The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x b321c31c9b7b309dcde5e8854b741c8e6a9a05f0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023072323-trident-unturned-7999@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
b321c31c9b7b ("KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption")
0c2f9acf6ae7 ("KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded")
8681f7175901 ("KVM: arm64: PMU: Restore the host's PMUSERENR_EL0")
009d6dc87a56 ("ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM")
711432770f78 ("perf: pmuv3: Abstract PMU version checks")
df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
7755cec63ade ("arm64: perf: Move PMUv3 driver to drivers/perf")
cc91b9481605 ("arm64/perf: Replace PMU version number '0' with ID_AA64DFR0_EL1_PMUVer_NI")
4151bb636acf ("KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE")
bb0cca240a16 ("Merge branch kvm-arm64/single-step-async-exception into kvmarm-master/next")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz(a)kernel.org>
Date: Thu, 13 Jul 2023 08:06:57 +0100
Subject: [PATCH] KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t
preemption
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable(a)vger.kernel.org
Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66(a)hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui(a)huawei.com>
Tested-by: Xiang Chen <chenxiang66(a)hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton(a)linux.dev>
Signed-off-by: Marc Zyngier <maz(a)kernel.org>
Acked-by: Zenghui Yu <yuzenghui(a)huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev>
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 8b6096753740..d3dd05bbfe23 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -727,6 +727,8 @@ struct kvm_vcpu_arch {
#define DBG_SS_ACTIVE_PENDING __vcpu_single_flag(sflags, BIT(5))
/* PMUSERENR for the guest EL0 is on physical CPU */
#define PMUSERENR_ON_CPU __vcpu_single_flag(sflags, BIT(6))
+/* WFI instruction trapped */
+#define IN_WFI __vcpu_single_flag(sflags, BIT(7))
/* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index a402ea5511f3..72dc53a75d1c 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -718,13 +718,15 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)
*/
preempt_disable();
kvm_vgic_vmcr_sync(vcpu);
- vgic_v4_put(vcpu, true);
+ vcpu_set_flag(vcpu, IN_WFI);
+ vgic_v4_put(vcpu);
preempt_enable();
kvm_vcpu_halt(vcpu);
vcpu_clear_flag(vcpu, IN_WFIT);
preempt_disable();
+ vcpu_clear_flag(vcpu, IN_WFI);
vgic_v4_load(vcpu);
preempt_enable();
}
@@ -792,7 +794,7 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
/* The distributor enable bits were changed */
preempt_disable();
- vgic_v4_put(vcpu, false);
+ vgic_v4_put(vcpu);
vgic_v4_load(vcpu);
preempt_enable();
}
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
index c3b8e132d599..3dfc8b84e03e 100644
--- a/arch/arm64/kvm/vgic/vgic-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -749,7 +749,7 @@ void vgic_v3_put(struct kvm_vcpu *vcpu)
{
struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
- WARN_ON(vgic_v4_put(vcpu, false));
+ WARN_ON(vgic_v4_put(vcpu));
vgic_v3_vmcr_sync(vcpu);
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index c1c28fe680ba..339a55194b2c 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -336,14 +336,14 @@ void vgic_v4_teardown(struct kvm *kvm)
its_vm->vpes = NULL;
}
-int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db)
+int vgic_v4_put(struct kvm_vcpu *vcpu)
{
struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
return 0;
- return its_make_vpe_non_resident(vpe, need_db);
+ return its_make_vpe_non_resident(vpe, !!vcpu_get_flag(vcpu, IN_WFI));
}
int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -354,6 +354,9 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
if (!vgic_supports_direct_msis(vcpu->kvm) || vpe->resident)
return 0;
+ if (vcpu_get_flag(vcpu, IN_WFI))
+ return 0;
+
/*
* Before making the VPE resident, make sure the redistributor
* corresponding to our current CPU expects us here. See the
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 402b545959af..5b27f94d4fad 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -431,7 +431,7 @@ int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int irq,
int vgic_v4_load(struct kvm_vcpu *vcpu);
void vgic_v4_commit(struct kvm_vcpu *vcpu);
-int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db);
+int vgic_v4_put(struct kvm_vcpu *vcpu);
/* CPU HP callbacks */
void kvm_vgic_cpu_up(void);
Recently Luiz Capitulino reported BPF test failure for kernel version
6.1.36 (see [7]). The following test_verifier test failed:
"precise: ST insn causing spi > allocated_stack".
