Linux-stable-mirror September 2021

linux-stable-mirror@lists.linaro.org

284 participants
1630 discussions

FAILED: patch "[PATCH] Revert "btrfs: compression: don't try to compress if we don't" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 4e9655763b82a91e4c341835bb504a2b1590f984 Mon Sep 17 00:00:00 2001 From: Qu Wenruo <wqu(a)suse.com> Date: Wed, 25 Aug 2021 13:41:42 +0800 Subject: [PATCH] Revert "btrfs: compression: don't try to compress if we don't have enough pages" This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763. [BUG] It's no longer possible to create compressed inline extent after commit f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages"). [CAUSE] For compression code, there are several possible reasons we have a range that needs to be compressed while it's no more than one page. - Compressed inline write The data is always smaller than one sector and the test lacks the condition to properly recognize a non-inline extent. - Compressed subpage write For the incoming subpage compressed write support, we require page alignment of the delalloc range. And for 64K page size, we can compress just one page into smaller sectors. For those reasons, the requirement for the data to be more than one page is not correct, and is already causing regression for compressed inline data writeback. The idea of skipping one page to avoid wasting CPU time could be revisited in the future. [FIX] Fix it by reverting the offending commit. Reported-by: Zygo Blaxell <ce3g8jdj(a)umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.n… Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages") CC: stable(a)vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 06f9f167222b..bd5689fa290e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -629,7 +629,7 @@ static noinline int compress_file_range(struct async_chunk *async_chunk) * inode has not been flagged as nocompress. This flag can * change at any time if we discover bad compression ratios. */ - if (nr_pages > 1 && inode_need_compress(BTRFS_I(inode), start, end)) { + if (inode_need_compress(BTRFS_I(inode), start, end)) { WARN_ON(pages); pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS); if (!pages) {

3 years, 8 months

[PATCH v2 5.10.x] mtd: spinand: Fix incorrect parameters for on-die ECC

by Frieder Schrempf

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> The new generic NAND ECC framework stores the configuration and requirements in separate places since commit 93ef92f6f422 ("mtd: nand: Use the new generic ECC object"). In 5.10.x The SPI NAND layer still uses only the requirements to track the ECC properties. This mismatch leads to values of zero being used for ECC strength and step_size in the SPI NAND layer wherever nanddev_get_ecc_conf() is used and therefore breaks the SPI NAND on-die ECC support in 5.10.x. By using nanddev_get_ecc_requirements() instead of nanddev_get_ecc_conf() for SPI NAND, we make sure that the correct parameters for the detected chip are used. In later versions (5.11.x) this is fixed anyway with the implementation of the SPI NAND on-die ECC engine. Cc: stable(a)vger.kernel.org # 5.10.x Reported-by: voice INTER connect GmbH <developer(a)voiceinterconnect.de> Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> Acked-by: Miquel Raynal <miquel.raynal(a)bootlin.com> --- Changes in v2: * Fix checkpatch error/warnings for commit message style * Add Miquel's A-b tag --- drivers/mtd/nand/spi/core.c | 6 +++--- drivers/mtd/nand/spi/macronix.c | 6 +++--- drivers/mtd/nand/spi/toshiba.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index 558d8a14810b..8794a1f6eacd 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status) * fixed, so let's return the maximum possible value so that * wear-leveling layers move the data immediately. */ - return nanddev_get_ecc_conf(nand)->strength; + return nanddev_get_ecc_requirements(nand)->strength; case STATUS_ECC_UNCOR_ERROR: return -EBADMSG; @@ -1090,8 +1090,8 @@ static int spinand_init(struct spinand_device *spinand) mtd->oobavail = ret; /* Propagate ECC information to mtd_info */ - mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength; - mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size; + mtd->ecc_strength = nanddev_get_ecc_requirements(nand)->strength; + mtd->ecc_step_size = nanddev_get_ecc_requirements(nand)->step_size; return 0; diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index 8e801e4c3a00..cd7a9cacc3fb 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -84,11 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand, * data around if it's not necessary. */ if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr)) - return nanddev_get_ecc_conf(nand)->strength; + return nanddev_get_ecc_requirements(nand)->strength; - if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength || + if (WARN_ON(eccsr > nanddev_get_ecc_requirements(nand)->strength || !eccsr)) - return nanddev_get_ecc_conf(nand)->strength; + return nanddev_get_ecc_requirements(nand)->strength; return eccsr; diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c index 21fde2875674..6fe7bd2a94d2 100644 --- a/drivers/mtd/nand/spi/toshiba.c +++ b/drivers/mtd/nand/spi/toshiba.c @@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, * data around if it's not necessary. */ if (spi_mem_exec_op(spinand->spimem, &op)) - return nanddev_get_ecc_conf(nand)->strength; + return nanddev_get_ecc_requirements(nand)->strength; mbf >>= 4; - if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf)) - return nanddev_get_ecc_conf(nand)->strength; + if (WARN_ON(mbf > nanddev_get_ecc_requirements(nand)->strength || !mbf)) + return nanddev_get_ecc_requirements(nand)->strength; return mbf; -- 2.32.0

