February 2018 - Linux-stable-mirror

[Linux-stable-mirror] [PATCH] mm/kasan: Don't vfree() nonexistent vm_area.

by Andrey Ryabinin

KASAN uses different routines to map shadow for hot added memory and memory obtained in boot process. Attempt to offline memory onlined by normal boot process leads to this: Trying to vfree() nonexistent vm area (000000005d3b34b9) WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190 Call Trace: kasan_mem_notifier+0xad/0xb9 notifier_call_chain+0x166/0x260 __blocking_notifier_call_chain+0xdb/0x140 __offline_pages+0x96a/0xb10 memory_subsys_offline+0x76/0xc0 device_offline+0xb8/0x120 store_mem_state+0xfa/0x120 kernfs_fop_write+0x1d5/0x320 __vfs_write+0xd4/0x530 vfs_write+0x105/0x340 SyS_write+0xb0/0x140 Obviously we can't call vfree() to free memory that wasn't allocated via vmalloc(). Use find_vm_area() to see if we can call vfree(). Unfortunately it's a bit tricky to properly unmap and free shadow allocated during boot, so we'll have to keep it. If memory will come online again that shadow will be reused. Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Reported-by: Paul Menzel <pmenzel+linux-kasan-dev(a)molgen.mpg.de> Signed-off-by: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: <stable(a)vger.kernel.org> --- mm/kasan/kasan.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 55 insertions(+), 2 deletions(-) diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c index e13d911251e7..0d9d9d268f32 100644 --- a/mm/kasan/kasan.c +++ b/mm/kasan/kasan.c @@ -791,6 +791,41 @@ DEFINE_ASAN_SET_SHADOW(f5); DEFINE_ASAN_SET_SHADOW(f8); #ifdef CONFIG_MEMORY_HOTPLUG +static bool shadow_mapped(unsigned long addr) +{ + pgd_t *pgd = pgd_offset_k(addr); + p4d_t *p4d; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + if (pgd_none(*pgd)) + return false; + p4d = p4d_offset(pgd, addr); + if (p4d_none(*p4d)) + return false; + pud = pud_offset(p4d, addr); + if (pud_none(*pud)) + return false; + + /* + * We can't use pud_large() or pud_huge(), the first one + * is arch-specific, the last one depend on HUGETLB_PAGE. + * So let's abuse pud_bad(), if bud is bad it's has to + * because it's huge. + */ + if (pud_bad(*pud)) + return true; + pmd = pmd_offset(pud, addr); + if (pmd_none(*pmd)) + return false; + + if (pmd_bad(*pmd)) + return true; + pte = pte_offset_kernel(pmd, addr); + return !pte_none(*pte); +} + static int __meminit kasan_mem_notifier(struct notifier_block *nb, unsigned long action, void *data) { @@ -812,6 +847,14 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb, case MEM_GOING_ONLINE: { void *ret; + /* + * If shadow is mapped already than it must have been mapped + * during the boot. This could happen if we onlining previously + * offlined memory. + */ + if (shadow_mapped(shadow_start)) + return NOTIFY_OK; + ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start, shadow_end, GFP_KERNEL, PAGE_KERNEL, VM_NO_GUARD, @@ -823,8 +866,18 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb, kmemleak_ignore(ret); return NOTIFY_OK; } - case MEM_OFFLINE: - vfree((void *)shadow_start); + case MEM_OFFLINE: { + struct vm_struct *vm; + + /* + * Only hot-added memory have vm_area. Freeing shadow + * mapped during boot would be tricky, so we'll just + * have to keep it. + */ + vm = find_vm_area((void *)shadow_start); + if (vm) + vfree((void *)shadow_start); + } } return NOTIFY_OK; -- 2.13.6

5 years, 10 months

5
12
0 0

[PATCH 5/7] ext4: pass -ESHUTDOWN code to jbd2 layer

by Theodore Ts'o

Previously the jbd2 layer assumed that a file system check would be required after a journal abort. In the case of the deliberate file system shutdown, this should not be necessary. Allow the jbd2 layer to distinguish between these two cases by using the ESHUTDOWN errno. Also add proper locking to __journal_abort_soft(). Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)vger.kernel.org --- fs/ext4/ioctl.c | 4 ++-- fs/jbd2/journal.c | 25 +++++++++++++++++++------ 2 files changed, 21 insertions(+), 8 deletions(-) diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c index 16d3d1325f5b..9ac33a7cbd32 100644 --- a/fs/ext4/ioctl.c +++ b/fs/ext4/ioctl.c @@ -493,13 +493,13 @@ static int ext4_shutdown(struct super_block *sb, unsigned long arg) set_bit(EXT4_FLAGS_SHUTDOWN, &sbi->s_ext4_flags); if (sbi->s_journal && !is_journal_aborted(sbi->s_journal)) { (void) ext4_force_commit(sb); - jbd2_journal_abort(sbi->s_journal, 0); + jbd2_journal_abort(sbi->s_journal, -ESHUTDOWN); } break; case EXT4_GOING_FLAGS_NOLOGFLUSH: set_bit(EXT4_FLAGS_SHUTDOWN, &sbi->s_ext4_flags); if (sbi->s_journal && !is_journal_aborted(sbi->s_journal)) - jbd2_journal_abort(sbi->s_journal, 0); + jbd2_journal_abort(sbi->s_journal, -ESHUTDOWN); break; default: return -EINVAL; diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 3fbf48ec2188..efa0c72a0b9f 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1483,12 +1483,15 @@ static void jbd2_mark_journal_empty(journal_t *journal, int write_op) void jbd2_journal_update_sb_errno(journal_t *journal) { journal_superblock_t *sb = journal->j_superblock; + int errcode; read_lock(&journal->j_state_lock); - jbd_debug(1, "JBD2: updating superblock error (errno %d)\n", - journal->j_errno); - sb->s_errno = cpu_to_be32(journal->j_errno); + errcode = journal->j_errno; read_unlock(&journal->j_state_lock); + if (errcode == -ESHUTDOWN) + errcode = 0; + jbd_debug(1, "JBD2: updating superblock error (errno %d)\n", errcode); + sb->s_errno = cpu_to_be32(errcode); jbd2_write_superblock(journal, REQ_SYNC | REQ_FUA); } @@ -2105,12 +2108,22 @@ void __jbd2_journal_abort_hard(journal_t *journal) * but don't do any other IO. */ static void __journal_abort_soft (journal_t *journal, int errno) { - if (journal->j_flags & JBD2_ABORT) - return; + int old_errno; - if (!journal->j_errno) + write_lock(&journal->j_state_lock); + old_errno = journal->j_errno; + if (!journal->j_errno || errno == -ESHUTDOWN) journal->j_errno = errno; + if (journal->j_flags & JBD2_ABORT) { + write_unlock(&journal->j_state_lock); + if (!old_errno && old_errno != -ESHUTDOWN && + errno == -ESHUTDOWN) + jbd2_journal_update_sb_errno(journal); + return; + } + write_unlock(&journal->j_state_lock); + __jbd2_journal_abort_hard(journal); if (errno) { -- 2.16.1.72.g5be1f00a9a

