December 2020 - Linux-stable-mirror

+ hugetlb_cgroup-fix-offline-of-hugetlb-cgroup-with-reservations.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: hugetlb_cgroup: fix offline of hugetlb cgroup with reservations has been added to the -mm tree. Its filename is hugetlb_cgroup-fix-offline-of-hugetlb-cgroup-with-reservations.patch This patch should soon appear at https://ozlabs.org/~akpm/mmots/broken-out/hugetlb_cgroup-fix-offline-of-hug… and later at https://ozlabs.org/~akpm/mmotm/broken-out/hugetlb_cgroup-fix-offline-of-hug… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Mike Kravetz <mike.kravetz(a)oracle.com> Subject: hugetlb_cgroup: fix offline of hugetlb cgroup with reservations Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload using hugetlbfs. In this environment the issue is reproduced by: 1 - Start a simple pod that uses the recently added HugePages medium feature (pod yaml attached) 2 - Start a DPDK app. It doesn't need to run successfully (as in transfer packets) nor interact with real hardware. It seems just initializing the EAL layer (which handles hugepage reservation and locking) is enough to trigger the issue 3 - Delete the Pod (or let it "Complete"). This would result in a kworker thread going into a tight loop (top output): 1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy 'perf top -g' reports: - 63.28% 0.01% [kernel] [k] worker_thread - 49.97% worker_thread - 52.64% process_one_work - 62.08% css_killed_work_fn - hugetlb_cgroup_css_offline 41.52% _raw_spin_lock - 2.82% _cond_resched rcu_all_qs 2.66% PageHuge - 0.57% schedule - 0.57% __schedule We are spinning in the do-while loop in hugetlb_cgroup_css_offline. Worse yet, we are holding the master cgroup lock (cgroup_mutex) while infinitely spinning. Little else can be done on the system as the cgroup_mutex can not be acquired. Do note that the issue can be reproduced by simply offlining a hugetlb cgroup containing pages with reservation counts. The loop in hugetlb_cgroup_css_offline is moving page counts from the cgroup being offlined to the parent cgroup. This is done for each hstate, and is repeated until hugetlb_cgroup_have_usage returns false. The routine moving counts (hugetlb_cgroup_move_parent) is only moving 'usage' counts. The routine hugetlb_cgroup_have_usage is checking for both 'usage' and 'reservation' counts. Discussion about what to do with reservation counts when reparenting was discussed here: https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN7… The decision was made to leave a zombie cgroup for with reservation counts. Unfortunately, the code checking reservation counts was incorrectly added to hugetlb_cgroup_have_usage. To fix the issue, simply remove the check for reservation counts. While fixing this issue, a related bug in hugetlb_cgroup_css_offline was noticed. The hstate index is not reinitialized each time through the do-while loop. Fix this as well. Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.com Fixes: 1adc4d419aa2 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations") Reported-by: Adrian Moreno <amorenoz(a)redhat.com> Tested-by: Adrian Moreno <amorenoz(a)redhat.com> Signed-off-by: Mike Kravetz <mike.kravetz(a)oracle.com> Reviewed-by: Shakeel Butt <shakeelb(a)google.com> Cc: Mina Almasry <almasrymina(a)google.com> Cc: David Rientjes <rientjes(a)google.com> Cc: Greg Thelen <gthelen(a)google.com> Cc: Sandipan Das <sandipan(a)linux.ibm.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/hugetlb_cgroup.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) --- a/mm/hugetlb_cgroup.c~hugetlb_cgroup-fix-offline-of-hugetlb-cgroup-with-reservations +++ a/mm/hugetlb_cgroup.c @@ -82,11 +82,8 @@ static inline bool hugetlb_cgroup_have_u for (idx = 0; idx < hugetlb_max_hstate; idx++) { if (page_counter_read( - hugetlb_cgroup_counter_from_cgroup(h_cg, idx)) || - page_counter_read(hugetlb_cgroup_counter_from_cgroup_rsvd( - h_cg, idx))) { + hugetlb_cgroup_counter_from_cgroup(h_cg, idx))) return true; - } } return false; } @@ -202,9 +199,10 @@ static void hugetlb_cgroup_css_offline(s struct hugetlb_cgroup *h_cg = hugetlb_cgroup_from_css(css); struct hstate *h; struct page *page; - int idx = 0; + int idx; do { + idx = 0; for_each_hstate(h) { spin_lock(&hugetlb_lock); list_for_each_entry(page, &h->hugepage_activelist, lru) _ Patches currently in -mm which might be from mike.kravetz(a)oracle.com are hugetlb_cgroup-fix-offline-of-hugetlb-cgroup-with-reservations.patch

