October 2020 - Linux-stable-mirror

FAILED: patch "[PATCH] pinctrl: baytrail: Fix pin being driven low for a while on" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 156abe2961601d60a8c2a60c6dc8dd6ce7adcdaf Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Sat, 6 Jun 2020 11:31:50 +0200 Subject: [PATCH] pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH) The pins on the Bay Trail SoC have separate input-buffer and output-buffer enable bits and a read of the level bit of the value register will always return the value from the input-buffer. The BIOS of a device may configure a pin in output-only mode, only enabling the output buffer, and write 1 to the level bit to drive the pin high. This 1 written to the level bit will be stored inside the data-latch of the output buffer. But a subsequent read of the value register will return 0 for the level bit because the input-buffer is disabled. This causes a read-modify-write as done by byt_gpio_set_direction() to write 0 to the level bit, driving the pin low! Before this commit byt_gpio_direction_output() relied on pinctrl_gpio_direction_output() to set the direction, followed by a call to byt_gpio_set() to apply the selected value. This causes the pin to go low between the pinctrl_gpio_direction_output() and byt_gpio_set() calls. Change byt_gpio_direction_output() to directly make the register modifications itself instead. Replacing the 2 subsequent writes to the value register with a single write. Note that the pinctrl code does not keep track internally of the direction, so not going through pinctrl_gpio_direction_output() is not an issue. This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is already on at boot (no external monitor connected), then the i915 driver does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The temporarily going low of that GPIO was causing the panel to reset itself after which it would not show an image until it was turned off and back on again (until a full modeset was done on it). This commit fixes this. This commit also updates the byt_gpio_direction_input() to use direct register accesses instead of going through pinctrl_gpio_direction_input(), to keep it consistent with byt_gpio_direction_output(). Note for backporting, this commit depends on: commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output") Cc: stable(a)vger.kernel.org Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations") Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Acked-by: Mika Westerberg <mika.westerberg(a)linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index e3ceb3dfeabe..a917a2df520e 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -800,6 +800,21 @@ static void byt_gpio_disable_free(struct pinctrl_dev *pctl_dev, pm_runtime_put(vg->dev); } +static void byt_gpio_direct_irq_check(struct intel_pinctrl *vg, + unsigned int offset) +{ + void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); + + /* + * Before making any direction modifications, do a check if gpio is set + * for direct IRQ. On Bay Trail, setting GPIO to output does not make + * sense, so let's at least inform the caller before they shoot + * themselves in the foot. + */ + if (readl(conf_reg) & BYT_DIRECT_IRQ_EN) + dev_info_once(vg->dev, "Potential Error: Setting GPIO with direct_irq_en to output"); +} + static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev, struct pinctrl_gpio_range *range, unsigned int offset, @@ -807,7 +822,6 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev, { struct intel_pinctrl *vg = pinctrl_dev_get_drvdata(pctl_dev); void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); - void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); unsigned long flags; u32 value; @@ -817,14 +831,8 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev, value &= ~BYT_DIR_MASK; if (input) value |= BYT_OUTPUT_EN; - else if (readl(conf_reg) & BYT_DIRECT_IRQ_EN) - /* - * Before making any direction modifications, do a check if gpio - * is set for direct IRQ. On baytrail, setting GPIO to output - * does not make sense, so let's at least inform the caller before - * they shoot themselves in the foot. - */ - dev_info_once(vg->dev, "Potential Error: Setting GPIO with direct_irq_en to output"); + else + byt_gpio_direct_irq_check(vg, offset); writel(value, val_reg); @@ -1165,19 +1173,50 @@ static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { - return pinctrl_gpio_direction_input(chip->base + offset); + struct intel_pinctrl *vg = gpiochip_get_data(chip); + void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); + unsigned long flags; + u32 reg; + + raw_spin_lock_irqsave(&byt_lock, flags); + + reg = readl(val_reg); + reg &= ~BYT_DIR_MASK; + reg |= BYT_OUTPUT_EN; + writel(reg, val_reg); + + raw_spin_unlock_irqrestore(&byt_lock, flags); + return 0; } +/* + * Note despite the temptation this MUST NOT be converted into a call to + * pinctrl_gpio_direction_output() + byt_gpio_set() that does not work this + * MUST be done as a single BYT_VAL_REG register write. + * See the commit message of the commit adding this comment for details. + */ static int byt_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) { - int ret = pinctrl_gpio_direction_output(chip->base + offset); + struct intel_pinctrl *vg = gpiochip_get_data(chip); + void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); + unsigned long flags; + u32 reg; - if (ret) - return ret; + raw_spin_lock_irqsave(&byt_lock, flags); + + byt_gpio_direct_irq_check(vg, offset); - byt_gpio_set(chip, offset, value); + reg = readl(val_reg); + reg &= ~BYT_DIR_MASK; + if (value) + reg |= BYT_LEVEL; + else + reg &= ~BYT_LEVEL; + writel(reg, val_reg); + + raw_spin_unlock_irqrestore(&byt_lock, flags); return 0; }

