August 2018 - Linux-stable-mirror

[PATCH] drm: avoid spurious EBUSY due to nonblocking atomic modesets

by Daniel Vetter

When doing an atomic modeset with ALLOW_MODESET drivers are allowed to pull in arbitrary other resources, including CRTCs (e.g. when reconfiguring global resources). But in nonblocking mode userspace has then no idea this happened, which can lead to spurious EBUSY calls, both: - when that other CRTC is currently busy doing a page_flip the ALLOW_MODESET commit can fail with an EBUSY - on the other CRTC a normal atomic flip can fail with EBUSY because of the additional commit inserted by the kernel without userspace's knowledge For blocking commits this isn't a problem, because everyone else will just block until all the CRTC are reconfigured. Only thing userspace can notice is the dropped frames without any reason for why frames got dropped. Consensus is that we need new uapi to handle this properly, but no one has any idea what exactly the new uapi should look like. As a stop-gap plug this problem by demoting nonblocking commits which might cause issues by including CRTCs not in the original request to blocking commits. v2: Add comments and a WARN_ON to enforce this only when allowed - we don't want to silently convert page flips into blocking plane updates just because the driver is buggy. References: https://lists.freedesktop.org/archives/dri-devel/2018-July/182281.html Bugzilla: https://gitlab.freedesktop.org/wayland/weston/issues/24#note_9568 Cc: Daniel Stone <daniel(a)fooishbar.org> Cc: Pekka Paalanen <pekka.paalanen(a)collabora.co.uk> Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter(a)intel.com> --- drivers/gpu/drm/drm_atomic.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index d5cefb1cb2a2..058512f14772 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -2018,15 +2018,43 @@ EXPORT_SYMBOL(drm_atomic_commit); int drm_atomic_nonblocking_commit(struct drm_atomic_state *state) { struct drm_mode_config *config = &state->dev->mode_config; - int ret; + unsigned requested_crtc = 0; + unsigned affected_crtc = 0; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + bool nonblocking = true; + int ret, i; + + /* + * For commits that allow modesets drivers can add other CRTCs to the + * atomic commit, e.g. when they need to reallocate global resources. + * + * But when userspace also requests a nonblocking commit then userspace + * cannot know that the commit affects other CRTCs, which can result in + * spurious EBUSY failures. Until we have better uapi plug this by + * demoting such commits to blocking mode. + */ + for_each_new_crtc_in_state(state, crtc, crtc_state, i) + requested_crtc |= drm_crtc_mask(crtc); ret = drm_atomic_check_only(state); if (ret) return ret; - DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state); + for_each_new_crtc_in_state(state, crtc, crtc_state, i) + affected_crtc |= drm_crtc_mask(crtc); + + if (affected_crtc != requested_crtc) { + /* adding other CRTC is only allowed for modeset commits */ + WARN_ON(state->allow_modeset); + + DRM_DEBUG_ATOMIC("demoting %p to blocking mode to avoid EBUSY\n", state); + nonblocking = false; + } else { + DRM_DEBUG_ATOMIC("committing %p nonblocking\n", state); + } - return config->funcs->atomic_commit(state->dev, state, true); + return config->funcs->atomic_commit(state->dev, state, nonblocking); } EXPORT_SYMBOL(drm_atomic_nonblocking_commit); -- 2.18.0

4 years, 2 months

3
11
0 0

[PATCH] [Patch v2] usbtv: Fix refcounting mixup

by Oliver Neukum

The premature free in the error path is blocked by V4L refcounting, not USB refcounting. Thanks to Ben Hutchings for review. [v2] corrected attributions Signed-off-by: Oliver Neukum <oneukum(a)suse.com> Fixes: 50e704453553 ("media: usbtv: prevent double free in error case") CC: stable(a)vger.kernel.org Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> --- drivers/media/usb/usbtv/usbtv-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c index 5095c380b2c1..4a03c4d66314 100644 --- a/drivers/media/usb/usbtv/usbtv-core.c +++ b/drivers/media/usb/usbtv/usbtv-core.c @@ -113,7 +113,8 @@ static int usbtv_probe(struct usb_interface *intf, usbtv_audio_fail: /* we must not free at this point */ - usb_get_dev(usbtv->udev); + v4l2_device_get(&usbtv->v4l2_dev); + /* this will undo the v4l2_device_get() */ usbtv_video_free(usbtv); usbtv_video_fail: -- 2.13.6