3 years, 7 months

1
0
0 0

[PATCH] hugetlb_cgroup: fix offline of hugetlb cgroup with reservations

by Mike Kravetz

Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload using hugetlbfs. In this environment the issue is reproduced by: 1 - Start a simple pod that uses the recently added HugePages medium feature (pod yaml attached) 2 - Start a DPDK app. It doesn't need to run successfully (as in transfer packets) nor interact with real hardware. It seems just initializing the EAL layer (which handles hugepage reservation and locking) is enough to trigger the issue 3 - Delete the Pod (or let it "Complete"). This would result in a kworker thread going into a tight loop (top output): 1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy 'perf top -g' reports: - 63.28% 0.01% [kernel] [k] worker_thread - 49.97% worker_thread - 52.64% process_one_work - 62.08% css_killed_work_fn - hugetlb_cgroup_css_offline 41.52% _raw_spin_lock - 2.82% _cond_resched rcu_all_qs 2.66% PageHuge - 0.57% schedule - 0.57% __schedule We are spinning in the do-while loop in hugetlb_cgroup_css_offline. Worse yet, we are holding the master cgroup lock (cgroup_mutex) while infinitely spinning. Little else can be done on the system as the cgroup_mutex can not be acquired. Do note that the issue can be reproduced by simply offlining a hugetlb cgroup containing pages with reservation counts. The loop in hugetlb_cgroup_css_offline is moving page counts from the cgroup being offlined to the parent cgroup. This is done for each hstate, and is repeated until hugetlb_cgroup_have_usage returns false. The routine moving counts (hugetlb_cgroup_move_parent) is only moving 'usage' counts. The routine hugetlb_cgroup_have_usage is checking for both 'usage' and 'reservation' counts. Discussion about what to do with reservation counts when reparenting was discussed here: https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN7… The decision was made to leave a zombie cgroup for with reservation counts. Unfortunately, the code checking reservation counts was incorrectly added to hugetlb_cgroup_have_usage. To fix the issue, simply remove the check for reservation counts. While fixing this issue, a related bug in hugetlb_cgroup_css_offline was noticed. The hstate index is not reinitialized each time through the do-while loop. Fix this as well. Fixes: 1adc4d419aa2 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations") Cc: <stable(a)vger.kernel.org> Reported-by: Adrian Moreno <amorenoz(a)redhat.com> Tested-by: Adrian Moreno <amorenoz(a)redhat.com> Signed-off-by: Mike Kravetz <mike.kravetz(a)oracle.com> --- mm/hugetlb_cgroup.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/mm/hugetlb_cgroup.c b/mm/hugetlb_cgroup.c index 1f87aec9ab5c..9182848dda3e 100644 --- a/mm/hugetlb_cgroup.c +++ b/mm/hugetlb_cgroup.c @@ -82,11 +82,8 @@ static inline bool hugetlb_cgroup_have_usage(struct hugetlb_cgroup *h_cg) for (idx = 0; idx < hugetlb_max_hstate; idx++) { if (page_counter_read( - hugetlb_cgroup_counter_from_cgroup(h_cg, idx)) || - page_counter_read(hugetlb_cgroup_counter_from_cgroup_rsvd( - h_cg, idx))) { + hugetlb_cgroup_counter_from_cgroup(h_cg, idx))) return true; - } } return false; } @@ -202,9 +199,10 @@ static void hugetlb_cgroup_css_offline(struct cgroup_subsys_state *css) struct hugetlb_cgroup *h_cg = hugetlb_cgroup_from_css(css); struct hstate *h; struct page *page; - int idx = 0; + int idx; do { + idx = 0; for_each_hstate(h) { spin_lock(&hugetlb_lock); list_for_each_entry(page, &h->hugepage_activelist, lru) -- 2.28.0