5 years, 11 months

3
3
0 0

[PATCH 4.9 000/145] 4.9.84-stable review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.9.84 release. There are 145 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sun Feb 25 17:06:27 UTC 2018. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.84-rc1… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.9.84-rc1 Kamil Konieczny <k.konieczny(a)partner.samsung.com> crypto: s5p-sss - Fix kernel Oops in AES-ECB mode Jan Dakinevich <jan.dakinevich(a)gmail.com> KVM: nVMX: invvpid handling improvements Jan Dakinevich <jan.dakinevich(a)gmail.com> KVM: VMX: clean up declaration of VPID/EPT invalidation types Wanpeng Li <wanpeng.li(a)hotmail.com> KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously Borislav Petkov <bp(a)suse.de> x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug Arnd Bergmann <arnd(a)arndb.de> usb: phy: msm add regulator dependency Arnd Bergmann <arnd(a)arndb.de> arm64: fix warning about swapper_pg_dir overflow Arnd Bergmann <arnd(a)arndb.de> idle: i7300: add PCI dependency Arnd Bergmann <arnd(a)arndb.de> spi: bcm-qspi: shut up warning about cfi header inclusion Arnd Bergmann <arnd(a)arndb.de> binfmt_elf: compat: avoid unused function warning Arnd Bergmann <arnd(a)arndb.de> arm64: sunxi: always enable reset controller Arnd Bergmann <arnd(a)arndb.de> drm/i915: hide unused intel_panel_set_backlight function Arnd Bergmann <arnd(a)arndb.de> kasan: rework Kconfig settings Tobias Regnery <tobias.regnery(a)gmail.com> clk: meson: gxbb: fix build error without RESET_CONTROLLER Arnd Bergmann <arnd(a)arndb.de> ISDN: eicon: reduce stack size of sig_ind function Arnd Bergmann <arnd(a)arndb.de> tw5864: use dev_warn instead of WARN to shut up warning Arnd Bergmann <arnd(a)arndb.de> em28xx: only use mt9v011 if camera support is enabled Arnd Bergmann <arnd(a)arndb.de> go7007: add MEDIA_CAMERA_SUPPORT dependency Arnd Bergmann <arnd(a)arndb.de> tc358743: fix register i2c_rd/wr functions Jérémy Lefaure <jeremy.lefaure(a)lse.epita.fr> shmem: fix compilation warnings on unused functions Arnd Bergmann <arnd(a)arndb.de> KVM: add X86_LOCAL_APIC dependency Arnd Bergmann <arnd(a)arndb.de> Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> drm/nouveau: hide gcc-4.9 -Wmaybe-uninitialized Ilya Dryomov <idryomov(a)gmail.com> rbd: silence bogus -Wmaybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> drm: exynos: mark pm functions as __maybe_unused Arnd Bergmann <arnd(a)arndb.de> security/keys: BIG_KEY requires CONFIG_CRYPTO Arnd Bergmann <arnd(a)arndb.de> cw1200: fix bogus maybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> reiserfs: avoid a -Wmaybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> ALSA: hda/ca0132 - fix possible NULL pointer use Kefeng Wang <wangkefeng.wang(a)huawei.com> arm64: Kconfig: select COMPAT_BINFMT_ELF only when BINFMT_ELF is set Arnd Bergmann <arnd(a)arndb.de> scsi: advansys: fix uninitialized data access Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> x86/vm86: Fix unused variable warning if THP is disabled Arnd Bergmann <arnd(a)arndb.de> x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG Jun Nie <jun.nie(a)linaro.org> dmaengine: zx: fix build warning Arnd Bergmann <arnd(a)arndb.de> x86: add MULTIUSER dependency for KVM Arnd Bergmann <arnd(a)arndb.de> thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies Arnd Bergmann <arnd(a)arndb.de> x86/build: Silence the build with "make -s" Josh Poimboeuf <jpoimboe(a)redhat.com> tools build: Add tools tree support for 'make -s' Arnd Bergmann <arnd(a)arndb.de> x86/fpu/math-emu: Fix possible uninitialized variable use Arnd Bergmann <arnd(a)arndb.de> arm64: define BUG() instruction without CONFIG_BUG Arnd Bergmann <arnd(a)arndb.de> gpio: xgene: mark PM functions as __maybe_unused Borislav Petkov <bp(a)suse.de> x86/ras/inject: Make it depend on X86_LOCAL_APIC=y Arnd Bergmann <arnd(a)arndb.de> scsi: advansys: fix build warning for PCI=n Arnd Bergmann <arnd(a)arndb.de> video: fbdev: via: remove possibly unused variables Stephen Boyd <sboyd(a)codeaurora.org> perf: xgene: Include module.h Marc Gonzalez <marc_gonzalez(a)sigmadesigns.com> PCI: Change pci_host_common_probe() visibility Jérémy Lefaure <jeremy.lefaure(a)lse.epita.fr> usb: musb: fix compilation warning on unused function Borislav Petkov <bp(a)suse.de> platform/x86: intel_mid_thermal: Fix suspend handlers unused warning Augusto Mecking Caringi <augustocaringi(a)gmail.com> gpio: intel-mid: Fix build warning when !CONFIG_PM Borislav Petkov <bp(a)suse.de> PCI: vmd: Fix suspend handlers defined-but-not-used warning Arnd Bergmann <arnd(a)arndb.de> perf/x86: Shut up false-positive -Wmaybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> vmxnet3: prevent building with 64K pages Tobias Regnery <tobias.regnery(a)gmail.com> clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER Arnd Bergmann <arnd(a)arndb.de> shmem: avoid maybe-uninitialized warning Arnd Bergmann <arnd(a)arndb.de> drm/i915: fix intel_backlight_device_register declaration LEROY Christophe <christophe.leroy(a)c-s.fr> crypto: talitos - fix Kernel Oops on hashing an empty file Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Improve RFI L1-D cache flush fallback Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Simple RFI macro conversions Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Fix conversion of slb_miss_common to use RFI_TO_USER/KERNEL Jia-Ju Bai <baijiaju1990(a)163.com> hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close Jan Beulich <JBeulich(a)suse.com> xen: XEN_ACPI_PROCESSOR is Dom0-only Pali Rohár <pali.rohar(a)gmail.com> platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410 Karol Herbst <kherbst(a)redhat.com> x86/mm/kmmio: Fix mmiotrace for page unaligned addresses Dave Young <dyoung(a)redhat.com> mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep Andreas Platschek <andreas.platschek(a)opentech.at> usb: dwc3: of-simple: fix missing clk_disable_unprepare Vincent Pelletier <plr.vincent(a)gmail.com> usb: dwc3: gadget: Wait longer for controller to end command processing Tobias Jordan <Tobias.Jordan(a)elektrobit.com> dmaengine: jz4740: disable/unprepare clk if probe fails Russell King <rmk+kernel(a)armlinux.org.uk> drm/armada: fix leak of crtc structure Steffen Klassert <steffen.klassert(a)secunet.com> xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies. Takuo Koguchi <takuo.koguchi(a)gmail.com> spi: sun4i: disable clocks in the remove function Stefan Potyra <Stefan.Potyra(a)elektrobit.com> ASoC: rockchip: disable clock on error Cai Li <cai.li(a)spreadtrum.com> clk: fix a panic error caused by accessing NULL pointer Gustavo A. R. Silva <garsilva(a)embeddedor.com> dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> dmaengine: ioat: Fix error handling path Claudiu Manoil <claudiu.manoil(a)nxp.com> gianfar: Disable EEE autoneg by default Eric Biggers <ebiggers3(a)gmail.com> 509: fix printing uninitialized stack memory when OID is empty Branislav Radocaj <branislav(a)radocaj.org> net: ethernet: arc: fix error handling in emac_rockchip_probe Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> brcmfmac: Avoid build error with make W=1 Nikolay Borisov <nborisov(a)suse.com> btrfs: Fix possible off-by-one in btrfs_search_path_in_tree Nogah Frankel <nogahf(a)mellanox.com> net_sched: red: Avoid illegal values Nogah Frankel <nogahf(a)mellanox.com> net_sched: red: Avoid devision by zero Zumeng Chen <zumeng.chen(a)gmail.com> gianfar: fix a flooded alignment reports because of padding issue. Tony Lindgren <tony(a)atomide.com> ARM: dts: Fix elm interrupt compiler warning Stefan Haberland <sth(a)linux.vnet.ibm.com> s390/dasd: prevent prefix I/O error Ravi Bangoria <ravi.bangoria(a)linux.vnet.ibm.com> powerpc/perf: Fix oops when grouping different pmu events Greg Ungerer <gerg(a)linux-m68k.org> m68k: add missing SOFTIRQENTRY_TEXT linker section Gao Feng <gfree.wind(a)vip.163.com> ipvlan: Add the skb->mark as flow4's member to lookup route Will Deacon <will.deacon(a)arm.com> scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none Xin Long <lucien.xin(a)gmail.com> sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune Moni Shoua <monis(a)mellanox.com> RDMA/cma: Make sure that PSN is not over max allowed Mustafa Ismail <mustafa.ismail(a)intel.com> i40iw: Correct ARP index mask Andre Przywara <andre.przywara(a)arm.com> pinctrl: sunxi: Fix A64 UART mux value Andre Przywara <andre.przywara(a)arm.com> pinctrl: sunxi: Fix A80 interrupt pin bank Mauro Carvalho Chehab <mchehab(a)kernel.org> media: s5k6aa: describe some function parameters Satheesh Rajendran <sathnaga(a)linux.vnet.ibm.com> perf bench numa: Fixup discontiguous/sparse numa nodes Jiri Olsa <jolsa(a)kernel.org> perf top: Fix window dimensions change handling Peter Ujfalusi <peter.ujfalusi(a)ti.com> ARM: dts: am437x-cm-t43: Correct the dmas property of spi0 Peter Ujfalusi <peter.ujfalusi(a)ti.com> ARM: dts: am4372: Correct the interrupts_properties of McASP Adam Ford <aford173(a)gmail.com> ARM: dts: logicpd-somlv: Fix wl127x pinmux Adam Ford <aford173(a)gmail.com> ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet Tony Lindgren <tony(a)atomide.com> ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen Keerthy <j-keerthy(a)ti.com> ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function Tony Lindgren <tony(a)atomide.com> ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context Randy Dunlap <rdunlap(a)infradead.org> usb: build drivers/usb/common/ when USB_SUPPORT is set Shuah Khan <shuah(a)kernel.org> usbip: keep usbip_device sockfd state in sync with tcp_socket Alexandru Ardelean <alexandru.ardelean(a)analog.com> staging: iio: ad5933: switch buffer mode to software Alexandru Ardelean <alexandru.ardelean(a)analog.com> staging: iio: adc: ad7192: fix external frequency setting Eric Biggers <ebiggers(a)google.com> binder: check for binder_thread allocation failure in binder_poll() Ben Hutchings <ben(a)decadent.org.uk> staging: android: ashmem: Fix a race condition in pin ioctls Paolo Abeni <pabeni(a)redhat.com> dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock Arnd Bergmann <arnd(a)arndb.de> arm64: dts: add #cooling-cells to CPU nodes Arnd Bergmann <arnd(a)arndb.de> ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag Arnd Bergmann <arnd(a)arndb.de> video: fbdev/mmp: add MODULE_LICENSE Arnd Bergmann <arnd(a)arndb.de> ASoC: ux500: add MODULE_LICENSE tag Eric Biggers <ebiggers(a)google.com> crypto: hash - prevent using keyed hashes without setting key Eric Biggers <ebiggers(a)google.com> crypto: hash - annotate algorithms taking optional key Willem de Bruijn <willemb(a)google.com> net: avoid skb_warn_bad_offload on IS_ERR Sowmini Varadhan <sowmini.varadhan(a)oracle.com> rds: tcp: atomically purge entries from rds_tcp_conn_list during netns delete Cong Wang <xiyou.wangcong(a)gmail.com> netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert Cong Wang <xiyou.wangcong(a)gmail.com> netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1() Paolo Abeni <pabeni(a)redhat.com> netfilter: on sockopt() acquire sock lock only in the required scope Dmitry Vyukov <dvyukov(a)google.com> netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check() Eric Dumazet <edumazet(a)google.com> netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target} Dmitry Vyukov <dvyukov(a)google.com> netfilter: x_tables: fix int overflow in xt_alloc_table_info() Dmitry Vyukov <dvyukov(a)google.com> kcov: detect double association with a single task Wanpeng Li <wanpeng.li(a)hotmail.com> KVM: x86: fix escape of guest dr6 to the host Douglas Gilbert <dgilbert(a)interlog.com> blk_rq_map_user_iov: fix error override Laura Abbott <labbott(a)redhat.com> staging: android: ion: Switch from WARN to pr_warn Laura Abbott <labbott(a)redhat.com> staging: android: ion: Add __GFP_NOWARN for system contig heap Eric Biggers <ebiggers(a)google.com> crypto: x86/twofish-3way - Fix %rbp usage Paul Moore <paul(a)paul-moore.com> selinux: skip bounded transition processing if the policy isn't loaded Paul Moore <paul(a)paul-moore.com> selinux: ensure the context is NUL terminated in security_context_to_sid_core() David Howells <dhowells(a)redhat.com> Provide a function to create a NUL-terminated string from unterminated data Jason Wang <jasowang(a)redhat.com> ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE Chris Wilson <chris(a)chris-wilson.co.uk> drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all Jens Axboe <axboe(a)kernel.dk> blktrace: fix unlocked registration of tracepoints Xin Long <lucien.xin(a)gmail.com> sctp: set frag_point in sctp_setsockopt_maxseg correctly Cong Wang <xiyou.wangcong(a)gmail.com> xfrm: check id proto in validate_tmpl() Steffen Klassert <steffen.klassert(a)secunet.com> xfrm: Fix stack-out-of-bounds read on socket policy lookup. Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed. Florian Westphal <fw(a)strlen.de> xfrm: skip policies marked as dead while rehashing Johannes Berg <johannes.berg(a)intel.com> cfg80211: check dev_set_name() return value Tom Herbert <tom(a)quantonium.net> kcm: Only allow TCP sockets to be attached to a KCM mux Tom Herbert <tom(a)quantonium.net> kcm: Check if sk_user_data already set in kcm_attach Jason Wang <jasowang(a)redhat.com> vhost: use mutex_lock_nested() in vhost_dev_lock_vqs() ------------- Diffstat: Makefile | 10 +- arch/arm/boot/dts/am4372.dtsi | 6 +- arch/arm/boot/dts/am437x-cm-t43.dts | 4 +- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 3 +- arch/arm/boot/dts/logicpd-som-lv.dtsi | 16 +-- arch/arm/boot/dts/omap4.dtsi | 4 +- arch/arm/common/bL_switcher_dummy_if.c | 4 + arch/arm/mach-omap2/omap-secure.c | 19 ++++ arch/arm/mach-omap2/omap-secure.h | 4 + arch/arm/mach-omap2/pm.h | 4 - arch/arm/mach-omap2/pm34xx.c | 13 +-- arch/arm/mach-omap2/prm33xx.c | 12 --- arch/arm/mach-omap2/sleep34xx.S | 26 +---- arch/arm64/Kconfig | 2 +- arch/arm64/Kconfig.platforms | 2 + arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 + arch/arm64/crypto/crc32-arm64.c | 2 + arch/arm64/include/asm/bug.h | 33 +++--- arch/arm64/mm/mmu.c | 2 +- arch/m68k/kernel/vmlinux-nommu.lds | 2 + arch/m68k/kernel/vmlinux-std.lds | 2 + arch/m68k/kernel/vmlinux-sun3.lds | 2 + arch/powerpc/crypto/crc32c-vpmsum_glue.c | 1 + arch/powerpc/include/asm/exception-64s.h | 2 +- arch/powerpc/include/asm/paca.h | 3 +- arch/powerpc/kernel/asm-offsets.c | 3 +- arch/powerpc/kernel/entry_64.S | 9 +- arch/powerpc/kernel/exceptions-64s.S | 99 +++++++++--------- arch/powerpc/kernel/idle_book3s.S | 7 +- arch/powerpc/kernel/setup_64.c | 13 +-- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_segment.S | 4 +- arch/powerpc/perf/core-book3s.c | 4 +- arch/s390/crypto/crc32-vx.c | 3 + arch/sparc/crypto/crc32c_glue.c | 1 + arch/x86/Kconfig | 2 +- arch/x86/Kconfig.debug | 1 + arch/x86/boot/Makefile | 5 +- arch/x86/crypto/crc32-pclmul_glue.c | 1 + arch/x86/crypto/crc32c-intel_glue.c | 1 + arch/x86/crypto/twofish-x86_64-asm_64-3way.S | 112 +++++++++++---------- arch/x86/events/core.c | 4 +- arch/x86/include/asm/microcode_amd.h | 1 - arch/x86/include/asm/vmx.h | 5 +- arch/x86/kernel/cpu/mcheck/mce-inject.c | 5 +- arch/x86/kernel/cpu/microcode/amd.c | 17 ++-- arch/x86/kernel/vm86_32.c | 5 +- arch/x86/kvm/Kconfig | 3 +- arch/x86/kvm/vmx.c | 36 ++++--- arch/x86/kvm/x86.c | 40 ++++++-- arch/x86/math-emu/Makefile | 4 +- arch/x86/math-emu/reg_compare.c | 16 +-- arch/x86/mm/ioremap.c | 4 +- arch/x86/mm/kmmio.c | 12 ++- block/blk-map.c | 4 +- crypto/ahash.c | 22 +++- crypto/algif_hash.c | 52 ++-------- crypto/crc32_generic.c | 1 + crypto/crc32c_generic.c | 1 + crypto/cryptd.c | 7 +- crypto/mcryptd.c | 7 +- crypto/shash.c | 25 ++++- drivers/Makefile | 1 + drivers/android/binder.c | 2 + drivers/block/rbd.c | 2 +- drivers/clk/meson/Kconfig | 1 + drivers/clk/sunxi-ng/Kconfig | 1 + drivers/crypto/bfin_crc.c | 3 +- drivers/crypto/s5p-sss.c | 12 ++- drivers/crypto/talitos.c | 5 + drivers/dma/at_hdmac.c | 4 +- drivers/dma/dma-jz4740.c | 4 +- drivers/dma/ioat/init.c | 2 +- drivers/dma/zx296702_dma.c | 2 +- drivers/gpio/gpio-intel-mid.c | 2 +- drivers/gpio/gpio-xgene.c | 13 +-- drivers/gpu/drm/armada/armada_crtc.c | 25 ++--- drivers/gpu/drm/drm_modeset_lock.c | 2 +- drivers/gpu/drm/exynos/exynos_hdmi.c | 6 +- drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_panel.c | 86 ++++++++-------- drivers/gpu/drm/nouveau/nouveau_gem.c | 2 +- drivers/idle/Kconfig | 1 + drivers/infiniband/core/cma.c | 1 + drivers/infiniband/hw/i40iw/i40iw_d.h | 2 +- drivers/input/keyboard/tca8418_keypad.c | 21 ++-- drivers/isdn/hardware/eicon/message.c | 16 +-- drivers/media/i2c/s5k6aa.c | 5 + drivers/media/i2c/tc358743.c | 46 +++++---- drivers/media/pci/tw5864/tw5864-video.c | 6 +- drivers/media/usb/em28xx/Kconfig | 2 +- drivers/media/usb/go7007/Kconfig | 2 +- drivers/net/Kconfig | 3 + drivers/net/ethernet/arc/emac_rockchip.c | 7 +- drivers/net/ethernet/freescale/gianfar.c | 11 +- drivers/net/hippi/rrunner.c | 2 +- drivers/net/ipvlan/ipvlan_core.c | 1 + .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- drivers/net/wireless/st/cw1200/wsm.c | 8 +- drivers/pci/host/vmd.c | 2 +- drivers/perf/xgene_pmu.c | 1 + drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 2 +- drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 6 +- drivers/platform/x86/dell-laptop.c | 17 ++++ drivers/platform/x86/intel_mid_thermal.c | 2 + drivers/s390/block/dasd_eckd.c | 16 +-- drivers/scsi/advansys.c | 24 +++-- drivers/spi/Kconfig | 1 + drivers/spi/spi-sun4i.c | 2 +- drivers/staging/android/ashmem.c | 19 ++-- drivers/staging/android/ion/ion-ioctl.c | 4 +- drivers/staging/android/ion/ion_system_heap.c | 2 +- drivers/staging/iio/adc/ad7192.c | 27 +++-- drivers/staging/iio/impedance-analyzer/ad5933.c | 4 +- .../lustre/lnet/libcfs/linux/linux-crypto-adler.c | 1 + drivers/thermal/Kconfig | 4 +- drivers/usb/dwc3/dwc3-of-simple.c | 4 +- drivers/usb/dwc3/gadget.c | 2 +- drivers/usb/musb/musb_core.c | 2 + drivers/usb/phy/Kconfig | 1 + drivers/usb/usbip/stub_dev.c | 3 + drivers/usb/usbip/vhci_hcd.c | 2 + drivers/vhost/vhost.c | 2 +- drivers/video/fbdev/mmp/core.c | 5 + drivers/video/fbdev/via/viafbdev.c | 8 +- drivers/xen/Kconfig | 2 +- fs/btrfs/ioctl.c | 2 +- fs/compat_binfmt_elf.c | 2 + fs/reiserfs/lbalance.c | 2 +- fs/reiserfs/reiserfs.h | 1 - include/crypto/hash.h | 34 +++++-- include/linux/crypto.h | 8 ++ include/linux/pci-ecam.h | 2 +- include/linux/ptr_ring.h | 2 + include/linux/string.h | 1 + include/net/red.h | 13 ++- include/net/sctp/sctp.h | 3 +- include/trace/events/clk.h | 4 +- kernel/kcov.c | 4 +- kernel/trace/blktrace.c | 32 ++++-- lib/Kconfig.debug | 1 - lib/oid_registry.c | 8 +- mm/early_ioremap.c | 2 +- mm/shmem.c | 6 +- mm/util.c | 24 +++++ mm/vmscan.c | 3 + net/core/dev.c | 2 +- net/decnet/af_decnet.c | 62 ++++++------ net/ipv4/ip_sockglue.c | 14 +-- net/ipv4/netfilter/ipt_CLUSTERIP.c | 16 ++- net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 6 +- net/ipv6/ipv6_sockglue.c | 17 +--- net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c | 18 ++-- net/kcm/kcmsock.c | 25 ++++- net/netfilter/x_tables.c | 10 +- net/netfilter/xt_RATEEST.c | 22 +++- net/netfilter/xt_cgroup.c | 1 + net/rds/tcp.c | 9 +- net/rds/tcp.h | 1 + net/sched/sch_choke.c | 3 + net/sched/sch_gred.c | 3 + net/sched/sch_red.c | 2 + net/sched/sch_sfq.c | 3 + net/sctp/outqueue.c | 6 +- net/sctp/socket.c | 29 ++++-- net/wireless/core.c | 8 +- net/xfrm/xfrm_policy.c | 11 +- net/xfrm/xfrm_user.c | 24 +++++ scripts/kernel-doc | 2 +- security/keys/Kconfig | 1 + security/selinux/ss/services.c | 21 ++-- sound/pci/hda/patch_ca0132.c | 3 + sound/soc/rockchip/rockchip_spdif.c | 18 +++- sound/soc/ux500/mop500.c | 4 + sound/soc/ux500/ux500_pcm.c | 5 + tools/build/Makefile.build | 10 ++ tools/perf/bench/numa.c | 56 ++++++++++- tools/perf/builtin-top.c | 15 ++- tools/scripts/Makefile.include | 12 ++- 180 files changed, 1121 insertions(+), 680 deletions(-)

