February 2018 - Linux-stable-mirror

Patch "net: phy: xgene: disable clk on error paths" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: xgene: disable clk on error paths to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-xgene-disable-clk-on-error-paths.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Date: Sat, 16 Dec 2017 00:52:39 +0300 Subject: net: phy: xgene: disable clk on error paths From: Alexey Khoroshilov <khoroshilov(a)ispras.ru> [ Upstream commit ab14436065c8066c265540312742390d6d07ddd2 ] There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov(a)ispras.ru> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/mdio-xgene.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -194,8 +194,11 @@ static int xgene_mdio_reset(struct xgene } ret = xgene_enet_ecc_init(pdata); - if (ret) + if (ret) { + if (pdata->dev->of_node) + clk_disable_unprepare(pdata->clk); return ret; + } xgene_gmac_reset(pdata); return 0; @@ -388,8 +391,10 @@ static int xgene_mdio_probe(struct platf return ret; mdio_bus = mdiobus_alloc(); - if (!mdio_bus) - return -ENOMEM; + if (!mdio_bus) { + ret = -ENOMEM; + goto out_clk; + } mdio_bus->name = "APM X-Gene MDIO bus"; @@ -418,7 +423,7 @@ static int xgene_mdio_probe(struct platf mdio_bus->phy_mask = ~0; ret = mdiobus_register(mdio_bus); if (ret) - goto out; + goto out_mdiobus; acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1, acpi_register_phy, NULL, mdio_bus, NULL); @@ -426,16 +431,20 @@ static int xgene_mdio_probe(struct platf } if (ret) - goto out; + goto out_mdiobus; pdata->mdio_bus = mdio_bus; xgene_mdio_status = true; return 0; -out: +out_mdiobus: mdiobus_free(mdio_bus); +out_clk: + if (dev->of_node) + clk_disable_unprepare(pdata->clk); + return ret; } Patches currently in stable-queue which might be from khoroshilov(a)ispras.ru are queue-4.14/net-phy-xgene-disable-clk-on-error-paths.patch

6 years, 3 months

1
0
0 0

Patch "net/mlx5e: Fix ETS BW check" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx5e: Fix ETS BW check to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx5e-fix-ets-bw-check.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Huy Nguyen <huyn(a)mellanox.com> Date: Thu, 26 Oct 2017 09:56:34 -0500 Subject: net/mlx5e: Fix ETS BW check From: Huy Nguyen <huyn(a)mellanox.com> [ Upstream commit ff0891915cd7b24ab27eee9b360c0452853bf9f6 ] Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh <moshe(a)mellanox.com> Reviewed-by: Huy Nguyen <huyn(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -259,6 +259,7 @@ int mlx5e_dcbnl_ieee_setets_core(struct static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, struct ieee_ets *ets) { + bool have_ets_tc = false; int bw_sum = 0; int i; @@ -273,11 +274,14 @@ static int mlx5e_dbcnl_validate_ets(stru } /* Validate Bandwidth Sum */ - for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) - if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) { + have_ets_tc = true; bw_sum += ets->tc_tx_bw[i]; + } + } - if (bw_sum != 0 && bw_sum != 100) { + if (have_ets_tc && bw_sum != 100) { netdev_err(netdev, "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; Patches currently in stable-queue which might be from huyn(a)mellanox.com are queue-4.14/net-mlx5e-fix-ets-bw-check.patch

6 years, 3 months

1
0
0 0

Patch "net/mlx5: Stay in polling mode when command EQ destroy fails" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx5: Stay in polling mode when command EQ destroy fails to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx5-stay-in-polling-mode-when-command-eq-destroy-fails.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Moshe Shemesh <moshe(a)mellanox.com> Date: Mon, 4 Dec 2017 15:23:51 +0200 Subject: net/mlx5: Stay in polling mode when command EQ destroy fails From: Moshe Shemesh <moshe(a)mellanox.com> [ Upstream commit a2fba188fd5eadd6061bef4f2f2577a43231ebf3 ] During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -802,11 +802,9 @@ void mlx5_stop_eqs(struct mlx5_core_dev mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) { + if (err) mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", err); - mlx5_cmd_use_events(dev); - } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, Patches currently in stable-queue which might be from moshe(a)mellanox.com are queue-4.14/net-mlx5e-fix-ets-bw-check.patch queue-4.14/net-mlx5-stay-in-polling-mode-when-command-eq-destroy-fails.patch queue-4.14/net-mlx5-cleanup-irqs-in-case-of-unload-failure.patch

