July 2018 - Linux-stable-mirror

[char-misc-next] mei: don't update offset in write

by Tomas Winkler

From: Alexander Usyskin <alexander.usyskin(a)intel.com> MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: <stable(a)vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin(a)intel.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> --- drivers/misc/mei/main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index f690918f7817..302ba7a63bd2 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -312,7 +312,6 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, } } - *offset = 0; cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, file); if (!cb) { rets = -ENOMEM; -- 2.14.4

6 years, 7 months

1
0
0 0

[PATCH 1/4] rtc: omap: fix potential crash on power off

by Johan Hovold

Do not set the system power-off callback and omap power-off rtc pointer until we're done setting up our device to avoid leaving stale pointers around after a late probe error. Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration") Cc: stable <stable(a)vger.kernel.org> # 4.9 Cc: Marcin Niestroj <m.niestroj(a)grinn-global.com> Cc: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/rtc/rtc-omap.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 39086398833e..c214b69a8787 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -861,13 +861,6 @@ static int omap_rtc_probe(struct platform_device *pdev) goto err; } - if (rtc->is_pmic_controller) { - if (!pm_power_off) { - omap_rtc_power_off_rtc = rtc; - pm_power_off = omap_rtc_power_off; - } - } - /* Support ext_wakeup pinconf */ rtc_pinctrl_desc.name = dev_name(&pdev->dev); @@ -884,6 +877,13 @@ static int omap_rtc_probe(struct platform_device *pdev) rtc_nvmem_register(rtc->rtc, &omap_rtc_nvmem_config); + if (rtc->is_pmic_controller) { + if (!pm_power_off) { + omap_rtc_power_off_rtc = rtc; + pm_power_off = omap_rtc_power_off; + } + } + return 0; err: -- 2.18.0

6 years, 7 months

3
2
0 0

[PATCH v2 4.9.y] x86/fpu: Remove use_eager_fpu()

