August 2021 - Linux-stable-mirror

[PATCH net v2] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases

by Grygorii Strashko

The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net: ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW packed drop issue when packets are sent from Host to the port with PVID and un-tagging enabled. Unfortunately this breaks some other non-switch specific use-cases, like: - [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the packet - [2] Some industrial protocols, which expects min TX packet size 60Bytes (excluding FCS). Fix it by configuring min TX packet size depending on driver mode - 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode - 64Bytes (VLAN_ETH_ZLEN) for switch mode and update it during driver mode change and annotate with READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing. [1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/ [2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669 Cc: stable(a)vger.kernel.org Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Reported-by: Ben Hutchings <ben.hutchings(a)essensium.com> Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> --- Changes in v2: - use skb_put_padto - update description - annotate tx_packet_min with READ_ONCE()/WRITE_ONCE() I'm not going to add additional changes in cpdma configuration interface and, instead, will send patches to convert all cpdma users to use skb_put_padto() and drop frames padding from cpdma. v1: https://patchwork.kernel.org/project/netdevbpf/patch/20210611132732.10690-1… drivers/net/ethernet/ti/cpsw_new.c | 7 +++++-- drivers/net/ethernet/ti/cpsw_priv.h | 4 +++- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c index ae167223e87f..d904f4ca4b37 100644 --- a/drivers/net/ethernet/ti/cpsw_new.c +++ b/drivers/net/ethernet/ti/cpsw_new.c @@ -921,7 +921,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, struct cpdma_chan *txch; int ret, q_idx; - if (skb_padto(skb, CPSW_MIN_PACKET_SIZE)) { + if (skb_put_padto(skb, READ_ONCE(priv->tx_packet_min))) { cpsw_err(priv, tx_err, "packet pad failed\n"); ndev->stats.tx_dropped++; return NET_XMIT_DROP; @@ -1101,7 +1101,7 @@ static int cpsw_ndo_xdp_xmit(struct net_device *ndev, int n, for (i = 0; i < n; i++) { xdpf = frames[i]; - if (xdpf->len < CPSW_MIN_PACKET_SIZE) + if (xdpf->len < READ_ONCE(priv->tx_packet_min)) break; if (cpsw_xdp_tx_frame(priv, xdpf, NULL, priv->emac_port)) @@ -1390,6 +1390,7 @@ static int cpsw_create_ports(struct cpsw_common *cpsw) priv->dev = dev; priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG); priv->emac_port = i + 1; + priv->tx_packet_min = CPSW_MIN_PACKET_SIZE; if (is_valid_ether_addr(slave_data->mac_addr)) { ether_addr_copy(priv->mac_addr, slave_data->mac_addr); @@ -1698,6 +1699,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id, priv = netdev_priv(sl_ndev); slave->port_vlan = vlan; + WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE_VLAN); if (netif_running(sl_ndev)) cpsw_port_add_switch_def_ale_entries(priv, slave); @@ -1726,6 +1728,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id, priv = netdev_priv(slave->ndev); slave->port_vlan = slave->data->dual_emac_res_vlan; + WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE); cpsw_port_add_dual_emac_def_ale_entries(priv, slave); } diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h index a323bea54faa..2951fb7b9dae 100644 --- a/drivers/net/ethernet/ti/cpsw_priv.h +++ b/drivers/net/ethernet/ti/cpsw_priv.h @@ -89,7 +89,8 @@ do { \ #define CPSW_POLL_WEIGHT 64 #define CPSW_RX_VLAN_ENCAP_HDR_SIZE 4 -#define CPSW_MIN_PACKET_SIZE (VLAN_ETH_ZLEN) +#define CPSW_MIN_PACKET_SIZE_VLAN (VLAN_ETH_ZLEN) +#define CPSW_MIN_PACKET_SIZE (ETH_ZLEN) #define CPSW_MAX_PACKET_SIZE (VLAN_ETH_FRAME_LEN +\ ETH_FCS_LEN +\ CPSW_RX_VLAN_ENCAP_HDR_SIZE) @@ -380,6 +381,7 @@ struct cpsw_priv { u32 emac_port; struct cpsw_common *cpsw; int offload_fwd_mark; + u32 tx_packet_min; }; #define ndev_to_cpsw(ndev) (((struct cpsw_priv *)netdev_priv(ndev))->cpsw) -- 2.17.1