6 years, 3 months

1
0
0 0

Patch "net/mlx5: Cleanup IRQs in case of unload failure" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx5: Cleanup IRQs in case of unload failure to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx5-cleanup-irqs-in-case-of-unload-failure.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Moshe Shemesh <moshe(a)mellanox.com> Date: Tue, 21 Nov 2017 15:15:51 +0200 Subject: net/mlx5: Cleanup IRQs in case of unload failure From: Moshe Shemesh <moshe(a)mellanox.com> [ Upstream commit d6b2785cd55ee72e9608762650b3ef299f801b1b ] When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 20 +++++++++++++------- include/linux/mlx5/driver.h | 2 +- 2 files changed, 14 insertions(+), 8 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -776,7 +776,7 @@ err1: return err; } -int mlx5_stop_eqs(struct mlx5_core_dev *dev) +void mlx5_stop_eqs(struct mlx5_core_dev *dev) { struct mlx5_eq_table *table = &dev->priv.eq_table; int err; @@ -785,22 +785,28 @@ int mlx5_stop_eqs(struct mlx5_core_dev * if (MLX5_CAP_GEN(dev, pg)) { err = mlx5_destroy_unmap_eq(dev, &table->pfault_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy page fault eq, err(%d)\n", + err); } #endif err = mlx5_destroy_unmap_eq(dev, &table->pages_eq); if (err) - return err; + mlx5_core_err(dev, "failed to destroy pages eq, err(%d)\n", + err); - mlx5_destroy_unmap_eq(dev, &table->async_eq); + err = mlx5_destroy_unmap_eq(dev, &table->async_eq); + if (err) + mlx5_core_err(dev, "failed to destroy async eq, err(%d)\n", + err); mlx5_cmd_use_polling(dev); err = mlx5_destroy_unmap_eq(dev, &table->cmd_eq); - if (err) + if (err) { + mlx5_core_err(dev, "failed to destroy command eq, err(%d)\n", + err); mlx5_cmd_use_events(dev); - - return err; + } } int mlx5_core_eq_query(struct mlx5_core_dev *dev, struct mlx5_eq *eq, --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -1017,7 +1017,7 @@ int mlx5_create_map_eq(struct mlx5_core_ enum mlx5_eq_type type); int mlx5_destroy_unmap_eq(struct mlx5_core_dev *dev, struct mlx5_eq *eq); int mlx5_start_eqs(struct mlx5_core_dev *dev); -int mlx5_stop_eqs(struct mlx5_core_dev *dev); +void mlx5_stop_eqs(struct mlx5_core_dev *dev); int mlx5_vector2eqn(struct mlx5_core_dev *dev, int vector, int *eqn, unsigned int *irqn); int mlx5_core_attach_mcg(struct mlx5_core_dev *dev, union ib_gid *mgid, u32 qpn); Patches currently in stable-queue which might be from moshe(a)mellanox.com are queue-4.14/net-mlx5e-fix-ets-bw-check.patch queue-4.14/net-mlx5-stay-in-polling-mode-when-command-eq-destroy-fails.patch queue-4.14/net-mlx5-cleanup-irqs-in-case-of-unload-failure.patch

6 years, 3 months

1
0
0 0

Patch "net: mediatek: setup proper state for disabled GMAC on the default" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: mediatek: setup proper state for disabled GMAC on the default to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mediatek-setup-proper-state-for-disabled-gmac-on-the-default.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Sean Wang <sean.wang(a)mediatek.com> Date: Mon, 18 Dec 2017 17:00:17 +0800 Subject: net: mediatek: setup proper state for disabled GMAC on the default From: Sean Wang <sean.wang(a)mediatek.com> [ Upstream commit 7352e252b5bf40d59342494a70354a2d436fd0cd ] The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang <sean.wang(a)mediatek.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1959,11 +1959,12 @@ static int mtk_hw_init(struct mtk_eth *e /* set GE2 TUNE */ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0); - /* GE1, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0)); - - /* GE2, Force 1000M/FD, FC ON */ - mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(1)); + /* Set linkdown as the default for each GMAC. Its own MCR would be set + * up with the more appropriate value when mtk_phy_link_adjust call is + * being invoked. + */ + for (i = 0; i < MTK_MAC_COUNT; i++) + mtk_w32(eth, 0, MTK_MAC_MCR(i)); /* Indicates CDM to parse the MTK special tag from CPU * which also is working out for untag packets. Patches currently in stable-queue which might be from sean.wang(a)mediatek.com are queue-4.14/net-mediatek-setup-proper-state-for-disabled-gmac-on-the-default.patch

