January 2018 - Linux-stable-mirror

[Linux-stable-mirror] [PATCH] drbd: fix discard_zeroes_if_aligned regression

by Eric Wheeler

From: Eric Wheeler <git(a)linux.ewheeler.net> According to drbd.conf documentation, "To not break established and expected behaviour, and suddenly cause fstrim on thin-provisioned LVs to run out-of-space instead of freeing up space, the default value is yes." This behavior regressed in the REQ_OP_WRITE_ZEROES refactor near 45c21793 drbd: implement REQ_OP_WRITE_ZEROES 0dbed96 drbd: make intelligent use of blkdev_issue_zeroout which caused dm-thin backed DRBD volumes to zero blocks and run out of space instead of passing discard to the backing device as defined by the discard_zeroes_if_aligned option. A helper function could reduce code duplication. Signed-off-by: Eric Wheeler <drbd(a)linux.ewheeler.net> Cc: <stable(a)vger.kernel.org> # 4.14 --- drivers/block/drbd/drbd_receiver.c | 22 ++++++++++++++++++++-- drivers/block/drbd/drbd_req.c | 23 +++++++++++++++++++++-- 2 files changed, 41 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 62a902f..58f0e43 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1507,9 +1507,27 @@ void drbd_bump_write_ordering(struct drbd_resource *resource, struct drbd_backin static void drbd_issue_peer_discard(struct drbd_device *device, struct drbd_peer_request *peer_req) { struct block_device *bdev = device->ldev->backing_bdev; + struct disk_conf *dc; + bool discard_zeroes_if_aligned, zeroout; - if (blkdev_issue_zeroout(bdev, peer_req->i.sector, peer_req->i.size >> 9, - GFP_NOIO, 0)) + rcu_read_lock(); + dc = rcu_dereference(device->ldev->disk_conf); + discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned; + rcu_read_unlock(); + + /* Use zeroout unless discard_zeroes_if_aligned is set. + * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout. + * See also drbd_process_discard_req() in drbd_req.c. + */ + zeroout = true; + if (discard_zeroes_if_aligned && + blkdev_issue_discard(bdev, peer_req->i.sector, + peer_req->i.size >> 9, GFP_NOIO, 0) == 0) + zeroout = false; + + if (zeroout && + blkdev_issue_zeroout(bdev, peer_req->i.sector, + peer_req->i.size >> 9, GFP_NOIO, 0) != 0) peer_req->flags |= EE_WAS_ERROR; drbd_endio_write_sec_final(peer_req); diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index de8566e..070b5e7 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1158,9 +1158,28 @@ static int drbd_process_write_request(struct drbd_request *req) static void drbd_process_discard_req(struct drbd_request *req) { struct block_device *bdev = req->device->ldev->backing_bdev; + struct drbd_device *device = req->device; + struct disk_conf *dc; + bool discard_zeroes_if_aligned, zeroout; - if (blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9, - GFP_NOIO, 0)) + rcu_read_lock(); + dc = rcu_dereference(device->ldev->disk_conf); + discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned; + rcu_read_unlock(); + + /* Use zeroout unless discard_zeroes_if_aligned is set. + * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout. + * See also drbd_issue_peer_discard() in drbd_receiver.c. + */ + zeroout = true; + if (discard_zeroes_if_aligned && + blkdev_issue_discard(bdev, req->i.sector, req->i.size >> 9, + GFP_NOIO, 0) == 0) + zeroout = false; + + if (zeroout && + blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9, + GFP_NOIO, 0) != 0) req->private_bio->bi_status = BLK_STS_IOERR; bio_endio(req->private_bio); } -- 1.8.3.1

5 years, 7 months

3
4
0 0

[Linux-stable-mirror] [PATCH v2] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume

by Roger Quadros

In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init() must be doene before dwc3_core_get_phy(). commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") broke this. The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should be called only once during the life cycle of the driver. However, as dwc3_core_init() is called during system suspend/resume it will result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init() which is wrong. Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup() into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that dwc3_core_ulpi_init() is called only once from dwc3_core_init(). Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from dwc3_core_init(). Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") Cc: linux-stable <stable(a)vger.kernel.org> # >= v4.13 Signed-off-by: Roger Quadros <rogerq(a)ti.com> --- Changelog: v2: - don't break ULPI case. Also take into consideration suspend/resume for ULPI case. drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++++++++++++----------- drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0783250..84382f6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -482,6 +482,22 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } +static int dwc3_core_ulpi_init(struct dwc3 *dwc) +{ + int intf; + int ret = 0; + + intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3); + + if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI || + (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI && + dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "ulpi", 4))) + ret = dwc3_ulpi_init(dwc); + + return ret; +} + /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure @@ -493,7 +509,6 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_phy_setup(struct dwc3 *dwc) { u32 reg; - int ret; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); @@ -564,9 +579,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* FALLTHROUGH */ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - ret = dwc3_ulpi_init(dwc); - if (ret) - return ret; /* FALLTHROUGH */ default: break; @@ -723,6 +735,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) } static int dwc3_core_get_phy(struct dwc3 *dwc); +static int dwc3_core_ulpi_init(struct dwc3 *dwc); /** * dwc3_core_init - Low-level initialization of DWC3 Core @@ -754,17 +767,27 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; - ret = dwc3_core_soft_reset(dwc); - if (ret) - goto err0; + if (!dwc->ulpi_ready) { + ret = dwc3_core_ulpi_init(dwc); + if (ret) + goto err0; + dwc->ulpi_ready = true; + } - ret = dwc3_phy_setup(dwc); + if (!dwc->phys_ready) { + ret = dwc3_core_get_phy(dwc); + if (ret) + goto err0a; + dwc->phys_ready = true; + } + + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0; + goto err0a; dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -837,6 +860,9 @@ static int dwc3_core_init(struct dwc3 *dwc) phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); +err0a: + dwc3_ulpi_exit(dwc); + err0: return ret; } @@ -1229,7 +1255,6 @@ static int dwc3_probe(struct platform_device *pdev) err3: dwc3_free_event_buffers(dwc); - dwc3_ulpi_exit(dwc); err2: pm_runtime_allow(&pdev->dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4a4a4c9..6b202e3 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -795,7 +795,9 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface + * @ulpi_ready: flag to indicate that ULPI is initialized * @isoch_delay: wValue from Set Isochronous Delay request; * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. @@ -893,7 +895,10 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + bool phys_ready; + struct ulpi *ulpi; + bool ulpi_ready; void __iomem *regs; size_t regs_size; -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