3 years, 8 months

[PATCH stable-5.4.y] btrfs: fix race between marking inode needs to be logged and log syncing

by Anand Jain

From: Filipe Manana <fdmanana(a)suse.com> commit bc0939fcfab0d7efb2ed12896b1af3d819954a14 upstream. We have a race between marking that an inode needs to be logged, either at btrfs_set_inode_last_trans() or at btrfs_page_mkwrite(), and between btrfs_sync_log(). The following steps describe how the race happens. 1) We are at transaction N; 2) Inode I was previously fsynced in the current transaction so it has: inode->logged_trans set to N; 3) The inode's root currently has: root->log_transid set to 1 root->last_log_commit set to 0 Which means only one log transaction was committed to far, log transaction 0. When a log tree is created we set ->log_transid and ->last_log_commit of its parent root to 0 (at btrfs_add_log_tree()); 4) One more range of pages is dirtied in inode I; 5) Some task A starts an fsync against some other inode J (same root), and so it joins log transaction 1. Before task A calls btrfs_sync_log()... 6) Task B starts an fsync against inode I, which currently has the full sync flag set, so it starts delalloc and waits for the ordered extent to complete before calling btrfs_inode_in_log() at btrfs_sync_file(); 7) During ordered extent completion we have btrfs_update_inode() called against inode I, which in turn calls btrfs_set_inode_last_trans(), which does the following: spin_lock(&inode->lock); inode->last_trans = trans->transaction->transid; inode->last_sub_trans = inode->root->log_transid; inode->last_log_commit = inode->root->last_log_commit; spin_unlock(&inode->lock); So ->last_trans is set to N and ->last_sub_trans set to 1. But before setting ->last_log_commit... 8) Task A is at btrfs_sync_log(): - it increments root->log_transid to 2 - starts writeback for all log tree extent buffers - waits for the writeback to complete - writes the super blocks - updates root->last_log_commit to 1 It's a lot of slow steps between updating root->log_transid and root->last_log_commit; 9) The task doing the ordered extent completion, currently at btrfs_set_inode_last_trans(), then finally runs: inode->last_log_commit = inode->root->last_log_commit; spin_unlock(&inode->lock); Which results in inode->last_log_commit being set to 1. The ordered extent completes; 10) Task B is resumed, and it calls btrfs_inode_in_log() which returns true because we have all the following conditions met: inode->logged_trans == N which matches fs_info->generation && inode->last_subtrans (1) <= inode->last_log_commit (1) && inode->last_subtrans (1) <= root->last_log_commit (1) && list inode->extent_tree.modified_extents is empty And as a consequence we return without logging the inode, so the existing logged version of the inode does not point to the extent that was written after the previous fsync. It should be impossible in practice for one task be able to do so much progress in btrfs_sync_log() while another task is at btrfs_set_inode_last_trans() right after it reads root->log_transid and before it reads root->last_log_commit. Even if kernel preemption is enabled we know the task at btrfs_set_inode_last_trans() can not be preempted because it is holding the inode's spinlock. However there is another place where we do the same without holding the spinlock, which is in the memory mapped write path at: vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf) { (...) BTRFS_I(inode)->last_trans = fs_info->generation; BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid; BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit; (...) So with preemption happening after setting ->last_sub_trans and before setting ->last_log_commit, it is less of a stretch to have another task do enough progress at btrfs_sync_log() such that the task doing the memory mapped write ends up with ->last_sub_trans and ->last_log_commit