July 2018 - Linux-stable-mirror

FAILED: patch "[PATCH] arm64: dts: stratix10: Fix SPI nodes for Stratix10" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 4595299c5eaebbec0ca5822214ad1925a10b3876 Mon Sep 17 00:00:00 2001 From: Thor Thayer <thor.thayer(a)linux.intel.com> Date: Fri, 22 Jun 2018 13:35:38 -0500 Subject: [PATCH] arm64: dts: stratix10: Fix SPI nodes for Stratix10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable(a)vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer(a)linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen(a)kernel.org> Signed-off-by: Olof Johansson <olof(a)lixom.net> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..67dac595dc72 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -309,8 +309,7 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; @@ -322,8 +321,7 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; };

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: stratix10: Fix SPI nodes for Stratix10" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 4595299c5eaebbec0ca5822214ad1925a10b3876 Mon Sep 17 00:00:00 2001 From: Thor Thayer <thor.thayer(a)linux.intel.com> Date: Fri, 22 Jun 2018 13:35:38 -0500 Subject: [PATCH] arm64: dts: stratix10: Fix SPI nodes for Stratix10 Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable(a)vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer(a)linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen(a)kernel.org> Signed-off-by: Olof Johansson <olof(a)lixom.net> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..67dac595dc72 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -309,8 +309,7 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; @@ -322,8 +321,7 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; };

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] arm64: dts: marvell: fix CP110 ICU node size" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2f872ddcdb1e8e2186162616cea4581b8403849d Mon Sep 17 00:00:00 2001 From: Miquel Raynal <miquel.raynal(a)bootlin.com> Date: Tue, 22 May 2018 11:40:28 +0200 Subject: [PATCH] arm64: dts: marvell: fix CP110 ICU node size ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the specification). Fixes: 6ef84a827c37 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K") Cc: stable(a)vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni(a)bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..8259b32f0ced 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -149,7 +149,7 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>;

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ac9816dcbab53c57bcf1d7b15370b08f1e284318 Mon Sep 17 00:00:00 2001 From: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com> Date: Wed, 16 May 2018 17:32:14 +0530 Subject: [PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep states Init all present cpus for deep states instead of "all possible" cpus. Init fails if a possible cpu is guarded. Resulting in making only non-deep states available for cpuidle/hotplug. Stewart says, this means that for single threaded workloads, if you guard out a CPU core you'll not get WoF (Workload Optimised Frequency), which means that performance goes down when you wouldn't expect it to. Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus") Cc: stable(a)vger.kernel.org # v3.19+ Signed-off-by: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index 1f12ab1e6030..1c5d0675b43c 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -79,7 +79,7 @@ static int pnv_save_sprs_for_deep_states(void) uint64_t msr_val = MSR_IDLE; uint64_t psscr_val = pnv_deepest_stop_psscr_val; - for_each_possible_cpu(cpu) { + for_each_present_cpu(cpu) { uint64_t pir = get_hard_smp_processor_id(cpu); uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu]; @@ -814,7 +814,7 @@ static int __init pnv_init_idle_states(void) int cpu; pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n"); - for_each_possible_cpu(cpu) { + for_each_present_cpu(cpu) { int base_cpu = cpu_first_thread_sibling(cpu); int idx = cpu_thread_in_core(cpu); int i;

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ac9816dcbab53c57bcf1d7b15370b08f1e284318 Mon Sep 17 00:00:00 2001 From: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com> Date: Wed, 16 May 2018 17:32:14 +0530 Subject: [PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep states Init all present cpus for deep states instead of "all possible" cpus. Init fails if a possible cpu is guarded. Resulting in making only non-deep states available for cpuidle/hotplug. Stewart says, this means that for single threaded workloads, if you guard out a CPU core you'll not get WoF (Workload Optimised Frequency), which means that performance goes down when you wouldn't expect it to. Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus") Cc: stable(a)vger.kernel.org # v3.19+ Signed-off-by: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c index 1f12ab1e6030..1c5d0675b43c 100644 --- a/arch/powerpc/platforms/powernv/idle.c +++ b/arch/powerpc/platforms/powernv/idle.c @@ -79,7 +79,7 @@ static int pnv_save_sprs_for_deep_states(void) uint64_t msr_val = MSR_IDLE; uint64_t psscr_val = pnv_deepest_stop_psscr_val; - for_each_possible_cpu(cpu) { + for_each_present_cpu(cpu) { uint64_t pir = get_hard_smp_processor_id(cpu); uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu]; @@ -814,7 +814,7 @@ static int __init pnv_init_idle_states(void) int cpu; pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n"); - for_each_possible_cpu(cpu) { + for_each_present_cpu(cpu) { int base_cpu = cpu_first_thread_sibling(cpu); int idx = cpu_thread_in_core(cpu); int i;