6 years

3
7
0 0

Re: [Linux-stable-mirror] stable/linux-3.16.y build: 178 builds: 1 failed, 177 passed, 2 errors, 57 warnings (v3.16.52)

by Arnd Bergmann

On Tue, Jan 2, 2018 at 12:48 PM, kernelci.org bot <bot(a)kernelci.org> wrote: Hi Ben, almost a clean build with kernelci! > Errors summary: > 1 drivers/scsi/mpt2sas/mpt2sas_base.c:3550:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 > 1 drivers/scsi/mpt2sas/mpt2sas_base.c:3550:1: error: insn does not satisfy its constraints: See earlier discussion https://www.spinics.net/lists/stable/msg195996.html > Warnings summary: > 54 include/linux/stddef.h:8:14: warning: 'return' with a value, in function returning void This comes from an incorrect backport of commit 49e67dd17649 ("of: fdt: add missing allocation-failure check") It's harmless, and stable/linux-3.18.y has the correct version: --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -380,6 +380,6 @@ static void __unflatten_device_tree(void *blob, /* Allocate memory for the expanded device tree */ mem = dt_alloc(size + 4, __alignof__(struct device_node)); if (!mem) - return NULL; + return; memset(mem, 0, size); > 2 ipc/sem.c:377:6: warning: '___p1' may be used uninitialized in this function [-Wmaybe-uninitialized] This code was last touched in 3.16 by the backport of commit 5864a2fd3088 ("ipc/sem.c: fix complex_count vs. simple op race") The warning is in "smp_load_acquire(&sma->complex_mode))", and I suspect that commit 27d7be1801a4 ("ipc/sem.c: avoid using spin_unlock_wait()") avoided the warning upstream by removing the smp_mb() before it. The code is way too complex for a fly-by analysis, so I'm adding Manfred to Cc here. It may be worth comparing the full list of backports that went into ipc/sem.c in 3.16.y with those in 3.18.y and 4.1.y that don't have the warning. Here is what I see in the git history: $ git log --oneline v3.16..stable/linux-3.16.y ipc/sem.c accb9f16adba ipc/sem.c: fix complex_count vs. simple op race 5b11c133308b ipc: remove use of seq_printf return value 08397b1a5cd4 sysv, ipc: fix security-layer leaking 35cfc2b3a9da ipc/sem.c: fully initialize sem_array before making it visible 69a9a86b645f ipc/sem.c: update/correct memory barriers 30f995ba77ca ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() 76ce4fe19d6b ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits $ git log --oneline v3.16..stable/linux-3.18.y ipc/sem.c 7dd90826dfba sysv, ipc: fix security-layer leaking ff12efa03da1 ipc/sem.c: update/correct memory barriers 38b50c47c25e ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits e8577d1f0329 ipc/sem.c: fully initialize sem_array before making it visible $ git log --oneline v3.16..stable/linux-4.1.y ipc/sem.c e2b438fdfa4d sysv, ipc: fix security-layer leaking b6805da60f01 ipc/sem.c: update/correct memory barriers 7be83cf01024 ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits 7f032d6ef615 ipc: remove use of seq_printf return value 52644c9ab3fa ipc,sem: use current->state helpers 2e094abfd1f2 ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() e8577d1f0329 ipc/sem.c: fully initialize sem_array before making it visible $ git log --oneline v3.16..stable/linux-4.4.y ipc/sem.c f6031d95320d ipc/sem.c: fix complex_count vs. simple op race 62659f0b9ed7 sysv, ipc: fix security-layer leaking 3ed1f8a99d70 ipc/sem.c: update/correct memory barriers a97955844807 ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem() 602b8593d2b4 ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits 55b7ae50167e ipc: rename ipc_obtain_object 7f032d6ef615 ipc: remove use of seq_printf return value 52644c9ab3fa ipc,sem: use current->state helpers 2e094abfd1f2 ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() e8577d1f0329 ipc/sem.c: fully initialize sem_array before making it visible $ git log --oneline v3.16..stable/linux-4.9.y ipc/sem.c 2a1613a586de ipc/sem.c: add cond_resched in exit_sme 5864a2fd3088 ipc/sem.c: fix complex_count vs. simple op race 9b24fef9f041 sysv, ipc: fix security-layer leaking be3e78449803 locking/spinlock: Update spin_unlock_wait() users 33ac279677dc locking/barriers: Introduce smp_acquire__after_ctrl_dep() a5f4db877177 ipc/sem: make semctl setting sempid consistent 1d5cfdb07628 tree wide: use kvfree() than conditional kfree()/vfree() 3ed1f8a99d70 ipc/sem.c: update/correct memory barriers a97955844807 ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem() 602b8593d2b4 ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits 55b7ae50167e ipc: rename ipc_obtain_object 7f032d6ef615 ipc: remove use of seq_printf return value 52644c9ab3fa ipc,sem: use current->state helpers 2e094abfd1f2 ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() e8577d1f0329 ipc/sem.c: fully initialize sem_array before making it visible > 1 arch/arm/kernel/head-nommu.S:167: Warning: Use of r13 as a source register is deprecated when r15 is the destination register. Fixed by backporting: 970d96f9a81b ("ARM: 8383/1: nommu: avoid deprecated source register on mov") Arnd

