July 2018 - Linux-stable-mirror

[PATCH] cpufreq: armada-37xx: Fix clock leak

by Gregory CLEMENT

There was no clk_put() balancing the clk_get(). This commit fixes it. Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx") Cc: <stable(a)vger.kernel.org> Reported-by: Thomas Petazzoni <thomas.petazzoni(a)bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> --- drivers/cpufreq/armada-37xx-cpufreq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c index c6ebc88a7d8d..72a2975499db 100644 --- a/drivers/cpufreq/armada-37xx-cpufreq.c +++ b/drivers/cpufreq/armada-37xx-cpufreq.c @@ -202,6 +202,7 @@ static int __init armada37xx_cpufreq_driver_init(void) cur_frequency = clk_get_rate(clk); if (!cur_frequency) { dev_err(cpu_dev, "Failed to get clock rate for CPU\n"); + clk_put(clk); return -EINVAL; } @@ -210,6 +211,7 @@ static int __init armada37xx_cpufreq_driver_init(void) return -EINVAL; armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider); + clk_put(clk); for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR; load_lvl++) { -- 2.16.3

6 years, 7 months

3
2
0 0

FAILED: patch "[PATCH] net/mlx5e: Avoid dealing with vport representors if not being" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 733d3e5497070d05971352ca5087bac83c197c3d Mon Sep 17 00:00:00 2001 From: Or Gerlitz <ogerlitz(a)mellanox.com> Date: Thu, 31 May 2018 11:32:56 +0300 Subject: [PATCH] net/mlx5e: Avoid dealing with vport representors if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the switchdev mode representors are running on the embedded cpu (EC) and not at the host. As such, we should avoid dealing with vport representors if not being esw manager. While here, make sure to disallow eswitch switchdev related setups through devlink if we are not esw managers. Fixes: cb67b832921c ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by: Or Gerlitz <ogerlitz(a)mellanox.com> Reviewed-by: Eli Cohen <eli(a)mellanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 56c1b6f5593e..dae4156a710d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2846,7 +2846,7 @@ void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) mlx5e_activate_channels(&priv->channels); netif_tx_start_all_queues(priv->netdev); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_add_sqs_fwd_rules(priv); mlx5e_wait_channels_min_rx_wqes(&priv->channels); @@ -2857,7 +2857,7 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv) { mlx5e_redirect_rqts_to_drop(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_remove_sqs_fwd_rules(priv); /* FIXME: This is a W/A only for tx timeout watch dog false alarm when @@ -4597,7 +4597,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev) mlx5e_set_netdev_dev_addr(netdev); #if IS_ENABLED(CONFIG_MLX5_ESWITCH) - if (MLX5_VPORT_MANAGER(mdev)) + if (MLX5_ESWITCH_MANAGER(mdev)) netdev->switchdev_ops = &mlx5e_switchdev_ops; #endif @@ -4753,7 +4753,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) mlx5e_enable_async_events(priv); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_register_vport_reps(priv); if (netdev->reg_state != NETREG_REGISTERED) @@ -4788,7 +4788,7 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv) queue_work(priv->wq, &priv->set_rx_mode_work); - if (MLX5_VPORT_MANAGER(priv->mdev)) + if (MLX5_ESWITCH_MANAGER(priv->mdev)) mlx5e_unregister_vport_reps(priv); mlx5e_disable_async_events(priv); @@ -4972,7 +4972,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev) return NULL; #ifdef CONFIG_MLX5_ESWITCH - if (MLX5_VPORT_MANAGER(mdev)) { + if (MLX5_ESWITCH_MANAGER(mdev)) { rpriv = mlx5e_alloc_nic_rep_priv(mdev); if (!rpriv) { mlx5_core_warn(mdev, "Failed to alloc NIC rep priv data\n"); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 60236f73373c..2b8040a3cdbd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -823,7 +823,7 @@ bool mlx5e_is_uplink_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, vport_group_manager)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index cecd201f0b73..91f1209886ff 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -1079,8 +1079,8 @@ static int mlx5_devlink_eswitch_check(struct devlink *devlink) if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH) return -EOPNOTSUPP; - if (!MLX5_CAP_GEN(dev, vport_group_manager)) - return -EOPNOTSUPP; + if(!MLX5_ESWITCH_MANAGER(dev)) + return -EPERM; if (dev->priv.eswitch->mode == SRIOV_NONE) return -EOPNOTSUPP;