After back-port of the following upstream commit:
ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Investigation in [8] shows that test failure is not a bug, but a
difference in BPF verifier behavior between upstream, where commits
[1,2,3] by Andrii Nakryiko are present, and 6.1.36, where these
commits are absent. Both Luiz and Greg suggested back-porting [1,2,3]
from upstream to avoid divergences.
Commits [1,2,3] break test_progs selftest "align/packet variable offset",
commit [4] fixes this selftest.
I did some additional testing using the following compiler versions:
- Kernel compilation
- gcc version 11.3.0
- BPF tests compilation
- clang version 16.0.6
- clang version 17.0.0 (fa46feb31481)
And identified a few more failing BPF selftests:
- Tests failing with LLVM 16:
- test_verifier:
- precise: ST insn causing spi > allocated_stack FAIL (fixed by [1,2,3])
- test_progs:
- sk_assign (fixed by [6])
- Tests failing with LLVM 17:
- test_verifier:
- precise: ST insn causing spi > allocated_stack FAIL (fixed by [1,2,3])
- test_progs:
- fexit_bpf2bpf/func_replace_verify (fixed by [5])
- fexit_bpf2bpf/func_replace_return_code (fixed by [5])
- sk_assign (fixed by [6])
Commits [4,5,6] only apply to BPF selftests and don't change verifier
behavior.
After applying all of the listed commits I have test_verifier,
test_progs, test_progs-no_alu32 and test_maps passing on my x86 setup,
both for LLVM 16 and LLVM 17.
Upstream commits in chronological order:
[1] be2ef8161572 ("bpf: allow precision tracking for programs with subprogs")
[2] f63181b6ae79 ("bpf: stop setting precise in current state")
[3] 7a830b53c17b ("bpf: aggressively forget precise markings during state checkpointing")
[4] 4f999b767769 ("selftests/bpf: make test_align selftest more robust")
[5] 63d78b7e8ca2 ("selftests/bpf: Workaround verification failure for fexit_bpf2bpf/func_replace_return_code")
[6] 7ce878ca81bc ("selftests/bpf: Fix sk_assign on s390x")
Links:
[7] https://lore.kernel.org/stable/935c4751-d368-df29-33a6-9f4fcae720fa@amazon.…
[8] https://lore.kernel.org/stable/c9b10a8a551edafdfec855fbd35757c6238ad258.cam…
Changelog:
V1 -> V2: added missing signed-off-by tags
V1: https://lore.kernel.org/stable/20230722004514.767618-1-eddyz87@gmail.com/
Reported-by: Luiz Capitulino <luizcap(a)amazon.com>
Andrii Nakryiko (4):
bpf: allow precision tracking for programs with subprogs
bpf: stop setting precise in current state
bpf: aggressively forget precise markings during state checkpointing
selftests/bpf: make test_align selftest more robust
Ilya Leoshkevich (1):
selftests/bpf: Fix sk_assign on s390x
Yonghong Song (1):
selftests/bpf: Workaround verification failure for
fexit_bpf2bpf/func_replace_return_code
kernel/bpf/verifier.c | 202 ++++++++++++++++--
.../testing/selftests/bpf/prog_tests/align.c | 38 ++--
.../selftests/bpf/prog_tests/sk_assign.c | 25 ++-
.../selftests/bpf/progs/connect4_prog.c | 2 +-
.../selftests/bpf/progs/test_sk_assign.c | 11 +
.../bpf/progs/test_sk_assign_libbpf.c | 3 +
6 files changed, 247 insertions(+), 34 deletions(-)
create mode 100644 tools/testing/selftests/bpf/progs/test_sk_assign_libbpf.c
--
2.41.0
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x b321c31c9b7b309dcde5e8854b741c8e6a9a05f0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023072324-aviation-delirious-b27d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
b321c31c9b7b ("KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption")
0c2f9acf6ae7 ("KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded")
