May 2018 - Linux-stable-mirror

[PATCH V4] clk: at91: PLL recalc_rate() now using cached MUL and DIV values

by Marcin Ziemianowicz

When a USB device is connected to the USB host port on the SAM9N12 then you get "-62" error which seems to indicate USB replies from the device are timing out. Based on a logic sniffer, I saw the USB bus was running at half speed. The PLL code uses cached MUL and DIV values which get set in set_rate() and applied in prepare(), but the recalc_rate() function instead queries the hardware instead of using these cached values. Therefore, if recalc_rate() is called between a set_rate() and prepare(), the wrong frequency is calculated and later the USB clock divider for the SAM9N12 SOC will be configured for an incorrect clock. In my case, the PLL hardware was set to 96 Mhz before the OHCI driver loads, and therefore the usb clock divider was being set to /2 even though the OHCI driver set the PLL to 48 Mhz. As an alternative explanation, I noticed this was fixed in the past by 87e2ed338f1b ("clk: at91: fix recalc_rate implementation of PLL driver") but the bug was later re-introduced by 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally"). Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally) Cc: <stable(a)vger.kernel.org> Signed-off-by: Marcin Ziemianowicz <marcin(a)ziemianowicz.com> --- Thank you for bearing with me about this Boris. Changes since V3: Fix for double returns found by kbluild test robot > Comments by Boris Brezillon about email formatting issues Changes since V2: Removed all logging/debug messages I added > Comment by Boris Brezillon about my fix being wrong addressed Changes since V1: Added patch set cover letter Shortened lines which were over >80 characters long > Comment by Greg Kroah-Hartman about "from" field in email addressed > Comment by Alan Stern about redundant debug lines addressed drivers/clk/at91/clk-pll.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c index 7d3223fc..72b6091e 100644 --- a/drivers/clk/at91/clk-pll.c +++ b/drivers/clk/at91/clk-pll.c @@ -132,19 +132,8 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pll *pll = to_clk_pll(hw); - unsigned int pllr; - u16 mul; - u8 div; - - regmap_read(pll->regmap, PLL_REG(pll->id), &pllr); - - div = PLL_DIV(pllr); - mul = PLL_MUL(pllr, pll->layout); - - if (!div || !mul) - return 0; - return (parent_rate / div) * (mul + 1); + return (parent_rate / pll->div) * (pll->mul + 1); } static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate, -- 2.17.0

6 years, 6 months

3
4
0 0

[PATCH] drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful

by Thomas Hellstrom

From: Deepak Rawat <drawat(a)vmware.com> SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO (and not call a new vmw_dmabuf_init) when a new fb size is same as current fb. This was changed in a recent commit which is causing page_flip to fail on VM with low display memory and multi-mon failure when cycle monitors from secondary display. Cc: <stable(a)vger.kernel.org> # 4.14, 4.16 Fixes: 20fb5a635a0c ("drm/vmwgfx: Unpin the screen object backup buffer when not used") Signed-off-by: Deepak Rawat <drawat(a)vmware.com> Reviewed-by: Sinclair Yeh <syeh(a)vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom(a)vmware.com> --- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c index 648f8127f65a..3d667e903beb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c @@ -482,6 +482,8 @@ vmw_sou_primary_plane_prepare_fb(struct drm_plane *plane, return ret; } + vps->dmabuf_size = size; + /* * TTM already thinks the buffer is pinned, but make sure the * pin_count is upped. -- 2.14.3