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] net/mlx5: E-Switch, Avoid setup attempt if not being e-switch" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 0efc8562491b7d36f6bbc4fbc8f3348cb6641e9c Mon Sep 17 00:00:00 2001 From: Or Gerlitz <ogerlitz(a)mellanox.com> Date: Thu, 31 May 2018 11:16:18 +0300 Subject: [PATCH] net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager In smartnic env, the host (PF) driver might not be an e-switch manager, hence the FW will err on driver attempts to deal with setting/unsetting the eswitch and as a result the overall setup of sriov will fail. Fix that by avoiding the operation if e-switch management is not allowed for this driver instance. While here, move to use the correct name for the esw manager capability name. Fixes: 81848731ff40 ('net/mlx5: E-Switch, Add SR-IOV (FDB) support') Signed-off-by: Or Gerlitz <ogerlitz(a)mellanox.com> Reported-by: Guy Kushnir <guyk(a)mellanox.com> Reviewed-by: Eli Cohen <eli(a)melloanox.com> Tested-by: Eli Cohen <eli(a)melloanox.com> Signed-off-by: Saeed Mahameed <saeedm(a)mellanox.com> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 378ad74518ec..60236f73373c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -839,7 +839,7 @@ static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv) struct mlx5e_rep_priv *rpriv = priv->ppriv; struct mlx5_eswitch_rep *rep; - if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table)) + if (!MLX5_ESWITCH_MANAGER(priv->mdev)) return false; rep = rpriv->rep; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index f63dfbcd29fe..103fd6a0cc65 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1604,7 +1604,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) if (!ESW_ALLOWED(esw)) return 0; - if (!MLX5_CAP_GEN(esw->dev, eswitch_flow_table) || + if (!MLX5_ESWITCH_MANAGER(esw->dev) || !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n"); return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 49a75d31185e..f1a86cea86a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -32,6 +32,7 @@ #include <linux/mutex.h> #include <linux/mlx5/driver.h> +#include <linux/mlx5/eswitch.h> #include "mlx5_core.h" #include "fs_core.h" @@ -2652,7 +2653,7 @@ int mlx5_init_fs(struct mlx5_core_dev *dev) goto err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) { err = init_fdb_root_ns(steering); if (err) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c index afd9f4fa22f4..41ad24f0de2c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c @@ -32,6 +32,7 @@ #include <linux/mlx5/driver.h> #include <linux/mlx5/cmd.h> +#include <linux/mlx5/eswitch.h> #include <linux/module.h> #include "mlx5_core.h" #include "../../mlxfw/mlxfw.h" @@ -159,13 +160,13 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev) } if (MLX5_CAP_GEN(dev, vport_group_manager) && - MLX5_CAP_GEN(dev, eswitch_flow_table)) { + MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH_FLOW_TABLE); if (err) return err; } - if (MLX5_CAP_GEN(dev, eswitch_flow_table)) { + if (MLX5_ESWITCH_MANAGER(dev)) { err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH); if (err) return err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c index 2a8b529ce6dd..a0674962f02c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c @@ -88,6 +88,9 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return -EBUSY; } + if (!MLX5_ESWITCH_MANAGER(dev)) + goto enable_vfs_hca; + err = mlx5_eswitch_enable_sriov(dev->priv.eswitch, num_vfs, SRIOV_LEGACY); if (err) { mlx5_core_warn(dev, @@ -95,6 +98,7 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs) return err; } +enable_vfs_hca: for (vf = 0; vf < num_vfs; vf++) { err = mlx5_core_enable_hca(dev, vf + 1); if (err) { @@ -140,7 +144,8 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev) } out: - mlx5_eswitch_disable_sriov(dev->priv.eswitch); + if (MLX5_ESWITCH_MANAGER(dev)) + mlx5_eswitch_disable_sriov(dev->priv.eswitch); if (mlx5_wait_for_vf_pages(dev)) mlx5_core_warn(dev, "timeout reclaiming VFs pages\n"); diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index d3c9db492b30..fab5121ffb8f 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -8,6 +8,8 @@ #include <linux/mlx5/driver.h> +#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager) + enum { SRIOV_NONE, SRIOV_LEGACY, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76..ac281f5ec9b8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 vnic_env_queue_counters[0x1]; u8 ets[0x1]; u8 nic_flow_table[0x1]; - u8 eswitch_flow_table[0x1]; + u8 eswitch_manager[0x1]; u8 device_memory[0x1]; u8 mcam_reg[0x1]; u8 pcam_reg[0x1];

6 years, 7 months

1
0
0 0

[PATCHES] Networking

by David Miller

==================== READ ME. I have this stale email in my outgoing draft folder, and I have no idea if I actually sent this out successfully or not. Please double check, thanks! ==================== Please queue up the following networking bug fixes for v4.14 and v4.17 -stable, repectively. Thank you!