by Daniel Sangorrin

From: Andy Lutomirski <luto(a)kernel.org> commit c592b57347069abfc0dcad3b3a302cf882602597 upstream This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all. Signed-off-by: Andy Lutomirski <luto(a)kernel.org> Signed-off-by: Rik van Riel <riel(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Brian Gerst <brgerst(a)gmail.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Denys Vlasenko <dvlasenk(a)redhat.com> Cc: Fenghua Yu <fenghua.yu(a)intel.com> Cc: H. Peter Anvin <hpa(a)zytor.com> Cc: Josh Poimboeuf <jpoimboe(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas(a)oracle.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: pbonzini(a)redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Daniel Sangorrin <daniel.sangorrin(a)toshiba.co.jp> --- I backported this patch to remove the final fpu lazy mode deadcode from stable 4.9.y. I only had to solve a small conflict caused by the fact that commit b22cbe404a9c ("x86/fpu: Fix invalid FPU ptrace state after execve()") had been applied before in stable (it was supposed to come after) After applying this patch please do the following to remove more deadcode: - cherry-pick: 3913cc350757 ("x86/fpu: Remove struct fpu::counter") - revert: f09a7b0eead7 ("perf: sync up x86/.../cpufeatures.h") - cherry-pick: e63650840e8b ("x86/fpu: Finish excising 'eagerfpu'") arch/x86/crypto/crc32c-intel_glue.c | 17 ++++------------- arch/x86/include/asm/fpu/internal.h | 34 +--------------------------------- arch/x86/kernel/fpu/core.c | 36 ++++-------------------------------- arch/x86/kernel/fpu/signal.c | 8 +++----- arch/x86/kernel/fpu/xstate.c | 9 --------- arch/x86/kvm/cpuid.c | 4 +--- arch/x86/kvm/x86.c | 10 ---------- 7 files changed, 13 insertions(+), 105 deletions(-) diff --git a/arch/x86/crypto/crc32c-intel_glue.c b/arch/x86/crypto/crc32c-intel_glue.c index dd19584..5773e11 100644 --- a/arch/x86/crypto/crc32c-intel_glue.c +++ b/arch/x86/crypto/crc32c-intel_glue.c @@ -48,21 +48,13 @@ #ifdef CONFIG_X86_64 /* * use carryless multiply version of crc32c when buffer - * size is >= 512 (when eager fpu is enabled) or - * >= 1024 (when eager fpu is disabled) to account + * size is >= 512 to account * for fpu state save/restore overhead. */ -#define CRC32C_PCL_BREAKEVEN_EAGERFPU 512 -#define CRC32C_PCL_BREAKEVEN_NOEAGERFPU 1024 +#define CRC32C_PCL_BREAKEVEN 512 asmlinkage unsigned int crc_pcl(const u8 *buffer, int len, unsigned int crc_init); -static int crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_EAGERFPU; -#define set_pcl_breakeven_point() \ -do { \ - if (!use_eager_fpu()) \ - crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_NOEAGERFPU; \ -} while (0) #endif /* CONFIG_X86_64 */ static u32 crc32c_intel_le_hw_byte(u32 crc, unsigned char const *data, size_t length) @@ -185,7 +177,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, * use faster PCL version if datasize is large enough to * overcome kernel fpu state save/restore overhead */ - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *crcp = crc_pcl(data, len, *crcp); kernel_fpu_end(); @@ -197,7 +189,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, static int __crc32c_pcl_intel_finup(u32 *crcp, const u8 *data, unsigned int len, u8 *out) { - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *(__le32 *)out = ~cpu_to_le32(crc_pcl(data, len, *crcp)); kernel_fpu_end(); @@ -257,7 +249,6 @@ static int __init crc32c_intel_mod_init(void) alg.update = crc32c_pcl_intel_update; alg.finup = crc32c_pcl_intel_finup; alg.digest = crc32c_pcl_intel_digest; - set_pcl_breakeven_point(); } #endif return crypto_register_shash(&alg); diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h index 8852e3a..7801d32 100644 --- a/arch/x86/include/asm/fpu/internal.h +++ b/arch/x86/include/asm/fpu/internal.h @@ -60,11 +60,6 @@ extern u64 fpu__get_supported_xfeatures_mask(void); /* * FPU related CPU feature flag helper routines: */ -static __always_inline __pure bool use_eager_fpu(void) -{ - return true; -} - static __always_inline __pure bool use_xsaveopt(void) { return static_cpu_has(X86_FEATURE_XSAVEOPT); @@ -501,24 +496,6 @@ static inline int fpu_want_lazy_restore(struct fpu *fpu, unsigned int cpu) } -/* - * Wrap lazy FPU TS handling in a 'hw fpregs activation/deactivation' - * idiom, which is then paired with the sw-flag (fpregs_active) later on: - */ - -static inline void __fpregs_activate_hw(void) -{ - if (!use_eager_fpu()) - clts(); -} - -static inline void __fpregs_deactivate_hw(void) -{ - if (!use_eager_fpu()) - stts(); -} - -/* Must be paired with an 'stts' (fpregs_deactivate_hw()) after! */ static inline void __fpregs_deactivate(struct fpu *fpu) { WARN_ON_FPU(!fpu->fpregs_active); @@ -528,7 +505,6 @@ static inline void __fpregs_deactivate(struct fpu *fpu) trace_x86_fpu_regs_deactivated(fpu); } -/* Must be paired with a 'clts' (fpregs_activate_hw()) before! */ static inline void __fpregs_activate(struct fpu *fpu) { WARN_ON_FPU(fpu->fpregs_active); @@ -554,22 +530,17 @@ static inline int fpregs_active(void) } /* - * Encapsulate the CR0.TS handling together with the - * software flag. - * * These generally need preemption protection to work, * do try to avoid using these on their own. */ static inline void fpregs_activate(struct fpu *fpu) { - __fpregs_activate_hw(); __fpregs_activate(fpu); } static inline void fpregs_deactivate(struct