May 2021 - Linux-stable-mirror

FAILED: patch "[PATCH] btrfs: fix a potential hole punching failure" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 3227788cd369d734d2d3cd94f8af7536b60fa552 Mon Sep 17 00:00:00 2001 From: BingJing Chang <bingjingc(a)synology.com> Date: Thu, 25 Mar 2021 09:56:22 +0800 Subject: [PATCH] btrfs: fix a potential hole punching failure In commit d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole."), existing holes can be skipped by calling find_first_non_hole() to adjust start and len. However, if the given len is invalid and large, when an EXTENT_MAP_HOLE extent is found, len will not be set to zero because (em->start + em->len) is less than (start + len). Then the ret will be 1 but len will not be set to 0. The propagated non-zero ret will result in fallocate failure. In the while-loop of btrfs_replace_file_extents(), len is not updated every time before it calls find_first_non_hole(). That is, after btrfs_drop_extents() successfully drops the last non-hole file extent, it may fail with ENOSPC when attempting to drop a file extent item representing a hole. The problem can happen. After it calls find_first_non_hole(), the cur_offset will be adjusted to be larger than or equal to end. However, since the len is not set to zero, the break-loop condition (ret && !len) will not be met. After it leaves the while-loop, fallocate will return 1, which is an unexpected return value. We're not able to construct a reproducible way to let btrfs_drop_extents() fail with ENOSPC after it drops the last non-hole file extent but with remaining holes left. However, it's quite easy to fix. We just need to update and check the len every time before we call find_first_non_hole(). To make the while loop more readable, we also pull the variable updates to the bottom of loop like this: while (cur_offset < end) { ... // update cur_offset & len // advance cur_offset & len in hole-punching case if needed } Reported-by: Robbie Ko <robbieko(a)synology.com> Fixes: d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole.") CC: stable(a)vger.kernel.org # 4.4+ Reviewed-by: Robbie Ko <robbieko(a)synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng(a)synology.com> Reviewed-by: Filipe Manana <fdmanana(a)suse.com> Signed-off-by: BingJing Chang <bingjingc(a)synology.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 42634658815f..864c08d08a35 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2730,8 +2730,6 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, extent_info->file_offset += replace_len; } - cur_offset = drop_args.drop_end; - ret = btrfs_update_inode(trans, root, inode); if (ret) break; @@ -2751,7 +2749,9 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, BUG_ON(ret); /* shouldn't happen */ trans->block_rsv = rsv; - if (!extent_info) { + cur_offset = drop_args.drop_end; + len = end - cur_offset; + if (!extent_info && len) { ret = find_first_non_hole(inode, &cur_offset, &len); if (unlikely(ret < 0)) break;

3 years, 10 months

1
0
0 0

FAILED: patch "[PATCH] btrfs: fix a potential hole punching failure" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 3227788cd369d734d2d3cd94f8af7536b60fa552 Mon Sep 17 00:00:00 2001 From: BingJing Chang <bingjingc(a)synology.com> Date: Thu, 25 Mar 2021 09:56:22 +0800 Subject: [PATCH] btrfs: fix a potential hole punching failure In commit d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole."), existing holes can be skipped by calling find_first_non_hole() to adjust start and len. However, if the given len is invalid and large, when an EXTENT_MAP_HOLE extent is found, len will not be set to zero because (em->start + em->len) is less than (start + len). Then the ret will be 1 but len will not be set to 0. The propagated non-zero ret will result in fallocate failure. In the while-loop of btrfs_replace_file_extents(), len is not updated every time before it calls find_first_non_hole(). That is, after btrfs_drop_extents() successfully drops the last non-hole file extent, it may fail with ENOSPC when attempting to drop a file extent item representing a hole. The problem can happen. After it calls find_first_non_hole(), the cur_offset will be adjusted to be larger than or equal to end. However, since the len is not set to zero, the break-loop condition (ret && !len) will not be met. After it leaves the while-loop, fallocate will return 1, which is an unexpected return value. We're not able to construct a reproducible way to let btrfs_drop_extents() fail with ENOSPC after it drops the last non-hole file extent but with remaining holes left. However, it's quite easy to fix. We just need to update and check the len every time before we call find_first_non_hole(). To make the while loop more readable, we also pull the variable updates to the bottom of loop like this: while (cur_offset < end) { ... // update cur_offset & len // advance cur_offset & len in hole-punching case if needed } Reported-by: Robbie Ko <robbieko(a)synology.com> Fixes: d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole.") CC: stable(a)vger.kernel.org # 4.4+ Reviewed-by: Robbie Ko <robbieko(a)synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng(a)synology.com> Reviewed-by: Filipe Manana <fdmanana(a)suse.com> Signed-off-by: BingJing Chang <bingjingc(a)synology.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 42634658815f..864c08d08a35 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2730,8 +2730,6 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, extent_info->file_offset += replace_len; } - cur_offset = drop_args.drop_end; - ret = btrfs_update_inode(trans, root, inode); if (ret) break; @@ -2751,7 +2749,9 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, BUG_ON(ret); /* shouldn't happen */ trans->block_rsv = rsv; - if (!extent_info) { + cur_offset = drop_args.drop_end; + len = end - cur_offset; + if (!extent_info && len) { ret = find_first_non_hole(inode, &cur_offset, &len); if (unlikely(ret < 0)) break;