set to the same value. It is still a big stretch to get there, as the task doing btrfs_sync_log() has to start writeback, wait for its completion and write the super blocks. So fix this in two different ways: 1) For btrfs_set_inode_last_trans(), simply set ->last_log_commit to the value of ->last_sub_trans minus 1; 2) For btrfs_page_mkwrite() only set the inode's ->last_sub_trans, just like we do for buffered and direct writes at btrfs_file_write_iter(), which is all we need to make sure multiple writes and fsyncs to an inode in the same transaction never result in an fsync missing that the inode changed and needs to be logged. Turn this into a helper function and use it both at btrfs_page_mkwrite() and at btrfs_file_write_iter() - this also fixes the problem that at btrfs_page_mkwrite() we were setting those fields without the protection of the inode's spinlock. This is an extremely unlikely race to happen in practice. Signed-off-by: Filipe Manana <fdmanana(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Anand Jain <anand.jain(a)oracle.com> --- fs/btrfs/btrfs_inode.h | 15 +++++++++++++++ fs/btrfs/file.c | 10 ++-------- fs/btrfs/inode.c | 4 +--- fs/btrfs/transaction.h | 2 +- 4 files changed, 19 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index f853835c409c..f3ff57b93158 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -268,6 +268,21 @@ static inline void btrfs_mod_outstanding_extents(struct btrfs_inode *inode, mod); } +/* + * Called every time after doing a buffered, direct IO or memory mapped write. + * + * This is to ensure that if we write to a file that was previously fsynced in + * the current transaction, then try to fsync it again in the same transaction, + * we will know that there were changes in the file and that it needs to be + * logged. + */ +static inline void btrfs_set_inode_last_sub_trans(struct btrfs_inode *inode) +{ + spin_lock(&inode->lock); + inode->last_sub_trans = inode->root->log_transid; + spin_unlock(&inode->lock); +} + static inline int btrfs_inode_in_log(struct btrfs_inode *inode, u64 generation) { int ret = 0; diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 400b0717b9d4..1279359ed172 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -2004,14 +2004,8 @@ static ssize_t btrfs_file_write_iter(struct kiocb *iocb, inode_unlock(inode); - /* - * We also have to set last_sub_trans to the current log transid, - * otherwise subsequent syncs to a file that's been synced in this - * transaction will appear to have already occurred. - */ - spin_lock(&BTRFS_I(inode)->lock); - BTRFS_I(inode)->last_sub_trans = root->log_transid; - spin_unlock(&BTRFS_I(inode)->lock); + btrfs_set_inode_last_sub_trans(BTRFS_I(inode)); + if (num_written > 0) num_written = generic_write_sync(iocb, num_written); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b044b1d910de..1117335374ff 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -9250,9 +9250,7 @@ vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf) set_page_dirty(page); SetPageUptodate(page); - BTRFS_I(inode)->last_trans = fs_info->generation; - BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid; - BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit; + btrfs_set_inode_last_sub_trans(BTRFS_I(inode)); unlock_extent_cached(io_tree, page_start, page_end, &cached_state); diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index d8a7d460e436..cbede328bda5 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -160,7 +160,7 @@ static inline void btrfs_set_inode_last_trans(struct btrfs_trans_handle *trans, spin_lock(&BTRFS_I(inode)->lock); BTRFS_I(inode)->last_trans = trans->transaction->transid; BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid; - BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit; + BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->last_sub_trans - 1; spin_unlock(&BTRFS_I(inode)->lock); } -- 2.31.1