3 years, 7 months

2
1
0 0

patch "iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on" added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 560c6b914c6ec7d9d9a69fddbb5bf3bf71433e8b Mon Sep 17 00:00:00 2001 From: Qinglang Miao <miaoqinglang(a)huawei.com> Date: Tue, 3 Nov 2020 20:07:43 +0800 Subject: iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume Fix the missing clk_disable_unprepare() of info->pclk before return from rockchip_saradc_resume in the error handling case when fails to prepare and enable info->clk. Suggested-by: Robin Murphy <robin.murphy(a)arm.com> Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc") Signed-off-by: Qinglang Miao <miaoqinglang(a)huawei.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20201103120743.110662-1-miaoqinglang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/rockchip_saradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index 1f3d7d639d37..12584f1631d8 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -462,7 +462,7 @@ static int rockchip_saradc_resume(struct device *dev) ret = clk_prepare_enable(info->clk); if (ret) - return ret; + clk_disable_unprepare(info->pclk); return ret; } -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio: imu: st_lsm6dsx: fix edge-trigger interrupts" added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: imu: st_lsm6dsx: fix edge-trigger interrupts to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 3f9bce7a22a3f8ac9d885c9d75bc45569f24ac8b Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi <lorenzo(a)kernel.org> Date: Sat, 14 Nov 2020 19:39:05 +0100 Subject: iio: imu: st_lsm6dsx: fix edge-trigger interrupts If we are using edge IRQs, new samples can arrive while processing current interrupt since there are no hw guarantees the irq line stays "low" long enough to properly detect the new interrupt. In this case the new sample will be missed. Polling FIFO status register in st_lsm6dsx_handler_thread routine allow us to read new samples even if the interrupt arrives while processing previous data and the timeslot where the line is "low" is too short to be properly detected. Fixes: 89ca88a7cdf2 ("iio: imu: st_lsm6dsx: support active-low interrupts") Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi <lorenzo(a)kernel.org> Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.16053788… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 ++++++++++++++++---- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 467214e2e77c..7cedaab096a7 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -2069,19 +2069,35 @@ st_lsm6dsx_report_motion_event(struct st_lsm6dsx_hw *hw) static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private) { struct st_lsm6dsx_hw *hw = private; + int fifo_len = 0, len; bool event; - int count; event = st_lsm6dsx_report_motion_event(hw); if (!hw->settings->fifo_ops.read_fifo) return event ? IRQ_HANDLED : IRQ_NONE; - mutex_lock(&hw->fifo_lock); - count = hw->settings->fifo_ops.read_fifo(hw); - mutex_unlock(&hw->fifo_lock); + /* + * If we are using edge IRQs, new samples can arrive while + * processing current interrupt since there are no hw + * guarantees the irq line stays "low" long enough to properly + * detect the new interrupt. In this case the new sample will + * be missed. + * Polling FIFO status register allow us to read new + * samples even if the interrupt arrives while processing + * previous data and the timeslot where the line is "low" is + * too short to be properly detected. + */ + do { + mutex_lock(&hw->fifo_lock); + len = hw->settings->fifo_ops.read_fifo(hw); + mutex_unlock(&hw->fifo_lock); + + if (len > 0) + fifo_len += len; + } while (len > 0); - return count || event ? IRQ_HANDLED : IRQ_NONE; + return fifo_len || event ? IRQ_HANDLED : IRQ_NONE; } static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) -- 2.29.2

