When doing an atomic modeset with ALLOW_MODESET drivers are allowed to
pull in arbitrary other resources, including CRTCs (e.g. when
reconfiguring global resources).
But in nonblocking mode userspace has then no idea this happened,
which can lead to spurious EBUSY calls, both:
- when that other CRTC is currently busy doing a page_flip the
ALLOW_MODESET commit can fail with an EBUSY
- on the other CRTC a normal atomic flip can fail with EBUSY because
of the additional commit inserted by the kernel without userspace's
knowledge
For blocking commits this isn't a problem, because everyone else will
just block until all the CRTC are reconfigured. Only thing userspace
can notice is the dropped frames without any reason for why frames got
dropped.
Consensus is that we need new uapi to handle this properly, but no one
has any idea what exactly the new uapi should look like. As a stop-gap
plug this problem by demoting nonblocking commits which might cause
issues by including CRTCs not in the original request to blocking
commits.
v2: Add comments and a WARN_ON to enforce this only when allowed - we
don't want to silently convert page flips into blocking plane updates
just because the driver is buggy.
References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html
Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568
Cc: Daniel Stone <daniel(a)fooishbar.org>
Cc: Pekka Paalanen <pekka.paalanen(a)collabora.co.uk>
Cc: stable(a)vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter(a)intel.com>
---
drivers/gpu/drm/drm_atomic.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index d5cefb1cb2a2..058512f14772 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -2018,15 +2018,43 @@ EXPORT_SYMBOL(drm_atomic_commit);
int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
{
struct drm_mode_config *config = &state->dev->mode_config;
- int ret;
+ unsigned requested_crtc = 0;
+ unsigned affected_crtc = 0;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ bool nonblocking = true;
+ int ret, i;
+
+ /*
+ * For commits that allow modesets drivers can add other CRTCs to the
+ * atomic commit, e.g. when they need to reallocate global resources.
+ *
+ * But when userspace also requests a nonblocking commit then userspace
+ * cannot know that the commit affects other CRTCs, which can result in
+ * spurious EBUSY failures. Until we have better uapi plug this by
+ * demoting such commits to blocking mode.
+ */
+ for_each_new_crtc_in_state(state, crtc, crtc_state, i)
+ requested_crtc |= drm_crtc_mask(crtc);
ret = drm_atomic_check_only(state);
if (ret)
return ret;
- DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state);
+ for_each_new_crtc_in_state(state, crtc, crtc_state, i)
+ affected_crtc |= drm_crtc_mask(crtc);
+
+ if (affected_crtc != requested_crtc) {
+ /* adding other CRTC is only allowed for modeset commits */
+ WARN_ON(state->allow_modeset);
+
+ DRM_DEBUG_ATOMIC("demoting %p to blocking mode to avoid EBUSY\n", state);
+ nonblocking = false;
+ } else {
+ DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state);
+ }
- return config->funcs->atomic_commit(state->dev, state, true);
+ return config->funcs->atomic_commit(state->dev, state, nonblocking);
}
EXPORT_SYMBOL(drm_atomic_nonblocking_commit);
--
2.18.0
The premature free in the error path is blocked by V4L
refcounting, not USB refcounting. Thanks to
Ben Hutchings for review.
[v2] corrected attributions
Signed-off-by: Oliver Neukum <oneukum(a)suse.com>
Fixes: 50e704453553 ("media: usbtv: prevent double free in error case")
CC: stable(a)vger.kernel.org
Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk>
---
drivers/media/usb/usbtv/usbtv-core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c
index 5095c380b2c1..4a03c4d66314 100644
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -113,7 +113,8 @@ static int usbtv_probe(struct usb_interface *intf,
usbtv_audio_fail:
/* we must not free at this point */
- usb_get_dev(usbtv->udev);
+ v4l2_device_get(&usbtv->v4l2_dev);
+ /* this will undo the v4l2_device_get() */
usbtv_video_free(usbtv);
usbtv_video_fail:
--
2.13.6
Commit 9c8088c7988 ("i2c: i801: Don't restore config registers on
runtime PM") nullified the runtime PM suspend/resume callback pointers
while keeping the runtime PM enabled. This causes that device stays in
D0 power state and sysfs /sys/bus/pci/devices/.../power/runtime_status
shows "error" when runtime PM framework attempts to autosuspend the
device.
This is due PCI bus runtime PM which checks for driver runtime PM
callbacks and returns with -ENOSYS if they are not set. Fix this by
having a shared dummy runtime PM callback that returns with success.
Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
Reported-by: Mika Westerberg <mika.westerberg(a)linux.intel.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Jarkko Nikula <jarkko.nikula(a)linux.intel.com>
---
drivers/i2c/busses/i2c-i801.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa726607645e..3747484c2669 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1731,7 +1731,20 @@ static int i801_resume(struct device *dev)
}
#endif
-static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
+static int __maybe_unused i801_runtime_nop(struct device *dev)
+{
+ /*
+ * PCI core expects runtime PM suspend/resume callbacks return
+ * successfully before really suspending/resuming the device.
+ * Have a shared dummy callback that returns with success.
+ */
+ return 0;
+}
+
+static const struct dev_pm_ops i801_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(i801_suspend, i801_resume)
+ SET_RUNTIME_PM_OPS(i801_runtime_nop, i801_runtime_nop, NULL)
+};
static struct pci_driver i801_driver = {
.name = "i801_smbus",
--
2.18.0
fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.
Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.
Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin(a)virtuozzo.com>
Cc: <stable(a)vger.kernel.org>
---
fs/fuse/dev.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index c6b88fa85e2e..702592cce546 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1944,12 +1944,15 @@ static ssize_t fuse_dev_splice_write(struct pipe_inode_info *pipe,
if (!fud)
return -EPERM;
+ pipe_lock(pipe);
+
bufs = kmalloc_array(pipe->buffers, sizeof(struct pipe_buffer),
GFP_KERNEL);
- if (!bufs)
+ if (!bufs) {
+ pipe_unlock(pipe);
return -ENOMEM;
+ }
- pipe_lock(pipe);
nbuf = 0;
rem = 0;
for (idx = 0; idx < pipe->nrbufs && rem < len; idx++)
--
2.16.4
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 432061b3da64e488be3403124a72a9250bbe96d4 Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka(a)redhat.com>
Date: Wed, 5 Sep 2018 09:17:45 -0400
Subject: [PATCH] dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL
recursion deadlock
There's a XFS on dm-crypt deadlock, recursing back to itself due to the
crypto subsystems use of GFP_KERNEL, reported here:
https://bugzilla.kernel.org/show_bug.cgi?id=200835
* dm-crypt calls crypt_convert in xts mode
* init_crypt from xts.c calls kmalloc(GFP_KERNEL)
* kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem
tries to submit some bios and wait for them, causing a deadlock
Fix this by updating both the DM crypt and integrity targets to no
longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the
crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't
recurse into a filesystem. A GFP_ATOMIC allocation can fail, but
init_crypt() in xts.c handles the allocation failure gracefully - it
will fall back to preallocated buffer if the allocation fails.
The crypto API maintainer says that the crypto API only needs to
allocate memory when dealing with unaligned buffers and therefore
turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion:
https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html )
Cc: stable(a)vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com>
Signed-off-by: Mike Snitzer <snitzer(a)redhat.com>
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index f266c81f396f..0481223b1deb 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -332,7 +332,7 @@ static int crypt_iv_essiv_init(struct crypt_config *cc)
int err;
desc->tfm = essiv->hash_tfm;
- desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = 0;
err = crypto_shash_digest(desc, cc->key, cc->key_size, essiv->salt);
shash_desc_zero(desc);
@@ -606,7 +606,7 @@ static int crypt_iv_lmk_one(struct crypt_config *cc, u8 *iv,
int i, r;
desc->tfm = lmk->hash_tfm;
- desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = 0;
r = crypto_shash_init(desc);
if (r)
@@ -768,7 +768,7 @@ static int crypt_iv_tcw_whitening(struct crypt_config *cc,
/* calculate crc32 for every 32bit part and xor it */
desc->tfm = tcw->crc32_tfm;
- desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = 0;
for (i = 0; i < 4; i++) {
r = crypto_shash_init(desc);
if (r)
@@ -1251,7 +1251,7 @@ static void crypt_alloc_req_skcipher(struct crypt_config *cc,
* requests if driver request queue is full.
*/
skcipher_request_set_callback(ctx->r.req,
- CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
+ CRYPTO_TFM_REQ_MAY_BACKLOG,
kcryptd_async_done, dmreq_of_req(cc, ctx->r.req));
}
@@ -1268,7 +1268,7 @@ static void crypt_alloc_req_aead(struct crypt_config *cc,
* requests if driver request queue is full.
