June 2018 - Linux-stable-mirror

[PATCH v2 3/7] vmw_balloon: VMCI_DOORBELL_SET does not check status

by Nadav Amit

When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for some reason it does not consider the status and looks at the result. However, the hypervisor does not update the result - it updates the status. This might cause VMCI doorbell not to be enabled, resulting in degraded performance. Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI") Cc: stable(a)vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard(a)vmware.com> Signed-off-by: Nadav Amit <namit(a)vmware.com> --- drivers/misc/vmw_balloon.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index 60ab83d3d0ef..a7df4c24a28d 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -1036,29 +1036,30 @@ static void vmballoon_vmci_cleanup(struct vmballoon *b) */ static int vmballoon_vmci_init(struct vmballoon *b) { - int error = 0; + unsigned long error, dummy; - if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) != 0) { - error = vmci_doorbell_create(&b->vmci_doorbell, - VMCI_FLAG_DELAYED_CB, - VMCI_PRIVILEGE_FLAG_RESTRICTED, - vmballoon_doorbell, b); - - if (error == VMCI_SUCCESS) { - VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET, - b->vmci_doorbell.context, - b->vmci_doorbell.resource, error); - STATS_INC(b->stats.doorbell_set); - } - } + if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) == 0) + return 0; - if (error != 0) { - vmballoon_vmci_cleanup(b); + error = vmci_doorbell_create(&b->vmci_doorbell, VMCI_FLAG_DELAYED_CB, + VMCI_PRIVILEGE_FLAG_RESTRICTED, + vmballoon_doorbell, b); - return -EIO; - } + if (error != VMCI_SUCCESS) + goto fail; + + error = VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET, b->vmci_doorbell.context, + b->vmci_doorbell.resource, dummy); + + STATS_INC(b->stats.doorbell_set); + + if (error != VMW_BALLOON_SUCCESS) + goto fail; return 0; +fail: + vmballoon_vmci_cleanup(b); + return -EIO; } /* -- 2.17.0

6 years, 8 months

1
0
0 0

[PATCH v2 2/7] vmw_balloon: do not use 2MB without batching

by Nadav Amit

If the hypervisor sets 2MB batching is on, while batching is cleared, the balloon code breaks. In this case the legacy mechanism is used with 2MB page. The VM would report a 2MB page is ballooned, and the hypervisor would only take the first 4KB. While the hypervisor should not report such settings, make the code more robust by not enabling 2MB support without batching. Fixes: 365bd7ef7ec8e ("VMware balloon: Support 2m page ballooning.") Cc: stable(a)vger.kernel.org Reviewed-by: Xavier Deguillard <xdeguillard(a)vmware.com> Signed-off-by: Nadav Amit <nadav.amit(a)gmail.com> --- drivers/misc/vmw_balloon.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c index 28e77ab1e136..60ab83d3d0ef 100644 --- a/drivers/misc/vmw_balloon.c +++ b/drivers/misc/vmw_balloon.c @@ -341,7 +341,13 @@ static bool vmballoon_send_start(struct vmballoon *b, unsigned long req_caps) success = false; } - if (b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS) + /* + * 2MB pages are only supported with batching. If batching is for some + * reason disabled, do not use 2MB pages, since otherwise the legacy + * mechanism is used with 2MB pages, causing a failure. + */ + if ((b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS) && + (b->capabilities & VMW_BALLOON_BATCHED_CMDS)) b->supported_page_sizes = 2; else b->supported_page_sizes = 1; -- 2.17.0

6 years, 8 months

1
0
0 0

[PATCH] HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large

by Jason Gerecke

The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by: Jason Gerecke <jason.gerecke(a)wacom.com> CC: stable(a)vger.kernel.org # v4.10+ --- drivers/hid/wacom_sys.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index ee7a37eb159a..545986cfb978 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -395,6 +395,14 @@ static void wacom_usage_mapping(struct hid_device *hdev, } } + /* 2nd-generation Intuos Pro Large has incorrect Y maximum */ + if (hdev->vendor == USB_VENDOR_ID_WACOM && + hdev->product == 0x0358 && + WACOM_PEN_FIELD(field) && + wacom_equivalent_usage(usage->hid) == HID_GD_Y) { + field->logical_maximum = 43200; + } + switch (usage->hid) { case HID_GD_X: features->x_max = field->logical_maximum; -- 2.17.1

