September 2018 - Linux-stable-mirror

+ fork-report-pid-exhaustion-correctly.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: fork: report pid exhaustion correctly has been added to the -mm tree. Its filename is fork-report-pid-exhaustion-correctly.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/fork-report-pid-exhaustion-correct… and later at http://ozlabs.org/~akpm/mmotm/broken-out/fork-report-pid-exhaustion-correct… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Subject: fork: report pid exhaustion correctly Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis <ktsanaktsidis(a)zendesk.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.cz> Cc: Gargi Sharma <gs051095(a)gmail.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN kernel/pid.c~fork-report-pid-exhaustion-correctly kernel/pid.c --- a/kernel/pid.c~fork-report-pid-exhaustion-correctly +++ a/kernel/pid.c @@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespa idr_preload_end(); if (nr < 0) { - retval = nr; + retval = (nr == -ENOSPC) ? -EAGAIN : nr; goto out_free; } _ Patches currently in -mm which might be from ktsanaktsidis(a)zendesk.com are fork-report-pid-exhaustion-correctly.patch

6 years, 8 months

2
1
0 0

[PATCH] crypto: remove speck

by Jason A. Donenfeld

These are unused, undesired, and have never actually been used by anybody. The original authors of this code have changed their mind about its inclusion. Therefore, this patch removes it. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Cc: stable(a)vger.kernel.org --- Documentation/filesystems/fscrypt.rst | 10 - arch/arm/crypto/Kconfig | 6 - arch/arm/crypto/Makefile | 2 - arch/arm/crypto/speck-neon-core.S | 434 --------------- arch/arm/crypto/speck-neon-glue.c | 288 ---------- arch/arm64/crypto/Kconfig | 6 - arch/arm64/crypto/Makefile | 3 - arch/arm64/crypto/speck-neon-core.S | 352 ------------ arch/arm64/crypto/speck-neon-glue.c | 282 ---------- arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/s390/defconfig | 1 - crypto/Kconfig | 14 - crypto/Makefile | 1 - crypto/speck.c | 307 ----------- crypto/testmgr.c | 24 - crypto/testmgr.h | 738 -------------------------- fs/crypto/fscrypt_private.h | 4 - fs/crypto/keyinfo.c | 10 - include/crypto/speck.h | 62 --- include/uapi/linux/fs.h | 2 - 31 files changed, 2558 deletions(-) delete mode 100644 arch/arm/crypto/speck-neon-core.S delete mode 100644 arch/arm/crypto/speck-neon-glue.c delete mode 100644 arch/arm64/crypto/speck-neon-core.S delete mode 100644 arch/arm64/crypto/speck-neon-glue.c delete mode 100644 crypto/speck.c delete mode 100644 include/crypto/speck.h diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 48b424de85bb..cfbc18f0d9c9 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -191,21 +191,11 @@ Currently, the following pairs of encryption modes are supported: - AES-256-XTS for contents and AES-256-CTS-CBC for filenames - AES-128-CBC for contents and AES-128-CTS-CBC for filenames -- Speck128/256-XTS for contents and Speck128/256-CTS-CBC for filenames It is strongly recommended to use AES-256-XTS for contents encryption. AES-128-CBC was added only for low-powered embedded devices with crypto accelerators such as CAAM or CESA that do not support XTS. -Similarly, Speck128/256 support was only added for older or low-end -CPUs which cannot do AES fast enough -- especially ARM CPUs which have -NEON instructions but not the Cryptography Extensions -- and for which -it would not otherwise be feasible to use encryption at all. It is -not recommended to use Speck on CPUs that have AES instructions. -Speck support is only available if it has been enabled in the crypto -API via CONFIG_CRYPTO_SPECK. Also, on ARM platforms, to get -acceptable performance CONFIG_CRYPTO_SPECK_NEON must be enabled. - New encryption modes can be added relatively easily, without changes to individual filesystems. However, authenticated encryption (AE) modes are not currently supported because of the difficulty of dealing diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 925d1364727a..b8e69fe282b8 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -121,10 +121,4 @@ config CRYPTO_CHACHA20_NEON select CRYPTO_BLKCIPHER select CRYPTO_CHACHA20 -config CRYPTO_SPECK_NEON - tristate "NEON accelerated Speck cipher algorithms" - depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER - select CRYPTO_SPECK - endif diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 8de542c48ade..bd5bceef0605 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o -obj-$(CONFIG_CRYPTO_SPECK_NEON) += speck-neon.o ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o @@ -54,7 +53,6 @@ ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o crct10dif-arm-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o -speck-neon-y := speck-neon-core.o speck-neon-glue.o ifdef REGENERATE_ARM_CRYPTO quiet_cmd_perl = PERL $@ diff --git a/arch/arm/crypto/speck-neon-core.S b/arch/arm/crypto/speck-neon-core.S deleted file mode 100644 index 57caa742016e..000000000000 --- a/arch/arm/crypto/speck-neon-core.S +++ /dev/null @@ -1,434 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * - * Copyright (c) 2018 Google, Inc - * - * Author: Eric Biggers <ebiggers(a)google.com> - */ - -#include <linux/linkage.h> - - .text - .fpu neon - - // arguments - ROUND_KEYS .req r0 // const {u64,u32} *round_keys - NROUNDS .req r1 // int nrounds - DST .req r2 // void *dst - SRC .req r3 // const void *src - NBYTES .req r4 // unsigned int nbytes - TWEAK .req r5 // void *tweak - - // registers which hold the data being encrypted/decrypted - X0 .req q0 - X0_L .req d0 - X0_H .req d1 - Y0 .req q1 - Y0_H .req d3 - X1 .req q2 - X1_L .req d4 - X1_H .req d5 - Y1 .req q3 - Y1_H .req d7 - X2 .req q4 - X2_L .req d8 - X2_H .req d9 - Y2 .req q5 - Y2_H .req d11 - X3 .req q6 - X3_L .req d12 - X3_H .req d13 - Y3 .req q7 - Y3_H .req d15 - - // the round key, duplicated in all lanes - ROUND_KEY .req q8 - ROUND_KEY_L .req d16 - ROUND_KEY_H .req d17 - - // index vector for vtbl-based 8-bit rotates - ROTATE_TABLE .req d18 - - // multiplication table for updating XTS tweaks - GF128MUL_TABLE .req d19 - GF64MUL_TABLE .req d19 - - // current XTS tweak value(s) - TWEAKV .req q10 - TWEAKV_L .req d20 - TWEAKV_H .req d21 - - TMP0 .req q12 - TMP0_L .req d24 - TMP0_H .req d25 - TMP1 .req q13 - TMP2 .req q14 - TMP3 .req q15 - - .align 4 -.Lror64_8_table: - .byte 1, 2, 3, 4, 5, 6, 7, 0 -.Lror32_8_table: - .byte 1, 2, 3, 0, 5, 6, 7, 4 -.Lrol64_8_table: - .byte 7, 0, 1, 2, 3, 4, 5, 6 -.Lrol32_8_table: - .byte 3, 0, 1, 2, 7, 4, 5, 6 -.Lgf128mul_table: - .byte 0, 0x87 - .fill 14 -.Lgf64mul_table: - .byte 0, 0x1b, (0x1b << 1), (0x1b << 1) ^ 0x1b - .fill 12 - -/* - * _speck_round_128bytes() - Speck encryption round on 128 bytes at a time - * - * Do one Speck encryption round on the 128 bytes (8 blocks for Speck128, 16 for - * Speck64) stored in X0-X3 and Y0-Y3, using the round key stored in all lanes - * of ROUND_KEY. 'n' is the lane size: 64 for Speck128, or 32 for Speck64. - * - * The 8-bit rotates are implemented using vtbl instead of vshr + vsli because - * the vtbl approach is faster on some processors and the same speed on others. - */ -.macro _speck_round_128bytes n - - // x = ror(x, 8) - vtbl.8 X0_L, {X0_L}, ROTATE_TABLE - vtbl.8 X0_H, {X0_H}, ROTATE_TABLE - vtbl.8 X1_L, {X1_L}, ROTATE_TABLE - vtbl.8 X1_H, {X1_H}, ROTATE_TABLE - vtbl.8 X2_L, {X2_L}, ROTATE_TABLE - vtbl.8 X2_H, {X2_H}, ROTATE_TABLE - vtbl.8 X3_L, {X3_L}, ROTATE_TABLE - vtbl.8 X3_H, {X3_H}, ROTATE_TABLE - - // x += y - vadd.u\n X0, Y0 - vadd.u\n X1, Y1 - vadd.u\n X2, Y2 - vadd.u\n X3, Y3 - - // x ^= k - veor X0, ROUND_KEY - veor X1, ROUND_KEY - veor X2, ROUND_KEY - veor X3, ROUND_KEY - - // y = rol(y, 3) - vshl.u\n TMP0, Y0, #3 - vshl.u\n TMP1, Y1, #3 - vshl.u\n TMP2, Y2, #3 - vshl.u\n TMP3, Y3, #3 - vsri.u\n TMP0, Y0, #(\n - 3) - vsri.u\n TMP1, Y1, #(\n - 3) - vsri.u\n TMP2, Y2, #(\n - 3) - vsri.u\n TMP3, Y3, #(\n - 3) - - // y ^= x - veor Y0, TMP0, X0 - veor Y1, TMP1, X1 - veor Y2, TMP2, X2 - veor Y3, TMP3, X3 -.endm - -/* - * _speck_unround_128bytes() - Speck decryption round on 128 bytes at a time - * - * This is the inverse of _speck_round_128bytes(). - */ -.macro _speck_unround_128bytes n - - // y ^= x - veor TMP0, Y0, X0 - veor TMP1, Y1, X1 - veor TMP2, Y2, X2 - veor TMP3, Y3, X3 - - // y = ror(y, 3) - vshr.u\n Y0, TMP0, #3 - vshr.u\n Y1, TMP1, #3 - vshr.u\n Y2, TMP2, #3 - vshr.u\n Y3, TMP3, #3 - vsli.u\n Y0, TMP0, #(\n - 3) - vsli.u\n Y1, TMP1, #(\n - 3) - vsli.u\n Y2, TMP2, #(\n - 3) - vsli.u\n Y3, TMP3, #(\n - 3) - - // x ^= k - veor X0, ROUND_KEY - veor X1, ROUND_KEY - veor X2, ROUND_KEY - veor X3, ROUND_KEY - - // x -= y - vsub.u\n X0, Y0 - vsub.u\n X1, Y1 - vsub.u\n X2, Y2 - vsub.u\n X3, Y3 - - // x = rol(x, 8); - vtbl.8 X0_L, {X0_L}, ROTATE_TABLE - vtbl.8 X0_H, {X0_H}, ROTATE_TABLE - vtbl.8 X1_L, {X1_L}, ROTATE_TABLE - vtbl.8 X1_H, {X1_H}, ROTATE_TABLE - vtbl.8 X2_L, {X2_L}, ROTATE_TABLE - vtbl.8 X2_H, {X2_H}, ROTATE_TABLE - vtbl.8 X3_L, {X3_L}, ROTATE_TABLE - vtbl.8 X3_H, {X3_H}, ROTATE_TABLE -.endm - -.macro _xts128_precrypt_one dst_reg, tweak_buf, tmp - - // Load the next source block - vld1.8 {\dst_reg}, [SRC]! - - // Save the current tweak in the tweak buffer - vst1.8 {TWEAKV}, [\tweak_buf:128]! - - // XOR the next source block with the current tweak - veor \dst_reg, TWEAKV - - /* - * Calculate the next tweak by multiplying the current one by x, - * modulo p(x) = x^128 + x^7 + x^2 + x + 1. - */ - vshr.u64 \tmp, TWEAKV, #63 - vshl.u64 TWEAKV, #1 - veor TWEAKV_H, \tmp\()_L - vtbl.8 \tmp\()_H, {GF128MUL_TABLE}, \tmp\()_H - veor TWEAKV_L, \tmp\()_H -.endm - -.macro _xts64_precrypt_two dst_reg, tweak_buf, tmp - - // Load the next two source blocks - vld1.8 {\dst_reg}, [SRC]! - - // Save the current two tweaks in the tweak buffer - vst1.8 {TWEAKV}, [\tweak_buf:128]! - - // XOR the next two source blocks with the current two tweaks - veor \dst_reg, TWEAKV - - /* - * Calculate the next two tweaks by multiplying the current ones by x^2, - * modulo p(x) = x^64 + x^4 + x^3 + x + 1. - */ - vshr.u64 \tmp, TWEAKV, #62 - vshl.u64 TWEAKV, #2 - vtbl.8 \tmp\()_L, {GF64MUL_TABLE}, \tmp\()_L - vtbl.8 \tmp\()_H, {GF64MUL_TABLE}, \tmp\()_H - veor TWEAKV, \tmp -.endm - -/* - * _speck_xts_crypt() - Speck-XTS encryption/decryption - * - * Encrypt or decrypt NBYTES bytes of data from the SRC buffer to the DST buffer - * using Speck-XTS, specifically the variant with a block size of '2n' and round - * count given by NROUNDS. The expanded round keys are given in ROUND_KEYS, and - * the current XTS tweak value is given in TWEAK. It's assumed that NBYTES is a - * nonzero multiple of 128. - */ -.macro _speck_xts_crypt n, decrypting - push {r4-r7} - mov r7, sp - - /* - * The first four parameters were passed in registers r0-r3. Load the - * additional parameters, which were passed on the stack. - */ - ldr NBYTES, [sp, #16] - ldr TWEAK, [sp, #20] - - /* - * If decrypting, modify the ROUND_KEYS parameter to point to the last - * round key rather than the first, since for decryption the round keys - * are used in reverse order. - */ -.if \decrypting -.if \n == 64 - add ROUND_KEYS, ROUND_KEYS, NROUNDS, lsl #3 - sub ROUND_KEYS, #8 -.else - add ROUND_KEYS, ROUND_KEYS, NROUNDS, lsl #2 - sub ROUND_KEYS, #4 -.endif -.endif - - // Load the index vector for vtbl-based 8-bit rotates -.if \decrypting - ldr r12, =.Lrol\n\()_8_table -.else - ldr r12, =.Lror\n\()_8_table -.endif - vld1.8 {ROTATE_TABLE}, [r12:64] - - // One-time XTS preparation - - /* - * Allocate stack space to store 128 bytes worth of tweaks. For - * performance, this space is aligned to a 16-byte boundary so that we - * can use the load/store instructions that declare 16-byte alignment. - * For Thumb2 compatibility, don't do the 'bic' directly on 'sp'. - */ - sub r12, sp, #128 - bic r12, #0xf - mov sp, r12 - -.if \n == 64 - // Load first tweak - vld1.8 {TWEAKV}, [TWEAK] - - // Load GF(2^128) multiplication table - ldr r12, =.Lgf128mul_table - vld1.8 {GF128MUL_TABLE}, [r12:64] -.else - // Load first tweak - vld1.8 {TWEAKV_L}, [TWEAK] - - // Load GF(2^64) multiplication table - ldr r12, =.Lgf64mul_table - vld1.8 {GF64MUL_TABLE}, [r12:64] - - // Calculate second tweak, packing it together with the first - vshr.u64 TMP0_L, TWEAKV_L, #63 - vtbl.u8 TMP0_L, {GF64MUL_TABLE}, TMP0_L - vshl.u64 TWEAKV_H, TWEAKV_L, #1 - veor TWEAKV_H, TMP0_L -.endif - -.Lnext_128bytes_\@: - - /* - * Load the source blocks into {X,Y}[0-3], XOR them with their XTS tweak - * values, and save the tweaks on the stack for later. Then - * de-interleave the 'x' and 'y' elements of each block, i.e. make it so - * that the X[0-3] registers contain only the second halves of blocks, - * and the Y[0-3] registers contain only the first halves of blocks. - * (Speck uses the order (y, x) rather than the more intuitive (x, y).) - */ - mov r12, sp -.if \n == 64 - _xts128_precrypt_one X0, r12, TMP0 - _xts128_precrypt_one Y0, r12, TMP0 - _xts128_precrypt_one X1, r12, TMP0 - _xts128_precrypt_one Y1, r12, TMP0 - _xts128_precrypt_one X2, r12, TMP0 - _xts128_precrypt_one Y2, r12, TMP0 - _xts128_precrypt_one X3, r12, TMP0 - _xts128_precrypt_one Y3, r12, TMP0 - vswp X0_L, Y0_H - vswp X1_L, Y1_H - vswp X2_L, Y2_H - vswp X3_L, Y3_H -.else - _xts64_precrypt_two X0, r12, TMP0 - _xts64_precrypt_two Y0, r12, TMP0 - _xts64_precrypt_two X1, r12, TMP0 - _xts64_precrypt_two Y1, r12, TMP0 - _xts64_precrypt_two X2, r12, TMP0 - _xts64_precrypt_two Y2, r12, TMP0 - _xts64_precrypt_two X3, r12, TMP0 - _xts64_precrypt_two Y3, r12, TMP0 - vuzp.32 Y0, X0 - vuzp.32 Y1, X1 - vuzp.32 Y2, X2 - vuzp.32 Y3, X3 -.endif - - // Do the cipher rounds - - mov r12, ROUND_KEYS - mov r6, NROUNDS - -.Lnext_round_\@: -.if \decrypting -.if \n == 64 - vld1.64 ROUND_KEY_L, [r12] - sub r12, #8 - vmov ROUND_KEY_H, ROUND_KEY_L -.else - vld1.32 {ROUND_KEY_L[],ROUND_KEY_H[]}, [r12] - sub r12, #4 -.endif - _speck_unround_128bytes \n -.else -.if \n == 64 - vld1.64 ROUND_KEY_L, [r12]! - vmov ROUND_KEY_H, ROUND_KEY_L -.else - vld1.32 {ROUND_KEY_L[],ROUND_KEY_H[]}, [r12]! -.endif - _speck_round_128bytes \n -.endif - subs r6, r6, #1 - bne .Lnext_round_\@ - - // Re-interleave the 'x' and 'y' elements of each block -.if \n == 64 - vswp X0_L, Y0_H - vswp X1_L, Y1_H - vswp X2_L, Y2_H - vswp X3_L, Y3_H -.else - vzip.32 Y0, X0 - vzip.32 Y1, X1 - vzip.32 Y2, X2 - vzip.32 Y3, X3 -.endif - - // XOR the encrypted/decrypted blocks with the tweaks we saved earlier - mov r12, sp - vld1.8 {TMP0, TMP1}, [r12:128]! - vld1.8 {TMP2, TMP3}, [r12:128]! - veor