November 2017 - Linux-stable-mirror

[Linux-stable-mirror] [PATCH v2 01/10] staging: ccree: fix leak of import() after init()

by Gilad Ben-Yossef

crypto_ahash_import() may be called either after crypto_ahash_init() or without such call. Right now we always internally call init() as part of import(), thus leaking memory and mappings if the user has already called init() herself. Fix this by only calling init() internally if the state is not already initialized. Fixes: commit 454527d0d94f ("staging: ccree: fix hash import/export") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> --- drivers/staging/ccree/ssi_hash.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/staging/ccree/ssi_hash.c b/drivers/staging/ccree/ssi_hash.c index d79090e..1799d3f 100644 --- a/drivers/staging/ccree/ssi_hash.c +++ b/drivers/staging/ccree/ssi_hash.c @@ -1778,9 +1778,12 @@ static int ssi_ahash_import(struct ahash_request *req, const void *in) } in += sizeof(u32); - rc = ssi_hash_init(state, ctx); - if (rc) - goto out; + /* call init() to allocate bufs if the user hasn't */ + if (!state->digest_buff) { + rc = ssi_hash_init(state, ctx); + if (rc) + goto out; + } dma_sync_single_for_cpu(dev, state->digest_buff_dma_addr, ctx->inter_digestsize, DMA_BIDIRECTIONAL); -- 2.7.4