fpu *fpu) { __fpregs_deactivate(fpu); - __fpregs_deactivate_hw(); } /* @@ -596,8 +567,7 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) * or if the past 5 consecutive context-switches used math. */ fpu.preload = static_cpu_has(X86_FEATURE_FPU) && - new_fpu->fpstate_active && - (use_eager_fpu() || new_fpu->counter > 5); + new_fpu->fpstate_active; if (old_fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(old_fpu)) @@ -615,8 +585,6 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) __fpregs_activate(new_fpu); trace_x86_fpu_regs_activated(new_fpu); prefetch(&new_fpu->state); - } else { - __fpregs_deactivate_hw(); } } else { old_fpu->counter = 0; diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index 96d80df..2dc1927 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -58,27 +58,9 @@ static bool kernel_fpu_disabled(void) return this_cpu_read(in_kernel_fpu); } -/* - * Were we in an interrupt that interrupted kernel mode? - * - * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that - * pair does nothing at all: the thread must not have fpu (so - * that we don't try to save the FPU state), and TS must - * be set (so that the clts/stts pair does nothing that is - * visible in the interrupted kernel thread). - * - * Except for the eagerfpu case when we return true; in the likely case - * the thread has FPU but we are not going to set/clear TS. - */ static bool interrupted_kernel_fpu_idle(void) { - if (kernel_fpu_disabled()) - return false; - - if (use_eager_fpu()) - return true; - - return !current->thread.fpu.fpregs_active && (read_cr0() & X86_CR0_TS); + return !kernel_fpu_disabled(); } /* @@ -126,7 +108,6 @@ void __kernel_fpu_begin(void) copy_fpregs_to_fpstate(fpu); } else { this_cpu_write(fpu_fpregs_owner_ctx, NULL); - __fpregs_activate_hw(); } } EXPORT_SYMBOL(__kernel_fpu_begin); @@ -137,8 +118,6 @@ void __kernel_fpu_end(void) if (fpu->fpregs_active) copy_kernel_to_fpregs(&fpu->state); - else - __fpregs_deactivate_hw(); kernel_fpu_enable(); } @@ -200,10 +179,7 @@ void fpu__save(struct fpu *fpu) trace_x86_fpu_before_save(fpu); if (fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(fpu)) { - if (use_eager_fpu()) - copy_kernel_to_fpregs(&fpu->state); - else - fpregs_deactivate(fpu); + copy_kernel_to_fpregs(&fpu->state); } } trace_x86_fpu_after_save(fpu); @@ -261,8 +237,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu) * Don't let 'init optimized' areas of the XSAVE area * leak into the child task: */ - if (use_eager_fpu()) - memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size); + memset(&dst_fpu->state.xsave, 0, fpu_kernel_xstate_size); /* * Save current FPU registers directly into the child @@ -284,10 +259,7 @@ int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu) memcpy(&src_fpu->state, &dst_fpu->state, fpu_kernel_xstate_size); - if (use_eager_fpu()) - copy_kernel_to_fpregs(&src_fpu->state); - else - fpregs_deactivate(src_fpu); + copy_kernel_to_fpregs(&src_fpu->state); } preempt_enable(); diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 3ec0d2d..3a93186 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -344,11 +344,9 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size) } fpu->fpstate_active = 1; - if (use_eager_fpu()) { - preempt_disable(); - fpu__restore(fpu); - preempt_enable(); - } + preempt_disable(); + fpu__restore(fpu); + preempt_enable(); return err; } else { diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index abfbb61b..e9d7f46 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -890,15 +890,6 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, */ if (!boot_cpu_has(X86_FEATURE_OSPKE)) return -EINVAL; - /* - * For most XSAVE components, this would be an arduous task: - * brining fpstate up to date with fpregs, updating fpstate, - * then re-populating fpregs. But, for components that are - * never lazily managed, we can just access the fpregs - * directly. PKRU is never managed lazily, so we can just - * manipulate it directly. Make sure it stays that way. - */ - WARN_ON_ONCE(!use_eager_fpu()); /* Set the bits we need in PKRU: */ if (init_val & PKEY_DISABLE_ACCESS) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 7e5119c..c17d389 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -16,7 +16,6 @@ #include <linux/export.h> #include <linux/vmalloc.h> #include <linux/uaccess.h> -#include <asm/fpu/internal.h> /* For use_eager_fpu. Ugh! */ #include <asm/user.h> #include <asm/fpu/xstate.h> #include "cpuid.h" @@ -114,8 +113,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); - if (use_eager_fpu()) - kvm_x86_ops->fpu_activate(vcpu); + kvm_x86_ops->fpu_activate(vcpu); /* * The existing code assumes virtual address is 48-bit in the canonical diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5ca23af..0754dae 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7513,16 +7513,6 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu); __kernel_fpu_end(); ++vcpu->stat.fpu_reload; - /* - * If using eager FPU mode, or if the guest is a frequent user - * of the FPU, just leave the FPU active for next time. - * Every 255 times fpu_counter rolls over to 0; a guest that uses - * the FPU in bursts will revert to loading it on demand. - */ - if (!use_eager_fpu()) { - if (++vcpu->fpu_counter < 5) - kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); - } trace_kvm_fpu(0); } -- 2.1.4

