Touch toggle softkeys send a '1' while pressed and a '0' while released,
requring the kernel to keep track of wether touch should be enabled or
disabled. The code does not handle the state transitions properly,
however. If the key is pressed repeatedly, the following four states
of states are cycled through (assuming touch starts out enabled):
Press: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Release: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1
Press: shared->is_touch_on => 1, SW_MUTE_DEVICE => 0
Release: shared->is_touch_on => 1, SW_MUTE_DEVICE => 1
The hardware always properly enables/disables touch when the key is
pressed but applications that listen for SW_MUTE_DEVICE events to provide
feedback about the state will only ever show touch as being enabled while
the key is held, and only every-other time. This sequence occurs because
the fallthrough WACOM_HID_WD_TOUCHONOFF case is always handled, and it
uses the value of the *local* is_touch_on variable as the value to
report to userspace. The local value is equal to the shared value when
the button is pressed, but equal to zero when the button is released.
Reporting the shared value to userspace fixes this problem, but the
fallthrough case needs to update the shared value in an incompatible
way (which is why the local variable was introduced in the first place).
To work around this, we just handle both cases in a single block of code
and update the shared variable as appropriate.
Fixes: d793ff8187 ("HID: wacom: generic: support touch on/off softkey")
Cc: <stable(a)vger.kernel.org> # v4.12+
Signed-off-by: Jason Gerecke <jason.gerecke(a)wacom.com>
Reviewed-by: Aaron Skomra <aaron.skomra(a)wacom.com>
Tested-by: Aaron Skomra <aaron.skomra(a)wacom.com>
---
drivers/hid/wacom_wac.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 16af6886e828..7dbff253c05c 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1924,7 +1924,6 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
struct wacom_features *features = &wacom_wac->features;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
int i;
- bool is_touch_on = value;
bool do_report = false;
/*
@@ -1969,16 +1968,17 @@ static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field
break;
case WACOM_HID_WD_MUTE_DEVICE:
- if (wacom_wac->shared->touch_input && value) {
- wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
- is_touch_on = wacom_wac->shared->is_touch_on;
- }
-
- /* fall through*/
case WACOM_HID_WD_TOUCHONOFF:
if (wacom_wac->shared->touch_input) {
+ bool *is_touch_on = &wacom_wac->shared->is_touch_on;
+
+ if (equivalent_usage == WACOM_HID_WD_MUTE_DEVICE && value)
+ *is_touch_on = !(*is_touch_on);
+ else if (equivalent_usage == WACOM_HID_WD_TOUCHONOFF)
+ *is_touch_on = value;
+
input_report_switch(wacom_wac->shared->touch_input,
- SW_MUTE_DEVICE, !is_touch_on);
+ SW_MUTE_DEVICE, !(*is_touch_on));
input_sync(wacom_wac->shared->touch_input);
}
break;
--
2.15.1
Background: ExpressKey Remotes communicate their events via usb dongle.
Each dongle can hold up to 5 pairings at one time and one EKR (identified
by its serial number) can unfortunately be paired with its dongle
more than once. The pairing takes place in a round-robin fashion.
Input devices are only created once per EKR, when a new serial number
is seen in the list of pairings. However, if a device is created for
a "higher" paring index and subsequently a second pairing occurs at a
lower pairing index, unpairing the remote with that serial number from
any pairing index will currently cause a driver crash. This occurs
infrequently, as two remotes are necessary to trigger this bug and most
users have only one remote.