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 4.9

by Levin, Alexander (Sasha Levin)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.9 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit 5caae9d1419914177994363218616b869659e871: Linux 4.9.61 (2017-11-08 10:08:37 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-4.9-2 for you to fetch changes up to 815f1731f39d164ba279e7835bcb985588f5a8cd: net: dsa: select NET_SWITCHDEV (2017-11-08 15:34:46 -0500) - ---------------------------------------------------------------- Akinobu Mita (2): Input: mpr121 - handle multiple bits change of status register Input: mpr121 - set missing event capability Alexander Stein (1): pinctrl: baytrail: Fix debugfs offset output Alison Schofield (4): iio: trigger: free trigger resource correctly iio: pressure: ms5611: claim direct mode during oversampling changes iio: magnetometer: mag3110: claim direct mode during raw writes iio: proximity: sx9500: claim direct mode during raw proximity reads Bart Van Assche (1): IB/rxe: Fix reference leaks in memory key invalidation code Bjorn Andersson (1): wcn36xx: Don't use the destroyed hal_mutex David Lechner (2): dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO Feras Daoud (1): IB/ipoib: Change list_del to list_del_init in the tx object Frederic Weisbecker (1): sched/cputime, powerpc32: Fix stale scaled stime on context switch Gilad Ben-Yossef (1): IPsec: do not ignore crypto err in ah4 input Harninder Rai (1): dt-bindings: clockgen: Add compatible string for LS1012A Heiko Carstens (1): s390/topology: make "topology=off" parameter work Jason Gunthorpe (1): PCI: mvebu: Handle changes to the bridge windows while enabled John Johansen (1): apparmor: fix undefined reference to `aa_g_hash_policy' Juergen Gross (1): xen/netback: set default upper limit of tx/rx queues to 8 Julian Wiedmann (1): s390/qeth: issue STARTLAN as first IPA command Lars-Peter Clausen (1): [media] adv7604: Initialize drive strength to default when using DT Laurent Pinchart (1): serial: sh-sci: Fix register offsets for the IRDA serial port Li Zhong (2): KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter crypto: vmx - disable preemption to enable vsx in aes_ctr.c Liping Zhang (1): netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family Maciej W. Rozycki (1): video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Marcus Cooper (1): ASoC: sunxi: Add bindings for sun8i to SPDIF Marek Szyprowski (1): clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks Mihail Atanassov (1): drm: mali-dp: fix Lx_CONTROL register fields clobber Nate Watterson (1): iommu/arm-smmu-v3: Clear prior settings when updating STEs Noralf Trønnes (1): drm: drm_minor_register(): Clean up debugfs on failure Pan Bian (1): libertas: fix improper return value Patrice Chotard (1): ARM: dts: STiH410-family: fix wrong parent clock frequency Patrick Bruenn (1): ARM: dts: imx53-qsb-common: fix FEC pinmux config Peter Zijlstra (1): sched/core: Add missing update_rq_clock() call in sched_move_task() Rafał Miłecki (1): brcmfmac: setup wiphy bands after registering it first Stanislaw Gruszka (1): rt2800usb: mark tx failure on timeout Thomas Petazzoni (1): clk: mvebu: adjust AP806 CPU clock frequencies to production chip Tony Lindgren (1): ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Ursula Braun (1): s390/qeth: fix retrieval of vipa and proxy-arp addresses Vaibhav Jain (1): cxl: Force psl data-cache flush during device shutdown Valentin Longchamp (1): powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 Viresh Kumar (1): PM / OPP: Error out on