6 years, 1 month

3
2
0 0

[Linux-stable-mirror] [PATCH 4.4 000/105] 4.4.106-stable review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.106 release. There are 105 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sun Dec 17 09:22:39 UTC 2017. Anything received after that time might be too late. The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.106-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.4.106-rc1 Vincent Pelletier <plr.vincent(a)gmail.com> usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping Marc Zyngier <marc.zyngier(a)arm.com> arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers" Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Revert "x86/efi: Hoist page table switching code into efi_call_virt()" Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Revert "x86/efi: Build our own page table structures" Eric Dumazet <edumazet(a)google.com> net/packet: fix a race in packet_bind() and packet_notifier() Mike Maloney <maloney(a)google.com> packet: fix crash in fanout_demux_rollover() Hangbin Liu <liuhangbin(a)gmail.com> sit: update frag_off info Håkon Bugge <Haakon.Bugge(a)oracle.com> rds: Fix NULL pointer dereference in __rds_rdma_map Jon Maloy <jon.maloy(a)ericsson.com> tipc: fix memory leak in tipc_accept_from_sock() Al Viro <viro(a)zeniv.linux.org.uk> more bio_map_user_iov() leak fixes Heiko Carstens <heiko.carstens(a)de.ibm.com> s390: always save and restore all registers on context switch Masamitsu Yamazaki <m-yamazaki(a)ah.jp.nec.com> ipmi: Stop timers before cleaning up the module Paul Moore <paul(a)paul-moore.com> audit: ensure that 'audit=1' actually enables audit for PID 1 Keefe Liu <liuqifa(a)huawei.com> ipvlan: fix ipv6 outbound device David Howells <dhowells(a)redhat.com> afs: Connect up the CB.ProbeUuid Majd Dibbiny <majd(a)mellanox.com> IB/mlx5: Assign send CQ and recv CQ of UMR QP Mark Bloch <markb(a)mellanox.com> IB/mlx4: Increase maximal message size under UD QP Herbert Xu <herbert(a)gondor.apana.org.au> xfrm: Copy policy family in clone_policy Jason Baron <jbaron(a)akamai.com> jump_label: Invoke jump_label_test() via early_initcall() Arvind Yadav <arvind.yadav.cs(a)gmail.com> atm: horizon: Fix irq release error Xin Long <lucien.xin(a)gmail.com> sctp: use the right sk after waking up from wait_buf sleep Xin Long <lucien.xin(a)gmail.com> sctp: do not free asoc when it is already dead in sctp_sendmsg Pavel Tatashin <pasha.tatashin(a)oracle.com> sparc64/mm: set fields in deferred pages Ming Lei <ming.lei(a)redhat.com> block: wake up all tasks blocked in get_request() Chuck Lever <chuck.lever(a)oracle.com> sunrpc: Fix rpc_task_begin trace point Trond Myklebust <trond.myklebust(a)primarydata.com> NFS: Fix a typo in nfs_rename() Randy Dunlap <rdunlap(a)infradead.org> dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0 Stephen Bates <sbates(a)raithlin.com> lib/genalloc.c: make the avail variable an atomic_long_t Xin Long <lucien.xin(a)gmail.com> route: update fnhe_expires for redirect when the fnhe exists Xin Long <lucien.xin(a)gmail.com> route: also update fnhe_genid when updating a route cache Ben Hutchings <ben.hutchings(a)codethink.co.uk> mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl() Masahiro Yamada <yamada.masahiro(a)socionext.com> kbuild: pkg: use --transform option to prefix paths in tar Jérémy Lefaure <jeremy.lefaure(a)lse.epita.fr> EDAC, i5000, i5400: Fix definition of NRECMEMB register Jérémy Lefaure <jeremy.lefaure(a)lse.epita.fr> EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro Alexey Kardashevskiy <aik(a)ozlabs.ru> powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested Jim Qu <Jim.Qu(a)amd.com> drm/amd/amdgpu: fix console deadlock if late init failed Jan Kara <jack(a)suse.cz> axonram: Fix gendisk handling Florian Westphal <fw(a)strlen.de> netfilter: don't track fragmented packets Johannes Thumshirn <jthumshirn(a)suse.de> zram: set physical queue limits to avoid array out of bounds accesses Chris Brandt <chris.brandt(a)renesas.com> i2c: riic: fix restart condition Krzysztof Kozlowski <krzk(a)kernel.org> crypto: s5p-sss - Fix completing crypto request in IRQ handler WANG Cong <xiyou.wangcong(a)gmail.com> ipv6: reorder icmpv6_init() and ip6_mr_init() Michal Schmidt <mschmidt(a)redhat.com> bnx2x: do not rollback VF MAC/VLAN filters we did not configure Michal Schmidt <mschmidt(a)redhat.com> bnx2x: fix possible overrun of VFPF multicast addresses array Michal Schmidt <mschmidt(a)redhat.com> bnx2x: prevent crash when accessing PTP with interface down Blomme, Maarten <Maarten.Blomme(a)flir.com> spi_ks8995: fix "BUG: key accdaa28 not in .data!" Mark Rutland <mark.rutland(a)arm.com> arm64: KVM: Survive unknown traps from guests Mark Rutland <mark.rutland(a)arm.com> arm: KVM: Survive unknown traps from guests Wanpeng Li <wanpeng.li(a)hotmail.com> KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset Franck Demathieu <fdemathieu(a)gmail.com> irqchip/crossbar: Fix incorrect type of register size James Smart <jsmart2021(a)gmail.com> scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters Tejun Heo <tj(a)kernel.org> workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq Tejun Heo <tj(a)kernel.org> libata: drop WARN from protocol error in ata_sff_qc_issue() Jim Mattson <jmattson(a)google.com> kvm: nVMX: VMCLEAR should not cause the vCPU to shut down Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> USB: gadgetfs: Fix a potential memory leak in 'dev_config()' John Keeping <john(a)metanate.com> usb: gadget: configs: plug memory leak Daniel Drake <drake(a)endlessm.com> HID: chicony: Add support for another ASUS Zen AiO keyboard Phil Reid <preid(a)electromag.com.au> gpio: altera: Use handle_level_irq when configured as a level_high Guenter Roeck <linux(a)roeck-us.net> ARM: OMAP2+: Release device node after it is no longer needed. Guenter Roeck <linux(a)roeck-us.net> ARM: OMAP2+: Fix device node reference counts David Daney <david.daney(a)cavium.com> module: set __jump_table alignment to 8 Sachin Sant <sachinp(a)linux.vnet.ibm.com> selftest/powerpc: Fix false failures for skipped tests Thomas Gleixner <tglx(a)linutronix.de> x86/hpet: Prevent might sleep splat on resume Ladislav Michl <ladis(a)linux-mips.org> ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure Steffen Klassert <steffen.klassert(a)secunet.com> vti6: Don't report path MTU below IPV6_MIN_MTU. Sasha Levin <alexander.levin(a)verizon.com> Revert "s390/kbuild: enable modversions for symbols exported from asm" Sasha Levin <alexander.levin(a)verizon.com> Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA" Sasha Levin <alexander.levin(a)verizon.com> Revert "drm/armada: Fix compile fail" Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> mm: drop unused pmdp_huge_get_and_clear_notify() Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> thp: fix MADV_DONTNEED vs. numa balancing race Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> thp: reduce indentation level in change_huge_pmd() Stephen