July 2020 - Linux-stable-mirror

[FOR-STABLE-3.9+] sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds

by Viresh Kumar

From: Shile Zhang <shile.zhang(a)nokia.com> We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit: ce0dbbbb30ae ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice") ... which name suggests to users that it's in milliseconds, while in reality it's being set in milliseconds but the result is shown in jiffies. This is obviously confusing when HZ is not 1000, it makes it appear like the value set failed, such as HZ=100: root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms root# cat /proc/sys/kernel/sched_rr_timeslice_ms 10 Fix this to be milliseconds all around. Cc: <stable(a)vger.kernel.org> # v3.9+ Signed-off-by: Shile Zhang <shile.zhang(a)nokia.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Mike Galbraith <efault(a)gmx.de> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Link: http://lkml.kernel.org/r/1485612049-20923-1-git-send-email-shile.zhang@noki… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- include/linux/sched/sysctl.h | 1 + kernel/sched/core.c | 5 +++-- kernel/sched/rt.c | 1 + kernel/sysctl.c | 2 +- 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/linux/sched/sysctl.h b/include/linux/sched/sysctl.h index 596a0e007c62..7cae31be37cf 100644 --- a/include/linux/sched/sysctl.h +++ b/include/linux/sched/sysctl.h @@ -93,6 +93,7 @@ extern unsigned int sysctl_sched_cfs_bandwidth_slice; extern unsigned int sysctl_sched_autogroup_enabled; #endif +extern int sysctl_sched_rr_timeslice; extern int sched_rr_timeslice; extern int sched_rr_handler(struct ctl_table *table, int write, diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 45dd606138b0..df6daf7301ee 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7804,8 +7804,9 @@ int sched_rr_handler(struct ctl_table *table, int write, /* make sure that internally we keep jiffies */ /* also, writing zero resets timeslice to default */ if (!ret && write) { - sched_rr_timeslice = sched_rr_timeslice <= 0 ? - RR_TIMESLICE : msecs_to_jiffies(sched_rr_timeslice); + sched_rr_timeslice = + sysctl_sched_rr_timeslice <= 0 ? RR_TIMESLICE : + msecs_to_jiffies(sysctl_sched_rr_timeslice); } mutex_unlock(&mutex); return ret; diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index e0e5b3314c5b..5523766af665 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -8,6 +8,7 @@ #include <linux/slab.h> int sched_rr_timeslice = RR_TIMESLICE; +int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE; static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun); diff --git a/kernel/sysctl.c b/kernel/sysctl.c index c5da3c8a67e8..db51f7b0e7a2 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -421,7 +421,7 @@ static struct ctl_table kern_table[] = { }, { .procname = "sched_rr_timeslice_ms", - .data = &sched_rr_timeslice, + .data = &sysctl_sched_rr_timeslice, .maxlen = sizeof(int), .mode = 0644, .proc_handler = sched_rr_handler, -- 2.25.0.rc1.19.g042ed3e048af

