set_resid(us->srb, 0); info->BIN_FLAG = flag; kfree(buf); Patches currently in stable-queue which might be from stern(a)rowland.harvard.edu are queue-4.9/usb-ene_usb6250-fix-first-command-execution.patch queue-4.9/usb-ene_usb6250-fix-scsi-residue-overwriting.patch

7 years, 2 months

1
0
0 0

Patch "USB: ene_usb6250: fix first command execution" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: ene_usb6250: fix first command execution to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-ene_usb6250-fix-first-command-execution.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Tue, 16 May 2017 11:47:42 -0400 Subject: USB: ene_usb6250: fix first command execution From: Alan Stern <stern(a)rowland.harvard.edu> [ Upstream commit 4b309f1c4972c8f09e03ac64fc63510dbf5591a4 ] In the ene_usb6250 sub-driver for usb-storage, the ene_transport() routine is supposed to initialize the driver before executing the current command, if the initialization has not already been performed. However, a bug in the routine causes it to skip the command after doing the initialization. Also, the routine does not return an appropriate error code if either the initialization or the command fails. As a result of the first bug, the first command (a SCSI INQUIRY) is not carried out. The results can be seen in the system log, in the form of a warning message and empty or garbage INQUIRY data: Apr 18 22:40:08 notebook2 kernel: scsi host6: scsi scan: INQUIRY result too short (5), using 36 Apr 18 22:40:08 notebook2 kernel: scsi 6:0:0:0: Direct-Access PQ: 0 ANSI: 0 This patch fixes both errors. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-and-tested-by: Andreas Hartmann <andihartmann(a)01019freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/ene_ub6250.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -2295,21 +2295,22 @@ static int ms_scsi_irp(struct us_data *u static int ene_transport(struct scsi_cmnd *srb, struct us_data *us) { - int result = 0; + int result = USB_STOR_XFER_GOOD; struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); /*US_DEBUG(usb_stor_show_command(us, srb)); */ scsi_set_resid(srb, 0); - if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) { + if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) result = ene_init(us); - } else { + if (result == USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; if (info->SD_Status.Ready) result = sd_scsi_irp(us, srb); if (info->MS_Status.Ready) result = ms_scsi_irp(us, srb); } - return 0; + return result; } static struct scsi_host_template ene_ub6250_host_template; Patches currently in stable-queue which might be from stern(a)rowland.harvard.edu are queue-4.9/usb-ene_usb6250-fix-first-command-execution.patch queue-4.9/usb-ene_usb6250-fix-scsi-residue-overwriting.patch

7 years, 2 months

1
0
0 0

Patch "usb: dwc3: keystone: check return value" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: keystone: check return value to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-keystone-check-return-value.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 13:55:13 +0800 Subject: usb: dwc3: keystone: check return value From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 018047a1dba7636e1f7fdae2cc290a528991d648 ] Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/dwc3-keystone.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -107,6 +107,10 @@ static int kdwc3_probe(struct platform_d return PTR_ERR(kdwc->usbss); kdwc->clk = devm_clk_get(kdwc->dev, "usb"); + if (IS_ERR(kdwc->clk)) { + dev_err(kdwc->dev, "unable to get usb clock\n"); + return PTR_ERR(kdwc->clk); + } error = clk_prepare_enable(kdwc->clk); if (error < 0) { Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/cx25840-fix-unchecked-return-values.patch queue-4.9/usb-dwc3-keystone-check-return-value.patch queue-4.9/rtc-snvs-fix-an-incorrect-check-of-return-value.patch

7 years, 2 months

1
0
0 0

Patch "uio: fix incorrect memory leak cleanup" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uio: fix incorrect memory leak cleanup to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: uio-fix-incorrect-memory-leak-cleanup.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Suman Anna <s-anna(a)ti.com> Date: Tue, 9 May 2017 18:58:24 -0500 Subject: uio: fix incorrect memory leak cleanup From: Suman Anna <s-anna(a)ti.com> [ Upstream commit 0d83539092ddb1ab79b4d65bccb866bf07ea2ccd ] Commit 75f0aef6220d ("uio: fix memory leak") has fixed up some memory leaks during the failure paths of the addition of uio attributes, but still is not correct entirely. A kobject_uevent() failure still needs a kobject_put() and the kobject container structure allocation failure before the kobject_init() doesn't need a kobject_put(). Fix this properly. Fixes: 75f0aef6220d ("uio: fix memory leak") Signed-off-by: Suman Anna <s-anna(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/uio/uio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -279,7 +279,7 @@ static int uio_dev_add_attributes(struct map = kzalloc(sizeof(*map), GFP_KERNEL); if (!map) { ret = -ENOMEM; - goto err_map_kobj; + goto err_map; } kobject_init(&map->kobj, &map_attr_type); map->mem = mem; @@ -289,7 +289,7 @@ static int uio_dev_add_attributes(struct goto err_map_kobj; ret = kobject_uevent(&map->kobj, KOBJ_ADD); if (ret) - goto err_map; + goto err_map_kobj; } for (pi = 0; pi < MAX_UIO_PORT_REGIONS; pi++) { @@ -308,7 +308,7 @@ static int uio_dev_add_attributes(struct portio = kzalloc(sizeof(*portio), GFP_KERNEL); if (!portio) { ret = -ENOMEM; - goto err_portio_kobj; + goto err_portio; } kobject_init(&portio->kobj, &portio_attr_type); portio->port = port; @@ -319,7 +319,7 @@ static int uio_dev_add_attributes(struct goto err_portio_kobj; ret = kobject_uevent(&portio->kobj, KOBJ_ADD); if (ret) - goto err_portio; + goto err_portio_kobj; } return 0; Patches currently in stable-queue which might be from s-anna(a)ti.com are queue-4.9/arm-davinci-da8xx-create-dsp-device-only-when-assigned-memory.patch queue-4.9/uio-fix-incorrect-memory-leak-cleanup.patch

7 years, 2 months

1
0
0 0

Patch "usb: chipidea: properly handle host or gadget initialization failure" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: chipidea: properly handle host or gadget initialization failure to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-chipidea-properly-handle-host-or-gadget-initialization-failure.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jisheng Zhang <jszhang(a)marvell.com> Date: Wed, 26 Apr 2017 16:59:34 +0800 Subject: usb: chipidea: properly handle host or gadget initialization failure From: Jisheng Zhang <jszhang(a)marvell.com> [ Upstream commit c4a0bbbdb7f6e3c37fa6deb3ef28c5ed99da6175 ] If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the error != -ENXIO, as Peter pointed out, "it stands for initialization for host or gadget has failed", so we'd better return failure rather continue. And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should also check ci->roles[CI_ROLE_GADGET]. Signed-off-by: Jisheng Zhang <jszhang(a)marvell.com> Signed-off-by: Peter Chen <peter.chen(a)nxp.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/chipidea/core.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -839,7 +839,7 @@ static inline void ci_role_destroy(struc { ci_hdrc_gadget_destroy(ci); ci_hdrc_host_destroy(ci); - if (ci->is_otg) + if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) ci_hdrc_otg_destroy(ci); } @@ -939,27 +939,35 @@ static int ci_hdrc_probe(struct platform /* initialize role(s) before the interrupt is requested */ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = ci_hdrc_host_init(ci); - if (ret) - dev_info(dev, "doesn't support host\n"); + if (ret) { + if (ret == -ENXIO) + dev_info(dev, "doesn't support host\n"); + else + goto deinit_phy; + } } if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { ret = ci_hdrc_gadget_init(ci); - if (ret) - dev_info(dev, "doesn't support gadget\n"); + if (ret) { + if (ret == -ENXIO) + dev_info(dev, "doesn't support gadget\n"); + else + goto deinit_host; + } } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); ret = -ENODEV; - goto deinit_phy; + goto deinit_gadget; } if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); - goto stop; + goto deinit_gadget; } } @@ -1024,7 +1032,12 @@ static int ci_hdrc_probe(struct platform ci_extcon_unregister(ci); stop: - ci_role_destroy(ci); + if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) + ci_hdrc_otg_destroy(ci); +deinit_gadget: + ci_hdrc_gadget_destroy(ci); +deinit_host: + ci_hdrc_host_destroy(ci); deinit_phy: ci_usb_phy_exit(ci); Patches currently in stable-queue which might be from jszhang(a)marvell.com are queue-4.9/usb-chipidea-properly-handle-host-or-gadget-initialization-failure.patch

7 years, 2 months

1
0
0 0

Patch "ubi: fastmap: Fix slab corruption" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ubi: fastmap: Fix slab corruption to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ubi-fastmap-fix-slab-corruption.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rabin Vincent <rabinv(a)axis.com> Date: Mon, 3 Apr 2017 13:44:11 +0200 Subject: ubi: fastmap: Fix slab corruption From: Rabin Vincent <rabinv(a)axis.com> [ Upstream commit 8a1435880f452430b41374d27ac4a33e7bd381ea ] Booting with UBI fastmap and SLUB debugging enabled results in the following splats. The problem is that ubi_scan_fastmap() moves the fastmap blocks from the scan_ai (allocated in scan_fast()) to the ai allocated in ubi_attach(). This results in two problems: - When the scan_ai is freed, aebs which were allocated from its slab cache are still in use. - When the other ai is being destroyed in destroy_ai(), the arguments to kmem_cache_free() call are incorrect since aebs on its ->fastmap list were allocated with a slab cache from a differnt ai. Fix this by making a copy of the aebs in ubi_scan_fastmap() instead of moving them. ============================================================================= BUG ubi_aeb_slab_cache (Not tainted): Objects remaining in ubi_aeb_slab_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000080 CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8026c47c>] (slab_err+0x78/0x88) [<8026c47c>] (slab_err) from [<802735bc>] (__kmem_cache_shutdown+0x180/0x3e0) [<802735bc>] (__kmem_cache_shutdown) from [<8024e13c>] (shutdown_cache+0x1c/0x60) [<8024e13c>] (shutdown_cache) from [<8024ed64>] (kmem_cache_destroy+0x19c/0x20c) [<8024ed64>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) INFO: Object 0xb33d7e88 @offset=3720 INFO: Allocated in scan_peb+0x608/0x81c age=72 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c kmem_cache_destroy ubi_aeb_slab_cache: Slab cache still has objects CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8024ed80>] (kmem_cache_destroy+0x1b8/0x20c) [<8024ed80>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) cache_from_obj: Wrong slab cache. ubi_aeb_slab_cache but object is from ubi_aeb_slab_cache ------------[ cut here ]------------ WARNING: CPU: 1 PID: 118 at mm/slab.h:354 kmem_cache_free+0x39c/0x450 Modules linked in: CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80120e40>] (__warn+0xf4/0x10c) [<80120e40>] (__warn) from [<80120f20>] (warn_slowpath_null+0x28/0x30) [<80120f20>] (warn_slowpath_null) from [<80271fe0>] (kmem_cache_free+0x39c/0x450) [<80271fe0>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 2bd8396277fd0a0b ]--- ============================================================================= BUG ubi_aeb_slab_cache (Tainted: G B W ): page slab pointer corrupt. ----------------------------------------------------------------------------- INFO: Allocated in scan_peb+0x608/0x81c age=104 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000081 INFO: Object 0xb33d7e88 @offset=3720 fp=0xb33d7da0 Redzone b33d7e80: cc cc cc cc cc cc cc cc ........ Object b33d7e88: 02 00 00 00 01 00 00 00 00 f0 ff 7f ff ff ff ff ................ Object b33d7e98: 00 00 00 00 00 00 00 00 bd 16 00 00 00 00 00 00 ................ Object b33d7ea8: 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 ................ Redzone b33d7eb8: cc cc cc cc .... Padding b33d7f60: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 118 Comm: ubiattach Tainted: G B W 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80271770>] (free_debug_processing+0x320/0x3c4) [<80271770>] (free_debug_processing) from [<80271ad0>] (__slab_free+0x2bc/0x430) [<80271ad0>] (__slab_free) from [<80272024>] (kmem_cache_free+0x3e0/0x450) [<80272024>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) FIX ubi_aeb_slab_cache: Object at 0xb33d7e88 not freed Signed-off-by: Rabin Vincent <rabinv(a)axis.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/ubi/fastmap.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -828,6 +828,24 @@ static int find_fm_anchor(struct ubi_att return ret; } +static struct ubi_ainf_peb *clone_aeb(struct ubi_attach_info *ai, + struct ubi_ainf_peb *old) +{ + struct ubi_ainf_peb *new; + + new = ubi_alloc_aeb(ai, old->pnum, old->ec); + if (!new) + return NULL; + + new->vol_id = old->vol_id; + new->sqnum = old->sqnum; + new->lnum = old->lnum; + new->scrub = old->scrub; + new->copy_flag = old->copy_flag; + + return new; +} + /** * ubi_scan_fastmap - scan the fastmap. * @ubi: UBI device object @@ -847,7 +865,7 @@ int ubi_scan_fastmap(struct ubi_device * struct ubi_vid_hdr *vh; struct ubi_ec_hdr *ech; struct ubi_fastmap_layout *fm; - struct ubi_ainf_peb *tmp_aeb, *aeb; + struct ubi_ainf_peb *aeb; int i, used_blocks, pnum, fm_anchor, ret = 0; size_t fm_size; __be32 crc, tmp_crc; @@ -857,9 +875,16 @@ int ubi_scan_fastmap(struct ubi_device * if (fm_anchor < 0) return UBI_NO_FASTMAP; - /* Move all (possible) fastmap blocks into our new attach structure. */ - list_for_each_entry_safe(aeb, tmp_aeb, &scan_ai->fastmap, u.list) - list_move_tail(&aeb->u.list, &ai->fastmap); + /* Copy all (possible) fastmap blocks into our new attach structure. */ + list_for_each_entry(aeb, &scan_ai->fastmap, u.list) { + struct ubi_ainf_peb *new; + + new = clone_aeb(ai, aeb); + if (!new) + return -ENOMEM; + + list_add(&new->u.list, &ai->fastmap); + } down_write(&ubi->fm_protect); memset(ubi->fm_buf, 0, ubi->fm_size); Patches currently in stable-queue which might be from rabinv(a)axis.com are queue-4.9/ubi-fastmap-fix-slab-corruption.patch queue-4.9/cifs-silence-lockdep-splat-in-cifs_relock_file.patch

7 years, 2 months

1
0
0 0

Patch "tty: n_gsm: Allow ADM response in addition to UA for control dlci" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty: n_gsm: Allow ADM response in addition to UA for control dlci to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Wed, 3 Jan 2018 10:18:03 -0800 Subject: tty: n_gsm: Allow ADM response in addition to UA for control dlci From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial(a)vger.kernel.org Cc: Alan Cox <alan(a)llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal(a)aksignal.cz> Cc: Jiri Slaby <jslaby(a)suse.cz> Cc: Marcel Partap <mpartap(a)gmx.net> Cc: Michael Scott <michael.scott(a)linaro.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Russ Gorby <russ.gorby(a)intel.com> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: Sebastian Reichel <sre(a)kernel.org> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/n_gsm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1467,6 +1467,10 @@ static void gsm_dlci_open(struct gsm_dlc * in which case an opening port goes back to closed and a closing port * is simply put into closed state (any further frames from the other * end will get a DM response) + * + * Some control dlci can stay in ADM mode with other dlci working just + * fine. In that case we can just keep the control dlci open after the + * DLCI_OPENING retries time out. */ static void gsm_dlci_t1(unsigned long data) @@ -1480,8 +1484,15 @@ static void gsm_dlci_t1(unsigned long da if (dlci->retries) { gsm_command(dlci->gsm, dlci->addr, SABM|PF); mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); - } else + } else if (!dlci->addr && gsm->control == (DM | PF)) { + if (debug & 8) + pr_info("DLCI %d opening in ADM mode.\n", + dlci->addr); + gsm_dlci_open(dlci); + } else { gsm_dlci_close(dlci); + } + break; case DLCI_CLOSING: dlci->retries--; @@ -1499,8 +1510,8 @@ static void gsm_dlci_t1(unsigned long da * @dlci: DLCI to open * * Commence opening a DLCI from the Linux side. We issue SABM messages - * to the modem which should then reply with a UA, at which point we - * will move into open state. Opening is done asynchronously with retry + * to the modem which should then reply with a UA or ADM, at which point + * we will move into open state. Opening is done asynchronously with retry * running off timers and the responses. */ Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch

7 years, 2 months

1
0
0 0

Patch "thermal: power_allocator: fix one race condition issue for thermal_instances list" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thermal: power_allocator: fix one race condition issue for thermal_instances list to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Yi Zeng <yizeng(a)asrmicro.com> Date: Tue, 26 Dec 2017 19:22:26 +0800 Subject: thermal: power_allocator: fix one race condition issue for thermal_instances list From: Yi Zeng <yizeng(a)asrmicro.com> [ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by: Yi Zeng <yizeng(a)asrmicro.com> Signed-off-by: Zhang Rui <rui.zhang(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thermal/power_allocator.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -523,6 +523,7 @@ static void allow_maximum_power(struct t struct thermal_instance *instance; struct power_allocator_params *params = tz->governor_data; + mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if ((instance->trip != params->trip_max_desired_temperature) || (!cdev_is_power_actor(instance->cdev))) @@ -534,6 +535,7 @@ static void allow_maximum_power(struct t mutex_unlock(&instance->cdev->lock); thermal_cdev_update(instance->cdev); } + mutex_unlock(&tz->lock); } /** Patches currently in stable-queue which might be from yizeng(a)asrmicro.com are queue-4.9/thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch

7 years, 2 months

1
0
0 0

Patch "tcp: better validation of received ack sequences" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp: better validation of received ack sequences to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-better-validation-of-received-ack-sequences.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Tue, 23 May 2017 15:24:46 -0700 Subject: tcp: better validation of received ack sequences From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit d0e1a1b5a833b625c93d3d49847609350ebd79db ] Paul Fiterau Brostean reported : <quote> Linux TCP stack we analyze exhibits behavior that seems odd to me. The scenario is as follows (all packets have empty payloads, no window scaling, rcv/snd window size should not be a factor): TEST HARNESS (CLIENT) LINUX SERVER 1. - LISTEN (server listen, then accepts) 2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED 3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED 4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED 5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server opts to close the data connection calling "close" on the connection socket) 6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends FIN,ACK with not yet sent acknowledgement number) 7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102 instead of 101, why?) ... (silence from CLIENT) 8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING (retransmission, again ACK is 102) Now, note that packet 6 while having the expected sequence number, acknowledges something that wasn't sent by the server. So I would expect the packet to maybe prompt an ACK response from the server, and then be ignored. Yet it is not ignored and actually leads to an increase of the acknowledgement number in the server's retransmission of the FIN,ACK packet. The explanation I found is that the FIN in packet 6 was processed, despite the acknowledgement number being unacceptable. Further experiments indeed show that the server processes this FIN, transitioning to CLOSING, then on receiving an ACK for the FIN it had send in packet 5, the server (or better said connection) transitions from CLOSING to TIME_WAIT (as signaled by netstat). </quote> Indeed, tcp_rcv_state_process() calls tcp_ack() but does not exploit the @acceptable status but for TCP_SYN_RECV state. What we want here is to send a challenge ACK, if not in TCP_SYN_RECV state. TCP_FIN_WAIT1 state is not the only state we should fix. Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process() can choose to send a challenge ACK and discard the packet instead of wrongly change socket state. With help from Neal Cardwell. Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reported-by: Paul Fiterau Brostean <p.fiterau-brostean(a)science.ru.nl> Cc: Neal Cardwell <ncardwell(a)google.com> Cc: Yuchung Cheng <ycheng(a)google.com> Cc: Soheil Hassas Yeganeh <soheil(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/tcp_input.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -115,6 +115,7 @@ int sysctl_tcp_invalid_ratelimit __read_ #define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained D-SACK info */ #define FLAG_SACK_RENEGING 0x2000 /* snd_una advanced to a sacked seq */ #define FLAG_UPDATE_TS_RECENT 0x4000 /* tcp_replace_ts_recent() */ +#define FLAG_NO_CHALLENGE_ACK 0x8000 /* do not call tcp_send_challenge_ack() */ #define FLAG_ACKED (FLAG_DATA_ACKED|FLAG_SYN_ACKED) #define FLAG_NOT_DUP (FLAG_DATA|FLAG_WIN_UPDATE|FLAG_ACKED) @@ -3618,7 +3619,8 @@ static int tcp_ack(struct sock *sk, cons if (before(ack, prior_snd_una)) { /* RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] */ if (before(ack, prior_snd_una - tp->max_window)) { - tcp_send_challenge_ack(sk, skb); + if (!(flag & FLAG_NO_CHALLENGE_ACK)) + tcp_send_challenge_ack(sk, skb); return -1; } goto old_ack; @@ -5969,13 +5971,17 @@ int tcp_rcv_state_process(struct sock *s /* step 5: check the ACK field */ acceptable = tcp_ack(sk, skb, FLAG_SLOWPATH | - FLAG_UPDATE_TS_RECENT) > 0; + FLAG_UPDATE_TS_RECENT | + FLAG_NO_CHALLENGE_ACK) > 0; + if (!acceptable) { + if (sk->sk_state == TCP_SYN_RECV) + return 1; /* send one RST */ + tcp_send_challenge_ack(sk, skb); + goto discard; + } switch (sk->sk_state) { case TCP_SYN_RECV: - if (!acceptable) - return 1; - if (!tp->srtt_us) tcp_synack_rtt_meas(sk, req); @@ -6045,14 +6051,6 @@ int tcp_rcv_state_process(struct sock *s * our SYNACK so stop the SYNACK timer. */ if (req) { - /* Return RST if ack_seq is invalid. - * Note that RFC793 only says to generate a - * DUPACK for it but for TCP Fast Open it seems - * better to treat this case like TCP_SYN_RECV - * above. - */ - if (!acceptable) - return 1; /* We no longer need the request sock. */ reqsk_fastopen_remove(sk, req, false); tcp_rearm_rto(sk); Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.9/tcp-better-validation-of-received-ack-sequences.patch queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch queue-4.9/skbuff-only-inherit-relevant-tx_flags.patch