As an illustration, to trigger the bug you need to have two remotes,
and pair them in this order:
1. slot 0 -> remote 1 (input device created for remote 1)
2. slot 1 -> remote 1 (duplicate pairing - no device created)
3. slot 2 -> remote 1 (duplicate pairing - no device created)
4. slot 3 -> remote 1 (duplicate pairing - no device created)
5. slot 4 -> remote 2 (input device created for remote 2)
6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1)
7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2)
8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3)
9. slot 3 -> remote 2 (1 destroyed and not recreated)
10. slot 4 -> remote 2 (2 was already in this slot so no changes)
11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in
one of the dongle slots it occupied and attempts
to remove all information about remote 2 [1]. It
calls wacom_remote_destroy_one for remote 2, but
the destroy function assumes the lowest index is
where the remote's input device was created. The
code "cleans up" the other remote 2 pairings
including the one which the input device was based
on, assuming they were were just duplicate
pairings. However, the cleanup doesn't call the
devres release function for the input device that
was created in slot 4).
This issue is fixed by this commit.
[1] Remote 2 should subsequently be re-created on the next packet from the
EKR at the lowest numbered slot that it occupies (here slot 1).
Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources")
Cc: stable <stable(a)vger.kernel.org> #4.9
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra(a)wacom.com>
---
drivers/hid/wacom_sys.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index ee71ad9b6cc1..76531796bd3c 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2347,23 +2347,23 @@ static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
int i;
unsigned long flags;
- spin_lock_irqsave(&remote->remote_lock, flags);
- remote->remotes[index].registered = false;
- spin_unlock_irqrestore(&remote->remote_lock, flags);
+ for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+ if (remote->remotes[i].serial == serial) {
- if (remote->remotes[index].battery.battery)
- devres_release_group(&wacom->hdev->dev,
- &remote->remotes[index].battery.bat_desc);
+ spin_lock_irqsave(&remote->remote_lock, flags);
+ remote->remotes[i].registered = false;
+ spin_unlock_irqrestore(&remote->remote_lock, flags);
- if (remote->remotes[index].group.name)
- devres_release_group(&wacom->hdev->dev,
- &remote->remotes[index]);
+ if (remote->remotes[i].battery.battery)
+ devres_release_group(&wacom->hdev->dev,
+ &remote->remotes[i].battery.bat_desc);
+
+ if (remote->remotes[i].group.name)
+ devres_release_group(&wacom->hdev->dev,
+ &remote->remotes[i]);
- for (i = 0; i < WACOM_MAX_REMOTES; i++) {
- if (remote->remotes[i].serial == serial) {
remote->remotes[i].serial = 0;
remote->remotes[i].group.name = NULL;
- remote->remotes[i].registered = false;
remote->remotes[i].battery.battery = NULL;
wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
}
--
2.7.4
From: Marcin Nowakowski <marcin.nowakowski(a)mips.com>
Change 73fbc1eba7ff added a fix to ensure that the memory range between
PHYS_OFFSET and low memory address specified by mem= cmdline argument is
not later processed by free_all_bootmem.
This change was incorrect for systems where the commandline specifies
more than 1 mem argument, as it will cause all memory between
PHYS_OFFSET and each of the memory offsets to be marked as reserved,
which results in parts of the RAM marked as reserved (Creator CI20's
u-boot has a default commandline argument 'mem=256M@0x0
mem=768M@0x30000000').
Change the behaviour to ensure that only the range between PHYS_OFFSET
and the lowest start address of the memories is marked as protected.
This change also ensures that the range is marked protected even if it's
only defined through the devicetree and not only via commandline
arguments.
Reported-by: Mathieu Malaterre <mathieu.malaterre(a)gmail.com>
Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)mips.com>
Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing")
Cc: <stable(a)vger.kernel.org> # v4.11
---
v2: Use updated email adress, add tag for stable.