6 years, 6 months

1
0
0 0

[PATCH 3/3] MIPS: Add DSP ASE regset support

by Maciej W. Rozycki

Define an NT_MIPS_DSP core file note type and implement a corresponding regset holding the DSP ASE register context, following the layout of the `mips_dsp_state' structure, except for the DSPControl register stored as a 64-bit rather than 32-bit quantity in a 64-bit note. The lack of DSP ASE register saving to core files can be considered a design flaw with commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE."), leading to an incomplete state being saved. Consequently no DSP ASE regset has been created with commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view."), when regset support was added to the MIPS port. Additionally there is no way for ptrace(2) to correctly access the DSP accumulator registers in n32 processes with the existing interfaces. This is due to 32-bit truncation of data passed with PTRACE_PEEKUSR and PTRACE_POKEUSR requests, which cannot be avoided owing to how the data types for ptrace(3) have been defined. This new NT_MIPS_DSP regset fills the missing interface gap. Cc: <stable(a)vger.kernel.org> # 3.13+ Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.") Signed-off-by: Maciej W. Rozycki <macro(a)mips.com> --- Hi, This was verified with 32-bit DSP and non-DSP hardware configurations by dumping cores and examining, with `readelf', the notes created. In the former case DSP registers were filled with patterns by the program being crashed and the patterns verified in the core file produced. I have no 64-bit DSP hardware handy, but the same code has been used, except for the data type holding register data, for both 32-bit and 64-bit notes, so it should be obviously correct. As noted in the commit description I consider it a design flaw and therefore I think it makes sense to backport this change and propose doing so. Maciej --- arch/mips/kernel/ptrace.c | 189 ++++++++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/elf.h | 1 2 files changed, 190 insertions(+) linux-mips-regset-dsp.diff Index: linux-jhogan-test/arch/mips/kernel/ptrace.c =================================================================== --- linux-jhogan-test.orig/arch/mips/kernel/ptrace.c 2018-05-09 23:26:36.787614000 +0100 +++ linux-jhogan-test/arch/mips/kernel/ptrace.c 2018-05-09 23:53:18.864657000 +0100 @@ -41,6 +41,7 @@ #include <asm/mipsmtregs.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/processor.h> #include <asm/syscall.h> #include <linux/uaccess.h> #include <asm/bootinfo.h> @@ -589,9 +590,179 @@ static int fpr_set(struct task_struct *t return err; } +#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32) + +/* + * Copy the DSP context to the supplied 32-bit NT_MIPS_DSP buffer. + */ +static int dsp32_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + unsigned int start, num_regs, i; + u32 dspregs[NUM_DSP_REGS + 1]; + + BUG_ON(count % sizeof(u32)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u32); + num_regs = count / sizeof(u32); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + dspregs[i] = target->thread.dsp.dspr[i]; + break; + case NUM_DSP_REGS: + dspregs[i] = target->thread.dsp.dspcontrol; + break; + } + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); +} + +/* + * Copy the supplied 32-bit NT_MIPS_DSP buffer to the DSP context. + */ +static int dsp32_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + unsigned int start, num_regs, i; + u32 dspregs[NUM_DSP_REGS + 1]; + int err; + + BUG_ON(count % sizeof(u32)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u32); + num_regs = count / sizeof(u32); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + target->thread.dsp.dspr[i] = (s32)dspregs[i]; + break; + case NUM_DSP_REGS: + target->thread.dsp.dspcontrol = (s32)dspregs[i]; + break; + } + + return 0; +} + +#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */ + +#ifdef CONFIG_64BIT + +/* + * Copy the DSP context to the supplied 64-bit NT_MIPS_DSP buffer. + */ +static int dsp64_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + unsigned int start, num_regs, i; + u64 dspregs[NUM_DSP_REGS + 1]; + + BUG_ON(count % sizeof(u64)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u64); + num_regs = count / sizeof(u64); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + dspregs[i] = target->thread.dsp.dspr[i]; + break; + case NUM_DSP_REGS: + dspregs[i] = target->thread.dsp.dspcontrol; + break; + } + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); +} + +/* + * Copy the supplied 64-bit NT_MIPS_DSP buffer to the DSP context. + */ +static int dsp64_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + unsigned int start, num_regs, i; + u64 dspregs[NUM_DSP_REGS + 1]; + int err; + + BUG_ON(count % sizeof(u64)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u64); + num_regs = count / sizeof(u64); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + target->thread.dsp.dspr[i] = dspregs[i]; + break; + case NUM_DSP_REGS: + target->thread.dsp.dspcontrol = dspregs[i]; + break; + } + + return 0; +} + +#endif /* CONFIG_64BIT */ + +/* + * Determine whether the DSP context is present. + */ +static int dsp_active(struct task_struct *target, + const struct user_regset *regset) +{ + return cpu_has_dsp ? NUM_DSP_REGS + 1 : -ENODEV; +} + enum mips_regset { REGSET_GPR, REGSET_FPR, + REGSET_DSP, }; struct pt_regs_offset { @@ -697,6 +868,15 @@ static const struct user_regset mips_reg .get = fpr_get, .set = fpr_set, }, + [REGSET_DSP] = { + .core_note_type = NT_MIPS_DSP, + .n = NUM_DSP_REGS + 1, + .size = sizeof(u32), + .align = sizeof(u32), + .get = dsp32_get, + .set = dsp32_set, + .active = dsp_active, + }, }; static const struct user_regset_view user_mips_view = { @@ -728,6 +908,15 @@ static const struct user_regset mips64_r .get = fpr_get, .set = fpr_set, }, + [REGSET_DSP] = { + .core_note_type = NT_MIPS_DSP, + .n = NUM_DSP_REGS + 1, + .size = sizeof(u64), + .align = sizeof(u64), + .get = dsp64_get, + .set = dsp64_set, + .active = dsp_active, + }, }; static const struct user_regset_view user_mips64_view = { Index: linux-jhogan-test/include/uapi/linux/elf.h =================================================================== --- linux-jhogan-test.orig/include/uapi/linux/elf.h 2018-05-09 23:22:44.799797000 +0100 +++ linux-jhogan-test/include/uapi/linux/elf.h 2018-05-09 23:51:32.646880000 +0100 @@ -424,6 +424,7 @@ typedef struct elf64_shdr { #define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */ #define NT_METAG_TLS 0x502 /* Metag TLS pointer */ #define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ +#define NT_MIPS_DSP 0x700 /* MIPS DSP ASE registers */ /* Note header in a PT_NOTE section */ typedef struct elf32_note {