8681f7175901 ("KVM: arm64: PMU: Restore the host's PMUSERENR_EL0")
009d6dc87a56 ("ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM")
711432770f78 ("perf: pmuv3: Abstract PMU version checks")
df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
7755cec63ade ("arm64: perf: Move PMUv3 driver to drivers/perf")
cc91b9481605 ("arm64/perf: Replace PMU version number '0' with ID_AA64DFR0_EL1_PMUVer_NI")
4151bb636acf ("KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE")
bb0cca240a16 ("Merge branch kvm-arm64/single-step-async-exception into kvmarm-master/next")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <maz(a)kernel.org>
Date: Thu, 13 Jul 2023 08:06:57 +0100
Subject: [PATCH] KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t
preemption
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable(a)vger.kernel.org
Fixes: 8e01d9a396e6 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66(a)hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui(a)huawei.com>
Tested-by: Xiang Chen <chenxiang66(a)hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton(a)linux.dev>
Signed-off-by: Marc Zyngier <maz(a)kernel.org>
Acked-by: Zenghui Yu <yuzenghui(a)huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev>
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 8b6096753740..d3dd05bbfe23 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -727,6 +727,8 @@ struct kvm_vcpu_arch {
#define DBG_SS_ACTIVE_PENDING __vcpu_single_flag(sflags, BIT(5))
/* PMUSERENR for the guest EL0 is on physical CPU */
#define PMUSERENR_ON_CPU __vcpu_single_flag(sflags, BIT(6))
+/* WFI instruction trapped */
+#define IN_WFI __vcpu_single_flag(sflags, BIT(7))
/* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index a402ea5511f3..72dc53a75d1c 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -718,13 +718,15 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)
*/
preempt_disable();
kvm_vgic_vmcr_sync(vcpu);
- vgic_v4_put(vcpu, true);
+ vcpu_set_flag(vcpu, IN_WFI);
+ vgic_v4_put(vcpu);
preempt_enable();
kvm_vcpu_halt(vcpu);
vcpu_clear_flag(vcpu, IN_WFIT);
preempt_disable();
+ vcpu_clear_flag(vcpu, IN_WFI);
vgic_v4_load(vcpu);
preempt_enable();
}
@@ -792,7 +794,7 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
/* The distributor enable bits were changed */
preempt_disable();
- vgic_v4_put(vcpu, false);
+ vgic_v4_put(vcpu);
vgic_v4_load(vcpu);
preempt_enable();
}
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
index c3b8e132d599..3dfc8b84e03e 100644
--- a/arch/arm64/kvm/vgic/vgic-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -749,7 +749,7 @@ void vgic_v3_put(struct kvm_vcpu *vcpu)
{
struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
- WARN_ON(vgic_v4_put(vcpu, false));
+ WARN_ON(vgic_v4_put(vcpu));
vgic_v3_vmcr_sync(vcpu);
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index c1c28fe680ba..339a55194b2c 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -336,14 +336,14 @@ void vgic_v4_teardown(struct kvm *kvm)
its_vm->vpes = NULL;
}
-int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db)
+int vgic_v4_put(struct kvm_vcpu *vcpu)
{
struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
return 0;
- return its_make_vpe_non_resident(vpe, need_db);
+ return its_make_vpe_non_resident(vpe, !!vcpu_get_flag(vcpu, IN_WFI));
}
int vgic_v4_load(struct kvm_vcpu *vcpu)
@@ -354,6 +354,9 @@ int vgic_v4_load(struct kvm_vcpu *vcpu)
if (!vgic_supports_direct_msis(vcpu->kvm) || vpe->resident)
return 0;
+ if (vcpu_get_flag(vcpu, IN_WFI))
+ return 0;