6 years, 8 months

2
1
0 0

[PATCH] hid: intel_ish-hid: ipc: register more pm callbacks to support hibernation

by Even Xu

Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable(a)vger.kernel.org Signed-off-by: Even Xu <even.xu(a)intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 582e449..a2c53ea 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -205,8 +205,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } -#ifdef CONFIG_PM -static struct device *ish_resume_device; +static struct device __maybe_unused *ish_resume_device; /* 50ms to get resume response */ #define WAIT_FOR_RESUME_ACK_MS 50 @@ -220,7 +219,7 @@ static struct device *ish_resume_device; * in that case a simple resume message is enough, others we need * a reset sequence. */ -static void ish_resume_handler(struct work_struct *work) +static void __maybe_unused ish_resume_handler(struct work_struct *work) { struct pci_dev *pdev = to_pci_dev(ish_resume_device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -262,7 +261,7 @@ static void ish_resume_handler(struct work_struct *work) * * Return: 0 to the pm core */ -static int ish_suspend(struct device *device) +static int __maybe_unused ish_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -288,7 +287,7 @@ static int ish_suspend(struct device *device) return 0; } -static DECLARE_WORK(resume_work, ish_resume_handler); +static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler); /** * ish_resume() - ISH resume callback * @device: device pointer @@ -297,7 +296,7 @@ static DECLARE_WORK(resume_work, ish_resume_handler); * * Return: 0 to the pm core */ -static int ish_resume(struct device *device) +static int __maybe_unused ish_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -311,21 +310,14 @@ static int ish_resume(struct device *device) return 0; } -static const struct dev_pm_ops ish_pm_ops = { - .suspend = ish_suspend, - .resume = ish_resume, -}; -#define ISHTP_ISH_PM_OPS (&ish_pm_ops) -#else -#define ISHTP_ISH_PM_OPS NULL -#endif /* CONFIG_PM */ +static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume); static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, .id_table = ish_pci_tbl, .probe = ish_probe, .remove = ish_remove, - .driver.pm = ISHTP_ISH_PM_OPS, + .driver.pm = &ish_pm_ops, }; module_pci_driver(ish_driver); -- 2.7.4

6 years, 8 months

2
1
0 0

[PATCH] pinctrl: devicetree: Fix pctldev pointer overwrite

by Fabio Estevam

From: Fabio Estevam <fabio.estevam(a)nxp.com> Commit b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs") causes the pinctrl hog pins to not get initialized on i.MX platforms leaving them with the IOMUX settings untouched. This causes several regressions on i.MX such as: - OV5640 camera driver can not be probed anymore on imx6qdl-sabresd because the camera clock pin is in a pinctrl_hog group and since its pinctrl initialization is skipped, the camera clock is kept in GPIO functionality instead of CLK_CKO function. - Audio stopped working on imx6qdl-wandboard and imx53-qsb for the same reason. Richard Fitzgerald explains the problem: "I see the bug. If the hog node isn't a 1st level child of the pinctrl parent node it will go around the for(;;) loop again but on the first pass I overwrite pctldev with the result of get_pinctrl_dev_from_of_node() so it doesn't point to the pinctrl driver any more." Fix the issue by stashing the original pctldev so it doesn't get overwritten. Fixes: b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs") Cc: <stable(a)vger.kernel.org> Reported-by: Mika Penttilä <mika.penttila(a)nextfour.com> Reported-by: Steve Longerbeam <slongerbeam(a)gmail.com> Suggested-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- drivers/pinctrl/devicetree.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index b601039..c4aa411 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -101,10 +101,11 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np) } static int dt_to_map_one_config(struct pinctrl *p, - struct pinctrl_dev *pctldev, + struct pinctrl_dev *hog_pctldev, const char *statename, struct device_node *np_config) { + struct pinctrl_dev *pctldev = NULL; struct device_node *np_pctldev; const struct pinctrl_ops *ops; int ret; @@ -123,8 +124,10 @@ static int dt_to_map_one_config(struct pinctrl *p, return -EPROBE_DEFER; } /* If we're creating a hog we can use the passed pctldev */ - if (pctldev && (np_pctldev == p->dev->of_node)) + if (hog_pctldev && (np_pctldev == p->dev->of_node)) { + pctldev = hog_pctldev; break; + } pctldev = get_pinctrl_dev_from_of_node(np_pctldev); if (pctldev) break; -- 2.7.4