3 years, 6 months

2
2
0 0

FAILED: patch "[PATCH] tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 376e4199e327a5cf29b8ec8fb0f64f3d8b429819 Mon Sep 17 00:00:00 2001 From: Sumit Garg <sumit.garg(a)linaro.org> Date: Mon, 14 Jun 2021 17:33:15 -0500 Subject: [PATCH] tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag Currently TEE_SHM_DMA_BUF flag has been inappropriately used to not register shared memory allocated for private usage by underlying TEE driver: OP-TEE in this case. So rather add a new flag as TEE_SHM_PRIV that can be utilized by underlying TEE drivers for private allocation and usage of shared memory. With this corrected, allow tee_shm_alloc_kernel_buf() to allocate a shared memory region without the backing of dma-buf. Cc: stable(a)vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg(a)linaro.org> Co-developed-by: Tyler Hicks <tyhicks(a)linux.microsoft.com> Signed-off-by: Tyler Hicks <tyhicks(a)linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander(a)linaro.org> Reviewed-by: Sumit Garg <sumit.garg(a)linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c index 387e94768182..945f03da0223 100644 --- a/drivers/tee/optee/call.c +++ b/drivers/tee/optee/call.c @@ -184,7 +184,7 @@ static struct tee_shm *get_msg_arg(struct tee_context *ctx, size_t num_params, struct optee_msg_arg *ma; shm = tee_shm_alloc(ctx, OPTEE_MSG_GET_ARG_SIZE(num_params), - TEE_SHM_MAPPED); + TEE_SHM_MAPPED | TEE_SHM_PRIV); if (IS_ERR(shm)) return shm; diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 651d49b53d3b..5ce13b099d7d 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -278,7 +278,8 @@ static void optee_release(struct tee_context *ctx) if (!ctxdata) return; - shm = tee_shm_alloc(ctx, sizeof(struct optee_msg_arg), TEE_SHM_MAPPED); + shm = tee_shm_alloc(ctx, sizeof(struct optee_msg_arg), + TEE_SHM_MAPPED | TEE_SHM_PRIV); if (!IS_ERR(shm)) { arg = tee_shm_get_va(shm, 0); /* diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index 1849180b0278..efbaff7ad7e5 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -314,7 +314,7 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx, shm = cmd_alloc_suppl(ctx, sz); break; case OPTEE_RPC_SHM_TYPE_KERNEL: - shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED); + shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV); break; default: arg->ret = TEEC_ERROR_BAD_PARAMETERS; @@ -502,7 +502,8 @@ void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param, switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) { case OPTEE_SMC_RPC_FUNC_ALLOC: - shm = tee_shm_alloc(ctx, param->a1, TEE_SHM_MAPPED); + shm = tee_shm_alloc(ctx, param->a1, + TEE_SHM_MAPPED | TEE_SHM_PRIV); if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) { reg_pair_from_64(&param->a1, &param->a2, pa); reg_pair_from_64(&param->a4, &param->a5, diff --git a/drivers/tee/optee/shm_pool.c b/drivers/tee/optee/shm_pool.c index da06ce9b9313..c41a9a501a6e 100644 --- a/drivers/tee/optee/shm_pool.c +++ b/drivers/tee/optee/shm_pool.c @@ -27,7 +27,11 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, shm->paddr = page_to_phys(page); shm->size = PAGE_SIZE << order; - if (shm->flags & TEE_SHM_DMA_BUF) { + /* + * Shared memory private to the OP-TEE driver doesn't need + * to be registered with OP-TEE. + */ + if (!(shm->flags & TEE_SHM_PRIV)) { unsigned int nr_pages = 1 << order, i; struct page **pages; @@ -60,7 +64,7 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm, static void pool_op_free(struct tee_shm_pool_mgr *poolm, struct tee_shm *shm) { - if (shm->flags & TEE_SHM_DMA_BUF) + if (!(shm->flags & TEE_SHM_PRIV)) optee_shm_unregister(shm->ctx, shm); free_pages((unsigned long)shm->kaddr, get_order(shm->size)); diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index c65e44707cd6..8a9384a64f3e 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -117,7 +117,7 @@ struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags) return ERR_PTR(-EINVAL); } - if ((flags & ~(TEE_SHM_MAPPED | TEE_SHM_DMA_BUF))) { + if ((flags & ~(TEE_SHM_MAPPED | TEE_SHM_DMA_BUF | TEE_SHM_PRIV))) { dev_err(teedev->dev.parent, "invalid shm flags 0x%x", flags); return ERR_PTR(-EINVAL); } @@ -207,7 +207,7 @@ EXPORT_SYMBOL_GPL(tee_shm_alloc); */ struct tee_shm *tee_shm_alloc_kernel_buf(struct tee_context *ctx, size_t size) { - return tee_shm_alloc(ctx, size, TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); + return tee_shm_alloc(ctx, size, TEE_SHM_MAPPED); } EXPORT_SYMBOL_GPL(tee_shm_alloc_kernel_buf); diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h index 8990f7628387..3ebfea0781f1 100644 --- a/include/linux/tee_drv.h +++ b/include/linux/tee_drv.h @@ -27,6 +27,7 @@ #define TEE_SHM_USER_MAPPED BIT(4) /* Memory mapped in user space */ #define TEE_SHM_POOL BIT(5) /* Memory allocated from pool */ #define TEE_SHM_KERNEL_MAPPED BIT(6) /* Memory mapped in kernel space */ +#define TEE_SHM_PRIV BIT(7) /* Memory private to TEE driver */ struct device; struct tee_device;