3 years, 10 months

1
0
0 0

FAILED: patch "[PATCH] btrfs: fix a potential hole punching failure" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 3227788cd369d734d2d3cd94f8af7536b60fa552 Mon Sep 17 00:00:00 2001 From: BingJing Chang <bingjingc(a)synology.com> Date: Thu, 25 Mar 2021 09:56:22 +0800 Subject: [PATCH] btrfs: fix a potential hole punching failure In commit d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole."), existing holes can be skipped by calling find_first_non_hole() to adjust start and len. However, if the given len is invalid and large, when an EXTENT_MAP_HOLE extent is found, len will not be set to zero because (em->start + em->len) is less than (start + len). Then the ret will be 1 but len will not be set to 0. The propagated non-zero ret will result in fallocate failure. In the while-loop of btrfs_replace_file_extents(), len is not updated every time before it calls find_first_non_hole(). That is, after btrfs_drop_extents() successfully drops the last non-hole file extent, it may fail with ENOSPC when attempting to drop a file extent item representing a hole. The problem can happen. After it calls find_first_non_hole(), the cur_offset will be adjusted to be larger than or equal to end. However, since the len is not set to zero, the break-loop condition (ret && !len) will not be met. After it leaves the while-loop, fallocate will return 1, which is an unexpected return value. We're not able to construct a reproducible way to let btrfs_drop_extents() fail with ENOSPC after it drops the last non-hole file extent but with remaining holes left. However, it's quite easy to fix. We just need to update and check the len every time before we call find_first_non_hole(). To make the while loop more readable, we also pull the variable updates to the bottom of loop like this: while (cur_offset < end) { ... // update cur_offset & len // advance cur_offset & len in hole-punching case if needed } Reported-by: Robbie Ko <robbieko(a)synology.com> Fixes: d77815461f04 ("btrfs: Avoid trucating page or punching hole in a already existed hole.") CC: stable(a)vger.kernel.org # 4.4+ Reviewed-by: Robbie Ko <robbieko(a)synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng(a)synology.com> Reviewed-by: Filipe Manana <fdmanana(a)suse.com> Signed-off-by: BingJing Chang <bingjingc(a)synology.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 42634658815f..864c08d08a35 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2730,8 +2730,6 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, extent_info->file_offset += replace_len; } - cur_offset = drop_args.drop_end; - ret = btrfs_update_inode(trans, root, inode); if (ret) break; @@ -2751,7 +2749,9 @@ int btrfs_replace_file_extents(struct btrfs_inode *inode, BUG_ON(ret); /* shouldn't happen */ trans->block_rsv = rsv; - if (!extent_info) { + cur_offset = drop_args.drop_end; + len = end - cur_offset; + if (!extent_info && len) { ret = find_first_non_hole(inode, &cur_offset, &len); if (unlikely(ret < 0)) break;

3 years, 10 months

1
0
0 0

stable-rc/queue/5.11 baseline: 106 runs, 1 regressions (v5.11.18-30-g80983e09d98ce)