7 years, 2 months

1
0
0 0

Patch "tags: honor COMPILED_SOURCE with apart output directory" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tags: honor COMPILED_SOURCE with apart output directory to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tags-honor-compiled_source-with-apart-output-directory.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Robert Jarzmik <robert.jarzmik(a)free.fr> Date: Mon, 5 Jun 2017 13:59:15 +0200 Subject: tags: honor COMPILED_SOURCE with apart output directory From: Robert Jarzmik <robert.jarzmik(a)free.fr> [ Upstream commit cbf52a3e6a8a92beec6e0c70abf4111cd8f8faf7 ] When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ecf3f8 ("scripts/tags.sh: Support compiled source") Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- scripts/tags.sh | 1 + 1 file changed, 1 insertion(+) --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -106,6 +106,7 @@ all_compiled_sources() case "$i" in *.[cS]) j=${i/\.[cS]/\.o} + j="${j#$tree}" if [ -e $j ]; then echo $i fi Patches currently in stable-queue which might be from robert.jarzmik(a)free.fr are queue-4.9/tags-honor-compiled_source-with-apart-output-directory.patch queue-4.9/backlight-tdo24m-fix-the-spi-cs-between-transfers.patch queue-4.9/pxa_camera-fix-module-remove-codepath-for-v4l2-clock.patch

7 years, 2 months

1
0
0 0

Patch "SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sunrpc-ensure-correct-error-is-reported-by-xs_tcp_setup_socket.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: NeilBrown <neilb(a)suse.com> Date: Thu, 25 May 2017 17:00:32 +1000 Subject: SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() From: NeilBrown <neilb(a)suse.com> [ Upstream commit 6ea44adce91526700535b3150f77f8639ae8c82d ] If you attempt a TCP mount from an host that is unreachable in a way that triggers an immediate error from kernel_connect(), that error does not propagate up, instead EAGAIN is reported. This results in call_connect_status receiving the wrong error. A case that it easy to demonstrate is to attempt to mount from an address that results in ENETUNREACH, but first deleting any default route. Without this patch, the mount.nfs process is persistently runnable and is hard to kill. With this patch it exits as it should. The problem is caused by the fact that xs_tcp_force_close() eventually calls xprt_wake_pending_tasks(xprt, -EAGAIN); which causes an error return of -EAGAIN. so when xs_tcp_setup_sock() calls xprt_wake_pending_tasks(xprt, status); the status is ignored. Fixes: 4efdd92c9211 ("SUNRPC: Remove TCP client connection reset hack") Signed-off-by: NeilBrown <neilb(a)suse.com> Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sunrpc/xprtsock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2384,7 +2384,12 @@ static void xs_tcp_setup_socket(struct w case -EHOSTUNREACH: case -EADDRINUSE: case -ENOBUFS: - /* retry with existing socket, after a delay */ + /* + * xs_tcp_force_close() wakes tasks with -EIO. + * We need to wake them first to ensure the + * correct error code. + */ + xprt_wake_pending_tasks(xprt, status); xs_tcp_force_close(xprt); goto out; } Patches currently in stable-queue which might be from neilb(a)suse.com are queue-4.9/vfs-close-race-between-getcwd-and-d_move.patch queue-4.9/sunrpc-ensure-correct-error-is-reported-by-xs_tcp_setup_socket.patch

7 years, 2 months

1
0
0 0

Patch "stmmac: fix ptp header for GMAC3 hw timestamp" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled stmmac: fix ptp header for GMAC3 hw timestamp to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: stmmac-fix-ptp-header-for-gmac3-hw-timestamp.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Mario Molitor <mario_molitor(a)web.de> Date: Thu, 8 Jun 2017 22:41:02 +0200 Subject: stmmac: fix ptp header for GMAC3 hw timestamp From: Mario Molitor <mario_molitor(a)web.de> [ Upstream commit fd6720aefde06eacf17404eed2cad65c6ec103e1 ] According the CYCLON V documention only the bit 16 of snaptypesel should set. (more information see Table 17-20 (cv_5v4.pdf) : Timestamp Snapshot Dependency on Register Bits) Fixes: d2042052a0aa ("stmmac: update the PTP header file") Signed-off-by: Mario Molitor <mario_molitor(a)web.de> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h | 3 ++- 2 files changed, 14 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -478,7 +478,10 @@ static int stmmac_hwtstamp_ioctl(struct /* PTP v1, UDP, any kind of event packet */ config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; @@ -510,7 +513,10 @@ static int stmmac_hwtstamp_ioctl(struct config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; @@ -544,7 +550,10 @@ static int stmmac_hwtstamp_ioctl(struct config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; /* take time stamp for all event messages */ - snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + if (priv->plat->has_gmac4) + snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1; + else + snap_type_sel = PTP_TCR_SNAPTYPSEL_1; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h @@ -63,7 +63,8 @@ /* Enable Snapshot for Messages Relevant to Master */ #define PTP_TCR_TSMSTRENA BIT(15) /* Select PTP packets for Taking Snapshots */ -#define PTP_TCR_SNAPTYPSEL_1 GENMASK(17, 16) +#define PTP_TCR_SNAPTYPSEL_1 BIT(16) +#define PTP_GMAC4_TCR_SNAPTYPSEL_1 GENMASK(17, 16) /* Enable MAC address for PTP Frame Filtering */ #define PTP_TCR_TSENMACADDR BIT(18) Patches currently in stable-queue which might be from mario_molitor(a)web.de are queue-4.9/stmmac-fix-ptp-header-for-gmac3-hw-timestamp.patch

7 years, 2 months

1
0
0 0

Patch "staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-wlan-ng-prism2mgmt.c-fixed-a-double-endian-conversion-before-calling-hfa384x_drvr_setconfig16-also-fixes-relative-sparse-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Andrea della Porta <sfaragnaus(a)gmail.com> Date: Sat, 29 Apr 2017 07:30:23 +0100 Subject: staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning From: Andrea della Porta <sfaragnaus(a)gmail.com> [ Upstream commit dea20579a69ab68cdca6adf79bb7c0c162eb9b72 ] staging: wlan-ng: prism2mgmt.c: This patches fixes a double endian conversion. cpu_to_le16() was called twice first in prism2mgmt_scan and again inside hfa384x_drvr_setconfig16() for the same variable, hence it was swapped twice. Incidentally, it also fixed the following sparse warning: drivers/staging/wlan-ng/prism2mgmt.c:173:30: warning: incorrect type in assignment (different base types) drivers/staging/wlan-ng/prism2mgmt.c:173:30: expected unsigned short [unsigned] [usertype] word drivers/staging/wlan-ng/prism2mgmt.c:173:30: got restricted __le16 [usertype] <noident> Unfortunately, only compile tested. Signed-off-by: Andrea della Porta <sfaragnaus(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/wlan-ng/prism2mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/staging/wlan-ng/prism2mgmt.c +++ b/drivers/staging/wlan-ng/prism2mgmt.c @@ -169,7 +169,7 @@ int prism2mgmt_scan(struct wlandevice *w hw->ident_sta_fw.variant) > HFA384x_FIRMWARE_VERSION(1, 5, 0)) { if (msg->scantype.data != P80211ENUM_scantype_active) - word = cpu_to_le16(msg->maxchanneltime.data); + word = msg->maxchanneltime.data; else word = 0; Patches currently in stable-queue which might be from sfaragnaus(a)gmail.com are queue-4.9/staging-wlan-ng-prism2mgmt.c-fixed-a-double-endian-conversion-before-calling-hfa384x_drvr_setconfig16-also-fixes-relative-sparse-warning.patch

7 years, 2 months

1
0
0 0

Patch "sparc64: ldc abort during vds iso boot" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sparc64: ldc abort during vds iso boot to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sparc64-ldc-abort-during-vds-iso-boot.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jag Raman <jag.raman(a)oracle.com> Date: Fri, 9 Jun 2017 12:29:31 -0400 Subject: sparc64: ldc abort during vds iso boot From: Jag Raman <jag.raman(a)oracle.com> [ Upstream commit 6c95483b768c62f8ee933ae08a1bdbcb78b5410f ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by: Jagannathan Raman <jag.raman(a)oracle.com> Reviewed-by: Aaron Young <aaron.young(a)oracle.com> Reviewed-by: Alexandre Chartre <alexandre.chartre(a)oracle.com> Reviewed-by: Bijan Mottahedeh <bijan.mottahedeh(a)oracle.com> Reviewed-by: Liam Merwick <liam.merwick(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sparc/kernel/ldc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/arch/sparc/kernel/ldc.c +++ b/arch/sparc/kernel/ldc.c @@ -1733,9 +1733,14 @@ static int read_nonraw(struct ldc_channe lp->rcv_nxt = p->seqid; + /* + * If this is a control-only packet, there is nothing + * else to do but advance the rx queue since the packet + * was already processed above. + */ if (!(p->type & LDC_DATA)) { new = rx_advance(lp, new); - goto no_data; + break; } if (p->stype & (LDC_ACK | LDC_NACK)) { err = data_ack_nack(lp, p); Patches currently in stable-queue which might be from jag.raman(a)oracle.com are queue-4.9/sparc64-ldc-abort-during-vds-iso-boot.patch

7 years, 2 months

1
0
0 0

Patch "skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Date: Sun, 4 Jun 2017 04:16:22 +0200 Subject: skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 48a1df65334b74bd7531f932cca5928932abf769 ] This is a defense-in-depth measure in response to bugs like 4d6fa57b4dab ("macsec: avoid heap overflow in skb_to_sgvec"). There's not only a potential overflow of sglist items, but also a stack overflow potential, so we fix this by limiting the amount of recursion this function is allowed to do. Not actually providing a bounded base case is a future disaster that we can easily avoid here. As a small matter of house keeping, we take this opportunity to move the documentation comment over the actual function the documentation is for. While this could be implemented by using an explicit stack of skbuffs, when implementing this, the function complexity increased considerably, and I don't think such complexity and bloat is actually worth it. So, instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS, and measured the stack usage there. I also reverted the recent MIPS changes that give it a separate IRQ stack, so that I could experience some worst-case situations. I found that limiting it to 24 layers deep yielded a good stack usage with room for safety, as well as being much deeper than any driver actually ever creates. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: Steffen Klassert <steffen.klassert(a)secunet.com> Cc: Herbert Xu <herbert(a)gondor.apana.org.au> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: David Howells <dhowells(a)redhat.com> Cc: Sabrina Dubroca <sd(a)queasysnail.net> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/skbuff.h | 8 +++--- net/core/skbuff.c | 65 +++++++++++++++++++++++++++++++------------------ 2 files changed, 46 insertions(+), 27 deletions(-) --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -984,10 +984,10 @@ struct sk_buff *skb_realloc_headroom(str unsigned int headroom); struct sk_buff *skb_copy_expand(const struct sk_buff *skb, int newheadroom, int newtailroom, gfp_t priority); -int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, - int offset, int len); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, - int len); +int __must_check skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); +int __must_check skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, + int offset, int len); int skb_cow_data(struct sk_buff *skb, int tailbits, struct sk_buff **trailer); int skb_pad(struct sk_buff *skb, int pad); #define dev_kfree_skb(a) consume_skb(a) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3475,24 +3475,18 @@ void __init skb_init(void) NULL); } -/** - * skb_to_sgvec - Fill a scatter-gather list from a socket buffer - * @skb: Socket buffer containing the buffers to be mapped - * @sg: The scatter-gather list to map into - * @offset: The offset into the buffer's contents to start mapping - * @len: Length of buffer space to be mapped - * - * Fill the specified scatter-gather list with mappings/pointers into a - * region of the buffer space attached to a socket buffer. - */ static int -__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len, + unsigned int recursion_level) { int start = skb_headlen(skb); int i, copy = start - offset; struct sk_buff *frag_iter; int elt = 0; + if (unlikely(recursion_level >= 24)) + return -EMSGSIZE; + if (copy > 0) { if (copy > len) copy = len; @@ -3511,6 +3505,8 @@ __skb_to_sgvec(struct sk_buff *skb, stru end = start + skb_frag_size(&skb_shinfo(skb)->frags[i]); if ((copy = end - offset) > 0) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; if (copy > len) copy = len; @@ -3525,16 +3521,22 @@ __skb_to_sgvec(struct sk_buff *skb, stru } skb_walk_frags(skb, frag_iter) { - int end; + int end, ret; WARN_ON(start > offset + len); end = start + frag_iter->len; if ((copy = end - offset) > 0) { + if (unlikely(elt && sg_is_last(&sg[elt - 1]))) + return -EMSGSIZE; + if (copy > len) copy = len; - elt += __skb_to_sgvec(frag_iter, sg+elt, offset - start, - copy); + ret = __skb_to_sgvec(frag_iter, sg+elt, offset - start, + copy, recursion_level + 1); + if (unlikely(ret < 0)) + return ret; + elt += ret; if ((len -= copy) == 0) return elt; offset += copy; @@ -3545,6 +3547,31 @@ __skb_to_sgvec(struct sk_buff *skb, stru return elt; } +/** + * skb_to_sgvec - Fill a scatter-gather list from a socket buffer + * @skb: Socket buffer containing the buffers to be mapped + * @sg: The scatter-gather list to map into + * @offset: The offset into the buffer's contents to start mapping + * @len: Length of buffer space to be mapped + * + * Fill the specified scatter-gather list with mappings/pointers into a + * region of the buffer space attached to a socket buffer. Returns either + * the number of scatterlist items used, or -EMSGSIZE if the contents + * could not fit. + */ +int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) +{ + int nsg = __skb_to_sgvec(skb, sg, offset, len, 0); + + if (nsg <= 0) + return nsg; + + sg_mark_end(&sg[nsg - 1]); + + return nsg; +} +EXPORT_SYMBOL_GPL(skb_to_sgvec); + /* As compared with skb_to_sgvec, skb_to_sgvec_nomark only map skb to given * sglist without mark the sg which contain last skb data as the end. * So the caller can mannipulate sg list as will when padding new data after @@ -3567,19 +3594,11 @@ __skb_to_sgvec(struct sk_buff *skb, stru int skb_to_sgvec_nomark(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) { - return __skb_to_sgvec(skb, sg, offset, len); + return __skb_to_sgvec(skb, sg, offset, len, 0); } EXPORT_SYMBOL_GPL(skb_to_sgvec_nomark); -int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len) -{ - int nsg = __skb_to_sgvec(skb, sg, offset, len); - sg_mark_end(&sg[nsg - 1]); - - return nsg; -} -EXPORT_SYMBOL_GPL(skb_to_sgvec); /** * skb_cow_data - Check that a socket buffer's data buffers are writable Patches currently in stable-queue which might be from Jason(a)zx2c4.com are queue-4.9/ipsec-check-return-value-of-skb_to_sgvec-always.patch queue-4.9/skbuff-return-emsgsize-in-skb_to_sgvec-to-prevent-overflow.patch queue-4.9/macsec-check-return-value-of-skb_to_sgvec-always.patch

7 years, 2 months

1
0
0 0

Patch "SMB2: Fix share type handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled SMB2: Fix share type handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: smb2-fix-share-type-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Fri, 12 May 2017 17:59:32 +0200 Subject: SMB2: Fix share type handling From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit cd1230070ae1c12fd34cf6a557bfa81bf9311009 ] In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a7d5b ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Acked-by: Aurelien Aptel <aaptel(a)suse.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/smb2pdu.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1151,15 +1151,19 @@ SMB2_tcon(const unsigned int xid, struct goto tcon_exit; } - if (rsp->ShareType & SMB2_SHARE_TYPE_DISK) + switch (rsp->ShareType) { + case SMB2_SHARE_TYPE_DISK: cifs_dbg(FYI, "connection to disk share\n"); - else if (rsp->ShareType & SMB2_SHARE_TYPE_PIPE) { + break; + case SMB2_SHARE_TYPE_PIPE: tcon->ipc = true; cifs_dbg(FYI, "connection to pipe share\n"); - } else if (rsp->ShareType & SMB2_SHARE_TYPE_PRINT) { - tcon->print = true; + break; + case SMB2_SHARE_TYPE_PRINT: + tcon->ipc = true; cifs_dbg(FYI, "connection to printer\n"); - } else { + break; + default: cifs_dbg(VFS, "unknown share type %d\n", rsp->ShareType); rc = -EOPNOTSUPP; goto tcon_error_exit; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.9/cpuidle-dt-add-missing-of_node_put.patch queue-4.9/drm-vc4-fix-resource-leak-in-vc4_get_hang_state_ioctl-in-error-handling-path.patch queue-4.9/edac-mv64x60-fix-an-error-handling-path.patch queue-4.9/smb2-fix-share-type-handling.patch queue-4.9/asoc-intel-sst-fix-the-return-value-of-sst_send_byte_stream_mrfld.patch

7 years, 2 months

1
0
0 0

Patch "skbuff: only inherit relevant tx_flags" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled skbuff: only inherit relevant tx_flags to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: skbuff-only-inherit-relevant-tx_flags.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Willem de Bruijn <willemb(a)google.com> Date: Thu, 8 Jun 2017 11:35:03 -0400 Subject: skbuff: only inherit relevant tx_flags From: Willem de Bruijn <willemb(a)google.com> [ Upstream commit fff88030b3ff930ca7a3d74acfee0472f33887ea ] When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by: Willem de Bruijn <willemb(a)google.com> Acked-by: Soheil Hassas Yeganeh <soheil(a)google.com> Acked-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/skbuff.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2615,7 +2615,8 @@ void skb_split(struct sk_buff *skb, stru { int pos = skb_headlen(skb); - skb_shinfo(skb1)->tx_flags = skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG; + skb_shinfo(skb1)->tx_flags |= skb_shinfo(skb)->tx_flags & + SKBTX_SHARED_FRAG; if (len < pos) /* Split line is inside header. */ skb_split_inside_header(skb, skb1, len, pos); else /* Second chunk has no header, nothing to copy. */ @@ -3228,8 +3229,8 @@ normal: skb_copy_from_linear_data_offset(head_skb, offset, skb_put(nskb, hsize), hsize); - skb_shinfo(nskb)->tx_flags = skb_shinfo(head_skb)->tx_flags & - SKBTX_SHARED_FRAG; + skb_shinfo(nskb)->tx_flags |= skb_shinfo(head_skb)->tx_flags & + SKBTX_SHARED_FRAG; while (pos < offset + len) { if (i >= nfrags) { @@ -3881,7 +3882,8 @@ void __skb_tstamp_tx(struct sk_buff *ori return; if (tsonly) { - skb_shinfo(skb)->tx_flags = skb_shinfo(orig_skb)->tx_flags; + skb_shinfo(skb)->tx_flags |= skb_shinfo(orig_skb)->tx_flags & + SKBTX_ANY_TSTAMP; skb_shinfo(skb)->tskey = skb_shinfo(orig_skb)->tskey; } Patches currently in stable-queue which might be from willemb(a)google.com are queue-4.9/skbuff-only-inherit-relevant-tx_flags.patch

7 years, 2 months

1
0
0 0

Patch "sit: reload iphdr in ipip6_rcv" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sit: reload iphdr in ipip6_rcv to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sit-reload-iphdr-in-ipip6_rcv.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Date: Sun, 4 Jun 2017 14:43:43 +0800 Subject: sit: reload iphdr in ipip6_rcv From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> [ Upstream commit b699d0035836f6712917a41e7ae58d84359b8ff9 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/sit.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -657,6 +657,7 @@ static int ipip6_rcv(struct sk_buff *skb if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6), !net_eq(tunnel->net, dev_net(tunnel->dev)))) goto out; + iph = ip_hdr(skb); err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { Patches currently in stable-queue which might be from yanhaishuang(a)cmss.chinamobile.com are queue-4.9/sit-reload-iphdr-in-ipip6_rcv.patch

7 years, 2 months

1
0
0 0

Patch "signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Sat, 19 Aug 2017 15:26:01 -0500 Subject: signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Paul Mackerras <paulus(a)samba.org> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: linuxppc-dev(a)lists.ozlabs.org Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx") Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++ arch/powerpc/kernel/traps.c | 10 +++++----- 2 files changed, 20 insertions(+), 5 deletions(-) --- a/arch/powerpc/include/uapi/asm/siginfo.h +++ b/arch/powerpc/include/uapi/asm/siginfo.h @@ -17,4 +17,19 @@ #undef NSIGTRAP #define NSIGTRAP 4 +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + + #endif /* _ASM_POWERPC_SIGINFO_H */ --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -793,7 +793,7 @@ void unknown_exception(struct pt_regs *r printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); exception_exit(prev_state); } @@ -815,7 +815,7 @@ bail: void RunModeException(struct pt_regs *regs) { - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); } void single_step_exception(struct pt_regs *regs) @@ -851,7 +851,7 @@ static void emulate_single_step(struct p static inline int __parse_fpscr(unsigned long fpscr) { - int ret = 0; + int ret = FPE_FIXME; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) @@ -1855,7 +1855,7 @@ void SPEFloatingPointException(struct pt extern int do_spe_mathemu(struct pt_regs *regs); unsigned long spefscr; int fpexc_mode; - int code = 0; + int code = FPE_FIXME; int err; flush_spe_to_thread(current); @@ -1924,7 +1924,7 @@ void SPEFloatingPointRoundException(stru printk(KERN_ERR "unrecognized spe instruction " "in %s at %lx\n", current->comm, regs->nip); } else { - _exception(SIGFPE, regs, 0, regs->nip); + _exception(SIGFPE, regs, FPE_FIXME, regs->nip); return; } } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 2 months

1
0
0 0

Patch "signal/metag: Document a conflict with SI_USER with SIGFPE" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/metag: Document a conflict with SI_USER with SIGFPE to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 10:37:40 -0500 Subject: signal/metag: Document a conflict with SI_USER with SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit b80328be53c215346b153769267b38f531d89b4f ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result hat uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: James Hogan <james.hogan(a)imgtec.com> Cc: linux-metag(a)vger.kernel.org Ref: ac919f0883e5 ("metag: Traps") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/metag/include/uapi/asm/siginfo.h | 7 +++++++ arch/metag/kernel/traps.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) --- a/arch/metag/include/uapi/asm/siginfo.h +++ b/arch/metag/include/uapi/asm/siginfo.h @@ -5,4 +5,11 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif --- a/arch/metag/kernel/traps.c +++ b/arch/metag/kernel/traps.c @@ -732,7 +732,7 @@ TBIRES fpe_handler(TBIRES State, int Sig else if (error_state & TXSTAT_FPE_INEXACT_BIT) info.si_code = FPE_FLTRES; else - info.si_code = 0; + info.si_code = FPE_FIXME; info.si_errno = 0; info.si_addr = (__force void __user *)regs->ctx.CurrPC; force_sig_info(SIGFPE, &info, current); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 2 months