Hemminger <stephen(a)networkplumber.org> scsi: storvsc: Workaround for virtual DVD SCSI version Russell King <rmk+kernel(a)armlinux.org.uk> ARM: avoid faulting on qemu Russell King <rmk+kernel(a)armlinux.org.uk> ARM: BUG if jumping to usermode address in kernel mode Dave Martin <Dave.Martin(a)arm.com> arm64: fpsimd: Prevent registers leaking from dead tasks Andrew Honig <ahonig(a)google.com> KVM: VMX: remove I/O port 0x80 bypass on Intel hosts Kristina Martsenko <kristina.martsenko(a)arm.com> arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one Laurent Caumont <lcaumont2(a)gmail.com> media: dvb: i2c transfers over usb cannot be done from stack Marek Szyprowski <m.szyprowski(a)samsung.com> drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU Dave Gordon <david.s.gordon(a)intel.com> drm: extra printk() wrapper macros Daniel Thompson <daniel.thompson(a)linaro.org> kdb: Fix handling of kallsyms_symbol_next() return value Heiko Carstens <heiko.carstens(a)de.ibm.com> s390: fix compat system call table Robin Murphy <robin.murphy(a)arm.com> iommu/vt-d: Fix scatterlist offset handling Jaejoong Kim <climbbb.kim(a)gmail.com> ALSA: usb-audio: Add check return value for usb_string() Jaejoong Kim <climbbb.kim(a)gmail.com> ALSA: usb-audio: Fix out-of-bound error Takashi Iwai <tiwai(a)suse.de> ALSA: seq: Remove spurious WARN_ON() at timer check Robb Glasser <rglasser(a)google.com> ALSA: pcm: prevent UAF in snd_pcm_info Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> x86/PCI: Make broadcom_postcore_init() check acpi_disabled Eric Biggers <ebiggers(a)google.com> X.509: reject invalid BIT STRING for subjectPublicKey Eric Biggers <ebiggers(a)google.com> ASN.1: check for error from ASN1_OP_END__ACT actions Eric Biggers <ebiggers(a)google.com> ASN.1: fix out-of-bounds read when parsing indefinite length item Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> efi: Move some sysfs files to be read-only by root Huacai Chen <chenhc(a)lemote.com> scsi: libsas: align sata_device's rps_resp on a cacheline William Breathitt Gray <vilhelm.gray(a)gmail.com> isa: Prevent NULL dereference in isa_bus driver callbacks Paul Meyer <Paul.Meyer(a)microsoft.com> hv: kvp: Avoid reading past allocated blocks from KVP file weiping zhang <zwp10758(a)gmail.com> virtio: release virtio index when fail to device_register Martin Kelly <mkelly(a)xevo.com> can: usb_8dev: cancel urb on -EPIPE and -EPROTO Martin Kelly <mkelly(a)xevo.com> can: esd_usb2: cancel urb on -EPIPE and -EPROTO Martin Kelly <mkelly(a)xevo.com> can: ems_usb: cancel urb on -EPIPE and -EPROTO Martin Kelly <mkelly(a)xevo.com> can: kvaser_usb: cancel urb on -EPIPE and -EPROTO Jimmy Assarsson <jimmyassarsson(a)gmail.com> can: kvaser_usb: ratelimit errors if incomplete messages are received Jimmy Assarsson <jimmyassarsson(a)gmail.com> can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback() Jimmy Assarsson <jimmyassarsson(a)gmail.com> can: kvaser_usb: free buf in error paths Oliver Stäbler <oliver.staebler(a)bytesatwork.ch> can: ti_hecc: Fix napi poll return value for repoll ------------- Diffstat: Makefile | 4 +- arch/arm/include/asm/assembler.h | 18 +++ arch/arm/include/asm/kvm_arm.h | 4 +- arch/arm/kernel/entry-header.S | 6 + arch/arm/kvm/handle_exit.c | 19 +-- arch/arm/mach-omap2/gpmc-onenand.c | 10 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 25 ++-- arch/arm64/include/asm/kvm_arm.h | 3 +- arch/arm64/kernel/process.c | 9 ++ arch/arm64/kvm/handle_exit.c | 19 +-- arch/powerpc/platforms/powernv/pci-ioda.c | 3 + arch/powerpc/sysdev/axonram.c | 5 +- arch/s390/include/asm/asm-prototypes.h | 8 -- arch/s390/include/asm/switch_to.h | 19 ++- arch/s390/kernel/syscalls.S | 6 +- arch/sparc/mm/init_64.c | 9 +- arch/x86/include/asm/efi.h | 26 ---- arch/x86/kernel/hpet.c | 2 +- arch/x86/kvm/vmx.c | 31 ++--- arch/x86/mm/pageattr.c | 17 ++- arch/x86/pci/broadcom_bus.c | 2 +- arch/x86/platform/efi/efi.c | 39 +++--- arch/x86/platform/efi/efi_32.c | 5 - arch/x86/platform/efi/efi_64.c | 137 ++++++---------------- arch/x86/platform/efi/efi_stub_64.S | 43 +++++++ block/bio.c | 14 ++- block/blk-core.c | 4 +- crypto/asymmetric_keys/x509_cert_parser.c | 2 + drivers/ata/libata-sff.c | 1 - drivers/atm/horizon.c | 2 +- drivers/base/isa.c | 10 +- drivers/block/zram/zram_drv.c | 2 + drivers/char/ipmi/ipmi_si_intf.c | 44 +++---- drivers/crypto/s5p-sss.c | 5 +- drivers/edac/i5000_edac.c | 8 +- drivers/edac/i5400_edac.c | 9 +- drivers/firmware/efi/efi.c | 3 +- drivers/firmware/efi/esrt.c | 15 +-- drivers/firmware/efi/runtime-map.c | 10 +- drivers/gpio/gpio-altera.c | 26 ++-- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 +- drivers/gpu/drm/armada/Makefile | 2 - drivers/gpu/drm/exynos/exynos_drm_gem.c | 9 ++ drivers/hid/Kconfig | 4 +- drivers/hid/hid-chicony.c | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/i2c/busses/i2c-riic.c | 6 +- drivers/infiniband/hw/mlx4/qp.c | 2 +- drivers/infiniband/hw/mlx5/main.c | 2 + drivers/iommu/intel-iommu.c | 8 +- drivers/irqchip/irq-crossbar.c | 8 +- drivers/media/usb/dvb-usb/dibusb-common.c | 16 ++- drivers/memory/omap-gpmc.c | 4 +- drivers/net/can/ti_hecc.c | 3 + drivers/net/can/usb/ems_usb.c | 2 + drivers/net/can/usb/esd_usb2.c | 2 + drivers/net/can/usb/kvaser_usb.c | 13 +- drivers/net/can/usb/usb_8dev.c | 2 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 20 +++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 8 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 23 ++-- drivers/net/ipvlan/ipvlan_core.c | 2 +- drivers/net/phy/spi_ks8995.c | 1 + drivers/net/wireless/mac80211_hwsim.c | 5 +- drivers/scsi/lpfc/lpfc_els.c | 14 ++- drivers/scsi/storvsc_drv.c | 27 +++-- drivers/spi/Kconfig | 1 - drivers/usb/gadget/configfs.c | 1 + drivers/usb/gadget/function/f_fs.c | 2 +- drivers/usb/gadget/legacy/inode.c | 4 +- drivers/virtio/virtio.c | 2 + fs/afs/cmservice.c | 3 + fs/nfs/dir.c | 2 +- include/drm/drmP.h | 26 +++- include/linux/genalloc.h | 3 +- include/linux/mmu_notifier.h | 13 -- include/linux/omap-gpmc.h | 5 +- include/linux/sysfs.h | 6 + include/scsi/libsas.h | 2 +- kernel/audit.c | 10 +- kernel/debug/kdb/kdb_io.c | 2 +- kernel/jump_label.c | 2 +- kernel/workqueue.c | 1 + lib/asn1_decoder.c | 49 ++++---- lib/dynamic_debug.c | 4 + lib/genalloc.c | 10 +- mm/huge_memory.c | 82 +++++++++---- net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 4 + net/ipv4/netfilter/nf_nat_l3proto_ipv4.c | 5 - net/ipv4/route.c | 14 ++- net/ipv6/af_inet6.c | 10 +- net/ipv6/ip6_vti.c | 8 +- net/ipv6/sit.c | 1 + net/packet/af_packet.c | 37 +++--- net/packet/internal.h | 1 - net/rds/rdma.c | 2 +- net/sctp/socket.c | 38 ++++-- net/sunrpc/sched.c | 3 +- net/tipc/server.c | 1 + net/xfrm/xfrm_policy.c | 1 + scripts/module-common.lds | 2 + scripts/package/Makefile | 5 +- sound/core/pcm.c | 2 + sound/core/seq/seq_timer.c | 2 +- sound/usb/mixer.c | 13 +- tools/hv/hv_kvp_daemon.c | 70 +++-------- tools/testing/selftests/powerpc/harness.c | 6 +- 109 files changed, 701 insertions(+), 570 deletions(-)