*/
aead_request_set_callback(ctx->r.req_aead,
- CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
+ CRYPTO_TFM_REQ_MAY_BACKLOG,
kcryptd_async_done, dmreq_of_req(cc, ctx->r.req_aead));
}
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 378878599466..89ccb64342de 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -532,7 +532,7 @@ static void section_mac(struct dm_integrity_c *ic, unsigned section, __u8 result
unsigned j, size;
desc->tfm = ic->journal_mac;
- desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+ desc->flags = 0;
r = crypto_shash_init(desc);
if (unlikely(r)) {
@@ -676,7 +676,7 @@ static void complete_journal_encrypt(struct crypto_async_request *req, int err)
static bool do_crypt(bool encrypt, struct skcipher_request *req, struct journal_completion *comp)
{
int r;
- skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP,
+ skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
complete_journal_encrypt, comp);
if (likely(encrypt))
r = crypto_skcipher_encrypt(req);
The mce handler for 'nfit' devices is called for memory errors on a
Non-Volatile DIMM, and adds the error location to a 'badblocks' list.
This list is used by the various NVDIMM drivers to avoid consuming known
poison locations during IO.
The mce handler gets called for both corrected and uncorrectable errors.
Until now, both kinds of errors have been added to the badblocks list.
However, corrected memory errors indicate that the problem has already
been fixed by hardware, and the resulting interrupt is merely a
notification to Linux. As far as future accesses to that location are
concerned, it is perfectly fine to use, and thus doesn't need to be
included in the above badblocks list.
Add a check in the nfit mce handler to filter out corrected mce events,
and only process uncorrectable errors.
Reported-by: Omar Avelar <omar.avelar(a)intel.com>
Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Cc: stable(a)vger.kernel.org
Cc: Dan Williams <dan.j.williams(a)intel.com>
Cc: Tony Luck <tony.luck(a)intel.com>
Cc: Borislav Petkov <bp(a)alien8.de>
Signed-off-by: Vishal Verma <vishal.l.verma(a)intel.com>
---
arch/x86/include/asm/mce.h | 1 +
arch/x86/kernel/cpu/mcheck/mce.c | 3 ++-
drivers/acpi/nfit/mce.c | 4 ++--
3 files changed, 5 insertions(+), 3 deletions(-)
v3: Unchanged from v2
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 3a17107594c8..3111b3cee2ee 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -216,6 +216,7 @@ static inline int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *s
int mce_available(struct cpuinfo_x86 *c);
bool mce_is_memory_error(struct mce *m);
+bool mce_is_correctable(struct mce *m);
DECLARE_PER_CPU(unsigned, mce_exception_count);
DECLARE_PER_CPU(unsigned, mce_poll_count);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 953b3ce92dcc..27015948bc41 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -534,7 +534,7 @@ bool mce_is_memory_error(struct mce *m)
}
EXPORT_SYMBOL_GPL(mce_is_memory_error);
-static bool mce_is_correctable(struct mce *m)
+bool mce_is_correctable(struct mce *m)
{
if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED)
return false;
@@ -544,6 +544,7 @@ static bool mce_is_correctable(struct mce *m)
return true;
}
+EXPORT_SYMBOL_GPL(mce_is_correctable);
static bool cec_add_mce(struct mce *m)
{
diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c
index e9626bf6ca29..7a51707f87e9 100644
--- a/drivers/acpi/nfit/mce.c
+++ b/drivers/acpi/nfit/mce.c
@@ -25,8 +25,8 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val,
struct acpi_nfit_desc *acpi_desc;
struct nfit_spa *nfit_spa;
- /* We only care about memory errors */
- if (!mce_is_memory_error(mce))
+ /* We only care about uncorrectable memory errors */
+ if (!mce_is_memory_error(mce) || mce_is_correctable(mce))
return NOTIFY_DONE;
/*
--
2.17.1
Dear Greg,
Commit ef86f3a7 (genirq/affinity: assign vectors to all possible CPUs) added
for Linux 4.14.56 causes the aacraid module to not detect the attached devices
anymore on a Dell PowerEdge R720 with two six core 24x E5-2630 @ 2.30GHz.
```
$ dmesg | grep raid
[ 0.269768] raid6: sse2x1 gen() 7179 MB/s
[ 0.290069] raid6: sse2x1 xor() 5636 MB/s
[ 0.311068] raid6: sse2x2 gen() 9160 MB/s
[ 0.332076] raid6: sse2x2 xor() 6375 MB/s
[ 0.353075] raid6: sse2x4 gen() 11164 MB/s
[ 0.374064] raid6: sse2x4 xor() 7429 MB/s
[ 0.379001] raid6: using algorithm sse2x4 gen() 11164 MB/s
[ 0.386001] raid6: .... xor() 7429 MB/s, rmw enabled
[ 0.391008] raid6: using ssse3x2 recovery algorithm
[ 3.559682] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.570061] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 10.725767] Adaptec aacraid driver 1.2.1[50834]-custom
[ 10.731724] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.743295] aacraid: Comm Interface type3 enabled
$ lspci -nn | grep Adaptec
04:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
42:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01)
```
But, it still works with a Dell PowerEdge R715 with two eight core AMD
Opteron 6136, the card below.