6 years, 3 months

1
0
0 0

Patch "net: gianfar_ptp: move set_fipers() to spinlock protecting area" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: gianfar_ptp: move set_fipers() to spinlock protecting area to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Yangbo Lu <yangbo.lu(a)nxp.com> Date: Tue, 9 Jan 2018 11:02:33 +0800 Subject: net: gianfar_ptp: move set_fipers() to spinlock protecting area From: Yangbo Lu <yangbo.lu(a)nxp.com> [ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ] set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu(a)nxp.com> Acked-by: Richard Cochran <richardcochran(a)gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -319,11 +319,10 @@ static int ptp_gianfar_adjtime(struct pt now = tmr_cnt_read(etsects); now += delta; tmr_cnt_write(etsects, now); + set_fipers(etsects); spin_unlock_irqrestore(&etsects->lock, flags); - set_fipers(etsects); - return 0; } Patches currently in stable-queue which might be from yangbo.lu(a)nxp.com are queue-4.14/net-gianfar_ptp-move-set_fipers-to-spinlock-protecting-area.patch

6 years, 3 months

1
0
0 0

Patch "net: ena: unmask MSI-X only after device initialization is completed" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ena: unmask MSI-X only after device initialization is completed to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ena-unmask-msi-x-only-after-device-initialization-is-completed.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Netanel Belgazal <netanel(a)amazon.com> Date: Wed, 3 Jan 2018 06:17:29 +0000 Subject: net: ena: unmask MSI-X only after device initialization is completed From: Netanel Belgazal <netanel(a)amazon.com> [ Upstream commit 7853b49ce8e0ef6364d24512b287463841d71bd3 ] Under certain conditions MSI-X interrupt might arrive right after it was unmasked in ena_up(). There is a chance it would be processed by the driver before device ENA_FLAG_DEV_UP flag is set. In such a case the interrupt is ignored. ENA device operates in auto-masked mode, therefore ignoring interrupt leaves it masked for good. Moving unmask of interrupt to be the last step in ena_up(). Signed-off-by: Netanel Belgazal <netanel(a)amazon.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1565,7 +1565,7 @@ static int ena_rss_configure(struct ena_ static int ena_up_complete(struct ena_adapter *adapter) { - int rc, i; + int rc; rc = ena_rss_configure(adapter); if (rc) @@ -1584,17 +1584,6 @@ static int ena_up_complete(struct ena_ad ena_napi_enable_all(adapter); - /* Enable completion queues interrupt */ - for (i = 0; i < adapter->num_queues; i++) - ena_unmask_interrupt(&adapter->tx_ring[i], - &adapter->rx_ring[i]); - - /* schedule napi in case we had pending packets - * from the last time we disable napi - */ - for (i = 0; i < adapter->num_queues; i++) - napi_schedule(&adapter->ena_napi[i].napi); - return 0; } @@ -1731,7 +1720,7 @@ create_err: static int ena_up(struct ena_adapter *adapter) { - int rc; + int rc, i; netdev_dbg(adapter->netdev, "%s\n", __func__); @@ -1774,6 +1763,17 @@ static int ena_up(struct ena_adapter *ad set_bit(ENA_FLAG_DEV_UP, &adapter->flags); + /* Enable completion queues interrupt */ + for (i = 0; i < adapter->num_queues; i++) + ena_unmask_interrupt(&adapter->tx_ring[i], + &adapter->rx_ring[i]); + + /* schedule napi in case we had pending packets + * from the last time we disable napi + */ + for (i = 0; i < adapter->num_queues; i++) + napi_schedule(&adapter->ena_napi[i].napi); + return rc; err_up: Patches currently in stable-queue which might be from netanel(a)amazon.com are queue-4.14/net-ena-unmask-msi-x-only-after-device-initialization-is-completed.patch