1
0
0 0

Patch "serial: sh-sci: Fix race condition causing garbage during shutdown" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix race condition causing garbage during shutdown to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Tue, 25 Apr 2017 20:15:35 +0200 Subject: serial: sh-sci: Fix race condition causing garbage during shutdown From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ] If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes. To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len. Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)"). Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sh-sci.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1545,7 +1545,16 @@ static void sci_free_dma(struct uart_por if (s->chan_rx) sci_rx_dma_release(s, false); } -#else + +static void sci_flush_buffer(struct uart_port *port) +{ + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly. + */ + to_sci_port(port)->tx_dma_len = 0; +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) { } @@ -1553,7 +1562,9 @@ static inline void sci_request_dma(struc static inline void sci_free_dma(struct uart_port *port) { } -#endif + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { @@ -2551,6 +2562,7 @@ static const struct uart_ops sci_uart_op .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, .set_termios = sci_set_termios, .pm = sci_pm, .type = sci_type, Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 2 months

1
0
0 0

Patch "sh_eth: Use platform device for printing before register_netdev()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sh_eth: Use platform device for printing before register_netdev() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sh_eth-use-platform-device-for-printing-before-register_netdev.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Thu, 18 May 2017 15:01:34 +0200 Subject: sh_eth: Use platform device for printing before register_netdev() From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ] The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3133,7 +3133,7 @@ static int sh_eth_drv_probe(struct platf /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&ndev->dev, "failed to initialise MDIO\n"); + dev_err(&pdev->dev, "failed to initialise MDIO\n"); goto out_release; } Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 2 months

1
0
0 0

Patch "serial: 8250: omap: Disable DMA for console UART" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250: omap: Disable DMA for console UART to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250-omap-disable-dma-for-console-uart.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vignesh R <vigneshr(a)ti.com> Date: Sat, 22 Apr 2017 18:37:19 +0530 Subject: serial: 8250: omap: Disable DMA for console UART From: Vignesh R <vigneshr(a)ti.com> [ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ] Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R <vigneshr(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_omap.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { Patches currently in stable-queue which might be from vigneshr(a)ti.com are queue-4.9/serial-8250-omap-disable-dma-for-console-uart.patch

7 years, 2 months

1
0
0 0

Patch "selinux: do not check open permission on sockets" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selinux: do not check open permission on sockets to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selinux-do-not-check-open-permission-on-sockets.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Stephen Smalley <sds(a)tycho.nsa.gov> Date: Fri, 12 May 2017 12:41:24 -0400 Subject: selinux: do not check open permission on sockets From: Stephen Smalley <sds(a)tycho.nsa.gov> [ Upstream commit ccb544781d34afdb73a9a73ae53035d824d193bf ] open permission is currently only defined for files in the kernel (COMMON_FILE_PERMS rather than COMMON_FILE_SOCK_PERMS). Construction of an artificial test case that tries to open a socket via /proc/pid/fd will generate a recvfrom avc denial because recvfrom and open happen to map to the same permission bit in socket vs file classes. open of a socket via /proc/pid/fd is not supported by the kernel regardless and will ultimately return ENXIO. But we hit the permission check first and can thus produce these odd/misleading denials. Omit the open check when operating on a socket. Signed-off-by: Stephen Smalley <sds(a)tycho.nsa.gov> Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/selinux/hooks.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2033,8 +2033,9 @@ static inline u32 file_to_av(struct file static inline u32 open_file_to_av(struct file *file) { u32 av = file_to_av(file); + struct inode *inode = file_inode(file); - if (selinux_policycap_openperm) + if (selinux_policycap_openperm && inode->i_sb->s_magic != SOCKFS_MAGIC) av |= FILE__OPEN; return av; @@ -3031,6 +3032,7 @@ static int selinux_inode_permission(stru static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr) { const struct cred *cred = current_cred(); + struct inode *inode = d_backing_inode(dentry); unsigned int ia_valid = iattr->ia_valid; __u32 av = FILE__WRITE; @@ -3046,8 +3048,10 @@ static int selinux_inode_setattr(struct ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET)) return dentry_has_perm(cred, dentry, FILE__SETATTR); - if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE) - && !(ia_valid & ATTR_FILE)) + if (selinux_policycap_openperm && + inode->i_sb->s_magic != SOCKFS_MAGIC && + (ia_valid & ATTR_SIZE) && + !(ia_valid & ATTR_FILE)) av |= FILE__OPEN; return dentry_has_perm(cred, dentry, av); Patches currently in stable-queue which might be from sds(a)tycho.nsa.gov are queue-4.9/selinux-do-not-check-open-permission-on-sockets.patch

7 years, 2 months

1
0
0 0

Patch "selftests/powerpc: Fix TM resched DSCR test with some compilers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests/powerpc: Fix TM resched DSCR test with some compilers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Fri, 19 May 2017 11:29:04 +1000 Subject: selftests/powerpc: Fix TM resched DSCR test with some compilers From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ] The tm-resched-dscr test has started failing sometimes, depending on what compiler it's built with, eg: test: tm_resched_dscr Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed. !! child died by signal 6 When it fails we see that the compiler doesn't initialise rv to 1 before entering the inline asm block. Although that's counter intuitive, it is allowed because we tell the compiler that the inline asm will write to rv (using "=r"), meaning the original value is irrelevant. Marking it as a read/write parameter would presumably work, but it seems simpler to fix it by setting the initial value of rv in the inline asm. Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Acked-by: Michael Neuling <mikey(a)neuling.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c +++ b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c @@ -42,12 +42,12 @@ int test_body(void) printf("Check DSCR TM context switch: "); fflush(stdout); for (;;) { - rv = 1; asm __volatile__ ( /* set a known value into the DSCR */ "ld 3, %[dscr1];" "mtspr %[sprn_dscr], 3;" + "li %[rv], 1;" /* start and suspend a transaction */ "tbegin.;" "beq 1f;" Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 2 months

1
0
0 0

Patch "sdhci: Advertise 2.0v supply on SDIO host controller" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sdhci: Advertise 2.0v supply on SDIO host controller to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: sdhci: Advertise 2.0v supply on SDIO host controller From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -492,6 +492,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1404,6 +1404,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: Patches currently in stable-queue which might be from andriy.shevchenko(a)linux.intel.com are queue-4.9/gpio-crystalcove-do-not-write-regular-gpio-registers-for-virtual-gpios.patch queue-4.9/sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch

7 years, 2 months

1
0
0 0

Patch "selftests: kselftest_harness: Fix compile warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests: kselftest_harness: Fix compile warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-kselftest_harness-fix-compile-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Mickaël Salaün" <mic(a)digikod.net> Date: Sun, 11 Jun 2017 14:32:58 +0200 Subject: selftests: kselftest_harness: Fix compile warning From: "Mickaël Salaün" <mic(a)digikod.net> [ Upstream commit 34a048cc06802556e5f96f325dc32cc2f6a11225 ] Do not confuse the compiler with a semicolon preceding a block. Replace the semicolon with an empty block to avoid a warning: gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf In file included from seccomp_bpf.c:40:0: seccomp_bpf.c: In function âchange_syscallâ: ../kselftest_harness.h:558:2: warning: this âforâ clause does not guard... [-Wmisleading-indentation] for (; _metadata->trigger; _metadata->trigger = __bail(_assert)) ^ ../kselftest_harness.h:574:14: note: in expansion of macro âOPTIONAL_HANDLERâ } while (0); OPTIONAL_HANDLER(_assert) ^~~~~~~~~~~~~~~~ ../kselftest_harness.h:440:2: note: in expansion of macro â__EXPECTâ __EXPECT(expected, seen, ==, 0) ^~~~~~~~ seccomp_bpf.c:1313:2: note: in expansion of macro âEXPECT_EQâ EXPECT_EQ(0, ret); ^~~~~~~~~ seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the âforâ { ^ Signed-off-by: MickaÃ«l SalaÃ¼n <mic(a)digikod.net> Cc: Andy Lutomirski <luto(a)amacapital.net> Cc: Kees Cook <keescook(a)chromium.org> Cc: Shuah Khan <shuahkh(a)osg.samsung.com> Cc: Will Drewry <wad(a)chromium.org> Acked-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -1318,7 +1318,7 @@ void change_syscall(struct __test_metada iov.iov_len = sizeof(regs); ret = ptrace(PTRACE_GETREGSET, tracee, NT_PRSTATUS, &iov); #endif - EXPECT_EQ(0, ret); + EXPECT_EQ(0, ret) {} #if defined(__x86_64__) || defined(__i386__) || defined(__powerpc__) || \ defined(__s390__) || defined(__hppa__) Patches currently in stable-queue which might be from mic(a)digikod.net are queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch

7 years, 2 months

1
0
0 0

Patch "sctp: fix recursive locking warning in sctp_do_peeloff" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sctp: fix recursive locking warning in sctp_do_peeloff to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sctp-fix-recursive-locking-warning-in-sctp_do_peeloff.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Sat, 10 Jun 2017 14:56:56 +0800 Subject: sctp: fix recursive locking warning in sctp_do_peeloff From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit 6dfe4b97e08ec3d1a593fdaca099f0ef0a3a19e6 ] Dmitry got the following recursive locking report while running syzkaller fuzzer, the Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline] check_deadlock kernel/locking/lockdep.c:1773 [inline] validate_chain kernel/locking/lockdep.c:2251 [inline] __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536 lock_sock include/net/sock.h:1460 [inline] sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x38b/0x870 net/socket.c:1226 sock_create+0x7f/0xa0 net/socket.c:1237 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline] sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690 SYSC_getsockopt net/socket.c:1817 [inline] SyS_getsockopt+0x240/0x380 net/socket.c:1799 entry_SYSCALL_64_fastpath+0x1f/0xc2 This warning is caused by the lock held by sctp_getsockopt() is on one socket, while the other lock that sctp_close() is getting later is on the newly created (which failed) socket during peeloff operation. This patch is to avoid this warning by use lock_sock with subclass SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion. Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Suggested-by: Cong Wang <xiyou.wangcong(a)gmail.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sctp/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1519,7 +1519,7 @@ static void sctp_close(struct sock *sk, pr_debug("%s: sk:%p, timeout:%ld\n", __func__, sk, timeout); - lock_sock(sk); + lock_sock_nested(sk, SINGLE_DEPTH_NESTING); sk->sk_shutdown = SHUTDOWN_MASK; sk->sk_state = SCTP_SS_CLOSING; @@ -1569,7 +1569,7 @@ static void sctp_close(struct sock *sk, * held and that should be grabbed before socket lock. */ spin_lock_bh(&net->sctp.addr_wq_lock); - bh_lock_sock(sk); + bh_lock_sock_nested(sk); /* Hold the sock, since sk_common_release() will put sock_put() * and we have just a little more cleanup. Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.9/sctp-fix-recursive-locking-warning-in-sctp_do_peeloff.patch

7 years, 2 months

1
0
0 0

Patch "scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Chaitra P B <chaitra.basappa(a)broadcom.com> Date: Wed, 27 Dec 2017 23:09:11 -0800 Subject: scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. From: Chaitra P B <chaitra.basappa(a)broadcom.com> [ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ] 1. In IO path, setting of "ATA command pending" flag early before device removal, invalid device handle etc., checks causes any new commands to be always returned with SAM_STAT_BUSY and when the driver removes the drive the SML issues SYNC Cache command and that command is always returned with SAM_STAT_BUSY and thus making SYNC Cache command to requeued. 2. If the driver gets an ATA PT command for a SATA drive then the driver set "ATA command pending" flag in device specific data structure not to allow any further commands until the ATA PT command is completed. However, after setting the flag if the driver decides to return the command back to upper layers without actually issuing to the firmware (i.e., returns from qcmd failure return paths) then the corresponding flag is not cleared and this prevents the driver from sending any new commands to the drive. This patch fixes above two issues by setting of "ATA command pending" flag after checking for whether device deleted, invalid device handle, device busy with task management. And by setting "ATA command pending" flag to false in all of the qcmd failure return paths after setting the flag. Signed-off-by: Chaitra P B <chaitra.basappa(a)broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4065,19 +4065,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; } - /* - * Bug work around for firmware SATL handling. The loop - * is based on atomic operations and ensures consistency - * since we're lockless at this point - */ - do { - if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { - scmd->result = SAM_STAT_BUSY; - scmd->scsi_done(scmd); - return 0; - } - } while (_scsih_set_satl_pending(scmd, true)); - sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4103,6 +4090,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -4124,6 +4124,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (!smid) { pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); + _scsih_set_satl_pending(scmd, false); goto out; } mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -4154,6 +4155,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (mpi_request->DataLength) { if (ioc->build_sg_scmd(ioc, scmd, smid)) { mpt3sas_base_free_smid(ioc, smid); + _scsih_set_satl_pending(scmd, false); goto out; } } else Patches currently in stable-queue which might be from chaitra.basappa(a)broadcom.com are queue-4.9/scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch

7 years, 2 months

1
0
0 0

Patch "scsi: libsas: initialize sas_phy status according to response of DISCOVER" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: initialize sas_phy status according to response of DISCOVER to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: chenxiang <chenxiang66(a)hisilicon.com> Date: Thu, 4 Jan 2018 21:04:33 +0800 Subject: scsi: libsas: initialize sas_phy status according to response of DISCOVER From: chenxiang <chenxiang66(a)hisilicon.com> [ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -282,6 +282,7 @@ static void sas_set_ex_phy(struct domain phy->phy->minimum_linkrate = dr->pmin_linkrate; phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; + phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED); skip: if (new_phy) Patches currently in stable-queue which might be from chenxiang66(a)hisilicon.com are queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 2 months

1
0
0 0

Patch "scsi: libsas: fix memory leak in sas_smp_get_phy_events()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix memory leak in sas_smp_get_phy_events() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:31 +0800 Subject: scsi: libsas: fix memory leak in sas_smp_get_phy_events() From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -684,6 +684,7 @@ int sas_smp_get_phy_events(struct sas_ph phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); out: + kfree(req); kfree(resp); return res; Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 2 months

1
0
0 0

Patch "scsi: libiscsi: Allow sd_shutdown on bad transport" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libiscsi: Allow sd_shutdown on bad transport to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Date: Thu, 7 Dec 2017 19:59:13 -0200 Subject: scsi: libiscsi: Allow sd_shutdown on bad transport From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> [ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Reviewed-by: Lee Duncan <lduncan(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1695,6 +1695,15 @@ int iscsi_queuecommand(struct Scsi_Host */ switch (session->state) { case ISCSI_STATE_FAILED: + /* + * cmds should fail during shutdown, if the session + * state is bad, allowing completion to happen + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + reason = FAILURE_SESSION_FAILED; + sc->result = DID_NO_CONNECT << 16; + break; + } case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; sc->result = DID_IMM_RETRY << 16; @@ -1980,6 +1989,19 @@ static enum blk_eh_timer_return iscsi_eh if (session->state != ISCSI_STATE_LOGGED_IN) { /* + * During shutdown, if session is prematurely disconnected, + * recovery won't happen and there will be hung cmds. Not + * handling cmds would trigger EH, also bad in this case. + * Instead, handle cmd, allow completion to happen and let + * upper layer to deal with the result. + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + sc->result = DID_NO_CONNECT << 16; + ISCSI_DBG_EH(session, "sc on shutdown, handled\n"); + rc = BLK_EH_HANDLED; + goto done; + } + /* * We are probably in the middle of iscsi recovery so let * that complete and handle the error. */ @@ -2083,7 +2105,7 @@ done: task->last_timeout = jiffies; spin_unlock(&session->frwd_lock); ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + "timer reset" : "shutdown or nh"); return rc; } Patches currently in stable-queue which might be from rafael.tinoco(a)canonical.com are queue-4.9/scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch

7 years, 2 months

1
0
0 0

Patch "scsi: libsas: fix error when getting phy events" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix error when getting phy events to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-error-when-getting-phy-events.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:32 +0800 Subject: scsi: libsas: fix error when getting phy events From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -675,7 +675,7 @@ int sas_smp_get_phy_events(struct sas_ph res = smp_execute_task(dev, req, RPEL_REQ_SIZE, resp, RPEL_RESP_SIZE); - if (!res) + if (res) goto out; phy->invalid_dword_count = scsi_to_u32(&resp[12]); Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 2 months

1
0
0 0

Patch "scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-bnx2fc-fix-race-condition-in-bnx2fc_get_host_stats.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Maurizio Lombardi <mlombard(a)redhat.com> Date: Wed, 24 May 2017 14:09:44 +0200 Subject: scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() From: Maurizio Lombardi <mlombard(a)redhat.com> [ Upstream commit c2dd893a3b0772d1c680e109b9d5715d7f73022b ] If multiple tasks attempt to read the stats, it may happen that the start_req_done completion is re-initialized while still being used by another task, causing a list corruption. This patch fixes the bug by adding a mutex to serialize the calls to bnx2fc_get_host_stats(). WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted) Hardware name: PowerEdge R820 list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588 Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1 Call Trace: [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc] [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc] [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc] [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50 [<ffffffff8119a651>] ? sys_read+0x51/0xb0 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b Signed-off-by: Maurizio Lombardi <mlombard(a)redhat.com> Acked-by: Chad Dupuis <chad.dupuis(a)cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/bnx2fc/bnx2fc.h | 1 + drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -191,6 +191,7 @@ struct bnx2fc_hba { struct bnx2fc_cmd_mgr *cmd_mgr; spinlock_t hba_lock; struct mutex hba_mutex; + struct mutex hba_stats_mutex; unsigned long adapter_state; #define ADAPTER_STATE_UP 0 #define ADAPTER_STATE_GOING_DOWN 1 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -670,15 +670,17 @@ static struct fc_host_statistics *bnx2fc if (!fw_stats) return NULL; + mutex_lock(&hba->hba_stats_mutex); + bnx2fc_stats = fc_get_host_stats(shost); init_completion(&hba->stat_req_done); if (bnx2fc_send_stat_req(hba)) - return bnx2fc_stats; + goto unlock_stats_mutex; rc = wait_for_completion_timeout(&hba->stat_req_done, (2 * HZ)); if (!rc) { BNX2FC_HBA_DBG(lport, "FW stat req timed out\n"); - return bnx2fc_stats; + goto unlock_stats_mutex; } BNX2FC_STATS(hba, rx_stat2, fc_crc_cnt); bnx2fc_stats->invalid_crc_count += hba->bfw_stats.fc_crc_cnt; @@ -700,6 +702,9 @@ static struct fc_host_statistics *bnx2fc memcpy(&hba->prev_stats, hba->stats_buffer, sizeof(struct fcoe_statistics_params)); + +unlock_stats_mutex: + mutex_unlock(&hba->hba_stats_mutex); return bnx2fc_stats; } @@ -1348,6 +1353,7 @@ static struct bnx2fc_hba *bnx2fc_hba_cre } spin_lock_init(&hba->hba_lock); mutex_init(&hba->hba_mutex); + mutex_init(&hba->hba_stats_mutex); hba->cnic = cnic; Patches currently in stable-queue which might be from mlombard(a)redhat.com are queue-4.9/scsi-bnx2fc-fix-race-condition-in-bnx2fc_get_host_stats.patch

7 years, 2 months

1
0
0 0

Patch "scsi: csiostor: fix use after free in csio_hw_use_fwconfig()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: csiostor: fix use after free in csio_hw_use_fwconfig() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-csiostor-fix-use-after-free-in-csio_hw_use_fwconfig.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Varun Prakash <varun(a)chelsio.com> Date: Wed, 17 May 2017 20:30:43 +0530 Subject: scsi: csiostor: fix use after free in csio_hw_use_fwconfig() From: Varun Prakash <varun(a)chelsio.com> [ Upstream commit a351e40b6de550049423a26f7ded7b639e363d89 ] mbp pointer is passed to csio_hw_validate_caps() so call mempool_free() after calling csio_hw_validate_caps(). Signed-off-by: Varun Prakash <varun(a)chelsio.com> Fixes: 541c571fa2fd ("csiostor:Use firmware version from cxgb4/t4fw_version.h") Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/csiostor/csio_hw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/scsi/csiostor/csio_hw.c +++ b/drivers/scsi/csiostor/csio_hw.c @@ -1769,7 +1769,6 @@ csio_hw_use_fwconfig(struct csio_hw *hw, goto bye; } - mempool_free(mbp, hw->mb_mempool); if (finicsum != cfcsum) { csio_warn(hw, "Config File checksum mismatch: csum=%#x, computed=%#x\n", @@ -1780,6 +1779,10 @@ csio_hw_use_fwconfig(struct csio_hw *hw, rv = csio_hw_validate_caps(hw, mbp); if (rv != 0) goto bye; + + mempool_free(mbp, hw->mb_mempool); + mbp = NULL; + /* * Note that we're operating with parameters * not supplied by the driver, rather than from hard-wired Patches currently in stable-queue which might be from varun(a)chelsio.com are queue-4.9/scsi-csiostor-fix-use-after-free-in-csio_hw_use_fwconfig.patch

7 years, 2 months

1
0
0 0

Patch "sched/numa: Use down_read_trylock() for the mmap_sem" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/numa: Use down_read_trylock() for the mmap_sem to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-numa-use-down_read_trylock-for-the-mmap_sem.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vlastimil Babka <vbabka(a)suse.cz> Date: Mon, 15 May 2017 15:13:16 +0200 Subject: sched/numa: Use down_read_trylock() for the mmap_sem From: Vlastimil Babka <vbabka(a)suse.cz> [ Upstream commit 8655d5497735b288f8a9b458bd22e7d1bf95bb61 ] A customer has reported a soft-lockup when running an intensive memory stress test, where the trace on multiple CPU's looks like this: RIP: 0010:[<ffffffff810c53fe>] [<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190 ... Call Trace: [<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa [<ffffffff811bc331>] change_protection_range+0x3b1/0x930 [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 [<ffffffff81098322>] task_work_run+0x72/0x90 Further investigation showed that the lock contention here is pmd_lock(). The task_numa_work() function makes sure that only one thread is let to perform the work in a single scan period (via cmpxchg), but if there's a thread with mmap_sem locked for writing for several periods, multiple threads in task_numa_work() can build up a convoy waiting for mmap_sem for read and then all get unblocked at once. This patch changes the down_read() to the trylock version, which prevents the build up. For a workload experiencing mmap_sem contention, it's probably better to postpone the NUMA balancing work anyway. This seems to have fixed the soft lockups involving pmd_lock(), which is in line with the convoy theory. Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Acked-by: Rik van Riel <riel(a)redhat.com> Acked-by: Mel Gorman <mgorman(a)techsingularity.net> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.cz Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/fair.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2429,7 +2429,8 @@ void task_numa_work(struct callback_head return; - down_read(&mm->mmap_sem); + if (!down_read_trylock(&mm->mmap_sem)) + return; vma = find_vma(mm, start); if (!vma) { reset_ptenuma_scan(p); Patches currently in stable-queue which might be from vbabka(a)suse.cz are queue-4.9/sched-numa-use-down_read_trylock-for-the-mmap_sem.patch queue-4.9/mm-vmstat-remove-spurious-warn-during-zoneinfo-print.patch