3 years, 6 months

1
0
0 0

FAILED: patch "[PATCH] tracing/histogram: Rename "cpu" to "common_cpu"" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1e3bac71c5053c99d438771fc9fa5082ae5d90aa Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" <rostedt(a)goodmis.org> Date: Wed, 21 Jul 2021 11:00:53 -0400 Subject: [PATCH] tracing/histogram: Rename "cpu" to "common_cpu" Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on. The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events. For example, if I want to have a histogram on the count of the workqueue_queue_work event on its cpu field, running: ># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger Gives a misleading and wrong result. Change the command to "common_cpu" as no event should have "common_*" fields as that's a reserved name for fields used by all events. And this makes sense here as common_cpu would be a field used by all events. Now we can even do: ># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger ># cat events/workqueue/workqueue_queue_work/hist # event histogram # # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active] # { common_cpu: 0, cpu: 2 } hitcount: 1 { common_cpu: 0, cpu: 4 } hitcount: 1 { common_cpu: 7, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 1 } hitcount: 1 { common_cpu: 0, cpu: 6 } hitcount: 2 { common_cpu: 0, cpu: 5 } hitcount: 2 { common_cpu: 1, cpu: 1 } hitcount: 4 { common_cpu: 6, cpu: 6 } hitcount: 4 { common_cpu: 5, cpu: 5 } hitcount: 14 { common_cpu: 4, cpu: 4 } hitcount: 26 { common_cpu: 0, cpu: 0 } hitcount: 39 { common_cpu: 2, cpu: 2 } hitcount: 184 Now for backward compatibility, I added a trick. If "cpu" is used, and the field is not found, it will fall back to "common_cpu" and work as it did before. This way, it will still work for old programs that use "cpu" to get the actual CPU, but if the event has a "cpu" as a field, it will get that event's "cpu" field, which is probably what it wants anyway. I updated the tracefs/README to include documentation about both the common_timestamp and the common_cpu. This way, if that text is present in the README, then an application can know that common_cpu is supported over just plain "cpu". Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Ingo Molnar <mingo(a)kernel.org> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: stable(a)vger.kernel.org Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers") Reviewed-by: Tom Zanussi <zanussi(a)kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat(a)kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index b71e09f745c3..f99be8062bc8 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -191,7 +191,7 @@ Documentation written by Tom Zanussi with the event, in nanoseconds. May be modified by .usecs to have timestamps interpreted as microseconds. - cpu int the cpu on which the event occurred. + common_cpu int the cpu on which the event occurred. ====================== ==== ======================================= Extended error information diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f8b80b5bab71..c59dd35a6da5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5609,6 +5609,10 @@ static const char readme_msg[] = "\t [:name=histname1]\n" "\t [:<handler>.<action>]\n" "\t [if <filter>]\n\n" + "\t Note, special fields can be used as well:\n" + "\t common_timestamp - to record current timestamp\n" + "\t common_cpu - to record the CPU the event happened on\n" + "\n" "\t When a matching event is hit, an entry is added to a hash\n" "\t table using the key(s) and value(s) named, and the value of a\n" "\t sum called 'hitcount' is incremented. Keys and values\n" diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index 16a9dfc9fffc..34325f41ebc0 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -1111,7 +1111,7 @@ static const char *hist_field_name(struct hist_field *field, field->flags & HIST_FIELD_FL_ALIAS) field_name = hist_field_name(field->operands[0], ++level); else if (field->flags & HIST_FIELD_FL_CPU) - field_name = "cpu"; + field_name = "common_cpu"; else if (field->flags & HIST_FIELD_FL_EXPR || field->flags & HIST_FIELD_FL_VAR_REF) { if (field->system) { @@ -1991,14 +1991,24 @@ parse_field(struct hist_trigger_data *hist_data, struct trace_event_file *file, hist_data->enable_timestamps = true; if (*flags & HIST_FIELD_FL_TIMESTAMP_USECS) hist_data->attrs->ts_in_usecs = true; - } else if (strcmp(field_name, "cpu") == 0) + } else if (strcmp(field_name, "common_cpu") == 0) *flags |= HIST_FIELD_FL_CPU; else { field = trace_find_event_field(file->event_call, field_name); if (!field || !field->size) { - hist_err(tr, HIST_ERR_FIELD_NOT_FOUND, errpos(field_name)); - field = ERR_PTR(-EINVAL); - goto out; + /* + * For backward compatibility, if field_name + * was "cpu", then we treat this the same as + * common_cpu. + */ + if (strcmp(field_name, "cpu") == 0) { + *flags |= HIST_FIELD_FL_CPU; + } else { + hist_err(tr, HIST_ERR_FIELD_NOT_FOUND, + errpos(field_name)); + field = ERR_PTR(-EINVAL); + goto out; + } } } out: @@ -5085,7 +5095,7 @@ static void hist_field_print(struct seq_file *m, struct hist_field *hist_field) seq_printf(m, "%s=", hist_field->var.name); if (hist_field->flags & HIST_FIELD_FL_CPU) - seq_puts(m, "cpu"); + seq_puts(m, "common_cpu"); else if (field_name) { if (hist_field->flags & HIST_FIELD_FL_VAR_REF || hist_field->flags & HIST_FIELD_FL_ALIAS)