6 years, 6 months

1
0
0 0

[PATCH 2/3] MIPS: Correct the 64-bit DSP accumulator register size

by Maciej W. Rozycki

Use the `unsigned long' rather than `__u32' type for DSP accumulator registers, like with the regular MIPS multiply/divide accumulator and general-purpose registers, as all are 64-bit in 64-bit implementations and using a 32-bit data type leads to contents truncation on context saving. Update `arch_ptrace' and `compat_arch_ptrace' accordingly, removing casts that are similarly not used with multiply/divide accumulator or general-purpose register accesses. Cc: stable(a)vger.kernel.org # 2.6.15+ Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") Signed-off-by: Maciej W. Rozycki <macro(a)mips.com> --- Hi, I have no 64-bit DSP hardware handy to verify this change, however some surely exists and is used to run Linux, as indicated by GDB PR gdb/22286, <https://sourceware.org/bugzilla/show_bug.cgi?id=22286>, so we better get it right before people start screaming. Maciej --- arch/mips/include/asm/processor.h | 2 +- arch/mips/kernel/ptrace.c | 2 +- arch/mips/kernel/ptrace32.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) linux-mips-dsp64.diff Index: linux-jhogan-test/arch/mips/include/asm/processor.h =================================================================== --- linux-jhogan-test.orig/arch/mips/include/asm/processor.h 2018-03-21 17:13:52.000000000 +0000 +++ linux-jhogan-test/arch/mips/include/asm/processor.h 2018-05-09 22:35:33.248559000 +0100 @@ -141,7 +141,7 @@ struct mips_fpu_struct { #define NUM_DSP_REGS 6 -typedef __u32 dspreg_t; +typedef unsigned long dspreg_t; struct mips_dsp_state { dspreg_t dspr[NUM_DSP_REGS]; Index: linux-jhogan-test/arch/mips/kernel/ptrace.c =================================================================== --- linux-jhogan-test.orig/arch/mips/kernel/ptrace.c 2018-05-09 22:34:00.000000000 +0100 +++ linux-jhogan-test/arch/mips/kernel/ptrace.c 2018-05-09 22:37:45.416608000 +0100 @@ -856,7 +856,7 @@ long arch_ptrace(struct task_struct *chi goto out; } dregs = __get_dsp_regs(child); - tmp = (unsigned long) (dregs[addr - DSP_BASE]); + tmp = dregs[addr - DSP_BASE]; break; } case DSP_CONTROL: Index: linux-jhogan-test/arch/mips/kernel/ptrace32.c =================================================================== --- linux-jhogan-test.orig/arch/mips/kernel/ptrace32.c 2018-03-21 17:13:52.000000000 +0000 +++ linux-jhogan-test/arch/mips/kernel/ptrace32.c 2018-05-09 22:45:50.924418000 +0100 @@ -142,7 +142,7 @@ long compat_arch_ptrace(struct task_stru goto out; } dregs = __get_dsp_regs(child); - tmp = (unsigned long) (dregs[addr - DSP_BASE]); + tmp = dregs[addr - DSP_BASE]; break; } case DSP_CONTROL:

6 years, 6 months

1
0
0 0

+ kernel-sys-fix-potential-spectre-v1.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: kernel/sys.c: fix potential Spectre v1 issue has been added to the -mm tree. Its filename is kernel-sys-fix-potential-spectre-v1.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/kernel-sys-fix-potential-spectre-v… and later at http://ozlabs.org/~akpm/mmotm/broken-out/kernel-sys-fix-potential-spectre-v… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: "Gustavo A. R. Silva" <gustavo(a)embeddedor.com> Subject: kernel/sys.c: fix potential Spectre v1 issue `resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo(a)embeddedor.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Alexei Starovoitov <ast(a)kernel.org> Cc: Dan Williams <dan.j.williams(a)intel.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- kernel/sys.c | 5 +++++ 1 file changed, 5 insertions(+) diff -puN kernel/sys.c~kernel-sys-fix-potential-spectre-v1 kernel/sys.c --- a/kernel/sys.c~kernel-sys-fix-potential-spectre-v1 +++ a/kernel/sys.c @@ -69,6 +69,9 @@ #include <asm/io.h> #include <asm/unistd.h> +/* Hardening for Spectre-v1 */ +#include <linux/nospec.h> + #include "uid16.h" #ifndef SET_UNALIGN_CTL @@ -1451,6 +1454,7 @@ SYSCALL_DEFINE2(old_getrlimit, unsigned if (resource >= RLIM_NLIMITS) return -EINVAL; + resource = array_index_nospec(resource, RLIM_NLIMITS); task_lock(current->group_leader); x = current->signal->rlim[resource]; task_unlock(current->group_leader); @@ -1470,6 +1474,7 @@ COMPAT_SYSCALL_DEFINE2(old_getrlimit, un if (resource >= RLIM_NLIMITS) return -EINVAL; + resource = array_index_nospec(resource, RLIM_NLIMITS); task_lock(current->group_leader); r = current->signal->rlim[resource]; task_unlock(current->group_leader); _ Patches currently in -mm which might be from gustavo(a)embeddedor.com are kernel-sys-fix-potential-spectre-v1.patch