6 years, 7 months

2
1
0 0

[PATCH v2] powerpc/powernv : Save/Restore SPRG3 on entry/exit from stop.

by Gautham R. Shenoy

From: "Gautham R. Shenoy" <ego(a)linux.vnet.ibm.com> On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror SPRN_USPRG3 are used as userspace VDSO write and read registers respectively. SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not restored. As a result, any read from SPRN_USPRG3 returns zero on an exit from stop4 and above. Thus in this situation, on POWER9, any call from sched_getcpu() always returns zero, as on powerpc, we call __kernel_getcpu() which relies upon SPRN_USPRG3 to report the CPU and NUMA node information. Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state with the sprg_vdso value that is cached in PACA. Fixes: e1c1cfed5432 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle") Reported-by: Florian Weimer <fweimer(a)redhat.com> Cc: <stable(a)vger.kernel.org> # 4.14 Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: Michael Neuling <mikey(a)neuling.org> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Vaidyanathan Srinivasan <svaidy(a)linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego(a)linux.vnet.ibm.com> --- Change from v1: Restoring the SPRG3 from paca->sprg_vdso instead of saving it separately during stop-entry, as suggested by Mikey. arch/powerpc/kernel/idle_book3s.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index d85d551..672ead8 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -144,7 +144,9 @@ power9_restore_additional_sprs: mtspr SPRN_MMCR1, r4 ld r3, STOP_MMCR2(r13) + ld r4, PACA_SPRG_VDSO(r13) mtspr SPRN_MMCR2, r3 + mtspr SPRN_SPRG3, r4 blr /* -- 1.8.3.1

6 years, 7 months

2
1
0 0

[PATCH] mtd: rawnand: fsmc: Stop using chip->read_buf()

by Boris Brezillon

chip->read_buf is left unassigned since commit 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()"), leading to a NULL pointer dereference when it's called from fsmc_read_page_hwecc(). Fix that by using the appropriate helper to read data out of the NAND. Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()") Cc: <stable(a)vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> --- drivers/mtd/nand/raw/fsmc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index f4a5a317d4ae..e1086a010b88 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -740,7 +740,7 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) { nand_read_page_op(chip, page, s * eccsize, NULL, 0); chip->ecc.hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); + nand_read_data_op(chip, p, eccsize, false); for (j = 0; j < eccbytes;) { struct mtd_oob_region oobregion; -- 2.14.1

6 years, 7 months

2
1
0 0

[PATCH 2/2] drm/probe_helper: Add drm_helper_probe_single_connector_modes_with_rpm()