failing to add static OPPs for v1 bindings Vivien Didelot (1): net: dsa: select NET_SWITCHDEV Volodymyr Bendiuga (1): phy: increase size of MII_BUS_ID_SIZE and bus_id Will Deacon (1): arm64: dma-mapping: Only swizzle DMA ops for IOMMU_DOMAIN_DMA William wu (1): usb: hcd: initialize hcd->flags to 0 when rm hcd Yazen Ghannam (2): EDAC, amd64: Add x86cpuid sanity check during init EDAC, amd64: Save and return err code from probe_one_instance() Documentation/devicetree/bindings/arm/davinci.txt | 4 + .../devicetree/bindings/clock/qoriq-clock.txt | 1 + .../bindings/sound/sunxi,sun4i-spdif.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++-- arch/arm/boot/dts/stih410.dtsi | 2 +- arch/arm/configs/omap2plus_defconfig | 1 + arch/arm64/mm/dma-mapping.c | 17 +++- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 + arch/powerpc/kernel/time.c | 1 + arch/powerpc/kvm/book3s_hv_rm_xics.c | 5 +- arch/s390/kernel/early.c | 12 +++ arch/s390/kernel/topology.c | 11 +-- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/base/power/opp/of.c | 12 ++- drivers/clk/mvebu/ap806-system-controller.c | 28 +++++- drivers/clk/samsung/clk-exynos5433.c | 6 +- drivers/crypto/vmx/aes_ctr.c | 6 ++ drivers/edac/amd64_edac.c | 12 ++- drivers/edac/amd64_edac.h | 1 + drivers/gpu/drm/arm/malidp_planes.c | 3 +- drivers/gpu/drm/drm_drv.c | 2 +- drivers/iio/magnetometer/mag3110.c | 30 ++++-- drivers/iio/pressure/ms5611_core.c | 12 ++- drivers/iio/proximity/sx9500.c | 10 +- drivers/iio/trigger/iio-trig-interrupt.c | 8 +- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/infiniband/sw/rxe/rxe_req.c | 1 + drivers/infiniband/sw/rxe/rxe_resp.c | 1 + drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/input/keyboard/mpr121_touchkey.c | 24 +++-- drivers/iommu/arm-smmu-v3.c | 10 +- drivers/media/i2c/adv7604.c | 3 + drivers/misc/cxl/pci.c | 3 + drivers/net/wireless/ath/wcn36xx/main.c | 3 +- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 9 +- drivers/net/wireless/marvell/libertas/cmd.c | 2 +- drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 5 +- drivers/net/xen-netback/netback.c | 6 +- drivers/pci/host/pci-mvebu.c | 101 ++++++++++++--------- drivers/pinctrl/intel/pinctrl-baytrail.c | 2 +- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 ++++- drivers/s390/net/qeth_l2_main.c | 15 --- drivers/s390/net/qeth_l3_main.c | 15 --- drivers/s390/net/qeth_l3_sys.c | 30 +++--- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 +- drivers/tty/serial/sh-sci.c | 17 ++-- drivers/usb/core/hcd.c | 1 + drivers/video/fbdev/pmag-ba-fb.c | 2 +- include/dt-bindings/clock/exynos5433.h | 5 +- include/linux/phy.h | 8 +- kernel/sched/core.c | 1 + net/dsa/Kconfig | 5 +- net/ipv4/ah4.c | 3 + net/netfilter/nft_meta.c | 28 +++++- security/apparmor/lsm.c | 2 +- 57 files changed, 333 insertions(+), 210 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaA2ziAAoJEN6mb/eXdyzcX88P/i2q+fayJnzyfAe5EfkYZu7H PCeA7jVGtb8qxWHIMyhz/zIIo53qfatEzC/5Py4/Elo72HF6Jvsxat8/0xsV/HiT fQK24hMYk5M0M50x6FzuQqy/VFlQdrZaHnz/dqoWR6KKZT+RD112usLRa2Y8d51Y /26UqXJIflr92GzmC0/SUWtjJ/4KJsQBHCB4pVdI4m1aCyftg9P18p8rWq5n2cVA t8/znc9PwCggo7JR+AJN+DC2YmnB1dJnuNd+ilqIjwmcwgR/cDRT907v0RWV0Q4M 6PxjxdrBZZGOhUWxu+XWhr1cdjfPDLPa1g1sOhkx+qYPxMXIdGO9N7bCPbyOGd1j KT0rSmeC/QyL4VeMzUPIpc+bkLMTmt98/oVwj2LLtEtIkQ/g3XWbqKKW8hJqSHoS NnJG/Ps+8EcuBbidn4BBbIpEPyONPbjFNTUjkpIeoTGDVgJ8FQtLsNRw9C96Pogs 1hXhYQu8sWvjMycqktBN8DtCm5a4DJnu5mwSd5DfKxQlBQ+EIdVGZQudCYkogR+v +Ylam6juiM8zCLVW1tdk5p0ufC0nxYISIokAH/udTx1exU64xa4xyc/qnjqeyWWd HaE+zQK7gucWSAnkb8LO/9T21RZD9DlZSRq8BD+GD5nmtxluzyvMBlb43FtL9ftk wHXTDFBvEAO/I6s6zBm6 =3q3p -----END PGP SIGNATURE-----