6 years, 8 months

4
3
0 0

[PATCH] crypto: ccree: fix iv copying for small buffers

by Gilad Ben-Yossef

We are copying our last cipher block into the request for use as IV as required by the Crypto API but we failed to handle correctly the case the buffer we are working on is smaller than a block. Fix it by calculating how much we need to copy based on buffer size. CC: stable(a)vger.kernel.org Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support") Reported by: Hadar Gat <hadar.gat(a)arm.com> Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> --- drivers/crypto/ccree/cc_cipher.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/ccree/cc_cipher.c b/drivers/crypto/ccree/cc_cipher.c index d2810c1..a07547f 100644 --- a/drivers/crypto/ccree/cc_cipher.c +++ b/drivers/crypto/ccree/cc_cipher.c @@ -616,9 +616,18 @@ static void cc_cipher_complete(struct device *dev, void *cc_req, int err) memcpy(req->iv, req_ctx->backup_info, ivsize); kzfree(req_ctx->backup_info); } else if (!err) { - scatterwalk_map_and_copy(req->iv, req->dst, - (req->cryptlen - ivsize), - ivsize, 0); + unsigned int len; + + if (req->cryptlen > ivsize) { + len = req->cryptlen - ivsize; + } else { + memset(req->iv, 0, ivsize); + len = 0; + ivsize = req->cryptlen; + + } + + scatterwalk_map_and_copy(req->iv, req->dst, len, ivsize, 0); } skcipher_request_complete(req, err); @@ -755,17 +764,26 @@ static int cc_cipher_decrypt(struct skcipher_request *req) struct cipher_req_ctx *req_ctx = skcipher_request_ctx(req); unsigned int ivsize = crypto_skcipher_ivsize(sk_tfm); gfp_t flags = cc_gfp_flags(&req->base); + unsigned int len; /* * Allocate and save the last IV sized bytes of the source, which will * be lost in case of in-place decryption and might be needed for CTS. */ - req_ctx->backup_info = kmalloc(ivsize, flags); + req_ctx->backup_info = kzalloc(ivsize, flags); if (!req_ctx->backup_info) return -ENOMEM; - scatterwalk_map_and_copy(req_ctx->backup_info, req->src, - (req->cryptlen - ivsize), ivsize, 0); + + if (req->cryptlen > ivsize) { + len = req->cryptlen - ivsize; + } else { + len = 0; + ivsize = req->cryptlen; + } + + scatterwalk_map_and_copy(req_ctx->backup_info, req->src, len, ivsize, + 0); req_ctx->is_giv = false; return cc_cipher_process(req, DRV_CRYPTO_DIRECTION_DECRYPT); -- 2.7.4