3 years, 10 months

3
3
0 0

[PATCH 4.19 000/131] 4.19.131-rc1 review

by Sasha Levin

This is the start of the stable review cycle for the 4.19.131 release. There are 131 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Wed 01 Jul 2020 03:34:57 PM UTC. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y and the diffstat can be found below. -- Thanks, Sasha ------------------------- Pseudo-Shortlog of commits: Aaron Plattner (1): ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table Aditya Pakki (1): rocker: fix incorrect error handling in dma_rings_init Al Cooper (1): xhci: Fix enumeration issue when setting max packet size for FS devices. Al Viro (1): fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" Alexander Lobakin (3): net: qed: fix left elements count calculation net: qed: fix NVMe login fails over VFs net: qed: fix excessive QM ILT lines consumption Amir Goldstein (1): fanotify: fix ignore mask logic for events on child and on dir Anton Eidelman (1): nvme-multipath: fix deadlock between ana_work and scan_work Charles Keepax (1): regmap: Fix memory leak from regmap_register_patch Chuck Lever (1): SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() Chuhong Yuan (1): USB: ohci-sm501: Add missed iounmap() in remove Dan Carpenter (3): x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() usb: gadget: udc: Potential Oops in error handling code Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() Daniel Gomez (1): drm: rcar-du: Fix build error Dave Martin (1): arm64/sve: Eliminate data races on sve_default_vl David Christensen (1): tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes David Howells (2): rxrpc: Fix notification call on completion of discarded calls rxrpc: Fix handling of rwind from an ACK packet Denis Efremov (2): drm/amd/display: Use kfree() to free rgb_user in calculate_user_regamma_ramp() drm/radeon: fix fb_div check in ni_init_smc_spll_table() Denis Kirjanov (1): tcp: don't ignore ECN CWR on pure ACK Dinghao Liu (1): hwrng: ks-sa - Fix runtime PM imbalance on error Doug Berger (2): net: bcmgenet: remove HFB_CTRL access net: bcmgenet: use hardware padding of runt frames Eddie James (1): i2c: fsi: Fix the port number field in status register Eric Dumazet (3): net: be more gentle about silly gso requests coming from user net: increment xmit_recursion level in dev_direct_xmit() tcp: grow window for OOO packets only for SACK flows Fan Guo (1): RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads() Filipe Manana (2): btrfs: fix data block group relocation failure due to concurrent scrub btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof Florian Fainelli (1): net: phy: Check harder for errors in get_phy_id() Florian Westphal (2): net: place xmit recursion in softnet data net: use correct this_cpu primitive in dev_recursion_level Gao Xiang (1): erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup Huaisheng Ye (1): dm writecache: correct uncommitted_block when discarding uncommitted entry Huy Nguyen (1): xfrm: Fix double ESP trailer insertion in IPsec crypto offload. Ilya Ponetayev (1): sch_cake: don't try to reallocate or unshare skb unconditionally Jann Horn (1): apparmor: don't try to replace stale label in ptraceme check Jeremy Kerr (1): net: usb: ax88179_178a: fix packet alignment padding Jiping Ma (1): arm64: perf: Report the PC value in REGS_ABI_32 mode Joakim Tjernlund (1): cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip Josef Bacik (1): btrfs: make caching_thread use btrfs_find_next_key Junxiao Bi (4): ocfs2: avoid inode removal while nfsd is accessing it ocfs2: load global_inode_alloc ocfs2: fix value of OCFS2_INVALID_SLOT ocfs2: fix panic on nfs server over ocfs2 Juri Lelli (2): sched/deadline: Initialize ->dl_boosted sched/core: Fix PI boosting between RT and DEADLINE tasks Kai-Heng Feng (4): ALSA: hda/realtek: Enable mute LED on an HP system ALSA: hda/realtek - Enable micmute LED on and HP system xhci: Poll for U0 after disabling USB2 LPM xhci: Return if xHCI doesn't support LPM Keith Busch (1): nvme-multipath: set bdi capabilities once Li Jun (1): usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs Longfang Liu (1): USB: ehci: reopen solution for Synopsys HC bug Luis Chamberlain (1): blktrace: break out of blktrace setup on concurrent calls Macpaul Lin (2): usb: host: xhci-mtk: avoid runtime suspend when removing hcd ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG) Mans Rullgard (1): i2c: core: check returned size of emulated smbus block read Marcelo Ricardo Leitner (1): sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket Mark Zhang (1): RDMA/cma: Protect bind_list and listen_list while finding matching cm id Masahiro Yamada (1): kbuild: improve cc-option to clean up all temporary files Masami Hiramatsu (1): tracing: Fix event trigger to accept redundant spaces Mathias Nyman (1): xhci: Fix incorrect EP_STATE_MASK Matt Fleming (1): x86/asm/64: Align start of __clear_user() loop to 16-bytes Matthew Hagan (1): ARM: dts: NSP: Correct FA2 mailbox node Michal Kalderon (1): RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532 Mikulas Patocka (1): dm writecache: add cond_resched to loop in persistent_memory_claim() Minas Harutyunyan (1): usb: dwc2: Postponed gadget registration to the udc class driver Miquel Raynal (1): mtd: rawnand: marvell: Fix the condition on a return code Nathan Chancellor (1): ACPI: sysfs: Fix pm_profile_attr type Nathan Huckleberry (1): riscv/atomic: Fix sign extension for RV64I Navid Emamdoost (1): sata_rcar: handle pm_runtime_get_sync failure cases Neal Cardwell (1): tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT Olga Kornievskaia (1): NFSv4 fix CLOSE not waiting for direct IO compeletion Qiushi Wu (2): efi/esrt: Fix reference count leak in esre_create_sysfs_entry. ASoC: rockchip: Fix a reference count leak. Rahul Lakkireddy (1): cxgb4: move handling L2T ARP failures to caller Robin Gong (1): regualtor: pfuze100: correct sw1a/sw2 on pfuze3000 Russell King (1): netfilter: ipset: fix unaligned atomic access Sagi Grimberg (1): nvme: fix possible deadlock when I/O is blocked Sasha Levin (2): ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294 Linux 4.19.131-rc1 Sean Christopherson (1): KVM: nVMX: Plumb L2 GPA through to PML emulation Shay Drory (1): IB/mad: Fix use after free when destroying MAD agent Shengjiu Wang (1): ASoC: fsl_ssi: Fix bclk calculation for mono channel Sowjanya Komatineni (1): i2c: tegra: Fix Maximum transfer size Srinivas Kandagatla (1): ASoC: q6asm: handle EOS correctly Steffen Maier (1): scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action Steven Rostedt (VMware) (1): ring-buffer: Zero out time extend if it is nested and not absolute Sven Schnelle (1): s390/ptrace: fix setting syscall number Taehee Yoo (3): ip6_gre: fix use-after-free in ip6gre_tunnel_lookup() ip_tunnel: fix use-after-free in ip_tunnel_lookup() net: core: reduce recursion limit value Takashi Iwai (2): ALSA: usb-audio: Fix OOB access of mixer element list ALSA: hda/realtek - Add quirk for MSI GE63 laptop Tang Bin (1): usb: host: ehci-exynos: Fix error check in exynos_ehci_probe() Tariq Toukan (1): net: Do not clear the sock TX queue in sk_set_socket() Thierry Reding (2): i2c: tegra: Cleanup kerneldoc comments i2c: tegra: Add missing kerneldoc for some fields Thomas Falcon (2): ibmveth: Fix max MTU limit ibmvnic: Harden device login requests Thomas Martitz (1): net: bridge: enfore alignment for ethernet address Toke Høiland-Jørgensen (2): sch_cake: fix a few style nits sch_cake: don't call diffserv parsing code when it is not needed Tomasz Meresiński (1): usb: add USB_QUIRK_DELAY_INIT for Logitech C922 Tony Lindgren (1): ARM: dts: Fix duovero smsc interrupt for suspend Trond Myklebust (1): pNFS/flexfiles: Fix list corruption if the mirror count changes Valentin Longchamp (1): net: sched: export __netdev_watchdog_up() Vasily Averin (1): sunrpc: fixed rollback in rpc_gssd_dummy_populate() Vincenzo Frascino (1): s390/vdso: fix vDSO clock_getres() Waiman Long (1): mm/slab: use memzero_explicit() in kzfree() Wang Hai (1): mld: fix memory leak in ipv6_mc_destroy_dev() Will Deacon (1): arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n Xiaoyao Li (1): KVM: X86: Fix MSR range of APIC registers in X2APIC mode Yang Yingliang (1): net: fix memleak in register_netdevice() Yash Shah (1): RISC-V: Don't allow write+exec only page mapping request in mmap Yazen Ghannam (1): EDAC/amd64: Add Family 17h Model 30h PCI IDs Ye Bin (1): ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function Yick W. Tse (1): ALSA: usb-audio: add quirk for Denon DCD-1500RE Zekun Shen (1): net: alx: fix race condition in alx_remove Zhang Xiaoxu (2): cifs/smb3: Fix data inconsistent when punch hole cifs/smb3: Fix data inconsistent when zero file range Zheng Bin (2): loop: replace kill_bdev with invalidate_bdev xfs: add agf freeblocks verify in xfs_agf_verify guodeqing (1): net: Fix the arp error in some cases yu kuai (2): block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() Makefile | 4 +- arch/arm/boot/dts/bcm-nsp.dtsi | 6 +- arch/arm/boot/dts/omap4-duovero-parlor.dts | 2 +- arch/arm/mach-imx/pm-imx5.c | 6 +- arch/arm64/kernel/fpsimd.c | 31 ++++++---- arch/arm64/kernel/perf_regs.c | 25 +++++++- arch/riscv/include/asm/cmpxchg.h | 8 +-- arch/riscv/kernel/sys_riscv.c | 6 ++ arch/s390/include/asm/vdso.h | 1 + arch/s390/kernel/asm-offsets.c | 2 +- arch/s390/kernel/ptrace.c | 31 +++++++++- arch/s390/kernel/time.c | 1 + arch/s390/kernel/vdso64/clock_getres.S | 10 ++-- arch/sparc/kernel/ptrace_32.c | 9 ++- arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 1 + arch/x86/kvm/mmu.c | 4 +- arch/x86/kvm/mmu.h | 2 +- arch/x86/kvm/paging_tmpl.h | 7 ++- arch/x86/kvm/vmx.c | 5 +- arch/x86/kvm/x86.c | 4 +- arch/x86/lib/usercopy_64.c | 1 + block/bio-integrity.c | 1 - drivers/acpi/sysfs.c | 4 +- drivers/ata/libata-scsi.c | 9 ++- drivers/ata/sata_rcar.c | 11 ++-- drivers/base/regmap/regmap.c | 1 + drivers/block/loop.c | 6 +- drivers/char/hw_random/ks-sa-rng.c | 1 + drivers/edac/amd64_edac.c | 13 ++++ drivers/edac/amd64_edac.h | 3 + drivers/firmware/efi/esrt.c | 2 +- .../amd/display/modules/color/color_gamma.c | 2 +- drivers/gpu/drm/radeon/ni_dpm.c | 2 +- drivers/gpu/drm/rcar-du/Kconfig | 1 + drivers/i2c/busses/i2c-fsi.c | 2 +- drivers/i2c/busses/i2c-tegra.c | 53 ++++++++++++---- drivers/i2c/i2c-core-smbus.c | 7 +++ drivers/infiniband/core/cma.c | 18 ++++++ drivers/infiniband/core/mad.c | 3 +- drivers/infiniband/hw/qedr/qedr_iw_cm.c | 13 +++- drivers/md/dm-writecache.c | 4 ++ drivers/mtd/nand/raw/marvell_nand.c | 2 +- drivers/net/ethernet/atheros/alx/main.c | 9 +-- .../net/ethernet/broadcom/genet/bcmgenet.c | 8 +-- .../ethernet/broadcom/genet/bcmgenet_wol.c | 4 -- drivers/net/ethernet/broadcom/tg3.c | 4 +- drivers/net/ethernet/chelsio/cxgb4/l2t.c | 52 ++++++++-------- drivers/net/ethernet/ibm/ibmveth.c | 2 +- drivers/net/ethernet/ibm/ibmvnic.c | 21 +++++-- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_vf.c | 23 +++++-- drivers/net/ethernet/rocker/rocker_main.c | 4 +- drivers/net/phy/phy_device.c | 6 +- drivers/net/usb/ax88179_178a.c | 11 ++-- drivers/nvme/host/core.c | 1 - drivers/nvme/host/multipath.c | 32 +++++++--- drivers/regulator/pfuze100-regulator.c | 60 ++++++++++++------- drivers/s390/scsi/zfcp_erp.c | 13 +++- drivers/staging/erofs/unzip_vle.h | 20 +++---- .../staging/rtl8723bs/core/rtw_wlan_util.c | 4 +- drivers/usb/class/cdc-acm.c | 2 + drivers/usb/core/quirks.c | 3 +- drivers/usb/dwc2/gadget.c | 6 -- drivers/usb/dwc2/platform.c | 11 ++++ drivers/usb/gadget/udc/mv_udc_core.c | 3 +- drivers/usb/host/ehci-exynos.c | 5 +- drivers/usb/host/ehci-pci.c | 7 +++ drivers/usb/host/ohci-sm501.c | 1 + drivers/usb/host/xhci-mtk.c | 5 +- drivers/usb/host/xhci.c | 9 ++- drivers/usb/host/xhci.h | 2 +- drivers/usb/typec/tcpci_rt1711h.c | 31 ++++------ fs/btrfs/ctree.c | 4 +- fs/btrfs/extent-tree.c | 2 +- fs/btrfs/inode.c | 22 +++++-- fs/cifs/smb2ops.c | 12 ++++ fs/nfs/direct.c | 13 ++-- fs/nfs/file.c | 1 + fs/nfs/flexfilelayout/flexfilelayout.c | 11 ++-- fs/notify/fanotify/fanotify.c | 5 +- fs/ocfs2/dlmglue.c | 17 +++++- fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/ocfs2_fs.h | 4 +- fs/ocfs2/suballoc.c | 9 ++- fs/xfs/libxfs/xfs_alloc.c | 16 +++++ include/linux/netdevice.h | 40 ++++++++++--- include/linux/qed/qed_chain.h | 26 ++++---- include/linux/virtio_net.h | 17 +++--- include/net/sctp/constants.h | 8 ++- include/net/sock.h | 1 - include/net/xfrm.h | 1 + kernel/sched/core.c | 3 +- kernel/sched/deadline.c | 1 + kernel/trace/blktrace.c | 13 ++++ kernel/trace/ring_buffer.c | 2 +- kernel/trace/trace_events_trigger.c | 21 ++++++- mm/slab_common.c | 2 +- net/bridge/br_private.h | 2 +- net/core/dev.c | 19 +++--- net/core/filter.c | 6 +- net/core/sock.c | 4 +- net/ipv4/fib_semantics.c | 2 +- net/ipv4/ip_tunnel.c | 14 +++-- net/ipv4/tcp_cubic.c | 2 + net/ipv4/tcp_input.c | 26 ++++++-- net/ipv6/ip6_gre.c | 9 ++- net/ipv6/mcast.c | 1 + net/netfilter/ipset/ip_set_core.c | 2 + net/rxrpc/call_accept.c | 7 +++ net/rxrpc/input.c | 7 +-- net/sched/sch_cake.c | 58 ++++++++++++------ net/sched/sch_generic.c | 1 + net/sctp/associola.c | 5 +- net/sctp/bind_addr.c | 1 + net/sctp/protocol.c | 3 +- net/sunrpc/rpc_pipe.c | 1 + net/sunrpc/xdr.c | 4 ++ net/xfrm/xfrm_device.c | 4 +- scripts/Kbuild.include | 11 ++-- security/apparmor/lsm.c | 4 +- sound/pci/hda/patch_hdmi.c | 5 ++ sound/pci/hda/patch_realtek.c | 32 +++++++++- sound/soc/fsl/fsl_ssi.c | 13 ++-- sound/soc/qcom/qdsp6/q6asm.c | 7 ++- sound/soc/rockchip/rockchip_pdm.c | 4 +- sound/usb/mixer.c | 15 +++-- sound/usb/mixer.h | 9 ++- sound/usb/mixer_quirks.c | 3 +- sound/usb/quirks.c | 9 +++ 130 files changed, 875 insertions(+), 354 deletions(-) -- 2.25.1