+
/*
* Before making the VPE resident, make sure the redistributor
* corresponding to our current CPU expects us here. See the
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 402b545959af..5b27f94d4fad 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -431,7 +431,7 @@ int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int irq,
int vgic_v4_load(struct kvm_vcpu *vcpu);
void vgic_v4_commit(struct kvm_vcpu *vcpu);
-int vgic_v4_put(struct kvm_vcpu *vcpu, bool need_db);
+int vgic_v4_put(struct kvm_vcpu *vcpu);
/* CPU HP callbacks */
void kvm_vgic_cpu_up(void);
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 6c41468c7c12d74843bb414fc00307ea8a6318c3
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023041135-yippee-shabby-b9ad@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
6c41468c7c12 ("KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection")
d4963e319f1f ("KVM: x86: Make kvm_queued_exception a properly named, visible struct")
6ad75c5c99f7 ("KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception")
5623f751bd9c ("KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1)")
8d178f460772 ("KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like")
eba9799b5a6e ("KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS")
a61d7c5432ac ("KVM: x86: Trace re-injected exceptions")
6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
3741aec4c38f ("KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported")
cd9e6da8048c ("KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"")
00f08d99dd7d ("KVM: nSVM: Sync next_rip field from vmcb12 to vmcb02")
9bd1f0efa859 ("KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault")
c3634d25fbee ("KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry")
1d5a1b5860ed ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running")
db663af4a001 ("kvm: x86: SVM: use vmcb* instead of svm->vmcb where it makes sense")
b9f3973ab3a8 ("KVM: x86: nSVM: implement nested VMLOAD/VMSAVE")
23e5092b6e2a ("KVM: SVM: Rename hook implementations to conform to kvm_x86_ops' names")
e27bc0440ebd ("KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor names")
068f7ea61895 ("KVM: SVM: improve split between svm_prepare_guest_switch and sev_es_prepare_guest_switch")
e1779c2714c3 ("KVM: x86: nSVM: fix potential NULL derefernce on nested migration")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6c41468c7c12d74843bb414fc00307ea8a6318c3 Mon Sep 17 00:00:00 2001
From: Sean Christopherson <seanjc(a)google.com>
Date: Wed, 22 Mar 2023 07:32:59 -0700
Subject: [PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM
exception injection
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable(a)vger.kernel.org
Cc: Maxim Levitsky <mlevitsk(a)redhat.com>
Signed-off-by: Sean Christopherson <seanjc(a)google.com>
Message-Id: <20230322143300.2209476-2-seanjc(a)google.com>
Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com>
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 45017576ad5e..7d6f98b7635f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9908,13 +9908,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu)
static void kvm_inject_exception(struct kvm_vcpu *vcpu)
{
+ /*
+ * Suppress the error code if the vCPU is in Real Mode, as Real Mode
+ * exceptions don't report error codes. The presence of an error code
+ * is carried with the exception and only stripped when the exception
+ * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do
+ * report an error code despite the CPU being in Real Mode.