by kernelci.org bot

stable-rc/queue/5.11 baseline: 106 runs, 1 regressions (v5.11.18-30-g80983e09d98ce) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------+-------+---------+----------+-----------+------------ imx8mp-evk | arm64 | lab-nxp | gcc-8 | defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/queue%2F5.11/kernel/v5.11.18… Test: baseline Tree: stable-rc Branch: queue/5.11 Describe: v5.11.18-30-g80983e09d98ce URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: 80983e09d98cead100040800371966922c1c5a93 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------+-------+---------+----------+-----------+------------ imx8mp-evk | arm64 | lab-nxp | gcc-8 | defconfig | 1 Details: https://kernelci.org/test/plan/id/60952c34d554b83af16f5482 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig Compiler: gcc-8 (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable-rc/queue-5.11/v5.11.18-30-g80983e09d98… HTML log: https://storage.kernelci.org//stable-rc/queue-5.11/v5.11.18-30-g80983e09d98… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.login: https://kernelci.org/test/case/id/60952c34d554b83af16f5483 failing since 0 day (last pass: v5.11.18-29-g6c2ae64a2a728, first fail: v5.11.18-30-g4232ce7a02cc)

3 years, 10 months

1
0
0 0

FAILED: patch "[PATCH] btrfs: fix metadata extent leak after failure to create" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 67addf29004c5be9fa0383c82a364bb59afc7f84 Mon Sep 17 00:00:00 2001 From: Filipe Manana <fdmanana(a)suse.com> Date: Tue, 20 Apr 2021 10:55:12 +0100 Subject: [PATCH] btrfs: fix metadata extent leak after failure to create subvolume When creating a subvolume we allocate an extent buffer for its root node after starting a transaction. We setup a root item for the subvolume that points to that extent buffer and then attempt to insert the root item into the root tree - however if that fails, due to ENOMEM for example, we do not free the extent buffer previously allocated and we do not abort the transaction (as at that point we did nothing that can not be undone). This means that we effectively do not return the metadata extent back to the free space cache/tree and we leave a delayed reference for it which causes a metadata extent item to be added to the extent tree, in the next transaction commit, without having backreferences. When this happens 'btrfs check' reports the following: $ btrfs check /dev/sdi Opening filesystem to check... Checking filesystem on /dev/sdi UUID: dce2cb9d-025f-4b05-a4bf-cee0ad3785eb [1/7] checking root items [2/7] checking extents ref mismatch on [30425088 16384] extent item 1, found 0 backref 30425088 root 256 not referenced back 0x564a91c23d70 incorrect global backref count on 30425088 found 1 wanted 0 backpointer mismatch on [30425088 16384] owner ref check failed [30425088 16384] ERROR: errors found in extent allocation tree or chunk allocation [3/7] checking free space cache [4/7] checking fs roots [5/7] checking only csums items (without verifying data) [6/7] checking root refs [7/7] checking quota groups skipped (not enabled on this FS) found 212992 bytes used, error(s) found total csum bytes: 0 total tree bytes: 131072 total fs tree bytes: 32768 total extent tree bytes: 16384 btree space waste bytes: 124669 file data blocks allocated: 65536 referenced 65536 So fix this by freeing the metadata extent if btrfs_insert_root() returns an error. CC: stable(a)vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 37c92a9fa2e3..b1328f17607e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -697,8 +697,6 @@ static noinline int create_subvol(struct inode *dir, btrfs_set_root_otransid(root_item, trans->transid); btrfs_tree_unlock(leaf); - free_extent_buffer(leaf); - leaf = NULL; btrfs_set_root_dirid(root_item, BTRFS_FIRST_FREE_OBJECTID); @@ -707,8 +705,22 @@ static noinline int create_subvol(struct inode *dir, key.type = BTRFS_ROOT_ITEM_KEY; ret = btrfs_insert_root(trans, fs_info->tree_root, &key, root_item); - if (ret) + if (ret) { + /* + * Since we don't abort the transaction in this case, free the + * tree block so that we don't leak space and leave the + * filesystem in an inconsistent state (an extent item in the + * extent tree without backreferences). Also no need to have + * the tree block locked since it is not in any tree at this + * point, so no other task can find it and use it. + */ + btrfs_free_tree_block(trans, root, leaf, 0, 1); + free_extent_buffer(leaf); goto fail; + } + + free_extent_buffer(leaf); + leaf = NULL; key.offset = (u64)-1; new_root = btrfs_get_new_fs_root(fs_info, objectid, anon_dev);