by Lyude Paul

For nouveau, while the GPU is guaranteed to be on when a hotplug has been received, the same assertion does not hold true if a connector probe has been started by userspace without having had received a sysfs event. So ensure that any connector probing keeps the GPU alive for the duration of the probe by introducing drm_helper_probe_single_connector_modes_with_rpm(). It's the same as drm_helper_probe_single_connector_modes, but it handles holding a power reference to the device for the duration of the connector probe. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Reviewed-by: Karol Herbst <karolherbst(a)gmail.com> Cc: Lukas Wunner <lukas(a)wunner.de> Cc: stable(a)vger.kernel.org --- Changes since v1: - Add a generic helper to DRM to handle this drivers/gpu/drm/drm_probe_helper.c | 31 +++++++++++++++++++++ drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- drivers/gpu/drm/nouveau/nouveau_connector.c | 4 +-- include/drm/drm_crtc_helper.h | 7 +++-- 4 files changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 527743394150..0a9d6748b854 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -31,6 +31,7 @@ #include <linux/export.h> #include <linux/moduleparam.h> +#include <linux/pm_runtime.h> #include <drm/drmP.h> #include <drm/drm_crtc.h> @@ -541,6 +542,36 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, } EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); +/** + * drm_helper_probe_single_connector_modes_with_rpm - get complete set of + * display modes + * @connector: connector to probe + * @maxX: max width for modes + * @maxY: max height for modes + * + * Same as drm_helper_probe_single_connector_modes, except that it makes sure + * that the device is active by synchronously grabbing a runtime power + * reference while probing. + * + * Returns: + * The number of modes found on @connector. + */ +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY) +{ + int ret; + + ret = pm_runtime_get_sync(connector->dev->dev); + if (ret < 0 && ret != -EACCES) + return ret; + + ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY); + + pm_runtime_put(connector->dev->dev); + return ret; +} +EXPORT_SYMBOL(drm_helper_probe_single_connector_modes_with_rpm); + /** * drm_kms_helper_hotplug_event - fire off KMS hotplug events * @dev: drm_device whose connector state changed diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index fa3ab618a0f9..c54767b50fd8 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -858,7 +858,7 @@ static const struct drm_connector_funcs nv50_mstc = { .reset = nouveau_conn_reset, .detect = nv50_mstc_detect, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .destroy = nv50_mstc_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, .atomic_destroy_state = nouveau_conn_atomic_destroy_state, diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 2a45b4c2ceb0..8d9070779261 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1088,7 +1088,7 @@ nouveau_connector_funcs = { .reset = nouveau_conn_reset, .detect = nouveau_connector_detect, .force = nouveau_connector_force, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .set_property = nouveau_connector_set_property, .destroy = nouveau_connector_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, @@ -1103,7 +1103,7 @@ nouveau_connector_funcs_lvds = { .reset = nouveau_conn_reset, .detect = nouveau_connector_detect_lvds, .force = nouveau_connector_force, - .fill_modes = drm_helper_probe_single_connector_modes, + .fill_modes = drm_helper_probe_single_connector_modes_with_rpm, .set_property = nouveau_connector_set_property, .destroy = nouveau_connector_destroy, .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 6914633037a5..8f3f6d6fcc8c 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -64,9 +64,10 @@ int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb); /* drm_probe_helper.c */ -int drm_helper_probe_single_connector_modes(struct drm_connector - *connector, uint32_t maxX, - uint32_t maxY); +int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); +int drm_helper_probe_single_connector_modes_with_rpm(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); int drm_helper_probe_detect(struct drm_connector *connector, struct drm_modeset_acquire_ctx *ctx, bool force); -- 2.17.1

6 years, 7 months

1
0
0 0

[PATCH 1/2] drm/fb_helper: Add drm_fb_helper_output_poll_changed_with_rpm()