7 years, 1 month

2
1
0 0

[Linux-stable-mirror] Patch "xen/netback: set default upper limit of tx/rx queues to 8" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen/netback: set default upper limit of tx/rx queues to 8 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Juergen Gross <jgross(a)suse.com> Date: Tue, 10 Jan 2017 14:32:52 +0100 Subject: xen/netback: set default upper limit of tx/rx queues to 8 From: Juergen Gross <jgross(a)suse.com> [ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ] The default for the maximum number of tx/rx queues of one interface is the number of cpus of the system today. As each queue pair reserves 512 grant pages this default consumes a ridiculous number of grants for large guests. Limit the queue number to 8 as default. This value can be modified via a module parameter if required. Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/xen-netback/netback.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uin unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -1626,11 +1627,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", Patches currently in stable-queue which might be from jgross(a)suse.com are queue-4.9/xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "wcn36xx: Don't use the destroyed hal_mutex" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled wcn36xx: Don't use the destroyed hal_mutex to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: wcn36xx-don-t-use-the-destroyed-hal_mutex.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Bjorn Andersson <bjorn.andersson(a)linaro.org> Date: Wed, 11 Jan 2017 16:32:21 +0200 Subject: wcn36xx: Don't use the destroyed hal_mutex From: Bjorn Andersson <bjorn.andersson(a)linaro.org> [ Upstream commit d53628882255481b710641dd0118fbd80af6e983 ] ieee80211_unregister_hw() might invoke operations to stop the interface, that uses the hal_mutex. So don't destroy it until after we're done using it. Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/wcn36xx/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1165,11 +1165,12 @@ static int wcn36xx_remove(struct platfor wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n"); release_firmware(wcn->nv); - mutex_destroy(&wcn->hal_mutex); ieee80211_unregister_hw(hw); iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); + + mutex_destroy(&wcn->hal_mutex); ieee80211_free_hw(hw); return 0; Patches currently in stable-queue which might be from bjorn.andersson(a)linaro.org are queue-4.9/wcn36xx-don-t-use-the-destroyed-hal_mutex.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: pmag-ba-fb: Remove bad `__init' annotation" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: pmag-ba-fb: Remove bad `__init' annotation to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: "Maciej W. Rozycki" <macro(a)linux-mips.org> Date: Mon, 30 Jan 2017 17:39:48 +0100 Subject: video: fbdev: pmag-ba-fb: Remove bad `__init' annotation From: "Maciej W. Rozycki" <macro(a)linux-mips.org> [ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ] Fix: WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe() references the function __init pmagbafb_erase_cursor(). This is often because pmagbafb_probe lacks a __init annotation or the annotation of pmagbafb_erase_cursor is wrong. -- a fallout from a missed update from commit 9625b51350cc ("VIDEO: PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro(a)linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/pmag-ba-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; Patches currently in stable-queue which might be from macro(a)linux-mips.org are queue-4.9/video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "usb: hcd: initialize hcd->flags to 0 when rm hcd" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hcd: initialize hcd->flags to 0 when rm hcd to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: William wu <wulf(a)rock-chips.com> Date: Fri, 13 Jan 2017 11:04:22 +0800 Subject: usb: hcd: initialize hcd->flags to 0 when rm hcd From: William wu <wulf(a)rock-chips.com> [ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf(a)rock-chips.com> Acked-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -3023,6 +3023,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); Patches currently in stable-queue which might be from wulf(a)rock-chips.com are queue-4.9/usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -193,18 +193,17 @@ static const struct plat_sci_reg sci_reg }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-4.9/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "sched/cputime, powerpc32: Fix stale scaled stime on context switch" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/cputime, powerpc32: Fix stale scaled stime on context switch to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Frederic Weisbecker <fweisbec(a)gmail.com> Date: Thu, 5 Jan 2017 18:11:41 +0100 Subject: sched/cputime, powerpc32: Fix stale scaled stime on context switch From: Frederic Weisbecker <fweisbec(a)gmail.com> [ Upstream commit 90d08ba2b9b4be4aeca6a5b5a4b09fbcde30194d ] On context switch with powerpc32, the cputime is accumulated in the thread_info struct. So the switching-in task must move forward its start time snapshot to the current time in order to later compute the delta spent in system mode. This is what we do for the normal cputime by initializing the starttime field to the value of the previous task's starttime which got freshly updated. But we are missing the update of the scaled cputime start time. As a result we may be accounting too much scaled cputime later. Fix this by initializing the scaled cputime the same way we do for normal cputime. Signed-off-by: Frederic Weisbecker <fweisbec(a)gmail.com> Acked-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Christian Borntraeger <borntraeger(a)de.ibm.com> Cc: Fenghua Yu <fenghua.yu(a)intel.com> Cc: Heiko Carstens <heiko.carstens(a)de.ibm.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Paul Mackerras <paulus(a)samba.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Rik van Riel <riel(a)redhat.com> Cc: Stanislaw Gruszka <sgruszka(a)redhat.com> Cc: Tony Luck <tony.luck(a)intel.com> Cc: Wanpeng Li <wanpeng.li(a)hotmail.com> Link: http://lkml.kernel.org/r/1483636310-6557-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kernel/time.