6 years, 3 months

9
123
0 0

[Linux-stable-mirror] [PATCH] soc/tegra: pmc: fix child-node lookup

by Johan Hovold

Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pmc node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Cc: stable <stable(a)vger.kernel.org> # 4.0 Cc: Mikko Perttunen <mperttunen(a)nvidia.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/soc/tegra/pmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 0453ff6839a7..7e9ef3431bea 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -1321,7 +1321,7 @@ static void tegra_pmc_init_tsense_reset(struct tegra_pmc *pmc) if (!pmc->soc->has_tsense_reset) return; - np = of_find_node_by_name(pmc->dev->of_node, "i2c-thermtrip"); + np = of_get_child_by_name(pmc->dev->of_node, "i2c-thermtrip"); if (!np) { dev_warn(dev, "i2c-thermtrip node not found, %s.\n", disabled); return; -- 2.15.0

6 years, 4 months

3
5
0 0

[Linux-stable-mirror] [PATCH] scsi: lpfc: Switch memcpy_fromio() to __read32_copy()

by Huacai Chen

In commit bc73905abf770192 ("[SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup"), lpfc_memcpy_to_slim() have switched memcpy_toio() to __write32_copy() in order to prevent unaligned 64 bit copy. Recently, we found that lpfc_memcpy_from_slim() have similar issues, so let it switch memcpy_fromio() to __read32_copy(). Cc: stable(a)vger.kernel.org Signed-off-by: Huacai Chen <chenhc(a)lemote.com> --- drivers/scsi/lpfc/lpfc_compat.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_compat.h b/drivers/scsi/lpfc/lpfc_compat.h index 6b32b0a..47d4fad 100644 --- a/drivers/scsi/lpfc/lpfc_compat.h +++ b/drivers/scsi/lpfc/lpfc_compat.h @@ -91,8 +91,8 @@ lpfc_memcpy_to_slim( void __iomem *dest, void *src, unsigned int bytes) static inline void lpfc_memcpy_from_slim( void *dest, void __iomem *src, unsigned int bytes) { - /* actually returns 1 byte past dest */ - memcpy_fromio( dest, src, bytes); + /* convert bytes in argument list to word count for copy function */ + __ioread32_copy(dest, src, bytes / sizeof(uint32_t)); } #endif /* __BIG_ENDIAN */ -- 2.7.0

6 years, 5 months

3
5
0 0

Re: [Linux-stable-mirror] [PATCH 4.13 28/43] SMB3: Validate negotiate request must always be signed