4 years, 2 months

3
7
0 0

[PATCH 1/2] i2c: i801: Fix runtime PM

by Jarkko Nikula

Commit 9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") nullified the runtime PM suspend/resume callback pointers while keeping the runtime PM enabled. This causes that device stays in D0 power state and sysfs /sys/bus/pci/devices/.../power/runtime_status shows "error" when runtime PM framework attempts to autosuspend the device. This is due PCI bus runtime PM which checks for driver runtime PM callbacks and returns with -ENOSYS if they are not set. Fix this by having a shared dummy runtime PM callback that returns with success. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Jarkko Nikula <jarkko.nikula(a)linux.intel.com> --- drivers/i2c/busses/i2c-i801.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index aa726607645e..3747484c2669 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1731,7 +1731,20 @@ static int i801_resume(struct device *dev) } #endif -static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume); +static int __maybe_unused i801_runtime_nop(struct device *dev) +{ + /* + * PCI core expects runtime PM suspend/resume callbacks return + * successfully before really suspending/resuming the device. + * Have a shared dummy callback that returns with success. + */ + return 0; +} + +static const struct dev_pm_ops i801_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(i801_suspend, i801_resume) + SET_RUNTIME_PM_OPS(i801_runtime_nop, i801_runtime_nop, NULL) +}; static struct pci_driver i801_driver = { .name = "i801_smbus", -- 2.18.0

4 years, 3 months

5
6
0 0

[PATCH v2 1/3] fs/fuse, splice_write: Don't access pipe->buffers without pipe_lock()

by Andrey Ryabinin

fuse_dev_splice_write() reads pipe->buffers to determine the size of 'bufs' array before taking the pipe_lock(). This is not safe as another thread might change the 'pipe->buffers' between the allocation and taking the pipe_lock(). So we end up with too small 'bufs' array. Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this. Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device") Signed-off-by: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: <stable(a)vger.kernel.org> --- fs/fuse/dev.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index c6b88fa85e2e..702592cce546 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1944,12 +1944,15 @@ static ssize_t fuse_dev_splice_write(struct pipe_inode_info *pipe, if (!fud) return -EPERM; + pipe_lock(pipe); + bufs = kmalloc_array(pipe->buffers, sizeof(struct pipe_buffer), GFP_KERNEL); - if (!bufs) + if (!bufs) { + pipe_unlock(pipe); return -ENOMEM; + } - pipe_lock(pipe); nbuf = 0; rem = 0; for (idx = 0; idx < pipe->nrbufs && rem < len; idx++) -- 2.16.4