arch/mips/kernel/setup.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 702c678de116..f19d61224c71 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -375,6 +375,7 @@ static void __init bootmem_init(void)
unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
+ phys_addr_t ramstart = ~0UL;
bool bootmap_valid = false;
int i;
@@ -395,6 +396,21 @@ static void __init bootmem_init(void)
max_low_pfn = 0;
/*
+ * Reserve any memory between the start of RAM and PHYS_OFFSET
+ */
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+ continue;
+
+ ramstart = min(ramstart, boot_mem_map.map[i].addr);
+ }
+
+ if (ramstart > PHYS_OFFSET)
+ add_memory_region(PHYS_OFFSET, ramstart - PHYS_OFFSET,
+ BOOT_MEM_RESERVED);
+
+
+ /*
* Find the highest page frame number we have available.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
@@ -664,9 +680,6 @@ static int __init early_parse_mem(char *p)
add_memory_region(start, size, BOOT_MEM_RAM);
- if (start && start > PHYS_OFFSET)
- add_memory_region(PHYS_OFFSET, start - PHYS_OFFSET,
- BOOT_MEM_RESERVED);
return 0;
}
early_param("mem", early_parse_mem);
--
2.11.0
This is an automatic generated email to let you know that the following patch were queued:
Subject: media: dt-bindings/media/cec-gpio.txt: mention the CEC/HPD max voltages
Author: Hans Verkuil <hverkuil(a)xs4all.nl>
Date: Sat Dec 16 05:44:13 2017 -0500
Mention the maximum voltages of the CEC and HPD lines. Since in the example
these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V
it is a good idea to warn against directly connecting the HPD to the Raspberry
Pi's GPIO line.
Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com>
Reviewed-by: Rob Herring <robh(a)kernel.org>
Cc: <stable(a)vger.kernel.org> # for v4.15
Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com>
Documentation/devicetree/bindings/media/cec-gpio.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
---
diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
index 46a0bac8b3b9..12fcd55ed153 100644
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ b/Documentation/devicetree/bindings/media/cec-gpio.txt
@@ -4,6 +4,10 @@ The HDMI CEC GPIO module supports CEC implementations where the CEC line
is hooked up to a pull-up GPIO line and - optionally - the HPD line is
hooked up to another GPIO line.
+Please note: the maximum voltage for the CEC line is 3.63V, for the HPD
+line it is 5.3V. So you may need some sort of level conversion circuitry
+when connecting them to a GPIO line.
+
Required properties:
- compatible: value must be "cec-gpio".
- cec-gpios: gpio that the CEC line is connected to. The line should be
@@ -21,7 +25,7 @@ the following property is optional:
Example for the Raspberry Pi 3 where the CEC line is connected to
pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is
-connected to pin 11 aka BCM17:
+connected to pin 11 aka BCM17 (some level shifter is needed for this!):
#include <dt-bindings/gpio/gpio.h>
Tree/Branch: v4.1.49
Git describe: v4.1.49
Commit: 30ad2851a6 Linux 4.1.49
Build Time: 67 min 8 sec
Passed: 9 / 9 (100.00 %)
Failed: 0 / 9 ( 0.00 %)
Errors: 0
Warnings: 31
Section Mismatches: 1
-------------------------------------------------------------------------------
defconfigs with issues (other than build errors):
21 warnings 3 mismatches : arm64-allmodconfig
2 warnings 0 mismatches : arm-multi_v7_defconfig
23 warnings 0 mismatches : arm-allmodconfig
2 warnings 0 mismatches : arm-multi_v5_defconfig
4 warnings 0 mismatches : x86_64-defconfig
-------------------------------------------------------------------------------
Warnings Summary: 31
8 ../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
5 ../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
2 ../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
2 ../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=]
2 ../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable]
2 ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp]
2 ../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
2 ../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
2 ../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
2 ../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
2 ../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
2 ../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
1 ../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined
1 ../drivers/xen/swiotlb-xen.c:704:27: warning: passing argument 6 of '__generic_dma_ops(dev)->mmap' makes pointer from integer without a cast [-Wint-conversion]
1 ../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
1 ../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized]
1 ../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable]
1 ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
1 ../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
1 ../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
1 ../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined
1 ../drivers/iommu/intel-iommu.c:3800:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
1 ../drivers/iommu/dmar.c:1849:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
1 ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined
1 ../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