6 years

7
131
0 0

[PATCH] w1: gpio: fix problem with platfom data in w1-gpio

by Pawel Dembicki

In devices, where fdt is used, is impossible to apply platform data without proper fdt node. This patch allow to use platform data in devices with fdt. Signed-off-by: Pawel Dembicki <paweldembicki(a)gmail.com> --- drivers/w1/masters/w1-gpio.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index a90728ceec5a..7b80762941af 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -112,17 +112,16 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; - struct w1_gpio_platform_data *pdata; + struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); int err; - if (of_have_populated_dt()) { + if (of_have_populated_dt() && !pdata) { err = w1_gpio_probe_dt(pdev); if (err < 0) return err; + pdata = dev_get_platdata(&pdev->dev); } - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { dev_err(&pdev->dev, "No configuration data\n"); return -ENXIO; -- 2.14.1

6 years

4
7
0 0

[Linux-stable-mirror] [PATCH v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()

by Jeffy Chen

From: AMAN DEEP <aman.deep(a)samsung.com> There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes:977dcfdc6031("USB:OHCI:don't lose track of EDs when a controller dies") Acked-by: Alan Stern <stern(a)rowland.harvard.edu> CC: <stable(a)vger.kernel.org> Signed-off-by: Aman Deep <aman.deep(a)samsung.com> Signed-off-by: Jeffy Chen <jeffy.chen(a)rock-chips.com> --- Changes in v6: This is a resend of Aman Deep's v5 patch [0], which solved the hang we hit [1]. (Thanks Aman :) The v5 has some format issues, so i slightly adjust the commit message. [0] https://www.spinics.net/lists/linux-usb/msg129010.html [1] https://bugs.chromium.org/p/chromium/issues/detail?id=803749 drivers/usb/host/ohci-q.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index b2ec8c399363..4ccb85a67bb3 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -1019,6 +1019,8 @@ static void finish_unlinks(struct ohci_hcd *ohci) * have modified this list. normally it's just prepending * entries (which we'd ignore), but paranoia won't hurt. */ + *last = ed->ed_next; + ed->ed_next = NULL; modified = 0; /* unlink urbs as requested, but rescan the list after @@ -1077,21 +1079,22 @@ static void finish_unlinks(struct ohci_hcd *ohci) goto rescan_this; /* - * If no TDs are queued, take ED off the ed_rm_list. + * If no TDs are queued, ED is now idle. * Otherwise, if the HC is running, reschedule. - * If not, leave it on the list for further dequeues. + * If the HC isn't running, add ED back to the + * start of the list for later processing. */ if (list_empty(&ed->td_list)) { - *last = ed->ed_next; - ed->ed_next = NULL; ed->state = ED_IDLE; list_del(&ed->in_use_list); } else if (ohci->rh_state == OHCI_RH_RUNNING) { - *last = ed->ed_next; - ed->ed_next = NULL; ed_schedule(ohci, ed); } else { - last = &ed->ed_next; + ed->ed_next = ohci->ed_rm_list; + ohci->ed_rm_list = ed; + /* Don't loop on the same ED */ + if (last == &ohci->ed_rm_list) + last = &ed->ed_next; } if (modified) -- 2.11.0

6 years

3
4
0 0

[PATCH] dmaengine: at_xdmac: fix rare residue corruption

by Maxime Jayat

Despite the efforts made to correctly read the NDA and CUBC registers, the order in which the registers are read could sometimes lead to an inconsistent state. Re-using the timeline from the comments, this following timing of registers reads could lead to reading NDA with value "@desc2" and CUBC with value "MAX desc1": INITD -------- ------------ |____________________| _______________________ _______________ NDA @desc2 \/ @desc3 _______________________/\_______________ __________ ___________ _______________ CUBC 0 \/ MAX desc1 \/ MAX desc2 __________/\___________/\_______________ | | | | Events:(1)(2) (3)(4) (1) check_nda = @desc2 (2) initd = 1 (3) cur_ubc = MAX desc1 (4) cur_nda = @desc2 This is allowed by the condition ((check_nda == cur_nda) && initd), despite cur_ubc and cur_nda being in the precise state we don't want. This error leads to incorrect residue computation. Fix it by inversing the order in which CUBC and INITD are read. This makes sure that NDA and CUBC are always read together either _before_ INITD goes to 0 or _after_ it is back at 1. The case where NDA is read before INITD is at 0 and CUBC is read after INITD is back at 1 will be rejected by check_nda and cur_nda being different. Fixes: 53398f488821 ("dmaengine: at_xdmac: fix residue corruption") Cc: stable(a)vger.kernel.org Signed-off-by: Maxime Jayat <maxime.jayat(a)mobile-devices.fr> --- Hi, I had a bug where the serial ports on the Atmel SAMA5D2 were sometimes returning the same data twice, for up to 4096 bytes. After investigation, I noticed that the ring buffer used in atmel_serial (in rx dma mode) had sometimes a incorrect "head" value, which made the ring buffer do a complete extraneous loop of data pushed to the tty layer. I tracked it down to the residue of the dma being wrong, and after more head scratching, I found this bug in the reading of the registers. Before fixing this, I was able to reproduce the bug reliably in a few minutes. With this patch applied, the bug did not reappear after several hours in testing. drivers/dma/at_xdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index c00e3923d7d8..94236ec9d410 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -1471,10 +1471,10 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) { check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; rmb(); - initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); - rmb(); cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC); rmb(); + initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD); + rmb(); cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc; rmb(); -- 2.14.1

6 years

3
4
0 0

[Linux-stable-mirror] [PATCH] ath9k: Protect queue draining by rcu_read_lock()

by Toke Høiland-Jørgensen

When ath9k was switched over to use the mac80211 intermediate queues, node cleanup now drains the mac80211 queues. However, this call path is not protected by rcu_read_lock() as it was previously entirely internal to the driver which uses its own locking. This leads to a possible rcu_dereference() without holding rcu_read_lock(); but only if a station is cleaned up while having packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the caller in ath9k. Fixes: 50f08edf9809 ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable(a)vger.kernel.org Reported-by: Ben Greear <greearb(a)candelatech.com> Signed-off-by: Toke Høiland-Jørgensen <toke(a)toke.dk> --- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 396bf05c6bf6..d8b041f48ca8 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2892,6 +2892,8 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) struct ath_txq *txq; int tidno; + rcu_read_lock(); + for (tidno = 0; tidno < IEEE80211_NUM_TIDS; tidno++) { tid = ath_node_to_tid(an, tidno); txq = tid->txq; @@ -2909,6 +2911,8 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) if (!an->sta) break; /* just one multicast ath_atx_tid */ } + + rcu_read_unlock(); } #ifdef CONFIG_ATH9K_TX99 -- 2.16.0