5 years, 5 months

2
2
0 0

[Linux-stable-mirror] [PATCH] drbd: fix discard_zeroes_if_aligned regression

by Eric Wheeler

From: Eric Wheeler <git(a)linux.ewheeler.net> According to drbd.conf documentation, "To not break established and expected behaviour, and suddenly cause fstrim on thin-provisioned LVs to run out-of-space instead of freeing up space, the default value is yes." This behavior regressed in the REQ_OP_WRITE_ZEROES refactor near 45c21793 drbd: implement REQ_OP_WRITE_ZEROES 0dbed96 drbd: make intelligent use of blkdev_issue_zeroout which caused dm-thin backed DRBD volumes to zero blocks and run out of space instead of passing discard to the backing device as defined by the discard_zeroes_if_aligned option. A helper function could reduce code duplication. Signed-off-by: Eric Wheeler <drbd(a)linux.ewheeler.net> Cc: <stable(a)vger.kernel.org> # 4.14 --- drivers/block/drbd/drbd_receiver.c | 22 ++++++++++++++++++++-- drivers/block/drbd/drbd_req.c | 23 +++++++++++++++++++++-- 2 files changed, 41 insertions(+), 4 deletions(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 62a902f..58f0e43 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1507,9 +1507,27 @@ void drbd_bump_write_ordering(struct drbd_resource *resource, struct drbd_backin static void drbd_issue_peer_discard(struct drbd_device *device, struct drbd_peer_request *peer_req) { struct block_device *bdev = device->ldev->backing_bdev; + struct disk_conf *dc; + bool discard_zeroes_if_aligned, zeroout; - if (blkdev_issue_zeroout(bdev, peer_req->i.sector, peer_req->i.size >> 9, - GFP_NOIO, 0)) + rcu_read_lock(); + dc = rcu_dereference(device->ldev->disk_conf); + discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned; + rcu_read_unlock(); + + /* Use zeroout unless discard_zeroes_if_aligned is set. + * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout. + * See also drbd_process_discard_req() in drbd_req.c. + */ + zeroout = true; + if (discard_zeroes_if_aligned && + blkdev_issue_discard(bdev, peer_req->i.sector, + peer_req->i.size >> 9, GFP_NOIO, 0) == 0) + zeroout = false; + + if (zeroout && + blkdev_issue_zeroout(bdev, peer_req->i.sector, + peer_req->i.size >> 9, GFP_NOIO, 0) != 0) peer_req->flags |= EE_WAS_ERROR; drbd_endio_write_sec_final(peer_req); diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index de8566e..070b5e7 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -1158,9 +1158,28 @@ static int drbd_process_write_request(struct drbd_request *req) static void drbd_process_discard_req(struct drbd_request *req) { struct block_device *bdev = req->device->ldev->backing_bdev; + struct drbd_device *device = req->device; + struct disk_conf *dc; + bool discard_zeroes_if_aligned, zeroout; - if (blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9, - GFP_NOIO, 0)) + rcu_read_lock(); + dc = rcu_dereference(device->ldev->disk_conf); + discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned; + rcu_read_unlock(); + + /* Use zeroout unless discard_zeroes_if_aligned is set. + * If blkdev_issue_discard fails, then retry with blkdev_issue_zeroout. + * See also drbd_issue_peer_discard() in drbd_receiver.c. + */ + zeroout = true; + if (discard_zeroes_if_aligned && + blkdev_issue_discard(bdev, req->i.sector, req->i.size >> 9, + GFP_NOIO, 0) == 0) + zeroout = false; + + if (zeroout && + blkdev_issue_zeroout(bdev, req->i.sector, req->i.size >> 9, + GFP_NOIO, 0) != 0) req->private_bio->bi_status = BLK_STS_IOERR; bio_endio(req->private_bio); } -- 1.8.3.1

5 years, 6 months

3
4
0 0

aacraid: Regression in 4.14.56 with *genirq/affinity: assign vectors to all possible CPUs*