1 ../drivers/hid/hid-input.c:1163:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
1 ../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=]
1 ../arch/x86/include/asm/msr.h:209:23: warning: right shift count >= width of type [-Wshift-count-overflow]
1 ../arch/arm64/xen/../../arm/xen/mm.c:183:10: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
1 ../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=]
1 ../arch/arm/include/asm/cmpxchg.h:205:3: warning: value computed is not used [-Wunused-value]
Section Mismatch Summary: 1
3 WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit()
===============================================================================
Detailed per-defconfig build reports below:
-------------------------------------------------------------------------------
arm64-allmodconfig : PASS, 0 errors, 21 warnings, 3 section mismatches
Warnings:
../arch/arm64/xen/../../arm/xen/mm.c:183:10: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined
../drivers/mmc/host/sh_mmcif.c:401:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
../drivers/mmc/host/sh_mmcif.c:402:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=]
../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable]
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp]
../drivers/usb/renesas_usbhs/common.c:492:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
../drivers/xen/swiotlb-xen.c:704:27: warning: passing argument 6 of '__generic_dma_ops(dev)->mmap' makes pointer from integer without a cast [-Wint-conversion]
Section Mismatches:
WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit()
WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit()
WARNING: drivers/staging/fsl-mc/bus/mc-bus-driver.o(.init.text+0x168): Section mismatch in reference from the function init_module() to the function .exit.text:dprc_driver_exit()
-------------------------------------------------------------------------------
arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches
Warnings:
../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized]
-------------------------------------------------------------------------------
arm-allmodconfig : PASS, 0 errors, 23 warnings, 0 section mismatches
Warnings:
../arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=]
../drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../drivers/ata/pata_hpt366.c:379:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../drivers/ata/pata_hpt366.c:382:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
../arch/arm/include/asm/cmpxchg.h:205:3: warning: value computed is not used [-Wunused-value]
../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
../sound/pci/oxygen/oxygen_mixer.c:91:43: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgm204.c:975:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=]
../drivers/infiniband/hw/cxgb4/mem.c:147:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
../include/trace/ftrace.h:28:0: warning: "TRACE_SYSTEM_STRING" redefined
../drivers/media/platform/coda/./trace.h:12:0: warning: "TRACE_SYSTEM_STRING" redefined
../drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable]
../drivers/scsi/be2iscsi/be_main.c:3168:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../include/linux/kernel.h:723:17: warning: comparison of distinct pointer types lacks a cast
../drivers/scsi/qla2xxx/qla_target.c:3086:6: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 8 has type 'uint32_t {aka unsigned int}' [-Wformat=]
../drivers/scsi/qla2xxx/qla_target.c:3083:17: warning: unused variable 'se_cmd' [-Wunused-variable]
../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp]
-------------------------------------------------------------------------------
arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches
Warnings:
../include/linux/blkdev.h:624:26: warning: switch condition has boolean value [-Wswitch-bool]
../drivers/rtc/rtc-pcf8563.c:444:5: warning: 'alm_pending' may be used uninitialized in this function [-Wmaybe-uninitialized]
-------------------------------------------------------------------------------
x86_64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches
Warnings:
../arch/x86/include/asm/msr.h:209:23: warning: right shift count >= width of type [-Wshift-count-overflow]
../drivers/hid/hid-input.c:1163:67: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
../drivers/iommu/dmar.c:1849:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
../drivers/iommu/intel-iommu.c:3800:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses]
-------------------------------------------------------------------------------
Passed with no errors, warnings or mismatches:
x86_64-allnoconfig
arm64-allnoconfig
arm-allnoconfig
arm64-defconfig
On Mon, Jan 22, 2018 at 3:34 PM, Maxime Ripard
<maxime.ripard(a)free-electrons.com> wrote:
> Hi,
>
> On Sat, Jan 20, 2018 at 11:37:28AM +0800, Chen-Yu Tsai wrote:
>> On Fri, Jan 19, 2018 at 9:32 PM, Maxime Ripard
>> <maxime.ripard(a)free-electrons.com> wrote:
>> > The DRM driver most notably, but also out of tree drivers (for now) like
>> > the VPU or GPU drivers, are quite big consumers of large, contiguous memory
>> > buffers. However, the sunxi_defconfig doesn't enable CMA in order to
>> > mitigate that, which makes them almost unusable.