3 years, 10 months

11
147
0 0

[PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

by Hauke Mehrtens

This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd935c34b ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by: Hauke Mehrtens <hauke(a)hauke-m.de> Cc: <stable(a)vger.kernel.org> --- arch/mips/kernel/traps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 7c32c956156a..1234ea21dd8f 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2169,6 +2169,7 @@ static void configure_status(void) change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, status_set); + back_to_back_c0_hazard(); } unsigned int hwrena; -- 2.20.1

3 years, 10 months

3
4
0 0

[PATCH 5/9] phy: qcom-qmp: use correct values for ipq8074 gen2 pcie phy init

by Sivaprakash Murugesan

There were some problem in ipq8074 gen2 pcie phy init sequence, fix these to make gen2 pcie port on ipq8074 to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable(a)vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan <speriaka(a)codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka(a)codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak(a)codeaurora.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..ba277136f52b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -504,8 +504,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), @@ -531,7 +531,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), @@ -540,7 +539,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), - QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), }; static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -548,6 +546,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), }; static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -558,7 +558,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), - QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), }; static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1673,6 +1672,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, }; +static const char * const ipq8074_pciephy_clk_l[] = { + "aux", "cfg_ahb", +}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1690,8 +1692,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), - .clk_list = NULL, - .num_clks = 0, + .clk_list = ipq8074_pciephy_clk_l, + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), .reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..832b3d098403 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc /* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 -- 2.7.4