7 years, 2 months

1
0
0 0

Patch "sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-deadline-use-the-revised-wakeup-rule-for-suspending-constrained-dl-tasks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Daniel Bristot de Oliveira <bristot(a)redhat.com> Date: Mon, 29 May 2017 16:24:03 +0200 Subject: sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks From: Daniel Bristot de Oliveira <bristot(a)redhat.com> [ Upstream commit 3effcb4247e74a51f5d8b775a1ee4abf87cc089a ] We have been facing some problems with self-suspending constrained deadline tasks. The main reason is that the original CBS was not designed for such sort of tasks. One problem reported by Xunlei Pang takes place when a task suspends, and then is awakened before the deadline, but so close to the deadline that its remaining runtime can cause the task to have an absolute density higher than allowed. In such situation, the original CBS assumes that the task is facing an early activation, and so it replenishes the task and set another deadline, one deadline in the future. This rule works fine for implicit deadline tasks. Moreover, it allows the system to adapt the period of a task in which the external event source suffered from a clock drift. However, this opens the window for bandwidth leakage for constrained deadline tasks. For instance, a task with the following parameters: runtime = 5 ms deadline = 7 ms [density] = 5 / 7 = 0.71 period = 1000 ms If the task runs for 1 ms, and then suspends for another 1ms, it will be awakened with the following parameters: remaining runtime = 4 laxity = 5 presenting a absolute density of 4 / 5 = 0.80. In this case, the original CBS would assume the task had an early wakeup. Then, CBS will reset the runtime, and the absolute deadline will be postponed by one relative deadline, allowing the task to run. The problem is that, if the task runs this pattern forever, it will keep receiving bandwidth, being able to run 1ms every 2ms. Following this behavior, the task would be able to run 500 ms in 1 sec. Thus running more than the 5 ms / 1 sec the admission control allowed it to run. Trying to address the self-suspending case, Luca Abeni, Giuseppe Lipari, and Juri Lelli [1] revisited the CBS in order to deal with self-suspending tasks. In the new approach, rather than replenishing/postponing the absolute deadline, the revised wakeup rule adjusts the remaining runtime, reducing it to fit into the allowed density. A revised version of the idea is: At a given time t, the maximum absolute density of a task cannot be higher than its relative density, that is: runtime / (deadline - t) <= dl_runtime / dl_deadline Knowing the laxity of a task (deadline - t), it is possible to move it to the other side of the equality, thus enabling to define max remaining runtime a task can use within the absolute deadline, without over-running the allowed density: runtime = (dl_runtime / dl_deadline) * (deadline - t) For instance, in our previous example, the task could still run: runtime = ( 5 / 7 ) * 5 runtime = 3.57 ms Without causing damage for other deadline tasks. It is note worthy that the laxity cannot be negative because that would cause a negative runtime. Thus, this patch depends on the patch: df8eac8cafce ("sched/deadline: Throttle a constrained deadline task activated after the deadline") Which throttles a constrained deadline task activated after the deadline. Finally, it is also possible to use the revised wakeup rule for all other tasks, but that would require some more discussions about pros and cons. Reported-by: Xunlei Pang <xpang(a)redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot(a)redhat.com> [peterz: replaced dl_is_constrained with dl_is_implicit] Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Juri Lelli <juri.lelli(a)arm.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Luca Abeni <luca.abeni(a)santannapisa.it> Cc: Mike Galbraith <efault(a)gmx.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Romulo Silva de Oliveira <romulo.deoliveira(a)ufsc.br> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta(a)sssup.it> Link: http://lkml.kernel.org/r/5c800ab3a74a168a84ee5f3f84d12a02e11383be.149580380… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/sched.h | 1 kernel/sched/core.c | 2 kernel/sched/deadline.c | 98 ++++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 89 insertions(+), 12 deletions(-) --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1412,6 +1412,7 @@ struct sched_dl_entity { u64 dl_deadline; /* relative deadline of each instance */ u64 dl_period; /* separation of two instances (period) */ u64 dl_bw; /* dl_runtime / dl_deadline */ + u64 dl_density; /* dl_runtime / dl_deadline */ /* * Actual scheduling parameters. Initialized with the values above, --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2184,6 +2184,7 @@ void __dl_clear_params(struct task_struc dl_se->dl_period = 0; dl_se->flags = 0; dl_se->dl_bw = 0; + dl_se->dl_density = 0; dl_se->dl_throttled = 0; dl_se->dl_yielded = 0; @@ -3912,6 +3913,7 @@ __setparam_dl(struct task_struct *p, con dl_se->dl_period = attr->sched_period ?: dl_se->dl_deadline; dl_se->flags = attr->sched_flags; dl_se->dl_bw = to_ratio(dl_se->dl_period, dl_se->dl_runtime); + dl_se->dl_density = to_ratio(dl_se->dl_deadline, dl_se->dl_runtime); /* * Changing the parameters of a task is 'tricky' and we're not doing --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -484,13 +484,84 @@ static bool dl_entity_overflow(struct sc } /* - * When a -deadline entity is queued back on the runqueue, its runtime and - * deadline might need updating. + * Revised wakeup rule [1]: For self-suspending tasks, rather then + * re-initializing task's runtime and deadline, the revised wakeup + * rule adjusts the task's runtime to avoid the task to overrun its + * density. * - * The policy here is that we update the deadline of the entity only if: - * - the current deadline is in the past, - * - using the remaining runtime with the current deadline would make - * the entity exceed its bandwidth. + * Reasoning: a task may overrun the density if: + * runtime / (deadline - t) > dl_runtime / dl_deadline + * + * Therefore, runtime can be adjusted to: + * runtime = (dl_runtime / dl_deadline) * (deadline - t) + * + * In such way that runtime will be equal to the maximum density + * the task can use without breaking any rule. + * + * [1] Luca Abeni, Giuseppe Lipari, and Juri Lelli. 2015. Constant + * bandwidth server revisited. SIGBED Rev. 11, 4 (January 2015), 19-24. + */ +static void +update_dl_revised_wakeup(struct sched_dl_entity *dl_se, struct rq *rq) +{ + u64 laxity = dl_se->deadline - rq_clock(rq); + + /* + * If the task has deadline < period, and the deadline is in the past, + * it should already be throttled before this check. + * + * See update_dl_entity() comments for further details. + */ + WARN_ON(dl_time_before(dl_se->deadline, rq_clock(rq))); + + dl_se->runtime = (dl_se->dl_density * laxity) >> 20; +} + +/* + * Regarding the deadline, a task with implicit deadline has a relative + * deadline == relative period. A task with constrained deadline has a + * relative deadline <= relative period. + * + * We support constrained deadline tasks. However, there are some restrictions + * applied only for tasks which do not have an implicit deadline. See + * update_dl_entity() to know more about such restrictions. + * + * The dl_is_implicit() returns true if the task has an implicit deadline. + */ +static inline bool dl_is_implicit(struct sched_dl_entity *dl_se) +{ + return dl_se->dl_deadline == dl_se->dl_period; +} + +/* + * When a deadline entity is placed in the runqueue, its runtime and deadline + * might need to be updated. This is done by a CBS wake up rule. There are two + * different rules: 1) the original CBS; and 2) the Revisited CBS. + * + * When the task is starting a new period, the Original CBS is used. In this + * case, the runtime is replenished and a new absolute deadline is set. + * + * When a task is queued before the begin of the next period, using the + * remaining runtime and deadline could make the entity to overflow, see + * dl_entity_overflow() to find more about runtime overflow. When such case + * is detected, the runtime and deadline need to be updated. + * + * If the task has an implicit deadline, i.e., deadline == period, the Original + * CBS is applied. the runtime is replenished and a new absolute deadline is + * set, as in the previous cases. + * + * However, the Original CBS does not work properly for tasks with + * deadline < period, which are said to have a constrained deadline. By + * applying the Original CBS, a constrained deadline task would be able to run + * runtime/deadline in a period. With deadline < period, the task would + * overrun the runtime/period allowed bandwidth, breaking the admission test. + * + * In order to prevent this misbehave, the Revisited CBS is used for + * constrained deadline tasks when a runtime overflow is detected. In the + * Revisited CBS, rather than replenishing & setting a new absolute deadline, + * the remaining runtime of the task is reduced to avoid runtime overflow. + * Please refer to the comments update_dl_revised_wakeup() function to find + * more about the Revised CBS rule. */ static void update_dl_entity(struct sched_dl_entity *dl_se, struct sched_dl_entity *pi_se) @@ -500,6 +571,14 @@ static void update_dl_entity(struct sche if (dl_time_before(dl_se->deadline, rq_clock(rq)) || dl_entity_overflow(dl_se, pi_se, rq_clock(rq))) { + + if (unlikely(!dl_is_implicit(dl_se) && + !dl_time_before(dl_se->deadline, rq_clock(rq)) && + !dl_se->dl_boosted)){ + update_dl_revised_wakeup(dl_se, rq); + return; + } + dl_se->deadline = rq_clock(rq) + pi_se->dl_deadline; dl_se->runtime = pi_se->dl_runtime; } @@ -961,11 +1040,6 @@ static void dequeue_dl_entity(struct sch __dequeue_dl_entity(dl_se); } -static inline bool dl_is_constrained(struct sched_dl_entity *dl_se) -{ - return dl_se->dl_deadline < dl_se->dl_period; -} - static void enqueue_task_dl(struct rq *rq, struct task_struct *p, int flags) { struct task_struct *pi_task = rt_mutex_get_top_task(p); @@ -997,7 +1071,7 @@ static void enqueue_task_dl(struct rq *r * If that is the case, the task will be throttled and * the replenishment timer will be set to the next period. */ - if (!p->dl.dl_throttled && dl_is_constrained(&p->dl)) + if (!p->dl.dl_throttled && !dl_is_implicit(&p->dl)) dl_check_constrained_dl(&p->dl); /* Patches currently in stable-queue which might be from bristot(a)redhat.com are queue-4.9/sched-deadline-use-the-revised-wakeup-rule-for-suspending-constrained-dl-tasks.patch

7 years, 2 months

1
0
0 0

Patch "s390: move _text symbol to address higher than zero" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390: move _text symbol to address higher than zero to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-move-_text-symbol-to-address-higher-than-zero.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Date: Thu, 4 May 2017 09:42:22 +0200 Subject: s390: move _text symbol to address higher than zero From: Heiko Carstens <heiko.carstens(a)de.ibm.com> [ Upstream commit d04a4c76f71dd5335f8e499b59617382d84e2b8d ] The perf tool assumes that kernel symbols are never present at address zero. In fact it assumes if functions that map symbols to addresses return zero, that the symbol was not found. Given that s390's _text symbol historically is located at address zero this yields at least a couple of false errors and warnings in one of perf's test cases about not present symbols ("perf test 1"). To fix this simply move the _text symbol to address 0x200, just behind the initial psw and channel program located at the beginning of the kernel image. This is now hard coded within the linker script. I tried a nicer solution which moves the initial psw and channel program into an own section. However that would move the symbols within the "real" head.text section to different addresses, since the ".org" statements within head.S are relative to the head.text section. If there is a new section in front, everything else will be moved. Alternatively I could have adjusted all ".org" statements. But this current solution seems to be the easiest one, since nobody really cares where the _text symbol is actually located. Reported-by: Zvonko Kosic <zkosic(a)linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/s390/kernel/vmlinux.lds.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -31,8 +31,14 @@ SECTIONS { . = 0x00000000; .text : { - _text = .; /* Text and read-only data */ + /* Text and read-only data */ HEAD_TEXT + /* + * E.g. perf doesn't like symbols starting at address zero, + * therefore skip the initial PSW and channel program located + * at address zero and let _text start at 0x200. + */ + _text = 0x200; TEXT_TEXT SCHED_TEXT CPUIDLE_TEXT Patches currently in stable-queue which might be from heiko.carstens(a)de.ibm.com are queue-4.9/s390-move-_text-symbol-to-address-higher-than-zero.patch

7 years, 2 months

1
0
0 0

Patch "rtc: snvs: fix an incorrect check of return value" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: snvs: fix an incorrect check of return value to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-snvs-fix-an-incorrect-check-of-return-value.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 13:43:24 +0800 Subject: rtc: snvs: fix an incorrect check of return value From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 758929005f06f954b7e1c87a1c9fdb44157b228f ] Function devm_regmap_init_mmio() returns an ERR_PTR on error. However, in function snvs_rtc_probe() its return value is checked against NULL. This patch fixes it by checking the return value with IS_ERR(). Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-snvs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/rtc/rtc-snvs.c +++ b/drivers/rtc/rtc-snvs.c @@ -257,7 +257,7 @@ static int snvs_rtc_probe(struct platfor of_property_read_u32(pdev->dev.of_node, "offset", &data->offset); } - if (!data->regmap) { + if (IS_ERR(data->regmap)) { dev_err(&pdev->dev, "Can't find snvs syscon\n"); return -ENODEV; } Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/cx25840-fix-unchecked-return-values.patch queue-4.9/usb-dwc3-keystone-check-return-value.patch queue-4.9/rtc-snvs-fix-an-incorrect-check-of-return-value.patch

7 years, 2 months

1
0
0 0

Patch "s390/dasd: fix hanging safe offline" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/dasd: fix hanging safe offline to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-dasd-fix-hanging-safe-offline.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Stefan Haberland <sth(a)linux.vnet.ibm.com> Date: Thu, 18 May 2017 13:24:45 +0200 Subject: s390/dasd: fix hanging safe offline From: Stefan Haberland <sth(a)linux.vnet.ibm.com> [ Upstream commit e8ac01555d9e464249e8bb122337d6d6e5589ccc ] The safe offline processing may hang forever because it waits for I/O which can not be started because of the offline flag that prevents new I/O from being started. Allow I/O to be started during safe offline processing because in this special case we take care that the queues are empty before throwing away the device. Signed-off-by: Stefan Haberland <sth(a)linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/block/dasd.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1950,8 +1950,12 @@ static int __dasd_device_is_unusable(str { int mask = ~(DASD_STOPPED_DC_WAIT | DASD_UNRESUMED_PM); - if (test_bit(DASD_FLAG_OFFLINE, &device->flags)) { - /* dasd is being set offline. */ + if (test_bit(DASD_FLAG_OFFLINE, &device->flags) && + !test_bit(DASD_FLAG_SAFE_OFFLINE_RUNNING, &device->flags)) { + /* + * dasd is being set offline + * but it is no safe offline where we have to allow I/O + */ return 1; } if (device->stopped) { Patches currently in stable-queue which might be from sth(a)linux.vnet.ibm.com are queue-4.9/s390-dasd-fix-hanging-safe-offline.patch

7 years, 2 months

1
0
0 0

Patch "rtc: opal: Handle disabled TPO in opal_get_tpo_time()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: opal: Handle disabled TPO in opal_get_tpo_time() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-opal-handle-disabled-tpo-in-opal_get_tpo_time.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> Date: Fri, 19 May 2017 15:35:09 +0530 Subject: rtc: opal: Handle disabled TPO in opal_get_tpo_time() From: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> [ Upstream commit 6dc1cf6f932bb0ea4d8f5e913a0a401ecacd2f03 ] On PowerNV platform when Timed-Power-On(TPO) is disabled, read of stored TPO yields value with all date components set to '0' inside opal_get_tpo_time(). The function opal_to_tm() then converts it to an offset from year 1900 yielding alarm-time == "1900-00-01 00:00:00". This causes problems with __rtc_read_alarm() that expecting an offset from "1970-00-01 00:00:00" and returned alarm-time results in a -ve value for time64_t. Which ultimately results in this error reported in kernel logs with a seemingly garbage value: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" We fix this by explicitly handling the case of all alarm date-time components being '0' inside opal_get_tpo_time() and returning -ENOENT in such a case. This signals generic rtc that no alarm is set and it bails out from the alarm initialization flow without reporting the above error. Signed-off-by: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> Reported-by: Steve Best <sbest(a)redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-opal.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/rtc/rtc-opal.c +++ b/drivers/rtc/rtc-opal.c @@ -150,6 +150,16 @@ static int opal_get_tpo_time(struct devi y_m_d = be32_to_cpu(__y_m_d); h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32); + + /* check if no alarm is set */ + if (y_m_d == 0 && h_m_s_ms == 0) { + pr_debug("No alarm is set\n"); + rc = -ENOENT; + goto exit; + } else { + pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); + } + opal_to_tm(y_m_d, h_m_s_ms, &alarm->time); exit: Patches currently in stable-queue which might be from vaibhav(a)linux.vnet.ibm.com are queue-4.9/rtc-interface-validate-alarm-time-before-handling-rollover.patch queue-4.9/rtc-opal-handle-disabled-tpo-in-opal_get_tpo_time.patch

7 years, 2 months

1
0
0 0

Patch "rtc: interface: Validate alarm-time before handling rollover" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: interface: Validate alarm-time before handling rollover to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-interface-validate-alarm-time-before-handling-rollover.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> Date: Fri, 19 May 2017 22:18:55 +0530 Subject: rtc: interface: Validate alarm-time before handling rollover From: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> [ Upstream commit da96aea0ed177105cb13ee83b328f6c61e061d3f ] In function __rtc_read_alarm() its possible for an alarm time-stamp to be invalid even after replacing missing components with current time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this case and will cause the call to 'rtc_tm_to_time64(&alarm->time)' return a negative value for variable t_alm. While handling alarm rollover this negative t_alm (assumed to seconds offset from '1970-01-01 00:00:00') is converted back to rtc_time via rtc_time64_to_tm() which results in this error log with seemingly garbage values: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" This error was generated when the rtc driver (rtc-opal in this case) returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that the alarm is disabled. Though I have submitted a separate fix for the rtc-opal driver, this issue may potentially impact other existing/future rtc drivers. To fix this issue the patch validates the alarm time-stamp just after filling up the missing datetime components and if rtc_valid_tm() still reports it to be invalid then bails out of the function without handling the rollover. Reported-by: Steve Best <sbest(a)redhat.com> Signed-off-by: Vaibhav Jain <vaibhav(a)linux.vnet.ibm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/interface.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -227,6 +227,13 @@ int __rtc_read_alarm(struct rtc_device * missing = year; } + /* Can't proceed if alarm is still invalid after replacing + * missing fields. + */ + err = rtc_valid_tm(&alarm->time); + if (err) + goto done; + /* with luck, no rollover is needed */ t_now = rtc_tm_to_time64(&now); t_alm = rtc_tm_to_time64(&alarm->time); @@ -278,9 +285,9 @@ int __rtc_read_alarm(struct rtc_device * dev_warn(&rtc->dev, "alarm rollover not handled\n"); } -done: err = rtc_valid_tm(&alarm->time); +done: if (err) { dev_warn(&rtc->dev, "invalid alarm value: %d-%d-%d %d:%d:%d\n", alarm->time.tm_year + 1900, alarm->time.tm_mon + 1, Patches currently in stable-queue which might be from vaibhav(a)linux.vnet.ibm.com are queue-4.9/rtc-interface-validate-alarm-time-before-handling-rollover.patch queue-4.9/rtc-opal-handle-disabled-tpo-in-opal_get_tpo_time.patch

7 years, 2 months

1
0
0 0

Patch "rtc: m41t80: fix SQW dividers override when setting a date" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: m41t80: fix SQW dividers override when setting a date to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-m41t80-fix-sqw-dividers-override-when-setting-a-date.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Gary Bisson <gary.bisson(a)boundarydevices.com> Date: Tue, 25 Apr 2017 16:45:15 +0200 Subject: rtc: m41t80: fix SQW dividers override when setting a date From: Gary Bisson <gary.bisson(a)boundarydevices.com> [ Upstream commit 0f546b058b86ea2f661cc7a6e931cee5a29959ef ] This patch is only relevant for RTC with the SQ_ALT feature which means the clock output frequency divider is stored in the weekday register. Current implementation discards the previous dividers value and clear them as soon as the time is set. Signed-off-by: Gary Bisson <gary.bisson(a)boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-m41t80.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -168,6 +168,7 @@ static int m41t80_get_datetime(struct i2 /* Sets the given date and time to the real time clock. */ static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm) { + struct m41t80_data *clientdata = i2c_get_clientdata(client); unsigned char buf[8]; int err, flags; @@ -183,6 +184,17 @@ static int m41t80_set_datetime(struct i2 buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100); buf[M41T80_REG_WDAY] = tm->tm_wday; + /* If the square wave output is controlled in the weekday register */ + if (clientdata->features & M41T80_FEATURE_SQ_ALT) { + int val; + + val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY); + if (val < 0) + return val; + + buf[M41T80_REG_WDAY] |= (val & 0xf0); + } + err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC, sizeof(buf), buf); if (err < 0) { Patches currently in stable-queue which might be from gary.bisson(a)boundarydevices.com are queue-4.9/rtc-m41t80-fix-sqw-dividers-override-when-setting-a-date.patch