6 years, 1 month

3
3
0 0

[PATCH 4.4 000/108] 4.4.116-stable review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late. The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.4.116-rc1 Steven Rostedt (VMware) <rostedt(a)goodmis.org> ftrace: Remove incorrect setting of glob search field Eric W. Biederman <ebiederm(a)xmission.com> mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy Amir Goldstein <amir73il(a)gmail.com> ovl: fix failure to fsync lower dir Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> ACPI: sbshc: remove raw pointer from printk() message Keith Busch <keith.busch(a)intel.com> nvme: Fix managing degraded controllers Nikolay Borisov <nborisov(a)suse.com> btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker Bart Van Assche <bart.vanassche(a)wdc.com> pktcdvd: Fix pkt_setup_dev() error path James Hogan <jhogan(a)kernel.org> EDAC, octeon: Fix an uninitialized variable warning Max Filippov <jcmvbkbc(a)gmail.com> xtensa: fix futex_atomic_cmpxchg_inatomic Mikulas Patocka <mpatocka(a)redhat.com> alpha: fix reboot on Avanti platform Mikulas Patocka <mpatocka(a)redhat.com> alpha: fix crash if pthread_create races with signal delivery Eric W. Biederman <ebiederm(a)xmission.com> signal/sh: Ensure si_signo is initialized in do_divide_error Eric W. Biederman <ebiederm(a)xmission.com> signal/openrisc: Fix do_unaligned_access to send the proper signal Hans de Goede <hdegoede(a)redhat.com> Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version Kai-Heng Feng <kai.heng.feng(a)canonical.com> Revert "Bluetooth: btusb: fix QCA Rome suspend/resume" Hans de Goede <hdegoede(a)redhat.com> Bluetooth: btsdio: Do not bind to non-removable BCM43341 Hans de Goede <hdegoede(a)redhat.com> HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working Rasmus Villemoes <linux(a)rasmusvillemoes.dk> kernel/async.c: revert "async: simplify lowest_in_progress()" Mauro Carvalho Chehab <mchehab(a)osg.samsung.com> media: cxusb, dib0700: ignore XC2028_I2C_FLUSH Mauro Carvalho Chehab <mchehab(a)s-opensource.com> media: ts2020: avoid integer overflows on 32 bit machines Martin Kaiser <martin(a)kaiser.cx> watchdog: imx2_wdt: restore previous timeout after suspend+resume Liran Alon <liran.alon(a)oracle.com> KVM: nVMX: Fix races when sending nested PI while dest enters/leaves L2 Marc Zyngier <marc.zyngier(a)arm.com> arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls Horia Geantă <horia.geanta(a)nxp.com> crypto: caam - fix endless loop when DECO acquire fails Daniel Mentz <danielmentz(a)google.com> media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 Daniel Mentz <danielmentz(a)google.com> media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha Hans Verkuil <hansverk(a)cisco.com> media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: avoid sizeof(type) Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: fix the indentation Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> vb2: V4L2_BUF_FLAG_DONE is set after DQBUF Hans Verkuil <hans.verkuil(a)cisco.com> media: v4l2-ioctl.c: don't copy back the result for -ENOTTY Cong Wang <xiyou.wangcong(a)gmail.com> nsfs: mark dentry with DCACHE_RCUACCESS Eric Biggers <ebiggers(a)google.com> crypto: poly1305 - remove ->setkey() method Eric Biggers <ebiggers(a)google.com> crypto: cryptd - pass through absence of ->setkey() Eric Biggers <ebiggers(a)google.com> crypto: hash - introduce crypto_hash_alg_has_setkey() Mika Westerberg <mika.westerberg(a)linux.intel.com> ahci: Add Intel Cannon Lake PCH-H PCI ID Hans de Goede <hdegoede(a)redhat.com> ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI Hans de Goede <hdegoede(a)redhat.com> ahci: Annotate PCI ids for mobile Intel chipsets as such Ivan Vecera <ivecera(a)redhat.com> kernfs: fix regression in kernfs_fop_write caused by wrong type Eric Biggers <ebiggers(a)google.com> NFS: reject request for id_legacy key without auxdata J. Bruce Fields <bfields(a)redhat.com> NFS: commit direct writes even if they fail partially Trond Myklebust <trond.myklebust(a)primarydata.com> NFS: Add a cond_resched() to nfs_commit_release_pages() Scott Mayhew <smayhew(a)redhat.com> nfs/pnfs: fix nfs_direct_req ref leak when i/o falls back to the mds Bradley Bolen <bradleybolen(a)gmail.com> ubi: block: Fix locking for idr_alloc/idr_remove Miquel Raynal <miquel.raynal(a)free-electrons.com> mtd: nand: sunxi: Fix ECC strength choice Miquel Raynal <miquel.raynal(a)free-electrons.com> mtd: nand: Fix nand_do_read_oob() return value Kamal Dasu <kdasu.kdev(a)gmail.com> mtd: nand: brcmnand: Disable prefetch by default Arnd Bergmann <arnd(a)arndb.de> mtd: cfi: convert inline functions to macros Malcolm Priestley <tvboxspy(a)gmail.com> media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner Malcolm Priestley <tvboxspy(a)gmail.com> media: dvb-usb-v2: lmedm04: Improve logic checking of warm start Mohamed Ghannam <simo.ghannam(a)gmail.com> dccp: CVE-2017-8824: use-after-free in DCCP code Steven Rostedt (VMware) <rostedt(a)goodmis.org> sched/rt: Up the root domain ref count when passing it around via IPIs Steven Rostedt (VMware) <rostedt(a)goodmis.org> sched/rt: Use container_of() to get root domain in rto_push_irq_work_func() Petr Cvek <petr.cvek(a)tul.cz> usb: gadget: uvc: Missing files for configfs interface Thomas Gleixner <tglx(a)linutronix.de> posix-timer: Properly check sigevent->sigev_notify Eric W. Biederman <ebiederm(a)xmission.com> netfilter: nf_queue: Make the queue_handler pernet Hugh Dickins <hughd(a)google.com> kaiser: fix compile error without vsyscall Eric Biggers <ebiggers(a)google.com> x86/kaiser: fix build error with KASAN && !FUNCTION_GRAPH_TRACER Yang Shunyong <shunyong.yang(a)hxt-semitech.com> dmaengine: dmatest: fix container_of member in dmatest_callback Aurelien Aptel <aaptel(a)suse.com> CIFS: zero sensitive data when freeing Daniel N Pettersson <danielnp(a)axis.com> cifs: Fix autonegotiate security settings mismatch Matthew Wilcox <mawilcox(a)microsoft.com> cifs: Fix missing put_xid in cifs_file_strict_mmap Michal Suchanek <msuchanek(a)suse.de> powerpc/pseries: include linux/types.h in asm/hvcall.h Borislav Petkov <bp(a)suse.de> x86/microcode: Do the family check first Borislav Petkov <bp(a)suse.de> x86/microcode/AMD: Do not load when running on a hypervisor Robert Baronescu <robert.baronescu(a)nxp.com> crypto: tcrypt - fix S/G table for test_aead_speed() Al Viro <viro(a)zeniv.linux.org.uk> don't put symlink bodies in pagecache into highmem Eric Biggers <ebiggers(a)google.com> KEYS: encrypted: fix buffer overread in valid_master_desc() Jesse Chan <jc(a)linux.com> media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE Jason Wang <jasowang(a)redhat.com> vhost_net: stop device during reset owner Li RongQing <lirongqing(a)baidu.com> tcp: release sk_frag.page in tcp_disconnect Chunhao Lin <hau(a)realtek.com> r8169: fix RTL8168EP take too long to complete driver initialization. Junxiao Bi <junxiao.bi(a)oracle.com> qlcnic: fix deadlock bug Eric Dumazet <edumazet(a)google.com> net: igmp: add a missing rcu locking section Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com> ip6mr: fix stale iterator Josh Poimboeuf <jpoimboe(a)redhat.com> x86/asm: Fix inline asm call constraints for GCC 4.4 Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> drm: rcar-du: Fix race condition when disabling planes at CRTC stop Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> drm: rcar-du: Use the VBK interrupt for vblank events Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> ASoC: rsnd: avoid duplicate free_irq() Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> ASoC: rsnd: don't call free_irq() on Parent SSI Julian Scheel <julian(a)jusst.de> ASoC: simple-card: Fix misleading error message Matthias Hintzmann <matthias.dev(a)gmx.de> net: cdc_ncm: initialize drvflags before usage Shuah Khan <shuahkh(a)osg.samsung.com> usbip: fix 3eee23c3ec14 tcp_socket address still in the status file Shuah Khan <shuahkh(a)osg.samsung.com> usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit Jesse Chan <jc(a)linux.com> ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Allow control of RFI flush via debugfs Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Wire up cpu_show_meltdown() Oliver O'Halloran <oohall(a)gmail.com> powerpc/powernv: Check device-tree for RFI flush settings Michael Neuling <mikey(a)neuling.org> powerpc/pseries: Query hypervisor for RFI flush settings Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Add support for RFI flush of L1-D cache Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Simple RFI macro conversions Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Add macros for annotating the destination of rfid/hrfid Michael Neuling <mikey(a)neuling.org> powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper Alan Modra <amodra(a)gmail.com> powerpc: Simplify module TOC handling Benjamin Herrenschmidt <benh(a)kernel.crashing.org> powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC Oliver O'Halloran <oohall(a)gmail.com> powerpc/64: Fix flush_(d|i)cache_range() called from modules Naveen N. Rao <naveen.n.rao(a)linux.vnet.ibm.com> powerpc/bpf/jit: Disable classic BPF JIT on ppc64le ------------- Diffstat: Makefile | 4 +- arch/alpha/kernel/pci_impl.h | 3 +- arch/alpha/kernel/process.c | 3 +- arch/arm/kvm/handle_exit.c | 13 +- arch/mn10300/mm/misalignment.c | 2 +- arch/openrisc/kernel/traps.c | 10 +- arch/powerpc/Kconfig | 3 +- arch/powerpc/include/asm/exception-64e.h | 6 + arch/powerpc/include/asm/exception-64s.h | 55 +- arch/powerpc/include/asm/feature-fixups.h | 15 + arch/powerpc/include/asm/hvcall.h | 18 + arch/powerpc/include/asm/paca.h | 10 + arch/powerpc/include/asm/plpar_wrappers.h | 14 + arch/powerpc/include/asm/ppc_asm.h | 12 + arch/powerpc/include/asm/setup.h | 13 + arch/powerpc/kernel/asm-offsets.c | 4 + arch/powerpc/kernel/entry_64.S | 44 +- arch/powerpc/kernel/exceptions-64s.S | 126 ++- arch/powerpc/kernel/misc_64.S | 32 +- arch/powerpc/kernel/module_64.c | 12 +- arch/powerpc/kernel/process.c | 5 +- arch/powerpc/kernel/setup_64.c | 139 +++ arch/powerpc/kernel/vmlinux.lds.S | 9 + arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_segment.S | 4 +- arch/powerpc/lib/feature-fixups.c | 42 + arch/powerpc/platforms/powernv/setup.c | 50 + arch/powerpc/platforms/pseries/setup.c | 37 +- arch/sh/kernel/traps_32.c | 3 +- arch/x86/crypto/poly1305_glue.c | 1 - arch/x86/include/asm/asm.h | 4 +- arch/x86/include/asm/vsyscall.h | 2 +- arch/x86/kernel/cpu/microcode/core.c | 47 +- arch/x86/kvm/vmx.c | 5 +- arch/x86/mm/kaiser.c | 2 +- arch/xtensa/include/asm/futex.h | 23 +- crypto/ahash.c | 11 + crypto/cryptd.c | 3 +- crypto/poly1305_generic.c | 17 +- crypto/tcrypt.c | 6 +- drivers/acpi/sbshc.c | 4 +- drivers/ata/ahci.c | 37 +- drivers/block/pktcdvd.c | 4 +- drivers/bluetooth/btsdio.c | 9 + drivers/bluetooth/btusb.c | 19 +- drivers/crypto/caam/ctrl.c | 8 +- drivers/dma/dmatest.c | 2 +- drivers/edac/octeon_edac-lmc.c | 1 + drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 56 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 + drivers/hid/hid-core.c | 12 +- drivers/media/dvb-frontends/ts2020.c | 4 +- drivers/media/platform/soc_camera/soc_scale_crop.c | 4 + drivers/media/usb/dvb-usb-v2/lmedm04.c | 39 +- drivers/media/usb/dvb-usb/cxusb.c | 2 + drivers/media/usb/dvb-usb/dib0700_devices.c | 1 + drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 1023 ++++++++++++-------- drivers/media/v4l2-core/v4l2-ioctl.c | 5 +- drivers/media/v4l2-core/videobuf2-v4l2.c | 6 + drivers/mtd/nand/brcmnand/brcmnand.c | 13 +- drivers/mtd/nand/nand_base.c | 5 +- drivers/mtd/nand/sunxi_nand.c | 8 +- drivers/mtd/ubi/block.c | 42 +- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 18 +- drivers/net/ethernet/realtek/r8169.c | 4 +- drivers/net/usb/cdc_ncm.c | 6 +- drivers/nvme/host/pci.c | 13 +- drivers/usb/gadget/function/uvc_configfs.c | 16 +- drivers/usb/usbip/vhci_hcd.c | 2 +- drivers/usb/usbip/vhci_sysfs.c | 7 +- drivers/vhost/net.c | 1 + drivers/watchdog/imx2_wdt.c | 20 +- fs/btrfs/inode.c | 10 +- fs/cifs/cifsencrypt.c | 3 +- fs/cifs/connect.c | 6 +- fs/cifs/file.c | 26 +- fs/cifs/misc.c | 14 +- fs/cifs/smb2pdu.c | 3 +- fs/ext4/inode.c | 1 + fs/ext4/namei.c | 1 + fs/ext4/symlink.c | 10 +- fs/f2fs/inode.c | 1 + fs/f2fs/namei.c | 5 +- fs/inode.c | 6 + fs/kernfs/file.c | 2 +- fs/nfs/direct.c | 4 +- fs/nfs/nfs4idmap.c | 6 +- fs/nfs/pnfs.c | 4 +- fs/nfs/write.c | 2 + fs/nsfs.c | 1 + fs/overlayfs/readdir.c | 6 +- include/crypto/internal/hash.h | 2 + include/crypto/poly1305.h | 2 - include/linux/fs.h | 1 + include/linux/mtd/map.h | 130 ++- include/net/netfilter/nf_queue.h | 4 +- include/net/netns/netfilter.h | 2 + kernel/async.c | 20 +- kernel/sched/core.c | 13 + kernel/sched/rt.c | 24 +- kernel/sched/sched.h | 2 + kernel/time/posix-timers.c | 34 +- kernel/trace/ftrace.c | 1 - net/dccp/proto.c | 5 + net/ipv4/igmp.c | 4 + net/ipv4/tcp.c | 6 + net/ipv6/ip6mr.c | 1 + net/netfilter/nf_queue.c | 17 +- net/netfilter/nfnetlink_queue.c | 18 +- scripts/mod/modpost.c | 3 +- security/keys/encrypted-keys/encrypted.c | 31 +- sound/soc/codecs/pcm512x-spi.c | 4 + sound/soc/generic/simple-card.c | 8 +- sound/soc/sh/rcar/rsnd.h | 2 + sound/soc/sh/rcar/ssi.c | 5 + 116 files changed, 1821 insertions(+), 851 deletions(-)