6 years, 6 months

1
0
0 0

[PATCH] clk:aspeed: Fix reset bits for PCI/VGA and PECI

by Jae Hyun Yoo

This commit fixes incorrect setting of reset bits for PCI/VGA and PECI modules. 1. Reset bit for PCI/VGA is 8. 2. PECI reset bit is missing so added bit 10 as its reset bit. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo(a)linux.intel.com> Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Cc: stable <stable(a)vger.kernel.org> --- drivers/clk/clk-aspeed.c | 4 ++-- include/dt-bindings/clock/aspeed-clock.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 5eb50c31e455..2c23e7d7ba28 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -88,7 +88,7 @@ static const struct aspeed_gate_data aspeed_gates[] = { [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ - [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ + [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ @@ -297,7 +297,7 @@ static const u8 aspeed_resets[] = { [ASPEED_RESET_JTAG_MASTER] = 22, [ASPEED_RESET_MIC] = 18, [ASPEED_RESET_PWM] = 9, - [ASPEED_RESET_PCIVGA] = 8, + [ASPEED_RESET_PECI] = 10, [ASPEED_RESET_I2C] = 2, [ASPEED_RESET_AHB] = 1, }; diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h index d3558d897a4d..8d69b9134bef 100644 --- a/include/dt-bindings/clock/aspeed-clock.h +++ b/include/dt-bindings/clock/aspeed-clock.h @@ -45,7 +45,7 @@ #define ASPEED_RESET_JTAG_MASTER 3 #define ASPEED_RESET_MIC 4 #define ASPEED_RESET_PWM 5 -#define ASPEED_RESET_PCIVGA 6 +#define ASPEED_RESET_PECI 6 #define ASPEED_RESET_I2C 7 #define ASPEED_RESET_AHB 8 -- 2.17.0

6 years, 6 months

3
3
0 0

[PATCH v2 3/3] x86/mm: add TLB purge to free pmd/pte page interfaces

by Toshi Kani

ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani(a)hpe.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: <stable(a)vger.kernel.org> --- arch/x86/mm/pgtable.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index f60fdf411103..7e96594c7e97 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -721,24 +721,42 @@ int pmd_clear_huge(pmd_t *pmd) * @pud: Pointer to a PUD. * @addr: Virtual address associated with pud. * - * Context: The pud range has been unmaped and TLB purged. + * Context: The pud range has been unmapped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ int pud_free_pmd_page(pud_t *pud, unsigned long addr) { - pmd_t *pmd; + pmd_t *pmd, *pmd_sv; + pte_t *pte; int i; if (pud_none(*pud)) return 1; pmd = (pmd_t *)pud_page_vaddr(*pud); + pmd_sv = (pmd_t *)__get_free_page(GFP_KERNEL); + if (!pmd_sv) + return 0; - for (i = 0; i < PTRS_PER_PMD; i++) - if (!pmd_free_pte_page(&pmd[i], addr + (i * PMD_SIZE))) - return 0; + for (i = 0; i < PTRS_PER_PMD; i++) { + pmd_sv[i] = pmd[i]; + if (!pmd_none(pmd[i])) + pmd_clear(&pmd[i]); + } pud_clear(pud); + + /* INVLPG to clear all paging-structure caches */ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE-1); + + for (i = 0; i < PTRS_PER_PMD; i++) { + if (!pmd_none(pmd_sv[i])) { + pte = (pte_t *)pmd_page_vaddr(pmd_sv[i]); + free_page((unsigned long)pte); + } + } + + free_page((unsigned long)pmd_sv); free_page((unsigned long)pmd); return 1; @@ -749,7 +767,7 @@ int pud_free_pmd_page(pud_t *pud, unsigned long addr) * @pmd: Pointer to a PMD. * @addr: Virtual address associated with pmd. * - * Context: The pmd range has been unmaped and TLB purged. + * Context: The pmd range has been unmapped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) @@ -761,6 +779,10 @@ int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) pte = (pte_t *)pmd_page_vaddr(*pmd); pmd_clear(pmd); + + /* INVLPG to clear all paging-structure caches */ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE-1); + free_page((unsigned long)pte); return 1;