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] fuse: fix congested state leak on aborted connections" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8a301eb16d99983a4961f884690ec97b92e7dcfe Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj(a)kernel.org> Date: Fri, 2 Feb 2018 09:54:14 -0800 Subject: [PATCH] fuse: fix congested state leak on aborted connections If a connection gets aborted while congested, FUSE can leave nr_wb_congested[] stuck until reboot causing wait_iff_congested() to wait spuriously which can lead to severe performance degradation. The leak is caused by gating congestion state clearing with fc->connected test in request_end(). This was added way back in 2009 by 26c3679101db ("fuse: destroy bdi on umount"). While the commit description doesn't explain why the test was added, it most likely was to avoid dereferencing bdi after it got destroyed. Since then, bdi lifetime rules have changed many times and now we're always guaranteed to have access to the bdi while the superblock is alive (fc->sb). Drop fc->connected conditional to avoid leaking congestion states. Signed-off-by: Tejun Heo <tj(a)kernel.org> Reported-by: Joshua Miller <joshmiller(a)fb.com> Cc: Johannes Weiner <hannes(a)cmpxchg.org> Cc: stable(a)vger.kernel.org # v2.6.29+ Acked-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 686631f12001..e03ca14f40e9 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -385,8 +385,7 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req) if (!fc->blocked && waitqueue_active(&fc->blocked_waitq)) wake_up(&fc->blocked_waitq); - if (fc->num_background == fc->congestion_threshold && - fc->connected && fc->sb) { + if (fc->num_background == fc->congestion_threshold && fc->sb) { clear_bdi_congested(fc->sb->s_bdi, BLK_RW_SYNC); clear_bdi_congested(fc->sb->s_bdi, BLK_RW_ASYNC); }

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] fuse: fix congested state leak on aborted connections" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 8a301eb16d99983a4961f884690ec97b92e7dcfe Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj(a)kernel.org> Date: Fri, 2 Feb 2018 09:54:14 -0800 Subject: [PATCH] fuse: fix congested state leak on aborted connections If a connection gets aborted while congested, FUSE can leave nr_wb_congested[] stuck until reboot causing wait_iff_congested() to wait spuriously which can lead to severe performance degradation. The leak is caused by gating congestion state clearing with fc->connected test in request_end(). This was added way back in 2009 by 26c3679101db ("fuse: destroy bdi on umount"). While the commit description doesn't explain why the test was added, it most likely was to avoid dereferencing bdi after it got destroyed. Since then, bdi lifetime rules have changed many times and now we're always guaranteed to have access to the bdi while the superblock is alive (fc->sb). Drop fc->connected conditional to avoid leaking congestion states. Signed-off-by: Tejun Heo <tj(a)kernel.org> Reported-by: Joshua Miller <joshmiller(a)fb.com> Cc: Johannes Weiner <hannes(a)cmpxchg.org> Cc: stable(a)vger.kernel.org # v2.6.29+ Acked-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 686631f12001..e03ca14f40e9 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -385,8 +385,7 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req) if (!fc->blocked && waitqueue_active(&fc->blocked_waitq)) wake_up(&fc->blocked_waitq); - if (fc->num_background == fc->congestion_threshold && - fc->connected && fc->sb) { + if (fc->num_background == fc->congestion_threshold && fc->sb) { clear_bdi_congested(fc->sb->s_bdi, BLK_RW_SYNC); clear_bdi_congested(fc->sb->s_bdi, BLK_RW_ASYNC); }