3 years, 6 months

3
2
0 0

FAILED: patch "[PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d25d85061bd856d6be221626605319154f9b5043 Mon Sep 17 00:00:00 2001 From: Wesley Cheng <wcheng(a)codeaurora.org> Date: Thu, 29 Jul 2021 00:33:14 -0700 Subject: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed from the cancelled_list using dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable routine is running in parallel (due to UDC unbind). As the cleanup routine removes n, and the pullup disable removes n+1, once the cleanup retakes the DWC3 lock, it references a request who was already removed/handled. With list debug enabled, this leads to a panic. Ensure all instances of the macro are replaced where gadget giveback is used. Example call stack: Thread#1: __dwc3_gadget_ep_set_halt() - CLEAR HALT -> dwc3_gadget_ep_cleanup_cancelled_requests() ->list_for_each_entry_safe() ->dwc3_gadget_giveback(n) ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list] ->spin_unlock ->Thread#2 executes ... ->dwc3_gadget_giveback(n+1) ->Already removed! Thread#2: dwc3_gadget_pullup() ->waiting for dwc3 spin_lock ... ->Thread#1 released lock ->dwc3_stop_active_transfers() ->dwc3_remove_requests() ->fetches n+1 item from cancelled_list (n removed by Thread#1) ->dwc3_gadget_giveback() ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list] ->spin_unlock Fix this condition by utilizing list_replace_init(), and traversing through a local copy of the current elements in the endpoint lists. This will also set the parent list as empty, so if another thread is also looping through the list, it will be empty on the next iteration. Fixes: d4f1afe5e896 ("usb: dwc3: gadget: move requests to cancelled_list") Cc: stable <stable(a)vger.kernel.org> Acked-by: Felipe Balbi <balbi(a)kernel.org> Signed-off-by: Wesley Cheng <wcheng(a)codeaurora.org> Link: https://lore.kernel.org/r/1627543994-20327-1-git-send-email-wcheng@codeauro… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 45f2bc0807e8..a1b262669574 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1741,9 +1741,13 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) { struct dwc3_request *req; struct dwc3_request *tmp; + struct list_head local; struct dwc3 *dwc = dep->dwc; - list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) { +restart: + list_replace_init(&dep->cancelled_list, &local); + + list_for_each_entry_safe(req, tmp, &local, list) { dwc3_gadget_ep_skip_trbs(dep, req); switch (req->status) { case DWC3_REQUEST_STATUS_DISCONNECTED: @@ -1761,6 +1765,9 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) break; } } + + if (!list_empty(&dep->cancelled_list)) + goto restart; } static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, @@ -2958,8 +2965,12 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, { struct dwc3_request *req; struct dwc3_request *tmp; + struct list_head local; - list_for_each_entry_safe(req, tmp, &dep->started_list, list) { +restart: + list_replace_init(&dep->started_list, &local); + + list_for_each_entry_safe(req, tmp, &local, list) { int ret; ret = dwc3_gadget_ep_cleanup_completed_request(dep, event, @@ -2967,6 +2978,9 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, if (ret) break; } + + if (!list_empty(&dep->started_list)) + goto restart; } static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep)