3 years, 4 months

3
2
0 0

FAILED: patch "[PATCH] sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 39f23ce07b9355d05a64ae303ce20d1c4b92b957 Mon Sep 17 00:00:00 2001 From: Vincent Guittot <vincent.guittot(a)linaro.org> Date: Wed, 13 May 2020 15:55:28 +0200 Subject: [PATCH] sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list Although not exactly identical, unthrottle_cfs_rq() and enqueue_task_fair() are quite close and follow the same sequence for enqueuing an entity in the cfs hierarchy. Modify unthrottle_cfs_rq() to use the same pattern as enqueue_task_fair(). This fixes a problem already faced with the latter and add an optimization in the last for_each_sched_entity loop. Fixes: fe61468b2cb (sched/fair: Fix enqueue_task_fair warning) Reported-by Tao Zhou <zohooouoto(a)zoho.com.cn> Signed-off-by: Vincent Guittot <vincent.guittot(a)linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Reviewed-by: Phil Auld <pauld(a)redhat.com> Reviewed-by: Ben Segall <bsegall(a)google.com> Link: https://lkml.kernel.org/r/20200513135528.4742-1-vincent.guittot@linaro.org diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index c6d57c334d51..538ba5d94e99 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4774,7 +4774,6 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq) struct rq *rq = rq_of(cfs_rq); struct cfs_bandwidth *cfs_b = tg_cfs_bandwidth(cfs_rq->tg); struct sched_entity *se; - int enqueue = 1; long task_delta, idle_task_delta; se = cfs_rq->tg->se[cpu_of(rq)]; @@ -4798,26 +4797,44 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq) idle_task_delta = cfs_rq->idle_h_nr_running; for_each_sched_entity(se) { if (se->on_rq) - enqueue = 0; + break; + cfs_rq = cfs_rq_of(se); + enqueue_entity(cfs_rq, se, ENQUEUE_WAKEUP); + cfs_rq->h_nr_running += task_delta; + cfs_rq->idle_h_nr_running += idle_task_delta; + + /* end evaluation on encountering a throttled cfs_rq */ + if (cfs_rq_throttled(cfs_rq)) + goto unthrottle_throttle; + } + + for_each_sched_entity(se) { cfs_rq = cfs_rq_of(se); - if (enqueue) { - enqueue_entity(cfs_rq, se, ENQUEUE_WAKEUP); - } else { - update_load_avg(cfs_rq, se, 0); - se_update_runnable(se); - } + + update_load_avg(cfs_rq, se, UPDATE_TG); + se_update_runnable(se); cfs_rq->h_nr_running += task_delta; cfs_rq->idle_h_nr_running += idle_task_delta; + + /* end evaluation on encountering a throttled cfs_rq */ if (cfs_rq_throttled(cfs_rq)) - break; + goto unthrottle_throttle; + + /* + * One parent has been throttled and cfs_rq removed from the + * list. Add it back to not break the leaf list. + */ + if (throttled_hierarchy(cfs_rq)) + list_add_leaf_cfs_rq(cfs_rq); } - if (!se) - add_nr_running(rq, task_delta); + /* At this point se is NULL and we are at root level*/ + add_nr_running(rq, task_delta); +unthrottle_throttle: /* * The cfs_rq_throttled() breaks in the above iteration can result in * incomplete leaf list maintenance, resulting in triggering the @@ -4826,7 +4843,8 @@ void unthrottle_cfs_rq(struct cfs_rq *cfs_rq) for_each_sched_entity(se) { cfs_rq = cfs_rq_of(se); - list_add_leaf_cfs_rq(cfs_rq); + if (list_add_leaf_cfs_rq(cfs_rq)) + break; } assert_list_leaf_cfs_rq(rq);