7 years, 2 months

1
0
0 0

Patch "rt2x00: do not pause queue unconditionally on error path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rt2x00: do not pause queue unconditionally on error path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rt2x00-do-not-pause-queue-unconditionally-on-error-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Stanislaw Gruszka <sgruszka(a)redhat.com> Date: Tue, 19 Dec 2017 12:33:56 +0100 Subject: rt2x00: do not pause queue unconditionally on error path From: Stanislaw Gruszka <sgruszka(a)redhat.com> [ Upstream commit 6dd80efd75ce7c2dbd9f117cf585ee2b33a42ee1 ] Pausing queue without checking threshold is racy with txdone path. Moreover we do not need pause queue on any error, but only if queue is full - in case when we send RTS frame ( other cases of almost full queue are already handled in rt2x00queue_write_tx_frame() ). Patch fixes of theoretically possible problem of pausing empty queue. Signed-off-by: Stanislaw Gruszka <sgruszka(a)redhat.com> Tested-by: Enrico Mioso <mrkiko.rs(a)gmail.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) --- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c @@ -142,15 +142,25 @@ void rt2x00mac_tx(struct ieee80211_hw *h if (!rt2x00dev->ops->hw->set_rts_threshold && (tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | IEEE80211_TX_RC_USE_CTS_PROTECT))) { - if (rt2x00queue_available(queue) <= 1) - goto exit_fail; + if (rt2x00queue_available(queue) <= 1) { + /* + * Recheck for full queue under lock to avoid race + * conditions with rt2x00lib_txdone(). + */ + spin_lock(&queue->tx_lock); + if (rt2x00queue_threshold(queue)) + rt2x00queue_pause_queue(queue); + spin_unlock(&queue->tx_lock); + + goto exit_free_skb; + } if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) - goto exit_fail; + goto exit_free_skb; } if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false))) - goto exit_fail; + goto exit_free_skb; /* * Pausing queue has to be serialized with rt2x00lib_txdone(). Note @@ -164,10 +174,6 @@ void rt2x00mac_tx(struct ieee80211_hw *h return; - exit_fail: - spin_lock(&queue->tx_lock); - rt2x00queue_pause_queue(queue); - spin_unlock(&queue->tx_lock); exit_free_skb: ieee80211_free_txskb(hw, skb); } Patches currently in stable-queue which might be from sgruszka(a)redhat.com are queue-4.9/rt2x00-do-not-pause-queue-unconditionally-on-error-path.patch

7 years, 2 months

1
0
0 0

Patch "rds; Reset rs->rs_bound_addr in rds_add_bound() failure path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rds; Reset rs->rs_bound_addr in rds_add_bound() failure path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rds-reset-rs-rs_bound_addr-in-rds_add_bound-failure-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Date: Fri, 22 Dec 2017 09:38:59 -0800 Subject: rds; Reset rs->rs_bound_addr in rds_add_bound() failure path From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> [ Upstream commit 7ae0c649c47f1c5d2db8cee6dd75855970af1669 ] If the rds_sock is not added to the bind_hash_table, we must reset rs_bound_addr so that rds_remove_bound will not trip on this rds_sock. rds_add_bound() does a rds_sock_put() in this failure path, so failing to reset rs_bound_addr will result in a socket refcount bug, and will trigger a WARN_ON with the stack shown below when the application subsequently tries to close the PF_RDS socket. WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \ rds_sock_destruct+0x15/0x30 [rds] : __sk_destruct+0x21/0x190 rds_remove_bound.part.13+0xb6/0x140 [rds] rds_release+0x71/0x120 [rds] sock_release+0x1a/0x70 sock_close+0xe/0x20 __fput+0xd5/0x210 task_work_run+0x82/0xa0 do_exit+0x2ce/0xb30 ? syscall_trace_enter+0x1cc/0x2b0 do_group_exit+0x39/0xa0 SyS_exit_group+0x10/0x10 do_syscall_64+0x61/0x1a0 Signed-off-by: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/rds/bind.c | 1 + 1 file changed, 1 insertion(+) --- a/net/rds/bind.c +++ b/net/rds/bind.c @@ -114,6 +114,7 @@ static int rds_add_bound(struct rds_sock rs, &addr, (int)ntohs(*port)); break; } else { + rs->rs_bound_addr = 0; rds_sock_put(rs); ret = -ENOMEM; break; Patches currently in stable-queue which might be from sowmini.varadhan(a)oracle.com are queue-4.9/rds-reset-rs-rs_bound_addr-in-rds_add_bound-failure-path.patch

7 years, 2 months

1
0
0 0

Patch "RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Raju Rangoju <rajur(a)chelsio.com> Date: Mon, 15 May 2017 06:40:39 +0000 Subject: RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers From: Raju Rangoju <rajur(a)chelsio.com> [ Upstream commit 1dad0ebeea1cd890b8892523f736916e245b0aef ] The patch 761e19a504af (RDMA/iw_cxgb4: Handle return value of c4iw_ofld_send() in abort_arp_failure()) from May 6, 2016 leads to the following static checker warning: drivers/infiniband/hw/cxgb4/cm.c:575 abort_arp_failure() warn: passing freed memory 'skb' Also fixes skb leak when l2t resolution fails Fixes: 761e19a504afa55 (RDMA/iw_cxgb4: Handle return value of c4iw_ofld_send() in abort_arp_failure()) Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Cc: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Raju Rangoju <rajur(a)chelsio.com> Reviewed-by: Steve Wise <swise(a)opengridcomputing.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/cxgb4/cm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -488,6 +488,7 @@ static int _put_ep_safe(struct c4iw_dev ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *))); release_ep_resources(ep); + kfree_skb(skb); return 0; } @@ -498,6 +499,7 @@ static int _put_pass_ep_safe(struct c4iw ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *))); c4iw_put_ep(&ep->parent_ep->com); release_ep_resources(ep); + kfree_skb(skb); return 0; } @@ -569,11 +571,13 @@ static void abort_arp_failure(void *hand PDBG("%s rdev %p\n", __func__, rdev); req->cmd = CPL_ABORT_NO_RST; + skb_get(skb); ret = c4iw_ofld_send(rdev, skb); if (ret) { __state_set(&ep->com, DEAD); queue_arp_failure_cpl(ep, skb, FAKE_CPL_PUT_EP_SAFE); - } + } else + kfree_skb(skb); } static int send_flowc(struct c4iw_ep *ep) Patches currently in stable-queue which might be from rajur(a)chelsio.com are queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch

7 years, 2 months

1
0
0 0

Patch "ray_cs: Avoid reading past end of buffer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ray_cs: Avoid reading past end of buffer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ray_cs-avoid-reading-past-end-of-buffer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 15:38:41 -0700 Subject: ray_cs: Avoid reading past end of buffer From: Kees Cook <keescook(a)chromium.org> [ Upstream commit e48d661eb13f2f83861428f001c567fdb3f317e8 ] Using memcpy() from a buffer that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. In this case, the source was made longer, since it did not match the destination structure size. Additionally removes a needless cast. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay(a)gmail.com> Signed-off-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ray_cs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -247,7 +247,10 @@ static const UCHAR b4_default_startup_pa 0x04, 0x08, /* Noise gain, limit offset */ 0x28, 0x28, /* det rssi, med busy offsets */ 7, /* det sync thresh */ - 0, 2, 2 /* test mode, min, max */ + 0, 2, 2, /* test mode, min, max */ + 0, /* rx/tx delay */ + 0, 0, 0, 0, 0, 0, /* current BSS id */ + 0 /* hop set */ }; /*===========================================================================*/ @@ -598,7 +601,7 @@ static void init_startup_params(ray_dev_ * a_beacon_period = hops a_beacon_period = KuS *//* 64ms = 010000 */ if (local->fw_ver == 0x55) { - memcpy((UCHAR *) &local->sparm.b4, b4_default_startup_parms, + memcpy(&local->sparm.b4, b4_default_startup_parms, sizeof(struct b4_startup_params)); /* Translate sane kus input values to old build 4/5 format */ /* i = hop time in uS truncated to 3 bytes */ Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.9/qlge-avoid-reading-past-end-of-buffer.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch queue-4.9/bna-avoid-reading-past-end-of-buffer.patch

7 years, 2 months

1
0
0 0

Patch "RDMA/hfi1: fix array termination by appending NULL to attr array" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/hfi1: fix array termination by appending NULL to attr array to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-hfi1-fix-array-termination-by-appending-null-to-attr-array.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Steven L. Roberts" <robers97(a)gmail.com> Date: Wed, 10 May 2017 10:54:12 -0500 Subject: RDMA/hfi1: fix array termination by appending NULL to attr array From: "Steven L. Roberts" <robers97(a)gmail.com> [ Upstream commit c4dd4b69f55abcc8dd079f8de55d9d8c2ddbefce ] This fixes a kernel panic when loading the hfi driver as a dynamic module. Signed-off-by: Steven L Roberts <robers97(a)gmail.com> Reviewed-by: Leon Romanovsky <leon(a)kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro(a)intel.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/hfi1/sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/infiniband/hw/hfi1/sysfs.c +++ b/drivers/infiniband/hw/hfi1/sysfs.c @@ -196,7 +196,8 @@ static const struct sysfs_ops port_cc_sy }; static struct attribute *port_cc_default_attributes[] = { - &cc_prescan_attr.attr + &cc_prescan_attr.attr, + NULL }; static struct kobj_type port_cc_ktype = { Patches currently in stable-queue which might be from robers97(a)gmail.com are queue-4.9/rdma-hfi1-fix-array-termination-by-appending-null-to-attr-array.patch

7 years, 2 months

1
0
0 0

Patch "qlge: Avoid reading past end of buffer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qlge: Avoid reading past end of buffer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qlge-avoid-reading-past-end-of-buffer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 15:34:34 -0700 Subject: qlge: Avoid reading past end of buffer From: Kees Cook <keescook(a)chromium.org> [ Upstream commit df5303a8aa9a0a6934f4cea7427f1edf771f21c2 ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay(a)gmail.com> Signed-off-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c @@ -765,7 +765,7 @@ int ql_core_dump(struct ql_adapter *qdev sizeof(struct mpi_coredump_global_header); mpi_coredump->mpi_global_header.imageSize = sizeof(struct ql_mpi_coredump); - memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump", + strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump", sizeof(mpi_coredump->mpi_global_header.idString)); /* Get generic NIC reg dump */ @@ -1255,7 +1255,7 @@ static void ql_gen_reg_dump(struct ql_ad sizeof(struct mpi_coredump_global_header); mpi_coredump->mpi_global_header.imageSize = sizeof(struct ql_reg_dump); - memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump", + strncpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump", sizeof(mpi_coredump->mpi_global_header.idString)); Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.9/qlge-avoid-reading-past-end-of-buffer.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch queue-4.9/bna-avoid-reading-past-end-of-buffer.patch

7 years, 2 months

1
0
0 0

Patch "qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qlcnic-fix-a-sleep-in-atomic-bug-in-qlcnic_82xx_hw_write_wx_2m-and-qlcnic_82xx_hw_read_wx_2m.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Thu, 1 Jun 2017 16:18:10 +0800 Subject: qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 5ea6d691aac6c93b790f0905e3460d44cc4c449b ] The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -341,7 +341,7 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapt } return -EIO; } - usleep_range(1000, 1500); + udelay(1200); } if (id_reg) Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.9/misdn-fix-a-sleep-in-atomic-bug.patch queue-4.9/qlcnic-fix-a-sleep-in-atomic-bug-in-qlcnic_82xx_hw_write_wx_2m-and-qlcnic_82xx_hw_read_wx_2m.patch

7 years, 2 months

1
0
0 0

Patch "qed: Fix overriding of supported autoneg value." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qed: Fix overriding of supported autoneg value. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qed-fix-overriding-of-supported-autoneg-value.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "sudarsana.kalluru(a)cavium.com" <sudarsana.kalluru(a)cavium.com> Date: Thu, 4 May 2017 08:15:04 -0700 Subject: qed: Fix overriding of supported autoneg value. From: "sudarsana.kalluru(a)cavium.com" <sudarsana.kalluru(a)cavium.com> [ Upstream commit 34f9199ce7b7e5c641b96e928bd60e086bf7f278 ] Driver currently uses advertised-autoneg value to populate the supported-autoneg field. When advertised field is updated, user gets the same value for supported field. Supported-autoneg value need to be populated from the link capabilities value returned by the MFW. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru(a)cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 3 +++ drivers/net/ethernet/qlogic/qed/qed_main.c | 6 +++++- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 1 + 3 files changed, 9 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1628,6 +1628,9 @@ static int qed_hw_get_nvm_info(struct qe DP_NOTICE(p_hwfn, "Unknown Speed in 0x%08x\n", link_temp); } + p_hwfn->mcp_info->link_capabilities.default_speed_autoneg = + link->speed.autoneg; + link_temp &= NVM_CFG1_PORT_DRV_FLOW_CONTROL_MASK; link_temp >>= NVM_CFG1_PORT_DRV_FLOW_CONTROL_OFFSET; link->pause.autoneg = !!(link_temp & --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -1240,7 +1240,7 @@ static void qed_fill_link(struct qed_hwf /* TODO - at the moment assume supported and advertised speed equal */ if_link->supported_caps = QED_LM_FIBRE_BIT; - if (params.speed.autoneg) + if (link_caps.default_speed_autoneg) if_link->supported_caps |= QED_LM_Autoneg_BIT; if (params.pause.autoneg || (params.pause.forced_rx && params.pause.forced_tx)) @@ -1250,6 +1250,10 @@ static void qed_fill_link(struct qed_hwf if_link->supported_caps |= QED_LM_Pause_BIT; if_link->advertised_caps = if_link->supported_caps; + if (params.speed.autoneg) + if_link->advertised_caps |= QED_LM_Autoneg_BIT; + else + if_link->advertised_caps &= ~QED_LM_Autoneg_BIT; if (params.speed.advertised_speeds & NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_1G) if_link->advertised_caps |= QED_LM_1000baseT_Half_BIT | --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -35,6 +35,7 @@ struct qed_mcp_link_params { struct qed_mcp_link_capabilities { u32 speed_capabilities; + bool default_speed_autoneg; }; struct qed_mcp_link_state { Patches currently in stable-queue which might be from sudarsana.kalluru(a)cavium.com are queue-4.9/qed-fix-overriding-of-supported-autoneg-value.patch

7 years, 2 months

1
0
0 0

Patch "qed: Correct doorbell configuration for !4Kb pages" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled qed: Correct doorbell configuration for !4Kb pages to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: qed-correct-doorbell-configuration-for-4kb-pages.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Ram Amrani <Ram.Amrani(a)cavium.com> Date: Tue, 9 May 2017 15:07:50 +0300 Subject: qed: Correct doorbell configuration for !4Kb pages From: Ram Amrani <Ram.Amrani(a)cavium.com> [ Upstream commit a82dadbce47395747824971db08a128130786fdc ] When configuring the doorbell DPI address, driver aligns the start address to 4KB [HW-pages] instead of host PAGE_SIZE. As a result, RoCE applications might receive addresses which are unaligned to pages [when PAGE_SIZE > 4KB], which is a security risk. Fixes: 51ff17251c9c ("qed: Add support for RoCE hw init") Signed-off-by: Ram Amrani <Ram.Amrani(a)cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -850,7 +850,7 @@ qed_hw_init_pf_doorbell_bar(struct qed_h NULL) + qed_cxt_get_proto_cid_count(p_hwfn, PROTOCOLID_ETH, NULL); - norm_regsize = roundup(QED_PF_DEMS_SIZE * non_pwm_conn, 4096); + norm_regsize = roundup(QED_PF_DEMS_SIZE * non_pwm_conn, PAGE_SIZE); min_addr_reg1 = norm_regsize / 4096; pwm_regsize = db_bar_size - norm_regsize; Patches currently in stable-queue which might be from Ram.Amrani(a)cavium.com are queue-4.9/qed-correct-doorbell-configuration-for-4kb-pages.patch

7 years, 2 months

1
0
0 0

Patch "[media] pxa_camera: fix module remove codepath for v4l2 clock" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] pxa_camera: fix module remove codepath for v4l2 clock to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pxa_camera-fix-module-remove-codepath-for-v4l2-clock.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Petr Cvek <petr.cvek(a)tul.cz> Date: Mon, 24 Apr 2017 22:51:58 -0300 Subject: [media] pxa_camera: fix module remove codepath for v4l2 clock From: Petr Cvek <petr.cvek(a)tul.cz> [ Upstream commit e3b4d10cc057522353c4a02f2f90dca6a52e006f ] The conversion from soc_camera omitted a correct handling of the clock gating for a sensor. When the pxa_camera driver module was removed it tried to unregister clk, but this caused a similar warning: WARNING: CPU: 0 PID: 6740 at drivers/media/v4l2-core/v4l2-clk.c:278 v4l2_clk_unregister(): Refusing to unregister ref-counted 0-0030 clock! The clock was at time still refcounted by the sensor driver. Before the removing of the pxa_camera the clock must be dropped by the sensor driver. This should be triggered by v4l2_async_notifier_unregister() call which removes sensor driver module too, calls unbind() function and then tries to probe sensor driver again. Inside unbind() we can safely unregister the v4l2 clock as the sensor driver got removed. The original v4l2_clk_unregister() should be put inside test as the clock can be already unregistered from unbind(). If there was not any bound sensor the clock is still present. The codepath is practically a copy from the old soc_camera. The bug was tested with a pxa_camera+ov9640 combination during the conversion of the ov9640 from the soc_camera. Signed-off-by: Petr Cvek <petr.cvek(a)tul.cz> Tested-by: Robert Jarzmik <robert.jarzmik(a)free.fr> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/platform/pxa_camera.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -2169,6 +2169,12 @@ static void pxa_camera_sensor_unbind(str pxa_dma_stop_channels(pcdev); pxa_camera_destroy_formats(pcdev); + + if (pcdev->mclk_clk) { + v4l2_clk_unregister(pcdev->mclk_clk); + pcdev->mclk_clk = NULL; + } + video_unregister_device(&pcdev->vdev); pcdev->sensor = NULL; @@ -2495,7 +2501,13 @@ static int pxa_camera_remove(struct plat dma_release_channel(pcdev->dma_chans[1]); dma_release_channel(pcdev->dma_chans[2]); - v4l2_clk_unregister(pcdev->mclk_clk); + v4l2_async_notifier_unregister(&pcdev->notifier); + + if (pcdev->mclk_clk) { + v4l2_clk_unregister(pcdev->mclk_clk); + pcdev->mclk_clk = NULL; + } + v4l2_device_unregister(&pcdev->v4l2_dev); dev_info(&pdev->dev, "PXA Camera driver unloaded\n"); Patches currently in stable-queue which might be from petr.cvek(a)tul.cz are queue-4.9/pxa_camera-fix-module-remove-codepath-for-v4l2-clock.patch

7 years, 2 months

1
0
0 0

Patch "powerpc/spufs: Fix coredump of SPU contexts" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/spufs: Fix coredump of SPU contexts to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-spufs-fix-coredump-of-spu-contexts.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Mon, 29 May 2017 20:26:07 +1000 Subject: powerpc/spufs: Fix coredump of SPU contexts From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit 99acc9bede06bbb2662aafff51f5b9e529fa845e ] If a process dumps core while it has SPU contexts active then we have code to also dump information about the SPU contexts. Unfortunately it's been broken for 3 1/2 years, and we didn't notice. In commit 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers") the nread variable was removed and rc used instead. That means when the loop exits successfully, rc has the number of bytes read, but it's then used as the return value for the function, which should return 0 on success. So fix it by setting rc = 0 before returning in the success case. Fixes: 7b1f4020d0d1 ("spufs: get rid of dump_emit() wrappers") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Acked-by: Jeremy Kerr <jk(a)ozlabs.org> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/platforms/cell/spufs/coredump.c | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -175,6 +175,8 @@ static int spufs_arch_write_note(struct skip = roundup(cprm->pos - total + sz, 4) - cprm->pos; if (!dump_skip(cprm, skip)) goto Eio; + + rc = 0; out: free_page((unsigned long)buf); return rc; Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 2 months

1
0
0 0

Patch "powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Thu, 18 May 2017 20:37:31 +1000 Subject: powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit e41e53cd4fe331d0d1f06f8e4ed7e2cc63ee2c34 ] virt_addr_valid() is supposed to tell you if it's OK to call virt_to_page() on an address. What this means in practice is that it should only return true for addresses in the linear mapping which are backed by a valid PFN. We are failing to properly check that the address is in the linear mapping, because virt_to_pfn() will return a valid looking PFN for more or less any address. That bug is actually caused by __pa(), used in virt_to_pfn(). eg: __pa(0xc000000000010000) = 0x10000 # Good __pa(0xd000000000010000) = 0x10000 # Bad! __pa(0x0000000000010000) = 0x10000 # Bad! This started happening after commit bdbc29c19b26 ("powerpc: Work around gcc miscompilation of __pa() on 64-bit") (Aug 2013), where we changed the definition of __pa() to work around a GCC bug. Prior to that we subtracted PAGE_OFFSET from the value passed to __pa(), meaning __pa() of a 0xd or 0x0 address would give you something bogus back. Until we can verify if that GCC bug is no longer an issue, or come up with another solution, this commit does the minimal fix to make virt_addr_valid() work, by explicitly checking that the address is in the linear mapping region. Fixes: bdbc29c19b26 ("powerpc: Work around gcc miscompilation of __pa() on 64-bit") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Reviewed-by: Paul Mackerras <paulus(a)ozlabs.org> Reviewed-by: Balbir Singh <bsingharora(a)gmail.com> Tested-by: Breno Leitao <breno.leitao(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/asm/page.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -132,7 +132,19 @@ extern long long virt_phys_offset; #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) #define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +#ifdef CONFIG_PPC_BOOK3S_64 +/* + * On hash the vmalloc and other regions alias to the kernel region when passed + * through __pa(), which virt_to_pfn() uses. That means virt_addr_valid() can + * return true for some vmalloc addresses, which is incorrect. So explicitly + * check that the address is in the kernel region. + */ +#define virt_addr_valid(kaddr) (REGION_ID(kaddr) == KERNEL_REGION_ID && \ + pfn_valid(virt_to_pfn(kaddr))) +#else #define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) +#endif /* * On Book-E parts we need __va to parse the device tree and we can't Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 2 months