3 years, 6 months

1
0
0 0

FAILED: patch "[PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d25d85061bd856d6be221626605319154f9b5043 Mon Sep 17 00:00:00 2001 From: Wesley Cheng <wcheng(a)codeaurora.org> Date: Thu, 29 Jul 2021 00:33:14 -0700 Subject: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed from the cancelled_list using dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable routine is running in parallel (due to UDC unbind). As the cleanup routine removes n, and the pullup disable removes n+1, once the cleanup retakes the DWC3 lock, it references a request who was already removed/handled. With list debug enabled, this leads to a panic. Ensure all instances of the macro are replaced where gadget giveback is used. Example call stack: Thread#1: __dwc3_gadget_ep_set_halt() - CLEAR HALT -> dwc3_gadget_ep_cleanup_cancelled_requests() ->list_for_each_entry_safe() ->dwc3_gadget_giveback(n) ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list] ->spin_unlock ->Thread#2 executes ... ->dwc3_gadget_giveback(n+1) ->Already removed! Thread#2: dwc3_gadget_pullup() ->waiting for dwc3 spin_lock ... ->Thread#1 released lock ->dwc3_stop_active_transfers() ->dwc3_remove_requests() ->fetches n+1 item from cancelled_list (n removed by Thread#1) ->dwc3_gadget_giveback() ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list] ->spin_unlock Fix this condition by utilizing list_replace_init(), and traversing through a local copy of the current elements in the endpoint lists. This will also set the parent list as empty, so if another thread is also looping through the list, it will be empty on the next iteration. Fixes: d4f1afe5e896 ("usb: dwc3: gadget: move requests to cancelled_list") Cc: stable <stable(a)vger.kernel.org> Acked-by: Felipe Balbi <balbi(a)kernel.org> Signed-off-by: Wesley Cheng <wcheng(a)codeaurora.org> Link: https://lore.kernel.org/r/1627543994-20327-1-git-send-email-wcheng@codeauro… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 45f2bc0807e8..a1b262669574 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1741,9 +1741,13 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) { struct dwc3_request *req; struct dwc3_request *tmp; + struct list_head local; struct dwc3 *dwc = dep->dwc; - list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) { +restart: + list_replace_init(&dep->cancelled_list, &local); + + list_for_each_entry_safe(req, tmp, &local, list) { dwc3_gadget_ep_skip_trbs(dep, req); switch (req->status) { case DWC3_REQUEST_STATUS_DISCONNECTED: @@ -1761,6 +1765,9 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) break; } } + + if (!list_empty(&dep->cancelled_list)) + goto restart; } static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, @@ -2958,8 +2965,12 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, { struct dwc3_request *req; struct dwc3_request *tmp; + struct list_head local; - list_for_each_entry_safe(req, tmp, &dep->started_list, list) { +restart: + list_replace_init(&dep->started_list, &local); + + list_for_each_entry_safe(req, tmp, &local, list) { int ret; ret = dwc3_gadget_ep_cleanup_completed_request(dep, event, @@ -2967,6 +2978,9 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, if (ret) break; } + + if (!list_empty(&dep->started_list)) + goto restart; } static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep)