6 years, 8 months

3
3
0 0

[PATCH] ubifs: Fix memory leak in lprobs self-check

by Richard Weinberger

Allocate the buffer after we return early. Otherwise memory is being leaked. Cc: <stable(a)vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard(a)nod.at> --- fs/ubifs/lprops.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c index f5a46844340c..8ade493a423a 100644 --- a/fs/ubifs/lprops.c +++ b/fs/ubifs/lprops.c @@ -1089,10 +1089,6 @@ static int scan_check_cb(struct ubifs_info *c, } } - buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL); - if (!buf) - return -ENOMEM; - /* * After an unclean unmount, empty and freeable LEBs * may contain garbage - do not scan them. @@ -1111,6 +1107,10 @@ static int scan_check_cb(struct ubifs_info *c, return LPT_SCAN_CONTINUE; } + buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL); + if (!buf) + return -ENOMEM; + sleb = ubifs_scan(c, lnum, 0, buf, 0); if (IS_ERR(sleb)) { ret = PTR_ERR(sleb); -- 2.13.6

6 years, 8 months

1
0
0 0

[PATCH 4.9] dm bufio: avoid false-positive Wmaybe-uninitialized warning

by Nathan Chancellor

From: Arnd Bergmann <arnd(a)arndb.de> commit 590347e4000356f55eb10b03ced2686bd74dab40 upstream. gcc-6.3 and earlier show a new warning after a seemingly unrelated change to the arm64 PAGE_KERNEL definition: In file included from drivers/md/dm-bufio.c:14:0: drivers/md/dm-bufio.c: In function 'alloc_buffer': include/linux/sched/mm.h:182:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized] current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags; ^ The same warning happened earlier on linux-3.18 for MIPS and I did a workaround for that, but now it's come back. gcc-7 and newer are apparently smart enough to figure this out, and other architectures don't show it, so the best I could come up with is to rework the caller slightly in a way that makes it obvious enough to all arm64 compilers what is happening here. Fixes: 41acec624087 ("arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()") Link: https://patchwork.kernel.org/patch/9692829/ Cc: stable(a)vger.kernel.org Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> [snitzer: moved declarations inside conditional, altered vmalloc return] Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> [nc: Backport to 4.9, adjust context for lack of 19809c2da28a] Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> --- Hi Greg, Resending this with a proper prefix and message, in case the other one fell through the cracks. I came across this warning when building with Google's stock GCC 4.9 toolchain on the OnePlus 6. Context was adjusted around lack of commit 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly") in 4.9. Please apply when you get a chance. Thanks! Nathan drivers/md/dm-bufio.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 3ec647e8b9c6..35fd57fdeba9 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -373,9 +373,6 @@ static void __cache_size_refresh(void) static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask, enum data_mode *data_mode) { - unsigned noio_flag; - void *ptr; - if (c->block_size <= DM_BUFIO_BLOCK_SIZE_SLAB_LIMIT) { *data_mode = DATA_MODE_SLAB; return kmem_cache_alloc(DM_BUFIO_CACHE(c), gfp_mask); @@ -399,16 +396,16 @@ static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask, * all allocations done by this process (including pagetables) are done * as if GFP_NOIO was specified. */ + if (gfp_mask & __GFP_NORETRY) { + unsigned noio_flag = memalloc_noio_save(); + void *ptr = __vmalloc(c->block_size, gfp_mask | __GFP_HIGHMEM, + PAGE_KERNEL); - if (gfp_mask & __GFP_NORETRY) - noio_flag = memalloc_noio_save(); - - ptr = __vmalloc(c->block_size, gfp_mask | __GFP_HIGHMEM, PAGE_KERNEL); - - if (gfp_mask & __GFP_NORETRY) memalloc_noio_restore(noio_flag); + return ptr; + } - return ptr; + return __vmalloc(c->block_size, gfp_mask | __GFP_HIGHMEM, PAGE_KERNEL); } /* -- 2.17.1