by Lyude Paul

When DP MST hubs get confused, they can occasionally stop responding for a good bit of time up until the point where the DRM driver manages to do the right DPCD accesses to get it to start responding again. In a worst case scenario however, this process can take upwards of 10+ seconds. Currently we use the default output_poll_changed handler drm_fb_helper_output_poll_changed() to handle output polling, which doesn't happen to grab any power references on the device when polling. If we're unlucky enough to have a hub (such as Lenovo's infamous laptop docks for the P5x/P7x series) that's easily startled and confused, this can lead to a pretty nasty deadlock situation that looks like this: - Hotplug event from hub happens, we enter drm_fb_helper_output_poll_changed() and start communicating with the hub - While we're in drm_fb_helper_output_poll_changed() and attempting to communicate with the hub, we end up confusing it and cause it to stop responding for at least 10 seconds - After 5 seconds of being in drm_fb_helper_output_poll_changed(), the pm core attempts to put the GPU into autosuspend, which ends up calling drm_kms_helper_poll_disable() - While the runtime PM core is waiting in drm_kms_helper_poll_disable() for the output poll to finish, we end up finally detecting an MST display - We notice the new display and tries to enable it, which triggers an atomic commit which triggers a call to pm_runtime_get_sync() - the output poll thread deadlocks the pm core waiting for the pm core to finish the autosuspend request while the pm core waits for the output poll thread to finish Sample: [ 246.669625] INFO: task kworker/4:0:37 blocked for more than 120 seconds. [ 246.673398] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.675271] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.676527] kworker/4:0 D 0 37 2 0x80000000 [ 246.677580] Workqueue: events output_poll_execute [drm_kms_helper] [ 246.678704] Call Trace: [ 246.679753] __schedule+0x322/0xaf0 [ 246.680916] schedule+0x33/0x90 [ 246.681924] schedule_preempt_disabled+0x15/0x20 [ 246.683023] __mutex_lock+0x569/0x9a0 [ 246.684035] ? kobject_uevent_env+0x117/0x7b0 [ 246.685132] ? drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.686179] mutex_lock_nested+0x1b/0x20 [ 246.687278] ? mutex_lock_nested+0x1b/0x20 [ 246.688307] drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.689420] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper] [ 246.690462] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper] [ 246.691570] output_poll_execute+0x198/0x1c0 [drm_kms_helper] [ 246.692611] process_one_work+0x231/0x620 [ 246.693725] worker_thread+0x214/0x3a0 [ 246.694756] kthread+0x12b/0x150 [ 246.695856] ? wq_pool_ids_show+0x140/0x140 [ 246.696888] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.697998] ret_from_fork+0x3a/0x50 [ 246.699034] INFO: task kworker/0:1:60 blocked for more than 120 seconds. [ 246.700153] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.701182] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.702278] kworker/0:1 D 0 60 2 0x80000000 [ 246.703293] Workqueue: pm pm_runtime_work [ 246.704393] Call Trace: [ 246.705403] __schedule+0x322/0xaf0 [ 246.706439] ? wait_for_completion+0x104/0x190 [ 246.707393] schedule+0x33/0x90 [ 246.708375] schedule_timeout+0x3a5/0x590 [ 246.709289] ? mark_held_locks+0x58/0x80 [ 246.710208] ? _raw_spin_unlock_irq+0x2c/0x40 [ 246.711222] ? wait_for_completion+0x104/0x190 [ 246.712134] ? trace_hardirqs_on_caller+0xf4/0x190 [ 246.713094] ? wait_for_completion+0x104/0x190 [ 246.713964] wait_for_completion+0x12c/0x190 [ 246.714895] ? wake_up_q+0x80/0x80 [ 246.715727] ? get_work_pool+0x90/0x90 [ 246.716649] flush_work+0x1c9/0x280 [ 246.717483] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 246.718442] __cancel_work_timer+0x146/0x1d0 [ 246.719247] cancel_delayed_work_sync+0x13/0x20 [ 246.720043] drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] [ 246.721123] nouveau_pmops_runtime_suspend+0x3d/0xb0 [nouveau] [ 246.721897] pci_pm_runtime_suspend+0x6b/0x190 [ 246.722825] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.723737] __rpm_callback+0x7a/0x1d0 [ 246.724721] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.725607] rpm_callback+0x24/0x80 [ 246.726553] ? pci_has_legacy_pm_support+0x70/0x70 [ 246.727376] rpm_suspend+0x142/0x6b0 [ 246.728185] pm_runtime_work+0x97/0xc0 [ 246.728938] process_one_work+0x231/0x620 [ 246.729796] worker_thread+0x44/0x3a0 [ 246.730614] kthread+0x12b/0x150 [ 246.731395] ? wq_pool_ids_show+0x140/0x140 [ 246.732202] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.732878] ret_from_fork+0x3a/0x50 [ 246.733768] INFO: task kworker/4:2:422 blocked for more than 120 seconds. [ 246.734587] Not tainted 4.18.0-rc5Lyude-Test+ #2 [ 246.735393] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.736113] kworker/4:2 D 0 422 2 0x80000080 [ 246.736789] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 246.737665] Call Trace: [ 246.738490] __schedule+0x322/0xaf0 [ 246.739250] schedule+0x33/0x90 [ 246.739908] rpm_resume+0x19c/0x850 [ 246.740750] ? finish_wait+0x90/0x90 [ 246.741541] __pm_runtime_resume+0x4e/0x90 [ 246.742370] nv50_disp_atomic_commit+0x31/0x210 [nouveau] [ 246.743124] drm_atomic_commit+0x4a/0x50 [drm] [ 246.743775] restore_fbdev_mode_atomic+0x1c8/0x240 [drm_kms_helper] [ 246.744603] restore_fbdev_mode+0x31/0x140 [drm_kms_helper] [ 246.745373] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 246.746220] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [ 246.746884] drm_fb_helper_hotplug_event.part.28+0x96/0xb0 [drm_kms_helper] [ 246.747675] drm_fb_helper_output_poll_changed+0x23/0x30 [drm_kms_helper] [ 