3 years, 7 months

1
0
0 0

patch "counter: microchip-tcb-capture: Fix CMR value check" added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled counter: microchip-tcb-capture: Fix CMR value check to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 3418bd7cfce0bd8ef1ccedc4655f9f86f6c3b0ca Mon Sep 17 00:00:00 2001 From: William Breathitt Gray <vilhelm.gray(a)gmail.com> Date: Sat, 14 Nov 2020 18:28:05 -0500 Subject: counter: microchip-tcb-capture: Fix CMR value check The ATMEL_TC_ETRGEDG_* defines are not masks but rather possible values for CMR. This patch fixes the action_get() callback to properly check for these values rather than mask them. Fixes: 106b104137fd ("counter: Add microchip TCB capture counter") Signed-off-by: William Breathitt Gray <vilhelm.gray(a)gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Acked-by: Kamel Bouhara <kamel.bouhara(a)bootlin.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20201114232805.253108-1-vilhelm.gray@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/counter/microchip-tcb-capture.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c index 039c54a78aa5..710acc0a3704 100644 --- a/drivers/counter/microchip-tcb-capture.c +++ b/drivers/counter/microchip-tcb-capture.c @@ -183,16 +183,20 @@ static int mchp_tc_count_action_get(struct counter_device *counter, regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr); - *action = MCHP_TC_SYNAPSE_ACTION_NONE; - - if (cmr & ATMEL_TC_ETRGEDG_NONE) + switch (cmr & ATMEL_TC_ETRGEDG) { + default: *action = MCHP_TC_SYNAPSE_ACTION_NONE; - else if (cmr & ATMEL_TC_ETRGEDG_RISING) + break; + case ATMEL_TC_ETRGEDG_RISING: *action = MCHP_TC_SYNAPSE_ACTION_RISING_EDGE; - else if (cmr & ATMEL_TC_ETRGEDG_FALLING) + break; + case ATMEL_TC_ETRGEDG_FALLING: *action = MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE; - else if (cmr & ATMEL_TC_ETRGEDG_BOTH) + break; + case ATMEL_TC_ETRGEDG_BOTH: *action = MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE; + break; + } return 0; } -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio:adc:ti-ads124s08: Fix alignment and data leak issues." added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:adc:ti-ads124s08: Fix alignment and data leak issues. to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 1e405bc2512f80a903ddd6ba8740cee885238d7f Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 20 Sep 2020 12:27:42 +0100 Subject: iio:adc:ti-ads124s08: Fix alignment and data leak issues. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc() so no data can leak apart from previous readings. In this driver the timestamp can end up in various different locations depending on what other channels are enabled. As a result, we don't use a structure to specify it's position as that would be misleading. Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Reported-by: Lars-Peter Clausen <lars(a)metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Cc: Dan Murphy <dmurphy(a)ti.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200920112742.170751-9-jic23@kernel.org --- drivers/iio/adc/ti-ads124s08.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c index eff4f9a9898e..b4a128b19188 100644 --- a/drivers/iio/adc/ti-ads124s08.c +++ b/drivers/iio/adc/ti-ads124s08.c @@ -99,6 +99,14 @@ struct ads124s_private { struct gpio_desc *reset_gpio; struct spi_device *spi; struct mutex lock; + /* + * Used to correctly align data. + * Ensure timestamp is naturally aligned. + * Note that the full buffer length may not be needed if not + * all channels are enabled, as long as the alignment of the + * timestamp is maintained. + */ + u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u32)] __aligned(8); u8 data[5] ____cacheline_aligned; }; @@ -269,7 +277,6 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ads124s_private *priv = iio_priv(indio_dev); - u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u32)]; int scan_index, j = 0; int ret; @@ -284,7 +291,7 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p) if (ret) dev_err(&priv->spi->dev, "Start ADC conversions failed\n"); - buffer[j] = ads124s_read(indio_dev, scan_index); + priv->buffer[j] = ads124s_read(indio_dev, scan_index); ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV); if (ret) dev_err(&priv->spi->dev, "Stop ADC conversions failed\n"); @@ -292,7 +299,7 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p) j++; } - iio_push_to_buffers_with_timestamp(indio_dev, buffer, + iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer, pf->timestamp); iio_trigger_notify_done(indio_dev->trig); -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio:pressure:mpl3115: Force alignment of buffer" added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:pressure:mpl3115: Force alignment of buffer to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 198cf32f0503d2ad60d320b95ef6fb8243db857f Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 20 Sep 2020 12:27:40 +0100 Subject: iio:pressure:mpl3115: Force alignment of buffer Whilst this is another case of the issue Lars reported with an array of elements of smaller than 8 bytes being passed to iio_push_to_buffers_with_timestamp(), the solution here is a bit different from the other cases and relies on __aligned working on the stack (true since 4.6?) This one is unusual. We have to do an explicit memset() each time as we are reading 3 bytes into a potential 4 byte channel which may sometimes be a 2 byte channel depending on what is enabled. As such, moving the buffer to the heap in the iio_priv structure doesn't save us much. We can't use a nice explicit structure on the stack either as the data channels have different storage sizes and are all separately controlled. Fixes: cc26ad455f57 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Reported-by: Lars-Peter Clausen <lars(a)metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Cc: Peter Meerwald <pmeerw(a)pmeerw.net> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200920112742.170751-7-jic23@kernel.org --- drivers/iio/pressure/mpl3115.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c index ccdb0b70e48c..1eb9e7b29e05 100644 --- a/drivers/iio/pressure/mpl3115.c +++ b/drivers/iio/pressure/mpl3115.c @@ -144,7 +144,14 @@ static irqreturn_t mpl3115_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mpl3115_data *data = iio_priv(indio_dev); - u8 buffer[16]; /* 32-bit channel + 16-bit channel + padding + ts */ + /* + * 32-bit channel + 16-bit channel + padding + ts + * Note that it is possible for only one of the first 2 + * channels to be enabled. If that happens, the first element + * of the buffer may be either 16 or 32-bits. As such we cannot + * use a simple structure definition to express this data layout. + */ + u8 buffer[16] __aligned(8); int ret, pos = 0; mutex_lock(&data->lock); -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio:adc:ti-ads124s08: Fix buffer being too long." added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:adc:ti-ads124s08: Fix buffer being too long. to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From b0bd27f02d768e3a861c4e6c27f8e369720e6c25 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 20 Sep 2020 12:27:41 +0100 Subject: iio:adc:ti-ads124s08: Fix buffer being too long. The buffer is expressed as a u32 array, yet the extra space for the s64 timestamp was expressed as sizeof(s64)/sizeof(u16). This will result in 2 extra u32 elements. Fix by dividing by sizeof(u32). Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Jonathan Cameron<Jonathan.Cameron(a)huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Cc: Dan Murphy <dmurphy(a)ti.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200920112742.170751-8-jic23@kernel.org --- drivers/iio/adc/ti-ads124s08.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c index 4b4fbe33930c..eff4f9a9898e 100644 --- a/drivers/iio/adc/ti-ads124s08.c +++ b/drivers/iio/adc/ti-ads124s08.c @@ -269,7 +269,7 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ads124s_private *priv = iio_priv(indio_dev); - u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)]; + u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u32)]; int scan_index, j = 0; int ret; -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio:imu:bmi160: Fix alignment and data leak issues" added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:imu:bmi160: Fix alignment and data leak issues to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From 7b6b51234df6cd8b04fe736b0b89c25612d896b8 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 20 Sep 2020 12:27:39 +0100 Subject: iio:imu:bmi160: Fix alignment and data leak issues One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable array in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc() so no data can leak apart from previous readings. In this driver, depending on which channels are enabled, the timestamp can be in a number of locations. Hence we cannot use a structure to specify the data layout without it being misleading. Fixes: 77c4ad2d6a9b ("iio: imu: Add initial support for Bosch BMI160") Reported-by: Lars-Peter Clausen <lars(a)metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Cc: Daniel Baluta <daniel.baluta(a)gmail.com> Cc: Daniel Baluta <daniel.baluta(a)oss.nxp.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200920112742.170751-6-jic23@kernel.org --- drivers/iio/imu/bmi160/bmi160.h | 7 +++++++ drivers/iio/imu/bmi160/bmi160_core.c | 6 ++---- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h index a82e040bd109..32c2ea2d7112 100644 --- a/drivers/iio/imu/bmi160/bmi160.h +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -10,6 +10,13 @@ struct bmi160_data { struct iio_trigger *trig; struct regulator_bulk_data supplies[2]; struct iio_mount_matrix orientation; + /* + * Ensure natural alignment for timestamp if present. + * Max length needed: 2 * 3 channels + 4 bytes padding + 8 byte ts. + * If fewer channels are enabled, less space may be needed, as + * long as the timestamp is still aligned to 8 bytes. + */ + __le16 buf[12] __aligned(8); }; extern const struct regmap_config bmi160_regmap_config; diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index c8e131c29043..290b5ef83f77 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -427,8 +427,6 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmi160_data *data = iio_priv(indio_dev); - __le16 buf[12]; - /* 2 sens x 3 axis x __le16 + 2 x __le16 pad + 4 x __le16 tstamp */ int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; __le16 sample; @@ -438,10 +436,10 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p) &sample, sizeof(sample)); if (ret) goto done; - buf[j++] = sample; + data->buf[j++] = sample; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, data->buf, pf->timestamp); done: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; -- 2.29.2