6 years, 8 months

2
2
0 0

[PATCH] complete e390f9a port for v4.9.106

by Philip Müller

objtool ports introduced in v4.9.106 were not totally complete. Therefore they resulted in issues like: module: overflow in relocation type 10 val XXXXXXXXXXX ‘usbcore’ likely not compiled with -mcmodel=kernel module: overflow in relocation type 10 val XXXXXXXXXXX ‘scsi_mod’ likely not compiled with -mcmodel=kernel Missing part was the complete backport of commit e390f9a. Original notes by Josh Poimboeuf: The '__unreachable' and '__func_stack_frame_non_standard' sections are only used at compile time. They're discarded for vmlinux but they should also be discarded for modules. Since this is a recurring pattern, prefix the section names with ".discard.". It's a nice convention and vmlinux.lds.h already discards such sections. Also remove the 'a' (allocatable) flag from the __unreachable section since it doesn't make sense for a discarded section. Signed-off-by: Philip Müller <philm(a)manjaro.org> Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends") Link: https://gitlab.manjaro.org/packages/core/linux49/issues/2

6 years, 8 months

2
3
0 0

[PATCH v3 1/2] drm/rockchip: vop: split out core clock enablement into separate functions

by Heiko Stuebner

Judging from the iommu code, both the hclk and aclk are necessary for register access. Split them off into separate functions from the regular vop enablement, so that we can use them elsewhere as well. Fixes: d0b912bd4c23 ("iommu/rockchip: Request irqs in rk_iommu_probe()") Cc: stable(a)vger.kernel.org Signed-off-by: Heiko Stuebner <heiko(a)sntech.de> Tested-by: Ezequiel Garcia <ezequiel(a)collabora.com> --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 44 +++++++++++++++------ 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 2121345a61af..9a1f272e41c7 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -486,6 +486,31 @@ static void vop_line_flag_irq_disable(struct vop *vop) spin_unlock_irqrestore(&vop->irq_lock, flags); } +static int vop_core_clks_enable(struct vop *vop) +{ + int ret; + + ret = clk_enable(vop->hclk); + if (ret < 0) + return ret; + + ret = clk_enable(vop->aclk); + if (ret < 0) + goto err_disable_hclk; + + return 0; + +err_disable_hclk: + clk_disable(vop->hclk); + return ret; +} + +static void vop_core_clks_disable(struct vop *vop) +{ + clk_disable(vop->aclk); + clk_disable(vop->hclk); +} + static int vop_enable(struct drm_crtc *crtc) { struct vop *vop = to_vop(crtc); @@ -497,17 +522,13 @@ static int vop_enable(struct drm_crtc *crtc) return ret; } - ret = clk_enable(vop->hclk); + ret = vop_core_clks_enable(vop); if (WARN_ON(ret < 0)) goto err_put_pm_runtime; ret = clk_enable(vop->dclk); if (WARN_ON(ret < 0)) - goto err_disable_hclk; - - ret = clk_enable(vop->aclk); - if (WARN_ON(ret < 0)) - goto err_disable_dclk; + goto err_disable_core; /* * Slave iommu shares power, irq and clock with vop. It was associated @@ -519,7 +540,7 @@ static int vop_enable(struct drm_crtc *crtc) if (ret) { DRM_DEV_ERROR(vop->dev, "failed to attach dma mapping, %d\n", ret); - goto err_disable_aclk; + goto err_disable_dclk; } spin_lock(&vop->reg_lock); @@ -558,12 +579,10 @@ static int vop_enable(struct drm_crtc *crtc) return 0; -err_disable_aclk: - clk_disable(vop->aclk); err_disable_dclk: clk_disable(vop->dclk); -err_disable_hclk: - clk_disable(vop->hclk); +err_disable_core: + vop_core_clks_disable(vop); err_put_pm_runtime: pm_runtime_put_sync(vop->dev); return ret; @@ -609,8 +628,7 @@ static void vop_crtc_atomic_disable(struct drm_crtc *crtc, rockchip_drm_dma_detach_device(vop->drm_dev, vop->dev); clk_disable(vop->dclk); - clk_disable(vop->aclk); - clk_disable(vop->hclk); + vop_core_clks_disable(vop); pm_runtime_put(vop->dev); mutex_unlock(&vop->vop_lock); -- 2.17.0

6 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2018