6 years, 1 month

9
124
0 0

Re: [Linux-stable-mirror] [PATCH 4.13 28/43] SMB3: Validate negotiate request must always be signed

by Srivatsa S. Bhat

On 11/1/17 8:18 AM, Greg Kroah-Hartman wrote: > On Tue, Oct 31, 2017 at 03:02:11PM +0200, Thomas Backlund wrote: >> Den 31.10.2017 kl. 11:55, skrev Greg Kroah-Hartman: >>> 4.13-stable review patch. If anyone has any objections, please let me know. >>> >>> ------------------ >>> >>> From: Steve French <smfrench(a)gmail.com> >>> >>> commit 4587eee04e2ac7ac3ac9fa2bc164fb6e548f99cd upstream. >>> >>> According to MS-SMB2 3.2.55 validate_negotiate request must >>> always be signed. Some Windows can fail the request if you send it unsigned >>> >>> See kernel bugzilla bug 197311 >>> >>> Acked-by: Ronnie Sahlberg <lsahlber.redhat.com> >>> Signed-off-by: Steve French <smfrench(a)gmail.com> >>> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> >>> >>> --- >>> fs/cifs/smb2pdu.c | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> --- a/fs/cifs/smb2pdu.c >>> +++ b/fs/cifs/smb2pdu.c >>> @@ -1963,6 +1963,9 @@ SMB2_ioctl(const unsigned int xid, struc >>> } else >>> iov[0].iov_len = get_rfc1002_length(req) + 4; >>> + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ >>> + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) >>> + req->hdr.sync_hdr.Flags |= SMB2_FLAGS_SIGNED; >>> rc = SendReceive2(xid, ses, iov, n_iov, &resp_buftype, flags, &rsp_iov); >>> cifs_small_buf_release(req); >>> >>> >>> >> >> This one needs to be backported to all stable kernels as the commit that >> introduced the regression: >> ' >> 0603c96f3af50e2f9299fa410c224ab1d465e0f9 >> SMB: Validate negotiate (to protect against downgrade) even if signing off >> >> is backported in stable trees as of: 4.9.53, 4.4.90, 3.18.73 > > Oh wait, it breaks the builds on older kernels, that's why I didn't > apply it :) > > Can you provide me with a working backport? > Hi Steve, Is there a version of this fix available for stable kernels? I tried applying this patch to 4.4.109 (and a similar one for 4.9.74), but it didn't fix the problem. Instead, I actually got a NULL pointer dereference when I tried to mount an SMB3 share. Here is the patch I tried on 4.4.109: diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index f2ff60e..3963bd2 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1559,6 +1559,9 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, } else iov[0].iov_len = get_rfc1002_length(req) + 4; + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) + req->hdr.Flags |= SMB2_FLAGS_SIGNED; rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; This results in the following NULL pointer dereference when I try mounting: # mount -vvv -t cifs -o vers=3.0,credentials=.smbcred //<ip_addr>/TestSMB/ testdir [ 53.073057] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 53.073511] IP: [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.073973] PGD 0 [ 53.074427] Oops: 0000 [#1] SMP [ 53.074946] Modules linked in: arc4(E) ecb(E) md4(E) cifs(E) dns_resolver(E) vmw_vsock_vmci_transport(E) vsock(E) hid_generic(E) usbhid(E) hid(E) xt_conntrack(E) mousedev(E) iptable_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) nf_nat(E) iptable_filter(E) ip_tables(E) crc32c_intel(E) xt_LOG(E) nf_conntrack(E) jitterentropy_rng(E) hmac(E) sha256_ssse3(E) sha256_generic(E) drbg(E) vmw_balloon(E) ansi_cprng(E) aesni_intel(E) aes_x86_64(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E) psmouse(E) evdev(E) uhci_hcd(E) ehci_pci(E) ehci_hcd(E) usbcore(E) intel_agp(E) usb_common(E) vmw_vmci(E) i2c_piix4(E) intel_gtt(E) nfit(E) battery(E) tpm_tis(E) tpm(E) ac(E) button(E) sch_fq_codel(E) autofs4(E) [ 53.079435] CPU: 3 PID: 829 Comm: mount.cifs Tainted: G E 4.4.109-possible-fix1+ #21 [ 53.079983] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 [ 53.081086] task: ffff8800b4f41940 ti: ffff8800b92ac000 task.ti: ffff8800b92ac000 [ 53.081667] RIP: 0010:[<ffffffff8138ee9a>] [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.082247] RSP: 0018:ffff8800b92af9a8 EFLAGS: 00010282 [ 53.082604] systemd-journald[284]: Compressed data object 721 -> 468 using XZ [ 53.083419] RAX: ffff8800af5943c0 RBX: ffff8800b484a800 RCX: 00000000ffff0ec7 [ 53.084001] RDX: 0000000000000010 RSI: ffff8800b900af18 RDI: 0000000000000000 [ 53.084602] RBP: ffff8800b92af9e0 R08: ffff8800b92afb64 R09: 0000000000000000 [ 53.085184] R10: 3031322e3030312e R11: 00000000000007f5 R12: 0000000000000002 [ 53.085755] R13: 0000000000000000 R14: ffff8800b900af18 R15: 0000000000000010 [ 53.086333] FS: 00007fb659b45740(0000) GS:ffff88013fcc0000(0000) knlGS:0000000000000000 [ 53.086907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.087480] CR2: 0000000000000050 CR3: 00000000b7970000 CR4: 00000000001606e0 [ 53.088107] Stack: [ 53.088681] ffff8800bba5d8c0 ffff8800b92afa08 ffff8800b484a800 0000000000000002 [ 53.089281] ffff8800b92afac8 000008012400007d ffff8800b484a800 ffff8800b92afa50 [ 53.089871] ffffffffa02194a6 ffff8800b92afb70 ffff8800af5943c0 ffff8800b7a2f800 [ 53.090457] Call Trace: [ 53.091054] [<ffffffffa02194a6>] smb3_calc_signature+0xb6/0x290 [cifs] [ 53.091650] [<ffffffffa0218b5b>] smb2_sign_rqst+0x2b/0x40 [cifs] [ 53.092244] [<ffffffffa0219981>] smb2_setup_request+0xd1/0x170 [cifs] [ 53.092838] [<ffffffffa02082a7>] SendReceive2+0xc7/0x450 [cifs] [ 53.093435] [<ffffffffa02057d5>] ? cifs_small_buf_get+0x15/0x30 [cifs] [ 53.094030] [<ffffffffa021b83f>] ? small_smb2_init+0xdf/0x200 [cifs] [ 53.094616] [<ffffffffa021d6d7>] SMB2_ioctl+0x147/0x310 [cifs] [ 53.095203] [<ffffffffa021d99e>] smb3_validate_negotiate+0xfe/0x2d0 [cifs] [ 53.095792] [<ffffffffa021b196>] SMB2_tcon+0x296/0x500 [cifs] [ 53.096362] [<ffffffff817d7b49>] ? _raw_spin_unlock_irqrestore+0x9/0x10 [ 53.096930] [<ffffffffa01efe0b>] cifs_get_tcon+0x1bb/0x560 [cifs] [ 53.097486] [<ffffffffa01f2b10>] cifs_mount+0x690/0xde0 [cifs] [ 53.098032] [<ffffffff817d7b49>] ? _raw_spin_unlock_irqrestore+0x9/0x10 [ 53.098570] [<ffffffffa01de6eb>] cifs_do_mount+0xcb/0x5a0 [cifs] [ 53.099089] [<ffffffff81193ef7>] ? alloc_pages_current+0x87/0x110 [ 53.099598] [<ffffffff811b7b03>] mount_fs+0x33/0x160 [ 53.100091] [<ffffffff811d1b62>] vfs_kern_mount+0x62/0x100 [ 53.100574] [<ffffffff811d3f1b>] do_mount+0x21b/0xd30 [ 53.101050] [<ffffffff81193ef7>] ? alloc_pages_current+0x87/0x110 [ 53.101511] [<ffffffff811d4d47>] SyS_mount+0x87/0xd0 [ 53.101959] [<ffffffff817d806e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 53.102400] Code: 89 e5 8b 12 e8 78 d2 04 00 31 c0 5d c3 0f 1f 40 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fd 53 49 89 f6 41 89 d7 48 83 ec 10 <4c> 8b 67 50 41 8b 5c 24 2c 48 85 de 75 14 41 ff 54 24 e8 48 83 [ 53.103820] RIP [<ffffffff8138ee9a>] crypto_shash_setkey+0x1a/0xc0 [ 53.104288] RSP <ffff8800b92af9a8> [ 53.104745] CR2: 0000000000000050 [ 53.105225] ---[ end trace fc2de0ad7f229314 ]--- The CIFS config options enabled are: CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_ACL=y CONFIG_CIFS_DEBUG=y CONFIG_CIFS_DEBUG2=y CONFIG_CIFS_DFS_UPCALL=y CONFIG_CIFS_SMB2=y # CONFIG_CIFS_SMB311 is not set # CONFIG_CIFS_FSCACHE is not set The problem seems to be that