3 years, 6 months

1
0
0 0

FAILED: patch "[PATCH] firmware: tee_bnxt: Release TEE shm, session, and context" failed to apply to 5.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 914ab19e471d8fb535ed50dff108b0a615f3c2d8 Mon Sep 17 00:00:00 2001 From: Allen Pais <apais(a)linux.microsoft.com> Date: Mon, 14 Jun 2021 17:33:17 -0500 Subject: [PATCH] firmware: tee_bnxt: Release TEE shm, session, and context during kexec Implement a .shutdown hook that will be called during a kexec operation so that the TEE shared memory, session, and context that were set up during .probe can be properly freed/closed. Additionally, don't use dma-buf backed shared memory for the fw_shm_pool. dma-buf backed shared memory cannot be reliably freed and unregistered during a kexec operation even when tee_shm_free() is called on the shm from a .shutdown hook. The problem occurs because dma_buf_put() calls fput() which then uses task_work_add(), with the TWA_RESUME parameter, to queue tee_shm_release() to be called before the current task returns to user mode. However, the current task never returns to user mode before the kexec completes so the memory is never freed nor unregistered. Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory allocation so that tee_shm_free() can directly call tee_shm_release(). This will ensure that the shm can be freed and unregistered during a kexec operation. Fixes: 246880958ac9 ("firmware: broadcom: add OP-TEE based BNXT f/w manager") Cc: stable(a)vger.kernel.org Signed-off-by: Allen Pais <apais(a)linux.microsoft.com> Co-developed-by: Tyler Hicks <tyhicks(a)linux.microsoft.com> Signed-off-by: Tyler Hicks <tyhicks(a)linux.microsoft.com> Reviewed-by: Sumit Garg <sumit.garg(a)linaro.org> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c index ed10da5313e8..a5bf4c3f6dc7 100644 --- a/drivers/firmware/broadcom/tee_bnxt_fw.c +++ b/drivers/firmware/broadcom/tee_bnxt_fw.c @@ -212,10 +212,9 @@ static int tee_bnxt_fw_probe(struct device *dev) pvt_data.dev = dev; - fw_shm_pool = tee_shm_alloc(pvt_data.ctx, MAX_SHM_MEM_SZ, - TEE_SHM_MAPPED | TEE_SHM_DMA_BUF); + fw_shm_pool = tee_shm_alloc_kernel_buf(pvt_data.ctx, MAX_SHM_MEM_SZ); if (IS_ERR(fw_shm_pool)) { - dev_err(pvt_data.dev, "tee_shm_alloc failed\n"); + dev_err(pvt_data.dev, "tee_shm_alloc_kernel_buf failed\n"); err = PTR_ERR(fw_shm_pool); goto out_sess; } @@ -242,6 +241,14 @@ static int tee_bnxt_fw_remove(struct device *dev) return 0; } +static void tee_bnxt_fw_shutdown(struct device *dev) +{ + tee_shm_free(pvt_data.fw_shm_pool); + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); + tee_client_close_context(pvt_data.ctx); + pvt_data.ctx = NULL; +} + static const struct tee_client_device_id tee_bnxt_fw_id_table[] = { {UUID_INIT(0x6272636D, 0x2019, 0x0716, 0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)}, @@ -257,6 +264,7 @@ static struct tee_client_driver tee_bnxt_fw_driver = { .bus = &tee_bus_type, .probe = tee_bnxt_fw_probe, .remove = tee_bnxt_fw_remove, + .shutdown = tee_bnxt_fw_shutdown, }, };