X0, TMP0 - veor Y0, TMP1 - veor X1, TMP2 - veor Y1, TMP3 - vld1.8 {TMP0, TMP1}, [r12:128]! - vld1.8 {TMP2, TMP3}, [r12:128]! - veor X2, TMP0 - veor Y2, TMP1 - veor X3, TMP2 - veor Y3, TMP3 - - // Store the ciphertext in the destination buffer - vst1.8 {X0, Y0}, [DST]! - vst1.8 {X1, Y1}, [DST]! - vst1.8 {X2, Y2}, [DST]! - vst1.8 {X3, Y3}, [DST]! - - // Continue if there are more 128-byte chunks remaining, else return - subs NBYTES, #128 - bne .Lnext_128bytes_\@ - - // Store the next tweak -.if \n == 64 - vst1.8 {TWEAKV}, [TWEAK] -.else - vst1.8 {TWEAKV_L}, [TWEAK] -.endif - - mov sp, r7 - pop {r4-r7} - bx lr -.endm - -ENTRY(speck128_xts_encrypt_neon) - _speck_xts_crypt n=64, decrypting=0 -ENDPROC(speck128_xts_encrypt_neon) - -ENTRY(speck128_xts_decrypt_neon) - _speck_xts_crypt n=64, decrypting=1 -ENDPROC(speck128_xts_decrypt_neon) - -ENTRY(speck64_xts_encrypt_neon) - _speck_xts_crypt n=32, decrypting=0 -ENDPROC(speck64_xts_encrypt_neon) - -ENTRY(speck64_xts_decrypt_neon) - _speck_xts_crypt n=32, decrypting=1 -ENDPROC(speck64_xts_decrypt_neon) diff --git a/arch/arm/crypto/speck-neon-glue.c b/arch/arm/crypto/speck-neon-glue.c deleted file mode 100644 index f012c3ea998f..000000000000 --- a/arch/arm/crypto/speck-neon-glue.c +++ /dev/null @@ -1,288 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * - * Copyright (c) 2018 Google, Inc - * - * Note: the NIST recommendation for XTS only specifies a 128-bit block size, - * but a 64-bit version (needed for Speck64) is fairly straightforward; the math - * is just done in GF(2^64) instead of GF(2^128), with the reducing polynomial - * x^64 + x^4 + x^3 + x + 1 from the original XEX paper (Rogaway, 2004: - * "Efficient Instantiations of Tweakable Blockciphers and Refinements to Modes - * OCB and PMAC"), represented as 0x1B. - */ - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> -#include <crypto/algapi.h> -#include <crypto/gf128mul.h> -#include <crypto/internal/skcipher.h> -#include <crypto/speck.h> -#include <crypto/xts.h> -#include <linux/kernel.h> -#include <linux/module.h> - -/* The assembly functions only handle multiples of 128 bytes */ -#define SPECK_NEON_CHUNK_SIZE 128 - -/* Speck128 */ - -struct speck128_xts_tfm_ctx { - struct speck128_tfm_ctx main_key; - struct speck128_tfm_ctx tweak_key; -}; - -asmlinkage void speck128_xts_encrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck128_xts_decrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck128_crypt_one_t)(const struct speck128_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck128_xts_crypt_many_t)(const u64 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck128_xts_crypt(struct skcipher_request *req, - speck128_crypt_one_t crypt_one, - speck128_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - le128 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck128_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - le128_xor((le128 *)dst, (const le128 *)src, &tweak); - (*crypt_one)(&ctx->main_key, dst, dst); - le128_xor((le128 *)dst, (const le128 *)dst, &tweak); - gf128mul_x_ble(&tweak, &tweak); - - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck128_xts_encrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_encrypt, - speck128_xts_encrypt_neon); -} - -static int speck128_xts_decrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_decrypt, - speck128_xts_decrypt_neon); -} - -static int speck128_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck128_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck128_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -/* Speck64 */ - -struct speck64_xts_tfm_ctx { - struct speck64_tfm_ctx main_key; - struct speck64_tfm_ctx tweak_key; -}; - -asmlinkage void speck64_xts_encrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck64_xts_decrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck64_crypt_one_t)(const struct speck64_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck64_xts_crypt_many_t)(const u32 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck64_xts_crypt(struct skcipher_request *req, speck64_crypt_one_t crypt_one, - speck64_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - __le64 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck64_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - *(__le64 *)dst = *(__le64 *)src ^ tweak; - (*crypt_one)(&ctx->main_key, dst, dst); - *(__le64 *)dst ^= tweak; - tweak = cpu_to_le64((le64_to_cpu(tweak) << 1) ^ - ((tweak & cpu_to_le64(1ULL << 63)) ? - 0x1B : 0)); - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck64_xts_encrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_encrypt, - speck64_xts_encrypt_neon); -} - -static int speck64_xts_decrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_decrypt, - speck64_xts_decrypt_neon); -} - -static int speck64_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck64_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck64_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -static struct skcipher_alg speck_algs[] = { - { - .base.cra_name = "xts(speck128)", - .base.cra_driver_name = "xts-speck128-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK128_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck128_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK128_128_KEY_SIZE, - .max_keysize = 2 * SPECK128_256_KEY_SIZE, - .ivsize = SPECK128_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck128_xts_setkey, - .encrypt = speck128_xts_encrypt, - .decrypt = speck128_xts_decrypt, - }, { - .base.cra_name = "xts(speck64)", - .base.cra_driver_name = "xts-speck64-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK64_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck64_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK64_96_KEY_SIZE, - .max_keysize = 2 * SPECK64_128_KEY_SIZE, - .ivsize = SPECK64_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck64_xts_setkey, - .encrypt = speck64_xts_encrypt, - .decrypt = speck64_xts_decrypt, - } -}; - -static int __init speck_neon_module_init(void) -{ - if (!(elf_hwcap & HWCAP_NEON)) - return -ENODEV; - return crypto_register_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -static void __exit speck_neon_module_exit(void) -{ - crypto_unregister_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -module_init(speck_neon_module_init); -module_exit(speck_neon_module_exit); - -MODULE_DESCRIPTION("Speck block cipher (NEON-accelerated)"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Biggers <ebiggers(a)google.com>"); -MODULE_ALIAS_CRYPTO("xts(speck128)"); -MODULE_ALIAS_CRYPTO("xts-speck128-neon"); -MODULE_ALIAS_CRYPTO("xts(speck64)"); -MODULE_ALIAS_CRYPTO("xts-speck64-neon"); diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index e3fdb0fd6f70..d51944ff9f91 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -119,10 +119,4 @@ config CRYPTO_AES_ARM64_BS select CRYPTO_AES_ARM64 select CRYPTO_SIMD -config CRYPTO_SPECK_NEON - tristate "NEON accelerated Speck cipher algorithms" - depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER - select CRYPTO_SPECK - endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index bcafd016618e..7bc4bda6d9c6 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -56,9 +56,6 @@ sha512-arm64-y := sha512-glue.o sha512-core.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha20-neon.o chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o -obj-$(CONFIG_CRYPTO_SPECK_NEON) += speck-neon.o -speck-neon-y := speck-neon-core.o speck-neon-glue.o - obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o diff --git a/arch/arm64/crypto/speck-neon-core.S b/arch/arm64/crypto/speck-neon-core.S deleted file mode 100644 index b14463438b09..000000000000 --- a/arch/arm64/crypto/speck-neon-core.S +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM64 NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * - * Copyright (c) 2018 Google, Inc - * - * Author: Eric Biggers <ebiggers(a)google.com> - */ - -#include <linux/linkage.h> - - .text - - // arguments - ROUND_KEYS .req x0 // const {u64,u32} *round_keys - NROUNDS .req w1 // int nrounds - NROUNDS_X .req x1 - DST .req x2 // void *dst - SRC .req x3 // const void *src - NBYTES .req w4 // unsigned int nbytes - TWEAK .req x5 // void *tweak - - // registers which hold the data being encrypted/decrypted - // (underscores avoid a naming collision with ARM64 registers x0-x3) - X_0 .req v0 - Y_0 .req v1 - X_1 .req v2 - Y_1 .req v3 - X_2 .req v4 - Y_2 .req v5 - X_3 .req v6 - Y_3 .req v7 - - // the round key, duplicated in all lanes - ROUND_KEY .req v8 - - // index vector for tbl-based 8-bit rotates - ROTATE_TABLE .req v9 - ROTATE_TABLE_Q .req q9 - - // temporary registers - TMP0 .req v10 - TMP1 .req v11 - TMP2 .req v12 - TMP3 .req v13 - - // multiplication table for updating XTS tweaks - GFMUL_TABLE .req v14 - GFMUL_TABLE_Q .req q14 - - // next XTS tweak value(s) - TWEAKV_NEXT .req v15 - - // XTS tweaks for the blocks currently being encrypted/decrypted - TWEAKV0 .req v16 - TWEAKV1 .req v17 - TWEAKV2 .req v18 - TWEAKV3 .req v19 - TWEAKV4 .req v20 - TWEAKV5 .req v21 - TWEAKV6 .req v22 - TWEAKV7 .req v23 - - .align 4 -.Lror64_8_table: - .octa 0x080f0e0d0c0b0a090007060504030201 -.Lror32_8_table: - .octa 0x0c0f0e0d080b0a090407060500030201 -.Lrol64_8_table: - .octa 0x0e0d0c0b0a09080f0605040302010007 -.Lrol32_8_table: - .octa 0x0e0d0c0f0a09080b0605040702010003 -.Lgf128mul_table: - .octa 0x00000000000000870000000000000001 -.Lgf64mul_table: - .octa 0x0000000000000000000000002d361b00 - -/* - * _speck_round_128bytes() - Speck encryption round on 128 bytes at a time - * - * Do one Speck encryption round on the 128 bytes (8 blocks for Speck128, 16 for - * Speck64) stored in X0-X3 and Y0-Y3, using the round key stored in all lanes - * of ROUND_KEY. 'n' is the lane size: 64 for Speck128, or 32 for Speck64. - * 'lanes' is the lane specifier: "2d" for Speck128 or "4s" for Speck64. - */ -.macro _speck_round_128bytes n, lanes - - // x = ror(x, 8) - tbl X_0.16b, {X_0.16b}, ROTATE_TABLE.16b - tbl X_1.16b, {X_1.16b}, ROTATE_TABLE.16b - tbl X_2.16b, {X_2.16b}, ROTATE_TABLE.16b - tbl X_3.16b, {X_3.16b}, ROTATE_TABLE.16b - - // x += y - add X_0.\lanes, X_0.\lanes, Y_0.\lanes - add X_1.\lanes, X_1.\lanes, Y_1.\lanes - add X_2.\lanes, X_2.\lanes, Y_2.\lanes - add X_3.\lanes, X_3.\lanes, Y_3.\lanes - - // x ^= k - eor X_0.16b, X_0.16b, ROUND_KEY.16b - eor X_1.16b, X_1.16b, ROUND_KEY.16b - eor X_2.16b, X_2.16b, ROUND_KEY.16b - eor X_3.16b, X_3.16b, ROUND_KEY.16b - - // y = rol(y, 3) - shl TMP0.\lanes, Y_0.\lanes, #3 - shl TMP1.\lanes, Y_1.\lanes, #3 - shl TMP2.\lanes, Y_2.\lanes, #3 - shl TMP3.\lanes, Y_3.\lanes, #3 - sri TMP0.\lanes, Y_0.\lanes, #(\n - 3) - sri TMP1.\lanes, Y_1.\lanes, #(\n - 3) - sri TMP2.\lanes, Y_2.\lanes, #(\n - 3) - sri TMP3.\lanes, Y_3.\lanes, #(\n - 3) - - // y ^= x - eor Y_0.16b, TMP0.16b, X_0.16b - eor Y_1.16b, TMP1.16b, X_1.16b - eor Y_2.16b, TMP2.16b, X_2.16b - eor Y_3.16b, TMP3.16b, X_3.16b -.endm - -/* - * _speck_unround_128bytes() - Speck decryption round on 128 bytes at a time - * - * This is the inverse of _speck_round_128bytes(). - */ -.macro _speck_unround_128bytes n, lanes - - // y ^= x - eor TMP0.16b, Y_0.16b, X_0.16b - eor TMP1.16b, Y_1.16b, X_1.16b - eor TMP2.16b, Y_2.16b, X_2.16b - eor TMP3.16b, Y_3.16b, X_3.16b - - // y = ror(y, 3) - ushr Y_0.\lanes, TMP0.\lanes, #3 - ushr Y_1.\lanes, TMP1.\lanes, #3 - ushr Y_2.\lanes, TMP2.\lanes, #3 - ushr Y_3.\lanes, TMP3.\lanes, #3 - sli Y_0.\lanes, TMP0.\lanes, #(\n - 3) - sli Y_1.\lanes, TMP1.\lanes, #(\n - 3) - sli Y_2.\lanes, TMP2.\lanes, #(\n - 3) - sli Y_3.\lanes, TMP3.\lanes, #(\n - 3) - - // x ^= k - eor X_0.16b, X_0.16b, ROUND_KEY.16b - eor X_1.16b, X_1.16b, ROUND_KEY.16b - eor X_2.16b, X_2.16b, ROUND_KEY.16b - eor X_3.16b, X_3.16b, ROUND_KEY.16b - - // x -= y - sub X_0.\lanes, X_0.\lanes, Y_0.\lanes - sub X_1.\lanes, X_1.\lanes, Y_1.\lanes - sub X_2.\lanes, X_2.\lanes, Y_2.\lanes - sub X_3.\lanes, X_3.\lanes, Y_3.\lanes - - // x = rol(x, 8) - tbl X_0.16b, {X_0.16b}, ROTATE_TABLE.16b - tbl X_1.16b, {X_1.16b}, ROTATE_TABLE.16b - tbl X_2.16b, {X_2.16b}, ROTATE_TABLE.16b - tbl X_3.16b, {X_3.16b}, ROTATE_TABLE.16b -.endm - -.macro _next_xts_tweak next, cur, tmp, n -.if \n == 64 - /* - * Calculate the next tweak by multiplying the current one by x, - * modulo p(x) = x^128 + x^7 + x^2 + x + 1. - */ - sshr \tmp\().2d, \cur\().2d, #63 - and \tmp\().16b, \tmp\().16b, GFMUL_TABLE.16b - shl \next\().2d, \cur\().2d, #1 - ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8 - eor \next\().16b, \next\().16b, \tmp\().16b -.else - /* - * Calculate the next two tweaks by multiplying the current ones by x^2, - * modulo p(x) = x^64 + x^4 + x^3 + x + 1. - */ - ushr \tmp\().2d, \cur\().2d, #62 - shl \next\().2d, \cur\().2d, #2 - tbl \tmp\().16b, {GFMUL_TABLE.16b}, \tmp\().16b - eor \next\().16b, \next\().16b, \tmp\().16b -.endif -.endm - -/* - * _speck_xts_crypt() - Speck-XTS encryption/decryption - * - * Encrypt or decrypt NBYTES bytes of data from the SRC buffer to the DST buffer - * using Speck-XTS, specifically the variant with a block size of '2n' and round - * count given by NROUNDS. The expanded round keys are given in ROUND_KEYS, and - * the current XTS tweak value is given in TWEAK. It's assumed that NBYTES is a - * nonzero multiple of 128. - */ -.macro _speck_xts_crypt n, lanes, decrypting - - /* - * If decrypting, modify the ROUND_KEYS parameter to point to the last - * round key rather than the first, since for decryption the round keys - * are used in reverse order. - */ -.if \decrypting - mov NROUNDS, NROUNDS /* zero the high 32 bits */ -.if \n == 64 - add ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #3 - sub ROUND_KEYS, ROUND_KEYS, #8 -.else - add ROUND_KEYS, ROUND_KEYS, NROUNDS_X, lsl #2 - sub ROUND_KEYS, ROUND_KEYS, #4 -.endif -.endif - - // Load the index vector for tbl-based 8-bit rotates -.if \decrypting - ldr ROTATE_TABLE_Q, .Lrol\n\()_8_table -.else - ldr ROTATE_TABLE_Q, .Lror\n\()_8_table -.endif - - // One-time XTS preparation -.if \n == 64 - // Load first tweak - ld1 {TWEAKV0.16b}, [TWEAK] - - // Load GF(2^128) multiplication table - ldr GFMUL_TABLE_Q, .Lgf128mul_table -.else - // Load first tweak - ld1 {TWEAKV0.8b}, [TWEAK] - - // Load GF(2^64) multiplication table - ldr GFMUL_TABLE_Q, .Lgf64mul_table - - // Calculate second tweak, packing it together with the first - ushr TMP0.2d, TWEAKV0.2d, #63 - shl TMP1.2d, TWEAKV0.2d, #1 - tbl TMP0.8b, {GFMUL_TABLE.16b}, TMP0.8b - eor TMP0.8b, TMP0.8b, TMP1.8b - mov TWEAKV0.d[1], TMP0.d[0] -.endif - -.Lnext_128bytes_\@: - - // Calculate XTS tweaks for next 128 bytes - _next_xts_tweak TWEAKV1, TWEAKV0, TMP0, \n - _next_xts_tweak TWEAKV2, TWEAKV1, TMP0, \n - _next_xts_tweak TWEAKV3, TWEAKV2, TMP0, \n - _next_xts_tweak TWEAKV4, TWEAKV3, TMP0, \n - _next_xts_tweak TWEAKV5, TWEAKV4, TMP0, \n - _next_xts_tweak TWEAKV6, TWEAKV5, TMP0, \n - _next_xts_tweak TWEAKV7, TWEAKV6, TMP0, \n - _next_xts_tweak TWEAKV_NEXT, TWEAKV7, TMP0, \n - - // Load the next source blocks into {X,Y}[0-3] - ld1 {X_0.16b-Y_1.16b}, [SRC], #64 - ld1 {X_2.16b-Y_3.16b}, [SRC], #64 - - // XOR the source blocks with their XTS tweaks - eor TMP0.16b, X_0.16b, TWEAKV0.16b - eor Y_0.16b, Y_0.16b, TWEAKV1.16b - eor TMP1.16b, X_1.16b, TWEAKV2.16b - eor Y_1.16b, Y_1.16b, TWEAKV3.16b - eor TMP2.16b, X_2.16b, TWEAKV4.16b - eor Y_2.16b, Y_2.16b, TWEAKV5.16b - eor TMP3.16b, X_3.16b, TWEAKV6.16b - eor Y_3.16b, Y_3.16b, TWEAKV7.16b - - /* - * De-interleave the 'x' and 'y' elements of each block, i.e. make it so - * that the X[0-3] registers contain only the second halves of blocks, - * and the Y[0-3] registers contain only the first halves of blocks. - * (Speck uses the order (y, x) rather than the more intuitive (x, y).) - */ - uzp2 X_0.