January 2020 - Linux-stable-mirror

[PATCH] usb: chipidea: host: Disable port power only if previously enabled

by Guenter Roeck

On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2fb8dec ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik(a)pengutronix.de> Cc: Peter Chen <peter.chen(a)freescale.com> Cc: stable(a)vger.kernel.org Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- drivers/usb/chipidea/host.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index b45ceb91c735..48e4a5ca1835 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -26,6 +26,7 @@ static int (*orig_bus_suspend)(struct usb_hcd *hcd); struct ehci_ci_priv { struct regulator *reg_vbus; + bool enabled; }; static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) @@ -37,7 +38,7 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) int ret = 0; int port = HCS_N_PORTS(ehci->hcs_params); - if (priv->reg_vbus) { + if (priv->reg_vbus && enable != priv->enabled) { if (port > 1) { dev_warn(dev, "Not support multi-port regulator control\n"); @@ -53,6 +54,7 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) enable ? "enable" : "disable", ret); return ret; } + priv->enabled = enable; } if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { -- 2.17.1

5 years, 2 months

3
11
0 0

FAILED: patch "[PATCH] mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f667216c5c7c967c3e568cdddefb51fe606bfe26 Mon Sep 17 00:00:00 2001 From: Yangbo Lu <yangbo.lu(a)nxp.com> Date: Thu, 19 Dec 2019 11:23:35 +0800 Subject: [PATCH] mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround The erratum A-009204 workaround patch was reverted because of incorrect implementation. 8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" This patch is to re-implement the workaround (add a 5 ms delay before setting SYSCTL[RSTD] to make sure all the DMA transfers are finished). Signed-off-by: Yangbo Lu <yangbo.lu(a)nxp.com> Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com Fixes: 5dd195522562 ("mmc: sdhci-of-esdhc: add erratum A-009204 support") Cc: stable(a)vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 4ca640e6fd55..500f70a6ee42 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -80,6 +80,7 @@ struct sdhci_esdhc { bool quirk_tuning_erratum_type1; bool quirk_tuning_erratum_type2; bool quirk_ignore_data_inhibit; + bool quirk_delay_before_data_reset; bool in_sw_tuning; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; @@ -759,6 +760,11 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); u32 val; + if (esdhc->quirk_delay_before_data_reset && + (mask & SDHCI_RESET_DATA) && + (host->flags & SDHCI_REQ_USE_DMA)) + mdelay(5); + sdhci_reset(host, mask); sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); @@ -1218,6 +1224,10 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) if (match) esdhc->clk_fixup = match->data; np = pdev->dev.of_node; + + if (of_device_is_compatible(np, "fsl,p2020-esdhc")) + esdhc->quirk_delay_before_data_reset = true; + clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { /*

5 years, 2 months

2
1
0 0

FAILED: patch "[PATCH] mmc: sdhci: Update the tuning failed messages to pr_debug" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2c92dd20304f505b6ef43d206fff21bda8f1f0ae Mon Sep 17 00:00:00 2001 From: Faiz Abbas <faiz_abbas(a)ti.com> Date: Fri, 6 Dec 2019 17:13:26 +0530 Subject: [PATCH] mmc: sdhci: Update the tuning failed messages to pr_debug level Tuning support in DDR50 speed mode was added in SD Specifications Part1 Physical Layer Specification v3.01. Its not possible to distinguish between v3.00 and v3.01 from the SCR and that is why since commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode") tuning failures are ignored in DDR50 speed mode. Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this error gets printed during enumeration and also if retune is triggered at any time during operation. Update the printk level to pr_debug so that these errors don't lead to false error reports. Signed-off-by: Faiz Abbas <faiz_abbas(a)ti.com> Cc: stable(a)vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 296d955ede59..42a9c8179da7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2417,8 +2417,8 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) sdhci_send_tuning(host, opcode); if (!host->tuning_done) { - pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", - mmc_hostname(host->mmc)); + pr_debug("%s: Tuning timeout, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); sdhci_abort_tuning(host, opcode); return -ETIMEDOUT; }

5 years, 2 months

2
1
0 0

FAILED: patch "[PATCH] kvm: x86: Host feature SSBD doesn't imply guest feature" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 396d2e878f92ec108e4293f1c77ea3bc90b414ff Mon Sep 17 00:00:00 2001 From: Jim Mattson <jmattson(a)google.com> Date: Fri, 13 Dec 2019 16:15:15 -0800 Subject: [PATCH] kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson(a)google.com> Reviewed-by: Jacob Xu <jacobhxu(a)google.com> Reviewed-by: Peter Shier <pshier(a)google.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: stable(a)vger.kernel.org Reported-by: Eric Biggers <ebiggers(a)kernel.org> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index c0aa07487eb8..dd18aa6fa317 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -402,7 +402,8 @@ static inline void do_cpuid_7_mask(struct kvm_cpuid_entry2 *entry, int index) entry->edx |= F(SPEC_CTRL); if (boot_cpu_has(X86_FEATURE_STIBP)) entry->edx |= F(INTEL_STIBP); - if (boot_cpu_has(X86_FEATURE_SSBD)) + if (boot_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) || + boot_cpu_has(X86_FEATURE_AMD_SSBD)) entry->edx |= F(SPEC_CTRL_SSBD); /* * We emulate ARCH_CAPABILITIES in software even

5 years, 2 months

2
1
0 0

FAILED: patch "[PATCH] serial: sprd: Add clearing break interrupt operation" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From abeb2e9414d7e3a0d8417bc3b13d7172513ea8a0 Mon Sep 17 00:00:00 2001 From: Yonghan Ye <yonghan.ye(a)unisoc.com> Date: Wed, 4 Dec 2019 20:00:07 +0800 Subject: [PATCH] serial: sprd: Add clearing break interrupt operation A break interrupt will be generated if the RX line was pulled low, which means some abnomal behaviors occurred of the UART. In this case, we still need to clear this break interrupt status, otherwise it will cause irq storm to crash the whole system. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Yonghan Ye <yonghan.ye(a)unisoc.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Baolin Wang <baolin.wang7(a)gmail.com> Link: https://lore.kernel.org/r/925e51b73099c90158e080b8f5bed9b3b38c4548.15754606… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 31df23502562..f60a59d9bf27 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -679,6 +679,9 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) if (ims & SPRD_IMSR_TIMEOUT) serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); + if (ims & SPRD_IMSR_BREAK_DETECT) + serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT); + if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT)) sprd_rx(port);

5 years, 2 months

2
1
0 0

stable-rc/linux-4.19.y boot: 67 boots: 1 failed, 65 passed with 1 untried/unknown (v4.19.92-90-g04f3d64d2985)

by kernelci.org bot

stable-rc/linux-4.19.y boot: 67 boots: 1 failed, 65 passed with 1 untried/unknown (v4.19.92-90-g04f3d64d2985) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.1… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.92-90… Tree: stable-rc Branch: linux-4.19.y Git Describe: v4.19.92-90-g04f3d64d2985 Git Commit: 04f3d64d298561ffd9f54738444781384adf53f8 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 43 unique boards, 15 SoC families, 14 builds out of 206 Boot Failure Detected: arm64: defconfig: gcc-8: meson-gxl-s905d-p230: 1 failed lab --- For more info write to <info(a)kernelci.org>

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] spi: fsl: don't map irq during probe" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 3194d2533efffae8b815d84729ecc58b6a9000ab Mon Sep 17 00:00:00 2001 From: Christophe Leroy <christophe.leroy(a)c-s.fr> Date: Mon, 9 Dec 2019 15:27:27 +0000 Subject: [PATCH] spi: fsl: don't map irq during probe With lastest kernel, the following warning is observed at startup: [ 1.500609] ------------[ cut here ]------------ [ 1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi' [ 1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0 [ 1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564 [ 1.530724] NIP: c0197694 LR: c0197694 CTR: c0050d80 [ 1.535762] REGS: df4a5af0 TRAP: 0700 Not tainted (5.4.0-02248-g93532430a4ff) [ 1.543818] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22028222 XER: 00000000 [ 1.550524] [ 1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010 [ 1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000 [ 1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078 [ 1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3 [ 1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.595829] Call Trace: [ 1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable) [ 1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70 [ 1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80 [ 1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8 [ 1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc [ 1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4 [ 1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418 [ 1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0 [ 1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128 [ 1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc [ 1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c [ 1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100 [ 1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c [ 1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c [ 1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0 [ 1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4 [ 1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4 [ 1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204 [ 1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110 [ 1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c [ 1.719926] Instruction dump: [ 1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78 [ 1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78 [ 1.738556] ---[ end trace 05d0720bf2e352e2 ]--- The problem comes from the error path which calls irq_dispose_mapping() while the IRQ has been requested with devm_request_irq(). IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only need is to get the IRQ virtual number. For that, use of_irq_to_resource() instead of the irq_of_parse_and_map()/irq_dispose_mapping() pair. Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path") Cc: stable(a)vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.15759051… Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 4b70887cf443..d0ad9709f4a6 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -746,8 +746,8 @@ static int of_fsl_spi_probe(struct platform_device *ofdev) if (ret) goto err; - irq = irq_of_parse_and_map(np, 0); - if (!irq) { + irq = of_irq_to_resource(np, 0, NULL); + if (irq <= 0) { ret = -EINVAL; goto err; } @@ -761,7 +761,6 @@ static int of_fsl_spi_probe(struct platform_device *ofdev) return 0; err: - irq_dispose_mapping(irq); return ret; }

5 years, 2 months

2
1
0 0

stable-rc/linux-4.9.y boot: 43 boots: 0 failed, 42 passed with 1 untried/unknown (v4.9.207-163-g05e2f5c48547)

by kernelci.org bot

stable-rc/linux-4.9.y boot: 43 boots: 0 failed, 42 passed with 1 untried/unknown (v4.9.207-163-g05e2f5c48547) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.207-163… Tree: stable-rc Branch: linux-4.9.y Git Describe: v4.9.207-163-g05e2f5c48547 Git Commit: 05e2f5c48547dbea78a0f9fcd8e57eb8aa513c6a Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 25 unique boards, 12 SoC families, 12 builds out of 197 --- For more info write to <info(a)kernelci.org>

5 years, 2 months

1
0
0 0

stable-rc/linux-4.14.y boot: 56 boots: 1 failed, 54 passed with 1 untried/unknown (v4.14.161-71-g304199b2cbbb)

by kernelci.org bot

stable-rc/linux-4.14.y boot: 56 boots: 1 failed, 54 passed with 1 untried/unknown (v4.14.161-71-g304199b2cbbb) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.1… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.161-7… Tree: stable-rc Branch: linux-4.14.y Git Describe: v4.14.161-71-g304199b2cbbb Git Commit: 304199b2cbbb59e5c61a32a19e753299a2692968 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 35 unique boards, 13 SoC families, 12 builds out of 201 Boot Failure Detected: arm64: defconfig: gcc-8: meson-gxm-q200: 1 failed lab --- For more info write to <info(a)kernelci.org>

5 years, 2 months

1
0
0 0

stable-rc/linux-4.4.y boot: 36 boots: 0 failed, 36 passed (v4.4.207-136-g375f24644bef)

by kernelci.org bot

stable-rc/linux-4.4.y boot: 36 boots: 0 failed, 36 passed (v4.4.207-136-g375f24644bef) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.207-136… Tree: stable-rc Branch: linux-4.4.y Git Describe: v4.4.207-136-g375f24644bef Git Commit: 375f24644bef51fa102699a3f74d67b7b93ea0c5 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 20 unique boards, 9 SoC families, 9 builds out of 190 --- For more info write to <info(a)kernelci.org>

5 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2020