3 years, 10 months

1
0
0 0

FAILED: patch "[PATCH] erofs: add unsupported inode i_format check" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 24a806d849c0b0c1d0cd6a6b93ba4ae4c0ec9f08 Mon Sep 17 00:00:00 2001 From: Gao Xiang <hsiangkao(a)redhat.com> Date: Mon, 29 Mar 2021 08:36:14 +0800 Subject: [PATCH] erofs: add unsupported inode i_format check If any unknown i_format fields are set (may be of some new incompat inode features), mark such inode as unsupported. Just in case of any new incompat i_format fields added in the future. Link: https://lore.kernel.org/r/20210329003614.6583-1-hsiangkao@aol.com Fixes: 431339ba9042 ("staging: erofs: add inode operations") Cc: <stable(a)vger.kernel.org> # 4.19+ Signed-off-by: Gao Xiang <hsiangkao(a)redhat.com> diff --git a/fs/erofs/erofs_fs.h b/fs/erofs/erofs_fs.h index 9ad1615f4474..e8d04d808fa6 100644 --- a/fs/erofs/erofs_fs.h +++ b/fs/erofs/erofs_fs.h @@ -75,6 +75,9 @@ static inline bool erofs_inode_is_data_compressed(unsigned int datamode) #define EROFS_I_VERSION_BIT 0 #define EROFS_I_DATALAYOUT_BIT 1 +#define EROFS_I_ALL \ + ((1 << (EROFS_I_DATALAYOUT_BIT + EROFS_I_DATALAYOUT_BITS)) - 1) + /* 32-byte reduced form of an ondisk inode */ struct erofs_inode_compact { __le16 i_format; /* inode format hints */ diff --git a/fs/erofs/inode.c b/fs/erofs/inode.c index 119fdce1b520..7ed2d7391692 100644 --- a/fs/erofs/inode.c +++ b/fs/erofs/inode.c @@ -44,6 +44,13 @@ static struct page *erofs_read_inode(struct inode *inode, dic = page_address(page) + *ofs; ifmt = le16_to_cpu(dic->i_format); + if (ifmt & ~EROFS_I_ALL) { + erofs_err(inode->i_sb, "unsupported i_format %u of nid %llu", + ifmt, vi->nid); + err = -EOPNOTSUPP; + goto err_out; + } + vi->datalayout = erofs_inode_datalayout(ifmt); if (vi->datalayout >= EROFS_INODE_DATALAYOUT_MAX) { erofs_err(inode->i_sb, "unsupported datalayout %u of nid %llu",

3 years, 10 months

3
2
0 0

stable/linux-4.19.y baseline: 102 runs, 5 regressions (v4.19.190)

by kernelci.org bot

stable/linux-4.19.y baseline: 102 runs, 5 regressions (v4.19.190) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-8 | omap2plus_defconfig | 1 qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1 qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1 qemu_arm-versatilepb | arm | lab-collabora | gcc-8 | versatile_defconfig | 1 qemu_arm-versatilepb | arm | lab-linaro-lkft | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/job/stable/branch/linux-4.19.y/kernel/v4.19.190/p… Test: baseline Tree: stable Branch: linux-4.19.y Describe: v4.19.190 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git SHA: 3c8c23092588a23bf1856a64f58c37f477a413be Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-8 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/6095252141986a38d16f5479 Results: 4 PASS, 1 FAIL, 0 SKIP Full config: omap2plus_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/omap2plus_d… HTML log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/omap2plus_d… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/6095252141986a38d16f547e new failure (last pass: v4.19.189) 2 lines 2021-05-07 11:31:40.211000+00:00 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/108 2021-05-07 11:31:40.220000+00:00 kern :emerg : lock: emif_lock+0x0/0xffffed34 [emif], .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/609524ae03463ab86c6f547c Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… HTML log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.login: https://kernelci.org/test/case/id/609524ae03463ab86c6f547d failing since 169 days (last pass: v4.19.157, first fail: v4.19.158) platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/609524a92df44d785d6f5480 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… HTML log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.login: https://kernelci.org/test/case/id/609524a92df44d785d6f5481 failing since 169 days (last pass: v4.19.157, first fail: v4.19.158) platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-collabora | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/6095423a36a2e21b2a6f5486 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… HTML log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.login: https://kernelci.org/test/case/id/6095423a36a2e21b2a6f5487 failing since 169 days (last pass: v4.19.157, first fail: v4.19.158) platform | arch | lab | compiler | defconfig | regressions ---------------------+------+-----------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-linaro-lkft | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/6095255fdc72f2fe666f547e Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… HTML log: https://storage.kernelci.org//stable/linux-4.19.y/v4.19.190/arm/versatile_d… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-5-g2f114cc7… * baseline.login: https://kernelci.org/test/case/id/6095255fdc72f2fe666f547f failing since 169 days (last pass: v4.19.157, first fail: v4.19.158)