6 years, 7 months

1
0
0 0

[PATCH] mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()

by Boris Brezillon

Modern NAND controller drivers implement ->exec_op() instead of ->cmdfunc(), make sure we don't end up with a NULL pointer dereference when hynix_nand_reg_write_op() is called. Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Cc: <stable(a)vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon(a)bootlin.com> --- drivers/mtd/nand/raw/nand_hynix.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c index 8cbe77f447c7..4ffbb26e76d6 100644 --- a/drivers/mtd/nand/raw/nand_hynix.c +++ b/drivers/mtd/nand/raw/nand_hynix.c @@ -100,6 +100,16 @@ static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val) struct mtd_info *mtd = nand_to_mtd(chip); u16 column = ((u16)addr << 8) | addr; + if (chip->exec_op) { + struct nand_op_instr instrs[] = { + NAND_OP_ADDR(1, &addr, 0), + NAND_OP_8BIT_DATA_OUT(1, &val, 0), + }; + struct nand_operation op = NAND_OPERATION(instrs); + + return nand_exec_op(chip, &op); + } + chip->cmdfunc(mtd, NAND_CMD_NONE, column, -1); chip->write_byte(mtd, val); -- 2.14.1

6 years, 7 months

2
2
0 0

[PATCH v2] devres: Really align data field to unsigned long long

by Alexey Brodkin

Depending on ABI "long long" type of a particular 32-bit CPU might be aligned by either word (32-bits) or double word (64-bits). Make sure "data" is really 64-bit aligned for any 32-bit CPU. At least for 32-bit ARC cores ABI requires "long long" types to be aligned by normal 32-bit word. This makes "data" field aligned to 12 bytes. Which is still OK as long as we use 32-bit data only. But once we want to use native atomic64_t type (i.e. when we use special instructions LLOCKD/SCONDD for accessing 64-bit data) we easily hit misaligned access exception. That's because even on CPUs capable of non-aligned data access LL/SC instructions require strict alignment. Signed-off-by: Alexey Brodkin <abrodkin(a)synopsys.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org --- Changes v1 -> v2: * Reworded commit message * Inserted comment right in source [Thomas] drivers/base/devres.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/base/devres.c b/drivers/base/devres.c index f98a097e73f2..466fa59c866a 100644 --- a/drivers/base/devres.c +++ b/drivers/base/devres.c @@ -24,8 +24,12 @@ struct devres_node { struct devres { struct devres_node node; - /* -- 3 pointers */ - unsigned long long data[]; /* guarantee ull alignment */ + /* + * Depending on ABI "long long" type of a particular 32-bit CPU + * might be aligned by either word (32-bits) or double word (64-bits). + * Make sure "data" is really 64-bit aligned for any 32-bit CPU. + */ + unsigned long long data[] __aligned(sizeof(unsigned long long)); }; struct devres_group { -- 2.17.1

6 years, 7 months

3
3
0 0

Re: [PATCH 4.16 234/279] x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI

by Vlastimil Babka

On 06/18/2018 10:13 AM, Greg Kroah-Hartman wrote: > 4.16-stable review patch. If anyone has any objections, please let me know. So I was wondering, why backport such a considerable number of *selftests* to stable, given the stable policy? Surely selftests don't affect the kernel itself breaking for users? Thanks, Vlastimil