+ */
+ vcpu->arch.exception.has_error_code &= is_protmode(vcpu);
+
trace_kvm_inj_exception(vcpu->arch.exception.vector,
vcpu->arch.exception.has_error_code,
vcpu->arch.exception.error_code,
vcpu->arch.exception.injected);
- if (vcpu->arch.exception.error_code && !is_protmode(vcpu))
- vcpu->arch.exception.error_code = false;
static_call(kvm_x86_inject_exception)(vcpu);
}
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d36f6ed761b53933b0b4126486c10d3da7751e7f Mon Sep 17 00:00:00 2001
From: Baokun Li <libaokun1(a)huawei.com>
Date: Wed, 18 May 2022 20:08:16 +0800
Subject: [PATCH] ext4: fix bug_on in __es_tree_search
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable(a)kernel.org
Fixes: 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci(a)huawei.com>
Signed-off-by: Baokun Li <libaokun1(a)huawei.com>
Reviewed-by: Jan Kara <jack(a)suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso(a)mit.edu>
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 474479ce76e0..c148bb97b527 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -372,7 +372,7 @@ static int ext4_valid_extent_entries(struct inode *inode,
{
unsigned short entries;
ext4_lblk_t lblock = 0;
- ext4_lblk_t prev = 0;
+ ext4_lblk_t cur = 0;
if (eh->eh_entries == 0)
return 1;
@@ -396,11 +396,11 @@ static int ext4_valid_extent_entries(struct inode *inode,
/* Check for overlapping extents */
lblock = le32_to_cpu(ext->ee_block);
- if ((lblock <= prev) && prev) {
+ if (lblock < cur) {
*pblk = ext4_ext_pblock(ext);
return 0;
}
- prev = lblock + ext4_ext_get_actual_len(ext) - 1;
+ cur = lblock + ext4_ext_get_actual_len(ext);
ext++;
entries--;
}
@@ -420,13 +420,13 @@ static int ext4_valid_extent_entries(struct inode *inode,
/* Check for overlapping index extents */
lblock = le32_to_cpu(ext_idx->ei_block);
- if ((lblock <= prev) && prev) {
+ if (lblock < cur) {
*pblk = ext4_idx_pblock(ext_idx);
return 0;
}
ext_idx++;
entries--;
- prev = lblock;
+ cur = lblock + 1;
}
}
return 1;
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 6c41468c7c12d74843bb414fc00307ea8a6318c3
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023041134-curvature-campsite-e51b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
6c41468c7c12 ("KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection")
d4963e319f1f ("KVM: x86: Make kvm_queued_exception a properly named, visible struct")
6ad75c5c99f7 ("KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception")
5623f751bd9c ("KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1)")
8d178f460772 ("KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like")
eba9799b5a6e ("KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS")
a61d7c5432ac ("KVM: x86: Trace re-injected exceptions")
6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
3741aec4c38f ("KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported")
cd9e6da8048c ("KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"")
00f08d99dd7d ("KVM: nSVM: Sync next_rip field from vmcb12 to vmcb02")
9bd1f0efa859 ("KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault")
c3634d25fbee ("KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry")
1d5a1b5860ed ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running")
db663af4a001 ("kvm: x86: SVM: use vmcb* instead of svm->vmcb where it makes sense")
b9f3973ab3a8 ("KVM: x86: nSVM: implement nested VMLOAD/VMSAVE")
23e5092b6e2a ("KVM: SVM: Rename hook implementations to conform to kvm_x86_ops' names")
e27bc0440ebd ("KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor names")
068f7ea61895 ("KVM: SVM: improve split between svm_prepare_guest_switch and sev_es_prepare_guest_switch")
e1779c2714c3 ("KVM: x86: nSVM: fix potential NULL derefernce on nested migration")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6c41468c7c12d74843bb414fc00307ea8a6318c3 Mon Sep 17 00:00:00 2001
From: Sean Christopherson <seanjc(a)google.com>
Date: Wed, 22 Mar 2023 07:32:59 -0700
Subject: [PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM
exception injection
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable(a)vger.kernel.org
Cc: Maxim Levitsky <mlevitsk(a)redhat.com>
Signed-off-by: Sean Christopherson <seanjc(a)google.com>
Message-Id: <20230322143300.2209476-2-seanjc(a)google.com>
Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com>
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 45017576ad5e..7d6f98b7635f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9908,13 +9908,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu)
static void kvm_inject_exception(struct kvm_vcpu *vcpu)
{
+ /*
+ * Suppress the error code if the vCPU is in Real Mode, as Real Mode
+ * exceptions don't report error codes. The presence of an error code
+ * is carried with the exception and only stripped when the exception
+ * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do
+ * report an error code despite the CPU being in Real Mode.