by Paul Menzel

Dear Greg, Commit ef86f3a7 (genirq/affinity: assign vectors to all possible CPUs) added for Linux 4.14.56 causes the aacraid module to not detect the attached devices anymore on a Dell PowerEdge R720 with two six core 24x E5-2630 @ 2.30GHz. ``` $ dmesg | grep raid [ 0.269768] raid6: sse2x1 gen() 7179 MB/s [ 0.290069] raid6: sse2x1 xor() 5636 MB/s [ 0.311068] raid6: sse2x2 gen() 9160 MB/s [ 0.332076] raid6: sse2x2 xor() 6375 MB/s [ 0.353075] raid6: sse2x4 gen() 11164 MB/s [ 0.374064] raid6: sse2x4 xor() 7429 MB/s [ 0.379001] raid6: using algorithm sse2x4 gen() 11164 MB/s [ 0.386001] raid6: .... xor() 7429 MB/s, rmw enabled [ 0.391008] raid6: using ssse3x2 recovery algorithm [ 3.559682] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.570061] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 10.725767] Adaptec aacraid driver 1.2.1[50834]-custom [ 10.731724] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.743295] aacraid: Comm Interface type3 enabled $ lspci -nn | grep Adaptec 04:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01) 42:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01) ``` But, it still works with a Dell PowerEdge R715 with two eight core AMD Opteron 6136, the card below. ``` $ lspci -nn | grep Adaptec 22:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01) ``` Reverting the commit fixes the issue. commit ef86f3a72adb8a7931f67335560740a7ad696d1d Author: Christoph Hellwig <hch(a)lst.de> Date: Fri Jan 12 10:53:05 2018 +0800 genirq/affinity: assign vectors to all possible CPUs commit 84676c1f21e8ff54befe985f4f14dc1edc10046b upstream. Currently we assign managed interrupt vectors to all present CPUs. This works fine for systems were we only online/offline CPUs. But in case of systems that support physical CPU hotplug (or the virtualized version of it) this means the additional CPUs covered for in the ACPI tables or on the command line are not catered for. To fix this we'd either need to introduce new hotplug CPU states just for this case, or we can start assining vectors to possible but not present CPUs. Reported-by: Christian Borntraeger <borntraeger(a)de.ibm.com> Tested-by: Christian Borntraeger <borntraeger(a)de.ibm.com> Tested-by: Stefan Haberland <sth(a)linux.vnet.ibm.com> Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU") Cc: linux-kernel(a)vger.kernel.org Cc: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> The problem doesn’t happen with Linux 4.17.11, so there are commits in Linux master fixing this. Unfortunately, my attempts to find out failed. I was able to cherry-pick the three commits below on top of 4.14.62, but the problem persists. 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error 355d7ecdea35 scsi: hpsa: fix selection of reply queue e944e9615741 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity Trying to cherry-pick the commits below, referencing the commit in question, gave conflicts. 1. adbe552349f2 scsi: megaraid_sas: fix selection of reply queue 2. d3056812e7df genirq/affinity: Spread irq vectors among present CPUs as far as possible To avoid further trial and error with the server with a slow firmware, do you know what commits should fix the issue? Kind regards, Paul PS: I couldn’t find, who suggested this for stable, that means how it was picked to be added to stable. Is there an easy way to find that out?

5 years, 9 months

6
20
0 0

Please include d391f120706726826 in v4.9.y [x86/kvm/vmx]: do not use vm-exit instruction length for fast MMIO when running nested

by Mike Haboustak

The following commit fixes freezes in virtio device drivers when KVM is nested under VMWare Workstation/ESXi or Hyper-V. I've encountered problems running KVM inside VMWare since upgrading to Debian 9 (currently testing 4.9.88-1+deb9u1). d391f1207067268261add0485f0f34503539c5b0 The same issue affects 4.4.y as well. A git-bisect within my environment stopped at e9ea5069d9e569c32ab913c39467df32e056b3a7, where the KVM capability was added that QEMU checks before enabling fast mmio. Thanks, Mike

5 years, 11 months

2
4
0 0

[PATCH stable 3.9 to 3.16] staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()

by Ian Abbott

From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 1376b0a2160319125c3a2822e8c09bd283cd8141 ] There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Reviewed-by: Ian Abbott <abbotti(a)mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index b3bbec0a0d23..f89a863ea04c 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -649,7 +649,7 @@ static int daqp_ao_insn_write(struct comedi_device *dev, /* Make sure D/A update mode is direct update */ outb(0, dev->iobase + DAQP_AUX); - for (i = 0; i > insn->n; i++) { + for (i = 0; i < insn->n; i++) { val = data[0]; val &= 0x0fff; val ^= 0x0800; /* Flip the sign */ -- 2.18.0

