From: Corentin Labbe <clabbe(a)baylibre.com>
[ Upstream commit 5f8208f557065163f9a8089ea2ea7888f9d96922 ]
Since commit d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add
AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed.
With the default setting, dldo3 is regulated at 2.9v which seems
sufficient for the PHY but the aforementioned commit drops it to 2.5V
which is insufficient. Note that this behaviour is random for all BPIM3.
Some work with 2.5V, but some don't.
Finnaly, someone from Bananapi confirmed that this regulator must be set
to 3.3V.
Fixes: d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813
regulator nodes")
Signed-off-by: Corentin Labbe <clabbe(a)baylibre.com>
[wens(a)csie.org: Reworked commit message]
Signed-off-by: Chen-Yu Tsai <wens(a)csie.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index c7ce4158d6c8..f250b20af493 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -309,8 +309,8 @@
®_dldo3 {
regulator-always-on;
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pd";
};
--
2.19.1
From: Tang Junhui <tang.junhui.linux(a)gmail.com>
Stale && dirty keys can be produced in the follow way:
After writeback in write_dirty_finish(), dirty keys k1 will
replace by clean keys k2
==>ret = bch_btree_insert(dc->disk.c, &keys, NULL, &w->key);
==>btree_insert_fn(struct btree_op *b_op, struct btree *b)
==>static int bch_btree_insert_node(struct btree *b,
struct btree_op *op,
struct keylist *insert_keys,
atomic_t *journal_ref,
Then two steps:
A) update k1 to k2 in btree node memory;
bch_btree_insert_keys(b, op, insert_keys, replace_key)
B) Write the bset(contains k2) to cache disk by a 30s delay work
bch_btree_leaf_dirty(b, journal_ref).
But before the 30s delay work write the bset to cache device,
these things happened:
A) GC works, and reclaim the bucket k2 point to;
B) Allocator works, and invalidate the bucket k2 point to,
and increase the gen of the bucket, and place it into free_inc
fifo;
C) Until now, the 30s delay work still does not finish work,
so in the disk, the key still is k1, it is dirty and stale
(its gen is smaller than the gen of the bucket). and then the
machine power off suddenly happens;
D) When the machine power on again, after the btree reconstruction,
the stale dirty key appear.
In bch_extent_bad(), when expensive_debug_checks is off, it would
treat the dirty key as good even it is stale keys, and it would
cause bellow probelms:
A) In read_dirty() it would cause machine crash:
BUG_ON(ptr_stale(dc->disk.c, &w->key, 0));
B) It could be worse when reads hits stale dirty keys, it would
read old incorrect data.
This patch tolerate the existence of these stale && dirty keys,
and treat them as bad key in bch_extent_bad().
(Coly Li: fix indent format which was modified by sender's email
client)
Signed-off-by: Tang Junhui <tang.junhui.linux(a)gmail.com>
Cc: stable(a)vger.kernel.org
Signed-off-by: Coly Li <colyli(a)suse.de>
---
drivers/md/bcache/extents.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/md/bcache/extents.c b/drivers/md/bcache/extents.c
index 956004366699..886710043025 100644
--- a/drivers/md/bcache/extents.c
+++ b/drivers/md/bcache/extents.c
@@ -538,6 +538,7 @@ static bool bch_extent_bad(struct btree_keys *bk, const struct bkey *k)
{
struct btree *b = container_of(bk, struct btree, keys);
unsigned int i, stale;
+ char buf[80];
if (!KEY_PTRS(k) ||
bch_extent_invalid(bk, k))
@@ -547,19 +548,19 @@ static bool bch_extent_bad(struct btree_keys *bk, const struct bkey *k)
if (!ptr_available(b->c, k, i))
return true;
- if (!expensive_debug_checks(b->c) && KEY_DIRTY(k))
- return false;
-
for (i = 0; i < KEY_PTRS(k); i++) {
stale = ptr_stale(b->c, k, i);
+ if (stale && KEY_DIRTY(k)) {
+ bch_extent_to_text(buf, sizeof(buf), k);
+ pr_info("stale dirty pointer, stale %u, key: %s",
+ stale, buf);
+ }
+
btree_bug_on(stale > BUCKET_GC_GEN_MAX, b,
"key too stale: %i, need_gc %u",
stale, b->c->need_gc);
- btree_bug_on(stale && KEY_DIRTY(k) && KEY_SIZE(k),
- b, "stale dirty pointer");
-
if (stale)
return true;
--
2.16.4