3 years, 6 months

1
0
0 0

FAILED: patch "[PATCH] tty: serial: fsl_lpuart: fix the wrong return value in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 06e91df16f3e1ca1a1886968fb22d4258f3b6b6f Mon Sep 17 00:00:00 2001 From: Sherry Sun <sherry.sun(a)nxp.com> Date: Thu, 29 Jul 2021 16:31:09 +0800 Subject: [PATCH] tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl Patch e60c2991f18b make the lpuart32_get_mctrl always return 0, actually this will break the functions of device which use flow control such as Bluetooth. For lpuart32 plaform, the hardware can handle the CTS automatically. So we should set TIOCM_CTS active. Also need to set CAR and DSR active. Patch has been tested on lpuart32 platforms such as imx8qm and imx8ulp. Fixes: e60c2991f18b ("serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Sherry Sun <sherry.sun(a)nxp.com> Link: https://lore.kernel.org/r/20210729083109.31541-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 508128ddfa01..f0e5da77ed6d 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1415,7 +1415,7 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port) static unsigned int lpuart32_get_mctrl(struct uart_port *port) { - unsigned int mctrl = 0; + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; u32 reg; reg = lpuart32_read(port, UARTCTRL);

3 years, 6 months

1
0
0 0

FAILED: patch "[PATCH] tty: serial: fsl_lpuart: fix the wrong return value in" failed to apply to 5.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 06e91df16f3e1ca1a1886968fb22d4258f3b6b6f Mon Sep 17 00:00:00 2001 From: Sherry Sun <sherry.sun(a)nxp.com> Date: Thu, 29 Jul 2021 16:31:09 +0800 Subject: [PATCH] tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl Patch e60c2991f18b make the lpuart32_get_mctrl always return 0, actually this will break the functions of device which use flow control such as Bluetooth. For lpuart32 plaform, the hardware can handle the CTS automatically. So we should set TIOCM_CTS active. Also need to set CAR and DSR active. Patch has been tested on lpuart32 platforms such as imx8qm and imx8ulp. Fixes: e60c2991f18b ("serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Sherry Sun <sherry.sun(a)nxp.com> Link: https://lore.kernel.org/r/20210729083109.31541-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 508128ddfa01..f0e5da77ed6d 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1415,7 +1415,7 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port) static unsigned int lpuart32_get_mctrl(struct uart_port *port) { - unsigned int mctrl = 0; + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; u32 reg; reg = lpuart32_read(port, UARTCTRL);