by Srivatsa S. Bhat

On 11/1/17 8:18 AM, Greg Kroah-Hartman wrote: > On Tue, Oct 31, 2017 at 03:02:11PM +0200, Thomas Backlund wrote: >> Den 31.10.2017 kl. 11:55, skrev Greg Kroah-Hartman: >>> 4.13-stable review patch. If anyone has any objections, please let me know. >>> >>> ------------------ >>> >>> From: Steve French <smfrench(a)gmail.com> >>> >>> commit 4587eee04e2ac7ac3ac9fa2bc164fb6e548f99cd upstream. >>> >>> According to MS-SMB2 3.2.55 validate_negotiate request must >>> always be signed. Some Windows can fail the request if you send it unsigned >>> >>> See kernel bugzilla bug 197311 >>> >>> Acked-by: Ronnie Sahlberg <lsahlber.redhat.com> >>> Signed-off-by: Steve French <smfrench(a)gmail.com> >>> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> >>> >>> --- >>> fs/cifs/smb2pdu.c | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> --- a/fs/cifs/smb2pdu.c >>> +++ b/fs/cifs/smb2pdu.c >>> @@ -1963,6 +1963,9 @@ SMB2_ioctl(const unsigned int xid, struc >>> } else >>> iov[0].iov_len = get_rfc1002_length(req) + 4; >>> + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ >>> + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) >>> + req->hdr.sync_hdr.Flags |= SMB2_FLAGS_SIGNED; >>> rc = SendReceive2(xid, ses, iov, n_iov, &resp_buftype, flags, &rsp_iov); >>> cifs_small_buf_release(req); >>> >>> >>> >> >> This one needs to be backported to all stable kernels as the commit that >> introduced the regression: >> ' >> 0603c96f3af50e2f9299fa410c224ab1d465e0f9 >> SMB: Validate negotiate (to protect against downgrade) even if signing off >> >> is backported in stable trees as of: 4.9.53, 4.4.90, 3.18.73 > > Oh wait, it breaks the builds on older kernels, that's why I didn't > apply it :) > > Can you provide me with a working backport? > Hi Steve, Is there a version of this fix available for stable kernels? I tried applying this patch to 4.4.109 (and a similar one for 4.9.74), but it didn't fix the problem. Instead, I actually got a NULL pointer dereference when I tried to mount an SMB3 share. Here is the patch I tried on 4.4.109: diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index f2ff60e..3963bd2 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1559,6 +1559,9 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, } else iov[0].iov_len = get_rfc1002_length(req) + 4; + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) + req->hdr.Flags |= SMB2_FLAGS_SIGNED; rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; This results in the following NULL pointer dereference when I try mounting: # mount -vvv -t cifs -o vers=3.0,credentials=.smbcred //<ip_addr>/TestSMB/ testdir [ 53.073057] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 53.073511] IP: [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.073973] PGD 0 [ 53.074427] Oops: 0000 [#1] SMP [ 53.074946] Modules linked in: arc4(E) ecb(E) md4(E) cifs(E) dns_resolver(E) vmw_vsock_vmci_transport(E) vsock(E) hid_generic(E) usbhid(E) hid(E) xt_conntrack(E) mousedev(E) iptable_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) nf_nat(E) iptable_filter(E) ip_tables(E) crc32c_intel(E) xt_LOG(E) nf_conntrack(E) jitterentropy_rng(E) hmac(E) sha256_ssse3(E) sha256_generic(E) drbg(E) vmw_balloon(E) ansi_cprng(E) aesni_intel(E) aes_x86_64(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E) psmouse(E) evdev(E) uhci_hcd(E) ehci_pci(E) ehci_hcd(E) usbcore(E) intel_agp(E) usb_common(E) vmw_vmci(E) i2c_piix4(E) intel_gtt(E) nfit(E) battery(E) tpm_tis(E) tpm(E) ac(E) button(E) sch_fq_codel(E) autofs4(E) [ 53.079435] CPU: 3 PID: 829 Comm: mount.cifs Tainted: G E 4.4.109-possible-fix1+ #21 [ 53.079983] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 [ 53.081086] task: ffff8800b4f41940 ti: ffff8800b92ac000 task.ti: ffff8800b92ac000 [ 53.081667] RIP: 0010:[<ffffffff8138ee9a>] [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.082247] RSP: 0018:ffff8800b92af9a8 EFLAGS: 00010282 [ 53.082604] systemd-journald[284]: Compressed data object 721 -> 468 using XZ [ 53.083419] RAX: ffff8800af5943c0 RBX: ffff8800b484a800 RCX: 00000000ffff0ec7 [ 53.084001] RDX: 0000000000000010 RSI: ffff8800b900af18 RDI: 0000000000000000 [ 53.084602] RBP: ffff8800b92af9e0 R08: ffff8800b92afb64 R09: 0000000000000000 [ 53.085184] R10: 3031322e3030312e R11: 00000000000007f5 R12: 0000000000000002 [ 53.085755] R13: 0000000000000000 R14: ffff8800b900af18 R15: 0000000000000010 [ 53.086333] FS: 00007fb659b45740(0000) GS:ffff88013fcc0000(0000) knlGS:0000000000000000 [ 53.086907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.087480] CR2: 0000000000000050 CR3: 00000000b7970000 CR4: 00000000001606e0 [ 53.088107] Stack: [ 53.088681] ffff8800bba5d8c0 ffff8800b92afa08 ffff8800b484a800 0000000000000002 [ 53.089281] ffff8800b92afac8 000008012400007d ffff8800b484a800 ffff8800b92afa50 [ 53.089871] ffffffffa02194a6 ffff8800b92afb70 ffff8800af5943c0 ffff8800b7a2f800 [ 53.090457] Call Trace: [ 53.091054] [<ffffffffa02194a6>] smb3_calc_signature+0xb6/0x290 [cifs] [ 53.091650] [<ffffffffa0218b5b>] smb2_sign_rqst+0x2b/0x40 [cifs] [ 53.092244] [<ffffffffa0219981>] smb2_setup_request+0xd1/0x170 [cifs] [ 53.092838] [<ffffffffa02082a7>] SendReceive2+0xc7/0x450 [cifs] [ 53.093435] [<ffffffffa02057d5>] ? cifs_small_buf_get+0x15/0x30 [cifs] [ 53.094030] [<ffffffffa021b83f>] ? small_smb2_init+0xdf/0x200 [cifs] [ 53.094616] [<ffffffffa021d6d7>] SMB2_ioctl+0x147/0x310 [cifs] [ 53.095203] [<ffffffffa021d99e>] smb3_validate_negotiate+0xfe/0x2d0 [cifs] [ 53.095792] [<ffffffffa021b196>] SMB2_tcon+0x296/0x500 [cifs] [ 53.096362] [<ffffffff817d7b49>] ? _raw_spin_unlock_irqrestore+0x9/0x10 [ 53.096930] [<ffffffffa01efe0b>] cifs_get_tcon+0x1bb/0x560 [cifs] [ 53.097486] [<ffffffffa01f2b10>] cifs_mount+0x690/0xde0 [cifs] [ 53.098032] [<ffffffff817d7b49>] ? _raw_spin_unlock_irqrestore+0x9/0x10 [ 53.098570] [<ffffffffa01de6eb>] cifs_do_mount+0xcb/0x5a0 [cifs] [ 53.099089] [<ffffffff81193ef7>] ? alloc_pages_current+0x87/0x110 [ 53.099598] [<ffffffff811b7b03>] mount_fs+0x33/0x160 [ 53.100091] [<ffffffff811d1b62>] vfs_kern_mount+0x62/0x100 [ 53.100574] [<ffffffff811d3f1b>] do_mount+0x21b/0xd30 [ 53.101050] [<ffffffff81193ef7>] ? alloc_pages_current+0x87/0x110 [ 53.101511] [<ffffffff811d4d47>] SyS_mount+0x87/0xd0 [ 53.101959] [<ffffffff817d806e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 53.102400] Code: 89 e5 8b 12 e8 78 d2 04 00 31 c0 5d c3 0f 1f 40 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fd 53 49 89 f6 41 89 d7 48 83 ec 10 <4c> 8b 67 50 41 8b 5c 24 2c 48 85 de 75 14 41 ff 54 24 e8 48 83 [ 53.103820] RIP [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.104288] RSP <ffff8800b92af9a8> [ 53.104745] CR2: 0000000000000050 [ 53.105225] ---[ end trace fc2de0ad7f229314 ]--- The CIFS config options enabled are: CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_ACL=y CONFIG_CIFS_DEBUG=y CONFIG_CIFS_DEBUG2=y CONFIG_CIFS_DFS_UPCALL=y CONFIG_CIFS_SMB2=y # CONFIG_CIFS_SMB311 is not set # CONFIG_CIFS_FSCACHE is not set The problem seems to be that