6 years, 6 months

1
0
0 0

[PATCH v2 2/3] ioremap: Update pgtable free interfaces with addr

by Toshi Kani

From: Chintan Pandya <cpandya(a)codeaurora.org> This patch ("mm/vmalloc: Add interfaces to free unmapped page table") adds following 2 interfaces to free the page table in case we implement huge mapping. pud_free_pmd_page() and pmd_free_pte_page() Some architectures (like arm64) needs to do proper TLB maintanance after updating pagetable entry even in map. Why ? Read this, https://patchwork.kernel.org/patch/10134581/ Pass 'addr' in these interfaces so that proper TLB ops can be performed. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya(a)codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani(a)hpe.com> Cc: <stable(a)vger.kernel.org> --- arch/arm64/mm/mmu.c | 4 ++-- arch/x86/mm/pgtable.c | 8 +++++--- include/asm-generic/pgtable.h | 8 ++++---- lib/ioremap.c | 4 ++-- 4 files changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 2dbb2c9f1ec1..da98828609a1 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -973,12 +973,12 @@ int pmd_clear_huge(pmd_t *pmdp) return 1; } -int pud_free_pmd_page(pud_t *pud) +int pud_free_pmd_page(pud_t *pud, unsigned long addr) { return pud_none(*pud); } -int pmd_free_pte_page(pmd_t *pmd) +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { return pmd_none(*pmd); } diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 08cdd7c13619..f60fdf411103 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -719,11 +719,12 @@ int pmd_clear_huge(pmd_t *pmd) /** * pud_free_pmd_page - Clear pud entry and free pmd page. * @pud: Pointer to a PUD. + * @addr: Virtual address associated with pud. * * Context: The pud range has been unmaped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ -int pud_free_pmd_page(pud_t *pud) +int pud_free_pmd_page(pud_t *pud, unsigned long addr) { pmd_t *pmd; int i; @@ -734,7 +735,7 @@ int pud_free_pmd_page(pud_t *pud) pmd = (pmd_t *)pud_page_vaddr(*pud); for (i = 0; i < PTRS_PER_PMD; i++) - if (!pmd_free_pte_page(&pmd[i])) + if (!pmd_free_pte_page(&pmd[i], addr + (i * PMD_SIZE))) return 0; pud_clear(pud); @@ -746,11 +747,12 @@ int pud_free_pmd_page(pud_t *pud) /** * pmd_free_pte_page - Clear pmd entry and free pte page. * @pmd: Pointer to a PMD. + * @addr: Virtual address associated with pmd. * * Context: The pmd range has been unmaped and TLB purged. * Return: 1 if clearing the entry succeeded. 0 otherwise. */ -int pmd_free_pte_page(pmd_t *pmd) +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { pte_t *pte; diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index f59639afaa39..b081794ba135 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -1019,8 +1019,8 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot); int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot); int pud_clear_huge(pud_t *pud); int pmd_clear_huge(pmd_t *pmd); -int pud_free_pmd_page(pud_t *pud); -int pmd_free_pte_page(pmd_t *pmd); +int pud_free_pmd_page(pud_t *pud, unsigned long addr); +int pmd_free_pte_page(pmd_t *pmd, unsigned long addr); #else /* !CONFIG_HAVE_ARCH_HUGE_VMAP */ static inline int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot) { @@ -1046,11 +1046,11 @@ static inline int pmd_clear_huge(pmd_t *pmd) { return 0; } -static inline int pud_free_pmd_page(pud_t *pud) +static inline int pud_free_pmd_page(pud_t *pud, unsigned long addr) { return 0; } -static inline int pmd_free_pte_page(pmd_t *pmd) +static inline int pmd_free_pte_page(pmd_t *pmd, unsigned long addr) { return 0; } diff --git a/lib/ioremap.c b/lib/ioremap.c index 54e5bbaa3200..517f5853ffed 100644 --- a/lib/ioremap.c +++ b/lib/ioremap.c @@ -92,7 +92,7 @@ static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr, if (ioremap_pmd_enabled() && ((next - addr) == PMD_SIZE) && IS_ALIGNED(phys_addr + addr, PMD_SIZE) && - pmd_free_pte_page(pmd)) { + pmd_free_pte_page(pmd, addr)) { if (pmd_set_huge(pmd, phys_addr + addr, prot)) continue; } @@ -119,7 +119,7 @@ static inline int ioremap_pud_range(p4d_t *p4d, unsigned long addr, if (ioremap_pud_enabled() && ((next - addr) == PUD_SIZE) && IS_ALIGNED(phys_addr + addr, PUD_SIZE) && - pud_free_pmd_page(pud)) { + pud_free_pmd_page(pud, addr)) { if (pud_set_huge(pud, phys_addr + addr, prot)) continue; }