\lanes, TMP0.\lanes, Y_0.\lanes - uzp1 Y_0.\lanes, TMP0.\lanes, Y_0.\lanes - uzp2 X_1.\lanes, TMP1.\lanes, Y_1.\lanes - uzp1 Y_1.\lanes, TMP1.\lanes, Y_1.\lanes - uzp2 X_2.\lanes, TMP2.\lanes, Y_2.\lanes - uzp1 Y_2.\lanes, TMP2.\lanes, Y_2.\lanes - uzp2 X_3.\lanes, TMP3.\lanes, Y_3.\lanes - uzp1 Y_3.\lanes, TMP3.\lanes, Y_3.\lanes - - // Do the cipher rounds - mov x6, ROUND_KEYS - mov w7, NROUNDS -.Lnext_round_\@: -.if \decrypting - ld1r {ROUND_KEY.\lanes}, [x6] - sub x6, x6, #( \n / 8 ) - _speck_unround_128bytes \n, \lanes -.else - ld1r {ROUND_KEY.\lanes}, [x6], #( \n / 8 ) - _speck_round_128bytes \n, \lanes -.endif - subs w7, w7, #1 - bne .Lnext_round_\@ - - // Re-interleave the 'x' and 'y' elements of each block - zip1 TMP0.\lanes, Y_0.\lanes, X_0.\lanes - zip2 Y_0.\lanes, Y_0.\lanes, X_0.\lanes - zip1 TMP1.\lanes, Y_1.\lanes, X_1.\lanes - zip2 Y_1.\lanes, Y_1.\lanes, X_1.\lanes - zip1 TMP2.\lanes, Y_2.\lanes, X_2.\lanes - zip2 Y_2.\lanes, Y_2.\lanes, X_2.\lanes - zip1 TMP3.\lanes, Y_3.\lanes, X_3.\lanes - zip2 Y_3.\lanes, Y_3.\lanes, X_3.\lanes - - // XOR the encrypted/decrypted blocks with the tweaks calculated earlier - eor X_0.16b, TMP0.16b, TWEAKV0.16b - eor Y_0.16b, Y_0.16b, TWEAKV1.16b - eor X_1.16b, TMP1.16b, TWEAKV2.16b - eor Y_1.16b, Y_1.16b, TWEAKV3.16b - eor X_2.16b, TMP2.16b, TWEAKV4.16b - eor Y_2.16b, Y_2.16b, TWEAKV5.16b - eor X_3.16b, TMP3.16b, TWEAKV6.16b - eor Y_3.16b, Y_3.16b, TWEAKV7.16b - mov TWEAKV0.16b, TWEAKV_NEXT.16b - - // Store the ciphertext in the destination buffer - st1 {X_0.16b-Y_1.16b}, [DST], #64 - st1 {X_2.16b-Y_3.16b}, [DST], #64 - - // Continue if there are more 128-byte chunks remaining - subs NBYTES, NBYTES, #128 - bne .Lnext_128bytes_\@ - - // Store the next tweak and return -.if \n == 64 - st1 {TWEAKV_NEXT.16b}, [TWEAK] -.else - st1 {TWEAKV_NEXT.8b}, [TWEAK] -.endif - ret -.endm - -ENTRY(speck128_xts_encrypt_neon) - _speck_xts_crypt n=64, lanes=2d, decrypting=0 -ENDPROC(speck128_xts_encrypt_neon) - -ENTRY(speck128_xts_decrypt_neon) - _speck_xts_crypt n=64, lanes=2d, decrypting=1 -ENDPROC(speck128_xts_decrypt_neon) - -ENTRY(speck64_xts_encrypt_neon) - _speck_xts_crypt n=32, lanes=4s, decrypting=0 -ENDPROC(speck64_xts_encrypt_neon) - -ENTRY(speck64_xts_decrypt_neon) - _speck_xts_crypt n=32, lanes=4s, decrypting=1 -ENDPROC(speck64_xts_decrypt_neon) diff --git a/arch/arm64/crypto/speck-neon-glue.c b/arch/arm64/crypto/speck-neon-glue.c deleted file mode 100644 index 6e233aeb4ff4..000000000000 --- a/arch/arm64/crypto/speck-neon-glue.c +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * NEON-accelerated implementation of Speck128-XTS and Speck64-XTS - * (64-bit version; based on the 32-bit version) - * - * Copyright (c) 2018 Google, Inc - */ - -#include <asm/hwcap.h> -#include <asm/neon.h> -#include <asm/simd.h> -#include <crypto/algapi.h> -#include <crypto/gf128mul.h> -#include <crypto/internal/skcipher.h> -#include <crypto/speck.h> -#include <crypto/xts.h> -#include <linux/kernel.h> -#include <linux/module.h> - -/* The assembly functions only handle multiples of 128 bytes */ -#define SPECK_NEON_CHUNK_SIZE 128 - -/* Speck128 */ - -struct speck128_xts_tfm_ctx { - struct speck128_tfm_ctx main_key; - struct speck128_tfm_ctx tweak_key; -}; - -asmlinkage void speck128_xts_encrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck128_xts_decrypt_neon(const u64 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck128_crypt_one_t)(const struct speck128_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck128_xts_crypt_many_t)(const u64 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck128_xts_crypt(struct skcipher_request *req, - speck128_crypt_one_t crypt_one, - speck128_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - le128 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck128_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - le128_xor((le128 *)dst, (const le128 *)src, &tweak); - (*crypt_one)(&ctx->main_key, dst, dst); - le128_xor((le128 *)dst, (const le128 *)dst, &tweak); - gf128mul_x_ble(&tweak, &tweak); - - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck128_xts_encrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_encrypt, - speck128_xts_encrypt_neon); -} - -static int speck128_xts_decrypt(struct skcipher_request *req) -{ - return __speck128_xts_crypt(req, crypto_speck128_decrypt, - speck128_xts_decrypt_neon); -} - -static int speck128_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck128_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck128_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck128_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -/* Speck64 */ - -struct speck64_xts_tfm_ctx { - struct speck64_tfm_ctx main_key; - struct speck64_tfm_ctx tweak_key; -}; - -asmlinkage void speck64_xts_encrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -asmlinkage void speck64_xts_decrypt_neon(const u32 *round_keys, int nrounds, - void *dst, const void *src, - unsigned int nbytes, void *tweak); - -typedef void (*speck64_crypt_one_t)(const struct speck64_tfm_ctx *, - u8 *, const u8 *); -typedef void (*speck64_xts_crypt_many_t)(const u32 *, int, void *, - const void *, unsigned int, void *); - -static __always_inline int -__speck64_xts_crypt(struct skcipher_request *req, speck64_crypt_one_t crypt_one, - speck64_xts_crypt_many_t crypt_many) -{ - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - const struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - struct skcipher_walk walk; - __le64 tweak; - int err; - - err = skcipher_walk_virt(&walk, req, true); - - crypto_speck64_encrypt(&ctx->tweak_key, (u8 *)&tweak, walk.iv); - - while (walk.nbytes > 0) { - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - const u8 *src = walk.src.virt.addr; - - if (nbytes >= SPECK_NEON_CHUNK_SIZE && may_use_simd()) { - unsigned int count; - - count = round_down(nbytes, SPECK_NEON_CHUNK_SIZE); - kernel_neon_begin(); - (*crypt_many)(ctx->main_key.round_keys, - ctx->main_key.nrounds, - dst, src, count, &tweak); - kernel_neon_end(); - dst += count; - src += count; - nbytes -= count; - } - - /* Handle any remainder with generic code */ - while (nbytes >= sizeof(tweak)) { - *(__le64 *)dst = *(__le64 *)src ^ tweak; - (*crypt_one)(&ctx->main_key, dst, dst); - *(__le64 *)dst ^= tweak; - tweak = cpu_to_le64((le64_to_cpu(tweak) << 1) ^ - ((tweak & cpu_to_le64(1ULL << 63)) ? - 0x1B : 0)); - dst += sizeof(tweak); - src += sizeof(tweak); - nbytes -= sizeof(tweak); - } - err = skcipher_walk_done(&walk, nbytes); - } - - return err; -} - -static int speck64_xts_encrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_encrypt, - speck64_xts_encrypt_neon); -} - -static int speck64_xts_decrypt(struct skcipher_request *req) -{ - return __speck64_xts_crypt(req, crypto_speck64_decrypt, - speck64_xts_decrypt_neon); -} - -static int speck64_xts_setkey(struct crypto_skcipher *tfm, const u8 *key, - unsigned int keylen) -{ - struct speck64_xts_tfm_ctx *ctx = crypto_skcipher_ctx(tfm); - int err; - - err = xts_verify_key(tfm, key, keylen); - if (err) - return err; - - keylen /= 2; - - err = crypto_speck64_setkey(&ctx->main_key, key, keylen); - if (err) - return err; - - return crypto_speck64_setkey(&ctx->tweak_key, key + keylen, keylen); -} - -static struct skcipher_alg speck_algs[] = { - { - .base.cra_name = "xts(speck128)", - .base.cra_driver_name = "xts-speck128-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK128_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck128_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK128_128_KEY_SIZE, - .max_keysize = 2 * SPECK128_256_KEY_SIZE, - .ivsize = SPECK128_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck128_xts_setkey, - .encrypt = speck128_xts_encrypt, - .decrypt = speck128_xts_decrypt, - }, { - .base.cra_name = "xts(speck64)", - .base.cra_driver_name = "xts-speck64-neon", - .base.cra_priority = 300, - .base.cra_blocksize = SPECK64_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct speck64_xts_tfm_ctx), - .base.cra_alignmask = 7, - .base.cra_module = THIS_MODULE, - .min_keysize = 2 * SPECK64_96_KEY_SIZE, - .max_keysize = 2 * SPECK64_128_KEY_SIZE, - .ivsize = SPECK64_BLOCK_SIZE, - .walksize = SPECK_NEON_CHUNK_SIZE, - .setkey = speck64_xts_setkey, - .encrypt = speck64_xts_encrypt, - .decrypt = speck64_xts_decrypt, - } -}; - -static int __init speck_neon_module_init(void) -{ - if (!(elf_hwcap & HWCAP_ASIMD)) - return -ENODEV; - return crypto_register_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -static void __exit speck_neon_module_exit(void) -{ - crypto_unregister_skciphers(speck_algs, ARRAY_SIZE(speck_algs)); -} - -module_init(speck_neon_module_init); -module_exit(speck_neon_module_exit); - -MODULE_DESCRIPTION("Speck block cipher (NEON-accelerated)"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Biggers <ebiggers(a)google.com>"); -MODULE_ALIAS_CRYPTO("xts(speck128)"); -MODULE_ALIAS_CRYPTO("xts-speck128-neon"); -MODULE_ALIAS_CRYPTO("xts(speck64)"); -MODULE_ALIAS_CRYPTO("xts-speck64-neon"); diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index a874e54404d1..4d4c76ab0bac 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -650,7 +650,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 8ce39e23aa42..0fd006c19fa3 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -609,7 +609,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 346c4e75edf8..9343e8d5cf60 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -631,7 +631,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index fca9c7aa71a3..a10fff6e7b50 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -601,7 +601,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index f9eab174915c..db81d8ea9d03 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -611,7 +611,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index b52e597899eb..2546617a1147 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -633,7 +633,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 2a84eeec5b02..dc9b0d885e8b 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -713,7 +713,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 476e69994340..0d815a375ba0 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -601,7 +601,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 1477cda9146e..0cb8109b4c9e 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -601,7 +601,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index b3a543dc48a0..e91a1c28bba7 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -624,7 +624,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index d543ed5dfa96..3b2f0914c34f 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -602,7 +602,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index a67e54246023..e4365ef4f5ed 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -603,7 +603,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m diff --git a/arch/s390/defconfig b/arch/s390/defconfig index f40600eb1762..5134c71a4937 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -221,7 +221,6 @@ CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_SPECK=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_DEFLATE=m diff --git a/crypto/Kconfig b/crypto/Kconfig index f3e40ac56d93..59e32623a7ce 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -1590,20 +1590,6 @@ config CRYPTO_SM4 If unsure, say N. -config CRYPTO_SPECK - tristate "Speck cipher algorithm" - select CRYPTO_ALGAPI - help - Speck is a lightweight block cipher that is tuned for optimal - performance in software (rather than hardware). - - Speck may not be as secure as AES, and should only be used on systems - where AES is not fast enough. - - See also: <https://eprint.iacr.org/2013/404.pdf> - - If unsure, say N. - config CRYPTO_TEA tristate "TEA, XTEA and XETA cipher algorithms" select CRYPTO_ALGAPI diff --git a/crypto/Makefile b/crypto/Makefile index 6d1d40eeb964..f6a234d08882 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -115,7 +115,6 @@ obj-$(CONFIG_CRYPTO_TEA) += tea.o obj-$(CONFIG_CRYPTO_KHAZAD) += khazad.o obj-$(CONFIG_CRYPTO_ANUBIS) += anubis.o obj-$(CONFIG_CRYPTO_SEED) += seed.o -obj-$(CONFIG_CRYPTO_SPECK) += speck.o obj-$(CONFIG_CRYPTO_SALSA20) += salsa20_generic.o obj-$(CONFIG_CRYPTO_CHACHA20) += chacha20_generic.o obj-$(CONFIG_CRYPTO_POLY1305) += poly1305_generic.o diff --git a/crypto/speck.c b/crypto/speck.c deleted file mode 100644 index 58aa9f7f91f7..000000000000 --- a/crypto/speck.c +++ /dev/null @@ -1,307 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Speck: a lightweight block cipher - * - * Copyright (c) 2018 Google, Inc - * - * Speck has 10 variants, including 5 block sizes. For now we only implement - * the variants Speck128/128, Speck128/192, Speck128/256, Speck64/96, and - * Speck64/128. Speck${B}/${K} denotes the variant with a block size of B bits - * and a key size of K bits. The Speck128 variants are believed to be the most - * secure variants, and they use the same block size and key sizes as AES. The - * Speck64 variants are less secure, but on 32-bit processors are usually - * faster. The remaining variants (Speck32, Speck48, and Speck96) are even less - * secure and/or not as well suited for implementation on either 32-bit or - * 64-bit processors, so are omitted. - * - * Reference: "The Simon and Speck Families of Lightweight Block Ciphers" - * https://eprint.iacr.org/2013/404.pdf - * - * In a correspondence, the Speck designers have also clarified that the words - * should be interpreted in little-endian format, and the words should be - * ordered such that the first word of each block is 'y' rather than 'x', and - * the first key word (rather than the last) becomes the first round key. - */ - -#include <asm/unaligned.h> -#include <crypto/speck.h> -#include <linux/bitops.h> -#include <linux/crypto.h> -#include <linux/init.h> -#include <linux/module.h> - -/* Speck128 */ - -static __always_inline void speck128_round(u64 *x, u64 *y, u64 k) -{ - *x = ror64(*x, 8); - *x += *y; - *x ^= k; - *y = rol64(*y, 3); - *y ^= *x; -} - -static __always_inline void speck128_unround(u64 *x, u64 *y, u64 k) -{ - *y ^= *x; - *y = ror64(*y, 3); - *x ^= k; - *x -= *y; - *x = rol64(*x, 8); -} - -void crypto_speck128_encrypt(const struct speck128_tfm_ctx *ctx, - u8 *out, const u8 *in) -{ - u64 y = get_unaligned_le64(in); - u64 x = get_unaligned_le64(in + 8); - int i; - - for (i = 0; i < ctx->nrounds; i++) - speck128_round(&x, &y, ctx->round_keys[i]); - - put_unaligned_le64(y, out); - put_unaligned_le64(x, out + 8); -} -EXPORT_SYMBOL_GPL(crypto_speck128_encrypt); - -static void speck128_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -{ - crypto_speck128_encrypt(crypto_tfm_ctx(tfm), out, in); -} - -void crypto_speck128_decrypt(const struct speck128_tfm_ctx *ctx, - u8 *out, const u8 *in) -{ - u64 y = get_unaligned_le64(in); - u64 x = get_unaligned_le64(in + 8); - int i; - - for (i = ctx->nrounds - 1; i >= 0; i--) - speck128_unround(&x, &y, ctx->round_keys[i]); - - put_unaligned_le64(y, out); - put_unaligned_le64(x, out + 8); -} -EXPORT_SYMBOL_GPL(crypto_speck128_decrypt); - -static void speck128_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -{ - crypto_speck128_decrypt(crypto_tfm_ctx(tfm), out, in); -} - -int crypto_speck128_setkey(struct speck128_tfm_ctx *ctx, const u8 *key, - unsigned int keylen) -{ - u64 l[3]; - u64 k; - int i; - - switch (keylen) { - case SPECK128_128_KEY_SIZE: - k = get_unaligned_le64(key); - l[0] = get_unaligned_le64(key + 8); - ctx->nrounds = SPECK128_128_NROUNDS; - for (i = 0; i < ctx->nrounds; i++) { - ctx->round_keys[i] = k; - speck128_round(&l[0], &k, i); - } - break; - case SPECK128_192_KEY_SIZE: - k = get_unaligned_le64(key); - l[0] = get_unaligned_le64(key + 8); - l[1] = get_unaligned_le64(key + 16); - ctx->nrounds = SPECK128_192_NROUNDS; - for (i = 0; i < ctx->nrounds; i++) { - ctx->round_keys[i] = k; - speck128_round(&l[i % 2], &k, i); - } - break; - case SPECK128_256_KEY_SIZE: - k = get_unaligned_le64(key); - l[0] = get_unaligned_le64(key + 8); - l[1] = get_unaligned_le64(key + 16); - l[2] = get_unaligned_le64(key + 24); - ctx->nrounds = SPECK128_256_NROUNDS; - for (i = 0; i < ctx->nrounds; i++) { - ctx->round_keys[i] = k; - speck128_round(&l[i % 3], &k, i); - } - break; - default: - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(crypto_speck128_setkey); - -static int speck128_setkey(struct crypto_tfm *tfm, const u8 *key, - unsigned int keylen) -{ - return crypto_speck128_setkey(crypto_tfm_ctx(tfm), key, keylen); -} - -/* Speck64 */ - -static __always_inline void speck64_round(u32 *x, u32 *y, u32 k) -{ - *x = ror32(*x, 8); - *x += *y; - *x ^= k; - *y = rol32(*y, 3); - *y ^= *x; -} - -static __always_inline void speck64_unround(u32 *x, u32 *y, u32 k) -{ - *y ^= *x; - *y = ror32(*y, 3); - *x ^= k; - *x -= *y; - *x = rol32(*x, 8); -} - -void crypto_speck64_encrypt(const struct speck64_tfm_ctx *ctx, - u8 *out, const u8 *in) -{ - u32 y = get_unaligned_le32(in); - u32 x = get_unaligned_le32(in + 4); - int i; - - for (i = 0; i < ctx->nrounds; i++) - speck64_round(&x, &y, ctx->round_keys[i]); - - put_unaligned_le32(y, out); - put_unaligned_le32(x, out + 4); -} -EXPORT_SYMBOL_GPL(crypto_speck64_encrypt); - -static void speck64_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -{ - crypto_speck64_encrypt(crypto_tfm_ctx(tfm), out, in); -} - -void crypto_speck64_decrypt(const struct speck64_tfm_ctx *ctx, - u8 *out, const u8 *in) -{ - u32 y = get_unaligned_le32(in); - u32 x = get_unaligned_le32(in + 4); - int i; - - for (i = ctx->nrounds - 1; i >= 0; i--) - speck64_unround(&x, &y, ctx->round_keys[i]); - - put_unaligned_le32(y, out); - put_unaligned_le32(x, out + 4); -} -EXPORT_SYMBOL_GPL(crypto_speck64_decrypt); - -static void speck64_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) -{ - crypto_speck64_decrypt(crypto_tfm_ctx(tfm), out, in); -} - -int crypto_speck64_setkey(struct speck64_tfm_ctx *ctx, const u8 *key, - unsigned int keylen) -{ - u32 l[3]; - u32 k; - int i; - - switch (keylen) { - case SPECK64_96_KEY_SIZE: - k = get_unaligned_le32(key); - l[0] = get_unaligned_le32(key + 4); - l[1] = get_unaligned_le32(key + 8); - ctx->nrounds = SPECK64_96_NROUNDS; - for (i = 0; i < ctx->nrounds; i++) { - ctx->round_keys[i] = k; - speck64_round(&l[i % 2], &k, i); - } - break; - case SPECK64_128_KEY_SIZE: - k = get_unaligned_le32(key); - l[0] = get_unaligned_le32(key + 4); - l[1] = get_unaligned_le32(key + 8); - l[2] = get_unaligned_le32(key + 12); - ctx->nrounds = SPECK64_128_NROUNDS; - for (i = 0; i < ctx->nrounds; i++) { - ctx->round_keys[i] = k; - speck64_round(&l[i % 3], &k, i); - } - break; - default: - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(crypto_speck64_setkey); - -static int speck64_setkey(struct crypto_tfm *tfm, const u8 *key, - unsigned int keylen) -{ - return crypto_speck64_setkey(crypto_tfm_ctx(tfm), key, keylen); -} - -/* Algorithm definitions */ - -static struct crypto_alg speck_algs[] = { - { - .cra_name = "speck128", - .cra_driver_name = "speck128-generic", - .cra_priority = 100, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = SPECK128_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct speck128_tfm_ctx), - .cra_module = THIS_MODULE, - .cra_u = { - .cipher = { - .cia_min_keysize = SPECK128_128_KEY_SIZE, - .cia_max_keysize = SPECK128_256_KEY_SIZE, - .cia_setkey = speck128_setkey, - .cia_encrypt = speck128_encrypt, - .cia_decrypt = speck128_decrypt - } - } - }, { - .cra_name = "speck64", - .cra_driver_name = "speck64-generic", - .cra_priority = 100, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = SPECK64_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct speck64_tfm_ctx), - .cra_module = THIS_MODULE, - .cra_u = { - .cipher = { - .cia_min_keysize = SPECK64_96_KEY_SIZE, - .cia_max_keysize = SPECK64_128_KEY_SIZE, - .cia_setkey = speck64_setkey, - .cia_encrypt = speck64_encrypt, - .cia_decrypt = speck64_decrypt - } - } - } -}; - -static int __init speck_module_init(void) -{ - return crypto_register_algs(speck_algs, ARRAY_SIZE(speck_algs)); -} - -static void __exit speck_module_exit(void) -{ - crypto_unregister_algs(speck_algs, ARRAY_SIZE(speck_algs)); -} - -module_init(speck_module_init); -module_exit(speck_module_exit); - -MODULE_DESCRIPTION("Speck block cipher (generic)"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Biggers <ebiggers(a)google.com>"); -MODULE_ALIAS_CRYPTO("speck128"); -MODULE_ALIAS_CRYPTO("speck128-generic"); -MODULE_ALIAS_CRYPTO("speck64"); -MODULE_ALIAS_CRYPTO("speck64-generic"); diff --git a/crypto/testmgr.c b/crypto/testmgr.c index 11e45352fd0b..1ed03bf6a977 100644 --- a/crypto/testmgr.c +++ b/crypto/testmgr.c @@ -3000,18 +3000,6 @@ static const struct alg_test_desc alg_test_descs[] = { .suite = { .cipher = __VECS(sm4_tv_template) } - }, { - .alg = "ecb(speck128)", - .test = alg_test_skcipher, - .suite = { - .cipher = __VECS(speck128_tv_template) - } - }, { - .alg = "ecb(speck64)", - .test = alg_test_skcipher, - .suite = { - .cipher = __VECS(speck64_tv_template) - } }, { .alg = "ecb(tea)", .test = alg_test_skcipher, @@ -3539,18 +3527,6 @@ static const struct alg_test_desc alg_test_descs[] = { .suite = { .cipher = __VECS(serpent_xts_tv_template) } - }, { - .alg = "xts(speck128)", - .test = alg_test_skcipher, - .suite = { - .cipher = __VECS(speck128_xts_tv_template) - } - }, { - .alg = "xts(speck64)", - .test = alg_test_skcipher, - .suite = { - .cipher = __VECS(speck64_xts_tv_template) - } }, { .alg = "xts(twofish)", .test = alg_test_skcipher, diff --git a/crypto/testmgr.h b/crypto/testmgr.h index b950aa234e43..36572c665026 100644 --- a/crypto/testmgr.h +++ b/crypto/testmgr.h @@ -10141,744 +10141,6 @@ static const struct cipher_testvec sm4_tv_template[] = { } }; -/* - * Speck test vectors taken from the original paper: - * "The Simon and Speck Families of Lightweight Block Ciphers" - * https://eprint.iacr.org/2013/404.pdf - * - * Note that the paper does not make byte and word order clear. But it was - * confirmed with the authors that the intended orders are little endian byte - * order and (y, x) word order. Equivalently, the printed test vectors, when - * looking at only the bytes (ignoring the whitespace that divides them into - * words), are backwards: the left-most byte is actually the one with the - * highest memory address, while the right-most byte is actually the one with - * the lowest memory address. - */ - -static const struct cipher_testvec speck128_tv_template[] = { - { /* Speck128/128 */ - .key = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f", - .klen = 16, - .ptext = "\x20\x6d\x61\x64\x65\x20\x69\x74" - "\x20\x65\x71\x75\x69\x76\x61\x6c", - .ctext = "\x18\x0d\x57\x5c\xdf\xfe\x60\x78" - "\x65\x32\x78\x79\x51\x98\x5d\xa6", - .len = 16, - }, { /* Speck128/192 */ - .key = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17", - .klen = 24, - .ptext = "\x65\x6e\x74\x20\x74\x6f\x20\x43" - "\x68\x69\x65\x66\x20\x48\x61\x72", - .ctext = "\x86\x18\x3c\xe0\x5d\x18\xbc\xf9" - "\x66\x55\x13\x13\x3a\xcf\xe4\x1b", - .len = 16, - }, { /* Speck128/256 */ - .key = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f", - .klen = 32, - .ptext = "\x70\x6f\x6f\x6e\x65\x72\x2e\x20" - "\x49\x6e\x20\x74\x68\x6f\x73\x65", - .ctext = "\x43\x8f\x18\x9c\x8d\xb4\xee\x4e" - "\x3e\xf5\xc0\x05\x04\x01\x09\x41", - .len = 16, - }, -}; - -/* - * Speck128-XTS test vectors, taken from the AES-XTS test vectors with the - * ciphertext recomputed with Speck128 as the cipher - */ -static const struct cipher_testvec speck128_xts_tv_template[] = { - { - .key = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .klen = 32, - .iv = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ctext = "\xbe\xa0\xe7\x03\xd7\xfe\xab\x62" - "\x3b\x99\x4a\x64\x74\x77\xac\xed" - "\xd8\xf4\xa6\xcf\xae\xb9\x07\x42" - "\x51\xd9\xb6\x1d\xe0\x5e\xbc\x54", - .len = 32, - }, { - .key = "\x11\x11\x11\x11\x11\x11\x11\x11" - "\x11\x11\x11\x11\x11\x11\x11\x11" - "\x22\x22\x22\x22\x22\x22\x22\x22" - "\x22\x22\x22\x22\x22\x22\x22\x22", - .klen = 32, - .iv = "\x33\x33\x33\x33\x33\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44", - .ctext = "\xfb\x53\x81\x75\x6f\x9f\x34\xad" - "\x7e\x01\xed\x7b\xcc\xda\x4e\x4a" - "\xd4\x84\xa4\x53\xd5\x88\x73\x1b" - "\xfd\xcb\xae\x0d\xf3\x04\xee\xe6", - .len = 32, - }, { - .key = "\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8" - "\xf7\xf6\xf5\xf4\xf3\xf2\xf1\xf0" - "\x22\x22\x22\x22\x22\x22\x22\x22" - "\x22\x22\x22\x22\x22\x22\x22\x22", - .klen = 32, - .iv = "\x33\x33\x33\x33\x33\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44", - .ctext = "\x21\x52\x84\x15\xd1\xf7\x21\x55" - "\xd9\x75\x4a\xd3\xc5\xdb\x9f\x7d" - "\xda\x63\xb2\xf1\x82\xb0\x89\x59" - "\x86\xd4\xaa\xaa\xdd\xff\x4f\x92", - .len = 32, - }, { - .key = "\x27\x18\x28\x18\x28\x45\x90\x45" - "\x23\x53\x60\x28\x74\x71\x35\x26" - "\x31\x41\x59\x26\x53\x58\x97\x93" - "\x23\x84\x62\x64\x33\x83\x27\x95", - .klen = 32, - .iv = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff" - "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", - .ctext = "\x57\xb5\xf8\x71\x6e\x6d\xdd\x82" - "\x53\xd0\xed\x2d\x30\xc1\x20\xef" - "\x70\x67\x5e\xff\x09\x70\xbb\xc1" - "\x3a\x7b\x48\x26\xd9\x0b\xf4\x48" - "\xbe\xce\xb1\xc7\xb2\x67\xc4\xa7" - "\x76\xf8\x36\x30\xb7\xb4\x9a\xd9" - "\xf5\x9d\xd0\x7b\xc1\x06\x96\x44" - "\x19\xc5\x58\x84\x63\xb9\x12\x68" - "\x68\xc7\xaa\x18\x98\xf2\x1f\x5c" - "\x39\xa6\xd8\x32\x2b\xc3\x51\xfd" - "\x74\x79\x2e\xb4\x44\xd7\x69\xc4" - "\xfc\x29\xe6\xed\x26\x1e\xa6\x9d" - "\x1c\xbe\x00\x0e\x7f\x3a\xca\xfb" - "\x6d\x13\x65\xa0\xf9\x31\x12\xe2" - "\x26\xd1\xec\x2b\x0a\x8b\x59\x99" - "\xa7\x49\xa0\x0e\x09\x33\x85\x50" - "\xc3\x23\xca\x7a\xdd\x13\x45\x5f" - "\xde\x4c\xa7\xcb\x00\x8a\x66\x6f" - "\xa2\xb6\xb1\x2e\xe1\xa0\x18\xf6" - "\xad\xf3\xbd\xeb\xc7\xef\x55\x4f" - "\x79\x91\x8d\x36\x13\x7b\xd0\x4a" - "\x6c\x39\xfb\x53\xb8\x6f\x02\x51" - "\xa5\x20\xac\x24\x1c\x73\x59\x73" - "\x58\x61\x3a\x87\x58\xb3\x20\x56" - "\x39\x06\x2b\x4d\xd3\x20\x2b\x89" - "\x3f\xa2\xf0\x96\xeb\x7f\xa4\xcd" - "\x11\xae\xbd\xcb\x3a\xb4\xd9\x91" - "\x09\x35\x71\x50\x65\xac\x92\xe3" - "\x7b\x32\xc0\x7a\xdd\xd4\xc3\x92" - "\x6f\xeb\x79\xde\x6f\xd3\x25\xc9" - "\xcd\x63\xf5\x1e\x7a\x3b\x26\x9d" - "\x77\x04\x80\xa9\xbf\x38\xb5\xbd" - "\xb8\x05\x07\xbd\xfd\xab\x7b\xf8" - "\x2a\x26\xcc\x49\x14\x6d\x55\x01" - "\x06\x94\xd8\xb2\x2d\x53\x83\x1b" - "\x8f\xd4\xdd\x57\x12\x7e\x18\xba" - "\x8e\xe2\x4d\x80\xef\x7e\x6b\x9d" - "\x24\xa9\x60\xa4\x97\x85\x86\x2a" - "\x01\x00\x09\xf1\xcb\x4a\x24\x1c" - "\xd8\xf6\xe6\x5b\xe7\x5d\xf2\xc4" - "\x97\x1c\x10\xc6\x4d\x66\x4f\x98" - "\x87\x30\xac\xd5\xea\x73\x49\x10" - "\x80\xea\xe5\x5f\x4d\x5f\x03\x33" - "\x66\x02\x35\x3d\x60\x06\x36\x4f" - "\x14\x1c\xd8\x07\x1f\x78\xd0\xf8" - "\x4f\x6c\x62\x7c\x15\xa5\x7c\x28" - "\x7c\xcc\xeb\x1f\xd1\x07\x90\x93" - "\x7e\xc2\xa8\x3a\x80\xc0\xf5\x30" - "\xcc\x75\xcf\x16\x26\xa9\x26\x3b" - "\xe7\x68\x2f\x15\x21\x5b\xe4\x00" - "\xbd\x48\x50\xcd\x75\x70\xc4\x62" - "\xbb\x41\xfb\x89\x4a\x88\x3b\x3b" - "\x51\x66\x02\x69\x04\x97\x36\xd4" - "\x75\xae\x0b\xa3\x42\xf8\xca\x79" - "\x8f\x93\xe9\xcc\x38\xbd\xd6\xd2" - "\xf9\x70\x4e\xc3\x6a\x8e\x25\xbd" - "\xea\x15\x5a\xa0\x85\x7e\x81\x0d" - "\x03\xe7\x05\x39\xf5\x05\x26\xee" - "\xec\xaa\x1f\x3d\xc9\x98\x76\x01" - "\x2c\xf4\xfc\xa3\x88\x77\x38\xc4" - "\x50\x65\x50\x6d\x04\x1f\xdf\x5a" - "\xaa\xf2\x01\xa9\xc1\x8d\xee\xca" - "\x47\x26\xef\x39\xb8\xb4\xf2\xd1" - "\xd6\xbb\x1b\x2a\xc1\x34\x14\xcf", - .len = 512, - }, { - .key = "\x27\x18\x28\x18\x28\x45\x90\x45" - "\x23\x53\x60\x28\x74\x71\x35\x26" - "\x62\x49\x77\x57\x24\x70\x93\x69" - "\x99\x59\x57\x49\x66\x96\x76\x27" - "\x31\x41\x59\x26\x53\x58\x97\x93" - "\x23\x84\x62\x64\x33\x83\x27\x95" - "\x02\x88\x41\x97\x16\x93\x99\x37" - "\x51\x05\x82\x09\x74\x94\x45\x92", - .klen = 64, - .iv = "\xff\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff" - "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", - .ctext = "\xc5\x85\x2a\x4b\x73\xe4\xf6\xf1" - "\x7e\xf9\xf6\xe9\xa3\x73\x36\xcb" - "\xaa\xb6\x22\xb0\x24\x6e\x3d\x73" - "\x92\x99\xde\xd3\x76\xed\xcd\x63" - "\x64\x3a\x22\x57\xc1\x43\x49\xd4" - "\x79\x36\x31\x19\x62\xae\x10\x7e" - "\x7d\xcf\x7a\xe2\x6b\xce\x27\xfa" - "\xdc\x3d\xd9\x83\xd3\x42\x4c\xe0" - "\x1b\xd6\x1d\x1a\x6f\xd2\x03\x00" - "\xfc\x81\x99\x8a\x14\x62\xf5\x7e" - "\x0d\xe7\x12\xe8\x17\x9d\x0b\xec" - "\xe2\xf7\xc9\xa7\x63\xd1\x79\xb6" - "\x62\x62\x37\xfe\x0a\x4c\x4a\x37" - "\x70\xc7\x5e\x96\x5f\xbc\x8e\x9e" - "\x85\x3c\x4f\x26\x64\x85\xbc\x68" - "\xb0\xe0\x86\x5e\x26\x41\xce\x11" - "\x50\xda\x97\x14\xe9\x9e\xc7\x6d" - "\x3b\xdc\x43\xde\x2b\x27\x69\x7d" - "\xfc\xb0\x28\xbd\x8f\xb1\xc6\x31" - "\x14\x4d\xf0\x74\x37\xfd\x07\x25" - "\x96\x55\xe5\xfc\x9e\x27\x2a\x74" - "\x1b\x83\x4d\x15\x83\xac\x57\xa0" - "\xac\xa5\xd0\x38\xef\x19\x56\x53" - "\x25\x4b\xfc\xce\x04\x23\xe5\x6b" - "\xf6\xc6\x6c\x32\x0b\xb3\x12\xc5" - "\xed\x22\x34\x1c\x5d\xed\x17\x06" - "\x36\xa3\xe6\x77\xb9\x97\x46\xb8" - "\xe9\x3f\x7e\xc7\xbc\x13\x5c\xdc" - "\x6e\x3f\x04\x5e\xd1\x59\xa5\x82" - "\x35\x91\x3d\x1b\xe4\x97\x9f\x92" - "\x1c\x5e\x5f\x6f\x41\xd4\x62\xa1" - "\x8d\x39\xfc\x42\xfb\x38\x80\xb9" - "\x0a\xe3\xcc\x6a\x93\xd9\x7a\xb1" - "\xe9\x69\xaf\x0a\x6b\x75\x38\xa7" - "\xa1\xbf\xf7\xda\x95\x93\x4b\x78" - "\x19\xf5\x94\xf9\xd2\x00\x33\x37" - "\xcf\xf5\x9e\x9c\xf3\xcc\xa6\xee" - "\x42\xb2\x9e\x2c\x5f\x48\x23\x26" - "\x15\x25\x17\x03\x3d\xfe\x2c\xfc" - "\xeb\xba\xda\xe0\x00\x05\xb6\xa6" - "\x07\xb3\xe8\x36\x5b\xec\x5b\xbf" - "\xd6\x5b\x00\x74\xc6\x97\xf1\x6a" - "\x49\xa1\xc3\xfa\x10\x52\xb9\x14" - "\xad\xb7\x73\xf8\x78\x12\xc8\x59" - "\x17\x80\x4c\x57\x39\xf1\x6d\x80" - "\x25\x77\x0f\x5e\x7d\xf0\xaf\x21" - "\xec\xce\xb7\xc8\x02\x8a\xed\x53" - "\x2c\x25\x68\x2e\x1f\x85\x5e\x67" - "\xd1\x07\x7a\x3a\x89\x08\xe0\x34" - "\xdc\xdb\x26\xb4\x6b\x77\xfc\x40" - "\x31\x15\x72\xa0\xf0\x73\xd9\x3b" - "\xd5\xdb\xfe\xfc\x8f\xa9\x44\xa2" - "\x09\x9f\xc6\x33\xe5\xe2\x88\xe8" - "\xf3\xf0\x1a\xf4\xce\x12\x0f\xd6" - "\xf7\x36\xe6\xa4\xf4\x7a\x10\x58" - "\xcc\x1f\x48\x49\x65\x47\x75\xe9" - "\x28\xe1\x65\x7b\xf2\xc4\xb5\x07" - "\xf2\xec\x76\xd8\x8f\x09\xf3\x16" - "\xa1\x51\x89\x3b\xeb\x96\x42\xac" - "\x65\xe0\x67\x63\x29\xdc\xb4\x7d" - "\xf2\x41\x51\x6a\xcb\xde\x3c\xfb" - "\x66\x8d\x13\xca\xe0\x59\x2a\x00" - "\xc9\x53\x4c\xe6\x9e\xe2\x73\xd5" - "\x67\x19\xb2\xbd\x9a\x63\xd7\x5c", - .len = 512, - .also_non_np = 1, - .np = 3, - .tap = { 512 - 20, 4, 16 }, - } -}; - -static const struct cipher_testvec speck64_tv_template[] = { - { /* Speck64/96 */ - .key = "\x00\x01\x02\x03\x08\x09\x0a\x0b" - "\x10\x11\x12\x13", - .klen = 12, - .ptext = "\x65\x61\x6e\x73\x20\x46\x61\x74", - .ctext = "\x6c\x94\x75\x41\xec\x52\x79\x9f", - .len = 8, - }, { /* Speck64/128 */ - .key = "\x00\x01\x02\x03\x08\x09\x0a\x0b" - "\x10\x11\x12\x13\x18\x19\x1a\x1b", - .klen = 16, - .ptext = "\x2d\x43\x75\x74\x74\x65\x72\x3b", - .ctext = "\x8b\x02\x4e\x45\x48\xa5\x6f\x8c", - .len = 8, - }, -}; - -/* - * Speck64-XTS test vectors, taken from the AES-XTS test vectors with the - * ciphertext recomputed with Speck64 as the cipher, and key lengths adjusted - */ -static const struct cipher_testvec speck64_xts_tv_template[] = { - { - .key = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .klen = 24, - .iv = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ctext = "\x84\xaf\x54\x07\x19\xd4\x7c\xa6" - "\xe4\xfe\xdf\xc4\x1f\x34\xc3\xc2" - "\x80\xf5\x72\xe7\xcd\xf0\x99\x22" - "\x35\xa7\x2f\x06\xef\xdc\x51\xaa", - .len = 32, - }, { - .key = "\x11\x11\x11\x11\x11\x11\x11\x11" - "\x11\x11\x11\x11\x11\x11\x11\x11" - "\x22\x22\x22\x22\x22\x22\x22\x22", - .klen = 24, - .iv = "\x33\x33\x33\x33\x33\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44", - .ctext = "\x12\x56\x73\xcd\x15\x87\xa8\x59" - "\xcf\x84\xae\xd9\x1c\x66\xd6\x9f" - "\xb3\x12\x69\x7e\x36\xeb\x52\xff" - "\x62\xdd\xba\x90\xb3\xe1\xee\x99", - .len = 32, - }, { - .key = "\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8" - "\xf7\xf6\xf5\xf4\xf3\xf2\xf1\xf0" - "\x22\x22\x22\x22\x22\x22\x22\x22", - .klen = 24, - .iv = "\x33\x33\x33\x33\x33\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44" - "\x44\x44\x44\x44\x44\x44\x44\x44", - .ctext = "\x15\x1b\xe4\x2c\xa2\x5a\x2d\x2c" - "\x27\x36\xc0\xbf\x5d\xea\x36\x37" - "\x2d\x1a\x88\xbc\x66\xb5\xd0\x0b" - "\xa1\xbc\x19\xb2\x0f\x3b\x75\x34", - .len = 32, - }, { - .key = "\x27\x18\x28\x18\x28\x45\x90\x45" - "\x23\x53\x60\x28\x74\x71\x35\x26" - "\x31\x41\x59\x26\x53\x58\x97\x93", - .klen = 24, - .iv = "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff" - "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", - .ctext = "\xaf\xa1\x81\xa6\x32\xbb\x15\x8e" - "\xf8\x95\x2e\xd3\xe6\xee\x7e\x09" - "\x0c\x1a\xf5\x02\x97\x8b\xe3\xb3" - "\x11\xc7\x39\x96\xd0\x95\xf4\x56" - "\xf4\xdd\x03\x38\x01\x44\x2c\xcf" - "\x88\xae\x8e\x3c\xcd\xe7\xaa\x66" - "\xfe\x3d\xc6\xfb\x01\x23\x51\x43" - "\xd5\xd2\x13\x86\x94\x34\xe9\x62" - "\xf9\x89\xe3\xd1\x7b\xbe\xf8\xef" - "\x76\x35\x04\x3f\xdb\x23\x9d\x0b" - "\x85\x42\xb9\x02\xd6\xcc\xdb\x96" - "\xa7\x6b\x27\xb6\xd4\x45\x8f\x7d" - "\xae\xd2\x04\xd5\xda\xc1\x7e\x24" - "\x8c\x73\xbe\x48\x7e\xcf\x65\x28" - "\x29\xe5\xbe\x54\x30\xcb\x46\x95" - "\x4f\x2e\x8a\x36\xc8\x27\xc5\xbe" - "\xd0\x1a\xaf\xab\x26\xcd\x9e\x69" - "\xa1\x09\x95\x71\x26\xe9\xc4\xdf" - "\xe6\x31\xc3\x46\xda\xaf\x0b\x41" - "\x1f\xab\xb1\x8e\xd6\xfc\x0b\xb3" - "\x82\xc0\x37\x27\xfc\x91\xa7\x05" - "\xfb\xc5\xdc\x2b\x74\x96\x48\x43" - "\x5d\x9c\x19\x0f\x60\x63\x3a\x1f" - "\x6f\xf0\x03\xbe\x4d\xfd\xc8\x4a" - "\xc6\xa4\x81\x6d\xc3\x12\x2a\x5c" - "\x07\xff\xf3\x72\x74\x48\xb5\x40" - "\x50\xb5\xdd\x90\x43\x31\x18\x15" - "\x7b\xf2\xa6\xdb\x83\xc8\x4b\x4a" - "\x29\x93\x90\x8b\xda\x07\xf0\x35" - "\x6d\x90\x88\x09\x4e\x83\xf5\x5b" - "\x94\x12\xbb\x33\x27\x1d\x3f\x23" - "\x51\xa8\x7c\x07\xa2\xae\x77\xa6" - "\x50\xfd\xcc\xc0\x4f\x80\x7a\x9f" - "\x66\xdd\xcd\x75\x24\x8b\x33\xf7" - "\x20\xdb\x83\x9b\x4f\x11\x63\x6e" - "\xcf\x37\xef\xc9\x11\x01\x5c\x45" - "\x32\x99\x7c\x3c\x9e\x42\x89\xe3" - "\x70\x6d\x15\x9f\xb1\xe6\xb6\x05" - "\xfe\x0c\xb9\x49\x2d\x90\x6d\xcc" - "\x5d\x3f\xc1\xfe\x89\x0a\x2e\x2d" - "\xa0\xa8\x89\x3b\x73\x39\xa5\x94" - "\x4c\xa4\xa6\xbb\xa7\x14\x46\x89" - "\x10\xff\xaf\xef\xca\xdd\x4f\x80" - "\xb3\xdf\x3b\xab\xd4\xe5\x5a\xc7" - "\x33\xca\x00\x8b\x8b\x3f\xea\xec" - "\x68\x8a\xc2\x6d\xfd\xd4\x67\x0f" - "\x22\x31\xe1\x0e\xfe\x5a\x04\xd5" - "\x64\xa3\xf1\x1a\x76\x28\xcc\x35" - "\x36\xa7\x0a\x74\xf7\x1c\x44\x9b" - "\xc7\x1b\x53\x17\x02\xea\xd1\xad" - "\x13\x51\x73\xc0\xa0\xb2\x05\x32" - "\xa8\xa2\x37\x2e\xe1\x7a\x3a\x19" - "\x26\xb4\x6c\x62\x5d\xb3\x1a\x1d" - "\x59\xda\xee\x1a\x22\x18\xda\x0d" - "\x88\x0f\x55\x8b\x72\x62\xfd\xc1" - "\x69\x13\xcd\x0d\x5f\xc1\x09\x52" - "\xee\xd6\xe3\x84\x4d\xee\xf6\x88" - "\xaf\x83\xdc\x76\xf4\xc0\x93\x3f" - "\x4a\x75\x2f\xb0\x0b\x3e\xc4\x54" - "\x7d\x69\x8d\x00\x62\x77\x0d\x14" - "\xbe\x7c\xa6\x7d\xc5\x24\x4f\xf3" - "\x50\xf7\x5f\xf4\xc2\xca\x41\x97" - "\x37\xbe\x75\x74\xcd\xf0\x75\x6e" - "\x25\x23\x94\xbd\xda\x8d\xb0\xd4", - .len = 512, - }, { - .key = "\x27\x18\x28\x18\x28\x45\x90\x45" - "\x23\x53\x60\x28\x74\x71\x35\x26" - "\x62\x49\x77\x57\x24\x70\x93\x69" - "\x99\x59\x57\x49\x66\x96\x76\x27", - .klen = 32, - .iv = "\xff\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00", - .ptext = "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff" - "\x00\x01\x02\x03\x04\x05\x06\x07" - "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" - "\x10\x11\x12\x13\x14\x15\x16\x17" - "\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f" - "\x20\x21\x22\x23\x24\x25\x26\x27" - "\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f" - "\x30\x31\x32\x33\x34\x35\x36\x37" - "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f" - "\x40\x41\x42\x43\x44\x45\x46\x47" - "\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f" - "\x50\x51\x52\x53\x54\x55\x56\x57" - "\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f" - "\x60\x61\x62\x63\x64\x65\x66\x67" - "\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f" - "\x70\x71\x72\x73\x74\x75\x76\x77" - "\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f" - "\x80\x81\x82\x83\x84\x85\x86\x87" - "\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f" - "\x90\x91\x92\x93\x94\x95\x96\x97" - "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f" - "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" - "\xa8\xa9\xaa\xab\xac\xad\xae\xaf" - "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7" - "\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf" - "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7" - "\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf" - "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7" - "\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf" - "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" - "\xe8\xe9\xea\xeb\xec\xed\xee\xef" - "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7" - "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", - .ctext = "\x55\xed\x71\xd3\x02\x8e\x15\x3b" - "\xc6\x71\x29\x2d\x3e\x89\x9f\x59" - "\x68\x6a\xcc\x8a\x56\x97\xf3\x95" - "\x4e\x51\x08\xda\x2a\xf8\x6f\x3c" - "\x78\x16\xea\x80\xdb\x33\x75\x94" - "\xf9\x29\xc4\x2b\x76\x75\x97\xc7" - "\xf2\x98\x2c\xf9\xff\xc8\xd5\x2b" - "\x18\xf1\xaf\xcf\x7c\xc5\x0b\xee" - "\xad\x3c\x76\x7c\xe6\x27\xa2\x2a" - "\xe4\x66\xe1\xab\xa2\x39\xfc\x7c" - "\xf5\xec\x32\x74\xa3\xb8\x03\x88" - "\x52\xfc\x2e\x56\x3f\xa1\xf0\x9f" - "\x84\x5e\x46\xed\x20\x89\xb6\x44" - "\x8d\xd0\xed\x54\x47\x16\xbe\x95" - "\x8a\xb3\x6b\x72\xc4\x32\x52\x13" - "\x1b\xb0\x82\xbe\xac\xf9\x70\xa6" - "\x44\x18\xdd\x8c\x6e\xca\x6e\x45" - "\x8f\x1e\x10\x07\x57\x25\x98\x7b" - "\x17\x8c\x78\xdd\x80\xa7\xd9\xd8" - "\x63\xaf\xb9\x67\x57\xfd\xbc\xdb" - "\x44\xe9\xc5\x65\xd1\xc7\x3b\xff" - "\x20\xa0\x80\x1a\xc3\x9a\xad\x5e" - "\x5d\x3b\xd3\x07\xd9\xf5\xfd\x3d" - "\x4a\x8b\xa8\xd2\x6e\x7a\x51\x65" - "\x6c\x8e\x95\xe0\x45\xc9\x5f\x4a" - "\x09\x3c\x3d\x71\x7f\x0c\x84\x2a" - "\xc8\x48\x52\x1a\xc2\xd5\xd6\x78" - "\x92\x1e\xa0\x90\x2e\xea\xf0\xf3" - "\xdc\x0f\xb1\xaf\x0d\x9b\x06\x2e" - "\x35\x10\x30\x82\x0d\xe7\xc5\x9b" - "\xde\x44\x18\xbd\x9f\xd1\x45\xa9" - "\x7b\x7a\x4a\xad\x35\x65\x27\xca" - "\xb2\xc3\xd4\x9b\x71\x86\x70\xee" - "\xf1\x89\x3b\x85\x4b\x5b\xaa\xaf" - "\xfc\x42\xc8\x31\x59\xbe\x16\x60" - "\x4f\xf9\xfa\x12\xea\xd0\xa7\x14" - "\xf0\x7a\xf3\xd5\x8d\xbd\x81\xef" - "\x52\x7f\x29\x51\x94\x20\x67\x3c" - "\xd1\xaf\x77\x9f\x22\x5a\x4e\x63" - "\xe7\xff\x73\x25\xd1\xdd\x96\x8a" - "\x98\x52\x6d\xf3\xac\x3e\xf2\x18" - "\x6d\xf6\x0a\x29\xa6\x34\x3d\xed" - "\xe3\x27\x0d\x9d\x0a\x02\x44\x7e" - "\x5a\x7e\x67\x0f\x0a\x9e\xd6\xad" - "\x91\xe6\x4d\x81\x8c\x5c\x59\xaa" - "\xfb\xeb\x56\x53\xd2\x7d\x4c\x81" - "\x65\x53\x0f\x41\x11\xbd\x98\x99" - "\xf9\xc6\xfa\x51\x2e\xa3\xdd\x8d" - "\x84\x98\xf9\x34\xed\x33\x2a\x1f" - "\x82\xed\xc1\x73\x98\xd3\x02\xdc" - "\xe6\xc2\x33\x1d\xa2\xb4\xca\x76" - "\x63\x51\x34\x9d\x96\x12\xae\xce" - "\x83\xc9\x76\x5e\xa4\x1b\x53\x37" - "\x17\xd5\xc0\x80\x1d\x62\xf8\x3d" - "\x54\x27\x74\xbb\x10\x86\x57\x46" - "\x68\xe1\xed\x14\xe7\x9d\xfc\x84" - "\x47\xbc\xc2\xf8\x19\x4b\x99\xcf" - "\x7a\xe9\xc4\xb8\x8c\x82\x72\x4d" - "\x7b\x4f\x38\x55\x36\x71\x64\xc1" - "\xfc\x5c\x75\x52\x33\x02\x18\xf8" - "\x17\xe1\x2b\xc2\x43\x39\xbd\x76" - "\x9b\x63\x76\x32\x2f\x19\x72\x10" - "\x9f\x21\x0c\xf1\x66\x50\x7f\xa5" - "\x0d\x1f\x46\xe0\xba\xd3\x2f\x3c", - .len = 512, - .also_non_np = 1, - .np = 3, - .tap = { 512 - 20, 4, 16 }, - } -}; - /* Cast6 test vectors from RFC 2612 */ static const struct cipher_testvec cast6_tv_template[] = { { diff --git a/fs/crypto/fscrypt_private.h b/fs/crypto/fscrypt_private.h index 39c20ef26db4..79debfc9cef9 100644 --- a/fs/crypto/fscrypt_private.h +++ b/fs/crypto/fscrypt_private.h @@ -83,10 +83,6 @@ static inline bool fscrypt_valid_enc_modes(u32 contents_mode, filenames_mode == FS_ENCRYPTION_MODE_AES_256_CTS) return true; - if (contents_mode == FS_ENCRYPTION_MODE_SPECK128_256_XTS && - filenames_mode == FS_ENCRYPTION_MODE_SPECK128_256_CTS) - return true; - return false; } diff --git a/fs/crypto/keyinfo.c b/fs/crypto/keyinfo.c index e997ca51192f..7874c9bb2fc5 100644 --- a/fs/crypto/keyinfo.c +++ b/fs/crypto/keyinfo.c @@ -174,16 +174,6 @@ static struct fscrypt_mode { .cipher_str = "cts(cbc(aes))", .keysize = 16, }, - [FS_ENCRYPTION_MODE_SPECK128_256_XTS] = { - .friendly_name = "Speck128/256-XTS", - .cipher_str = "xts(speck128)", - .keysize = 64, - }, - [FS_ENCRYPTION_MODE_SPECK128_256_CTS] = { - .friendly_name = "Speck128/256-CTS-CBC", - .cipher_str = "cts(cbc(speck128))", - .keysize = 32, - }, }; static struct fscrypt_mode * diff --git a/include/crypto/speck.h b/include/crypto/speck.h deleted file mode 100644 index 73cfc952d405..000000000000 --- a/include/crypto/speck.h +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Common values for the Speck algorithm - */ - -#ifndef _CRYPTO_SPECK_H -#define _CRYPTO_SPECK_H - -#include <linux/types.h> - -/* Speck128 */ - -#define SPECK128_BLOCK_SIZE 16 - -#define SPECK128_128_KEY_SIZE 16 -#define SPECK128_128_NROUNDS 32 - -#define SPECK128_192_KEY_SIZE 24 -#define SPECK128_192_NROUNDS 33 - -#define SPECK128_256_KEY_SIZE 32 -#define SPECK128_256_NROUNDS 34 - -struct speck128_tfm_ctx { - u64 round_keys[SPECK128_256_NROUNDS]; - int nrounds; -}; - -void crypto_speck128_encrypt(const struct speck128_tfm_ctx *ctx, - u8 *out, const u8 *in); - -void crypto_speck128_decrypt(const struct speck128_tfm_ctx *ctx, - u8 *out, const u8 *in); - -int crypto_speck128_setkey(struct speck128_tfm_ctx *ctx, const u8 *key, - unsigned int keysize); - -/* Speck64 */ - -#define SPECK64_BLOCK_SIZE 8 - -#define SPECK64_96_KEY_SIZE 12 -#define SPECK64_96_NROUNDS 26 - -#define SPECK64_128_KEY_SIZE 16 -#define SPECK64_128_NROUNDS 27 - -struct speck64_tfm_ctx { - u32 round_keys[SPECK64_128_NROUNDS]; - int nrounds; -}; - -void crypto_speck64_encrypt(const struct speck64_tfm_ctx *ctx, - u8 *out, const u8 *in); - -void crypto_speck64_decrypt(const struct speck64_tfm_ctx *ctx, - u8 *out, const u8 *in); - -int crypto_speck64_setkey(struct speck64_tfm_ctx *ctx, const u8 *key, - unsigned int keysize); - -#endif /* _CRYPTO_SPECK_H */ diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 73e01918f996..9d132f8f2df8 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -279,8 +279,6 @@ struct fsxattr { #define FS_ENCRYPTION_MODE_AES_256_CTS 4 #define FS_ENCRYPTION_MODE_AES_128_CBC 5 #define FS_ENCRYPTION_MODE_AES_128_CTS 6 -#define FS_ENCRYPTION_MODE_SPECK128_256_XTS 7 -#define FS_ENCRYPTION_MODE_SPECK128_256_CTS 8 struct fscrypt_policy { __u8 version; -- 2.18.0