3 years, 10 months

1
0
0 0

[PATCH 5/9] phy: qcom-qmp: use correct values for ipq8074 gen2 pcie phy init

by Sivaprakash Murugesan

There were some problem in ipq8074 gen2 pcie phy init sequence, fix these to make gen2 pcie port on ipq8074 to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable(a)vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan <speriaka(a)codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka(a)codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak(a)codeaurora.org> --- drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..ba277136f52b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -504,8 +504,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), @@ -531,7 +531,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), @@ -540,7 +539,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), - QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), }; static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -548,6 +546,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), }; static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -558,7 +558,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), - QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), }; static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1673,6 +1672,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, }; +static const char * const ipq8074_pciephy_clk_l[] = { + "aux", "cfg_ahb", +}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1690,8 +1692,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), - .clk_list = NULL, - .num_clks = 0, + .clk_list = ipq8074_pciephy_clk_l, + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), .reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..832b3d098403 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc /* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 -- 2.7.4

3 years, 10 months

1
0
0 0

✅ PASS: Test report for kernel 5.7.7-80c2bf0.cki (stable-queue)

by CKI Project

Hello, We ran automated tests on a recent commit from this kernel tree: Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Commit: 80c2bf022de2 - kgdb: Avoid suspicious RCU usage warning The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK All kernel binaries, config files, and logs are available for download here: https://cki-artifacts.s3.us-east-2.amazonaws.com/index.html?prefix=dataware… Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Compile testing --------------- We compiled the kernel for 4 architectures: aarch64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg ppc64le: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg s390x: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg x86_64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test ✅ ACPI table test ✅ ACPI enabled test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - DaCapo Benchmark Suite 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer 🚧 ✅ kdump - kexec_boot Host 2: ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing ✅ stress: stress-ng 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ Storage blktests ppc64le: Host 1: ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ Storage blktests Host 2: ✅ Boot test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - DaCapo Benchmark Suite 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer Host 3: ✅ Boot test 🚧 ✅ kdump - sysrq-c s390x: Host 1: ✅ Boot test 🚧 ✅ kdump - sysrq-c Host 2: ✅ Boot test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - DaCapo Benchmark Suite 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer 🚧 ✅ kdump - kexec_boot Host 3: ✅ Boot test ✅ selinux-policy: serge-testsuite ✅ stress: stress-ng 🚧 ✅ Storage blktests x86_64: Host 1: ✅ Boot test 🚧 ✅ kdump - sysrq-c Host 2: ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing ✅ stress: stress-ng 🚧 ✅ CPU: Frequency Driver Test 🚧 ✅ CPU: Idle Test 🚧 ✅ IOMMU boot test 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ power-management: cpupower/sanity test 🚧 ✅ Storage blktests Host 3: ✅ Boot test ✅ ACPI table test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: sanity smoke test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - DaCapo Benchmark Suite 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer 🚧 ✅ kdump - kexec_boot Test sources: https://gitlab.com/cki-project/kernel-tests 💚 Pull requests are welcome for new tests or improvements to existing tests! Aborted tests ------------- Tests that didn't complete running successfully are marked with ⚡⚡⚡. If this was caused by an infrastructure issue, we try to mark that explicitly in the report. Waived tests ------------ If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed. Testing timeout --------------- We aim to provide a report within reasonable timeframe. Tests that haven't finished running yet are marked with ⏱.