6 years, 6 months

1
0
0 0

+ mm-dont-allow-deferred-pages-with-need_per_cpu_km.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm: don't allow deferred pages with NEED_PER_CPU_KM has been added to the -mm tree. Its filename is mm-dont-allow-deferred-pages-with-need_per_cpu_km.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-dont-allow-deferred-pages-with-… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-dont-allow-deferred-pages-with-… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Pavel Tatashin <pasha.tatashin(a)oracle.com> Subject: mm: don't allow deferred pages with NEED_PER_CPU_KM It is unsafe to do virtual to physical translations before mm_init() is called if struct page is needed in order to determine the memory section number (see SECTION_IN_PAGE_FLAGS). This is because only in mm_init() we initialize struct pages for all the allocated memory when deferred struct pages are used. My recent fix c9e97a1997 ("mm: initialize pages on demand during boot") exposed this problem, because it greatly reduced number of pages that are initialized before mm_init(), but the problem existed even before my fix, as Fengguang Wu found. Below is a more detailed explanation of the problem. We initialize struct pages in four places: 1. Early in boot a small set of struct pages is initialized to fill the first section, and lower zones. 2. During mm_init() we initialize "struct pages" for all the memory that is allocated, i.e reserved in memblock. 3. Using on-demand logic when pages are allocated after mm_init call (when memblock is finished) 4. After smp_init() when the rest free deferred pages are initialized. The problem occurs if we try to do va to phys translation of a memory between steps 1 and 2. Because we have not yet initialized struct pages for all the reserved pages, it is inherently unsafe to do va to phys if the translation itself requires access of "struct page" as in case of this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP The following path exposes the problem: start_kernel() trap_init() setup_cpu_entry_areas() setup_cpu_entry_area(cpu) get_cpu_gdt_paddr(cpu) per_cpu_ptr_to_phys(addr) pcpu_addr_to_page(addr) virt_to_page(addr) pfn_to_page(__pa(addr) >> PAGE_SHIFT) We disable this path by not allowing NEED_PER_CPU_KM with deferred struct pages feature. The problems are discussed in these threads: http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel… http://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel… http://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Steven Sistare <steven.sistare(a)oracle.com> Cc: Daniel Jordan <daniel.m.jordan(a)oracle.com> Cc: Mel Gorman <mgorman(a)techsingularity.net> Cc: Fengguang Wu <fengguang.wu(a)intel.com> Cc: Dennis Zhou <dennisszhou(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff -puN mm/Kconfig~mm-dont-allow-deferred-pages-with-need_per_cpu_km mm/Kconfig --- a/mm/Kconfig~mm-dont-allow-deferred-pages-with-need_per_cpu_km +++ a/mm/Kconfig @@ -636,6 +636,7 @@ config DEFERRED_STRUCT_PAGE_INIT default n depends on NO_BOOTMEM depends on !FLATMEM + depends on !NEED_PER_CPU_KM help Ordinarily all struct pages are initialised during early boot in a single thread. On very large machines this can take a considerable _ Patches currently in -mm which might be from pasha.tatashin(a)oracle.com are mm-dont-allow-deferred-pages-with-need_per_cpu_km.patch sparc64-ng4-memset-32-bits-overflow.patch

6 years, 6 months

1
0
0 0

Re: ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c

by Mark Salyzyn

ToT commit 97f3c0a4b0579b646b6b10ae5a3d59f0441cc12c (ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c) was assigned CVE-2017-13695 https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-13695 and has been public since August 25 2017 Please apply to 3.18, 4.4 and 4.9 stable kernels for the reasons outlined in the body of the patch: "This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR." Bonus Points: Since the patch is ToT upstream, relieving the bug that results in the memory leak, even despite the non-CVE security status for <=4.12 kernels, it may be advised to also include this patch in 4.14.y stable as well. Sincerely -- Mark Salyzyn

6 years, 6 months

3
5
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2018