3 years, 7 months

1
0
0 0

patch "iio:imu:bmi160: Fix too large a buffer." added to staging-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:imu:bmi160: Fix too large a buffer. to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the staging-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. >From dc7de42d6b50a07b37feeba4c6b5136290fcee81 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 20 Sep 2020 12:27:38 +0100 Subject: iio:imu:bmi160: Fix too large a buffer. The comment implies this device has 3 sensor types, but it only has an accelerometer and a gyroscope (both 3D). As such the buffer does not need to be as long as stated. Note I've separated this from the following patch which fixes the alignment for passing to iio_push_to_buffers_with_timestamp() as they are different issues even if they affect the same line of code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean(a)analog.com> Cc: Daniel Baluta <daniel.baluta(a)oss.nxp.com> Cc: <Stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200920112742.170751-5-jic23@kernel.org --- drivers/iio/imu/bmi160/bmi160_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index 431076dc0d2c..c8e131c29043 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -427,8 +427,8 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmi160_data *data = iio_priv(indio_dev); - __le16 buf[16]; - /* 3 sens x 3 axis x __le16 + 3 x __le16 pad + 4 x __le16 tstamp */ + __le16 buf[12]; + /* 2 sens x 3 axis x __le16 + 2 x __le16 pad + 4 x __le16 tstamp */ int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; __le16 sample; -- 2.29.2

3 years, 7 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2020