6 years, 3 months

1
0
0 0

Patch "net: arc_emac: fix arc_emac_rx() error paths" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: arc_emac: fix arc_emac_rx() error paths to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-arc_emac-fix-arc_emac_rx-error-paths.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Alexander Kochetkov <al.kochet(a)gmail.com> Date: Fri, 15 Dec 2017 20:20:06 +0300 Subject: net: arc_emac: fix arc_emac_rx() error paths From: Alexander Kochetkov <al.kochet(a)gmail.com> [ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ] arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-) --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -210,39 +210,48 @@ static int arc_emac_rx(struct net_device continue; } - pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; } - /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE); Patches currently in stable-queue which might be from al.kochet(a)gmail.com are queue-4.14/net-arc_emac-fix-arc_emac_rx-error-paths.patch

6 years, 3 months

1
0
0 0

Patch "net: aquantia: Fix hardware DMA stream overload on large MRRS" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: aquantia: Fix hardware DMA stream overload on large MRRS to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-aquantia-fix-hardware-dma-stream-overload-on-large-mrrs.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Igor Russkikh <igor.russkikh(a)aquantia.com> Date: Thu, 14 Dec 2017 12:34:41 +0300 Subject: net: aquantia: Fix hardware DMA stream overload on large MRRS From: Igor Russkikh <igor.russkikh(a)aquantia.com> [ Upstream commit 1e366161510f266516107a69db91f1f2edaea11c ] Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous <pavel.belous(a)aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh(a)aquantia.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 12 ++++++++++ drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h | 6 +++++ 2 files changed, 18 insertions(+) --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -16,6 +16,7 @@ #include "hw_atl_utils.h" #include "hw_atl_llh.h" #include "hw_atl_b0_internal.h" +#include "hw_atl_llh_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, struct aq_hw_caps_s *aq_hw_caps, @@ -368,6 +369,7 @@ static int hw_atl_b0_hw_init(struct aq_h }; int err = 0; + u32 val; self->aq_nic_cfg = aq_nic_cfg; @@ -385,6 +387,16 @@ static int hw_atl_b0_hw_init(struct aq_h hw_atl_b0_hw_rss_set(self, &aq_nic_cfg->aq_rss); hw_atl_b0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss); + /* Force limit MRRS on RDM/TDM to 2K */ + val = aq_hw_read_reg(self, pci_reg_control6_adr); + aq_hw_write_reg(self, pci_reg_control6_adr, (val & ~0x707) | 0x404); + + /* TX DMA total request limit. B0 hardware is not capable to + * handle more than (8K-MRRS) incoming DMA data. + * Value 24 in 256byte units + */ + aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24); + err = aq_hw_err_from_flags(self); if (err < 0) goto err_exit; --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -2343,6 +2343,9 @@ #define tx_dma_desc_base_addrmsw_adr(descriptor) \ (0x00007c04u + (descriptor) * 0x40) +/* tx dma total request limit */ +#define tx_dma_total_req_limit_adr 0x00007b20u + /* tx interrupt moderation control register definitions * Preprocessor definitions for TX Interrupt Moderation Control Register * Base Address: 0x00008980 @@ -2369,6 +2372,9 @@ /* default value of bitfield reg_res_dsbl */ #define pci_reg_res_dsbl_default 0x1 +/* PCI core control register */ +#define pci_reg_control6_adr 0x1014u + /* global microprocessor scratch pad definitions */ #define glb_cpu_scratch_scp_adr(scratch_scp) (0x00000300u + (scratch_scp) * 0x4) Patches currently in stable-queue which might be from igor.russkikh(a)aquantia.com are queue-4.14/net-aquantia-fix-actual-speed-capabilities-reporting.patch queue-4.14/net-aquantia-fix-hardware-dma-stream-overload-on-large-mrrs.patch