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] ftrace/selftest: Have the reset_trigger code be a bit more" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 756b56a9e832e063edc83be7c3889e98c536dd2b Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" <rostedt(a)goodmis.org> Date: Mon, 14 May 2018 15:40:29 -0400 Subject: [PATCH] ftrace/selftest: Have the reset_trigger code be a bit more careful The trigger code is picky in how it can be disabled as there may be dependencies between different events and synthetic events. Change the order on how triggers are reset. 1) Reset triggers of all synthetic events first 2) Remove triggers with actions attached to them 3) Remove all other triggers If this order isn't followed, then some triggers will not be reset, and an error may happen because a trigger is busy. Cc: stable(a)vger.kernel.org Fixes: cfa0963dc474f ("kselftests/ftrace : Add event trigger testcases") Reviewed-by: Namhyung Kim <namhyung(a)kernel.org> Acked-by: Masami Hiramatsu <mhiramat(a)kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 2a4f16fc9819..8393b1c06027 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -15,14 +15,29 @@ reset_tracer() { # reset the current tracer echo nop > current_tracer } -reset_trigger() { # reset all current setting triggers - grep -v ^# events/*/*/trigger | +reset_trigger_file() { + # remove action triggers first + grep -H ':on[^:]*(' $@ | + while read line; do + cmd=`echo $line | cut -f2- -d: | cut -f1 -d" "` + file=`echo $line | cut -f1 -d:` + echo "!$cmd" >> $file + done + grep -Hv ^# $@ | while read line; do cmd=`echo $line | cut -f2- -d: | cut -f1 -d" "` - echo "!$cmd" > `echo $line | cut -f1 -d:` + file=`echo $line | cut -f1 -d:` + echo "!$cmd" > $file done } +reset_trigger() { # reset all current setting triggers + if [ -d events/synthetic ]; then + reset_trigger_file events/synthetic/*/trigger + fi + reset_trigger_file events/*/*/trigger +} + reset_events_filter() { # reset all current setting filters grep -v ^none events/*/*/filter | while read line; do

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] PM / OPP: Update voltage in case freq == old_freq" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com> Date: Thu, 14 Jun 2018 15:56:08 +0200 Subject: [PATCH] PM / OPP: Update voltage in case freq == old_freq This commit fixes a rare but possible case when the clk rate is updated without update of the regulator voltage. At boot up, CPUfreq checks if the system is running at the right freq. This is a sanity check in case a bootloader set clk rate that is outside of freq table present with cpufreq core. In such cases system can be unstable so better to change it to a freq that is preset in freq-table. The CPUfreq takes next freq that is >= policy->cur and this is our target_freq that needs to be set now. dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the old_freq (a current rate). If these are equal it returns early. If not, it searches for OPP (old_opp) that fits best to old_freq (not listed in the table) and updates old_freq (!). Here, we can end up with old_freq = old_opp.rate = target_freq, which is not handled in _generic_set_opp_regulator(). It's supposed to update voltage only when freq > old_freq || freq > old_freq. if (freq > old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); [...] if (freq < old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) It results in, no voltage update while clk rate is updated. Example: freq-table = { 1000MHz 1.15V 666MHZ 1.10V 333MHz 1.05V } boot-up-freq = 800MHz # not listed in freq-table freq = target_freq = 1GHz old_freq = 800Mhz old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!) old_freq = 1GHz Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()") Cc: 4.6+ <stable(a)vger.kernel.org> # v4.6+ Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> diff --git a/drivers/opp/core.c b/drivers/opp/core.c index ab2f3fead6b1..31ff03dbeb83 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -598,7 +598,7 @@ static int _generic_set_opp_regulator(const struct opp_table *opp_table, } /* Scaling up? Scale voltage before frequency */ - if (freq > old_freq) { + if (freq >= old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) goto restore_voltage;

6 years, 7 months

1
0
0 0

[PATCH 4.4] serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version

by Daniel Wagner

From: Daniel Wagner <daniel.wagner(a)siemens.com> [ Upstream commit 8afb1d2c12163f77777f84616a8e9444d0050ebe ] Commit 40f70c03e33a ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner(a)siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [dw: Backported to 4.4.] Signed-off-by: Daniel Wagner <daniel.wagner(a)siemens.com> --- drivers/tty/serial/sh-sci.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 8dd822feb972..b63920481b1d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2419,13 +2419,12 @@ static void serial_console_write(struct console *co, const char *s, unsigned long flags; int locked = 1; - local_irq_save(flags); if (port->sysrq) locked = 0; else if (oops_in_progress) - locked = spin_trylock(&port->lock); + locked = spin_trylock_irqsave(&port->lock, flags); else - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* first save the SCSCR then disable the interrupts */ ctrl = serial_port_in(port, SCSCR); @@ -2442,8 +2441,7 @@ static void serial_console_write(struct console *co, const char *s, serial_port_out(port, SCSCR, ctrl); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int serial_console_setup(struct console *co, char *options) -- 2.14.4

6 years, 7 months

4
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2018