246.748544] drm_kms_helper_hotplug_event+0x2a/0x30 [drm_kms_helper] [ 246.749439] nv50_mstm_hotplug+0x15/0x20 [nouveau] [ 246.750111] drm_dp_send_link_address+0x177/0x1c0 [drm_kms_helper] [ 246.750764] drm_dp_check_and_send_link_address+0xa8/0xd0 [drm_kms_helper] [ 246.751602] drm_dp_mst_link_probe_work+0x51/0x90 [drm_kms_helper] [ 246.752314] process_one_work+0x231/0x620 [ 246.752979] worker_thread+0x44/0x3a0 [ 246.753838] kthread+0x12b/0x150 [ 246.754619] ? wq_pool_ids_show+0x140/0x140 [ 246.755386] ? kthread_create_worker_on_cpu+0x70/0x70 [ 246.756162] ret_from_fork+0x3a/0x50 [ 246.756847] Showing all locks held in the system: [ 246.758261] 3 locks held by kworker/4:0/37: [ 246.759016] #0: 00000000f8df4d2d ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.759856] #1: 00000000e6065461 ((work_completion)(&(&dev->mode_config.output_poll_work)->work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.760670] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_hotplug_event.part.28+0x20/0xb0 [drm_kms_helper] [ 246.761516] 2 locks held by kworker/0:1/60: [ 246.762274] #0: 00000000fff6be0f ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.762982] #1: 000000005ab44fb4 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.763890] 1 lock held by khungtaskd/64: [ 246.764664] #0: 000000008cb8b5c3 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 246.765588] 5 locks held by kworker/4:2/422: [ 246.766440] #0: 00000000232f0959 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.767390] #1: 00000000bb59b134 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 246.768154] #2: 00000000cb66735f (&helper->lock){+.+.}, at: drm_fb_helper_restore_fbdev_mode_unlocked+0x4c/0xb0 [drm_kms_helper] [ 246.768966] #3: 000000004c8f0b6b (crtc_ww_class_acquire){+.+.}, at: restore_fbdev_mode_atomic+0x4b/0x240 [drm_kms_helper] [ 246.769921] #4: 000000004c34a296 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8a/0x1b0 [drm] [ 246.770839] 1 lock held by dmesg/1038: [ 246.771739] 2 locks held by zsh/1172: [ 246.772650] #0: 00000000836d0438 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 246.773680] #1: 000000001f4f4d48 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 246.775522] ============================================= So, to fix this (and any other possible deadlock issues like this that could occur in the output_poll_changed patch) we make sure that nouveau's output_poll_changed functions grab a runtime power ref before sending any hotplug events, and hold it until we're finished. We introduce this through adding a generic DRM helper which other drivers may reuse. This fixes deadlock issues when in fbcon with nouveau on my P50, and should fix it for everyone else's as well! Signed-off-by: Lyude Paul <lyude(a)redhat.com> Reviewed-by: Karol Herbst <karolherbst(a)gmail.com> Cc: Lukas Wunner <lukas(a)wunner.de> Cc: stable(a)vger.kernel.org --- Changes since v1: - Add a generic helper for DRM to handle this drivers/gpu/drm/drm_fb_helper.c | 23 +++++++++++++++++++++++ drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- include/drm/drm_fb_helper.h | 5 +++++ 3 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 2ee1eaa66188..1ab2f3646526 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -34,6 +34,7 @@ #include <linux/sysrq.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/pm_runtime.h> #include <drm/drmP.h> #include <drm/drm_crtc.h> #include <drm/drm_fb_helper.h> @@ -2928,6 +2929,28 @@ void drm_fb_helper_output_poll_changed(struct drm_device *dev) } EXPORT_SYMBOL(drm_fb_helper_output_poll_changed); +/** + * drm_fb_helper_output_poll_changed_with_rpm - DRM mode + * config \.output_poll_changed + * helper for fbdev emulation + * @dev: DRM device + * + * Same as drm_fb_helper_output_poll_changed, except that it makes sure that + * the device is active by synchronously grabbing a runtime power reference + * while probing. + */ +void drm_fb_helper_output_poll_changed_with_rpm(struct drm_device *dev) +{ + int ret; + + ret = pm_runtime_get_sync(dev->dev); + if (WARN_ON(ret < 0 && ret != -EACCES)) + return; + drm_fb_helper_hotplug_event(dev->fb_helper); + pm_runtime_put(dev->dev); +} +EXPORT_SYMBOL(drm_fb_helper_output_poll_changed_with_rpm); + /* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT) * but the module doesn't depend on any fb console symbols. At least * attempt to load fbcon to avoid leaving the system without a usable console. diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index eb3e41a78806..fa3ab618a0f9 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2015,7 +2015,7 @@ nv50_disp_atomic_state_alloc(struct drm_device *dev) static const struct drm_mode_config_funcs nv50_disp_func = { .fb_create = nouveau_user_framebuffer_create, - .output_poll_changed = drm_fb_helper_output_poll_changed, + .output_poll_changed = drm_fb_helper_output_poll_changed_with_rpm, .atomic_check = nv50_disp_atomic_check, .atomic_commit = nv50_disp_atomic_commit, .atomic_state_alloc = nv50_disp_atomic_state_alloc, diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index b069433e7fc1..ca809bfbaebb 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -330,6 +330,7 @@ void drm_fb_helper_fbdev_teardown(struct drm_device *dev); void drm_fb_helper_lastclose(struct drm_device *dev); void drm_fb_helper_output_poll_changed(struct drm_device *dev); +void drm_fb_helper_output_poll_changed_with_rpm(struct drm_device *dev); #else static inline void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper, @@ -564,6 +565,10 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev) { } +static inline void drm_fb_helper_output_poll_changed_with_rpm(struct drm_device *dev) +{ +} + #endif static inline int -- 2.17.1