3 years, 10 months

1
0
0 0

[PATCH v4 02/12] drm/vc4: crtc: Skip the TXP

by Maxime Ripard

The vc4_set_crtc_possible_masks is meant to run over all the encoders and then set their possible_crtcs mask to their associated pixelvalve. However, since the commit 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own"), the TXP has been turned to a CRTC and encoder of its own, and while it does indeed register an encoder, it no longer has an associated pixelvalve. The code will thus run over the TXP encoder and set a bogus possible_crtcs mask, overriding the one set in the TXP bind function. In order to fix this, let's skip any virtual encoder. Cc: <stable(a)vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- drivers/gpu/drm/vc4/vc4_crtc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 269390bc586e..f1f2e8cbce79 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -1018,6 +1018,9 @@ static void vc4_set_crtc_possible_masks(struct drm_device *drm, struct vc4_encoder *vc4_encoder; int i; + if (encoder->encoder_type == DRM_MODE_ENCODER_VIRTUAL) + continue; + vc4_encoder = to_vc4_encoder(encoder); for (i = 0; i < ARRAY_SIZE(pv_data->encoder_types); i++) { if (vc4_encoder->type == encoder_types[i]) { -- 2.31.1

3 years, 10 months

1
0
0 0

[PATCH v4 01/12] drm/vc4: txp: Properly set the possible_crtcs mask

by Maxime Ripard

The current code does a binary OR on the possible_crtcs variable of the TXP encoder, while we want to set it to that value instead. Cc: <stable(a)vger.kernel.org> # v5.9+ Fixes: 39fcb2808376 ("drm/vc4: txp: Turn the TXP into a CRTC of its own") Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- drivers/gpu/drm/vc4/vc4_txp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c index c0122d83b651..2fc7f4b5fa09 100644 --- a/drivers/gpu/drm/vc4/vc4_txp.c +++ b/drivers/gpu/drm/vc4/vc4_txp.c @@ -507,7 +507,7 @@ static int vc4_txp_bind(struct device *dev, struct device *master, void *data) return ret; encoder = &txp->connector.encoder; - encoder->possible_crtcs |= drm_crtc_mask(crtc); + encoder->possible_crtcs = drm_crtc_mask(crtc); ret = devm_request_irq(dev, irq, vc4_txp_interrupt, 0, dev_name(dev), txp); -- 2.31.1

3 years, 10 months

1
0
0 0

stable-rc/queue/4.14 build: 192 builds: 0 failed, 192 passed, 63 warnings (v4.14.232-25-ga403778884a5)