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -407,6 +407,7 @@ void arch_vtime_task_switch(struct task_ struct cpu_accounting_data *acct = get_accounting(current); acct->starttime = get_accounting(prev)->starttime; + acct->startspurr = get_accounting(prev)->startspurr; acct->system_time = 0; acct->user_time = 0; } Patches currently in stable-queue which might be from fweisbec(a)gmail.com are queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "sched/core: Add missing update_rq_clock() call in sched_move_task()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sched/core: Add missing update_rq_clock() call in sched_move_task() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sched-core-add-missing-update_rq_clock-call-in-sched_move_task.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Peter Zijlstra <peterz(a)infradead.org> Date: Mon, 23 Jan 2017 16:05:55 +0100 Subject: sched/core: Add missing update_rq_clock() call in sched_move_task() From: Peter Zijlstra <peterz(a)infradead.org> [ Upstream commit 1b1d62254df0fe42a711eb71948f915918987790 ] Bug was noticed via this warning: WARNING: CPU: 6 PID: 1 at kernel/sched/sched.h:804 detach_task_cfs_rq+0x8e8/0xb80 rq->clock_update_flags < RQCF_ACT_SKIP Modules linked in: CPU: 6 PID: 1 Comm: systemd Not tainted 4.10.0-rc5-00140-g0874170baf55-dirty #1 Hardware name: Supermicro SYS-4048B-TRFT/X10QBi, BIOS 1.0 04/11/2014 Call Trace: dump_stack+0x4d/0x65 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 detach_task_cfs_rq+0x8e8/0xb80 ? allocate_cgrp_cset_links+0x59/0x80 task_change_group_fair+0x27/0x150 sched_change_group+0x48/0xf0 sched_move_task+0x53/0x150 cpu_cgroup_attach+0x36/0x70 cgroup_taskset_migrate+0x175/0x300 cgroup_migrate+0xab/0xd0 cgroup_attach_task+0xf0/0x190 __cgroup_procs_write+0x1ed/0x2f0 cgroup_procs_write+0x14/0x20 cgroup_file_write+0x3f/0x100 kernfs_fop_write+0x104/0x180 __vfs_write+0x37/0x140 vfs_write+0xb8/0x1b0 SyS_write+0x55/0xc0 do_syscall_64+0x61/0x170 entry_SYSCALL64_slow_path+0x25/0x25 Reported-by: Ingo Molnar <mingo(a)kernel.org> Reported-by: Borislav Petkov <bp(a)alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Mike Galbraith <efault(a)gmx.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+) --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7961,6 +7961,7 @@ void sched_move_task(struct task_struct struct rq *rq; rq = task_rq_lock(tsk, &rf); + update_rq_clock(rq); running = task_current(rq, tsk); queued = task_on_rq_queued(tsk); Patches currently in stable-queue which might be from peterz(a)infradead.org are queue-4.9/sched-core-add-missing-update_rq_clock-call-in-sched_move_task.patch queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "s390/topology: make "topology=off" parameter work" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/topology: make "topology=off" parameter work to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-topology-make-topology-off-parameter-work.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Heiko Carstens <heiko.carstens(a)de.ibm.com> Date: Thu, 29 Dec 2016 13:52:52 +0100 Subject: s390/topology: make "topology=off" parameter work From: Heiko Carstens <heiko.carstens(a)de.ibm.com> [ Upstream commit 68cc795d1933285705ced6d841ef66c00ce98cbe ] The "topology=off" kernel parameter is supposed to prevent the kernel to use hardware topology information to generate scheduling domains etc. For an unknown reason I implemented this in a very odd way back then: instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the lowcore I added a second variable which indicated that topology information should not be used. This is more than suboptimal since it partially doesn't work. For the fake NUMA case topology information is still considered and scheduling domains will be created based on this. To fix this and to simplify the code get rid of the extra variable and implement the "topology=off" case like it is done for other features. Signed-off-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/s390/kernel/early.c | 12 ++++++++++++ arch/s390/kernel/topology.c | 11 ++--------- 2 files changed, 14 insertions(+), 9 deletions(-) --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -363,6 +363,18 @@ static inline void save_vector_registers #endif } +static int __init topology_setup(char *str) +{ + bool enabled; + int rc; + + rc = kstrtobool(str, &enabled); + if (!rc && !enabled) + S390_lowcore.machine_flags &= ~MACHINE_HAS_TOPOLOGY; + return rc; +} +early_param("topology", topology_setup); + static int __init disable_vector_extension(char *str) { S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX; --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -37,7 +37,6 @@ static void set_topology_timer(void); static void topology_work_fn(struct work_struct *work); static struct sysinfo_15_1_x *tl_info; -static bool topology_enabled = true; static DECLARE_WORK(topology_work, topology_work_fn); /* @@ -56,7 +55,7 @@ static cpumask_t cpu_group_map(struct ma cpumask_t mask; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; for (; info; info = info->next) { if (cpumask_test_cpu(cpu, &info->mask)) @@ -71,7 +70,7 @@ static cpumask_t cpu_thread_map(unsigned int i; cpumask_copy(&mask, cpumask_of(cpu)); - if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + if (!MACHINE_HAS_TOPOLOGY) return mask; cpu -= cpu % (smp_cpu_mtid + 1); for (i = 0; i <= smp_cpu_mtid; i++) @@ -413,12 +412,6 @@ static const struct cpumask *cpu_drawer_ return &per_cpu(cpu_topology, cpu).drawer_mask; } -static int __init early_parse_topology(char *p) -{ - return kstrtobool(p, &topology_enabled); -} -early_param("topology", early_parse_topology); - static struct sched_domain_topology_level s390_topology[] = { { cpu_thread_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, Patches currently in stable-queue which might be from heiko.carstens(a)de.ibm.com are queue-4.9/s390-topology-make-topology-off-parameter-work.patch queue-4.9/sched-cputime-powerpc32-fix-stale-scaled-stime-on-context-switch.patch

7 years, 1 month

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2017