November 2017 - Linux-stable-mirror

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -163,18 +163,17 @@ static const struct plat_sci_reg sci_reg }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-4.4/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: issue STARTLAN as first IPA command" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: issue STARTLAN as first IPA command to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-issue-startlan-as-first-ipa-command.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 12 Jan 2017 15:48:42 +0100 Subject: s390/qeth: issue STARTLAN as first IPA command From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 1034051045d125579ab1e8fcd5a724eeb0e70149 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht(a)linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 +++++++++++++++++---- drivers/s390/net/qeth_l2_main.c | 15 --------------- drivers/s390/net/qeth_l3_main.c | 15 --------------- 4 files changed, 17 insertions(+), 35 deletions(-) --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -909,7 +909,6 @@ void qeth_clear_thread_running_bit(struc int qeth_core_hardsetup_card(struct qeth_card *); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); -int qeth_send_startlan(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, int (*reply_cb) (struct qeth_card *, struct qeth_reply *, unsigned long), --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2955,7 +2955,7 @@ int qeth_send_ipa_cmd(struct qeth_card * } EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); -int qeth_send_startlan(struct qeth_card *card) +static int qeth_send_startlan(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -2968,7 +2968,6 @@ int qeth_send_startlan(struct qeth_card rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_startlan); static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -5080,6 +5079,20 @@ retriable: goto out; } + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + if (rc == IPA_RC_LAN_OFFLINE) { + dev_warn(&card->gdev->dev, + "The LAN is offline\n"); + card->lan_online = 0; + } else { + rc = -ENODEV; + goto out; + } + } else + card->lan_online = 1; + card->options.ipa4.supported_funcs = 0; card->options.ipa6.supported_funcs = 0; card->options.adp.supported_funcs = 0; @@ -5091,14 +5104,14 @@ retriable: if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { rc = qeth_query_setadapterparms(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); goto out; } } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "8err%d", rc); goto out; } } --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1203,21 +1203,6 @@ static int __qeth_l2_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || (card->info.type == QETH_CARD_TYPE_OSX)) { if (qeth_l2_start_ipassists(card)) --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3298,21 +3298,6 @@ static int __qeth_l3_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: rc = qeth_l3_setadapter_parms(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.4/s390-qeth-issue-startlan-as-first-ipa-command.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "PCI: mvebu: Handle changes to the bridge windows while enabled" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: mvebu: Handle changes to the bridge windows while enabled to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Date: Mon, 12 Dec 2016 11:30:20 -0700 Subject: PCI: mvebu: Handle changes to the bridge windows while enabled From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> [ Upstream commit d9bf28e2650fe3eeefed7e34841aea07d10c6543 ] The PCI core will write to the bridge window config multiple times while they are enabled. This can lead to mbus failures like this: mvebu_mbus: cannot add window '4:e8', conflicts with another window mvebu-pcie mbus:pex@e0000000: Could not create MBus window at [mem 0xe0000000-0xe00fffff]: -22 For me this is happening during a hotplug cycle. The PCI core is not changing the values, just writing them twice while active. The patch addresses the general case of any change to an active window, but not atomically. The code is slightly refactored so io and mem can share more of the window logic. Signed-off-by: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Jason Cooper <jason(a)lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/host/pci-mvebu.c | 101 +++++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 41 deletions(-) --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -131,6 +131,12 @@ struct mvebu_pcie { int nports; }; +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; @@ -148,10 +154,8 @@ struct mvebu_pcie_port { struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; - phys_addr_t memwin_base; - size_t memwin_size; - phys_addr_t iowin_base; - size_t iowin_size; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; u32 saved_pcie_stat; }; @@ -377,23 +381,45 @@ static void mvebu_pcie_add_windows(struc } } +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { - phys_addr_t iobase; + struct mvebu_pcie_window desired = {}; /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || port->bridge.iolimitupper < port->bridge.iobaseupper || !(port->bridge.command & PCI_COMMAND_IO)) { - - /* If a window was configured, remove it */ - if (port->iowin_base) { - mvebu_pcie_del_windows(port, port->iowin_base, - port->iowin_size); - port->iowin_base = 0; - port->iowin_size = 0; - } - + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); return; } @@ -410,32 +436,27 @@ static void mvebu_pcie_handle_iobase_cha * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ - iobase = ((port->bridge.iobase & 0xF0) << 8) | - (port->bridge.iobaseupper << 16); - port->iowin_base = port->pcie->io.start + iobase; - port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | - (port->bridge.iolimitupper << 16)) - - iobase) + 1; - - mvebu_pcie_add_windows(port, port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + /* Are the new membase/memlimit values invalid? */ if (port->bridge.memlimit < port->bridge.membase || !