by kernelci.org bot

stable-rc/queue/4.14 build: 192 builds: 0 failed, 192 passed, 63 warnings (v4.14.232-25-ga403778884a5) Full Build Summary: https://kernelci.org/build/stable-rc/branch/queue%2F4.14/kernel/v4.14.232-2… Tree: stable-rc Branch: queue/4.14 Git Describe: v4.14.232-25-ga403778884a5 Git Commit: a403778884a5c99ce0441d9381c4e415276a833f Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Built: 6 unique architectures Warnings Detected: arc: allnoconfig (gcc-8): 1 warning axs103_defconfig (gcc-8): 1 warning axs103_smp_defconfig (gcc-8): 1 warning haps_hs_defconfig (gcc-8): 1 warning haps_hs_smp_defconfig (gcc-8): 1 warning hsdk_defconfig (gcc-8): 1 warning nsim_hs_defconfig (gcc-8): 1 warning nsim_hs_smp_defconfig (gcc-8): 1 warning nsimosci_hs_defconfig (gcc-8): 1 warning nsimosci_hs_smp_defconfig (gcc-8): 1 warning tinyconfig (gcc-8): 1 warning vdk_hs38_defconfig (gcc-8): 1 warning vdk_hs38_smp_defconfig (gcc-8): 1 warning arm64: arm: am200epdkit_defconfig (gcc-8): 1 warning cm_x2xx_defconfig (gcc-8): 1 warning colibri_pxa300_defconfig (gcc-8): 1 warning corgi_defconfig (gcc-8): 1 warning efm32_defconfig (gcc-8): 1 warning eseries_pxa_defconfig (gcc-8): 1 warning h5000_defconfig (gcc-8): 1 warning integrator_defconfig (gcc-8): 1 warning lpc32xx_defconfig (gcc-8): 1 warning lpd270_defconfig (gcc-8): 1 warning lubbock_defconfig (gcc-8): 1 warning magician_defconfig (gcc-8): 1 warning mainstone_defconfig (gcc-8): 1 warning multi_v4t_defconfig (gcc-8): 1 warning palmz72_defconfig (gcc-8): 1 warning pcm027_defconfig (gcc-8): 1 warning prima2_defconfig (gcc-8): 1 warning pxa168_defconfig (gcc-8): 1 warning pxa255-idp_defconfig (gcc-8): 1 warning pxa3xx_defconfig (gcc-8): 1 warning pxa910_defconfig (gcc-8): 1 warning raumfeld_defconfig (gcc-8): 1 warning s3c2410_defconfig (gcc-8): 1 warning s3c6400_defconfig (gcc-8): 1 warning s5pv210_defconfig (gcc-8): 1 warning spitz_defconfig (gcc-8): 1 warning stm32_defconfig (gcc-8): 1 warning tango4_defconfig (gcc-8): 1 warning tct_hammer_defconfig (gcc-8): 1 warning versatile_defconfig (gcc-8): 1 warning viper_defconfig (gcc-8): 1 warning vt8500_v6_v7_defconfig (gcc-8): 1 warning xcep_defconfig (gcc-8): 1 warning zeus_defconfig (gcc-8): 1 warning i386: mips: db1xxx_defconfig (gcc-8): 1 warning jmr3927_defconfig (gcc-8): 1 warning malta_defconfig (gcc-8): 1 warning malta_kvm_guest_defconfig (gcc-8): 1 warning malta_qemu_32r6_defconfig (gcc-8): 2 warnings maltaaprp_defconfig (gcc-8): 1 warning maltasmvp_defconfig (gcc-8): 1 warning maltasmvp_eva_defconfig (gcc-8): 1 warning maltaup_defconfig (gcc-8): 1 warning maltaup_xpa_defconfig (gcc-8): 1 warning pic32mzda_defconfig (gcc-8): 1 warning xilfpga_defconfig (gcc-8): 1 warning x86_64: allnoconfig (gcc-8): 1 warning tinyconfig (gcc-8): 1 warning x86_64_defconfig (gcc-8): 1 warning Warnings summary: 59 drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] 3 Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' 1 {standard input}:29: Warning: macro instruction expanded into multiple instructions ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- 32r2el_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- allnoconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- allnoconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- ar7_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ath25_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ath79_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axs103_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- axs103_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- badge4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm47xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm63xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bigsur_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bmips_be_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bmips_stb_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- capcella_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cavium_octeon_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cerfcube_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ci20_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- cm_x300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cobalt_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- collie_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- davinci_all_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- db1xxx_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- decstation_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- dove_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- e55_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- em_x270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ep93xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- exynos_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ezx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- footbridge_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- fuloong2e_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- gemini_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- gpr_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- hackkit_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- haps_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- haps_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- hisi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hsdk_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- i386_defconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- integrator_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- iop13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop32x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop33x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ip22_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ip32_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- jazz_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- jmr3927_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- jornada720_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lasat_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lemote2f_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson1b_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson1c_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson3_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- lpd270_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- lubbock_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- magician_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- mainstone_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_kvm_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- malta_kvm_guest_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_qemu_32r6_defconfig (mips, gcc-8) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: {standard input}:29: Warning: macro instruction expanded into multiple instructions drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaaprp_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltasmvp_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltasmvp_eva_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaup_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaup_xpa_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- markeins_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mips_paravirt_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mmp2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- moxart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mpc30x_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mps2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- msp71xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mtx1_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v4t_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- multi_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mxs_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- neponset_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nlm_xlp_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nlm_xlr_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nsim_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsim_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsimosci_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsimosci_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nuc910_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap2plus_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omega2p_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- orion5x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pcm027_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pic32mzda_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pistachio_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pnx8335_stb225_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa168_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa910_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- qcom_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- qi_lb60_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- raumfeld_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- rb532_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rbtx49xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- realview_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rm200_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rt305x_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- s3c6400_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- s5pv210_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- sama5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sb1250_swarm_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shannon_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- stm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- sunxi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tango4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tb0219_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tb0226_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tb0287_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tct_hammer_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tegra_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tinyconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- tinyconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tinyconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tinyconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- trizeps4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u8500_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vdk_hs38_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vdk_hs38_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- versatile_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vexpress_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vocore2_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- workpad_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- xcep_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- xilfpga_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- zeus_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- zx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2021