6 years, 3 months

1
0
0 0

Patch "net: aquantia: Fix actual speed capabilities reporting" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: aquantia: Fix actual speed capabilities reporting to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-aquantia-fix-actual-speed-capabilities-reporting.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Igor Russkikh <igor.russkikh(a)aquantia.com> Date: Thu, 14 Dec 2017 12:34:40 +0300 Subject: net: aquantia: Fix actual speed capabilities reporting From: Igor Russkikh <igor.russkikh(a)aquantia.com> [ Upstream commit e4d02ca04c6d48ab2226342a1c4ed54f1dbb72bd ] Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh <igor.russkikh(a)aquantia.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 4 +++- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 7 ++++--- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c | 5 +++-- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 13 ++++++++++++- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 13 ++++++++++++- 6 files changed, 35 insertions(+), 9 deletions(-) --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -85,7 +85,9 @@ struct aq_hw_ops { void (*destroy)(struct aq_hw_s *self); int (*get_hw_caps)(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps); + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device); int (*hw_ring_tx_xmit)(struct aq_hw_s *self, struct aq_ring_s *aq_ring, unsigned int frags); --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -222,7 +222,7 @@ static struct net_device *aq_nic_ndev_al struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops) @@ -242,7 +242,7 @@ struct aq_nic_s *aq_nic_alloc_cold(const ndev->netdev_ops = ndev_ops; ndev->ethtool_ops = et_ops; - SET_NETDEV_DEV(ndev, dev); + SET_NETDEV_DEV(ndev, &pdev->dev); ndev->if_port = port; self->ndev = ndev; @@ -254,7 +254,8 @@ struct aq_nic_s *aq_nic_alloc_cold(const self->aq_hw = self->aq_hw_ops.create(aq_pci_func, self->port, &self->aq_hw_ops); - err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps); + err = self->aq_hw_ops.get_hw_caps(self->aq_hw, &self->aq_hw_caps, + pdev->device, pdev->subsystem_device); if (err < 0) goto err_exit; --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -71,7 +71,7 @@ struct aq_nic_cfg_s { struct aq_nic_s *aq_nic_alloc_cold(const struct net_device_ops *ndev_ops, const struct ethtool_ops *et_ops, - struct device *dev, + struct pci_dev *pdev, struct aq_pci_func_s *aq_pci_func, unsigned int port, const struct aq_hw_ops *aq_hw_ops); --- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c @@ -51,7 +51,8 @@ struct aq_pci_func_s *aq_pci_func_alloc( pci_set_drvdata(pdev, self); self->pdev = pdev; - err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps); + err = aq_hw_ops->get_hw_caps(NULL, &self->aq_hw_caps, pdev->device, + pdev->subsystem_device); if (err < 0) goto err_exit; @@ -59,7 +60,7 @@ struct aq_pci_func_s *aq_pci_func_alloc( for (port = 0; port < self->ports; ++port) { struct aq_nic_s *aq_nic = aq_nic_alloc_cold(ndev_ops, eth_ops, - &pdev->dev, self, + pdev, self, port, aq_hw_ops); if (!aq_nic) { --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -18,9 +18,20 @@ #include "hw_atl_a0_internal.h" static int hw_atl_a0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_a0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_A0_RATE_5G; + } + return 0; } --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -18,9 +18,20 @@ #include "hw_atl_b0_internal.h" static int hw_atl_b0_get_hw_caps(struct aq_hw_s *self, - struct aq_hw_caps_s *aq_hw_caps) + struct aq_hw_caps_s *aq_hw_caps, + unsigned short device, + unsigned short subsystem_device) { memcpy(aq_hw_caps, &hw_atl_b0_hw_caps_, sizeof(*aq_hw_caps)); + + if (device == HW_ATL_DEVICE_ID_D108 && subsystem_device == 0x0001) + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + + if (device == HW_ATL_DEVICE_ID_D109 && subsystem_device == 0x0001) { + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_10G; + aq_hw_caps->link_speed_msk &= ~HW_ATL_B0_RATE_5G; + } + return 0; } Patches currently in stable-queue which might be from igor.russkikh(a)aquantia.com are queue-4.14/net-aquantia-fix-actual-speed-capabilities-reporting.patch queue-4.14/net-aquantia-fix-hardware-dma-stream-overload-on-large-mrrs.patch

6 years, 3 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2018