6 years, 7 months

4
6
0 0

[Linux-stable-mirror] [PATCH] scsi: lpfc: Switch memcpy_fromio() to __read32_copy()

by Huacai Chen

In commit bc73905abf770192 ("[SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup"), lpfc_memcpy_to_slim() have switched memcpy_toio() to __write32_copy() in order to prevent unaligned 64 bit copy. Recently, we found that lpfc_memcpy_from_slim() have similar issues, so let it switch memcpy_fromio() to __read32_copy(). Cc: stable(a)vger.kernel.org Signed-off-by: Huacai Chen <chenhc(a)lemote.com> --- drivers/scsi/lpfc/lpfc_compat.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_compat.h b/drivers/scsi/lpfc/lpfc_compat.h index 6b32b0a..47d4fad 100644 --- a/drivers/scsi/lpfc/lpfc_compat.h +++ b/drivers/scsi/lpfc/lpfc_compat.h @@ -91,8 +91,8 @@ lpfc_memcpy_to_slim( void __iomem *dest, void *src, unsigned int bytes) static inline void lpfc_memcpy_from_slim( void *dest, void __iomem *src, unsigned int bytes) { - /* actually returns 1 byte past dest */ - memcpy_fromio( dest, src, bytes); + /* convert bytes in argument list to word count for copy function */ + __ioread32_copy(dest, src, bytes / sizeof(uint32_t)); } #endif /* __BIG_ENDIAN */ -- 2.7.0

6 years, 7 months

3
5
0 0

[PATCH v3 1/3] mtd: rawnand: marvell: add suspend and resume hooks

by Daniel Mack

This patch restores the suspend and resume hooks that the old driver used to have. Apart from stopping and starting the clocks, the resume callback also nullifies the selected_chip pointer, so the next command that is issued will re-select the chip and thereby restore the timing registers. Without this patch, a PXA3xx based system would cough up an error similar to the one below after resume. [ 44.660162] marvell-nfc 43100000.nand-controller: Timeout waiting for RB signal [ 44.671492] ubi0 error: ubi_io_write: error -110 while writing 2048 bytes to PEB 102:38912, written 0 bytes [ 44.682887] CPU: 0 PID: 1417 Comm: remote-control Not tainted 4.18.0-rc2+ #344 [ 44.691197] Hardware name: Marvell PXA3xx (Device Tree Support) [ 44.697111] Backtrace: [ 44.699593] [<c0106458>] (dump_backtrace) from [<c0106718>] (show_stack+0x18/0x1c) [ 44.708931] r7:00000800 r6:00009800 r5:00000066 r4:c6139000 [ 44.715833] [<c0106700>] (show_stack) from [<c0678a60>] (dump_stack+0x20/0x28) [ 44.724206] [<c0678a40>] (dump_stack) from [<c0456cbc>] (ubi_io_write+0x3d4/0x630) [ 44.732925] [<c04568e8>] (ubi_io_write) from [<c0454428>] (ubi_eba_write_leb+0x690/0x6fc) ... Signed-off-by: Daniel Mack <daniel(a)zonque.org> Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable(a)vger.kernel.org --- drivers/mtd/nand/raw/marvell_nand.c | 49 +++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 00d9f29bbdb6..4644f6e3b930 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -2825,6 +2825,54 @@ static int marvell_nfc_remove(struct platform_device *pdev) return 0; } +static int __maybe_unused marvell_nfc_suspend(struct device *dev) +{ + struct marvell_nfc *nfc = dev_get_drvdata(dev); + struct marvell_nand_chip *chip; + + list_for_each_entry(chip, &nfc->chips, node) + marvell_nfc_wait_ndrun(&chip->chip); + + clk_disable_unprepare(nfc->reg_clk); + clk_disable_unprepare(nfc->core_clk); + + return 0; +} + +static int __maybe_unused marvell_nfc_resume(struct device *dev) +{ + struct marvell_nfc *nfc = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(nfc->core_clk); + if (ret < 0) + return ret; + + if (!IS_ERR(nfc->reg_clk)) { + ret = clk_prepare_enable(nfc->reg_clk); + if (ret < 0) + return ret; + } + + /* + * Reset nfc->selected_chip so the next command will cause the timing + * registers to be restored in marvell_nfc_select_chip(). + */ + nfc->selected_chip = NULL; + + /* Reset registers that have lots its contents */ + writel_relaxed(NDCR_ALL_INT | NDCR_ND_ARB_EN | NDCR_SPARE_EN | + NDCR_RD_ID_CNT(NFCV1_READID_LEN), nfc->regs + NDCR); + writel_relaxed(0xFFFFFFFF, nfc->regs + NDSR); + writel_relaxed(0, nfc->regs + NDECCCTRL); + + return 0; +} + +static const struct dev_pm_ops marvell_nfc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(marvell_nfc_suspend, marvell_nfc_resume) +}; + static const struct marvell_nfc_caps marvell_armada_8k_nfc_caps = { .max_cs_nb = 4, .max_rb_nb = 2, @@ -2909,6 +2957,7 @@ static struct platform_driver marvell_nfc_driver = { .driver = { .name = "marvell-nfc", .of_match_table = marvell_nfc_of_ids, + .pm = &marvell_nfc_pm_ops, }, .id_table = marvell_nfc_platform_ids, .probe = marvell_nfc_probe, -- 2.17.1