crypto_shash_setkey() is called without calling smb3_crypto_shash_allocate() first. So I looked up how mainline avoids this issue, and it looks like the following commit makes a call to generate_signingkey() even when server->sign == false, and this path eventually calls smb3_crytpto_shash_allocate()), thus avoiding the NULL pointer dereference. cabfb3680f78 (CIFS: Enable encryption during session setup phase) So, I adopted this change, and now my resulting patch looks like this: diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index f2ff60e..19cc92c 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -833,7 +833,7 @@ ssetup_exit: if (!rc) { mutex_lock(&server->srv_mutex); - if (server->sign && server->ops->generate_signingkey) { + if (server->ops->generate_signingkey) { rc = server->ops->generate_signingkey(ses); kfree(ses->auth_key.response); ses->auth_key.response = NULL; @@ -1559,6 +1559,9 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, } else iov[0].iov_len = get_rfc1002_length(req) + 4; + /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ + if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) + req->hdr.Flags |= SMB2_FLAGS_SIGNED; rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0); rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base; This fixes the NULL pointer dereference, but the mount still fails, but this time for a different reason -- due to STATUS_ACCESS_DENIED: # mount -vvv -t cifs -o vers=3.0,credentials=.smbcred //<ip_addr>/TestSMB/ testdir mount.cifs kernel mount options: ip=<ip_addr>,unc=\\<ip_addr>\TestSMB,vers=3.0,user=srivatsa,pass=******** mount error(5): Input/output error Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Here is the dmesg output: [ 48.192141] fs/cifs/cifsfs.c: Devname: //<ip_addr>/TestSMB/ flags: 0 [ 48.192178] address conversion returned 1 for <ip_addr> [ 48.192205] fs/cifs/connect.c: Username: srivatsa [ 48.192222] fs/cifs/connect.c: file mode: 0x1ed dir mode: 0x1ed [ 48.192280] fs/cifs/connect.c: CIFS VFS: in cifs_mount as Xid: 0 with uid: 0 [ 48.192302] fs/cifs/connect.c: UNC: \\<ip_addr>\TestSMB [ 48.192335] fs/cifs/connect.c: Socket created [ 48.192349] fs/cifs/connect.c: sndbuf 16384 rcvbuf 87380 rcvtimeo 0x6d6 [ 48.193453] fs/cifs/connect.c: CIFS VFS: in cifs_get_smb_ses as Xid: 1 with uid: 0 [ 48.193462] fs/cifs/connect.c: Demultiplex PID: 829 [ 48.193492] fs/cifs/connect.c: Existing smb sess not found [ 48.193510] fs/cifs/smb2pdu.c: Negotiate protocol [ 48.193531] fs/cifs/transport.c: Sending smb: smb_len=102 [ 48.194301] fs/cifs/connect.c: RFC1002 header 0xaa [ 48.194321] fs/cifs/smb2misc.c: smb2_check_message length: 0xae, smb_buf_length: 0xaa [ 48.194349] fs/cifs/smb2misc.c: SMB2 data length 42 offset 128 [ 48.194367] fs/cifs/smb2misc.c: SMB2 len 174 [ 48.194393] fs/cifs/transport.c: cifs_sync_mid_result: cmd=0 mid=0 state=4 [ 48.194415] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.194436] fs/cifs/smb2pdu.c: mode 0x1 [ 48.194448] fs/cifs/smb2pdu.c: negotiated smb3.0 dialect [ 48.194466] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1 [ 48.194484] fs/cifs/asn1.c: OID len = 10 oid = 0x1 0x3 0x6 0x1 [ 48.194502] fs/cifs/connect.c: Security Mode: 0x1 Capabilities: 0x300007 TimeAdjust: 0 [ 48.194525] fs/cifs/smb2pdu.c: Session Setup [ 48.194539] fs/cifs/transport.c: Sending smb: smb_len=120 [ 48.194817] fs/cifs/connect.c: RFC1002 header 0x136 [ 48.194836] fs/cifs/smb2misc.c: smb2_check_message length: 0x13a, smb_buf_length: 0x136 [ 48.194859] fs/cifs/smb2misc.c: SMB2 data length 238 offset 72 [ 48.195306] fs/cifs/smb2misc.c: SMB2 len 314 [ 48.195740] fs/cifs/transport.c: cifs_sync_mid_result: cmd=1 mid=1 state=4 [ 48.196174] Status code returned 0xc0000016 STATUS_MORE_PROCESSING_REQUIRED [ 48.196605] fs/cifs/smb2maperror.c: Mapping SMB2 status code -1073741802 to POSIX err -5 [ 48.197043] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.210008] fs/cifs/transport.c: Sending smb: smb_len=412 [ 48.211625] fs/cifs/connect.c: RFC1002 header 0x48 [ 48.212060] fs/cifs/smb2misc.c: smb2_check_message length: 0x4c, smb_buf_length: 0x48 [ 48.212494] fs/cifs/smb2misc.c: SMB2 data length 0 offset 72 [ 48.212919] fs/cifs/smb2misc.c: SMB2 len 77 [ 48.213364] fs/cifs/smb2misc.c: Calculated size 77 length 76 mismatch mid 2 [ 48.213807] fs/cifs/transport.c: cifs_sync_mid_result: cmd=1 mid=2 state=4 [ 48.214242] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.219385] fs/cifs/smb2pdu.c: SMB2/3 session established successfully [ 48.219831] fs/cifs/connect.c: CIFS VFS: leaving cifs_get_smb_ses (xid = 1) rc = 0 [ 48.220276] fs/cifs/connect.c: CIFS VFS: in cifs_get_tcon as Xid: 2 with uid: 0 [ 48.220724] fs/cifs/smb2pdu.c: TCON [ 48.221182] fs/cifs/transport.c: Sending smb: smb_len=122 [ 48.221830] fs/cifs/connect.c: RFC1002 header 0x50 [ 48.222280] fs/cifs/smb2misc.c: smb2_check_message length: 0x54, smb_buf_length: 0x50 [ 48.222734] fs/cifs/smb2misc.c: SMB2 len 84 [ 48.223199] fs/cifs/transport.c: cifs_sync_mid_result: cmd=3 mid=3 state=4 [ 48.223656] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.224107] fs/cifs/smb2pdu.c: connection to disk share [ 48.224560] fs/cifs/smb2pdu.c: validate negotiate [ 48.225015] fs/cifs/smb2pdu.c: SMB2 IOCTL [ 48.225456] fs/cifs/transport.c: Sending smb: smb_len=146 [ 48.226049] fs/cifs/connect.c: RFC1002 header 0x49 [ 48.226498] fs/cifs/smb2misc.c: smb2_check_message length: 0x4d, smb_buf_length: 0x49 [ 48.226951] fs/cifs/smb2misc.c: SMB2 data length 0 offset 0 [ 48.227408] fs/cifs/smb2misc.c: SMB2 len 77 [ 48.227863] fs/cifs/transport.c: cifs_sync_mid_result: cmd=11 mid=4 state=4 [ 48.228318] Status code returned 0xc0000022 STATUS_ACCESS_DENIED [ 48.228780] fs/cifs/smb2maperror.c: Mapping SMB2 status code -1073741790 to POSIX err -13 [ 48.229265] fs/cifs/misc.c: Null buffer passed to cifs_small_buf_release [ 48.229732] CIFS VFS: validate protocol negotiate failed: -13 [ 48.230197] fs/cifs/connect.c: CIFS VFS: leaving cifs_get_tcon (xid = 2) rc = -5 [ 48.230681] fs/cifs/connect.c: Tcon rc = -5 [ 48.231150] fs/cifs/connect.c: build_unc_path_to_root: full_path=\\<ip_addr>\TestSMB [ 48.231634] fs/cifs/connect.c: cifs_put_smb_ses: ses_count=1 [ 48.232101] fs/cifs/connect.c: CIFS VFS: in cifs_put_smb_ses as Xid: 3 with uid: 0 [ 48.232569] fs/cifs/smb2pdu.c: disconnect session ffff8800b9189e00 [ 48.233053] fs/cifs/transport.c: Sending smb: smb_len=68 [ 48.233651] fs/cifs/connect.c: RFC1002 header 0x44 [ 48.234116] fs/cifs/smb2misc.c: smb2_check_message length: 0x48, smb_buf_length: 0x44 [ 48.234585] fs/cifs/smb2misc.c: SMB2 len 72 [ 48.235063] fs/cifs/transport.c: cifs_sync_mid_result: cmd=2 mid=5 state=4 [ 48.235541] SendRcvNoRsp flags 64 rc 0 [ 48.236075] fs/cifs/connect.c: CIFS VFS: leaving cifs_mount (xid = 0) rc = -5 [ 48.236556] CIFS VFS: cifs_mount failed w/return code = -5 Any thoughts on what is the right fix for stable kernels? Mounting SMB3 shares works great on mainline (v4.15-rc5). It also works on 4.4.109 if I pass the sec=ntlmsspi option to the mount command (as opposed to the default: sec=ntlmssp). Please let me know if you need any other info. Thank you! Regards, Srivatsa