3 years, 8 months

[PATCH] efi/cper: use stack buffer for error record decoding

by Ard Biesheuvel

Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it. Cc: <stable(a)vger.kernel.org> Reported-by: Joe Perches <joe(a)perches.com> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> --- drivers/firmware/efi/cper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c index 73bdbd207e7a..6ec8edec6329 100644 --- a/drivers/firmware/efi/cper.c +++ b/drivers/firmware/efi/cper.c @@ -25,8 +25,6 @@ #include <acpi/ghes.h> #include <ras/ras_event.h> -static char rcd_decode_str[CPER_REC_LEN]; - /* * CPER record ID need to be unique even after reboot, because record * ID is used as index for ERST storage, while CPER records from @@ -312,6 +310,7 @@ const char *cper_mem_err_unpack(struct trace_seq *p, struct cper_mem_err_compact *cmem) { const char *ret = trace_seq_buffer_ptr(p); + char rcd_decode_str[CPER_REC_LEN]; if (cper_mem_err_location(cmem, rcd_decode_str)) trace_seq_printf(p, "%s", rcd_decode_str); @@ -326,6 +325,7 @@ static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem, int len) { struct cper_mem_err_compact cmem; + char rcd_decode_str[CPER_REC_LEN]; /* Don't trust UEFI 2.1/2.2 structure with bad validation bits */ if (len == sizeof(struct cper_sec_mem_err_old) && -- 2.30.2

3 years, 8 months

[PATCH] wcn36xx: handle connection loss indication

by Benjamin Li

Firmware sends delete_sta_context_ind when it detects the AP has gone away in STA mode. Right now the handler for that indication only handles AP mode; fix it to also handle STA mode. Cc: stable(a)vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Benjamin Li <benl(a)squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> --- drivers/net/wireless/ath/wcn36xx/smd.c | 44 +++++++++++++++++++------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c index 57fa857b290b..f6bea896abe8 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.c +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -2623,30 +2623,52 @@ static int wcn36xx_smd_delete_sta_context_ind(struct wcn36xx *wcn, size_t len) { struct wcn36xx_hal_delete_sta_context_ind_msg *rsp = buf; - struct wcn36xx_vif *tmp; + struct wcn36xx_vif *vif_priv; + struct ieee80211_vif *vif; + struct ieee80211_bss_conf *bss_conf; struct ieee80211_sta *sta; + bool found = false; if (len != sizeof(*rsp)) { wcn36xx_warn("Corrupted delete sta indication\n"); return -EIO; } - wcn36xx_dbg(WCN36XX_DBG_HAL, "delete station indication %pM index %d\n", - rsp->addr2, rsp->sta_id); + wcn36xx_dbg(WCN36XX_DBG_HAL, + "delete station indication %pM index %d reason %d\n", + rsp->addr2, rsp->sta_id, rsp->reason_code); - list_for_each_entry(tmp, &wcn->vif_list, list) { + list_for_each_entry(vif_priv, &wcn->vif_list, list) { rcu_read_lock(); - sta = ieee80211_find_sta(wcn36xx_priv_to_vif(tmp), rsp->addr2); - if (sta) - ieee80211_report_low_ack(sta, 0); + vif = wcn36xx_priv_to_vif(vif_priv); + + if (vif->type == NL80211_IFTYPE_STATION) { + /* We could call ieee80211_find_sta too, but checking + * bss_conf is clearer. + */ + bss_conf = &vif->bss_conf; + if (vif_priv->sta_assoc && + !memcmp(bss_conf->bssid, rsp->addr2, ETH_ALEN)) { + found = true; + wcn36xx_dbg(WCN36XX_DBG_HAL, + "connection loss bss_index %d\n", + vif_priv->bss_index); + ieee80211_connection_loss(vif); + } + } else { + sta = ieee80211_find_sta(vif, rsp->addr2); + if (sta) { + found = true; + ieee80211_report_low_ack(sta, 0); + } + } + rcu_read_unlock(); - if (sta) + if (found) return 0; } - wcn36xx_warn("STA with addr %pM and index %d not found\n", - rsp->addr2, - rsp->sta_id); + wcn36xx_warn("BSS or STA with addr %pM not found\n", rsp->addr2); return -ENOENT; } -- 2.17.1

3 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2021