1
0
0 0

Patch "powerpc/modules: If mprofile-kernel is enabled add it to vermagic" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/modules: If mprofile-kernel is enabled add it to vermagic to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Wed, 10 May 2017 16:57:49 +1000 Subject: powerpc/modules: If mprofile-kernel is enabled add it to vermagic From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit 43e24e82f35291d4c1ca78877ce1b20d3aeb78f1 ] On powerpc we can build the kernel with two different ABIs for mcount(), which is used by ftrace. Kernels built with one ABI do not know how to load modules built with the other ABI. The new style ABI is called "mprofile-kernel", for want of a better name. Currently if we build a module using the old style ABI, and the kernel with mprofile-kernel, when we load the module we'll oops something like: # insmod autofs4-no-mprofile-kernel.ko ftrace-powerpc: Unexpected instruction f8810028 around bl _mcount ------------[ cut here ]------------ WARNING: CPU: 6 PID: 3759 at ../kernel/trace/ftrace.c:2024 ftrace_bug+0x2b8/0x3c0 CPU: 6 PID: 3759 Comm: insmod Not tainted 4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269 #11 ... NIP [c0000000001eaa48] ftrace_bug+0x2b8/0x3c0 LR [c0000000001eaff8] ftrace_process_locs+0x4a8/0x590 Call Trace: alloc_pages_current+0xc4/0x1d0 (unreliable) ftrace_process_locs+0x4a8/0x590 load_module+0x1c8c/0x28f0 SyS_finit_module+0x110/0x140 system_call+0x38/0xfc ... ftrace failed to modify [<d000000002a31024>] 0xd000000002a31024 actual: 35:65:00:48 We can avoid this by including in the vermagic whether the kernel/module was built with mprofile-kernel. Which results in: # insmod autofs4-pg.ko autofs4: version magic '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269 SMP mod_unload modversions ' should be '4.11.0-rc3-gcc-5.4.1-00017-g5a61ef74f269-dirty SMP mod_unload modversions mprofile-kernel' insmod: ERROR: could not insert module autofs4-pg.ko: Invalid module format Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Acked-by: Balbir Singh <bsingharora(a)gmail.com> Acked-by: Jessica Yu <jeyu(a)redhat.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/asm/module.h | 4 ++++ 1 file changed, 4 insertions(+) --- a/arch/powerpc/include/asm/module.h +++ b/arch/powerpc/include/asm/module.h @@ -14,6 +14,10 @@ #include <asm-generic/module.h> +#ifdef CC_USING_MPROFILE_KERNEL +#define MODULE_ARCH_VERMAGIC "mprofile-kernel" +#endif + #ifndef __powerpc64__ /* * Thanks to Paul M for explaining this. Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 2 months

1
0
0 0

Patch "powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE]" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-don-t-clobber-tcr-when-setting-tcr.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Ivan Mikhaylov <ivan(a)de.ibm.com> Date: Fri, 19 May 2017 18:47:05 +0300 Subject: powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] From: Ivan Mikhaylov <ivan(a)de.ibm.com> [ Upstream commit 6e2f03e292ef46eed2b31b0a344a91d514f9cd81 ] Prevent a kernel panic caused by unintentionally clearing TCR watchdog bits. At this point in the kernel boot, the watchdog may have already been enabled by u-boot. The original code's attempt to write to the TCR register results in an inadvertent clearing of the watchdog configuration bits, causing the 476 to reset. Signed-off-by: Ivan Mikhaylov <ivan(a)de.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kernel/time.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -719,12 +719,20 @@ static int __init get_freq(char *name, i static void start_cpu_decrementer(void) { #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) + unsigned int tcr; + /* Clear any pending timer interrupts */ mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */ + tcr = mfspr(SPRN_TCR); + /* + * The watchdog may have already been enabled by u-boot. So leave + * TRC[WP] (Watchdog Period) alone. + */ + tcr &= TCR_WP_MASK; /* Clear all bits except for TCR[WP] */ + tcr |= TCR_DIE; /* Enable decrementer */ + mtspr(SPRN_TCR, tcr); +#endif } void __init generic_calibrate_decr(void) Patches currently in stable-queue which might be from ivan(a)de.ibm.com are queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch

7 years, 2 months

1
0
0 0

Patch "powerpc/8xx: fix mpc8xx_get_irq() return on no irq" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/8xx: fix mpc8xx_get_irq() return on no irq to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Christophe Leroy <christophe.leroy(a)c-s.fr> Date: Fri, 10 Mar 2017 11:37:01 +0100 Subject: powerpc/8xx: fix mpc8xx_get_irq() return on no irq From: Christophe Leroy <christophe.leroy(a)c-s.fr> [ Upstream commit 3c29b6038828c1f4c9ecbfec14d4fc5e25f1c947 ] IRQ 0 is a valid HW interrupt. So get_irq() shall return 0 when there is no irq, instead of returning irq_linear_revmap(... ,0) Fixes: f2a0bd3753dad ("[POWERPC] 8xx: powerpc port of core CPM PIC") Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/sysdev/mpc8xx_pic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -79,7 +79,7 @@ unsigned int mpc8xx_get_irq(void) irq = in_be32(&siu_reg->sc_sivec) >> 26; if (irq == PIC_VEC_SPURRIOUS) - irq = 0; + return 0; return irq_linear_revmap(mpc8xx_pic_host, irq); Patches currently in stable-queue which might be from christophe.leroy(a)c-s.fr are queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 2 months

1
0
0 0

Patch "PowerCap: Fix an error code in powercap_register_zone()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PowerCap: Fix an error code in powercap_register_zone() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powercap-fix-an-error-code-in-powercap_register_zone.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Wed, 10 May 2017 22:40:06 +0300 Subject: PowerCap: Fix an error code in powercap_register_zone() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 216c4e9db4c9d1d2a382b42880442dc632cd47d9 ] In the current code we accidentally return the successful result from idr_alloc() instead of a negative error pointer. The caller is looking for an error pointer and so it treats the returned value as a valid pointer. This one might be a bit serious because if it lets people get around the kernel's protection for remapping NULL. I'm not sure. Fixes: 75d2364ea0ca (PowerCap: Add class driver) Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/powercap/powercap_sys.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/powercap/powercap_sys.c +++ b/drivers/powercap/powercap_sys.c @@ -538,6 +538,7 @@ struct powercap_zone *powercap_register_ power_zone->id = result; idr_init(&power_zone->idr); + result = -ENOMEM; power_zone->name = kstrdup(name, GFP_KERNEL); if (!power_zone->name) goto err_name_alloc; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/block-fix-an-error-code-in-add_partition.patch queue-4.9/x.509-fix-error-code-in-x509_cert_parse.patch queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch queue-4.9/drm-amdkfd-null-dereference-involving-create_process.patch queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.9/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.9/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Sat, 20 May 2017 00:31:12 +0300 Subject: pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 662f9a105b4322b8559d448f86110e6ec24b8738 ] If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime, but obviously we intended to set an error code here. Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/flexfilelayout/flexfilelayout.c | 1 + 1 file changed, 1 insertion(+) --- a/fs/nfs/flexfilelayout/flexfilelayout.c +++ b/fs/nfs/flexfilelayout/flexfilelayout.c @@ -475,6 +475,7 @@ ff_layout_alloc_lseg(struct pnfs_layout_ goto out_err_free; /* fh */ + rc = -EIO; p = xdr_inline_decode(&stream, 4); if (!p) goto out_err_free; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/block-fix-an-error-code-in-add_partition.patch queue-4.9/x.509-fix-error-code-in-x509_cert_parse.patch queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch queue-4.9/drm-amdkfd-null-dereference-involving-create_process.patch queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.9/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.9/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "PM / devfreq: Fix potential NULL pointer dereference in governor_store" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PM / devfreq: Fix potential NULL pointer dereference in governor_store to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pm-devfreq-fix-potential-null-pointer-dereference-in-governor_store.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Wed, 6 Dec 2017 14:20:15 -0600 Subject: PM / devfreq: Fix potential NULL pointer dereference in governor_store From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit 63f1e05f7fe9ca509c60154d6a833abf96eecdc9 ] df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79c4e4 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Reviewed-by: Chanwoo Choi <cw00.choi(a)samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/devfreq/devfreq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -943,7 +943,8 @@ static ssize_t governor_store(struct dev if (df->governor == governor) { ret = 0; goto out; - } else if (df->governor->immutable || governor->immutable) { + } else if ((df->governor && df->governor->immutable) || + governor->immutable) { ret = -EINVAL; goto out; } Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.9/pm-devfreq-fix-potential-null-pointer-dereference-in-governor_store.patch queue-4.9/net-freescale-fix-potential-null-pointer-dereference.patch

7 years, 2 months

1
0
0 0

Patch "pinctrl: meson-gxbb: remove non-existing pin GPIOX_22" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pinctrl-meson-gxbb-remove-non-existing-pin-gpiox_22.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Heiner Kallweit <hkallweit1(a)gmail.com> Date: Wed, 7 Jun 2017 07:44:20 +0200 Subject: pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 From: Heiner Kallweit <hkallweit1(a)gmail.com> [ Upstream commit 4c8127cb523982e0a474ad80b14b665dc2f37b3b ] After commit 34e61801a3b9 "pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry" I started to get the following warning: "meson-pinctrl c8834000.periphs:pinctrl@4b0: names 119 do not match number of GPIOs 120" It turned out that not the mentioned commit has a problem, it just revealed another problem which had existed before. There is no PIN GPIOX_22 on Meson GXBB. Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Heiner Kallweit <hkallweit1(a)gmail.com> Reviewed-by: Neil Armstrong <narmstrong(a)baylibre.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 1 - 1 file changed, 1 deletion(-) --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -138,7 +138,6 @@ static const struct pinctrl_pin_desc mes MESON_PIN(GPIOX_19, EE_OFF), MESON_PIN(GPIOX_20, EE_OFF), MESON_PIN(GPIOX_21, EE_OFF), - MESON_PIN(GPIOX_22, EE_OFF), MESON_PIN(GPIOCLK_0, EE_OFF), MESON_PIN(GPIOCLK_1, EE_OFF), Patches currently in stable-queue which might be from hkallweit1(a)gmail.com are queue-4.9/pinctrl-meson-gxbb-remove-non-existing-pin-gpiox_22.patch

7 years, 2 months

1
0
0 0

Patch "pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pinctrl-baytrail-enable-glitch-filter-for-gpios-used-as-interrupts.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Hans de Goede <hdegoede(a)redhat.com> Date: Mon, 1 Jan 2018 13:23:57 +0100 Subject: pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 9291c65b01d1c67ebd56644cb19317ad665c44b3 ] On some systems, some PCB traces attached to GpioInts are routed in such a way that they pick up enough interference to constantly (many times per second) trigger. Enabling glitch-filtering fixes this. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pinctrl/intel/pinctrl-baytrail.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -46,6 +46,9 @@ #define BYT_TRIG_POS BIT(25) #define BYT_TRIG_LVL BIT(24) #define BYT_DEBOUNCE_EN BIT(20) +#define BYT_GLITCH_FILTER_EN BIT(19) +#define BYT_GLITCH_F_SLOW_CLK BIT(17) +#define BYT_GLITCH_F_FAST_CLK BIT(16) #define BYT_PULL_STR_SHIFT 9 #define BYT_PULL_STR_MASK (3 << BYT_PULL_STR_SHIFT) #define BYT_PULL_STR_2K (0 << BYT_PULL_STR_SHIFT) @@ -1579,6 +1582,9 @@ static int byt_irq_type(struct irq_data */ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); + /* Enable glitch filtering */ + value |= BYT_GLITCH_FILTER_EN | BYT_GLITCH_F_SLOW_CLK | + BYT_GLITCH_F_FAST_CLK; writel(value, reg); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.9/gpio-crystalcove-do-not-write-regular-gpio-registers-for-virtual-gpios.patch queue-4.9/acpi-video-default-lcd_only-to-true-on-win8-ready-and-newer-machines.patch queue-4.9/hid-i2c-call-acpi_device_fix_up_power-for-acpi-enumerated-devices.patch queue-4.9/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch queue-4.9/input-goodix-disable-irqs-while-suspended.patch queue-4.9/asoc-intel-cht_bsw_rt5645-analog-mic-support.patch queue-4.9/pinctrl-baytrail-enable-glitch-filter-for-gpios-used-as-interrupts.patch

7 years, 2 months

1
0
0 0

Patch "pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Kirill Tkhai <ktkhai(a)virtuozzo.com> Date: Mon, 8 May 2017 15:56:34 -0700 Subject: pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() From: Kirill Tkhai <ktkhai(a)virtuozzo.com> [ Upstream commit 8896c23d2ef803f1883fea73117a435925c2b4c4 ] alloc_pidmap() advances pid_namespace::last_pid. When first pid allocation fails, then next created process will have pid 2 and pid_ns_prepare_proc() won't be called. So, pid_namespace::proc_mnt will never be initialized (not to mention that there won't be a child reaper). I saw crash stack of such case on kernel 3.10: BUG: unable to handle kernel NULL pointer dereference at (null) IP: proc_flush_task+0x8f/0x1b0 Call Trace: release_task+0x3f/0x490 wait_consider_task.part.10+0x7ff/0xb00 do_wait+0x11f/0x280 SyS_wait4+0x7d/0x110 We may fix this by restore of last_pid in 0 or by prohibiting of futher allocations. Since there was a similar issue in Oleg Nesterov's commit 314a8ad0f18a ("pidns: fix free_pid() to handle the first fork failure"). and it was fixed via prohibiting allocation, let's follow this way, and do the same. Link: http://lkml.kernel.org/r/149201021004.4863.6762095011554287922.stgit@localh… Signed-off-by: Kirill Tkhai <ktkhai(a)virtuozzo.com> Acked-by: Cyrill Gorcunov <gorcunov(a)openvz.org> Cc: Andrei Vagin <avagin(a)virtuozzo.com> Cc: Andreas Gruenbacher <agruenba(a)redhat.com> Cc: Kees Cook <keescook(a)chromium.org> Cc: Michael Kerrisk <mtk.manpages(a)googlemail.com> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: Paul Moore <paul(a)paul-moore.com> Cc: Eric Biederman <ebiederm(a)xmission.com> Cc: Andy Lutomirski <luto(a)amacapital.net> Cc: Ingo Molnar <mingo(a)kernel.org> Cc: Serge Hallyn <serge(a)hallyn.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/pid.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/kernel/pid.c +++ b/kernel/pid.c @@ -322,8 +322,10 @@ struct pid *alloc_pid(struct pid_namespa } if (unlikely(is_child_reaper(pid))) { - if (pid_ns_prepare_proc(ns)) + if (pid_ns_prepare_proc(ns)) { + disable_pid_allocation(ns); goto out_free; + } } get_pid_ns(ns); Patches currently in stable-queue which might be from ktkhai(a)virtuozzo.com are queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch

7 years, 2 months

1
0
0 0

Patch "perf trace: Add mmap alias for s390" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf trace: Add mmap alias for s390 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-trace-add-mmap-alias-for-s390.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jiri Olsa <jolsa(a)kernel.org> Date: Wed, 31 May 2017 13:35:57 +0200 Subject: perf trace: Add mmap alias for s390 From: Jiri Olsa <jolsa(a)kernel.org> [ Upstream commit 54265664c15a68905d8d67d19205e9a767636434 ] The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this reason perf trace can't find the proper syscall event to get args format from and displays it wrongly as 'continued'. To fix that fill the "alias" field with "old_mmap" for trace's mmap record to get the correct translation. Before: 0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0 0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000 0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6 After: 0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0 0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000 0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6 Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Cc: David Ahern <dsahern(a)gmail.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <a.p.zijlstra(a)chello.nl> Link: http://lkml.kernel.org/r/20170531113557.19175-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/builtin-trace.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -679,6 +679,10 @@ static struct syscall_fmt { { .name = "mlockall", .errmsg = true, .arg_scnprintf = { [0] = SCA_HEX, /* addr */ }, }, { .name = "mmap", .hexret = true, +/* The standard mmap maps to old_mmap on s390x */ +#if defined(__s390x__) + .alias = "old_mmap", +#endif .arg_scnprintf = { [0] = SCA_HEX, /* addr */ [2] = SCA_MMAP_PROT, /* prot */ [3] = SCA_MMAP_FLAGS, /* flags */ }, }, Patches currently in stable-queue which might be from jolsa(a)kernel.org are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-trace-add-mmap-alias-for-s390.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/perf-core-correct-event-creation-with-perf_format_group.patch queue-4.9/perf-tools-decompress-kernel-module-when-reading-dso-data.patch queue-4.9/perf-tests-decompress-kernel-module-before-objdump.patch queue-4.9/perf-header-set-proper-module-name-when-build-id-event-found.patch

7 years, 2 months

1
0
0 0

Patch "perf tools: Decompress kernel module when reading DSO data" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf tools: Decompress kernel module when reading DSO data to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-tools-decompress-kernel-module-when-reading-dso-data.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Namhyung Kim <namhyung(a)kernel.org> Date: Thu, 8 Jun 2017 16:31:05 +0900 Subject: perf tools: Decompress kernel module when reading DSO data From: Namhyung Kim <namhyung(a)kernel.org> [ Upstream commit 1d6b3c9ba756a5134fd7ad1959acac776d17404b ] Currently perf decompresses kernel modules when loading the symbol table but it missed to do it when reading raw data. Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> Acked-by: Jiri Olsa <jolsa(a)kernel.org> Cc: Adrian Hunter <adrian.hunter(a)intel.com> Cc: David Ahern <dsahern(a)gmail.com> Cc: Peter Zijlstra <a.p.zijlstra(a)chello.nl> Cc: Wang Nan <wangnan0(a)huawei.com> Cc: kernel-team(a)lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/dso.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/tools/perf/util/dso.c +++ b/tools/perf/util/dso.c @@ -366,7 +366,23 @@ static int __open_dso(struct dso *dso, s if (!is_regular_file(name)) return -EINVAL; + if (dso__needs_decompress(dso)) { + char newpath[KMOD_DECOMP_LEN]; + size_t len = sizeof(newpath); + + if (dso__decompress_kmodule_path(dso, name, newpath, len) < 0) { + free(name); + return -dso->load_errno; + } + + strcpy(name, newpath); + } + fd = do_open(name); + + if (dso__needs_decompress(dso)) + unlink(name); + free(name); return fd; } Patches currently in stable-queue which might be from namhyung(a)kernel.org are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-trace-add-mmap-alias-for-s390.patch queue-4.9/perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/perf-tools-decompress-kernel-module-when-reading-dso-data.patch queue-4.9/perf-tests-decompress-kernel-module-before-objdump.patch queue-4.9/perf-header-set-proper-module-name-when-build-id-event-found.patch

7 years, 2 months

1
0
0 0

Patch "perf tools: Fix copyfile_offset update of output offset" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf tools: Fix copyfile_offset update of output offset to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-tools-fix-copyfile_offset-update-of-output-offset.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jiri Olsa <jolsa(a)kernel.org> Date: Tue, 9 Jan 2018 14:39:23 +0100 Subject: perf tools: Fix copyfile_offset update of output offset From: Jiri Olsa <jolsa(a)kernel.org> [ Upstream commit fa1195ccc0af2d121abe0fe266a1caee8c265eea ] We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Andi Kleen <ak(a)linux.intel.com> Cc: David Ahern <dsahern(a)gmail.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Fixes: 9c9f5a2f1944 ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/perf/util/util.c +++ b/tools/perf/util/util.c @@ -207,7 +207,7 @@ int copyfile_offset(int ifd, loff_t off_ size -= ret; off_in += ret; - off_out -= ret; + off_out += ret; } munmap(ptr, off_in + size); Patches currently in stable-queue which might be from jolsa(a)kernel.org are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-trace-add-mmap-alias-for-s390.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/perf-core-correct-event-creation-with-perf_format_group.patch queue-4.9/perf-tools-decompress-kernel-module-when-reading-dso-data.patch queue-4.9/perf-tests-decompress-kernel-module-before-objdump.patch queue-4.9/perf-header-set-proper-module-name-when-build-id-event-found.patch

7 years, 2 months

1
0
0 0

Patch "perf report: Fix off-by-one for non-activation frames" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf report: Fix off-by-one for non-activation frames to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-report-fix-off-by-one-for-non-activation-frames.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Milian Wolff <milian.wolff(a)kdab.com> Date: Wed, 24 May 2017 15:21:25 +0900 Subject: perf report: Fix off-by-one for non-activation frames From: Milian Wolff <milian.wolff(a)kdab.com> [ Upstream commit 1982ad48fc82c284a5cc55697a012d3357e84d01 ] As the documentation for dwfl_frame_pc says, frames that are no activation frames need to have their program counter decremented by one to properly find the function of the caller. This fixes many cases where perf report currently attributes the cost to the next line. I.e. I have code like this: ~~~~~~~~~~~~~~~ #include <thread> #include <chrono> using namespace std; int main() { this_thread::sleep_for(chrono::milliseconds(1000)); this_thread::sleep_for(chrono::milliseconds(100)); this_thread::sleep_for(chrono::milliseconds(10)); return 0; } ~~~~~~~~~~~~~~~ Now compile and record it: ~~~~~~~~~~~~~~~ g++ -std=c++11 -g -O2 test.cpp echo 1 | sudo tee /proc/sys/kernel/sched_schedstats perf record \ --event sched:sched_stat_sleep \ --event sched:sched_process_exit \ --event sched:sched_switch --call-graph=dwarf \ --output perf.data.raw \ ./a.out echo 0 | sudo tee /proc/sys/kernel/sched_schedstats perf inject --sched-stat --input perf.data.raw --output perf.data ~~~~~~~~~~~~~~~ Before this patch, the report clearly shows the off-by-one issue. Most notably, the last sleep invocation is incorrectly attributed to the "return 0;" line: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:9 | __libc_start_main | _start | |--9.01%--main test.cpp:10 | __libc_start_main | _start | --0.91%--main test.cpp:13 __libc_start_main _start ~~~~~~~~~~~~~~~ With this patch here applied, the issue is fixed. The report becomes much more usable: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:8 | __libc_start_main | _start | |--9.01%--main test.cpp:9 | __libc_start_main | _start | --0.91%--main test.cpp:10 __libc_start_main _start ~~~~~~~~~~~~~~~ Similarly it works for signal frames: ~~~~~~~~~~~~~~~ __noinline void bar(void) { volatile long cnt = 0; for (cnt = 0; cnt < 100000000; cnt++); } __noinline void foo(void) { bar(); } void sig_handler(int sig) { foo(); } int main(void) { signal(SIGUSR1, sig_handler); raise(SIGUSR1); foo(); return 0; } ~~~~~~~~~~~~~~~~ Before, the report wrongly points to `signal.c:29` after raise(): ~~~~~~~~~~~~~~~~ $ perf report --stdio --no-children -g srcline -s srcline ... 100.00% signal.c:11 | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:29 __libc_start_main _start ~~~~~~~~~~~~~~~~ With this patch in, the issue is fixed and we instead get: ~~~~~~~~~~~~~~~~ 100.00% signal signal [.] bar | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:27 __libc_start_main _start ~~~~~~~~~~~~~~~~ Note how this patch fixes this issue for both unwinding methods, i.e. both dwfl and libunwind. The former case is straight-forward thanks to dwfl_frame_pc(). For libunwind, we replace the functionality via unw_is_signal_frame() for any but the very first frame. Signed-off-by: Milian Wolff <milian.wolff(a)kdab.com> Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> Cc: Arnaldo Carvalho de Melo <acme(a)kernel.org> Cc: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: David Ahern <dsahern(a)gmail.com> Cc: Jiri Olsa <jolsa(a)kernel.org> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra(a)chello.nl> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Yao Jin <yao.jin(a)linux.intel.com> Cc: kernel-team(a)lge.com Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/unwind-libdw.c | 6 +++++- tools/perf/util/unwind-libunwind-local.c | 11 +++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -167,12 +167,16 @@ frame_callback(Dwfl_Frame *state, void * { struct unwind_info *ui = arg; Dwarf_Addr pc; + bool isactivation; - if (!dwfl_frame_pc(state, &pc, NULL)) { + if (!dwfl_frame_pc(state, &pc, &isactivation)) { pr_err("%s", dwfl_errmsg(-1)); return DWARF_CB_ABORT; } + if (!isactivation) + --pc; + return entry(pc, ui) || !(--ui->max_stack) ? DWARF_CB_ABORT : DWARF_CB_OK; } --- a/tools/perf/util/unwind-libunwind-local.c +++ b/tools/perf/util/unwind-libunwind-local.c @@ -646,6 +646,17 @@ static int get_entries(struct unwind_inf while (!ret && (unw_step(&c) > 0) && i < max_stack) { unw_get_reg(&c, UNW_REG_IP, &ips[i]); + + /* + * Decrement the IP for any non-activation frames. + * this is required to properly find the srcline + * for caller frames. + * See also the documentation for dwfl_frame_pc(), + * which this code tries to replicate. + */ + if (unw_is_signal_frame(&c) <= 0) + --ips[i]; + ++i; } Patches currently in stable-queue which might be from milian.wolff(a)kdab.com are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch

7 years, 2 months

1
0
0 0

Patch "perf tests: Decompress kernel module before objdump" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf tests: Decompress kernel module before objdump to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-tests-decompress-kernel-module-before-objdump.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Namhyung Kim <namhyung(a)kernel.org> Date: Thu, 8 Jun 2017 16:31:07 +0900 Subject: perf tests: Decompress kernel module before objdump From: Namhyung Kim <namhyung(a)kernel.org> [ Upstream commit 94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 ] If a kernel modules is compressed, it should be decompressed before running objdump to parse binary data correctly. This fixes a failure of object code reading test for me. Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Acked-by: Jiri Olsa <jolsa(a)kernel.org> Cc: David Ahern <dsahern(a)gmail.com> Cc: Peter Zijlstra <a.p.zijlstra(a)chello.nl> Cc: Wang Nan <wangnan0(a)huawei.com> Cc: kernel-team(a)lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/tests/code-reading.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) --- a/tools/perf/tests/code-reading.c +++ b/tools/perf/tests/code-reading.c @@ -224,6 +224,8 @@ static int read_object_code(u64 addr, si unsigned char buf2[BUFSZ]; size_t ret_len; u64 objdump_addr; + const char *objdump_name; + char decomp_name[KMOD_DECOMP_LEN]; int ret; pr_debug("Reading object code for memory address: %#"PRIx64"\n", addr); @@ -284,9 +286,25 @@ static int read_object_code(u64 addr, si state->done[state->done_cnt++] = al.map->start; } + objdump_name = al.map->dso->long_name; + if (dso__needs_decompress(al.map->dso)) { + if (dso__decompress_kmodule_path(al.map->dso, objdump_name, + decomp_name, + sizeof(decomp_name)) < 0) { + pr_debug("decompression failed\n"); + return -1; + } + + objdump_name = decomp_name; + } + /* Read the object code using objdump */ objdump_addr = map__rip_2objdump(al.map, al.addr); - ret = read_via_objdump(al.map->dso->long_name, objdump_addr, buf2, len); + ret = read_via_objdump(objdump_name, objdump_addr, buf2, len); + + if (dso__needs_decompress(al.map->dso)) + unlink(objdump_name); + if (ret > 0) { /* * The kernel maps are inaccurate - assume objdump is right in Patches currently in stable-queue which might be from namhyung(a)kernel.org are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-trace-add-mmap-alias-for-s390.patch queue-4.9/perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/perf-tools-decompress-kernel-module-when-reading-dso-data.patch queue-4.9/perf-tests-decompress-kernel-module-before-objdump.patch queue-4.9/perf-header-set-proper-module-name-when-build-id-event-found.patch

7 years, 2 months

1
0
0 0

Patch "perf report: Ensure the perf DSO mapping matches what libdw sees" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf report: Ensure the perf DSO mapping matches what libdw sees to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Milian Wolff <milian.wolff(a)kdab.com> Date: Fri, 2 Jun 2017 16:37:52 +0200 Subject: perf report: Ensure the perf DSO mapping matches what libdw sees From: Milian Wolff <milian.wolff(a)kdab.com> [ Upstream commit 2538b9e2450ae255337c04356e9e0f8cb9ec48d9 ] In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff <milian.wolff(a)kdab.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/unwind-libdw.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/tools/perf/util/unwind-libdw.c +++ b/tools/perf/util/unwind-libdw.c @@ -38,6 +38,14 @@ static int __report_module(struct addr_l return 0; mod = dwfl_addrmodule(ui->dwfl, ip); + if (mod) { + Dwarf_Addr s; + + dwfl_module_info(mod, NULL, &s, NULL, NULL, NULL, NULL, NULL); + if (s != al->map->start) + mod = 0; + } + if (!mod) mod = dwfl_report_elf(ui->dwfl, dso->short_name, dso->long_name, -1, al->map->start, Patches currently in stable-queue which might be from milian.wolff(a)kdab.com are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch

7 years, 2 months

1
0
0 0

Patch "perf header: Set proper module name when build-id event found" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf header: Set proper module name when build-id event found to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-header-set-proper-module-name-when-build-id-event-found.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Namhyung Kim <namhyung(a)kernel.org> Date: Wed, 31 May 2017 21:01:03 +0900 Subject: perf header: Set proper module name when build-id event found From: Namhyung Kim <namhyung(a)kernel.org> [ Upstream commit 1deec1bd96ccd8beb04d2112a6d12fe20505c3a6 ] When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by: Namhyung Kim <namhyung(a)kernel.org> Acked-by: Jiri Olsa <jolsa(a)kernel.org> Cc: Andi Kleen <andi(a)firstfloor.org> Cc: David Ahern <dsahern(a)gmail.com> Cc: Peter Zijlstra <a.p.zijlstra(a)chello.nl> Cc: kernel-team(a)lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/header.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1454,8 +1454,16 @@ static int __event_process_build_id(stru dso__set_build_id(dso, &bev->build_id); - if (!is_kernel_module(filename, cpumode)) - dso->kernel = dso_type; + if (dso_type != DSO_TYPE_USER) { + struct kmod_path m = { .name = NULL, }; + + if (!kmod_path__parse_name(&m, filename) && m.kmod) + dso__set_short_name(dso, strdup(m.name), true); + else + dso->kernel = dso_type; + + free(m.name); + } build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id); Patches currently in stable-queue which might be from namhyung(a)kernel.org are queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/perf-trace-add-mmap-alias-for-s390.patch queue-4.9/perf-report-ensure-the-perf-dso-mapping-matches-what-libdw-sees.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/perf-tools-decompress-kernel-module-when-reading-dso-data.patch queue-4.9/perf-tests-decompress-kernel-module-before-objdump.patch queue-4.9/perf-header-set-proper-module-name-when-build-id-event-found.patch

7 years, 2 months

1
0
0 0

Patch "perf probe: Add warning message if there is unexpected event name" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf probe: Add warning message if there is unexpected event name to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-probe-add-warning-message-if-there-is-unexpected-event-name.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Masami Hiramatsu <mhiramat(a)kernel.org> Date: Sat, 9 Dec 2017 01:26:46 +0900 Subject: perf probe: Add warning message if there is unexpected event name From: Masami Hiramatsu <mhiramat(a)kernel.org> [ Upstream commit 9f5c6d8777a2d962b0eeacb2a16f37da6bea545b ] This improve the error message so that user can know event-name error before writing new events to kprobe-events interface. E.g. ====== #./perf probe -x /lib64/libc-2.25.so malloc_get_state* Internal error: "malloc_get_state@GLIBC_2" is an invalid event name. Error: Failed to add events. ====== Reported-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Acked-by: Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht(a)linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: Paul Clarke <pc(a)us.ibm.com> Cc: bhargavb <bhargavaramudu(a)gmail.com> Cc: linux-rt-users(a)vger.kernel.org Link: http://lkml.kernel.org/r/151275040665.24652.5188568529237584489.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/perf/util/probe-event.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -2609,6 +2609,14 @@ static int get_new_event_name(char *buf, out: free(nbase); + + /* Final validation */ + if (ret >= 0 && !is_c_func_name(buf)) { + pr_warning("Internal error: \"%s\" is an invalid event name.\n", + buf); + ret = -EINVAL; + } + return ret; } Patches currently in stable-queue which might be from mhiramat(a)kernel.org are queue-4.9/perf-probe-add-warning-message-if-there-is-unexpected-event-name.patch

7 years, 2 months

1
0
0 0

Patch "perf/core: Fix error handling in perf_event_alloc()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf/core: Fix error handling in perf_event_alloc() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-core-fix-error-handling-in-perf_event_alloc.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Mon, 22 May 2017 12:04:18 +0300 Subject: perf/core: Fix error handling in perf_event_alloc() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 36cc2b9222b5106de34085c4dd8635ac67ef5cba ] We don't set an error code here which means that perf_event_alloc() returns ERR_PTR(0) (in other words NULL). The callers are not expecting that and would Oops. Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme(a)kernel.org> Cc: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Stephane Eranian <eranian(a)google.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Vince Weaver <vincent.weaver(a)maine.edu> Fixes: 375637bc5249 ("perf/core: Introduce address range filtering") Link: http://lkml.kernel.org/r/20170522090418.hvs6icgpdo53wkn5@mwanda Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/events/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -9289,8 +9289,10 @@ perf_event_alloc(struct perf_event_attr event->addr_filters_offs = kcalloc(pmu->nr_addr_filters, sizeof(unsigned long), GFP_KERNEL); - if (!event->addr_filters_offs) + if (!event->addr_filters_offs) { + err = -ENOMEM; goto err_per_task; + } /* force hw sync on the address filters */ event->addr_filters_gen = 1; Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/block-fix-an-error-code-in-add_partition.patch queue-4.9/x.509-fix-error-code-in-x509_cert_parse.patch queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch queue-4.9/drm-amdkfd-null-dereference-involving-create_process.patch queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.9/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.9/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/libceph-null-deref-on-crush_decode-error-path.patch

7 years, 2 months

1
0
0 0

Patch "perf/core: Correct event creation with PERF_FORMAT_GROUP" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf/core: Correct event creation with PERF_FORMAT_GROUP to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-core-correct-event-creation-with-perf_format_group.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Peter Zijlstra <peterz(a)infradead.org> Date: Tue, 30 May 2017 11:45:12 +0200 Subject: perf/core: Correct event creation with PERF_FORMAT_GROUP From: Peter Zijlstra <peterz(a)infradead.org> [ Upstream commit ba5213ae6b88fb170c4771fef6553f759c7d8cdd ] Andi was asking about PERF_FORMAT_GROUP vs inherited events, which led to the discovery of a bug from commit: 3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff") - PERF_SAMPLE_GROUP = 1U << 4, + PERF_SAMPLE_READ = 1U << 4, - if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP)) + if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP)) is a clear fail :/ While this changes user visible behaviour; it was previously possible to create an inherited event with PERF_SAMPLE_READ; this is deemed acceptible because its results were always incorrect. Reported-by: Andi Kleen <ak(a)linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme(a)kernel.org> Cc: Jiri Olsa <jolsa(a)kernel.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Stephane Eranian <eranian(a)google.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Vince Weaver <vince(a)deater.net> Fixes: 3dab77fb1bf8 ("perf: Rework/fix the whole read vs group stuff") Link: http://lkml.kernel.org/r/20170530094512.dy2nljns2uq7qa3j@hirez.programming.… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/events/core.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5669,9 +5669,6 @@ static void perf_output_read_one(struct __output_copy(handle, values, n * sizeof(u64)); } -/* - * XXX PERF_FORMAT_GROUP vs inherited events seems difficult. - */ static void perf_output_read_group(struct perf_output_handle *handle, struct perf_event *event, u64 enabled, u64 running) @@ -5716,6 +5713,13 @@ static void perf_output_read_group(struc #define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\ PERF_FORMAT_TOTAL_TIME_RUNNING) +/* + * XXX PERF_SAMPLE_READ vs inherited events seems difficult. + * + * The problem is that its both hard and excessively expensive to iterate the + * child list, not to mention that its impossible to IPI the children running + * on another CPU, from interrupt/NMI context. + */ static void perf_output_read(struct perf_output_handle *handle, struct perf_event *event) { @@ -9259,9 +9263,10 @@ perf_event_alloc(struct perf_event_attr local64_set(&hwc->period_left, hwc->sample_period); /* - * we currently do not support PERF_FORMAT_GROUP on inherited events + * We currently do not support PERF_SAMPLE_READ on inherited events. + * See perf_output_read(). */ - if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP)) + if (attr->inherit && (attr->sample_type & PERF_SAMPLE_READ)) goto err_ns; if (!has_branch_stack(event)) Patches currently in stable-queue which might be from peterz(a)infradead.org are queue-4.9/perf-callchain-force-user_ds-when-invoking-perf_callchain_user.patch queue-4.9/perf-report-fix-off-by-one-for-non-activation-frames.patch queue-4.9/x86-efi-disable-runtime-services-on-kexec-kernel-if-booted-with-efi-old_map.patch queue-4.9/perf-tools-fix-copyfile_offset-update-of-output-offset.patch queue-4.9/sched-numa-use-down_read_trylock-for-the-mmap_sem.patch queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch queue-4.9/perf-core-correct-event-creation-with-perf_format_group.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/x86-tsc-provide-tsc-unstable-boot-parameter.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/cpuhotplug-link-lock-stacks-for-hotplug-callbacks.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/sched-deadline-use-the-revised-wakeup-rule-for-suspending-constrained-dl-tasks.patch

7 years, 2 months

1
0
0 0

Patch "perf/callchain: Force USER_DS when invoking perf_callchain_user()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled perf/callchain: Force USER_DS when invoking perf_callchain_user() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: perf-callchain-force-user_ds-when-invoking-perf_callchain_user.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Will Deacon <will.deacon(a)arm.com> Date: Tue, 9 May 2017 18:00:04 +0100 Subject: perf/callchain: Force USER_DS when invoking perf_callchain_user() From: Will Deacon <will.deacon(a)arm.com> [ Upstream commit 88b0193d9418c00340e45e0a913a0813bc6c8c96 ] Perf can generate and record a user callchain in response to a synchronous request, such as a tracepoint firing. If this happens under set_fs(KERNEL_DS), then we can end up walking the user stack (and dereferencing/saving whatever we find there) without the protections usually afforded by checks such as access_ok. Rather than play whack-a-mole with each architecture's stack unwinding implementation, fix the root of the problem by ensuring that we force USER_DS when invoking perf_callchain_user from the perf core. Reported-by: Al Viro <viro(a)ZenIV.linux.org.uk> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Acked-by: Peter Zijlstra <peterz(a)infradead.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/events/callchain.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/kernel/events/callchain.c +++ b/kernel/events/callchain.c @@ -227,12 +227,18 @@ get_perf_callchain(struct pt_regs *regs, } if (regs) { + mm_segment_t fs; + if (crosstask) goto exit_put; if (add_mark) perf_callchain_store_context(&ctx, PERF_CONTEXT_USER); + + fs = get_fs(); + set_fs(USER_DS); perf_callchain_user(&ctx, regs); + set_fs(fs); } } Patches currently in stable-queue which might be from will.deacon(a)arm.com are queue-4.9/perf-callchain-force-user_ds-when-invoking-perf_callchain_user.patch queue-4.9/arm64-pci-fix-struct-acpi_pci_root_ops-allocation-failure-path.patch queue-4.9/arm64-perf-ignore-exclude_hv-when-kernel-is-running-in-hyp.patch queue-4.9/arm64-kernel-restrict-dev-mem-read-calls-to-linear-region.patch queue-4.9/arm64-futex-fix-undefined-behaviour-with-futex_op_oparg_shift-usage.patch

7 years, 2 months

1
0
0 0

Patch "ovl: persistent inode numbers for upper hardlinks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ovl: persistent inode numbers for upper hardlinks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ovl-persistent-inode-numbers-for-upper-hardlinks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Amir Goldstein <amir73il(a)gmail.com> Date: Mon, 24 Apr 2017 19:54:13 +0300 Subject: ovl: persistent inode numbers for upper hardlinks From: Amir Goldstein <amir73il(a)gmail.com> [ Upstream commit 5b6c9053fb38a66fd5c6177fcf5022b24767811a ] An upper type non directory dentry that is a copy up target should have a reference to its lower copy up origin. There are three ways for an upper type dentry to be instantiated: 1. A lower type dentry that is being copied up 2. An entry that is found in upper dir by ovl_lookup() 3. A negative dentry is hardlinked to an upper type dentry In the first case, the lower reference is set before copy up. In the second case, the lower reference is found by ovl_lookup(). In the last case of hardlinked upper dentry, it is not easy to update the lower reference of the negative dentry. Instead, drop the newly hardlinked negative dentry from dcache and let the next access call ovl_lookup() to find its lower reference. This makes sure that the inode number reported by stat(2) after the hardlink is created is the same inode number that will be reported by stat(2) after mount cycle, which is the inode number of the lower copy up origin of the hardlink source. NOTE that this does not fix breaking of lower hardlinks on copy up, but only fixes the case of lower nlink == 1, whose upper copy up inode is hardlinked in upper dir. Signed-off-by: Amir Goldstein <amir73il(a)gmail.com> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/overlayfs/dir.c | 3 +++ 1 file changed, 3 insertions(+) --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -180,6 +180,9 @@ static void ovl_instantiate(struct dentr inc_nlink(inode); } d_instantiate(dentry, inode); + /* Force lookup of new upper hardlink to find its lower */ + if (hardlink) + d_drop(dentry); } static int ovl_create_upper(struct dentry *dentry, struct inode *inode, Patches currently in stable-queue which might be from amir73il(a)gmail.com are queue-4.9/ovl-persistent-inode-numbers-for-upper-hardlinks.patch

7 years, 2 months

1
0
0 0

Patch "PCI/msi: fix the pci_alloc_irq_vectors_affinity stub" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/msi: fix the pci_alloc_irq_vectors_affinity stub to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-msi-fix-the-pci_alloc_irq_vectors_affinity-stub.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Christoph Hellwig <hch(a)lst.de> Date: Sat, 20 May 2017 18:59:54 +0200 Subject: PCI/msi: fix the pci_alloc_irq_vectors_affinity stub From: Christoph Hellwig <hch(a)lst.de> [ Upstream commit 83b4605b0c16cde5b00c8cf192408d51eab75402 ] We need to return an error for any call that asks for MSI / MSI-X vectors only, so that non-trivial fallback logic can work properly. Also valid dev->irq and use the "correct" errno value based on feedback from Linus. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reported-by: Steven Rostedt <rostedt(a)goodmis.org> Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines") Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/pci.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1348,9 +1348,9 @@ static inline int pci_alloc_irq_vectors( unsigned int min_vecs, unsigned int max_vecs, unsigned int flags) { - if (min_vecs > 1) - return -EINVAL; - return 1; + if ((flags & PCI_IRQ_LEGACY) && min_vecs == 1 && dev->irq) + return 1; + return -ENOSPC; } static inline void pci_free_irq_vectors(struct pci_dev *dev) { Patches currently in stable-queue which might be from hch(a)lst.de are queue-4.9/nvme-pci-fix-multiple-ctrl-removal-scheduling.patch queue-4.9/bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch queue-4.9/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.9/nvme-fix-hang-in-remove-path.patch queue-4.9/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.9/ib-srpt-avoid-that-aborting-a-command-triggers-a-kernel-warning.patch queue-4.9/blk-mq-fix-race-between-updating-nr_hw_queues-and-switching-io-sched.patch queue-4.9/pci-msi-fix-the-pci_alloc_irq_vectors_affinity-stub.patch queue-4.9/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch queue-4.9/ib-srpt-fix-abort-handling.patch

7 years, 2 months

1
0
0 0

Patch "ovl: filter trusted xattr for non-admin" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ovl: filter trusted xattr for non-admin to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ovl-filter-trusted-xattr-for-non-admin.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Miklos Szeredi <mszeredi(a)redhat.com> Date: Mon, 29 May 2017 15:15:27 +0200 Subject: ovl: filter trusted xattr for non-admin From: Miklos Szeredi <mszeredi(a)redhat.com> [ Upstream commit a082c6f680da298cf075886ff032f32ccb7c5e1a ] Filesystems filter out extended attributes in the "trusted." domain for unprivlieged callers. Overlay calls underlying filesystem's method with elevated privs, so need to do the filtering in overlayfs too. Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/overlayfs/inode.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -227,6 +227,16 @@ int ovl_xattr_get(struct dentry *dentry, return res; } +static bool ovl_can_list(const char *s) +{ + /* List all non-trusted xatts */ + if (strncmp(s, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) != 0) + return true; + + /* Never list trusted.overlay, list other trusted for superuser only */ + return !ovl_is_private_xattr(s) && capable(CAP_SYS_ADMIN); +} + ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size) { struct dentry *realdentry = ovl_dentry_real(dentry); @@ -250,7 +260,7 @@ ssize_t ovl_listxattr(struct dentry *den return -EIO; len -= slen; - if (ovl_is_private_xattr(s)) { + if (!ovl_can_list(s)) { res -= slen; memmove(s, s + slen, len); } else { Patches currently in stable-queue which might be from mszeredi(a)redhat.com are queue-4.9/ovl-persistent-inode-numbers-for-upper-hardlinks.patch queue-4.9/ovl-filter-trusted-xattr-for-non-admin.patch