3 years, 6 months

1
0
0 0

[RESEND PATCH 4/4] slimbus: ngd: reset dma setup during runtime pm

by Srinivas Kandagatla

During suspend/resume NGD remote instance is power cycled along with remotely controlled bam dma engine. So Reset the dma configuration during this suspend resume path so that we are not dealing with any stale dma setup. Without this transactions timeout after first suspend resume path. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/slimbus/qcom-ngd-ctrl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index f3ee8e036372..7040293c2ee8 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1080,7 +1080,8 @@ static void qcom_slim_ngd_setup(struct qcom_slim_ngd_ctrl *ctrl) { u32 cfg = readl_relaxed(ctrl->ngd->base); - if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN) + if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN || + ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP) qcom_slim_ngd_init_dma(ctrl); /* By default enable message queues */ @@ -1131,6 +1132,7 @@ static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl) dev_info(ctrl->dev, "Subsys restart: ADSP active framer\n"); return 0; } + qcom_slim_ngd_setup(ctrl); return 0; } @@ -1618,6 +1620,7 @@ static int __maybe_unused qcom_slim_ngd_runtime_suspend(struct device *dev) struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev); int ret = 0; + qcom_slim_ngd_exit_dma(ctrl); if (!ctrl->qmi.handle) return 0; -- 2.21.0

3 years, 6 months

1
0
0 0

[RESEND PATCH 3/4] slimbus: ngd: set correct device for pm

by Srinivas Kandagatla

For some reason we ended up using wrong device in some places for pm_runtime calls. Fix this so that NGG driver can do runtime pm correctly. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- drivers/slimbus/qcom-ngd-ctrl.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index c054e83ab636..f3ee8e036372 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -618,7 +618,7 @@ static void qcom_slim_ngd_rx(struct qcom_slim_ngd_ctrl *ctrl, u8 *buf) (mc == SLIM_USR_MC_GENERIC_ACK && mt == SLIM_MSG_MT_SRC_REFERRED_USER)) { slim_msg_response(&ctrl->ctrl, &buf[4], buf[3], len - 4); - pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_mark_last_busy(ctrl->ctrl.dev); } } @@ -1257,13 +1257,14 @@ static int qcom_slim_ngd_enable(struct qcom_slim_ngd_ctrl *ctrl, bool enable) } /* controller state should be in sync with framework state */ complete(&ctrl->qmi.qmi_comp); - if (!pm_runtime_enabled(ctrl->dev) || - !pm_runtime_suspended(ctrl->dev)) - qcom_slim_ngd_runtime_resume(ctrl->dev); + if (!pm_runtime_enabled(ctrl->ctrl.dev) || + !pm_runtime_suspended(ctrl->ctrl.dev)) + qcom_slim_ngd_runtime_resume(ctrl->ctrl.dev); else - pm_runtime_resume(ctrl->dev); - pm_runtime_mark_last_busy(ctrl->dev); - pm_runtime_put(ctrl->dev); + pm_runtime_resume(ctrl->ctrl.dev); + + pm_runtime_mark_last_busy(ctrl->ctrl.dev); + pm_runtime_put(ctrl->ctrl.dev); ret = slim_register_controller(&ctrl->ctrl); if (ret) { @@ -1389,7 +1390,7 @@ static int qcom_slim_ngd_ssr_pdr_notify(struct qcom_slim_ngd_ctrl *ctrl, /* Make sure the last dma xfer is finished */ mutex_lock(&ctrl->tx_lock); if (ctrl->state != QCOM_SLIM_NGD_CTRL_DOWN) { - pm_runtime_get_noresume(ctrl->dev); + pm_runtime_get_noresume(ctrl->ctrl.dev); ctrl->state = QCOM_SLIM_NGD_CTRL_DOWN; qcom_slim_ngd_down(ctrl); qcom_slim_ngd_exit_dma(ctrl); -- 2.21.0

3 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2021