3 years, 10 months

1
0
0 0

[PATCH] dt-bindings: iio: bmc150_magn: Document missing compatibles

by Krzysztof Kozlowski

The driver supports also BMC156B and BMM150B so document the compatibles for these devices. Fixes: 9d75db36df14 ("iio: magn: Add support for BMM150 magnetometer") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- The fixes tag is not accurate but at least offer some backporting. --- .../devicetree/bindings/iio/magnetometer/bmc150_magn.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt index fd5fca90fb39..7469073022db 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -4,7 +4,10 @@ http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150… Required properties: - - compatible : should be "bosch,bmc150_magn" + - compatible : should be one of: + "bosch,bmc150_magn" + "bosch,bmc156_magn" + "bosch,bmm150_magn" - reg : the I2C address of the magnetometer Optional properties: -- 2.17.1

3 years, 10 months

2
5
0 0

[git:media_tree/master] media: venus: fix multiple encoder crash

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: venus: fix multiple encoder crash Author: Mansur Alisha Shaik <mansur(a)codeaurora.org> Date: Fri May 1 08:28:00 2020 +0200 Currently we are considering the instances which are available in core->inst list for load calculation in min_loaded_core() function, but this is incorrect because by the time we call decide_core() for second instance, the third instance not filled yet codec_freq_data pointer. Solve this by considering the instances whose session has started. Cc: stable(a)vger.kernel.org # v5.7+ Fixes: 4ebf969375bc ("media: venus: introduce core selection") Tested-by: Douglas Anderson <dianders(a)chromium.org> Signed-off-by: Mansur Alisha Shaik <mansur(a)codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov(a)linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/platform/qcom/venus/pm_helpers.c | 4 ++++ 1 file changed, 4 insertions(+) --- diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c index abf93158857b..531e7a41658f 100644 --- a/drivers/media/platform/qcom/venus/pm_helpers.c +++ b/drivers/media/platform/qcom/venus/pm_helpers.c @@ -496,6 +496,10 @@ min_loaded_core(struct venus_inst *inst, u32 *min_coreid, u32 *min_load) list_for_each_entry(inst_pos, &core->instances, list) { if (inst_pos == inst) continue; + + if (inst_pos->state != INST_START) + continue; + vpp_freq = inst_pos->clk_data.codec_freq_data->vpp_freq; coreid = inst_pos->clk_data.core_id;

3 years, 10 months

1
0
0 0

[git:media_tree/master] media: vsp1: dl: Fix NULL pointer dereference on unbind

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: vsp1: dl: Fix NULL pointer dereference on unbind Author: Eugeniu Rosca <erosca(a)de.adit-jv.com> Date: Tue Jun 2 21:50:16 2020 +0200 In commit f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools"), the vsp pointer used for referencing the VSP1 device structure from a command pool during vsp1_dl_ext_cmd_pool_destroy() was not populated. Correctly assign the pointer to prevent the following null-pointer-dereference when removing the device: [*] h3ulcb-kf #> echo fea28000.vsp > /sys/bus/platform/devices/fea28000.vsp/driver/unbind Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007318be000 [0000000000000028] pgd=00000007333a1003, pud=00000007333a6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 486 Comm: sh Not tainted 5.7.0-rc6-arm64-renesas-00118-ge644645abf47 #185 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : vsp1_dlm_destroy+0xe4/0x11c lr : vsp1_dlm_destroy+0xc8/0x11c sp : ffff800012963b60 x29: ffff800012963b60 x28: ffff0006f83fc440 x27: 0000000000000000 x26: ffff0006f5e13e80 x25: ffff0006f5e13ed0 x24: ffff0006f5e13ed0 x23: ffff0006f5e13ed0 x22: dead000000000122 x21: ffff0006f5e3a080 x20: ffff0006f5df2938 x19: ffff0006f5df2980 x18: 0000000000000003 x17: 0000000000000000 x16: 0000000000000016 x15: 0000000000000003 x14: 00000000000393c0 x13: ffff800011a5ec18 x12: ffff800011d8d000 x11: ffff0006f83fcc68 x10: ffff800011a53d70 x9 : ffff8000111f3000 x8 : 0000000000000000 x7 : 0000000000210d00 x6 : 0000000000000000 x5 : ffff800010872e60 x4 : 0000000000000004 x3 : 0000000078068000 x2 : ffff800012781000 x1 : 0000000000002c00 x0 : 0000000000000000 Call trace: vsp1_dlm_destroy+0xe4/0x11c vsp1_wpf_destroy+0x10/0x20 vsp1_entity_destroy+0x24/0x4c vsp1_destroy_entities+0x54/0x130 vsp1_remove+0x1c/0x40 platform_drv_remove+0x28/0x50 __device_release_driver+0x178/0x220 device_driver_detach+0x44/0xc0 unbind_store+0xe0/0x104 drv_attr_store+0x20/0x30 sysfs_kf_write+0x48/0x70 kernfs_fop_write+0x148/0x230 __vfs_write+0x18/0x40 vfs_write+0xdc/0x1c4 ksys_write+0x68/0xf0 __arm64_sys_write+0x18/0x20 el0_svc_common.constprop.0+0x70/0x170 do_el0_svc+0x20/0x80 el0_sync_handler+0x134/0x1b0 el0_sync+0x140/0x180 Code: b40000c2 f9403a60 d2800084 a9400663 (f9401400) ---[ end trace 3875369841fb288a ]--- Fixes: f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools") Cc: stable(a)vger.kernel.org # v4.19+ Signed-off-by: Eugeniu Rosca <erosca(a)de.adit-jv.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/platform/vsp1/vsp1_dl.c | 2 ++ 1 file changed, 2 insertions(+) --- diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c index d7b43037e500..e07b135613eb 100644 --- a/drivers/media/platform/vsp1/vsp1_dl.c +++ b/drivers/media/platform/vsp1/vsp1_dl.c @@ -431,6 +431,8 @@ vsp1_dl_cmd_pool_create(struct vsp1_device *vsp1, enum vsp1_extcmd_type type, if (!pool) return NULL; + pool->vsp1 = vsp1; + spin_lock_init(&pool->lock); INIT_LIST_HEAD(&pool->free);