6 years, 8 months

6
10
0 0

[PATCH 1/2] ext4: fix online resize's handling of a too-small final block group

by Theodore Ts'o

Avoid growing the file system to an extent so that the last block group is too small to hold all of the metadata that must be stored in the block group. This problem can be triggered with the following reproducer: umount /mnt mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \ -E resize=1073741824 /tmp/foo.img 128M mount /tmp/foo.img /mnt truncate --size 1708M /tmp/foo.img resize2fs /dev/loop0 295400 umount /mnt e2fsck -fy /tmp/foo.img Reported-by: Torsten Hilbrich <torsten.hilbrich(a)secunet.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)vger.kernel.org --- fs/ext4/resize.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index e5fb38451a73..33655a6eff4d 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1986,6 +1986,26 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count) } } + /* + * Make sure the last group has enough space so that it's + * guaranteed to have enough space for all metadata blocks + * that it might need to hold. (We might not need to store + * the inode table blocks in the last block group, but there + * will be cases where this might be needed.) + */ + if ((ext4_group_first_block_no(sb, n_group) + + ext4_group_overhead_blocks(sb, n_group) + 2 + + sbi->s_itb_per_group + sbi->s_cluster_ratio) >= n_blocks_count) { + n_blocks_count = ext4_group_first_block_no(sb, n_group); + n_group--; + n_blocks_count_retry = 0; + if (resize_inode) { + iput(resize_inode); + resize_inode = NULL; + } + goto retry; + } + /* extend the last group */ if (n_group == o_group) add = n_blocks_count - o_blocks_count; -- 2.18.0.rc0

6 years, 8 months

1
1
0 0

+ mm-disable-deferred-struct-page-for-32-bit-arches.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm: disable deferred struct page for 32-bit arches has been added to the -mm tree. Its filename is mm-disable-deferred-struct-page-for-32-bit-arches.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-disable-deferred-struct-page-fo… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-disable-deferred-struct-page-fo… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Pasha Tatashin <Pavel.Tatashin(a)microsoft.com> Subject: mm: disable deferred struct page for 32-bit arches Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin <pavel.tatashin(a)microsoft.com> Reported-by: Jiri Slaby <jslaby(a)suse.cz> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches mm/Kconfig --- a/mm/Kconfig~mm-disable-deferred-struct-page-for-32-bit-arches +++ a/mm/Kconfig @@ -637,6 +637,7 @@ config DEFERRED_STRUCT_PAGE_INIT depends on NO_BOOTMEM depends on SPARSEMEM depends on !NEED_PER_CPU_KM + depends on 64BIT help Ordinarily all struct pages are initialised during early boot in a single thread. On very large machines this can take a considerable _ Patches currently in -mm which might be from Pavel.Tatashin(a)microsoft.com are mm-disable-deferred-struct-page-for-32-bit-arches.patch

6 years, 8 months

1
0
0 0

request for 4.14-stable: c82b7623edd7 ("gcc-plugins: Add include required by GCC release 8")

by Lance Albertson

Hi Greg, I was trying to compile 4.14.67 using GCC 8.2.0 with gcc-plugins enabled and ran into this issue [1]. If I applied both of the commits mentioned, it resolved the problem so I think it should be included in 4.14. Thanks! [1] https://groups.google.com/forum/#!msg/qubes-devel/Q3cdQKQS4Tk/gKr4F52HAAAJ -- Lance Albertson Director Oregon State University | Open Source Lab --- From c82b7623edd74a57fffd69dbab25d180c3b16c6f Mon Sep 17 00:00:00 2001 From: "valdis.kletnieks(a)vt.edu" <valdis.kletnieks(a)vt.edu> Date: Sun, 4 Feb 2018 12:01:43 -0500 Subject: [PATCH 2/2] gcc-plugins: Add include required by GCC release 8 GCC requires another #include to get the gcc-plugins to build cleanly. Signed-off-by: Valdis Kletnieks <valdis.kletnieks(a)vt.edu> Signed-off-by: Kees Cook <keescook(a)chromium.org> --- scripts/gcc-plugins/gcc-common.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/gcc-plugins/gcc-common.h b/scripts/gcc-plugins/gcc-common.h index ffd1dfaa1cc1..f46750053377 100644 --- a/scripts/gcc-plugins/gcc-common.h +++ b/scripts/gcc-plugins/gcc-common.h @@ -97,6 +97,10 @@ #include "predict.h" #include "ipa-utils.h" +#if BUILDING_GCC_VERSION >= 8000 +#include "stringpool.h" +#endif + #if BUILDING_GCC_VERSION >= 4009 #include "attribs.h" #include "varasm.h" -- Lance Albertson Director Oregon State University | Open Source Lab

6 years, 8 months

2
2
0 0

request for 4.14-stable: 93b3623ada15 ("gcc-plugins: Use dynamic initializers")

by Lance Albertson

Hi Greg, I was trying to compile 4.14.67 using GCC 8.2.0 with gcc-plugins enabled and ran into this issue [1]. If I applied both of the commits mentioned, it resolved the problem so I think it should be included in 4.14. Thanks! [1] https://groups.google.com/forum/#!msg/qubes-devel/Q3cdQKQS4Tk/gKr4F52HAAAJ -- Lance Albertson Director Oregon State University | Open Source Lab --- From 93b3623ada1582379833ea442fbc7b15e6417fbc Mon Sep 17 00:00:00 2001 From: Kees Cook <keescook(a)chromium.org> Date: Mon, 5 Feb 2018 17:27:46 -0800 Subject: [PATCH 1/2] gcc-plugins: Use dynamic initializers GCC 8 changed the order of some fields and is very picky about ordering in static initializers, so instead just move to dynamic initializers, and drop the redundant already-zero field assignments. Suggested-by: Valdis Kletnieks <valdis.kletnieks(a)vt.edu> Signed-off-by: Kees Cook <keescook(a)chromium.org> --- scripts/gcc-plugins/latent_entropy_plugin.c | 17 ++---- scripts/gcc-plugins/randomize_layout_plugin.c | 75 ++++++++------------------- scripts/gcc-plugins/structleak_plugin.c | 19 +++---- 3 files changed, 33 insertions(+), 78 deletions(-) diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index 65264960910d..cbe1d6c4b1a5 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -255,21 +255,14 @@ static tree handle_latent_entropy_attribute(tree *node, tree name, return NULL_TREE; } -static struct attribute_spec latent_entropy_attr = { - .name = "latent_entropy", - .min_length = 0, - .max_length = 0, - .decl_required = true, - .type_required = false, - .function_type_required = false, - .handler = handle_latent_entropy_attribute, -#if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = false -#endif -}; +static struct attribute_spec latent_entropy_attr = { }; static void register_attributes(void *event_data __unused, void *data __unused) { + latent_entropy_attr.name = "latent_entropy"; + latent_entropy_attr.decl_required = true; + latent_entropy_attr.handler = handle_latent_entropy_attribute; + register_attribute(&latent_entropy_attr); } diff --git a/scripts/gcc-plugins/randomize_layout_plugin.c b/scripts/gcc-plugins/randomize_layout_plugin.c index 0073af326449..c4a345c3715b 100644 --- a/scripts/gcc-plugins/randomize_layout_plugin.c +++ b/scripts/gcc-plugins/randomize_layout_plugin.c @@ -580,68 +580,35 @@ static void finish_type(void *event_data, void *data) return; } -static struct attribute_spec randomize_layout_attr = { - .name = "randomize_layout", - // related to args - .min_length = 0, - .max_length = 0, - .decl_required = false, - // need type declaration - .type_required = true, - .function_type_required = false, - .handler = handle_randomize_layout_attr, -#if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = true -#endif -}; +static struct attribute_spec randomize_layout_attr = { }; +static struct attribute_spec no_randomize_layout_attr = { }; +static struct attribute_spec randomize_considered_attr = { }; +static struct attribute_spec randomize_performed_attr = { }; -static struct attribute_spec no_randomize_layout_attr = { - .name = "no_randomize_layout", - // related to args - .min_length = 0, - .max_length = 0, - .decl_required = false, - // need type declaration - .type_required = true, - .function_type_required = false, - .handler = handle_randomize_layout_attr, +static void register_attributes(void *event_data, void *data) +{ + randomize_layout_attr.name = "randomize_layout"; + randomize_layout_attr.type_required = true; + randomize_layout_attr.handler = handle_randomize_layout_attr; #if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = true + randomize_layout_attr.affects_type_identity = true; #endif -}; -static struct attribute_spec randomize_considered_attr = { - .name = "randomize_considered", - // related to args - .min_length = 0, - .max_length = 0, - .decl_required = false, - // need type declaration - .type_required = true, - .function_type_required = false, - .handler = handle_randomize_considered_attr, + no_randomize_layout_attr.name = "no_randomize_layout"; + no_randomize_layout_attr.type_required = true; + no_randomize_layout_attr.handler = handle_randomize_layout_attr; #if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = false + no_randomize_layout_attr.affects_type_identity = true; #endif -}; -static struct attribute_spec randomize_performed_attr = { - .name = "randomize_performed", - // related to args - .min_length = 0, - .max_length = 0, - .decl_required = false, - // need type declaration - .type_required = true, - .function_type_required = false, - .handler = handle_randomize_performed_attr, -#if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = false -#endif -}; + randomize_considered_attr.name = "randomize_considered"; + randomize_considered_attr.type_required = true; + randomize_considered_attr.handler = handle_randomize_considered_attr; + + randomize_performed_attr.name = "randomize_performed"; + randomize_performed_attr.type_required = true; + randomize_performed_attr.handler = handle_randomize_performed_attr; -static void register_attributes(void *event_data, void *data) -{ register_attribute(&randomize_layout_attr); register_attribute(&no_randomize_layout_attr); register_attribute(&randomize_considered_attr); diff --git a/scripts/gcc-plugins/structleak_plugin.c b/scripts/gcc-plugins/structleak_plugin.c index 3f8dd4868178..10292f791e99 100644 --- a/scripts/gcc-plugins/structleak_plugin.c +++ b/scripts/gcc-plugins/structleak_plugin.c @@ -57,21 +57,16 @@ static tree handle_user_attribute(tree *node, tree name, tree args, int flags, b return NULL_TREE; } -static struct attribute_spec user_attr = { - .name = "user", - .min_length = 0, - .max_length = 0, - .decl_required = false, - .type_required = false, - .function_type_required = false, - .handler = handle_user_attribute, -#if BUILDING_GCC_VERSION >= 4007 - .affects_type_identity = true -#endif -}; +static struct attribute_spec user_attr = { }; static void register_attributes(void *event_data, void *data) { + user_attr.name = "user"; + user_attr.handler = handle_user_attribute; +#if BUILDING_GCC_VERSION >= 4007 + user_attr.affects_type_identity = true; +#endif + register_attribute(&user_attr); } -- Lance Albertson Director Oregon State University | Open Source Lab

6 years, 8 months

2
2
0 0

[PATCH] staging: android: ion: check for kref overflow

by Daniel Rosenberg

This patch is against 4.9. It does not apply to master due to a large rework of ion in 4.12 which removed the affected functions altogther. 4c23cbff073f3b9b ("staging: android: ion: Remove import interface") Userspace can cause the kref to handles to increment arbitrarily high. Ensure it does not overflow. Signed-off-by: Daniel Rosenberg <drosen(a)google.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/android/ion/ion.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c index 6f9974cb0e152..48821948fa487 100644 --- a/drivers/staging/android/ion/ion.c +++ b/drivers/staging/android/ion/ion.c @@ -15,6 +15,7 @@ * */ +#include <linux/atomic.h> #include <linux/device.h> #include <linux/err.h> #include <linux/file.h> @@ -305,6 +306,16 @@ static void ion_handle_get(struct ion_handle *handle) kref_get(&handle->ref); } +/* Must hold the client lock */ +static struct ion_handle *ion_handle_get_check_overflow( + struct ion_handle *handle) +{ + if (atomic_read(&handle->ref.refcount) + 1 == 0) + return ERR_PTR(-EOVERFLOW); + ion_handle_get(handle); + return handle; +} + int ion_handle_put_nolock(struct ion_handle *handle) { return kref_put(&handle->ref, ion_handle_destroy); @@ -347,9 +358,9 @@ struct ion_handle *ion_handle_get_by_id_nolock(struct ion_client *client, handle = idr_find(&client->idr, id); if (handle) - ion_handle_get(handle); + return ion_handle_get_check_overflow(handle); - return handle ? handle : ERR_PTR(-EINVAL); + return ERR_PTR(-EINVAL); } struct ion_handle *ion_handle_get_by_id(struct ion_client *client, @@ -1100,7 +1111,7 @@ struct ion_handle *ion_import_dma_buf(struct ion_client *client, /* if a handle exists for this buffer just take a reference to it */ handle = ion_handle_lookup(client, buffer); if (!IS_ERR(handle)) { - ion_handle_get(handle); + handle = ion_handle_get_check_overflow(handle); mutex_unlock(&client->lock); goto end; } -- 2.19.0.rc0.228.g281dcd1b4d0-goog

6 years, 8 months

2
5
0 0

Applied "regulator: Fix 'do-nothing' value for regulators without suspend state" to the regulator tree

by Mark Brown

The patch regulator: Fix 'do-nothing' value for regulators without suspend state has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3edd79cf5a44b12dbb13bc320f5788aed6562b36 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski <m.szyprowski(a)samsung.com> Date: Mon, 3 Sep 2018 16:49:37 +0200 Subject: [PATCH] regulator: Fix 'do-nothing' value for regulators without suspend state Some regulators don't have all states defined and in such cases regulator core should not assume anything. However in current implementation of of_get_regulation_constraints() DO_NOTHING_IN_SUSPEND enable value was set only for regulators which had suspend node defined, otherwise the default 0 value was used, what means DISABLE_IN_SUSPEND. This lead to broken system suspend/resume on boards, which had simple regulator constraints definition (without suspend state nodes). To avoid further mismatches between the default and uninitialized values of the suspend enabled/disabled states, change the values of the them, so default '0' means DO_NOTHING_IN_SUSPEND. Fixes: 72069f9957a1: regulator: leave one item to record whether regulator is enabled Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/regulator/core.c | 2 +- drivers/regulator/of_regulator.c | 2 -- include/linux/regulator/machine.h | 6 +++--- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index bb1324f93143..90215f57270f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3161,7 +3161,7 @@ static inline int regulator_suspend_toggle(struct regulator_dev *rdev, if (!rstate->changeable) return -EPERM; - rstate->enabled = en; + rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND; return 0; } diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 638f17d4c848..210fc20f7de7 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -213,8 +213,6 @@ static void of_get_regulation_constraints(struct device_node *np, else if (of_property_read_bool(suspend_np, "regulator-off-in-suspend")) suspend_state->enabled = DISABLE_IN_SUSPEND; - else - suspend_state->enabled = DO_NOTHING_IN_SUSPEND; if (!of_property_read_u32(np, "regulator-suspend-min-microvolt", &pval)) diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 3468703d663a..a459a5e973a7 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -48,9 +48,9 @@ struct regulator; * DISABLE_IN_SUSPEND - turn off regulator in suspend states * ENABLE_IN_SUSPEND - keep regulator on in suspend states */ -#define DO_NOTHING_IN_SUSPEND (-1) -#define DISABLE_IN_SUSPEND 0 -#define ENABLE_IN_SUSPEND 1 +#define DO_NOTHING_IN_SUSPEND 0 +#define DISABLE_IN_SUSPEND 1 +#define ENABLE_IN_SUSPEND 2 /* Regulator active discharge flags */ enum regulator_active_discharge { -- 2.19.0.rc1

6 years, 8 months

1
0
0 0

[PATCH for 4.18.y] x86/dumpstack: Don't dump kernel memory based on usermode RIP

by Jann Horn

commit 342db04ae71273322f0011384a9ed414df8bdae4 upstream. show_opcodes() is used both for dumping kernel instructions and for dumping user instructions. If userspace causes #PF by jumping to a kernel address, show_opcodes() can be reached with regs->ip controlled by the user, pointing to kernel code. Make sure that userspace can't trick us into dumping kernel memory into dmesg. Manually backported: show_opcodes() has changed a bit in the meantime. I have manually tested the backport. Fixes: 7cccf0725cf7 ("x86/dumpstack: Add a show_ip() function") Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/20180828154901.112726-1-jannh@google.com Signed-off-by: Jann Horn <jannh(a)google.com> --- Since I manually backported this, I have removed all other sign-off/reviewed-by lines. I hope that's correct? arch/x86/include/asm/stacktrace.h | 2 +- arch/x86/kernel/dumpstack.c | 21 +++++++++++++++------ arch/x86/mm/fault.c | 2 +- 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index b6dc698f992a..f335aad404a4 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -111,6 +111,6 @@ static inline unsigned long caller_frame_pointer(void) return (unsigned long)frame; } -void show_opcodes(u8 *rip, const char *loglvl); +void show_opcodes(struct pt_regs *regs, const char *loglvl); void show_ip(struct pt_regs *regs, const char *loglvl); #endif /* _ASM_X86_STACKTRACE_H */ diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 666a284116ac..1c65c648cacc 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -91,23 +91,32 @@ static void printk_stack_address(unsigned long address, int reliable, * Thus, the 2/3rds prologue and 64 byte OPCODE_BUFSIZE is just a random * guesstimate in attempt to achieve all of the above. */ -void show_opcodes(u8 *rip, const char *loglvl) +void show_opcodes(struct pt_regs *regs, const char *loglvl) { unsigned int code_prologue = OPCODE_BUFSIZE * 2 / 3; u8 opcodes[OPCODE_BUFSIZE]; - u8 *ip; + unsigned long ip; int i; + bool bad_ip; printk("%sCode: ", loglvl); - ip = (u8 *)rip - code_prologue; - if (probe_kernel_read(opcodes, ip, OPCODE_BUFSIZE)) { + ip = regs->ip - code_prologue; + + /* + * Make sure userspace isn't trying to trick us into dumping kernel + * memory by pointing the userspace instruction pointer at it. + */ + bad_ip = user_mode(regs) && + __chk_range_not_ok(ip, OPCODE_BUFSIZE, TASK_SIZE_MAX); + + if (bad_ip || probe_kernel_read(opcodes, (u8 *)ip, OPCODE_BUFSIZE)) { pr_cont("Bad RIP value.\n"); return; } for (i = 0; i < OPCODE_BUFSIZE; i++, ip++) { - if (ip == rip) + if (ip == regs->ip) pr_cont("<%02x> ", opcodes[i]); else pr_cont("%02x ", opcodes[i]); @@ -122,7 +131,7 @@ void show_ip(struct pt_regs *regs, const char *loglvl) #else printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip); #endif - show_opcodes((u8 *)regs->ip, loglvl); + show_opcodes(regs, loglvl); } void show_iret_regs(struct pt_regs *regs) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 2aafa6ab6103..d1f1612672c7 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -838,7 +838,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code, printk(KERN_CONT "\n"); - show_opcodes((u8 *)regs->ip, loglvl); + show_opcodes(regs, loglvl); } static void -- 2.19.0.rc1.350.ge57e33dbd1-goog

6 years, 8 months

2
1
0 0

FAILED: patch "[PATCH] s390/lib: use expoline for all bcr instructions" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 5eda25b10297684c1f46a14199ec00210f3c346e Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Date: Mon, 6 Aug 2018 13:49:47 +0200 Subject: [PATCH] s390/lib: use expoline for all bcr instructions The memove, memset, memcpy, __memset16, __memset32 and __memset64 function have an additional indirect return branch in form of a "bzr" instruction. These need to use expolines as well. Cc: <stable(a)vger.kernel.org> # v4.17+ Fixes: 97489e0663 ("s390/lib: use expoline for indirect branches") Reviewed-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> diff --git a/arch/s390/lib/mem.S b/arch/s390/lib/mem.S index 2311f15be9cf..40c4d59c926e 100644 --- a/arch/s390/lib/mem.S +++ b/arch/s390/lib/mem.S @@ -17,7 +17,7 @@ ENTRY(memmove) ltgr %r4,%r4 lgr %r1,%r2 - bzr %r14 + jz .Lmemmove_exit aghi %r4,-1 clgr %r2,%r3 jnh .Lmemmove_forward @@ -36,6 +36,7 @@ ENTRY(memmove) .Lmemmove_forward_remainder: larl %r5,.Lmemmove_mvc ex %r4,0(%r5) +.Lmemmove_exit: BR_EX %r14 .Lmemmove_reverse: ic %r0,0(%r4,%r3) @@ -65,7 +66,7 @@ EXPORT_SYMBOL(memmove) */ ENTRY(memset) ltgr %r4,%r4 - bzr %r14 + jz .Lmemset_exit ltgr %r3,%r3 jnz .Lmemset_fill aghi %r4,-1 @@ -80,6 +81,7 @@ ENTRY(memset) .Lmemset_clear_remainder: larl %r3,.Lmemset_xc ex %r4,0(%r3) +.Lmemset_exit: BR_EX %r14 .Lmemset_fill: cghi %r4,1 @@ -115,7 +117,7 @@ EXPORT_SYMBOL(memset) */ ENTRY(memcpy) ltgr %r4,%r4 - bzr %r14 + jz .Lmemcpy_exit aghi %r4,-1 srlg %r5,%r4,8 ltgr %r5,%r5 @@ -124,6 +126,7 @@ ENTRY(memcpy) .Lmemcpy_remainder: larl %r5,.Lmemcpy_mvc ex %r4,0(%r5) +.Lmemcpy_exit: BR_EX %r14 .Lmemcpy_loop: mvc 0(256,%r1),0(%r3) @@ -145,9 +148,9 @@ EXPORT_SYMBOL(memcpy) .macro __MEMSET bits,bytes,insn ENTRY(__memset\bits) ltgr %r4,%r4 - bzr %r14 + jz .L__memset_exit\bits cghi %r4,\bytes - je .L__memset_exit\bits + je .L__memset_store\bits aghi %r4,-(\bytes+1) srlg %r5,%r4,8 ltgr %r5,%r5 @@ -163,8 +166,9 @@ ENTRY(__memset\bits) larl %r5,.L__memset_mvc\bits ex %r4,0(%r5) BR_EX %r14 -.L__memset_exit\bits: +.L__memset_store\bits: \insn %r3,0(%r2) +.L__memset_exit\bits: BR_EX %r14 .L__memset_mvc\bits: mvc \bytes(1,%r1),0(%r1)

6 years, 8 months

2
1
0 0

FAILED: patch "[PATCH] s390/lib: use expoline for all bcr instructions" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 5eda25b10297684c1f46a14199ec00210f3c346e Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Date: Mon, 6 Aug 2018 13:49:47 +0200 Subject: [PATCH] s390/lib: use expoline for all bcr instructions The memove, memset, memcpy, __memset16, __memset32 and __memset64 function have an additional indirect return branch in form of a "bzr" instruction. These need to use expolines as well. Cc: <stable(a)vger.kernel.org> # v4.17+ Fixes: 97489e0663 ("s390/lib: use expoline for indirect branches") Reviewed-by: Heiko Carstens <heiko.carstens(a)de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky(a)de.ibm.com> diff --git a/arch/s390/lib/mem.S b/arch/s390/lib/mem.S index 2311f15be9cf..40c4d59c926e 100644 --- a/arch/s390/lib/mem.S +++ b/arch/s390/lib/mem.S @@ -17,7 +17,7 @@ ENTRY(memmove) ltgr %r4,%r4 lgr %r1,%r2 - bzr %r14 + jz .Lmemmove_exit aghi %r4,-1 clgr %r2,%r3 jnh .Lmemmove_forward @@ -36,6 +36,7 @@ ENTRY(memmove) .Lmemmove_forward_remainder: larl %r5,.Lmemmove_mvc ex %r4,0(%r5) +.Lmemmove_exit: BR_EX %r14 .Lmemmove_reverse: ic %r0,0(%r4,%r3) @@ -65,7 +66,7 @@ EXPORT_SYMBOL(memmove) */ ENTRY(memset) ltgr %r4,%r4 - bzr %r14 + jz .Lmemset_exit ltgr %r3,%r3 jnz .Lmemset_fill aghi %r4,-1 @@ -80,6 +81,7 @@ ENTRY(memset) .Lmemset_clear_remainder: larl %r3,.Lmemset_xc ex %r4,0(%r3) +.Lmemset_exit: BR_EX %r14 .Lmemset_fill: cghi %r4,1 @@ -115,7 +117,7 @@ EXPORT_SYMBOL(memset) */ ENTRY(memcpy) ltgr %r4,%r4 - bzr %r14 + jz .Lmemcpy_exit aghi %r4,-1 srlg %r5,%r4,8 ltgr %r5,%r5 @@ -124,6 +126,7 @@ ENTRY(memcpy) .Lmemcpy_remainder: larl %r5,.Lmemcpy_mvc ex %r4,0(%r5) +.Lmemcpy_exit: BR_EX %r14 .Lmemcpy_loop: mvc 0(256,%r1),0(%r3) @@ -145,9 +148,9 @@ EXPORT_SYMBOL(memcpy) .macro __MEMSET bits,bytes,insn ENTRY(__memset\bits) ltgr %r4,%r4 - bzr %r14 + jz .L__memset_exit\bits cghi %r4,\bytes - je .L__memset_exit\bits + je .L__memset_store\bits aghi %r4,-(\bytes+1) srlg %r5,%r4,8 ltgr %r5,%r5 @@ -163,8 +166,9 @@ ENTRY(__memset\bits) larl %r5,.L__memset_mvc\bits ex %r4,0(%r5) BR_EX %r14 -.L__memset_exit\bits: +.L__memset_store\bits: \insn %r3,0(%r2) +.L__memset_exit\bits: BR_EX %r14 .L__memset_mvc\bits: mvc \bytes(1,%r1),0(%r1)

6 years, 8 months

2
1
0 0

Applied "spi: tegra20-slink: explicitly enable/disable clock" to the spi tree

by Mark Brown

The patch spi: tegra20-slink: explicitly enable/disable clock has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 7001cab1dabc0b72b2b672ef58a90ab64f5e2343 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Date: Wed, 29 Aug 2018 08:47:57 +0200 Subject: [PATCH] spi: tegra20-slink: explicitly enable/disable clock Depending on the SPI instance one may get an interrupt storm upon requesting resp. interrupt unless the clock is explicitly enabled beforehand. This has been observed trying to bring up instance 4 on T20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- drivers/spi/spi-tegra20-slink.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 6f7b946b5ced..1427f343b39a 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1063,6 +1063,24 @@ static int tegra_slink_probe(struct platform_device *pdev) goto exit_free_master; } + /* disabled clock may cause interrupt storm upon request */ + tspi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(tspi->clk)) { + ret = PTR_ERR(tspi->clk); + dev_err(&pdev->dev, "Can not get clock %d\n", ret); + goto exit_free_master; + } + ret = clk_prepare(tspi->clk); + if (ret < 0) { + dev_err(&pdev->dev, "Clock prepare failed %d\n", ret); + goto exit_free_master; + } + ret = clk_enable(tspi->clk); + if (ret < 0) { + dev_err(&pdev->dev, "Clock enable failed %d\n", ret); + goto exit_free_master; + } + spi_irq = platform_get_irq(pdev, 0); tspi->irq = spi_irq; ret = request_threaded_irq(tspi->irq, tegra_slink_isr, @@ -1071,14 +1089,7 @@ static int tegra_slink_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", tspi->irq); - goto exit_free_master; - } - - tspi->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(tspi->clk)) { - dev_err(&pdev->dev, "can not get clock\n"); - ret = PTR_ERR(tspi->clk); - goto exit_free_irq; + goto exit_clk_disable; } tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi"); @@ -1138,6 +1149,8 @@ static int tegra_slink_probe(struct platform_device *pdev) tegra_slink_deinit_dma_param(tspi, true); exit_free_irq: free_irq(spi_irq, tspi); +exit_clk_disable: + clk_disable(tspi->clk); exit_free_master: spi_master_put(master); return ret; @@ -1150,6 +1163,8 @@ static int tegra_slink_remove(struct platform_device *pdev) free_irq(tspi->irq, tspi); + clk_disable(tspi->clk); + if (tspi->tx_dma_chan) tegra_slink_deinit_dma_param(tspi, false); -- 2.19.0.rc1

6 years, 8 months

1
0
0 0

Applied "ASoC: rsnd: fixup not to call clk_get/set under non-atomic" to the asoc tree

by Mark Brown

The patch ASoC: rsnd: fixup not to call clk_get/set under non-atomic has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 4d230d12710646788af581ba0155d83ab48b955c Mon Sep 17 00:00:00 2001 From: Jiada Wang <jiada_wang(a)mentor.com> Date: Mon, 3 Sep 2018 07:08:58 +0000 Subject: [PATCH] ASoC: rsnd: fixup not to call clk_get/set under non-atomic Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang(a)mentor.com> Signed-off-by: Timo Wischer <twischer(a)de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- sound/soc/sh/rcar/core.c | 11 +++++++++++ sound/soc/sh/rcar/rsnd.h | 7 +++++++ sound/soc/sh/rcar/ssi.c | 16 ++++++++++------ 3 files changed, 28 insertions(+), 6 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index f8425d8b44d2..b35f5509cfe2 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -958,12 +958,23 @@ static void rsnd_soc_dai_shutdown(struct snd_pcm_substream *substream, rsnd_dai_stream_quit(io); } +static int rsnd_soc_dai_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct rsnd_priv *priv = rsnd_dai_to_priv(dai); + struct rsnd_dai *rdai = rsnd_dai_to_rdai(dai); + struct rsnd_dai_stream *io = rsnd_rdai_to_io(rdai, substream); + + return rsnd_dai_call(prepare, io, priv); +} + static const struct snd_soc_dai_ops rsnd_soc_dai_ops = { .startup = rsnd_soc_dai_startup, .shutdown = rsnd_soc_dai_shutdown, .trigger = rsnd_soc_dai_trigger, .set_fmt = rsnd_soc_dai_set_fmt, .set_tdm_slot = rsnd_soc_set_dai_tdm_slot, + .prepare = rsnd_soc_dai_prepare, }; void rsnd_parse_connect_common(struct rsnd_dai *rdai, diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index 96d93330b1e1..8f7a0abfa751 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -280,6 +280,9 @@ struct rsnd_mod_ops { int (*nolock_stop)(struct rsnd_mod *mod, struct rsnd_dai_stream *io, struct rsnd_priv *priv); + int (*prepare)(struct rsnd_mod *mod, + struct rsnd_dai_stream *io, + struct rsnd_priv *priv); }; struct rsnd_dai_stream; @@ -309,6 +312,7 @@ struct rsnd_mod { * H 0: fallback * H 0: hw_params * H 0: pointer + * H 0: prepare */ #define __rsnd_mod_shift_nolock_start 0 #define __rsnd_mod_shift_nolock_stop 0 @@ -323,6 +327,7 @@ struct rsnd_mod { #define __rsnd_mod_shift_fallback 28 /* always called */ #define __rsnd_mod_shift_hw_params 28 /* always called */ #define __rsnd_mod_shift_pointer 28 /* always called */ +#define __rsnd_mod_shift_prepare 28 /* always called */ #define __rsnd_mod_add_probe 0 #define __rsnd_mod_add_remove 0 @@ -337,6 +342,7 @@ struct rsnd_mod { #define __rsnd_mod_add_fallback 0 #define __rsnd_mod_add_hw_params 0 #define __rsnd_mod_add_pointer 0 +#define __rsnd_mod_add_prepare 0 #define __rsnd_mod_call_probe 0 #define __rsnd_mod_call_remove 0 @@ -351,6 +357,7 @@ struct rsnd_mod { #define __rsnd_mod_call_pointer 0 #define __rsnd_mod_call_nolock_start 0 #define __rsnd_mod_call_nolock_stop 1 +#define __rsnd_mod_call_prepare 0 #define rsnd_mod_to_priv(mod) ((mod)->priv) #define rsnd_mod_name(mod) ((mod)->ops->name) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 8304e4ec9242..3f880ec66459 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -283,7 +283,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, if (rsnd_ssi_is_multi_slave(mod, io)) return 0; - if (ssi->usrcnt > 1) { + if (ssi->rate) { if (ssi->rate != rate) { dev_err(dev, "SSI parent/child should use same rate\n"); return -EINVAL; @@ -434,7 +434,6 @@ static int rsnd_ssi_init(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); - int ret; if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -443,10 +442,6 @@ static int rsnd_ssi_init(struct rsnd_mod *mod, rsnd_mod_power_on(mod); - ret = rsnd_ssi_master_clk_start(mod, io); - if (ret < 0) - return ret; - rsnd_ssi_config_init(mod, io); rsnd_ssi_register_setup(mod); @@ -852,6 +847,13 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod, return 0; } +static int rsnd_ssi_prepare(struct rsnd_mod *mod, + struct rsnd_dai_stream *io, + struct rsnd_priv *priv) +{ + return rsnd_ssi_master_clk_start(mod, io); +} + static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .name = SSI_NAME, .probe = rsnd_ssi_common_probe, @@ -864,6 +866,7 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .pointer = rsnd_ssi_pio_pointer, .pcm_new = rsnd_ssi_pcm_new, .hw_params = rsnd_ssi_hw_params, + .prepare = rsnd_ssi_prepare, }; static int rsnd_ssi_dma_probe(struct rsnd_mod *mod, @@ -940,6 +943,7 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = { .pcm_new = rsnd_ssi_pcm_new, .fallback = rsnd_ssi_fallback, .hw_params = rsnd_ssi_hw_params, + .prepare = rsnd_ssi_prepare, }; int rsnd_ssi_is_dma_mode(struct rsnd_mod *mod) -- 2.19.0.rc1

6 years, 8 months

1
0
0 0

[PATCH AUTOSEL 4.4 01/47] misc: mic: SCIF Fix scif_get_new_port() error handling

by Sasha Levin

From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/misc/mic/scif/scif_api.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/misc/mic/scif/scif_api.c b/drivers/misc/mic/scif/scif_api.c index ddc9e4b08b5c..56efa9d18a9a 100644 --- a/drivers/misc/mic/scif/scif_api.c +++ b/drivers/misc/mic/scif/scif_api.c @@ -370,11 +370,10 @@ int scif_bind(scif_epd_t epd, u16 pn) goto scif_bind_exit; } } else { - pn = scif_get_new_port(); - if (!pn) { - ret = -ENOSPC; + ret = scif_get_new_port(); + if (ret < 0) goto scif_bind_exit; - } + pn = ret; } ep->state = SCIFEP_BOUND; @@ -648,13 +647,12 @@ int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block) err = -EISCONN; break; case SCIFEP_UNBOUND: - ep->port.port = scif_get_new_port(); - if (!ep->port.port) { - err = -ENOSPC; - } else { - ep->port.node = scif_info.nodeid; - ep->conn_async_state = ASYNC_CONN_IDLE; - } + err = scif_get_new_port(); + if (err < 0) + break; + ep->port.port = err; + ep->port.node = scif_info.nodeid; + ep->conn_async_state = ASYNC_CONN_IDLE; /* Fall through */ case SCIFEP_BOUND: /* -- 2.17.1

6 years, 8 months

2
47
0 0

[PATCH] Revert "ARM: imx_v6_v7_defconfig: Select ULPI support"

by Fabio Estevam

From: Fabio Estevam <fabio.estevam(a)nxp.com> This reverts commit 0d0af17ae83d6feb29d676c72423461419df5110. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable(a)vger.kernel.org> #4.4 Reported-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index b3490c1..4187f69 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -261,7 +261,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=m @@ -288,7 +287,6 @@ CONFIG_USB_G_NCM=m CONFIG_USB_GADGETFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y -- 2.7.4

6 years, 8 months

1
0
0 0

[PATCH] Revert "ARM: imx_v6_v7_defconfig: Select ULPI support"

by Fabio Estevam

From: Fabio Estevam <fabio.estevam(a)nxp.com> This reverts commit 721476147fd2571309b6aa6daa695b39170602ef. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable(a)vger.kernel.org> #4.9 Reported-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6b7d4f5..8ec4dbb 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -271,7 +271,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=m @@ -308,7 +307,6 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FUNCTIONFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y -- 2.7.4

6 years, 8 months

1
0
0 0

[PATCH] Revert "ARM: imx_v6_v7_defconfig: Select ULPI support"

by Fabio Estevam

From: Fabio Estevam <fabio.estevam(a)nxp.com> This reverts commit 2059e527a659cf16d6bb709f1c8509f7a7623fc4. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable(a)vger.kernel.org> #4.14 Reported-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- arch/arm/configs/imx_v6_v7_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 21ac9f0..32acac9 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -289,7 +289,6 @@ CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_FTDI_SIO=m @@ -326,7 +325,6 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FUNCTIONFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI_BUS=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y -- 2.7.4

6 years, 8 months

1
0
0 0

[PATCH v2 02/10] usb: roles: Handle driver reference counting

by Heikki Krogerus

This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: <stable(a)vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> --- drivers/usb/common/roles.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/common/roles.c b/drivers/usb/common/roles.c index 15cc76e22123..3d8a776e55ee 100644 --- a/drivers/usb/common/roles.c +++ b/drivers/usb/common/roles.c @@ -109,8 +109,15 @@ static void *usb_role_switch_match(struct device_connection *con, int ep, */ struct usb_role_switch *usb_role_switch_get(struct device *dev) { - return device_connection_find_match(dev, "usb-role-switch", NULL, - usb_role_switch_match); + struct usb_role_switch *sw; + + sw = device_connection_find_match(dev, "usb-role-switch", NULL, + usb_role_switch_match); + + if (!IS_ERR(sw)) + WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); + + return sw; } EXPORT_SYMBOL_GPL(usb_role_switch_get); @@ -122,8 +129,10 @@ EXPORT_SYMBOL_GPL(usb_role_switch_get); */ void usb_role_switch_put(struct usb_role_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { put_device(&sw->dev); + module_put(sw->dev.parent->driver->owner); + } } EXPORT_SYMBOL_GPL(usb_role_switch_put); -- 2.18.0

6 years, 8 months

1
0
0 0

[PATCH v2 01/10] usb: typec: Take care of driver module reference counting

by Heikki Krogerus

Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Cc: <stable(a)vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> --- drivers/usb/typec/mux.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index ddaac63ecf12..d990aa510fab 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -9,6 +9,7 @@ #include <linux/device.h> #include <linux/list.h> +#include <linux/module.h> #include <linux/mutex.h> #include <linux/usb/typec_mux.h> @@ -49,8 +50,10 @@ struct typec_switch *typec_switch_get(struct device *dev) mutex_lock(&switch_lock); sw = device_connection_find_match(dev, "typec-switch", NULL, typec_switch_match); - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { + WARN_ON(!try_module_get(sw->dev->driver->owner)); get_device(sw->dev); + } mutex_unlock(&switch_lock); return sw; @@ -65,8 +68,10 @@ EXPORT_SYMBOL_GPL(typec_switch_get); */ void typec_switch_put(struct typec_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { + module_put(sw->dev->driver->owner); put_device(sw->dev); + } } EXPORT_SYMBOL_GPL(typec_switch_put); @@ -136,8 +141,10 @@ struct typec_mux *typec_mux_get(struct device *dev, const char *name) mutex_lock(&mux_lock); mux = device_connection_find_match(dev, name, NULL, typec_mux_match); - if (!IS_ERR_OR_NULL(mux)) + if (!IS_ERR_OR_NULL(mux)) { + WARN_ON(!try_module_get(mux->dev->driver->owner)); get_device(mux->dev); + } mutex_unlock(&mux_lock); return mux; @@ -152,8 +159,10 @@ EXPORT_SYMBOL_GPL(typec_mux_get); */ void typec_mux_put(struct typec_mux *mux) { - if (!IS_ERR_OR_NULL(mux)) + if (!IS_ERR_OR_NULL(mux)) { + module_put(mux->dev->driver->owner); put_device(mux->dev); + } } EXPORT_SYMBOL_GPL(typec_mux_put); -- 2.18.0

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] watchdog: Mark watchdog touch functions as notrace" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From cb9d7fd51d9fbb329d182423bd7b92d0f8cb0e01 Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch <vincent.whitchurch(a)axis.com> Date: Tue, 21 Aug 2018 17:25:07 +0200 Subject: [PATCH] watchdog: Mark watchdog touch functions as notrace Some architectures need to use stop_machine() to patch functions for ftrace, and the assumption is that the stopped CPUs do not make function calls to traceable functions when they are in the stopped state. Commit ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") added calls to the watchdog touch functions from the stopped CPUs and those functions lack notrace annotations. This leads to crashes when enabling/disabling ftrace on ARM kernels built with the Thumb-2 instruction set. Fix it by adding the necessary notrace annotations. Fixes: ce4f06dcbb5d ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE") Signed-off-by: Vincent Whitchurch <vincent.whitchurch(a)axis.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: oleg(a)redhat.com Cc: tj(a)kernel.org Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/20180821152507.18313-1-vincent.whitchurch@axis.com diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 5470dce212c0..977918d5d350 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -261,7 +261,7 @@ static void __touch_watchdog(void) * entering idle state. This should only be used for scheduler events. * Use touch_softlockup_watchdog() for everything else. */ -void touch_softlockup_watchdog_sched(void) +notrace void touch_softlockup_watchdog_sched(void) { /* * Preemption can be enabled. It doesn't matter which CPU's timestamp @@ -270,7 +270,7 @@ void touch_softlockup_watchdog_sched(void) raw_cpu_write(watchdog_touch_ts, 0); } -void touch_softlockup_watchdog(void) +notrace void touch_softlockup_watchdog(void) { touch_softlockup_watchdog_sched(); wq_watchdog_touch(raw_smp_processor_id()); diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index 1f7020d65d0a..71381168dede 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -29,7 +29,7 @@ static struct cpumask dead_events_mask; static unsigned long hardlockup_allcpu_dumped; static atomic_t watchdog_cpus = ATOMIC_INIT(0); -void arch_touch_nmi_watchdog(void) +notrace void arch_touch_nmi_watchdog(void) { /* * Using __raw here because some code paths have diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 60e80198c3df..0280deac392e 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -5574,7 +5574,7 @@ static void wq_watchdog_timer_fn(struct timer_list *unused) mod_timer(&wq_watchdog_timer, jiffies + thresh); } -void wq_watchdog_touch(int cpu) +notrace void wq_watchdog_touch(int cpu) { if (cpu >= 0) per_cpu(wq_watchdog_touched_cpu, cpu) = jiffies;

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] power: generic-adc-battery: fix out-of-bounds write when" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 932d47448c3caa0fa99e84d7f5bc302aa286efd8 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" <hns(a)goldelico.com> Date: Tue, 26 Jun 2018 15:28:29 +0200 Subject: [PATCH] power: generic-adc-battery: fix out-of-bounds write when copying channel properties We did have sporadic problems in the pinctrl framework during boot where a pin group name unexpectedly became NULL leading to a NULL dereference in strcmp. Detailled analysis of the failing cases did reveal that there were two devm allocated objects close to each other. The second one was the affected group_desc in pinmux and the first one was the psy_desc->properties buffer of the gab driver. Review of the gab code showed that the address calculation for one memcpy() is wrong. It does properties + sizeof(type) * index but C is defined to do the index multiplication already for pointer + integer additions. Hence the factor was applied twice and the memcpy() does write outside of the properties buffer. Sometimes it happened to be the pinctrl and triggered the strcmp(NULL). Anyways, it is overkill to use a memcpy() here instead of a simple assignment, which is easier to read and has less risk for wrong address calculations. So we change code to a simple assignment. If we initialize the index to the first free location, we can even remove the local variable 'properties'. This bug seems to exist right from the beginning in 3.7-rc1 in commit e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: H. Nikolaus Schaller <hns(a)goldelico.com> Cc: stable(a)vger.kernel.org Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c index 28dc056eaafa..11f59275bff4 100644 --- a/drivers/power/supply/generic-adc-battery.c +++ b/drivers/power/supply/generic-adc-battery.c @@ -241,10 +241,9 @@ static int gab_probe(struct platform_device *pdev) struct power_supply_desc *psy_desc; struct power_supply_config psy_cfg = {}; struct gab_platform_data *pdata = pdev->dev.platform_data; - enum power_supply_property *properties; int ret = 0; int chan; - int index = 0; + int index = ARRAY_SIZE(gab_props); adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL); if (!adc_bat) { @@ -278,8 +277,6 @@ static int gab_probe(struct platform_device *pdev) } memcpy(psy_desc->properties, gab_props, sizeof(gab_props)); - properties = (enum power_supply_property *) - ((char *)psy_desc->properties + sizeof(gab_props)); /* * getting channel from iio and copying the battery properties @@ -293,15 +290,12 @@ static int gab_probe(struct platform_device *pdev) adc_bat->channel[chan] = NULL; } else { /* copying properties for supported channels only */ - memcpy(properties + sizeof(*(psy_desc->properties)) * index, - &gab_dyn_props[chan], - sizeof(gab_dyn_props[chan])); - index++; + psy_desc->properties[index++] = gab_dyn_props[chan]; } } /* none of the channels are supported so let's bail out */ - if (index == 0) { + if (index == ARRAY_SIZE(gab_props)) { ret = -ENODEV; goto second_mem_fail; } @@ -312,7 +306,7 @@ static int gab_probe(struct platform_device *pdev) * as come channels may be not be supported by the device.So * we need to take care of that. */ - psy_desc->num_properties = ARRAY_SIZE(gab_props) + index; + psy_desc->num_properties = index; adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg); if (IS_ERR(adc_bat->psy)) {

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] power: generic-adc-battery: check for duplicate properties" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From a427503edaaed9b75ed9746a654cece7e93e60a8 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" <hns(a)goldelico.com> Date: Tue, 26 Jun 2018 15:28:30 +0200 Subject: [PATCH] power: generic-adc-battery: check for duplicate properties copied from iio channels If an iio channel defines a basic property, there are duplicate entries in /sys/class/power/*/uevent. So add a check to avoid duplicates. Since all channels may be duplicates, we have to modify the related error check. Signed-off-by: H. Nikolaus Schaller <hns(a)goldelico.com> Cc: stable(a)vger.kernel.org Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.co.uk> diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c index 11f59275bff4..bc462d1ec963 100644 --- a/drivers/power/supply/generic-adc-battery.c +++ b/drivers/power/supply/generic-adc-battery.c @@ -244,6 +244,7 @@ static int gab_probe(struct platform_device *pdev) int ret = 0; int chan; int index = ARRAY_SIZE(gab_props); + bool any = false; adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL); if (!adc_bat) { @@ -290,12 +291,22 @@ static int gab_probe(struct platform_device *pdev) adc_bat->channel[chan] = NULL; } else { /* copying properties for supported channels only */ - psy_desc->properties[index++] = gab_dyn_props[chan]; + int index2; + + for (index2 = 0; index2 < index; index2++) { + if (psy_desc->properties[index2] == + gab_dyn_props[chan]) + break; /* already known */ + } + if (index2 == index) /* really new */ + psy_desc->properties[index++] = + gab_dyn_props[chan]; + any = true; } } /* none of the channels are supported so let's bail out */ - if (index == ARRAY_SIZE(gab_props)) { + if (!any) { ret = -ENODEV; goto second_mem_fail; }

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] mei: bus: type promotion bug in mei_nfc_if_version()" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b40b3e9358fbafff6a4ba0f4b9658f6617146f9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Wed, 11 Jul 2018 15:29:31 +0300 Subject: [PATCH] mei: bus: type promotion bug in mei_nfc_if_version() We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable(a)vger.kernel.org> Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e45fe826d87d..65e28be3c8cc 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -341,7 +341,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0, 0); - if (bytes_recv < if_version_length) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err;

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] mei: bus: type promotion bug in mei_nfc_if_version()" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b40b3e9358fbafff6a4ba0f4b9658f6617146f9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Wed, 11 Jul 2018 15:29:31 +0300 Subject: [PATCH] mei: bus: type promotion bug in mei_nfc_if_version() We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable(a)vger.kernel.org> Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e45fe826d87d..65e28be3c8cc 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -341,7 +341,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0, 0); - if (bytes_recv < if_version_length) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err;

6 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] mei: bus: type promotion bug in mei_nfc_if_version()" failed to apply to 4.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b40b3e9358fbafff6a4ba0f4b9658f6617146f9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Wed, 11 Jul 2018 15:29:31 +0300 Subject: [PATCH] mei: bus: type promotion bug in mei_nfc_if_version() We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: <stable(a)vger.kernel.org> Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e45fe826d87d..65e28be3c8cc 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -341,7 +341,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0, 0); - if (bytes_recv < if_version_length) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err;

6 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2018