December 2017 - Linux-stable-mirror

[Linux-stable-mirror] [PATCH 1/2] x86/dumpstack: Fix partial register dumps

by Josh Poimboeuf

The show_regs_safe() logic is wrong. When there's an iret stack frame, it prints the entire pt_regs -- most of which is random stack data -- instead of just the five registers at the end. show_regs_safe() is also poorly named: the on_stack() checks aren't for safety. Rename the function to show_regs_if_on_stack() and add a comment to explain why the checks are needed. These issues were introduced with the "partial register dump" feature of the following commit: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully") That patch had gone through a few iterations of development, and the above issues were artifacts from a previous iteration of the patch where 'regs' pointed directly to the iret frame rather than to the (partially empty) pt_regs. Tested-by: Alexander Tsoy <alexander(a)tsoy.me> Fixes: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully") Cc: stable(a)vger.kernel.org Signed-off-by: Josh Poimboeuf <jpoimboe(a)redhat.com> --- arch/x86/include/asm/unwind.h | 17 +++++++++++++---- arch/x86/kernel/dumpstack.c | 28 ++++++++++++++++++++-------- arch/x86/kernel/stacktrace.c | 2 +- 3 files changed, 34 insertions(+), 13 deletions(-) diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h index c1688c2d0a12..1f86e1b0a5cd 100644 --- a/arch/x86/include/asm/unwind.h +++ b/arch/x86/include/asm/unwind.h @@ -56,18 +56,27 @@ void unwind_start(struct unwind_state *state, struct task_struct *task, #if defined(CONFIG_UNWINDER_ORC) || defined(CONFIG_UNWINDER_FRAME_POINTER) /* - * WARNING: The entire pt_regs may not be safe to dereference. In some cases, - * only the iret frame registers are accessible. Use with caution! + * If 'partial' returns true, only the iret frame registers are valid. */ -static inline struct pt_regs *unwind_get_entry_regs(struct unwind_state *state) +static inline struct pt_regs *unwind_get_entry_regs(struct unwind_state *state, + bool *partial) { if (unwind_done(state)) return NULL; + if (partial) { +#ifdef CONFIG_UNWINDER_ORC + *partial = !state->full_regs; +#else + *partial = false; +#endif + } + return state->regs; } #else -static inline struct pt_regs *unwind_get_entry_regs(struct unwind_state *state) +static inline struct pt_regs *unwind_get_entry_regs(struct unwind_state *state, + bool *partial) { return NULL; } diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 36b17e0febe8..e4c2c73bd99e 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -76,12 +76,23 @@ void show_iret_regs(struct pt_regs *regs) regs->sp, regs->flags); } -static void show_regs_safe(struct stack_info *info, struct pt_regs *regs) +static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs, + bool partial) { - if (on_stack(info, regs, sizeof(*regs))) + /* + * These on_stack() checks aren't strictly necessary: the unwind code + * has already validated the 'regs' pointer. The checks are done for + * ordering reasons: if the registers are on the next stack, we don't + * want to print them out yet. Otherwise they'll be shown as part of + * the wrong stack. Later, when show_trace_log_lvl() switches to the + * next stack, this function will be called again with the same regs so + * they can be printed in the right context. + */ + if (!partial && on_stack(info, regs, sizeof(*regs))) { __show_regs(regs, 0); - else if (on_stack(info, (void *)regs + IRET_FRAME_OFFSET, - IRET_FRAME_SIZE)) { + + } else if (partial && on_stack(info, (void *)regs + IRET_FRAME_OFFSET, + IRET_FRAME_SIZE)) { /* * When an interrupt or exception occurs in entry code, the * full pt_regs might not have been saved yet. In that case @@ -98,6 +109,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, struct stack_info stack_info = {0}; unsigned long visit_mask = 0; int graph_idx = 0; + bool partial; printk("%sCall