3 years, 4 months

4
9
0 0

[PATCH v6 1/3] i2c: imx: Fix reset of I2SR_IAL flag

by Christian Eggers

According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers(a)arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Acked-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Cc: stable(a)vger.kernel.org --- drivers/i2c/busses/i2c-imx.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0ab5381aa012..028f8a626410 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -412,6 +412,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } +static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits) +{ + unsigned int temp; + + /* + * i2sr_clr_opcode is the value to clear all interrupts. Here we want to + * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits> + * toggled. This is required because i.MX needs W0C and Vybrid uses W1C. + */ + temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); +} + static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic) { unsigned long orig_jiffies = jiffies; @@ -424,8 +437,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a /* check for arbitration lost */ if (temp & I2SR_IAL) { - temp &= ~I2SR_IAL; - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); return -EAGAIN; } @@ -469,7 +481,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic) */ readb_poll_timeout_atomic(addr, regval, regval & I2SR_IIF, 5, 1000 + 100); i2c_imx->i2csr = regval; - imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF | I2SR_IAL); } else { wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); } @@ -623,9 +635,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; - temp &= ~I2SR_IIF; - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF); wake_up(&i2c_imx->queue); return IRQ_HANDLED; } -- Christian Eggers Embedded software developer Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler

3 years, 5 months

2
3
0 0

[PATCH] arm64: don't preempt_disable in do_debug_exception

by Paul Gortmaker

In commit d8bb6718c4db ("arm64: Make debug exception handlers visible from RCU") debug_exception_enter and exit were added to deal with better tracking of RCU state - however, in addition to that, but not mentioned in the commit log, a preempt_disable/enable pair were also added. Based on the comment (being removed here) it would seem that the pair were not added to address a specific problem, but just as a proactive, preventative measure - as in "seemed like a good idea at the time". The problem is that do_debug_exception() eventually calls out to generic kernel code like do_force_sig_info() which takes non-raw locks and on -rt enabled kernels, results in things looking like the following, since on -rt kernels, it is noticed that preemption is still disabled. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:975 in_atomic(): 1, irqs_disabled(): 0, pid: 35658, name: gdbtest Preemption disabled at: [<ffff000010081578>] do_debug_exception+0x38/0x1a4 Call trace: dump_backtrace+0x0/0x138 show_stack+0x24/0x30 dump_stack+0x94/0xbc ___might_sleep+0x13c/0x168 rt_spin_lock+0x40/0x80 do_force_sig_info+0x30/0xe0 force_sig_fault+0x64/0x90 arm64_force_sig_fault+0x50/0x80 send_user_sigtrap+0x50/0x80 brk_handler+0x98/0xc8 do_debug_exception+0x70/0x1a4 el0_dbg+0x18/0x20 The reproducer was basically an automated gdb test that set a breakpoint on a simple "hello world" program and then quit gdb once the breakpoint was hit - i.e. "(gdb) A debugging session is active. Quit anyway? " Fixes: d8bb6718c4db ("arm64: Make debug exception handlers visible from RCU") Cc: stable(a)vger.kernel.org Cc: Naresh Kamboju <naresh.kamboju(a)linaro.org> Cc: Paul E. McKenney <paulmck(a)linux.ibm.com> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Will Deacon <will(a)kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker(a)windriver.com> --- arch/arm64/mm/fault.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 8afb238ff335..4d83ec991b33 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -788,13 +788,6 @@ void __init hook_debug_fault_code(int nr, debug_fault_info[nr].name = name; } -/* - * In debug exception context, we explicitly disable preemption despite - * having interrupts disabled. - * This serves two purposes: it makes it much less likely that we would - * accidentally schedule in exception context and it will force a warning - * if we somehow manage to schedule by accident. - */ static void debug_exception_enter(struct pt_regs *regs) { /* @@ -816,8 +809,6 @@ static void debug_exception_enter(struct pt_regs *regs) rcu_nmi_enter(); } - preempt_disable(); - /* This code is a bit fragile. Test it. */ RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work"); } @@ -825,8 +816,6 @@ NOKPROBE_SYMBOL(debug_exception_enter); static void debug_exception_exit(struct pt_regs *regs) { - preempt_enable_no_resched(); - if (!user_mode(regs)) rcu_nmi_exit(); -- 2.7.4

3 years, 5 months

4
6
0 0

FAILED: patch "[PATCH] ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ce1558c285f9ad04c03b46833a028230771cc0a7 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Date: Tue, 13 Oct 2020 18:26:28 +0300 Subject: [PATCH] ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close A race exists between closing a PCM and update of ELD data. In hdmi_pcm_close(), hinfo->nid value is modified without taking spec->pcm_lock. If this happens concurrently while processing an ELD update in hdmi_pcm_setup_pin(), converter assignment may be done incorrectly. This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign() in a HDMI receiver connection stress test: [2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi] ... [2739.684707] Call Trace: [2739.684720] update_eld+0x121/0x5a0 [snd_hda_codec_hdmi] [2739.684736] hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi] [2739.684750] check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi] [2739.684842] intel_audio_codec_enable+0x122/0x190 [i915] Fixes: 42b2987079ec ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode") Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20201013152628.920764-1-kai.vehmanen@linux.intel.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 0ffbfcb91256..ccd1df059654 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2046,22 +2046,25 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, int pinctl; int err = 0; + mutex_lock(&spec->pcm_lock); if (hinfo->nid) { pcm_idx = hinfo_to_pcm_index(codec, hinfo); - if (snd_BUG_ON(pcm_idx < 0)) - return -EINVAL; + if (snd_BUG_ON(pcm_idx < 0)) { + err = -EINVAL; + goto unlock; + } cvt_idx = cvt_nid_to_cvt_index(codec, hinfo->nid); - if (snd_BUG_ON(cvt_idx < 0)) - return -EINVAL; + if (snd_BUG_ON(cvt_idx < 0)) { + err = -EINVAL; + goto unlock; + } per_cvt = get_cvt(spec, cvt_idx); - snd_BUG_ON(!per_cvt->assigned); per_cvt->assigned = 0; hinfo->nid = 0; azx_stream(get_azx_dev(substream))->stripe = 0; - mutex_lock(&spec->pcm_lock); snd_hda_spdif_ctls_unassign(codec, pcm_idx); clear_bit(pcm_idx, &spec->pcm_in_use); pin_idx = hinfo_to_pin_index(codec, hinfo); @@ -2091,10 +2094,11 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, per_pin->setup = false; per_pin->channels = 0; mutex_unlock(&per_pin->lock); - unlock: - mutex_unlock(&spec->pcm_lock); } +unlock: + mutex_unlock(&spec->pcm_lock); + return err; }

3 years, 5 months

3
2
0 0

FAILED: patch "[PATCH] i2c: imx: Fix reset of I2SR_IAL flag" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From fa4d30556883f2eaab425b88ba9904865a4d00f3 Mon Sep 17 00:00:00 2001 From: Christian Eggers <ceggers(a)arri.de> Date: Wed, 7 Oct 2020 10:45:22 +0200 Subject: [PATCH] i2c: imx: Fix reset of I2SR_IAL flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers(a)arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Cc: stable(a)vger.kernel.org Signed-off-by: Wolfram Sang <wsa(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0ab5381aa012..cbdcab73a055 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -412,6 +412,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } +static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits) +{ + unsigned int temp; + + /* + * i2sr_clr_opcode is the value to clear all interrupts. Here we want to + * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits> + * toggled. This is required because i.MX needs W1C and Vybrid uses W0C. + */ + temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); +} + static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic) { unsigned long orig_jiffies = jiffies; @@ -424,8 +437,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a /* check for arbitration lost */ if (temp & I2SR_IAL) { - temp &= ~I2SR_IAL; - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); return -EAGAIN; } @@ -623,9 +635,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; - temp &= ~I2SR_IIF; - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF); wake_up(&i2c_imx->queue); return IRQ_HANDLED; }

3 years, 5 months

3
2
0 0

FAILED: patch "[PATCH] i2c: imx: Fix reset of I2SR_IAL flag" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From fa4d30556883f2eaab425b88ba9904865a4d00f3 Mon Sep 17 00:00:00 2001 From: Christian Eggers <ceggers(a)arri.de> Date: Wed, 7 Oct 2020 10:45:22 +0200 Subject: [PATCH] i2c: imx: Fix reset of I2SR_IAL flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers(a)arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Cc: stable(a)vger.kernel.org Signed-off-by: Wolfram Sang <wsa(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0ab5381aa012..cbdcab73a055 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -412,6 +412,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } +static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits) +{ + unsigned int temp; + + /* + * i2sr_clr_opcode is the value to clear all interrupts. Here we want to + * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits> + * toggled. This is required because i.MX needs W1C and Vybrid uses W0C. + */ + temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); +} + static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic) { unsigned long orig_jiffies = jiffies; @@ -424,8 +437,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a /* check for arbitration lost */ if (temp & I2SR_IAL) { - temp &= ~I2SR_IAL; - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); return -EAGAIN; } @@ -623,9 +635,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; - temp &= ~I2SR_IIF; - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF); wake_up(&i2c_imx->queue); return IRQ_HANDLED; }

3 years, 5 months

2
1
0 0

FAILED: patch "[PATCH] ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ce1558c285f9ad04c03b46833a028230771cc0a7 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Date: Tue, 13 Oct 2020 18:26:28 +0300 Subject: [PATCH] ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close A race exists between closing a PCM and update of ELD data. In hdmi_pcm_close(), hinfo->nid value is modified without taking spec->pcm_lock. If this happens concurrently while processing an ELD update in hdmi_pcm_setup_pin(), converter assignment may be done incorrectly. This bug was found by hitting a WARN_ON in snd_hda_spdif_ctls_assign() in a HDMI receiver connection stress test: [2739.684569] WARNING: CPU: 5 PID: 2090 at sound/pci/hda/patch_hdmi.c:1898 check_non_pcm_per_cvt+0x41/0x50 [snd_hda_codec_hdmi] ... [2739.684707] Call Trace: [2739.684720] update_eld+0x121/0x5a0 [snd_hda_codec_hdmi] [2739.684736] hdmi_present_sense+0x21e/0x3b0 [snd_hda_codec_hdmi] [2739.684750] check_presence_and_report+0x81/0xd0 [snd_hda_codec_hdmi] [2739.684842] intel_audio_codec_enable+0x122/0x190 [i915] Fixes: 42b2987079ec ("ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode") Signed-off-by: Kai Vehmanen <kai.vehmanen(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20201013152628.920764-1-kai.vehmanen@linux.intel.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 0ffbfcb91256..ccd1df059654 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2046,22 +2046,25 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, int pinctl; int err = 0; + mutex_lock(&spec->pcm_lock); if (hinfo->nid) { pcm_idx = hinfo_to_pcm_index(codec, hinfo); - if (snd_BUG_ON(pcm_idx < 0)) - return -EINVAL; + if (snd_BUG_ON(pcm_idx < 0)) { + err = -EINVAL; + goto unlock; + } cvt_idx = cvt_nid_to_cvt_index(codec, hinfo->nid); - if (snd_BUG_ON(cvt_idx < 0)) - return -EINVAL; + if (snd_BUG_ON(cvt_idx < 0)) { + err = -EINVAL; + goto unlock; + } per_cvt = get_cvt(spec, cvt_idx); - snd_BUG_ON(!per_cvt->assigned); per_cvt->assigned = 0; hinfo->nid = 0; azx_stream(get_azx_dev(substream))->stripe = 0; - mutex_lock(&spec->pcm_lock); snd_hda_spdif_ctls_unassign(codec, pcm_idx); clear_bit(pcm_idx, &spec->pcm_in_use); pin_idx = hinfo_to_pin_index(codec, hinfo); @@ -2091,10 +2094,11 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo, per_pin->setup = false; per_pin->channels = 0; mutex_unlock(&per_pin->lock); - unlock: - mutex_unlock(&spec->pcm_lock); } +unlock: + mutex_unlock(&spec->pcm_lock); + return err; }

3 years, 5 months

2
1
0 0

FAILED: patch "[PATCH] PCI: Add device even if driver attach failed" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2194bc7c39610be7cabe7456c5f63a570604f015 Mon Sep 17 00:00:00 2001 From: Rajat Jain <rajatja(a)google.com> Date: Mon, 6 Jul 2020 16:32:40 -0700 Subject: [PATCH] PCI: Add device even if driver attach failed device_attach() returning failure indicates a driver error while trying to probe the device. In such a scenario, the PCI device should still be added in the system and be visible to the user. When device_attach() fails, merely warn about it and keep the PCI device in the system. This partially reverts ab1a187bba5c ("PCI: Check device_attach() return value always"). Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja(a)google.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: stable(a)vger.kernel.org # v4.6+ diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 8e40b3e6da77..3cef835b375f 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -322,12 +322,8 @@ void pci_bus_add_device(struct pci_dev *dev) dev->match_driver = true; retval = device_attach(&dev->dev); - if (retval < 0 && retval != -EPROBE_DEFER) { + if (retval < 0 && retval != -EPROBE_DEFER) pci_warn(dev, "device attach failed (%d)\n", retval); - pci_proc_detach_device(dev); - pci_remove_sysfs_dev_files(dev); - return; - } pci_dev_assign_added(dev, true); }

3 years, 5 months

3
2
0 0

[PATCH] clk: tegra: Do not return 0 on failure

by Nicolin Chen

Return values from read_dt_param() will be either TRUE (1) or FALSE (0), while dfll_fetch_pwm_params() returns 0 on success or an ERR code on failure. So this patch fixes the bug of returning 0 on failure. Fixes: 36541f0499fe ("clk: tegra: dfll: support PWM regulator control") Cc: <stable(a)vger.kernel.org> Signed-off-by: Nicolin Chen <nicoleotsuka(a)gmail.com> --- drivers/clk/tegra/clk-dfll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c index cfbaa90c7adb..a5f526bb0483 100644 --- a/drivers/clk/tegra/clk-dfll.c +++ b/drivers/clk/tegra/clk-dfll.c @@ -1856,13 +1856,13 @@ static int dfll_fetch_pwm_params(struct tegra_dfll *td) &td->reg_init_uV); if (!ret) { dev_err(td->dev, "couldn't get initialized voltage\n"); - return ret; + return -EINVAL; } ret = read_dt_param(td, "nvidia,pwm-period-nanoseconds", &pwm_period); if (!ret) { dev_err(td->dev, "couldn't get PWM period\n"); - return ret; + return -EINVAL; } td->pwm_rate = (NSEC_PER_SEC / pwm_period) * (MAX_DFLL_VOLTAGES - 1); -- 2.17.1

3 years, 5 months

3
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2020