5 years, 11 months

2
6
0 0

Re: [PATCH v5 2/3] ARM: ftrace/recordmcount: filter relocation types

by Sasha Levin

Hi, [This is an automated email] This commit has been processed by the -stable helper bot and determined to be a high probability candidate for -stable trees. (score: 46.9374) The bot has tested the following trees: v4.16.1, v4.15.16, v4.14.33, v4.9.93, v4.4.127. v4.16.1: Build OK! v4.15.16: Build OK! v4.14.33: Build OK! v4.9.93: Failed to apply! Possible dependencies: 9648dc15772d ("recordmcount: arm: Implement make_nop") v4.4.127: Failed to apply! Possible dependencies: 9648dc15772d ("recordmcount: arm: Implement make_nop") Please let us know if you'd like to have this patch included in a stable tree. -- Thanks, Sasha

6 years

3
2
0 0

[Linux-stable-mirror] [PATCH v2] usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume

by Roger Quadros

In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init() must be doene before dwc3_core_get_phy(). commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") broke this. The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should be called only once during the life cycle of the driver. However, as dwc3_core_init() is called during system suspend/resume it will result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init() which is wrong. Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup() into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that dwc3_core_ulpi_init() is called only once from dwc3_core_init(). Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from dwc3_core_init(). Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") Cc: linux-stable <stable(a)vger.kernel.org> # >= v4.13 Signed-off-by: Roger Quadros <rogerq(a)ti.com> --- Changelog: v2: - don't break ULPI case. Also take into consideration suspend/resume for ULPI case. drivers/usb/dwc3/core.c | 47 ++++++++++++++++++++++++++++++++++++----------- drivers/usb/dwc3/core.h | 5 +++++ 2 files changed, 41 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0783250..84382f6 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -482,6 +482,22 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } +static int dwc3_core_ulpi_init(struct dwc3 *dwc) +{ + int intf; + int ret = 0; + + intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3); + + if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI || + (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI && + dwc->hsphy_interface && + !strncmp(dwc->hsphy_interface, "ulpi", 4))) + ret = dwc3_ulpi_init(dwc); + + return ret; +} + /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure @@ -493,7 +509,6 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_phy_setup(struct dwc3 *dwc) { u32 reg; - int ret; reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); @@ -564,9 +579,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* FALLTHROUGH */ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI: - ret = dwc3_ulpi_init(dwc); - if (ret) - return ret; /* FALLTHROUGH */ default: break; @@ -723,6 +735,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) } static int dwc3_core_get_phy(struct dwc3 *dwc); +static int dwc3_core_ulpi_init(struct dwc3 *dwc); /** * dwc3_core_init - Low-level initialization of DWC3 Core @@ -754,17 +767,27 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; - ret = dwc3_core_soft_reset(dwc); - if (ret) - goto err0; + if (!dwc->ulpi_ready) { + ret = dwc3_core_ulpi_init(dwc); + if (ret) + goto err0; + dwc->ulpi_ready = true; + } - ret = dwc3_phy_setup(dwc); + if (!dwc->phys_ready) { + ret = dwc3_core_get_phy(dwc); + if (ret) + goto err0a; + dwc->phys_ready = true; + } + + ret = dwc3_core_soft_reset(dwc); if (ret) - goto err0; + goto err0a; dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -837,6 +860,9 @@ static int dwc3_core_init(struct dwc3 *dwc) phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); +err0a: + dwc3_ulpi_exit(dwc); + err0: return ret; } @@ -1229,7 +1255,6 @@ static int dwc3_probe(struct platform_device *pdev) err3: dwc3_free_event_buffers(dwc); - dwc3_ulpi_exit(dwc); err2: pm_runtime_allow(&pdev->dev); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4a4a4c9..6b202e3 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -795,7 +795,9 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface + * @ulpi_ready: flag to indicate that ULPI is initialized * @isoch_delay: wValue from Set Isochronous Delay request; * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. @@ -893,7 +895,10 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + bool phys_ready; + struct ulpi *ulpi; + bool ulpi_ready; void __iomem *regs; size_t regs_size; -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

6 years

3
7
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2018