>> >
>> > Enable it to make sure it somewhat works.
>>
>> IIRC the default size for CMA pretty much limits it to small tablet
>> screen resolutions. Is this something we want to leave up to the
>> user?
>
> That's one of the pain points of CMA in our case. The amount of memory
> you need depends on the resolution itself, but also the number of
> multiple buffers you want to use, and even the number of planes you
> want to use.
>
> And then, you have to trade that off with the amount of RAM you have
> on your board in order to still have something that's usable.
>
> tl;dr: I don't really see how to define a value good enough for
> everyone.
Yeah, that's what I thought. On the other hand, I don't think any
of the kernelci boards have display enabled? So either way we won't
see any automated tests fail.
ChenYu
The patch titled
Subject: kasan: don't emit builtin calls when sanitization is off
has been added to the -mm tree. Its filename is
kasan-dont-emit-builtin-calls-when-sanitization-is-off.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/kasan-dont-emit-builtin-calls-when…
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/kasan-dont-emit-builtin-calls-when…
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Andrey Konovalov <andreyknvl(a)google.com>
Subject: kasan: don't emit builtin calls when sanitization is off
With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset). KASAN uses some
macro tricks to use the proper version where required. For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.
The issue is that clang emits memset() calls even when there is no
memset() in the source code. They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.
The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.
Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.151638459…
Signed-off-by: Andrey Konovalov <andreyknvl(a)google.com>
Acked-by: Nick Desaulniers <ndesaulniers(a)google.com>
Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com>
Cc: Michal Marek <michal.lkml(a)markovi.net>
Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com>
Cc: Alexander Potapenko <glider(a)google.com>
Cc: Dmitry Vyukov <dvyukov(a)google.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
Makefile | 3 ++-
scripts/Makefile.kasan | 3 +++
scripts/Makefile.lib | 2 +-
3 files changed, 6 insertions(+), 2 deletions(-)
diff -puN Makefile~kasan-dont-emit-builtin-calls-when-sanitization-is-off Makefile
--- a/Makefile~kasan-dont-emit-builtin-calls-when-sanitization-is-off
+++ a/Makefile
@@ -432,7 +432,8 @@ export MAKE AWK GENKSYMS INSTALLKERNEL P
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_KASAN CFLAGS_UBSAN
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
diff -puN scripts/Makefile.kasan~kasan-dont-emit-builtin-calls-when-sanitization-is-off scripts/Makefile.kasan
--- a/scripts/Makefile.kasan~kasan-dont-emit-builtin-calls-when-sanitization-is-off
+++ a/scripts/Makefile.kasan
@@ -31,4 +31,7 @@ else
endif
CFLAGS_KASAN += $(call cc-option, -fsanitize-address-use-after-scope)
+
+CFLAGS_KASAN_NOSANITIZE := -fno-builtin
+
endif
diff -puN scripts/Makefile.lib~kasan-dont-emit-builtin-calls-when-sanitization-is-off scripts/Makefile.lib
--- a/scripts/Makefile.lib~kasan-dont-emit-builtin-calls-when-sanitization-is-off
+++ a/scripts/Makefile.lib
@@ -121,7 +121,7 @@ endif
ifeq ($(CONFIG_KASAN),y)
_c_flags += $(if $(patsubst n%,, \
$(KASAN_SANITIZE_$(basetarget).o)$(KASAN_SANITIZE)y), \
- $(CFLAGS_KASAN))
+ $(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
endif
ifeq ($(CONFIG_UBSAN),y)
_
Patches currently in -mm which might be from andreyknvl(a)google.com are
kasan-dont-emit-builtin-calls-when-sanitization-is-off.patch
kasan-fix-prototype-author-email-address.patch
kasan-clean-up-kasan_shadow_scale_shift-usage.patch
The patch titled
Subject: mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
has been added to the -mm tree. Its filename is
mm-hmm-fix-uninitialized-use-of-entry-in-hmm_vma_walk_pmd.patch
This patch should soon appear at
http://ozlabs.org/~akpm/mmots/broken-out/mm-hmm-fix-uninitialized-use-of-en…
and later at
http://ozlabs.org/~akpm/mmotm/broken-out/mm-hmm-fix-uninitialized-use-of-en…
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Ralph Campbell <rcampbell(a)nvidia.com>
Subject: mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
The variable 'entry' is used before being initialized in
hmm_vma_walk_pmd().