```
$ lspci -nn | grep Adaptec
22:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
```
Reverting the commit fixes the issue.
commit ef86f3a72adb8a7931f67335560740a7ad696d1d
Author: Christoph Hellwig <hch(a)lst.de>
Date: Fri Jan 12 10:53:05 2018 +0800
genirq/affinity: assign vectors to all possible CPUs
commit 84676c1f21e8ff54befe985f4f14dc1edc10046b upstream.
Currently we assign managed interrupt vectors to all present CPUs. This
works fine for systems were we only online/offline CPUs. But in case of
systems that support physical CPU hotplug (or the virtualized version of
it) this means the additional CPUs covered for in the ACPI tables or on
the command line are not catered for. To fix this we'd either need to
introduce new hotplug CPU states just for this case, or we can start
assining vectors to possible but not present CPUs.
Reported-by: Christian Borntraeger <borntraeger(a)de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger(a)de.ibm.com>
Tested-by: Stefan Haberland <sth(a)linux.vnet.ibm.com>
Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU")
Cc: linux-kernel(a)vger.kernel.org
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Signed-off-by: Christoph Hellwig <hch(a)lst.de>
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
The problem doesn’t happen with Linux 4.17.11, so there are commits in
Linux master fixing this. Unfortunately, my attempts to find out failed.
I was able to cherry-pick the three commits below on top of 4.14.62,
but the problem persists.
6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error
355d7ecdea35 scsi: hpsa: fix selection of reply queue
e944e9615741 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
Trying to cherry-pick the commits below, referencing the commit
in question, gave conflicts.
1. adbe552349f2 scsi: megaraid_sas: fix selection of reply queue
2. d3056812e7df genirq/affinity: Spread irq vectors among present CPUs as far as possible
To avoid further trial and error with the server with a slow firmware,
do you know what commits should fix the issue?
Kind regards,
Paul
PS: I couldn’t find, who suggested this for stable, that means how
it was picked to be added to stable. Is there an easy way to find
that out?
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From e4b069e0945fa14c71cf8b5b89f8b1b2aa68dbc2 Mon Sep 17 00:00:00 2001
From: Mikulas Patocka <mpatocka(a)redhat.com>
Date: Wed, 22 Aug 2018 12:45:51 -0400
Subject: [PATCH] dm verity: fix crash on bufio buffer that was allocated with
vmalloc
Since commit d1ac3ff008fb ("dm verity: switch to using asynchronous hash
crypto API") dm-verity uses asynchronous crypto calls for verification,
so that it can use hardware with asynchronous processing of crypto
operations.
These asynchronous calls don't support vmalloc memory, but the buffer data
can be allocated with vmalloc if dm-bufio is short of memory and uses a
reserved buffer that was preallocated in dm_bufio_client_create().
Fix verity_hash_update() so that it deals with vmalloc'd memory
correctly.
Reported-by: "Xiao, Jin" <jin.xiao(a)intel.com>
Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com>
Fixes: d1ac3ff008fb ("dm verity: switch to using asynchronous hash crypto API")
Cc: stable(a)vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer(a)redhat.com>
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index 12decdbd722d..fc65f0dedf7f 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -99,10 +99,26 @@ static int verity_hash_update(struct dm_verity *v, struct ahash_request *req,
{
struct scatterlist sg;
- sg_init_one(&sg, data, len);
- ahash_request_set_crypt(req, &sg, NULL, len);
-
- return crypto_wait_req(crypto_ahash_update(req), wait);
+ if (likely(!is_vmalloc_addr(data))) {
+ sg_init_one(&sg, data, len);
+ ahash_request_set_crypt(req, &sg, NULL, len);
+ return crypto_wait_req(crypto_ahash_update(req), wait);
+ } else {
+ do {
+ int r;
+ size_t this_step = min_t(size_t, len, PAGE_SIZE - offset_in_page(data));
+ flush_kernel_vmap_range((void *)data, this_step);
+ sg_init_table(&sg, 1);
+ sg_set_page(&sg, vmalloc_to_page(data), this_step, offset_in_page(data));
+ ahash_request_set_crypt(req, &sg, NULL, this_step);
+ r = crypto_wait_req(crypto_ahash_update(req), wait);
+ if (unlikely(r))
+ return r;
+ data += this_step;
+ len -= this_step;
+ } while (len);
+ return 0;
+ }
}
/*