Trace:\n", log_lvl); @@ -140,7 +152,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, printk("%s <%s>\n", log_lvl, stack_name); if (regs) - show_regs_safe(&stack_info, regs); + show_regs_if_on_stack(&stack_info, regs, partial); /* * Scan the stack, printing any text addresses we find. At the @@ -164,7 +176,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, /* * Don't print regs->ip again if it was already printed - * by show_regs_safe() below. + * by show_regs_if_on_stack(). */ if (regs && stack == &regs->ip) goto next; @@ -199,9 +211,9 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, unwind_next_frame(&state); /* if the frame has entry regs, print them */ - regs = unwind_get_entry_regs(&state); + regs = unwind_get_entry_regs(&state, &partial); if (regs) - show_regs_safe(&stack_info, regs); + show_regs_if_on_stack(&stack_info, regs, partial); } if (stack_name) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 77835bc021c7..7dd0d2a0d142 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -102,7 +102,7 @@ __save_stack_trace_reliable(struct stack_trace *trace, for (unwind_start(&state, task, NULL, NULL); !unwind_done(&state); unwind_next_frame(&state)) { - regs = unwind_get_entry_regs(&state); + regs = unwind_get_entry_regs(&state, NULL); if (regs) { /* * Kernel mode registers on the stack indicate an -- 2.13.6

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "sync objtool's copy of x86-opcode-map.txt" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sync objtool's copy of x86-opcode-map.txt to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sync-objtool-s-copy-of-x86-opcode-map.txt.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 14:13:42 CET 2017 Date: Sun, 31 Dec 2017 14:13:42 +0100 To: Greg KH <gregkh(a)linuxfoundation.org> From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Subject: sync objtool's copy of x86-opcode-map.txt When building objtool, we get the warning: warning: objtool: x86 instruction decoder differs from kernel That's due to commit 2816c0455cea088f07a210f8a00701a82a78aa9c which was commit 12a78d43de767eaf8fb272facb7a7b6f2dc6a9df upstream that modified arch/x86/lib/x86-opcode-map.txt without also updating the objtool copy. The objtool copy was updated in a much larger patch upstream, but we don't need all of that here, so just update the single file. If this gets too annoying, I'll just end up doing what we did for 4.14 and backport the whole series to keep this from happening again, but as this seems to be rare in the 4.9-stable series, this single patch should be fine. Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: H. Peter Anvin <hpa(a)zytor.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/objtool/arch/x86/insn/x86-opcode-map.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/objtool/arch/x86/insn/x86-opcode-map.txt +++ b/tools/objtool/arch/x86/insn/x86-opcode-map.txt @@ -896,7 +896,7 @@ EndTable GrpTable: Grp3_1 0: TEST Eb,Ib -1: +1: TEST Eb,Ib 2: NOT Eb 3: NEG Eb 4: MUL AL,Eb Patches currently in stable-queue which might be from gregkh(a)linuxfoundation.org are queue-4.9/asoc-tlv320aic31xx-fix-gpio1-register-definition.patch queue-4.9/net-mlx5-fix-rate-limit-packet-pacing-naming-and-struct.patch queue-4.9/net-igmp-use-correct-source-address-on-igmpv3-reports.patch queue-4.9/asoc-fsl_ssi-ac-97-ops-need-regmap-clock-and-cleaning-up-on-failure.patch queue-4.9/x86-vm86-32-switch-to-flush_tlb_mm_range-in-mark_screen_rdonly.patch queue-4.9/asoc-twl4030-fix-child-node-lookup.patch queue-4.9/x86-mm-add-the-nopcid-boot-option-to-turn-off-pcid.patch queue-4.9/asoc-wm_adsp-fix-validation-of-firmware-and-coeff-lengths.patch queue-4.9/net-fix-double-free-and-memory-corruption-in-get_net_ns_by_id.patch queue-4.9/adding-missing-rcu_read_unlock-in-ipxip6_rcv.patch queue-4.9/net-reevalulate-autoflowlabel-setting-after-sysctl-setting.patch queue-4.9/sock-free-skb-in-skb_complete_tx_timestamp-on-error.patch queue-4.9/alsa-hda-drop-useless-warn_on.patch queue-4.9/s390-qeth-lock-ip-table-while-applying-takeover-changes.patch queue-4.9/net-qmi_wwan-add-sierra-em7565-1199-9091.patch queue-4.9/net-bridge-fix-early-call-to-br_stp_change_bridge_id-and-plug-newlink-leaks.patch queue-4.9/ptr_ring-add-barriers.patch queue-4.9/net-mlx5e-fix-possible-deadlock-of-vxlan-lock.patch queue-4.9/x86-mm-enable-cr4.pcide-on-supported-systems.patch queue-4.9/net-mvmdio-disable-unprepare-clocks-in-eprobe_defer-case.patch queue-4.9/net-mlx5e-prevent-possible-races-in-vxlan-control-flow.patch queue-4.9/net-fec-unmap-the-xmit-buffer-that-are-not-transferred-by-dma.patch queue-4.9/netlink-add-netns-check-on-taps.patch queue-4.9/tcp-invalidate-rate-samples-during-sack-reneging.patch queue-4.9/sync-objtool-s-copy-of-x86-opcode-map.txt.patch queue-4.9/alsa-hda-fix-headset-mic-detection-issue-on-a-dell-machine.patch queue-4.9/s390-qeth-apply-takeover-changes-when-mode-is-toggled.patch queue-4.9/tcp-md5sig-use-skb-s-saddr-when-replying-to-an-incoming-segment.patch queue-4.9/net-phy-micrel-ksz9031-reconfigure-autoneg-after-phy-autoneg-workaround.patch queue-4.9/tracing-fix-crash-when-it-fails-to-alloc-ring-buffer.patch queue-4.9/tg3-fix-rx-hang-on-mtu-change-with-5717-5719.patch queue-4.9/s390-qeth-update-takeover-ips-after-configuration-change.patch queue-4.9/tracing-remove-extra-zeroing-out-of-the-ring-buffer-page.patch queue-4.9/x86-mm-remove-the-up-asm-tlbflush.h-code-always-use-the-formerly-smp-code.patch queue-4.9/net-fec-allow-reception-of-frames-bigger-than-1522-bytes.patch queue-4.9/net-ipv4-fix-for-a-race-condition-in-raw_sendmsg.patch queue-4.9/kbuild-add-fno-stack-check-to-kernel-build-options.patch queue-4.9/x86-mm-reimplement-flush_tlb_page-using-flush_tlb_mm_range.patch queue-4.9/x86-mm-make-flush_tlb_mm_range-more-predictable.patch queue-4.9/ipv4-fix-use-after-free-when-flushing-fib-tables.patch queue-4.9/x86-mm-remove-flush_tlb-and-flush_tlb_current_task.patch queue-4.9/rds-check-cmsg_len-before-dereferencing-cmsg_data.patch queue-4.9/net-mlx5-fix-error-flow-in-create_qp-command.patch queue-4.9/ipv4-igmp-guard-against-silly-mtu-values.patch queue-4.9/ring-buffer-mask-out-the-info-bits-when-returning-buffer-page-length.patch queue-4.9/net-mlx5e-add-refcount-to-vxlan-structure.patch queue-4.9/x86-mm-disable-pcid-on-32-bit-kernels.patch queue-4.9/x86-mm-64-fix-reboot-interaction-with-cr4.pcide.patch queue-4.9/s390-qeth-don-t-apply-takeover-changes-to-rxip.patch queue-4.9/tcp_bbr-record-full-bw-reached-decision-in-new-full_bw_reached-bit.patch queue-4.9/iw_cxgb4-only-validate-the-msn-for-successful-completions.patch queue-4.9/asoc-da7218-fix-fix-child-node-lookup.patch queue-4.9/sctp-replace-use-of-sockets_allocated-with-specified-macro.patch queue-4.9/ipv6-mcast-better-catch-silly-mtu-values.patch queue-4.9/net-mlx5e-fix-features-check-of-ipv6-traffic.patch queue-4.9/tracing-fix-possible-double-free-on-failure-of-allocating-trace-buffer.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "tcp md5sig: Use skb's saddr when replying to an incoming segment" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp md5sig: Use skb's saddr when replying to an incoming segment to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-md5sig-use-skb-s-saddr-when-replying-to-an-incoming-segment.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Christoph Paasch <cpaasch(a)apple.com> Date: Mon, 11 Dec 2017 00:05:46 -0800 Subject: tcp md5sig: Use skb's saddr when replying to an incoming segment From: Christoph Paasch <cpaasch(a)apple.com> [ Upstream commit 30791ac41927ebd3e75486f9504b6d2280463bf0 ] The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f9722922 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by: Christoph Paasch <cpaasch(a)apple.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/tcp_ipv4.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -823,7 +823,7 @@ static void tcp_v4_reqsk_send_ack(const tcp_time_stamp, req->ts_recent, 0, - tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&ip_hdr(skb)->daddr, + tcp_md5_do_lookup(sk, (union tcp_md5_addr *)&ip_hdr(skb)->saddr, AF_INET), inet_rsk(req)->no_srccheck ? IP_REPLY_ARG_NOSRCCHECK : 0, ip_hdr(skb)->tos); --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -949,7 +949,7 @@ static void tcp_v6_reqsk_send_ack(const tcp_rsk(req)->rcv_nxt, req->rsk_rcv_wnd >> inet_rsk(req)->rcv_wscale, tcp_time_stamp, req->ts_recent, sk->sk_bound_dev_if, - tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr), + tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->saddr), 0, 0); } Patches currently in stable-queue which might be from cpaasch(a)apple.com are queue-4.4/tcp-md5sig-use-skb-s-saddr-when-replying-to-an-incoming-segment.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "tg3: Fix rx hang on MTU change with 5717/5719" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tg3: Fix rx hang on MTU change with 5717/5719 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tg3-fix-rx-hang-on-mtu-change-with-5717-5719.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Brian King <brking(a)linux.vnet.ibm.com> Date: Fri, 15 Dec 2017 15:21:50 -0600 Subject: tg3: Fix rx hang on MTU change with 5717/5719 From: Brian King <brking(a)linux.vnet.ibm.com> [ Upstream commit 748a240c589824e9121befb1cba5341c319885bc ] This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14228,7 +14228,9 @@ static int tg3_change_mtu(struct net_dev /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ - if (tg3_asic_rev(tp) == ASIC_REV_57766) + if (tg3_asic_rev(tp) == ASIC_REV_57766 || + tg3_asic_rev(tp) == ASIC_REV_5717 || + tg3_asic_rev(tp) == ASIC_REV_5719) reset_phy = true; err = tg3_restart_hw(tp, reset_phy); Patches currently in stable-queue which might be from brking(a)linux.vnet.ibm.com are queue-4.4/tg3-fix-rx-hang-on-mtu-change-with-5717-5719.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "sctp: Replace use of sockets_allocated with specified macro." has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sctp: Replace use of sockets_allocated with specified macro. to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sctp-replace-use-of-sockets_allocated-with-specified-macro.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Tonghao Zhang <xiangxia.m.yue(a)gmail.com> Date: Fri, 22 Dec 2017 10:15:20 -0800 Subject: sctp: Replace use of sockets_allocated with specified macro. From: Tonghao Zhang <xiangxia.m.yue(a)gmail.com> [ Upstream commit 8cb38a602478e9f806571f6920b0a3298aabf042 ] The patch(180d8cd942ce) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd942ce ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer(a)parallels.com> Signed-off-by: Tonghao Zhang <zhangtonghao(a)didichuxing.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sctp/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4153,7 +4153,7 @@ static int sctp_init_sock(struct sock *s SCTP_DBG_OBJCNT_INC(sock); local_bh_disable(); - percpu_counter_inc(&sctp_sockets_allocated); + sk_sockets_allocated_inc(sk); sock_prot_inuse_add(net, sk->sk_prot, 1); /* Nothing can fail after this block, otherwise @@ -4197,7 +4197,7 @@ static void sctp_destroy_sock(struct soc } sctp_endpoint_free(sp->ep); local_bh_disable(); - percpu_counter_dec(&sctp_sockets_allocated); + sk_sockets_allocated_dec(sk); sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1); local_bh_enable(); } Patches currently in stable-queue which might be from xiangxia.m.yue(a)gmail.com are queue-4.4/sctp-replace-use-of-sockets_allocated-with-specified-macro.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "sock: free skb in skb_complete_tx_timestamp on error" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sock: free skb in skb_complete_tx_timestamp on error to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sock-free-skb-in-skb_complete_tx_timestamp-on-error.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Willem de Bruijn <willemb(a)google.com> Date: Wed, 13 Dec 2017 14:41:06 -0500 Subject: sock: free skb in skb_complete_tx_timestamp on error From: Willem de Bruijn <willemb(a)google.com> [ Upstream commit 35b99dffc3f710cafceee6c8c6ac6a98eb2cb4bf ] skb_complete_tx_timestamp must ingest the skb it is passed. Call kfree_skb if the skb cannot be enqueued. Fixes: b245be1f4db1 ("net-timestamp: no-payload only sysctl") Fixes: 9ac25fc06375 ("net: fix socket refcounting in skb_complete_tx_timestamp()") Reported-by: Richard Cochran <richardcochran(a)gmail.com> Signed-off-by: Willem de Bruijn <willemb(a)google.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/skbuff.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3676,7 +3676,7 @@ void skb_complete_tx_timestamp(struct sk struct sock *sk = skb->sk; if (!skb_may_tx_timestamp(sk, false)) - return; + goto err; /* Take a reference to prevent skb_orphan() from freeing the socket, * but only if the socket refcount is not zero. @@ -3685,7 +3685,11 @@ void skb_complete_tx_timestamp(struct sk *skb_hwtstamps(skb) = *hwtstamps; __skb_complete_tx_timestamp(skb, sk, SCM_TSTAMP_SND); sock_put(sk); + return; } + +err: + kfree_skb(skb); } EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp); Patches currently in stable-queue which might be from willemb(a)google.com are queue-4.4/sock-free-skb-in-skb_complete_tx_timestamp-on-error.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "net: reevalulate autoflowlabel setting after sysctl setting" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: reevalulate autoflowlabel setting after sysctl setting to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-reevalulate-autoflowlabel-setting-after-sysctl-setting.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Shaohua Li <shli(a)fb.com> Date: Wed, 20 Dec 2017 12:10:21 -0800 Subject: net: reevalulate autoflowlabel setting after sysctl setting From: Shaohua Li <shli(a)fb.com> [ Upstream commit 513674b5a2c9c7a67501506419da5c3c77ac6f08 ] sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai(a)fb.com> Cc: Eric Dumazet <eric.dumazet(a)gmail.com> Cc: Tom Herbert <tom(a)quantonium.net> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/ipv6.h | 3 ++- net/ipv6/af_inet6.c | 1 - net/ipv6/ip6_output.c | 12 ++++++++++-- net/ipv6/ipv6_sockglue.c | 1 + 4 files changed, 13 insertions(+), 4 deletions(-) --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -215,7 +215,8 @@ struct ipv6_pinfo { * 100: prefer care-of address */ dontfrag:1, - autoflowlabel:1; + autoflowlabel:1, + autoflowlabel_set:1; __u8 min_hopcount; __u8 tclass; __be32 rcv_flowinfo; --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -200,7 +200,6 @@ lookup_protocol: np->mcast_hops = IPV6_DEFAULT_MCASTHOPS; np->mc_loop = 1; np->pmtudisc = IPV6_PMTUDISC_WANT; - np->autoflowlabel = ip6_default_np_autolabel(sock_net(sk)); sk->sk_ipv6only = net->ipv6.sysctl.bindv6only; /* Init the ipv4 part of the socket since we can have sockets --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -148,6 +148,14 @@ int ip6_output(struct net *net, struct s !(IP6CB(skb)->flags & IP6SKB_REROUTED)); } +static bool ip6_autoflowlabel(struct net *net, const struct ipv6_pinfo *np) +{ + if (!np->autoflowlabel_set) + return ip6_default_np_autolabel(net); + else + return np->autoflowlabel; +} + /* * xmit an sk_buff (used by TCP, SCTP and DCCP) * Note : socket lock is not held for SYNACK packets, but might be modified @@ -211,7 +219,7 @@ int ip6_xmit(const struct sock *sk, stru hlimit = ip6_dst_hoplimit(dst); ip6_flow_hdr(hdr, tclass, ip6_make_flowlabel(net, skb, fl6->flowlabel, - np->autoflowlabel, fl6)); + ip6_autoflowlabel(net, np), fl6)); hdr->payload_len = htons(seg_len); hdr->nexthdr = proto; @@ -1675,7 +1683,7 @@ struct sk_buff *__ip6_make_skb(struct so ip6_flow_hdr(hdr, v6_cork->tclass, ip6_make_flowlabel(net, skb, fl6->flowlabel, - np->autoflowlabel, fl6)); + ip6_autoflowlabel(net, np), fl6)); hdr->hop_limit = v6_cork->hop_limit; hdr->nexthdr = proto; hdr->saddr = fl6->saddr; --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -872,6 +872,7 @@ pref_skip_coa: break; case IPV6_AUTOFLOWLABEL: np->autoflowlabel = valbool; + np->autoflowlabel_set = 1; retv = 0; break; } Patches currently in stable-queue which might be from shli(a)fb.com are queue-4.4/net-reevalulate-autoflowlabel-setting-after-sysctl-setting.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "netlink: Add netns check on taps" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netlink: Add netns check on taps to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netlink-add-netns-check-on-taps.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Kevin Cernekee <cernekee(a)chromium.org> Date: Wed, 6 Dec 2017 12:12:27 -0800 Subject: netlink: Add netns check on taps From: Kevin Cernekee <cernekee(a)chromium.org> [ Upstream commit 93c647643b48f0131f02e45da3bd367d80443291 ] Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by: Kevin Cernekee <cernekee(a)chromium.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netlink/af_netlink.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -261,6 +261,9 @@ static int __netlink_deliver_tap_skb(str struct sock *sk = skb->sk; int ret = -ENOMEM; + if (!net_eq(dev_net(dev), sock_net(sk))) + return 0; + dev_hold(dev); if (is_vmalloc_addr(skb->head)) Patches currently in stable-queue which might be from cernekee(a)chromium.org are queue-4.4/net-igmp-use-correct-source-address-on-igmpv3-reports.patch queue-4.4/netlink-add-netns-check-on-taps.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "net: qmi_wwan: add Sierra EM7565 1199:9091" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: qmi_wwan: add Sierra EM7565 1199:9091 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-qmi_wwan-add-sierra-em7565-1199-9091.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Sebastian Sjoholm <ssjoholm(a)mac.com> Date: Mon, 11 Dec 2017 21:51:14 +0100 Subject: net: qmi_wwan: add Sierra EM7565 1199:9091 From: Sebastian Sjoholm <ssjoholm(a)mac.com> [ Upstream commit aceef61ee56898cfa7b6960fb60b9326c3860441 ] Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by: Sebastian Sjoholm <ssjoholm(a)mac.com> Acked-by: Bjørn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -737,6 +737,7 @@ static const struct usb_device_id produc {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */ + {QMI_FIXED_INTF(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ Patches currently in stable-queue which might be from ssjoholm(a)mac.com are queue-4.4/net-qmi_wwan-add-sierra-em7565-1199-9091.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-micrel-ksz9031-reconfigure-autoneg-after-phy-autoneg-workaround.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Sun Dec 31 11:20:35 CET 2017 From: Grygorii Strashko <grygorii.strashko(a)ti.com> Date: Wed, 20 Dec 2017 18:45:10 -0600 Subject: net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround From: Grygorii Strashko <grygorii.strashko(a)ti.com> [ Upstream commit c1a8d0a3accf64a014d605e6806ce05d1c17adf1 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -541,6 +541,7 @@ static int ksz9031_read_status(struct ph phydev->link = 0; if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) phydev->drv->config_intr(phydev); + return genphy_config_aneg(phydev); } return 0; Patches currently in stable-queue which might be from grygorii.strashko(a)ti.com are queue-4.4/net-phy-micrel-ksz9031-reconfigure-autoneg-after-phy-autoneg-workaround.patch

6 years, 11 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2017