6 years, 7 months

2
5
0 0

[PATCH] ubifs: xattr: Don't operate on deleted inodes

by Richard Weinberger

xattr operations can race with unlink and the following assert triggers: UBIFS assert failed in ubifs_jnl_change_xattr at 1606 (pid 6256) Fix this by checking i_nlink before working on the host inode. Cc: <stable(a)vger.kernel.org> Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard(a)nod.at> --- fs/ubifs/xattr.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c index 6f720fdf5020..09e37e63bddd 100644 --- a/fs/ubifs/xattr.c +++ b/fs/ubifs/xattr.c @@ -152,6 +152,12 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, ui->data_len = size; mutex_lock(&host_ui->ui_mutex); + + if (!host->i_nlink) { + err = -ENOENT; + goto out_noent; + } + host->i_ctime = current_time(host); host_ui->xattr_cnt += 1; host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm)); @@ -184,6 +190,7 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, host_ui->xattr_size -= CALC_XATTR_BYTES(size); host_ui->xattr_names -= fname_len(nm); host_ui->flags &= ~UBIFS_CRYPT_FL; +out_noent: mutex_unlock(&host_ui->ui_mutex); out_free: make_bad_inode(inode); @@ -235,6 +242,12 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, mutex_unlock(&ui->ui_mutex); mutex_lock(&host_ui->ui_mutex); + + if (!host->i_nlink) { + err = -ENOENT; + goto out_noent; + } + host->i_ctime = current_time(host); host_ui->xattr_size -= CALC_XATTR_BYTES(old_size); host_ui->xattr_size += CALC_XATTR_BYTES(size); @@ -256,6 +269,7 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, out_cancel: host_ui->xattr_size -= CALC_XATTR_BYTES(size); host_ui->xattr_size += CALC_XATTR_BYTES(old_size); +out_noent: mutex_unlock(&host_ui->ui_mutex); make_bad_inode(inode); out_free: @@ -482,6 +496,12 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host, return err; mutex_lock(&host_ui->ui_mutex); + + if (!host->i_nlink) { + err = -ENOENT; + goto out_noent; + } + host->i_ctime = current_time(host); host_ui->xattr_cnt -= 1; host_ui->xattr_size -= CALC_DENT_SIZE(fname_len(nm)); @@ -501,6 +521,7 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host, host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm)); host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len); host_ui->xattr_names += fname_len(nm); +out_noent: mutex_unlock(&host_ui->ui_mutex); ubifs_release_budget(c, &req); make_bad_inode(inode); @@ -540,6 +561,9 @@ static int ubifs_xattr_remove(struct inode *host, const char *name) ubifs_assert(inode_is_locked(host)); + if (!host->i_nlink) + return -ENOENT; + if (fname_len(&nm) > UBIFS_MAX_NLEN) return -ENAMETOOLONG; -- 2.18.0

6 years, 7 months

1
0
0 0

v4.14.54 build: 0 failures 0 warnings (v4.14.54)

by Build bot for Mark Brown

Tree/Branch: v4.14.54 Git describe: v4.14.54 Commit: 5893f4c3fb Linux 4.14.54 Build Time: 98 min 57 sec Passed: 11 / 11 (100.00 %) Failed: 0 / 11 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig x86_64-allmodconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

6 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2018