Link: http://lkml.kernel.org/r/20180122185759.26286-1-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell(a)nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse(a)redhat.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
mm/hmm.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff -puN mm/hmm.c~mm-hmm-fix-uninitialized-use-of-entry-in-hmm_vma_walk_pmd mm/hmm.c
--- a/mm/hmm.c~mm-hmm-fix-uninitialized-use-of-entry-in-hmm_vma_walk_pmd
+++ a/mm/hmm.c
@@ -418,7 +418,7 @@ again:
}
if (!pte_present(pte)) {
- swp_entry_t entry;
+ swp_entry_t entry = pte_to_swp_entry(pte);
if (!non_swap_entry(entry)) {
if (hmm_vma_walk->fault)
@@ -426,8 +426,6 @@ again:
continue;
}
- entry = pte_to_swp_entry(pte);
-
/*
* This is a special swap entry, ignore migration, use
* device and report anything else as error.
_
Patches currently in -mm which might be from rcampbell(a)nvidia.com are
mm-hmm-fix-uninitialized-use-of-entry-in-hmm_vma_walk_pmd.patch
The patch titled
Subject: scripts/gdb/linux/tasks.py: fix get_thread_info
has been removed from the -mm tree. Its filename was
scripts-gdb-fix-get_thread_info.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Xi Kangjie <imxikangjie(a)gmail.com>
Subject: scripts/gdb/linux/tasks.py: fix get_thread_info
Since kernel 4.9, the thread_info has been moved into task_struct, no
longer locates at the bottom of kernel stack.
See c65eacbe290b ("sched/core: Allow putting thread_info into
task_struct") and 15f4eae70d36 ("x86: Move thread_info into task_struct").
Before fix:
(gdb) set $current = $lx_current()
(gdb) p $lx_thread_info($current)
$1 = {flags = 1470918301}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
After fix:
(gdb) p $lx_thread_info($current)
$1 = {flags = 2147483648}
(gdb) p $current.thread_info
$2 = {flags = 2147483648}
Link: http://lkml.kernel.org/r/20180118210159.17223-1-imxikangjie@gmail.com
Fixes: 15f4eae70d36 ("x86: Move thread_info into task_struct")
Signed-off-by: Xi Kangjie <imxikangjie(a)gmail.com>
Acked-by: Jan Kiszka <jan.kiszka(a)siemens.com>
Acked-by: Kieran Bingham <kbingham(a)kernel.org>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
scripts/gdb/linux/tasks.py | 2 ++
1 file changed, 2 insertions(+)
diff -puN scripts/gdb/linux/tasks.py~scripts-gdb-fix-get_thread_info scripts/gdb/linux/tasks.py
--- a/scripts/gdb/linux/tasks.py~scripts-gdb-fix-get_thread_info
+++ a/scripts/gdb/linux/tasks.py
@@ -96,6 +96,8 @@ def get_thread_info(task):
thread_info_addr = task.address + ia64_task_size
thread_info = thread_info_addr.cast(thread_info_ptr_type)
else:
+ if task.type.fields()[0].type == thread_info_type.get_type():
+ return task['thread_info']
thread_info = task['stack'].cast(thread_info_ptr_type)
return thread_info.dereference()
_
Patches currently in -mm which might be from imxikangjie(a)gmail.com are