7 years, 2 months

1
0
0 0

Patch "nvme-pci: fix multiple ctrl removal scheduling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme-pci: fix multiple ctrl removal scheduling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-pci-fix-multiple-ctrl-removal-scheduling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rakesh Pandit <rakesh(a)tuxera.com> Date: Mon, 5 Jun 2017 14:43:11 +0300 Subject: nvme-pci: fix multiple ctrl removal scheduling From: Rakesh Pandit <rakesh(a)tuxera.com> [ Upstream commit 82b057caefaff2a891f821a617d939f46e03e844 ] Commit c5f6ce97c1210 tries to address multiple resets but fails as work_busy doesn't involve any synchronization and can fail. This is reproducible easily as can be seen by WARNING below which is triggered with line: WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING) Allowing multiple resets can result in multiple controller removal as well if different conditions inside nvme_reset_work fail and which might deadlock on device_release_driver. [ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0 [ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast... [ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart.. [ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13 [ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016 [ 480.327066] Workqueue: nvme nvme_reset_work [ 480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000 [ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0 [ 480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246 [ 480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200 [ 480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128 [ 480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000 [ 480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000 [ 480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128 [ 480.327072] FS: 0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000 [ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0 [ 480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 480.327075] Call Trace: [ 480.327079] ? __switch_to+0x227/0x400 [ 480.327081] process_one_work+0x18c/0x3a0 [ 480.327082] worker_thread+0x4e/0x3b0 [ 480.327084] kthread+0x109/0x140 [ 480.327085] ? process_one_work+0x3a0/0x3a0 [ 480.327087] ? kthread_park+0x60/0x60 [ 480.327102] ret_from_fork+0x2c/0x40 [ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f..... This patch addresses the problem by using state of controller to decide whether reset should be queued or not as state change is synchronizated using controller spinlock. Also cancel_work_sync is used to make sure remove cancels the reset_work and waits for it to finish. This patch also changes return value from -ENODEV to more appropriate -EBUSY if nvme_reset fails to change state. Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets") Signed-off-by: Rakesh Pandit <rakesh(a)tuxera.com> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/host/pci.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1263,7 +1263,7 @@ static bool nvme_should_reset(struct nvm bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO); /* If there is a reset ongoing, we shouldn't reset again. */ - if (work_busy(&dev->reset_work)) + if (dev->ctrl.state == NVME_CTRL_RESETTING) return false; /* We shouldn't reset unless the controller is on fatal error state @@ -1755,7 +1755,7 @@ static void nvme_reset_work(struct work_ struct nvme_dev *dev = container_of(work, struct nvme_dev, reset_work); int result = -ENODEV; - if (WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)) + if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) goto out; /* @@ -1765,9 +1765,6 @@ static void nvme_reset_work(struct work_ if (dev->ctrl.ctrl_config & NVME_CC_ENABLE) nvme_dev_disable(dev, false); - if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) - goto out; - result = nvme_pci_enable(dev); if (result) goto out; @@ -1841,8 +1838,8 @@ static int nvme_reset(struct nvme_dev *d { if (!dev->ctrl.admin_q || blk_queue_dying(dev->ctrl.admin_q)) return -ENODEV; - if (work_busy(&dev->reset_work)) - return -ENODEV; + if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) + return -EBUSY; if (!queue_work(nvme_workq, &dev->reset_work)) return -EBUSY; return 0; @@ -1944,6 +1941,7 @@ static int nvme_probe(struct pci_dev *pd if (result) goto release_pools; + nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING); dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); queue_work(nvme_workq, &dev->reset_work); @@ -1987,6 +1985,7 @@ static void nvme_remove(struct pci_dev * nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING); + cancel_work_sync(&dev->reset_work); pci_set_drvdata(pdev, NULL); if (!pci_device_is_present(pdev)) { Patches currently in stable-queue which might be from rakesh(a)tuxera.com are queue-4.9/nvme-pci-fix-multiple-ctrl-removal-scheduling.patch queue-4.9/nvme-fix-hang-in-remove-path.patch

7 years, 2 months

1
0
0 0

Patch "nvme: fix hang in remove path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nvme: fix hang in remove path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nvme-fix-hang-in-remove-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Ming Lei <ming.lei(a)redhat.com> Date: Fri, 2 Jun 2017 16:32:08 +0800 Subject: nvme: fix hang in remove path From: Ming Lei <ming.lei(a)redhat.com> [ Upstream commit 82654b6b8ef8b93ee87a97fc562f87f081fc2f91 ] We need to start admin queues too in nvme_kill_queues() for avoiding hang in remove path[1]. This patch is very similar with 806f026f9b901eaf(nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()). [1] hang stack trace [<ffffffff813c9716>] blk_execute_rq+0x56/0x80 [<ffffffff815cb6e9>] __nvme_submit_sync_cmd+0x89/0xf0 [<ffffffff815ce7be>] nvme_set_features+0x5e/0x90 [<ffffffff815ce9f6>] nvme_configure_apst+0x166/0x200 [<ffffffff815cef45>] nvme_set_latency_tolerance+0x35/0x50 [<ffffffff8157bd11>] apply_constraint+0xb1/0xc0 [<ffffffff8157cbb4>] dev_pm_qos_constraints_destroy+0xf4/0x1f0 [<ffffffff8157b44a>] dpm_sysfs_remove+0x2a/0x60 [<ffffffff8156d951>] device_del+0x101/0x320 [<ffffffff8156db8a>] device_unregister+0x1a/0x60 [<ffffffff8156dc4c>] device_destroy+0x3c/0x50 [<ffffffff815cd295>] nvme_uninit_ctrl+0x45/0xa0 [<ffffffff815d4858>] nvme_remove+0x78/0x110 [<ffffffff81452b69>] pci_device_remove+0x39/0xb0 [<ffffffff81572935>] device_release_driver_internal+0x155/0x210 [<ffffffff81572a02>] device_release_driver+0x12/0x20 [<ffffffff815d36fb>] nvme_remove_dead_ctrl_work+0x6b/0x70 [<ffffffff810bf3bc>] process_one_work+0x18c/0x3a0 [<ffffffff810bf61e>] worker_thread+0x4e/0x3b0 [<ffffffff810c5ac9>] kthread+0x109/0x140 [<ffffffff8185800c>] ret_from_fork+0x2c/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Fixes: c5552fde102fc("nvme: Enable autonomous power state transitions") Reported-by: Rakesh Pandit <rakesh(a)tuxera.com> Tested-by: Rakesh Pandit <rakesh(a)tuxera.com> Reviewed-by: Sagi Grimberg <sagi(a)grimberg.me> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/nvme/host/core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2040,6 +2040,10 @@ void nvme_kill_queues(struct nvme_ctrl * struct nvme_ns *ns; mutex_lock(&ctrl->namespaces_mutex); + + /* Forcibly start all queues to avoid having stuck requests */ + blk_mq_start_hw_queues(ctrl->admin_q); + list_for_each_entry(ns, &ctrl->namespaces, list) { /* * Revalidating a dead namespace sets capacity to 0. This will Patches currently in stable-queue which might be from ming.lei(a)redhat.com are queue-4.9/blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch queue-4.9/nvme-fix-hang-in-remove-path.patch queue-4.9/fix-loop-device-flush-before-configure-v3.patch queue-4.9/blk-mq-fix-race-between-updating-nr_hw_queues-and-switching-io-sched.patch

7 years, 2 months

1
0
0 0

Patch "NFSv4.1: Work around a Linux server bug..." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFSv4.1: Work around a Linux server bug... to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsv4.1-work-around-a-linux-server-bug.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Trond Myklebust <trond.myklebust(a)primarydata.com> Date: Tue, 9 May 2017 15:47:15 -0400 Subject: NFSv4.1: Work around a Linux server bug... From: Trond Myklebust <trond.myklebust(a)primarydata.com> [ Upstream commit f4b23de3dda1536590787c9e5c3d16b8738ab108 ] It turns out the Linux server has a bug in its implementation of supattr_exclcreat; it returns the set of all attributes, whether or not they are supported by minor version 1. In order to avoid a regression, we therefore apply the supported_attrs as a mask on top of whatever the server sent us. Reported-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/nfs4proc.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3300,6 +3300,7 @@ static int _nfs4_server_capabilities(str .rpc_resp = &res, }; int status; + int i; bitmask[0] = FATTR4_WORD0_SUPPORTED_ATTRS | FATTR4_WORD0_FH_EXPIRE_TYPE | @@ -3365,8 +3366,13 @@ static int _nfs4_server_capabilities(str server->cache_consistency_bitmask[0] &= FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE; server->cache_consistency_bitmask[1] &= FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY; server->cache_consistency_bitmask[2] = 0; + + /* Avoid a regression due to buggy server */ + for (i = 0; i < ARRAY_SIZE(res.exclcreat_bitmask); i++) + res.exclcreat_bitmask[i] &= res.attr_bitmask[i]; memcpy(server->exclcreat_bitmask, res.exclcreat_bitmask, sizeof(server->exclcreat_bitmask)); + server->acl_bitmask = res.acl_bitmask; server->fh_expire_type = res.fh_expire_type; } Patches currently in stable-queue which might be from trond.myklebust(a)primarydata.com are queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/nfsv4.1-work-around-a-linux-server-bug.patch queue-4.9/sunrpc-ensure-correct-error-is-reported-by-xs_tcp_setup_socket.patch queue-4.9/nfsv4.1-reclaim_complete-must-handle-nfs4err_conn_not_bound_to_session.patch

7 years, 2 months

1
0
0 0

Patch "NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsv4.1-reclaim_complete-must-handle-nfs4err_conn_not_bound_to_session.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Trond Myklebust <trond.myklebust(a)primarydata.com> Date: Thu, 4 May 2017 13:44:04 -0400 Subject: NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION From: Trond Myklebust <trond.myklebust(a)primarydata.com> [ Upstream commit 0048fdd06614a4ea088f9fcad11511956b795698 ] If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we are trunking, then RECLAIM_COMPLETE must handle that by calling nfs4_schedule_session_recovery() and then retrying. Reported-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Tested-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/nfs4proc.c | 7 ++++++- fs/nfs/nfs4state.c | 10 +++++++--- 2 files changed, 13 insertions(+), 4 deletions(-) --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -8173,6 +8173,12 @@ static int nfs41_reclaim_complete_handle /* fall through */ case -NFS4ERR_RETRY_UNCACHED_REP: return -EAGAIN; + case -NFS4ERR_BADSESSION: + case -NFS4ERR_DEADSESSION: + case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION: + nfs4_schedule_session_recovery(clp->cl_session, + task->tk_status); + break; default: nfs4_schedule_lease_recovery(clp); } @@ -8251,7 +8257,6 @@ static int nfs41_proc_reclaim_complete(s if (status == 0) status = task->tk_status; rpc_put_task(task); - return 0; out: dprintk("<-- %s status=%d\n", __func__, status); return status; --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1637,13 +1637,14 @@ static void nfs4_state_start_reclaim_reb nfs4_state_mark_reclaim_helper(clp, nfs4_state_mark_reclaim_reboot); } -static void nfs4_reclaim_complete(struct nfs_client *clp, +static int nfs4_reclaim_complete(struct nfs_client *clp, const struct nfs4_state_recovery_ops *ops, struct rpc_cred *cred) { /* Notify the server we're done reclaiming our state */ if (ops->reclaim_complete) - (void)ops->reclaim_complete(clp, cred); + return ops->reclaim_complete(clp, cred); + return 0; } static void nfs4_clear_reclaim_server(struct nfs_server *server) @@ -1690,13 +1691,16 @@ static void nfs4_state_end_reclaim_reboo { const struct nfs4_state_recovery_ops *ops; struct rpc_cred *cred; + int err; if (!nfs4_state_clear_reclaim_reboot(clp)) return; ops = clp->cl_mvops->reboot_recovery_ops; cred = nfs4_get_clid_cred(clp); - nfs4_reclaim_complete(clp, ops, cred); + err = nfs4_reclaim_complete(clp, ops, cred); put_rpccred(cred); + if (err == -NFS4ERR_CONN_NOT_BOUND_TO_SESSION) + set_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state); } static void nfs4_state_start_reclaim_nograce(struct nfs_client *clp) Patches currently in stable-queue which might be from trond.myklebust(a)primarydata.com are queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/nfsv4.1-work-around-a-linux-server-bug.patch queue-4.9/sunrpc-ensure-correct-error-is-reported-by-xs_tcp_setup_socket.patch queue-4.9/nfsv4.1-reclaim_complete-must-handle-nfs4err_conn_not_bound_to_session.patch

7 years, 2 months

1
0
0 0

Patch "netxen_nic: set rcode to the return status from the call to netxen_issue_cmd" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netxen_nic: set rcode to the return status from the call to netxen_issue_cmd to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 9 May 2017 17:19:42 +0100 Subject: netxen_nic: set rcode to the return status from the call to netxen_issue_cmd From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit 0fe20fafd1791f993806d417048213ec57b81045 ] Currently rcode is being initialized to NX_RCODE_SUCCESS and later it is checked to see if it is not NX_RCODE_SUCCESS which is never true. It appears that there is an unintentional missing assignment of rcode from the return of the call to netxen_issue_cmd() that was dropped in an earlier fix, so add it in. Detected by CoverityScan, CID#401900 ("Logically dead code") Fixes: 2dcd5d95ad6b2 ("netxen_nic: fix cdrp race condition") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c @@ -247,7 +247,7 @@ nx_fw_cmd_set_mtu(struct netxen_adapter cmd.req.arg3 = 0; if (recv_ctx->state == NX_HOST_CTX_STATE_ACTIVE) - netxen_issue_cmd(adapter, &cmd); + rcode = netxen_issue_cmd(adapter, &cmd); if (rcode != NX_RCODE_SUCCESS) return -EIO; Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.9/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.9/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.9/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.9/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

7 years, 2 months

1
0
0 0

Patch "netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-ctnetlink-fix-incorrect-nf_ct_put-during-hash-resize.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Liping Zhang <zlpnobody(a)gmail.com> Date: Sun, 21 May 2017 07:22:49 +0800 Subject: netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize From: Liping Zhang <zlpnobody(a)gmail.com> [ Upstream commit fefa92679dbe0c613e62b6c27235dcfbe9640ad1 ] If nf_conntrack_htable_size was adjusted by the user during the ct dump operation, we may invoke nf_ct_put twice for the same ct, i.e. the "last" ct. This will cause the ct will be freed but still linked in hash buckets. It's very easy to reproduce the problem by the following commands: # while : ; do echo $RANDOM > /proc/sys/net/netfilter/nf_conntrack_buckets done # while : ; do conntrack -L done # iperf -s 127.0.0.1 & # iperf -c 127.0.0.1 -P 60 -t 36000 After a while, the system will hang like this: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [bash:20184] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [iperf:20382] ... So at last if we find cb->args[1] is equal to "last", this means hash resize happened, then we can set cb->args[1] to 0 to fix the above issue. Fixes: d205dc40798d ("[NETFILTER]: ctnetlink: fix deadlock in table dumping") Signed-off-by: Liping Zhang <zlpnobody(a)gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/nf_conntrack_netlink.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -890,8 +890,13 @@ restart: } out: local_bh_enable(); - if (last) + if (last) { + /* nf ct hash resize happened, now clear the leftover. */ + if ((struct nf_conn *)cb->args[1] == last) + cb->args[1] = 0; + nf_ct_put(last); + } while (i) { i--; Patches currently in stable-queue which might be from zlpnobody(a)gmail.com are queue-4.9/netfilter-ctnetlink-fix-incorrect-nf_ct_put-during-hash-resize.patch

7 years, 2 months

1
0
0 0

Patch "netfilter: conntrack: don't call iter for non-confirmed conntracks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: conntrack: don't call iter for non-confirmed conntracks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-conntrack-don-t-call-iter-for-non-confirmed-conntracks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Florian Westphal <fw(a)strlen.de> Date: Sun, 21 May 2017 12:52:56 +0200 Subject: netfilter: conntrack: don't call iter for non-confirmed conntracks From: Florian Westphal <fw(a)strlen.de> [ Upstream commit b0feacaad13a0aa9657c37ed80991575981e2e3b ] nf_ct_iterate_cleanup_net currently calls iter() callback also for conntracks on the unconfirmed list, but this is unsafe. Acesses to nf_conn are fine, but some users access the extension area in the iter() callback, but that does only work reliably for confirmed conntracks (ct->ext can be reallocated at any time for unconfirmed conntrack). The seond issue is that there is a short window where a conntrack entry is neither on the list nor in the table: To confirm an entry, it is first removed from the unconfirmed list, then insert into the table. Fix this by iterating the unconfirmed list first and marking all entries as dying, then wait for rcu grace period. This makes sure all entries that were about to be confirmed either are in the main table, or will be dropped soon. Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/nf_conntrack_core.c | 39 ++++++++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 10 deletions(-) --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1542,7 +1542,6 @@ get_next_corpse(struct net *net, int (*i struct nf_conntrack_tuple_hash *h; struct nf_conn *ct; struct hlist_nulls_node *n; - int cpu; spinlock_t *lockp; for (; *bucket < nf_conntrack_htable_size; (*bucket)++) { @@ -1564,24 +1563,40 @@ get_next_corpse(struct net *net, int (*i cond_resched(); } + return NULL; +found: + atomic_inc(&ct->ct_general.use); + spin_unlock(lockp); + local_bh_enable(); + return ct; +} + +static void +__nf_ct_unconfirmed_destroy(struct net *net) +{ + int cpu; + for_each_possible_cpu(cpu) { - struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu); + struct nf_conntrack_tuple_hash *h; + struct hlist_nulls_node *n; + struct ct_pcpu *pcpu; + + pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu); spin_lock_bh(&pcpu->lock); hlist_nulls_for_each_entry(h, n, &pcpu->unconfirmed, hnnode) { + struct nf_conn *ct; + ct = nf_ct_tuplehash_to_ctrack(h); - if (iter(ct, data)) - set_bit(IPS_DYING_BIT, &ct->status); + + /* we cannot call iter() on unconfirmed list, the + * owning cpu can reallocate ct->ext at any time. + */ + set_bit(IPS_DYING_BIT, &ct->status); } spin_unlock_bh(&pcpu->lock); cond_resched(); } - return NULL; -found: - atomic_inc(&ct->ct_general.use); - spin_unlock(lockp); - local_bh_enable(); - return ct; } void nf_ct_iterate_cleanup(struct net *net, @@ -1596,6 +1611,10 @@ void nf_ct_iterate_cleanup(struct net *n if (atomic_read(&net->ct.count) == 0) return; + __nf_ct_unconfirmed_destroy(net); + + synchronize_net(); + while ((ct = get_next_corpse(net, iter, data, &bucket)) != NULL) { /* Time to push up daises... */ Patches currently in stable-queue which might be from fw(a)strlen.de are queue-4.9/netfilter-conntrack-don-t-call-iter-for-non-confirmed-conntracks.patch

7 years, 2 months

1
0
0 0

Patch "net: x25: fix one potential use-after-free issue" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: x25: fix one potential use-after-free issue to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-x25-fix-one-potential-use-after-free-issue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: linzhang <xiaolou4617(a)gmail.com> Date: Wed, 17 May 2017 12:05:07 +0800 Subject: net: x25: fix one potential use-after-free issue From: linzhang <xiaolou4617(a)gmail.com> [ Upstream commit 64df6d525fcff1630098db9238bfd2b3e092d5c1 ] The function x25_init is not properly unregister related resources on error handler.It is will result in kernel oops if x25_init init failed, so add properly unregister call on error handler. Also, i adjust the coding style and make x25_register_sysctl properly return failure. Signed-off-by: linzhang <xiaolou4617(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/x25.h | 4 ++-- net/x25/af_x25.c | 24 ++++++++++++++++-------- net/x25/sysctl_net_x25.c | 5 ++++- 3 files changed, 22 insertions(+), 11 deletions(-) --- a/include/net/x25.h +++ b/include/net/x25.h @@ -298,10 +298,10 @@ void x25_check_rbuf(struct sock *); /* sysctl_net_x25.c */ #ifdef CONFIG_SYSCTL -void x25_register_sysctl(void); +int x25_register_sysctl(void); void x25_unregister_sysctl(void); #else -static inline void x25_register_sysctl(void) {}; +static inline int x25_register_sysctl(void) { return 0; }; static inline void x25_unregister_sysctl(void) {}; #endif /* CONFIG_SYSCTL */ --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -1790,32 +1790,40 @@ void x25_kill_by_neigh(struct x25_neigh static int __init x25_init(void) { - int rc = proto_register(&x25_proto, 0); + int rc; - if (rc != 0) + rc = proto_register(&x25_proto, 0); + if (rc) goto out; rc = sock_register(&x25_family_ops); - if (rc != 0) + if (rc) goto out_proto; dev_add_pack(&x25_packet_type); rc = register_netdevice_notifier(&x25_dev_notifier); - if (rc != 0) + if (rc) goto out_sock; - pr_info("Linux Version 0.2\n"); + rc = x25_register_sysctl(); + if (rc) + goto out_dev; - x25_register_sysctl(); rc = x25_proc_init(); - if (rc != 0) - goto out_dev; + if (rc) + goto out_sysctl; + + pr_info("Linux Version 0.2\n"); + out: return rc; +out_sysctl: + x25_unregister_sysctl(); out_dev: unregister_netdevice_notifier(&x25_dev_notifier); out_sock: + dev_remove_pack(&x25_packet_type); sock_unregister(AF_X25); out_proto: proto_unregister(&x25_proto); --- a/net/x25/sysctl_net_x25.c +++ b/net/x25/sysctl_net_x25.c @@ -73,9 +73,12 @@ static struct ctl_table x25_table[] = { { 0, }, }; -void __init x25_register_sysctl(void) +int __init x25_register_sysctl(void) { x25_table_header = register_net_sysctl(&init_net, "net/x25", x25_table); + if (!x25_table_header) + return -ENOMEM; + return 0; } void x25_unregister_sysctl(void) Patches currently in stable-queue which might be from xiaolou4617(a)gmail.com are queue-4.9/net-x25-fix-one-potential-use-after-free-issue.patch queue-4.9/net-llc-add-lock_sock-in-llc_ui_bind-to-avoid-a-race-condition.patch queue-4.9/net-ieee802154-fix-net_device-reference-release-too-early.patch

7 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror