September 2018 - Linux-stable-mirror

[PATCH] perf/x86/intel/uncore: Fix PCI BDF address of M3UPI on SKX

by kan.liang＠linux.intel.com

From: Kan Liang <kan.liang(a)linux.intel.com> The counters on M3UPI Link 0 and Link 3 don't count. Writing 0 to these counters may causes system crash on some machines. The PCI BDF addresses of M3UPI in current code are incorrect. The correct addresses should be D18:F1 0x204D D18:F2 0x204E D18:F5 0x204D Signed-off-by: Kan Liang <kan.liang(a)linux.intel.com> --- arch/x86/events/intel/uncore_snbep.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index 51d7c11..3b3fc92 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -3931,16 +3931,16 @@ static const struct pci_device_id skx_uncore_pci_ids[] = { .driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 5, SKX_PCI_UNCORE_M2PCIE, 3), }, { /* M3UPI0 Link 0 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 0, SKX_PCI_UNCORE_M3UPI, 0), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 0), }, { /* M3UPI0 Link 1 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 1), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204E), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 2, SKX_PCI_UNCORE_M3UPI, 1), }, { /* M3UPI1 Link 2 */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C), - .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 4, SKX_PCI_UNCORE_M3UPI, 2), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D), + .driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 5, SKX_PCI_UNCORE_M3UPI, 2), }, { /* end: all zeroes */ } }; -- 2.7.4

6 years, 8 months

3
2
0 0

[GIT PULL] commits for Linux 4.18

by Sasha Levin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi Greg, Pleae pull commits for Linux 4.18 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit dfba61ec760efc578a3f3702e752b51ca1dfed52: Linux 4.18.8 (2018-09-15 09:47:02 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git tags/for-greg-4.18-17092018 for you to fetch changes up to 77d141736c922f90410b6acf877fe335335d9571: xen-netfront: fix warn message as irq device name has '/' (2018-09-15 10:22:00 -0400) - ---------------------------------------------------------------- for-greg-4.18-17092018 - ---------------------------------------------------------------- Alexandru Gagniuc (1): PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST Andreas Gruenbacher (1): gfs2: Special-case rindex for gfs2_grow Anton Vasilyev (1): video: goldfishfb: fix memory leak on driver remove Ard Biesheuvel (1): efi/arm: preserve early mapping of UEFI memory map longer for BGRT Arnd Bergmann (1): omapfb: rename omap2 module to omap2fb.ko Bhushan Shah (1): ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci Bjorn Andersson (1): soc: qcom: smem: Correct check for global partition Bob Peterson (1): gfs2: Don't reject a supposedly full bitmap if we have blocks reserved Christoffer Dall (1): KVM: arm/arm64: Fix vgic init race Dan Carpenter (1): fbdev: omapfb: off by one in omapfb_register_client() Daniel Mack (1): video: fbdev: pxafb: clear allocated memory for video modes Dmitry Torokhov (1): Input: pxrc - fix freeing URB on device teardown Erich E. Hoover (1): usb: dwc3: change stream event enable bit back to 13 Felix Fietkau (1): MIPS: ath79: fix system restart Fredrik Noring (1): fbdev: Distinguish between interlaced and progressive modes Golan Ben Ami (1): iwlwifi: cancel the injective function between hw pointers to tfd entry index Gregory CLEMENT (1): clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent Hanna Hawa (1): dmaengine: mv_xor_v2: kill the tasklets upon exit Hans Verkuil (1): media: videobuf2-core: check for q->error in vb2_core_qbuf() Jae Hyun Yoo (1): i2c: aspeed: Fix initial values of master and slave state Jakub Kicinski (2): nfp: don't fail probe on pci_sriov_set_totalvfs() errors nfp: avoid buffer leak when FW communication fails Jean-Philippe Brucker (2): iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE iommu/io-pgtable-arm: Fix pgtable allocation in selftest Jeff Crukley (1): ALSA: usb-audio: Add support for Encore mDSD USB DAC Jiang Biao (2): x86/pti: Check the return value of pti_user_pagetable_walk_p4d() x86/pti: Check the return value of pti_user_pagetable_walk_pmd() Jiri Olsa (2): perf tools: Synthesize GROUP_DESC feature in pipe mode perf tools: Fix struct comm_str removal crash Joerg Roedel (1): x86/mm/pti: Add an overflow check to pti_clone_pmds() John Keeping (1): dmaengine: pl330: fix irq race with terminate_all Julian Wiedmann (2): s390/qeth: fix race in used-buffer accounting s390/qeth: reset layer2 attribute on layer switch Krzysztof Ha?asa (1): media: tw686x: Fix oops on buffer alloc failure Krzysztof Kozlowski (1): ARM: exynos: Clear global variable on init error path Leonard Crestez (1): reset: imx7: Fix always writing bits as 0 Loic Poulain (1): arm64: dts: qcom: db410c: Fix Bluetooth LED trigger Manikanta Pubbisetty (1): mac80211: restrict delayed tailroom needed decrement Mark Rutland (2): KVM: arm/arm64: vgic: Fix possible spectre-v1 write in vgic_mmio_write_apr() arm64: fix possible spectre-v1 write in ptrace_hbp_set_event() Masahiro Yamada (2): kbuild: add .DELETE_ON_ERROR special target kbuild: do not update config when running install targets Miao Zhong (1): iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register Michael MÃ¼ller (1): crypto: sharah - Unregister correct algorithms for SAHARA 3 Mike Snitzer (1): block: allow max_discard_segments to be stacked Mikko Perttunen (1): clk: core: Potentially free connection id Nicholas Mc Guire (4): clk: imx6ul: fix missing of_node_put() clk: imx6sll: fix missing of_node_put() staging: bcm2835-camera: fix timeout handling in wait_for_completion_timeout staging: bcm2835-camera: handle wait_for_completion_timeout return properly Nicholas Piggin (1): powerpc/powernv: opal_put_chars partial write fix Niklas Cassel (2): regulator: qcom_spmi: Use correct regmap when checking for error regulator: qcom_spmi: Fix warning Bad of_node_put() Oder Chiou (1): ASoC: rt5514: Fix the issue of the delay volume applied Paul Cercueil (1): MIPS: jz4740: Bump zload address Pingfan Liu (1): drivers/base: stop new probing during shutdown Piotr Sawicki (1): Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets Rajan Vaja (1): clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure Randy Dunlap (3): mtd/maps: fix solutionengine.c printk format warnings fbdev/via: fix defined but not used warning platform/x86: toshiba_acpi: Fix defined but not used build warnings Rex Zhu (1): drm/amd/pp: Set Max clock level to display by default Sagi Grimberg (2): nvmet: fix file discard return status nvme-rdma: unquiesce queues when deleting the controller Sandipan Das (6): perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64 perf tests: Fix record+probe_libc_inet_pton.sh when event exists perf tests: Fix record+probe_libc_inet_pton.sh to ensure cleanups perf powerpc: Fix callchain ip filtering when return address is in a register perf powerpc: Fix callchain ip filtering perf script: Show correct offsets for DWARF-based unwinding Takashi Iwai (3): ALSA: pcm: Add __force to cast in snd_pcm_lib_read/write() ALSA: msnd: Fix the default sample sizes ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro Thomas Richter (1): perf test: Fix subtest number when showing results Todor Tomov (1): media: ov5645: Supported external clock is 24MHz Vitaly Kuznetsov (1): xen-netfront: fix queue name setting Wei Yongjun (1): IB/ipoib: Fix error return code in ipoib_dev_init() Xiao Liang (1): xen-netfront: fix warn message as irq device name has '/' Yoshihiro Shimoda (1): iommu/ipmmu-vmsa: IMUCTRn.TTSEL needs a special usage on R-Car Gen3 Yue Wang (1): ALSA: usb-audio: Generic DSD detection for Thesycon-based implementations YueHaibing (3): xfrm: fix 'passing zero to ERR_PTR()' warning amd-xgbe: use dma_mapping_error to check map errors wan/fsl_ucc_hdlc: use IS_ERR_VALUE() to check return value of qe_muram_alloc Zhu Yanjun (1): IB/rxe: Drop QP0 silently Makefile | 27 ++++++--- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 + arch/arm/mach-exynos/suspend.c | 1 + arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +- arch/arm64/kernel/ptrace.c | 19 ++++--- arch/mips/ath79/setup.c | 1 + arch/mips/include/asm/mach-ath79/ath79.h | 1 + arch/mips/jz4740/Platform | 2 +- arch/powerpc/platforms/powernv/opal.c | 2 +- arch/x86/mm/pti.c | 25 ++++++-- block/blk-settings.c | 2 +- drivers/base/core.c | 3 + drivers/clk/clk-fixed-factor.c | 9 ++- drivers/clk/clk.c | 3 + drivers/clk/imx/clk-imx6sll.c | 1 + drivers/clk/imx/clk-imx6ul.c | 1 + drivers/clk/mvebu/armada-37xx-periph.c | 3 - drivers/crypto/sahara.c | 4 +- drivers/dma/mv_xor_v2.c | 2 + drivers/dma/pl330.c | 5 +- drivers/firmware/efi/arm-init.c | 1 - drivers/firmware/efi/arm-runtime.c | 4 +- drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 9 ++- drivers/i2c/busses/i2c-aspeed.c | 4 +- drivers/infiniband/sw/rxe/rxe_recv.c | 9 ++- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +- drivers/input/joystick/pxrc.c | 66 ++++++++++------------ drivers/iommu/arm-smmu-v3.c | 1 + drivers/iommu/io-pgtable-arm-v7s.c | 7 ++- drivers/iommu/io-pgtable-arm.c | 3 +- drivers/iommu/ipmmu-vmsa.c | 8 +++ drivers/media/common/videobuf2/videobuf2-core.c | 5 ++ drivers/media/i2c/ov5645.c | 13 +++-- drivers/media/pci/tw686x/tw686x-video.c | 11 +++- drivers/mtd/maps/solutionengine.c | 6 +- drivers/net/ethernet/amd/xgbe/xgbe-desc.c | 7 +-- drivers/net/ethernet/netronome/nfp/nfp_main.c | 20 ++++--- .../net/ethernet/netronome/nfp/nfp_net_common.c | 13 ++++- drivers/net/wan/fsl_ucc_hdlc.c | 6 +- drivers/net/wireless/intel/iwlwifi/pcie/internal.h | 12 ++-- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 11 +++- drivers/net/xen-netfront.c | 6 +- drivers/nvme/host/rdma.c | 2 + drivers/nvme/target/io-cmd-file.c | 18 +++--- drivers/pci/pcie/aer.c | 6 ++ drivers/platform/x86/toshiba_acpi.c | 3 +- drivers/regulator/qcom_spmi-regulator.c | 34 ++++++----- drivers/reset/reset-imx7.c | 2 +- drivers/s390/net/qeth_core_main.c | 3 +- drivers/s390/net/qeth_core_sys.c | 1 + drivers/soc/qcom/smem.c | 10 ++-- .../vc04_services/bcm2835-camera/bcm2835-camera.c | 7 ++- .../vc04_services/bcm2835-camera/mmal-vchiq.c | 11 ++-- drivers/usb/dwc3/gadget.h | 2 +- drivers/video/fbdev/core/modedb.c | 41 ++++++++++---- drivers/video/fbdev/goldfishfb.c | 1 + drivers/video/fbdev/omap/omapfb_main.c | 2 +- drivers/video/fbdev/omap2/omapfb/Makefile | 4 +- drivers/video/fbdev/pxafb.c | 4 +- drivers/video/fbdev/via/viafbdev.c | 3 +- fs/gfs2/bmap.c | 2 +- fs/gfs2/rgrp.c | 3 +- include/sound/pcm.h | 4 +- net/mac80211/cfg.c | 2 +- net/mac80211/key.c | 24 +++++--- net/xfrm/xfrm_policy.c | 5 +- scripts/Kbuild.include | 3 + security/smack/smack_lsm.c | 14 +++-- sound/isa/msnd/msnd_pinnacle.c | 4 +- sound/soc/codecs/rt5514.c | 8 +-- sound/usb/quirks-table.h | 3 +- sound/usb/quirks.c | 2 + tools/perf/arch/powerpc/util/skip-callchain-idx.c | 10 +++- tools/perf/tests/builtin-test.c | 2 +- .../tests/shell/record+probe_libc_inet_pton.sh | 36 ++++++++++-- tools/perf/util/comm.c | 16 ++++-- tools/perf/util/header.c | 2 +- tools/perf/util/machine.c | 9 ++- tools/perf/util/unwind-libdw.c | 2 +- tools/perf/util/unwind-libunwind-local.c | 2 +- virt/kvm/arm/vgic/vgic-init.c | 4 ++ virt/kvm/arm/vgic/vgic-mmio-v2.c | 3 + 82 files changed, 436 insertions(+), 218 deletions(-) -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAlugPMwACgkQ3qZv95d3 LNyyIw//fOsB+VO3qSfxAB+nCIH6xaO7jWW8EIAaFYGIFjhgm8dDvXmTR2zv4OsW MoDPTfQXCmsWnwnymTEvlopu3tEMKK0R8uHXMpkSByCP6ie5WE6DJ2zjex+yqEDM W5gUBQVK9Qj3OzQxA4YbHtUKRXNVE/EtMqOrgjuRw08brdCXxbqt48iOm3EC+lFq nrKquXCvRggBguPV1xKoFP9bwTafClQ0owuPS6OWdTBWNu2B7X2dua3jBW64yX1V wru3/MznYgcC/yKsauimLeS99x2Y3I+He0udEyCII4ylsgWzZJg6O9uvNi9HnuP+ qFg+ew4ecb+MFH31RjEkipHg3thAFdMdMC1pNzZLdaof03wMWV2DsioA4newv+Px jzW8vikqQC51MeVIbEIiCAkoFf4yZjIOehvi70s4TsaCOwxKusntP0jvUGDxWS6A GmU6wpoeqBAUZoWFspLbhrkOZanOCncdBUFSBgS0xX4som9j+jnHYAf3cyz7Iuj0 jeenjgM5vqL2jyOh18gz2BYTQT+kHsuJ/bD6OS5AEcgNlnTLC5SRlVYrFHopzt8Z 8yp1kko8LhTAXDaTwXuhi30DrStJzM1Cnm0pbi/XnRSLEpXRLWx3f5ODTQvID4d9 IksJxN7G+Mm7Bc/obEVytvnslSVvFFWzmJKhYRYbpAmfHT4Byo8= =A0j/ -----END PGP SIGNATURE-----

6 years, 8 months

2
1
0 0

[PATCH] powerpc: fix csum_ipv6_magic() on little endian platforms

by Christophe Leroy

On little endian platforms, csum_ipv6_magic() keeps len and proto in CPU byte order. This generates a bad results leading to ICMPv6 packets from other hosts being dropped by powerpc64le platforms. In order to fix this, len and proto should be converted to network byte order ie bigendian byte order. However checksumming 0x12345678 and 0x56341278 provide the exact same result so it is enough to rotate the sum of len and proto by 1 byte. PPC32 only support bigendian so the fix is needed for PPC64 only Fixes: e9c4943a107b ("powerpc: Implement csum_ipv6_magic in assembly") Reported-by: Jianlin Shi <jishi(a)redhat.com> Reported-by: Xin Long <lucien.xin(a)gmail.com> Cc: <stable(a)vger.kernel.org> # 4.18+ Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> --- arch/powerpc/lib/checksum_64.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index 886ed94b9c13..2a68c43e13f5 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -443,6 +443,9 @@ _GLOBAL(csum_ipv6_magic) addc r0, r8, r9 ld r10, 0(r4) ld r11, 8(r4) +#ifndef CONFIG_CPU_BIG_ENDIAN + rotldi r5, r5, 8 +#endif adde r0, r0, r10 add r5, r5, r7 adde r0, r0, r11 -- 2.13.3

6 years, 8 months

4
3
0 0

[PATCH] spi: spi-mem: Adjust op len based on message/transfer size limitations

by Chuanhua Han

We need that to adjust the len of the 2nd transfer (called data in spi-mem) if it's too long to fit in a SPI message or SPI transfer. Fixes: c36ff266dc82 ("spi: Extend the core to ease integration of SPI memory controllers") Cc: <stable(a)vger.kernel.org> Signed-off-by: Chuanhua Han <chuanhua.han(a)nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon(a)bootlin.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/spi/spi-mem.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 990770dfa5cf..ec0c24e873cd 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -328,10 +328,25 @@ EXPORT_SYMBOL_GPL(spi_mem_exec_op); int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) { struct spi_controller *ctlr = mem->spi->controller; + size_t len; + + len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size) return ctlr->mem_ops->adjust_op_size(mem, op); + if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) { + if (len > spi_max_transfer_size(mem->spi)) + return -EINVAL; + + op->data.nbytes = min3((size_t)op->data.nbytes, + spi_max_transfer_size(mem->spi), + spi_max_message_size(mem->spi) - + len); + if (!op->data.nbytes) + return -EINVAL; + } + return 0; } EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size); -- 2.17.1

6 years, 8 months

1
1
0 0

[PATCH] apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling

by Loic

Hello, Tested without any problem so please picked up this for 4.4 to fix the problem. The patch below is slightly modified to adapt to this version. [ Upstream commit 7616ac70d1bb4f2e9d25c1a82d283f3368a7b632 ] The newly added Kconfig option could never work and just causes a build error when disabled: security/apparmor/lsm.c:675:25: error: 'CONFIG_SECURITY_APPARMOR_HASH_DEFAULT' undeclared here (not in a function) bool aa_g_hash_policy = CONFIG_SECURITY_APPARMOR_HASH_DEFAULT; The problem is that the macro undefined in this case, and we need to use the IS_ENABLED() helper to turn it into a boolean constant. Another minor problem with the original patch is that the option is even offered in sysfs when SECURITY_APPARMOR_HASH is not enabled, so this also hides the option in that case. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Fixes: 6059f71f1e94 ("apparmor: add parameter to control whether policy hashing is used") Signed-off-by: John Johansen <john.johansen(a)canonical.com> Signed-off-by: James Morris <james.l.morris(a)oracle.com> --- diff -Nurp a/security/apparmor/crypto.c b/security/apparmor/crypto.c --- a/security/apparmor/crypto.c +++ b/security/apparmor/crypto.c @@ -39,6 +39,9 @@ int aa_calc_profile_hash(struct aa_profi int error = -ENOMEM; u32 le32_version = cpu_to_le32(version); + if (!aa_g_hash_policy) + return 0; + if (!apparmor_tfm) return 0; diff -Nurp a/security/apparmor/lsm.c b/security/apparmor/lsm.c --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -692,6 +692,12 @@ enum profile_mode aa_g_profile_mode = AP module_param_call(mode, param_set_mode, param_get_mode, &aa_g_profile_mode, S_IRUSR | S_IWUSR); +#ifdef CONFIG_SECURITY_APPARMOR_HASH +/* whether policy verification hashing is enabled */ +bool aa_g_hash_policy = IS_ENABLED(CONFIG_SECURITY_APPARMOR_HASH_DEFAULT); +module_param_named(hash_policy, aa_g_hash_policy, aabool, S_IRUSR | S_IWUSR); +#endif + /* Debug mode */ bool aa_g_debug; module_param_named(debug, aa_g_debug, aabool, S_IRUSR | S_IWUSR); ---

6 years, 8 months

4
10
0 0

[PATCH for-rc 0/4] IB/hfi1: Couple more for the RC cycle

by Dennis Dalessandro

Hi Doug and Jason, Mike and Ira have identified some fixes that they would like to see land in the RC, these are serious problems and are marked as stable. Changes since v1: Update Lukasz' email address and fix subject tag. --- Ira Weiny (1): IB/hfi1: Fix SL array bounds check Michael J. Ruhl (3): IB/hfi1: Invalid user input can result in crash IB/hfi1: Fix context recovery when PBC has an UnsupportedVL IB/hfi1: Fix destroy_qp hang after a link down drivers/infiniband/hw/hfi1/chip.c | 6 +++- drivers/infiniband/hw/hfi1/pio.c | 51 ++++++++++++++++++++++++++------ drivers/infiniband/hw/hfi1/pio.h | 2 + drivers/infiniband/hw/hfi1/user_sdma.c | 2 + drivers/infiniband/hw/hfi1/verbs.c | 8 ++++- 5 files changed, 56 insertions(+), 13 deletions(-) -- -Denny

6 years, 8 months

2
5
0 0

[PATCH v2 1/6] drm/dp_mst: Introduce drm_dp_mst_connector_atomic_check()

by Lyude Paul

Currently the way that we prevent userspace from performing new modesets on MST connectors that have just been destroyed is rather broken. There's nothing in the actual DRM DP MST topology helpers that checks whether or not a connector still exists, instead each DRM driver does this on it's own, usually by returning NULL from the best_encoder callback which in turn, causes the atomic commit to fail. However, this is wrong in a rather subtle way. If ->best_encoder() returns NULL, this makes ALL modesets involving the connector fail. This includes modesets from userspace that would shut off the CRTCs being used by the connector. Since this results in blocking any changes to a connector's DPMS prop, it has the sideaffect of preventing legacy modesetting users from ever disabling a CRTC that was previously enabled for use in an MST topology. An example of this, where X tries to change the DPMS property of an MST connector that was just detached from the system: [ 2908.320131] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] [ 2908.320148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] status updated from connected to disconnected [ 2908.320166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] disconnected [ 2908.320193] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 111 (1) [ 2908.320230] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event ... [ 2908.638539] [drm:drm_ioctl [drm]] pid=12928, dev=0xe201, auth=1, DRM_IOCTL_MODE_SETPROPERTY [ 2908.638546] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000007155ba49 [ 2908.638553] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (1) [ 2908.638560] [drm:drm_mode_object_get [drm]] OBJ ID: 108 (1) [ 2908.638568] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:head-0] 0000000097a6396e state to 000000007155ba49 [ 2908.638575] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:head-0] to 000000007155ba49 [ 2908.638582] [drm:drm_mode_object_get [drm]] OBJ ID: 82 (3) [ 2908.638589] [drm:drm_mode_object_get [drm]] OBJ ID: 82 (4) [ 2908.638596] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:82:DP-6] 0000000087427144 state to 000000007155ba49 [ 2908.638603] [drm:drm_atomic_check_only [drm]] checking 000000007155ba49 [ 2908.638609] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:41:head-0] active changed [ 2908.638613] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:82:DP-6] [ 2908.638616] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] No suitable encoder found for [CONNECTOR:82:DP-6] [ 2908.638623] [drm:drm_atomic_check_only [drm]] atomic driver check for 000000007155ba49 failed: -22 [ 2908.638630] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000007155ba49 [ 2908.638637] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (4) [ 2908.638643] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (3) [ 2908.638650] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 114 (2) [ 2908.638656] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 108 (2) [ 2908.638663] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000007155ba49 [ 2908.638669] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (2) [ 2908.638676] [drm:drm_ioctl [drm]] pid=12928, ret = -22 While this doesn't usually result in any errors that would be obvious to the user, it does result in us leaving display resources on. This in turn leads to unwanted sideaffects like inactive GPUs being left on (usually from the resulting leaked runtime PM ref). So, provide an easier way of doing this that doesn't require breaking ->best_encoder(): add a common drm_dp_mst_connector_atomic_check() function that DRM drivers can call in order to have CRTC enabling commits fail automatically if the MST port driving the connector no longer exists. We'll also be able to expand upon this later as well once we add MST fallback retraining support. Changes since v1: - Use list_for_each_entry_safe in drm_dp_mst_connector_still_exists() - Julia Lawall Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: Julia Lawall <julia.lawall(a)lip6.fr> Cc: stable(a)vger.kernel.org --- drivers/gpu/drm/drm_dp_mst_topology.c | 76 +++++++++++++++++++++++++++ include/drm/drm_dp_mst_helper.h | 3 ++ 2 files changed, 79 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 7780567aa669..58b9554711c7 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -3129,6 +3129,82 @@ static const struct drm_private_state_funcs mst_state_funcs = { .atomic_destroy_state = drm_dp_mst_destroy_state, }; +static bool +drm_dp_mst_connector_still_exists(struct drm_connector *connector, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_branch *mstb) +{ + struct drm_dp_mst_port *port, *tmp; + bool exists = false; + + mstb = drm_dp_get_validated_mstb_ref(mgr, mstb); + if (!mstb) + return false; + + list_for_each_entry_safe(port, tmp, &mstb->ports, next) { + port = drm_dp_get_validated_port_ref(mgr, port); + if (!port) + continue; + + exists = (port->connector == connector || + (port->mstb && + drm_dp_mst_connector_still_exists(connector, mgr, + port->mstb))); + + drm_dp_put_port(port); + if (exists) + break; + } + + drm_dp_put_mst_branch_device(mstb); + return exists; +} + +/** + * drm_dp_mst_connector_atomic_check - Helper for validating a new atomic + * state on an MST connector + * @connector: drm connector + * @connector_state: the new atomic state of @connector + * @mgr: the MST topology mgr for @connector + * + * This function performs various atomic checks that apply to all drivers + * using the DRM DP MST helpers. This should be called by all drivers at the + * start of the atomic_check function for their MST connectors. + * + * Return 0 for success, or negative error code on failure. + */ +int +drm_dp_mst_connector_atomic_check(struct drm_connector *connector, + struct drm_connector_state *connector_state, + struct drm_dp_mst_topology_mgr *mgr) +{ + struct drm_atomic_state *state = connector_state->state; + struct drm_crtc *crtc = connector_state->crtc; + struct drm_crtc_state *new_crtc_state; + + if (!crtc) + return 0; + + new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + if (!new_crtc_state) + return 0; + + if (!drm_atomic_crtc_needs_modeset(new_crtc_state) || + !new_crtc_state->active) + return 0; + + /* Make sure that the port for this MST connector still exists */ + if (!drm_dp_mst_connector_still_exists(connector, mgr, + mgr->mst_primary)) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has disappeared from the MST topology\n", + connector->base.id, connector->name); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_mst_connector_atomic_check); + /** * drm_atomic_get_mst_topology_state: get MST topology state * diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 7f78d26a0766..8e33c2c85d1e 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -625,6 +625,9 @@ void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr); +int drm_dp_mst_connector_atomic_check(struct drm_connector *connector, + struct drm_connector_state *connector_state, + struct drm_dp_mst_topology_mgr *mgr); int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, int pbn); -- 2.17.1

6 years, 8 months

2
1
0 0

[PATCH 1/6] drm/dp_mst: Introduce drm_dp_mst_connector_atomic_check()

by Lyude Paul

Currently the way that we prevent userspace from performing new modesets on MST connectors that have just been destroyed is rather broken. There's nothing in the actual DRM DP MST topology helpers that checks whether or not a connector still exists, instead each DRM driver does this on it's own, usually by returning NULL from the best_encoder callback which in turn, causes the atomic commit to fail. However, this is wrong in a rather subtle way. If ->best_encoder() returns NULL, this makes ALL modesets involving the connector fail. This includes modesets from userspace that would shut off the CRTCs being used by the connector. Since this results in blocking any changes to a connector's DPMS prop, it has the sideaffect of preventing legacy modesetting users from ever disabling a CRTC that was previously enabled for use in an MST topology. An example of this, where X tries to change the DPMS property of an MST connector that was just detached from the system: [ 2908.320131] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] [ 2908.320148] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] status updated from connected to disconnected [ 2908.320166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:82:DP-6] disconnected [ 2908.320193] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 111 (1) [ 2908.320230] [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event ... [ 2908.638539] [drm:drm_ioctl [drm]] pid=12928, dev=0xe201, auth=1, DRM_IOCTL_MODE_SETPROPERTY [ 2908.638546] [drm:drm_atomic_state_init [drm]] Allocated atomic state 000000007155ba49 [ 2908.638553] [drm:drm_mode_object_get [drm]] OBJ ID: 114 (1) [ 2908.638560] [drm:drm_mode_object_get [drm]] OBJ ID: 108 (1) [ 2908.638568] [drm:drm_atomic_get_crtc_state [drm]] Added [CRTC:41:head-0] 0000000097a6396e state to 000000007155ba49 [ 2908.638575] [drm:drm_atomic_add_affected_connectors [drm]] Adding all current connectors for [CRTC:41:head-0] to 000000007155ba49 [ 2908.638582] [drm:drm_mode_object_get [drm]] OBJ ID: 82 (3) [ 2908.638589] [drm:drm_mode_object_get [drm]] OBJ ID: 82 (4) [ 2908.638596] [drm:drm_atomic_get_connector_state [drm]] Added [CONNECTOR:82:DP-6] 0000000087427144 state to 000000007155ba49 [ 2908.638603] [drm:drm_atomic_check_only [drm]] checking 000000007155ba49 [ 2908.638609] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:41:head-0] active changed [ 2908.638613] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:82:DP-6] [ 2908.638616] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] No suitable encoder found for [CONNECTOR:82:DP-6] [ 2908.638623] [drm:drm_atomic_check_only [drm]] atomic driver check for 000000007155ba49 failed: -22 [ 2908.638630] [drm:drm_atomic_state_default_clear [drm]] Clearing atomic state 000000007155ba49 [ 2908.638637] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (4) [ 2908.638643] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (3) [ 2908.638650] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 114 (2) [ 2908.638656] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 108 (2) [ 2908.638663] [drm:__drm_atomic_state_free [drm]] Freeing atomic state 000000007155ba49 [ 2908.638669] [drm:drm_mode_object_put.part.2 [drm]] OBJ ID: 82 (2) [ 2908.638676] [drm:drm_ioctl [drm]] pid=12928, ret = -22 While this doesn't usually result in any errors that would be obvious to the user, it does result in us leaving display resources on. This in turn leads to unwanted sideaffects like inactive GPUs being left on (usually from the resulting leaked runtime PM ref). So, provide an easier way of doing this that doesn't require breaking ->best_encoder(): add a common drm_dp_mst_connector_atomic_check() function that DRM drivers can call in order to have CRTC enabling commits fail automatically if the MST port driving the connector no longer exists. We'll also be able to expand upon this later as well once we add MST fallback retraining support. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: stable(a)vger.kernel.org --- drivers/gpu/drm/drm_dp_mst_topology.c | 76 +++++++++++++++++++++++++++ include/drm/drm_dp_mst_helper.h | 3 ++ 2 files changed, 79 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 7780567aa669..0162d4bf2549 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -3129,6 +3129,82 @@ static const struct drm_private_state_funcs mst_state_funcs = { .atomic_destroy_state = drm_dp_mst_destroy_state, }; +static bool +drm_dp_mst_connector_still_exists(struct drm_connector *connector, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_branch *mstb) +{ + struct drm_dp_mst_port *port; + bool exists = false; + + mstb = drm_dp_get_validated_mstb_ref(mgr, mstb); + if (!mstb) + return false; + + list_for_each_entry(port, &mstb->ports, next) { + port = drm_dp_get_validated_port_ref(mgr, port); + if (!port) + continue; + + exists = (port->connector == connector || + (port->mstb && + drm_dp_mst_connector_still_exists(connector, mgr, + port->mstb))); + + drm_dp_put_port(port); + if (exists) + break; + } + + drm_dp_put_mst_branch_device(mstb); + return exists; +} + +/** + * drm_dp_mst_connector_atomic_check - Helper for validating a new atomic + * state on an MST connector + * @connector: drm connector + * @connector_state: the new atomic state of @connector + * @mgr: the MST topology mgr for @connector + * + * This function performs various atomic checks that apply to all drivers + * using the DRM DP MST helpers. This should be called by all drivers at the + * start of the atomic_check function for their MST connectors. + * + * Return 0 for success, or negative error code on failure. + */ +int +drm_dp_mst_connector_atomic_check(struct drm_connector *connector, + struct drm_connector_state *connector_state, + struct drm_dp_mst_topology_mgr *mgr) +{ + struct drm_atomic_state *state = connector_state->state; + struct drm_crtc *crtc = connector_state->crtc; + struct drm_crtc_state *new_crtc_state; + + if (!crtc) + return 0; + + new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + if (!new_crtc_state) + return 0; + + if (!drm_atomic_crtc_needs_modeset(new_crtc_state) || + !new_crtc_state->active) + return 0; + + /* Make sure that the port for this MST connector still exists */ + if (!drm_dp_mst_connector_still_exists(connector, mgr, + mgr->mst_primary)) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has disappeared from the MST topology\n", + connector->base.id, connector->name); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_mst_connector_atomic_check); + /** * drm_atomic_get_mst_topology_state: get MST topology state * diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 7f78d26a0766..8e33c2c85d1e 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -625,6 +625,9 @@ void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr); +int drm_dp_mst_connector_atomic_check(struct drm_connector *connector, + struct drm_connector_state *connector_state, + struct drm_dp_mst_topology_mgr *mgr); int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, int pbn); -- 2.17.1

6 years, 8 months

4
4
0 0

Re: [PATCH] nohz: Fix missing tick reprog while interrupting inline timer softirq

by Thomas Gleixner

On Thu, 20 Sep 2018, Evan Green wrote: > On Thu, Aug 30, 2018 at 7:29 AM Thomas Gleixner <tglx(a)linutronix.de> wrote: > > > > On Thu, 30 Aug 2018, John Crispin wrote: > > > > > > Sry, that disturbing you all, but what are the conclusion here for 4.14.y? > > > > - take Thomas's patch https://lore.kernel.org/patchwork/patch/969521/#1162900 > > > > - revert commit 2d898915ccf4838c04531c51a598469e921a5eb5 > > > > > > Hi Frederic, > > > > > > I reported this very issue to tglx last night and he asked me to verify his > > > proposed patch which i just did. I can confirm the the patch fixes the issue > > > on 4.14.67 and Greg should add it to the stable queue please. > > > > > > Tested-by: John Crispin <john(a)phrozen.org> > > > > Let me whip up a proper patch with changelog. > > > Hi Thomas, > Did this patch ever go anywhere? I believe it fixes the prints I'm > seeing in our kernel, and I wondered if the official patch was > somewhere. It's out there: https://lore.kernel.org/patchwork/patch/979451/ I assume that it has fallen through the stable cracks. Thanks, tglx

6 years, 8 months

2
1
0 0

[PATCH for-next 0/4] IB/hfi1: Couple more for the RC cycle

by Dennis Dalessandro

Hi Doug and Jason, Mike and Ira have identified some fixes that they would like to see land in the RC, these are serious problems and are marked as stable. --- Ira Weiny (1): IB/hfi1: Fix SL array bounds check Michael J. Ruhl (3): IB/hfi1: Invalid user input can result in crash IB/hfi1: Fix context recovery when PBC has an UnsupportedVL IB/hfi1: Fix destroy_qp hang after a link down drivers/infiniband/hw/hfi1/chip.c | 6 +++- drivers/infiniband/hw/hfi1/pio.c | 51 ++++++++++++++++++++++++++------ drivers/infiniband/hw/hfi1/pio.h | 2 + drivers/infiniband/hw/hfi1/user_sdma.c | 2 + drivers/infiniband/hw/hfi1/verbs.c | 8 ++++- 5 files changed, 56 insertions(+), 13 deletions(-) -- -Denny

6 years, 8 months

1
5
0 0

[patch 7/7] ocfs2: fix ocfs2 read block panic

by akpm＠linux-foundation.org

From: Junxiao Bi <junxiao.bi(a)oracle.com> Subject: ocfs2: fix ocfs2 read block panic While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Joseph Qi <jiangqi903(a)gmail.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Changwei Ge <ge.changwei(a)h3c.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN fs/ocfs2/buffer_head_io.c~ocfs2-fix-ocfs2-read-block-panic fs/ocfs2/buffer_head_io.c --- a/fs/ocfs2/buffer_head_io.c~ocfs2-fix-ocfs2-read-block-panic +++ a/fs/ocfs2/buffer_head_io.c @@ -342,6 +342,7 @@ int ocfs2_read_blocks(struct ocfs2_cachi * for this bh as it's not marked locally * uptodate. */ status = -EIO; + clear_buffer_needs_validate(bh); put_bh(bh); bhs[i] = NULL; continue; _

6 years, 8 months

1
0
0 0

[patch 4/7] mm: shmem.c: Correctly annotate new inodes for lockdep

by akpm＠linux-foundation.org

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> Subject: mm: shmem.c: Correctly annotate new inodes for lockdep Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> Reported-by: syzbot <syzkaller(a)googlegroups.com> Reviewed-by: NeilBrown <neilb(a)suse.com> Suggested-by: NeilBrown <neilb(a)suse.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Hugh Dickins <hughd(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/shmem.c~mm-shmem-correctly-annotate-new-inodes-for-lockdep mm/shmem.c --- a/mm/shmem.c~mm-shmem-correctly-annotate-new-inodes-for-lockdep +++ a/mm/shmem.c @@ -2227,6 +2227,8 @@ static struct inode *shmem_get_inode(str mpol_shared_policy_init(&info->policy, NULL); break; } + + lockdep_annotate_inode_mutex_key(inode); } else shmem_free_inode(sb); return inode; _

6 years, 8 months

1
0
0 0

[patch 2/7] mm: disable deferred struct page for 32-bit arches

by akpm＠linux-foundation.org

From: Pasha Tatashin <Pavel.Tatashin(a)microsoft.com> Subject: mm: disable deferred struct page for 32-bit arches Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin <pavel.tatashin(a)microsoft.com> Reported-by: Jiri Slaby <jslaby(a)suse.cz> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches mm/Kconfig --- a/mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches +++ a/mm/Kconfig @@ -637,6 +637,7 @@ config DEFERRED_STRUCT_PAGE_INIT depends on NO_BOOTMEM depends on SPARSEMEM depends on !NEED_PER_CPU_KM + depends on 64BIT help Ordinarily all struct pages are initialised during early boot in a single thread. On very large machines this can take a considerable _

6 years, 8 months

1
0
0 0

[patch 1/7] fork: report pid exhaustion correctly

by akpm＠linux-foundation.org

From: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Subject: fork: report pid exhaustion correctly Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: Gargi Sharma <gs051095(a)gmail.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN kernel/pid.c~fork-report-pid-exhaustion-correctly kernel/pid.c --- a/kernel/pid.c~fork-report-pid-exhaustion-correctly +++ a/kernel/pid.c @@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespa idr_preload_end(); if (nr < 0) { - retval = nr; + retval = (nr == -ENOSPC) ? -EAGAIN : nr; goto out_free; } _

6 years, 8 months

1
0
0 0

[patch 1/7] fork: report pid exhaustion correctly

by akpm＠linux-foundation.org

From: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Subject: fork: report pid exhaustion correctly Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: Gargi Sharma <gs051095(a)gmail.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN kernel/pid.c~fork-report-pid-exhaustion-correctly kernel/pid.c --- a/kernel/pid.c~fork-report-pid-exhaustion-correctly +++ a/kernel/pid.c @@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespa idr_preload_end(); if (nr < 0) { - retval = nr; + retval = (nr == -ENOSPC) ? -EAGAIN : nr; goto out_free; } _

6 years, 8 months

1
0
0 0

[patch 7/7] ocfs2: fix ocfs2 read block panic

by akpm＠linux-foundation.org

From: Junxiao Bi <junxiao.bi(a)oracle.com> Subject: ocfs2: fix ocfs2 read block panic While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[<ffffffffa05e9f09>] [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [<ffffffffa0609f52>] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [<ffffffffa05eca00>] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [<ffffffffa05ec0cb>] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [<ffffffffa05f0fbf>] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [<ffffffffa065660f>] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [<ffffffffa05f4f3a>] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [<ffffffffa05f442e>] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [<ffffffffa061b2f2>] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [<ffffffffa061c385>] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [<ffffffff8121714b>] vfs_create+0xdb/0x150 [203748.713518] [<ffffffff8121b225>] do_last+0x815/0x1210 [203748.713772] [<ffffffff812192e9>] ? path_init+0xb9/0x450 [203748.714123] [<ffffffff8121bca0>] path_openat+0x80/0x600 [203748.714378] [<ffffffff811bcd45>] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [<ffffffff8121d7ba>] do_filp_open+0x3a/0xb0 [203748.714888] [<ffffffff8122a767>] ? __alloc_fd+0xa7/0x130 [203748.715143] [<ffffffff81209ffc>] do_sys_open+0x12c/0x220 [203748.715403] [<ffffffff81026ddb>] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [<ffffffff816f0c9f>] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [<ffffffff8120a10e>] SyS_open+0x1e/0x20 [203748.716184] [<ffffffff816f0d5e>] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [<ffffffffa05e9f09>] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP <ffff88006ff4b818> Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Joseph Qi <jiangqi903(a)gmail.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Changwei Ge <ge.changwei(a)h3c.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN fs/ocfs2/buffer_head_io.c~ocfs2-fix-ocfs2-read-block-panic fs/ocfs2/buffer_head_io.c --- a/fs/ocfs2/buffer_head_io.c~ocfs2-fix-ocfs2-read-block-panic +++ a/fs/ocfs2/buffer_head_io.c @@ -342,6 +342,7 @@ int ocfs2_read_blocks(struct ocfs2_cachi * for this bh as it's not marked locally * uptodate. */ status = -EIO; + clear_buffer_needs_validate(bh); put_bh(bh); bhs[i] = NULL; continue; _

6 years, 8 months

1
0
0 0

[patch 4/7] mm: shmem.c: Correctly annotate new inodes for lockdep

by akpm＠linux-foundation.org

From: "Joel Fernandes (Google)" <joel(a)joelfernandes.org> Subject: mm: shmem.c: Correctly annotate new inodes for lockdep Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> Reported-by: syzbot <syzkaller(a)googlegroups.com> Reviewed-by: NeilBrown <neilb(a)suse.com> Suggested-by: NeilBrown <neilb(a)suse.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Hugh Dickins <hughd(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/shmem.c~mm-shmem-correctly-annotate-new-inodes-for-lockdep mm/shmem.c --- a/mm/shmem.c~mm-shmem-correctly-annotate-new-inodes-for-lockdep +++ a/mm/shmem.c @@ -2227,6 +2227,8 @@ static struct inode *shmem_get_inode(str mpol_shared_policy_init(&info->policy, NULL); break; } + + lockdep_annotate_inode_mutex_key(inode); } else shmem_free_inode(sb); return inode; _

6 years, 8 months

1
0
0 0

[patch 2/7] mm: disable deferred struct page for 32-bit arches

by akpm＠linux-foundation.org

From: Pasha Tatashin <Pavel.Tatashin(a)microsoft.com> Subject: mm: disable deferred struct page for 32-bit arches Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin <pavel.tatashin(a)microsoft.com> Reported-by: Jiri Slaby <jslaby(a)suse.cz> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches mm/Kconfig --- a/mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches +++ a/mm/Kconfig @@ -637,6 +637,7 @@ config DEFERRED_STRUCT_PAGE_INIT depends on NO_BOOTMEM depends on SPARSEMEM depends on !NEED_PER_CPU_KM + depends on 64BIT help Ordinarily all struct pages are initialised during early boot in a single thread. On very large machines this can take a considerable _

6 years, 8 months

1
0
0 0

[patch 1/7] fork: report pid exhaustion correctly

by akpm＠linux-foundation.org

From: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Subject: fork: report pid exhaustion correctly Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: Gargi Sharma <gs051095(a)gmail.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN kernel/pid.c~fork-report-pid-exhaustion-correctly kernel/pid.c --- a/kernel/pid.c~fork-report-pid-exhaustion-correctly +++ a/kernel/pid.c @@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespa idr_preload_end(); if (nr < 0) { - retval = nr; + retval = (nr == -ENOSPC) ? -EAGAIN : nr; goto out_free; } _

6 years, 8 months

1
0
0 0

Applied "regulator: fix crash caused by null driver data" to the regulator tree

by Mark Brown

The patch regulator: fix crash caused by null driver data has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From fb6de923ca3358a91525552b4907d4cb38730bdd Mon Sep 17 00:00:00 2001 From: Yu Zhao <yuzhao(a)google.com> Date: Wed, 19 Sep 2018 15:30:51 -0600 Subject: [PATCH] regulator: fix crash caused by null driver data dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao <yuzhao(a)google.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 90215f57270f..9577d8941846 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4395,13 +4395,13 @@ regulator_register(const struct regulator_desc *regulator_desc, !rdev->desc->fixed_uV) rdev->is_switch = true; + dev_set_drvdata(&rdev->dev, rdev); ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); goto unset_supplies; } - dev_set_drvdata(&rdev->dev, rdev); rdev_init_debugfs(rdev); /* try to resolve regulators supply since a new one was registered */ -- 2.19.0

6 years, 8 months

1
0
0 0

[PATCH] xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code

by Boris Ostrovsky

Otherwise we may leak kernel stack for events that sample user registers. Reported-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Cc: stable(a)vger.kernel.org --- arch/x86/xen/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c index 7d00d4a..95997e6 100644 --- a/arch/x86/xen/pmu.c +++ b/arch/x86/xen/pmu.c @@ -478,7 +478,7 @@ static void xen_convert_regs(const struct xen_pmu_regs *xen_regs, irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id) { int err, ret = IRQ_NONE; - struct pt_regs regs; + struct pt_regs regs = {0}; const struct xen_pmu_data *xenpmu_data = get_xenpmu_data(); uint8_t xenpmu_flags = get_xenpmu_flags(); -- 1.8.3.1

6 years, 8 months

2
2
0 0

[PATCH v2 3/3] usb: typec: pci: Enable Intel USB role mux on Apollo Lake platforms

by Mathias Nyman

From: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: <stable(a)vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 722860e..51dd8e0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -179,10 +179,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) xhci->quirks |= XHCI_SSIC_PORT_UNUSED; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) xhci->quirks |= XHCI_INTEL_USB_ROLE_SW; - } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || -- 2.7.4

6 years, 8 months

1
0
0 0

[PATCH v2 2/3] usb: xhci-mtk: resume USB3 roothub first

by Mathias Nyman

From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Give USB3 devices a better chance to enumerate at USB3 speeds if they are connected to a suspended host. Porting from "671ffdff5b13 xhci: resume USB 3 roothub first" Cc: <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-mtk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 7334da9..71d0d33 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -642,10 +642,10 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev) xhci_mtk_host_enable(mtk); xhci_dbg(xhci, "%s: restart port polling\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return 0; } -- 2.7.4

6 years, 8 months

1
0
0 0

[PATCH v2 1/3] xhci: Add missing CAS workaround for Intel Sunrise Point xHCI

by Mathias Nyman

The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: <stable(a)vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 6372edf..722860e 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -185,6 +185,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) xhci->quirks |= XHCI_MISSING_CAS; -- 2.7.4

6 years, 8 months

1
0
0 0

v4.4.157 build: 0 failures 31 warnings (v4.4.157)

by Build bot for Mark Brown

Tree/Branch: v4.4.157 Git describe: v4.4.157 Commit: d956091968 Linux 4.4.157 Build Time: 68 min 54 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 31 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 19 warnings 0 mismatches : arm64-allmodconfig 17 warnings 0 mismatches : x86_64-allmodconfig ------------------------------------------------------------------------------- Warnings Summary: 31 3 warning: (IMA) selects TCG_CRB which has unmet direct dependencies (TCG_TPM && X86 && ACPI) 2 ../drivers/media/dvb-frontends/stv090x.c:4250:1: warning: the frame size of 4832 bytes is larger than 2048 bytes [-Wframe-larger-than=] 2 ../drivers/media/dvb-frontends/stv090x.c:1211:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 2 ../drivers/media/dvb-frontends/stv090x.c:1168:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2752 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2720 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4759:1: warning: the frame size of 2056 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 6784 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5864 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5840 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2304 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2288 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2104 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2552 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3248 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 3008 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 2992 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5296 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv0367.c:3147:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/stv0367.c:2490:1: warning: the frame size of 3424 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2984 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2976 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4336 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4328 bytes is larger than 2048 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: warning: (IMA) selects TCG_CRB which has unmet direct dependencies (TCG_TPM && X86 && ACPI) warning: (IMA) selects TCG_CRB which has unmet direct dependencies (TCG_TPM && X86 && ACPI) warning: (IMA) selects TCG_CRB which has unmet direct dependencies (TCG_TPM && X86 && ACPI) ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 2992 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2288 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3248 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1211:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4250:1: warning: the frame size of 4832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1168:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5840 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 6784 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv0367.c:2490:1: warning: the frame size of 3424 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2976 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4336 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2720 bytes is larger than 2048 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- x86_64-allmodconfig : PASS, 0 errors, 17 warnings, 0 section mismatches Warnings: ../drivers/media/dvb-frontends/stv090x.c:1858:1: warning: the frame size of 3008 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2141:1: warning: the frame size of 2104 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2513:1: warning: the frame size of 2304 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4565:1: warning: the frame size of 2096 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1956:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1599:1: warning: the frame size of 5296 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1211:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4250:1: warning: the frame size of 4832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:4759:1: warning: the frame size of 2056 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:1168:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:2073:1: warning: the frame size of 2552 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3095:1: warning: the frame size of 5864 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv090x.c:3436:1: warning: the frame size of 5280 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/stv0367.c:3147:1: warning: the frame size of 4144 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2401:1: warning: the frame size of 2984 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/media/dvb-frontends/cxd2841er.c:2282:1: warning: the frame size of 4328 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/net/ethernet/rocker/rocker.c:2172:1: warning: the frame size of 2752 bytes is larger than 2048 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig

6 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2018