6 years, 1 month

5
21
0 0

Re: [Linux-stable-mirror] [PATCH 4/4] clk: bcm2835: Make sure the PLL is gated before changing its rate

by Boris Brezillon

-Stephen Warren +Stefan Wahren On Fri, 09 Feb 2018 09:32:40 +0000 Eric Anholt <eric(a)anholt.net> wrote: > Boris Brezillon <boris.brezillon(a)bootlin.com> writes: > > > On Thu, 08 Feb 2018 15:20:16 +0000 > > Eric Anholt <eric(a)anholt.net> wrote: > > > >> Boris Brezillon <boris.brezillon(a)bootlin.com> writes: > >> > >> > All bcm2835 PLLs should be gated before their rate can be changed. > >> > Setting CLK_SET_RATE_GATE will let the core enforce that, but this is > >> > not enough to make the code work in all situations. Indeed, the > >> > CLK_SET_RATE_GATE flag prevents a user from changing the rate while > >> > the clock is enabled, but this check only guarantees there's no Linux > >> > users. In our case, the clock might have been enabled by the > >> > bootloader/FW, and, because we have CLK_IGNORE_UNUSED set, Linux never > >> > disables the PLL. So we have to make sure the PLL is actually disabled > >> > before changing the rate. > >> > > >> > Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") > >> > Cc: <stable(a)vger.kernel.org> > >> > Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> > >> > --- > >> > drivers/clk/bcm/clk-bcm2835.c | 14 +++++++++++++- > >> > 1 file changed, 13 insertions(+), 1 deletion(-) > >> > > >> > diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c > >> > index 6c5d4a8e426c..051ce769c109 100644 > >> > --- a/drivers/clk/bcm/clk-bcm2835.c > >> > +++ b/drivers/clk/bcm/clk-bcm2835.c > >> > @@ -678,6 +678,18 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, > >> > u32 ana[4]; > >> > int i; > >> > > >> > + /* > >> > + * Normally, the CLK_SET_RATE_GATE flag prevents a user from changing > >> > + * the rate while the clock is enabled, but this check only makes sure > >> > + * there's no Linux users. > >> > + * In our case, the clock might have been enabled by the bootloader/FW, > >> > + * and, since CLK_IGNORE_UNUSED flag is set, Linux never disables it. > >> > + * So we have to make sure the clk is actually disabled before changing > >> > + * the rate. > >> > + */ > >> > + if (bcm2835_pll_is_on(hw)) > >> > + bcm2835_pll_off(hw); > >> > + > >> > >> I'm not sure this improves the situation. If the PLL was on, then > >> presumably there's a divider using it and a CM clock using that, so > >> we'll probably end up driving some glitches on them. > > > > Hm, yes, but if someone is trying to change the rate of the PLL, and the > > core doesn't know other clks depend on this PLL (which is the case if > > we reach this point), we're already in big trouble. > > > >> > >> Does the common clk framework have a way to disable unused clocks from > >> the leaf clocks up to this root, before the general > >> disable-unused-clocks path happens late in the boot process? > > > > Not that I know of. What do you have in mind? > > I was hoping that Stephen Boyd or Mike might have an answer for this > problem. Having a generic solution for this sort of issue is definitely the way to go, but I think this temporary hack is needed to make HDMI/SDTV work properly. If we don't have it and the FW configures and enables PLLH with a rate that is different from the one the HDMI or SDTV encoder tries to set, we're screwed, because I doubt the CPRMAN block allows you to change the rate of the PLL when it's not gated. Which means the new rate is not applied and the clk user has no way of knowing that, which in turn means the display output is likely to not work properly the first time it's enabled. Of course, this all goes away the second time the HDMI/SDTV encoder is enabled, because then clk_disable_unprepare() is called which has the effect of disabling the PLL. -- Boris Brezillon, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com

6 years, 1 month

3
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2018