6 years, 7 months

1
0
0 0

Dear Beneficiary....28

by Mr. Jimy

Dear Beneficiary) stable(a)vger.kernel.org,, Good day! I have important information for you here. Please accept my sincere apologizes if my email disturbs your business or personal ethics and let me first introduce myself to you before telling you my reason for contacting you My name is Mr. Jim Boke Lawson from Sierra Leon and a staff in the Card Accounts Management Section of a very well-known bank, here at London United Kingdom. One of our bank accounts here has a current deposit balance of (Nine Million Three Hundred and Forty Six Thousand, One Hundred and Fifty two Great British Pounds Sterling and Point Seven Pence Only) and the Card account has been classified AS DORMANT (Lack of activities on the account (deposited or withdrawal) for last operated (11yrs) now. >From my private investigations and confirmation, the owner of this said bank account, a Foreigner by name, Mr. Jonce Ludwig died on the 4th of January 2007 in a boat accident that occurred here at Birmingham, UK Since then, nobody has done anything as regards claiming this money as no traces of family member or next of kin with any knowledge as to the existence of this bank account or the funds here. Further inquiry from our National Immigration Services here also indicated that he (Mr. Jonce Ludwig) was ONLY on a single entry into the UK, and had had intention to establish a Real Estate Firm here at United Kingdom, hence the deposit of this very fund with our bank. I have been in search for a reliable and trusted foreign partner to work with and transfer this money to you that is why I am contacting you to seek your consent to partner with me and get this funds out to you urgently. This is totally free and 100% risk free because I am the bank officer in charge of this particular account and it’s my duty at the bank to sign off the deposit to whoever I present as the administrator. I therefore propose to do this business with you, and I want you to stand in as the Next of Kin to attest to this fund, so that we can have the fund and Bank Account details released to you after due processes have been followed. Also, all the legal documents are readily available and valid to be signed and stamped in your name and it will be done without any problem as the fund is 100% legitimate and does not originate from drug money laundering, or terrorism fund or any other illegal act. As soon as the deal is done successfully, you will take 50% while 50% come to me. Please let me know your interest to work with me by responding to this through my private email address as follows: Thanking you for accepting to do this with us. I remain sincerely, Mr. Jimy Boke Lawson.

6 years, 7 months

1
0
0 0

[PATCH] Input: i8042 - add Lenovo LaVie Z to the i8042 reset list

by Chen-Yu Tsai

The Lenovo LaVie Z laptop requires i8042 to be reset in order to consistently detect its Elantech touchpad. The nomux and kbdreset quirks are not sufficient. It's possible the other LaVie Z models from NEC require this as well. Cc: stable(a)vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index b353d494ad40..136f6e7bf797 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -527,6 +527,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"), }, }, + { + /* Lenovo LaVie Z */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"), + }, + }, { } }; -- 2.18.0

6 years, 7 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2018