(port->bridge.command & PCI_COMMAND_MEMORY)) { - - /* If a window was configured, remove it */ - if (port->memwin_base) { - mvebu_pcie_del_windows(port, port->memwin_base, - port->memwin_size); - port->memwin_base = 0; - port->memwin_size = 0; - } - + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); return; } @@ -445,14 +466,12 @@ static void mvebu_pcie_handle_membase_ch * window to setup, according to the PCI-to-PCI bridge * specifications. */ - port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); - port->memwin_size = - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base + 1; - - mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size, - MVEBU_MBUS_NO_REMAP); + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); } /* Patches currently in stable-queue which might be from jgunthorpe(a)obsidianresearch.com are queue-4.4/pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "phy: increase size of MII_BUS_ID_SIZE and bus_id" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: increase size of MII_BUS_ID_SIZE and bus_id to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-increase-size-of-mii_bus_id_size-and-bus_id.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Date: Thu, 19 Jan 2017 17:05:04 +0100 Subject: phy: increase size of MII_BUS_ID_SIZE and bus_id From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> [ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Signed-off-by: Magnus Öberg <magnus.oberg(a)westermo.se> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/phy.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -136,11 +136,7 @@ static inline const char *phy_modes(phy_ /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -599,7 +595,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); Patches currently in stable-queue which might be from volodymyr.bendiuga(a)gmail.com are queue-4.4/phy-increase-size-of-mii_bus_id_size-and-bus_id.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netfilter-nft_meta-deal-with-packet_loopback-in-netdev-family.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Liping Zhang <zlpnobody(a)gmail.com> Date: Sat, 7 Jan 2017 21:33:55 +0800 Subject: netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family From: Liping Zhang <zlpnobody(a)gmail.com> [ Upstream commit f169fd695b192dd7b23aff8e69d25a1bc881bbfa ] After adding the following nft rule, then ping 224.0.0.1: # nft add rule netdev t c pkttype host counter The warning complain message will be printed out again and again: WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \ nft_meta_get_eval+0x3fe/0x460 [nft_meta] [...] Call Trace: <IRQ> dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 nft_meta_get_eval+0x3fe/0x460 [nft_meta] nft_do_chain+0xff/0x5e0 [nf_tables] So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4, convert it to PACKET_BROADCAST/MULTICAST according to the destination address's type; For ipv6, convert it to PACKET_MULTICAST directly. Signed-off-by: Liping Zhang <zlpnobody(a)gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netfilter/nft_meta.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -151,8 +151,34 @@ void nft_meta_get_eval(const struct nft_ else *dest = PACKET_BROADCAST; break; + case NFPROTO_NETDEV: + switch (skb->protocol) { + case htons(ETH_P_IP): { + int noff = skb_network_offset(skb); + struct iphdr *iph, _iph; + + iph = skb_header_pointer(skb, noff, + sizeof(_iph), &_iph); + if (!iph) + goto err; + + if (ipv4_is_multicast(iph->daddr)) + *dest = PACKET_MULTICAST; + else + *dest = PACKET_BROADCAST; + + break; + } + case htons(ETH_P_IPV6): + *dest = PACKET_MULTICAST; + break; + default: + WARN_ON_ONCE(1); + goto err; + } + break; default: - WARN_ON(1); + WARN_ON_ONCE(1); goto err; } break; Patches currently in stable-queue which might be from zlpnobody(a)gmail.com are queue-4.4/netfilter-nft_meta-deal-with-packet_loopback-in-netdev-family.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "net: dsa: select NET_SWITCHDEV" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: dsa: select NET_SWITCHDEV to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-dsa-select-net_switchdev.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> Date: Mon, 9 Jan 2017 16:49:26 -0500 Subject: net: dsa: select NET_SWITCHDEV From: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> [ Upstream commit 3a89eaa65db68bf53bf92dedc60084f810e1779a ] The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by: Vivien Didelot <vivien.didelot(a)savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Tested-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/dsa/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -1,12 +1,13 @@ config HAVE_NET_DSA def_bool y - depends on NETDEVICES && !S390 + depends on INET && NETDEVICES && !S390 # Drivers must select NET_DSA and the appropriate tagging format config NET_DSA tristate "Distributed Switch Architecture" - depends on HAVE_NET_DSA && NET_SWITCHDEV + depends on HAVE_NET_DSA + select NET_SWITCHDEV select PHYLIB ---help--- Say Y if you want to enable support for the hardware switches supported Patches currently in stable-queue which might be from vivien.didelot(a)savoirfairelinux.com are queue-4.4/net-dsa-select-net_switchdev.