+ */
+ vcpu->arch.exception.has_error_code &= is_protmode(vcpu);
+
trace_kvm_inj_exception(vcpu->arch.exception.vector,
vcpu->arch.exception.has_error_code,
vcpu->arch.exception.error_code,
vcpu->arch.exception.injected);
- if (vcpu->arch.exception.error_code && !is_protmode(vcpu))
- vcpu->arch.exception.error_code = false;
static_call(kvm_x86_inject_exception)(vcpu);
}
xen kbdfront registers itself as being able to deliver *any* key since
it doesn't know what keys the backend may produce.
Unfortunately, the generated modalias gets too large and uevent creation
fails with -ENOMEM.
This can lead to gdm not using the keyboard since there is no seat
associated [1] and the debian installer crashing [2].
Trim the ranges of key capabilities by removing some BTN_* ranges.
While doing this, some neighboring undefined ranges are removed to trim
it further.
An upper limit of KEY_KBD_LCD_MENU5 is still too large. Use an upper
limit of KEY_BRIGHTNESS_MENU.
This removes:
BTN_DPAD_UP(0x220)..BTN_DPAD_RIGHT(0x223)
Empty space 0x224..0x229
Empty space 0x28a..0x28f
KEY_MACRO1(0x290)..KEY_MACRO30(0x2ad)
KEY_MACRO_RECORD_START 0x2b0
KEY_MACRO_RECORD_STOP 0x2b1
KEY_MACRO_PRESET_CYCLE 0x2b2
KEY_MACRO_PRESET1(0x2b3)..KEY_MACRO_PRESET3(0xb5)
Empty space 0x2b6..0x2b7
KEY_KBD_LCD_MENU1(0x2b8)..KEY_KBD_LCD_MENU5(0x2bc)
Empty space 0x2bd..0x2bf
BTN_TRIGGER_HAPPY(0x2c0)..BTN_TRIGGER_HAPPY40(0x2e7)
Empty space 0x2e8..0x2ff
The modalias shrinks from 2082 to 1550 bytes.
A chunk of keys need to be removed to allow the keyboard to be used.
This may break some functionality, but the hope is these macro keys are
uncommon and don't affect any users.
[1] https://github.com/systemd/systemd/issues/22944
[2] https://lore.kernel.org/xen-devel/87o8dw52jc.fsf@vps.thesusis.net/T/
Cc: Phillip Susi <phill(a)thesusis.net>
Cc: stable(a)vger.kernel.org
Signed-off-by: Jason Andryuk <jandryuk(a)gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek(a)baylibre.com>
---
v3:
Add Mattijs R-b
Put /* and */ on separate lines
---
drivers/input/misc/xen-kbdfront.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 67f1c7364c95..d59ba8f9852e 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -256,7 +256,16 @@ static int xenkbd_probe(struct xenbus_device *dev,
__set_bit(EV_KEY, kbd->evbit);
for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
__set_bit(i, kbd->keybit);
- for (i = KEY_OK; i < KEY_MAX; i++)
+ /*
+ * In theory we want to go KEY_OK..KEY_MAX, but that grows the
+ * modalias line too long. There is a gap of buttons from
+ * BTN_DPAD_UP..BTN_DPAD_RIGHT and KEY_ALS_TOGGLE is the next
+ * defined. Then continue up to KEY_BRIGHTNESS_MENU as an upper
+ * limit.
+ */
+ for (i = KEY_OK; i < BTN_DPAD_UP; i++)
+ __set_bit(i, kbd->keybit);
+ for (i = KEY_ALS_TOGGLE; i <= KEY_BRIGHTNESS_MENU; i++)
__set_bit(i, kbd->keybit);
ret = input_register_device(kbd);
--
2.41.0