crypto_shash_setkey() is called without calling smb3_crypto_shash_allocate() first. So I looked up how mainline avoids this issue, and it looks like the following commit makes a call to generate_signingkey() even when server->sign == false, and this path eventually calls smb3_crytpto_shash_allocate()), thus avoiding the NULL pointer dereference. cabfb3680f78 (CIFS: Enable encryption during session setup phase) So, I adopted this change, and now my resulting patch looks like this: diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index f2ff60e..19cc92c 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -833,7 +833,7 @@ ssetup_exit: if (!rc) { mutex_lock(&server->srv_mutex); - if (server->sign && server->ops->generate_signingkey) { + if (server->ops->generate_signingkey) { rc = server->ops->generate_signingkey(ses); kfree(ses->auth_key.response); ses->auth_key.response = NULL; @@ -1559,6 +1559,9 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, } else iov[0].iov_len = get_rfc1002_length(req) + 4; + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) + req->hdr.Flags |= SMB2_FLAGS_SIGNED; rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; This fixes the NULL pointer dereference, but the mount still fails, but this time for a different reason -- due to STATUS_ACCESS_DENIED: # mount -vvv -t cifs -o vers=3.0,credentials=.smbcred //<ip_addr>/TestSMB/ testdir mount.cifs kernel mount options: ip=<ip_addr>,unc=\\<ip_addr>\TestSMB,vers=3.0,user=srivatsa,pass=******** mount error(5): Input/output error Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Here is the dmesg output: [ 48.192141] fs/cifs/cifsfs.c: Devname: //<ip_addr>/TestSMB/ flags: 0 [ 48.192178] address conversion returned 1 for <ip_addr> [ 48.192205] fs/cifs/connect.c: Username: srivatsa [ 48.192222] fs/cifs/connect.c: file mode: 0x1ed dir mode: 0x1ed [ 48.192280] fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 0 with uid: 0 [ 48.192302] fs/cifs/connect.c: UNC: \\<ip_addr>\TestSMB [ 48.192335] fs/cifs/connect.c: Socket created [ 48.192349] fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x6d6 [ 48.193453] fs/cifs/connect.c: CIFS VFS: in cifs_get_smb_ses as Xid: 1 with uid: 0 [ 48.193462] fs/cifs/connect.c: Demultiplex PID: 829 [ 48.193492] fs/cifs/connect.c: Existing smb sess not found [ 48.193510] fs/cifs/smb2pdu.c: Negotiate protocol [ 48.193531] fs/cifs/transport.c: Sending smb: smb_len=102 [ 48.194301] fs/cifs/connect.c: RFC1002 header 0xaa [ 48.194321] fs/cifs/smb2misc.c: smb2_check_message length: 0xae, smb_buf_length: 0xaa [ 48.194349] fs/cifs/smb2misc.c: SMB2 data length 42 offset 128 [ 48.194367] fs/cifs/smb2misc.c: SMB2 len 174 [ 48.194393] fs/cifs/transport.c: cifs_sync_mid_result: cmd=0 mid=0 state=4 [ 48.194415] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.194436] fs/cifs/smb2pdu.c: mode 0x1 [ 48.194448] fs/cifs/smb2pdu.c: negotiated smb3.0 dialect [ 48.194466] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1 [ 48.194484] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1 [ 48.194502] fs/cifs/connect.c: Security Mode: 0x1 Capabilities: 0x300007 TimeAdjust: 0 [ 48.194525] fs/cifs/smb2pdu.c: Session Setup [ 48.194539] fs/cifs/transport.c: Sending smb: smb_len=120 [ 48.194817] fs/cifs/connect.c: RFC1002 header 0x136 [ 48.194836] fs/cifs/smb2misc.c: smb2_check_message length: 0x13a, smb_buf_length: 0x136 [ 48.194859] fs/cifs/smb2misc.c: SMB2 data length 238 offset 72 [ 48.195306] fs/cifs/smb2misc.c: SMB2 len 314 [ 48.195740] fs/cifs/transport.c: cifs_sync_mid_result: cmd=1 mid=1 state=4 [ 48.196174] Status code returned 0xc0000016 STATUS_MORE_PROCESSING_REQUIRED [ 48.196605] fs/cifs/smb2maperror.c: Mapping SMB2 status code -1073741802 to POSIX err -5 [ 48.197043] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.210008] fs/cifs/transport.c: Sending smb: smb_len=412 [ 48.211625] fs/cifs/connect.c: RFC1002 header 0x48 [ 48.212060] fs/cifs/smb2misc.c: smb2_check_message length: 0x4c, smb_buf_length: 0x48 [ 48.212494] fs/cifs/smb2misc.c: SMB2 data length 0 offset 72 [ 48.212919] fs/cifs/smb2misc.c: SMB2 len 77 [ 48.213364] fs/cifs/smb2misc.c: Calculated size 77 length 76 mismatch mid 2 [ 48.213807] fs/cifs/transport.c: cifs_sync_mid_result: cmd=1 mid=2 state=4 [ 48.214242] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.219385] fs/cifs/smb2pdu.c: SMB2/3 session established successfully [ 48.219831] fs/cifs/connect.c: CIFS VFS: leaving cifs_get_smb_ses (xid = 1) rc = 0 [ 48.220276] fs/cifs/connect.c: CIFS VFS: in cifs_get_tcon as Xid: 2 with uid: 0 [ 48.220724] fs/cifs/smb2pdu.c: TCON [ 48.221182] fs/cifs/transport.c: Sending smb: smb_len=122 [ 48.221830] fs/cifs/connect.c: RFC1002 header 0x50 [ 48.222280] fs/cifs/smb2misc.c: smb2_check_message length: 0x54, smb_buf_length: 0x50 [ 48.222734] fs/cifs/smb2misc.c: SMB2 len 84 [ 48.223199] fs/cifs/transport.c: cifs_sync_mid_result: cmd=3 mid=3 state=4 [ 48.223656] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.224107] fs/cifs/smb2pdu.c: connection to disk share [ 48.224560] fs/cifs/smb2pdu.c: validate negotiate [ 48.225015] fs/cifs/smb2pdu.c: SMB2 IOCTL [ 48.225456] fs/cifs/transport.c: Sending smb: smb_len=146 [ 48.226049] fs/cifs/connect.c: RFC1002 header 0x49 [ 48.226498] fs/cifs/smb2misc.c: smb2_check_message length: 0x4d, smb_buf_length: 0x49 [ 48.226951] fs/cifs/smb2misc.c: SMB2 data length 0 offset 0 [ 48.227408] fs/cifs/smb2misc.c: SMB2 len 77 [ 48.227863] fs/cifs/transport.c: cifs_sync_mid_result: cmd=11 mid=4 state=4 [ 48.228318] Status code returned 0xc0000022 STATUS_ACCESS_DENIED [ 48.228780] fs/cifs/smb2maperror.c: Mapping SMB2 status code -1073741790 to POSIX err -13 [ 48.229265] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.229732] CIFS VFS: validate protocol negotiate failed: -13 [ 48.230197] fs/cifs/connect.c: CIFS VFS: leaving cifs_get_tcon (xid = 2) rc = -5 [ 48.230681] fs/cifs/connect.c: Tcon rc = -5 [ 48.231150] fs/cifs/connect.c: build_unc_path_to_root: full_path=\\<ip_addr>\TestSMB [ 48.231634] fs/cifs/connect.c: cifs_put_smb_ses: ses_count=1 [ 48.232101] fs/cifs/connect.c: CIFS VFS: in cifs_put_smb_ses as Xid: 3 with uid: 0 [ 48.232569] fs/cifs/smb2pdu.c: disconnect session ffff8800b9189e00 [ 48.233053] fs/cifs/transport.c: Sending smb: smb_len=68 [ 48.233651] fs/cifs/connect.c: RFC1002 header 0x44 [ 48.234116] fs/cifs/smb2misc.c: smb2_check_message length: 0x48, smb_buf_length: 0x44 [ 48.234585] fs/cifs/smb2misc.c: SMB2 len 72 [ 48.235063] fs/cifs/transport.c: cifs_sync_mid_result: cmd=2 mid=5 state=4 [ 48.235541] SendRcvNoRsp flags 64 rc 0 [ 48.236075] fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 0) rc = -5 [ 48.236556] CIFS VFS: cifs_mount failed w/return code = -5 Any thoughts on what is the right fix for stable kernels? Mounting SMB3 shares works great on mainline (v4.15-rc5). It also works on 4.4.109 if I pass the sec=ntlmsspi option to the mount command (as opposed to the default: sec=ntlmssp). Please let me know if you need any other info. Thank you! Regards, Srivatsa