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "IPsec: do not ignore crypto err in ah4 input" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IPsec: do not ignore crypto err in ah4 input to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipsec-do-not-ignore-crypto-err-in-ah4-input.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Gilad Ben-Yossef <gilad(a)benyossef.com> Date: Mon, 16 Jan 2017 13:17:55 +0200 Subject: IPsec: do not ignore crypto err in ah4 input From: Gilad Ben-Yossef <gilad(a)benyossef.com> [ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ] ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ah4.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_ int ihl = ip_hdrlen(skb); int ah_hlen = (ah->hdrlen + 2) << 2; + if (err) + goto out; + work_iph = AH_SKB_CB(skb)->tmp; auth_data = ah_tmp_auth(work_iph, ihl); icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len); Patches currently in stable-queue which might be from gilad(a)benyossef.com are queue-4.4/ipsec-do-not-ignore-crypto-err-in-ah4-input.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Li Zhong <zhong(a)linux.vnet.ibm.com> Date: Fri, 11 Nov 2016 12:57:33 +0800 Subject: KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter From: Li Zhong <zhong(a)linux.vnet.ibm.com> [ Upstream commit 37451bc95dee0e666927d6ffdda302dbbaaae6fa ] Some counters are added in Commit 6e0365b78273 ("KVM: PPC: Book3S HV: Add ICP real mode counters"), to provide some performance statistics to determine whether further optimizing is needed for real mode functions. The n_reject counter counts how many times ICP rejects an irq because of priority in real mode. The redelivery of an lsi that is still asserted after eoi doesn't fall into this category, so the increasement there is removed. Also, it needs to be increased in icp_rm_deliver_irq() if it rejects another one. Signed-off-by: Li Zhong <zhong(a)linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus(a)ozlabs.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kvm/book3s_hv_rm_xics.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) --- a/arch/powerpc/kvm/book3s_hv_rm_xics.c +++ b/arch/powerpc/kvm/book3s_hv_rm_xics.c @@ -280,6 +280,7 @@ static void icp_rm_deliver_irq(struct kv */ if (reject && reject != XICS_IPI) { arch_spin_unlock(&ics->lock); + icp->n_reject++; new_irq = reject; goto again; } @@ -611,10 +612,8 @@ int kvmppc_rm_h_eoi(struct kvm_vcpu *vcp state = &ics->irq_state[src]; /* Still asserted, resend it */ - if (state->asserted) { - icp->n_reject++; + if (state->asserted) icp_rm_deliver_irq(xics, icp, irq); - } if (!hlist_empty(&vcpu->kvm->irq_ack_notifier_list)) { icp->rm_action |= XICS_RM_NOTIFY_EOI; Patches currently in stable-queue which might be from zhong(a)linux.vnet.ibm.com are queue-4.4/crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch queue-4.4/kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: mpr121 - handle multiple bits change of status register" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: mpr121 - handle multiple bits change of status register to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-mpr121-handle-multiple-bits-change-of-status-register.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Akinobu Mita <akinobu.mita(a)gmail.com> Date: Sun, 15 Jan 2017 14:44:30 -0800 Subject: Input: mpr121 - handle multiple bits change of status register From: Akinobu Mita <akinobu.mita(a)gmail.com> [ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ] This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita <akinobu.mita(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrup struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrup reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; Patches currently in stable-queue which might be from akinobu.mita(a)gmail.com are queue-4.4/input-mpr121-set-missing-event-capability.patch queue-4.4/input-mpr121-handle-multiple-bits-change-of-status-register.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "iommu/arm-smmu-v3: Clear prior settings when updating STEs" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/arm-smmu-v3: Clear prior settings when updating STEs to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-arm-smmu-v3-clear-prior-settings-when-updating-stes.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Nate Watterson <nwatters(a)codeaurora.org> Date: Tue, 20 Dec 2016 23:11:48 -0500 Subject: iommu/arm-smmu-v3: Clear prior settings when updating STEs From: Nate Watterson <nwatters(a)codeaurora.org> [ Upstream commit 810871c57011eb3e89e6768932757f169d666cd2 ] To prevent corruption of the stage-1 context pointer field when updating STEs, rebuild the entire containing dword instead of clearing individual fields. Signed-off-by: Nate Watterson <nwatters(a)codeaurora.org> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/arm-smmu-v3.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1033,13 +1033,8 @@ static void arm_smmu_write_strtab_ent(st } } - /* Nuke the existing Config, as we're going to rewrite it */ - val &= ~(STRTAB_STE_0_CFG_MASK << STRTAB_STE_0_CFG_SHIFT); - - if (ste->valid) - val |= STRTAB_STE_0_V; - else - val &= ~STRTAB_STE_0_V; + /* Nuke the existing STE_0 value, as we're going to rewrite it */ + val = ste->valid ? STRTAB_STE_0_V : 0; if (ste->bypass) { val |= disable_bypass ? STRTAB_STE_0_CFG_ABORT @@ -1068,7 +1063,6 @@ static void arm_smmu_write_strtab_ent(st val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK << STRTAB_STE_0_S1CTXPTR_SHIFT) | STRTAB_STE_0_CFG_S1_TRANS; - } if (ste->s2_cfg) { Patches currently in stable-queue which might be from nwatters(a)codeaurora.org are queue-4.4/iommu-arm-smmu-v3-clear-prior-settings-when-updating-stes.patch

7 years, 1 month

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2017