3 years, 10 months

1
0
0 0

[patch 3/5] mm/cma.c: use exact_nid true to fix possible per-numa cma leak

by Andrew Morton

From: Barry Song <song.bao.hua(a)hisilicon.com> Subject: mm/cma.c: use exact_nid true to fix possible per-numa cma leak Calling cma_declare_contiguous_nid() with false exact_nid for per-numa reservation can easily cause cma leak and various confusion. For example, mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it can easily leak cma and make users confused when system has memoryless nodes. In case the system has 4 numa nodes, and only numa node0 has memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will never be available to hugepage will only allocate memory from hugetlb_cma[0]. In case the system has 4 numa nodes, both numa node0&2 has memory, other nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0 or 2, but hugetlb_cma[1] and [3] will never be available to hugepage as mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and hugetlb_cma[2]. This causes permanent leak of the cma areas which are supposed to be used by memoryless node. Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma areas in alloc_gigantic_page() even node_mask includes node0 only. that means when node_mask includes node0 only, we can get page from hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in free_gigantic_page() while it wants to free page by: cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order) On the other hand, exact_nid=false won't consider numa distance, it might be not that useful to leverage cma areas on remote nodes. I feel it is much simpler to make exact_nid true to make everything clear. After that, memoryless nodes won't be able to reserve per-numa CMA from other nodes which have memory. Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua(a)hisilicon.com> Acked-by: Roman Gushchin <guro(a)fb.com> Cc: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Cc: Aslan Bakirov <aslan(a)fb.com> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: Andreas Schaufler <andreas.schaufler(a)gmx.de> Cc: Mike Kravetz <mike.kravetz(a)oracle.com> Cc: Rik van Riel <riel(a)surriel.com> Cc: Joonsoo Kim <js1304(a)gmail.com> Cc: Robin Murphy <robin.murphy(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/cma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/mm/cma.c~mm-cmac-use-exact_nid-true-to-fix-possible-per-numa-cma-leak +++ a/mm/cma.c @@ -339,13 +339,13 @@ int __init cma_declare_contiguous_nid(ph */ if (base < highmem_start && limit > highmem_start) { addr = memblock_alloc_range_nid(size, alignment, - highmem_start, limit, nid, false); + highmem_start, limit, nid, true); limit = highmem_start; } if (!addr) { addr = memblock_alloc_range_nid(size, alignment, base, - limit, nid, false); + limit, nid, true); if (!addr) { ret = -ENOMEM; goto err; _

3 years, 10 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2020