6 years, 9 months

5
21
0 0

[Linux-stable-mirror] [PATCH RESEND] rpmsg: virtio_rpmsg_bus: fix rpmsg_probe() for virtio-mmio transport

by Anup Patel

When virtio-rpmsg device is provided via virtio-mmio transport, the dma_alloc_coherent() (called by rpmsg_probe()) fails on ARM/ARM64 systems because "vdev->dev.parent->parent" device is used as parameter to dma_alloc_coherent(). The "vdev->dev.parent->parent" device represents underlying remoteproc platform device when virtio-rpmsg device is provided via virtio-remoteproc transport. When virtio-rpmsg device is provided via virtio-mmio transport, the "vdev->dev.parent->parent" device represents the parent device of virtio-mmio platform device and dma_alloc_coherent() fails for this device because generally there is no corresponding platform device and dma_ops are not setup for "vdev->dev.parent->parent". This patch fixes dma_alloc_coherent() usage in rpmsg_probe() by trying dma_alloc_coherent() with "vdev->dev.parent" device when it fails with "vdev->dev.parent->parent" device. Fixes: b5ab5e24e960 ("remoteproc: maintain a generic child device for each rproc") Signed-off-by: Anup Patel <anup(a)brainfault.org> Cc: stable(a)vger.kernel.org --- drivers/rpmsg/virtio_rpmsg_bus.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 82b8300..7f8710a 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -64,6 +64,7 @@ struct virtproc_info { struct virtio_device *vdev; struct virtqueue *rvq, *svq; + struct device *bufs_dev; void *rbufs, *sbufs; unsigned int num_bufs; unsigned int buf_size; @@ -924,9 +925,16 @@ static int rpmsg_probe(struct virtio_device *vdev) total_buf_space, &vrp->bufs_dma, GFP_KERNEL); if (!bufs_va) { - err = -ENOMEM; - goto vqs_del; - } + bufs_va = dma_alloc_coherent(vdev->dev.parent, + total_buf_space, &vrp->bufs_dma, + GFP_KERNEL); + if (!bufs_va) { + err = -ENOMEM; + goto vqs_del; + } else + vrp->bufs_dev = vdev->dev.parent; + } else + vrp->bufs_dev = vdev->dev.parent->parent; dev_dbg(&vdev->dev, "buffers: va %p, dma %pad\n", bufs_va, &vrp->bufs_dma); @@ -988,7 +996,7 @@ static int rpmsg_probe(struct virtio_device *vdev) return 0; free_coherent: - dma_free_coherent(vdev->dev.parent->parent, total_buf_space, + dma_free_coherent(vrp->bufs_dev, total_buf_space, bufs_va, vrp->bufs_dma); vqs_del: vdev->config->del_vqs(vrp->vdev); @@ -1023,7 +1031,7 @@ static void rpmsg_remove(struct virtio_device *vdev) vdev->config->del_vqs(vrp->vdev); - dma_free_coherent(vdev->dev.parent->parent, total_buf_space, + dma_free_coherent(vrp->bufs_dev, total_buf_space, vrp->rbufs, vrp->bufs_dma); kfree(vrp); -- 2.7.4

6 years, 9 months

2
5
0 0

[Linux-stable-mirror] [PATCH] Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version

by Hans de Goede

Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c. This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these. But there are 2 issues with this approach: 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices. 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync. This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem. This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device. This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: stable(a)vger.kernel.org Cc: Leif Liddy <leif.linux(a)gmail.com> Cc: Matthias Kaehlcke <mka(a)chromium.org> Cc: Brian Norris <briannorris(a)chromium.org> Cc: Daniel Drake <drake(a)endlessm.com> Cc: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- Note: 1) Once this has been merged, the 2 commits adding QCA device entries to drivers/usb/core/quirks.c should be reverted or dropped from bluetooth-next. 2) I don't have any of the affected devices, please test --- drivers/bluetooth/btusb.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4764100a5888..c4689f03220f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/usb.h> +#include <linux/usb/quirks.h> #include <linux/firmware.h> #include <linux/of_device.h> #include <linux/of_irq.h> @@ -388,9 +389,8 @@ static const struct usb_device_id blacklist_table[] = { #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 -#define BTUSB_RESET_RESUME 10 -#define BTUSB_DIAG_RUNNING 11 -#define BTUSB_OOB_WAKE_ENABLED 12 +#define BTUSB_DIAG_RUNNING 10 +#define BTUSB_OOB_WAKE_ENABLED 11 struct btusb_data { struct hci_dev *hdev; @@ -3118,6 +3118,12 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + + /* QCA Rome devices lose their updated firmware over suspend, + * but the USB hub doesn't notice any status change. + * explicitly request a device reset on resume. + */ + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #ifdef CONFIG_BT_HCIBTUSB_RTL @@ -3128,7 +3134,7 @@ static int btusb_probe(struct usb_interface *intf, * but the USB hub doesn't notice any status change. * Explicitly request a device reset on resume. */ - set_bit(BTUSB_RESET_RESUME, &data->flags); + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #endif @@ -3297,14 +3303,6 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message) enable_irq(data->oob_wake_irq); } - /* Optionally request a device reset on resume, but only when - * wakeups are disabled. If wakeups are enabled we assume the - * device will stay powered up throughout suspend. - */ - if (test_bit(BTUSB_RESET_RESUME, &data->flags) && - !device_may_wakeup(&data->udev->dev)) - data->udev->reset_resume = 1; - return 0; } -- 2.14.3

6 years, 9 months

6
24
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] tpm-dev-common: Reject too short writes" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ee70bc1e7b63ac8023c9ff9475d8741e397316e7 Mon Sep 17 00:00:00 2001 From: Alexander Steffen <Alexander.Steffen(a)infineon.com> Date: Fri, 8 Sep 2017 17:21:32 +0200 Subject: [PATCH] tpm-dev-common: Reject too short writes tpm_transmit() does not offer an explicit interface to indicate the number of valid bytes in the communication buffer. Instead, it relies on the commandSize field in the TPM header that is encoded within the buffer. Therefore, ensure that a) enough data has been written to the buffer, so that the commandSize field is present and b) the commandSize field does not announce more data than has been written to the buffer. This should have been fixed with CVE-2011-1161 long ago, but apparently a correct version of that patch never made it into the kernel. Cc: stable(a)vger.kernel.org Signed-off-by: Alexander Steffen <Alexander.Steffen(a)infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com> diff --git a/drivers/char/tpm/tpm-dev-common.c b/drivers/char/tpm/tpm-dev-common.c index 610638a80383..461bf0b8a094 100644 --- a/drivers/char/tpm/tpm-dev-common.c +++ b/drivers/char/tpm/tpm-dev-common.c @@ -110,6 +110,12 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf, return -EFAULT; } + if (in_size < 6 || + in_size < be32_to_cpu(*((__be32 *) (priv->data_buffer + 2)))) { + mutex_unlock(&priv->buffer_mutex); + return -EINVAL; + } + /* atomic tpm command send and result receive. We only hold the ops * lock during this period so that the tpm can be unregistered even if * the char dev is held open.

6 years, 9 months

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2018