September 2021 - Linux-stable-mirror

Re: [PATCH 2/3] usb: isp1760: do not sleep in field register poll

by Rui Miguel Silva

Hi Greg, forgot to ask you, can you please merge this one to stable #5.14.y? At the time I was not sure if it was getting in final 5.14 or not. It applies clean on top of 5.14.7. And without it, it triggers BUG sleep in atomic checks. upstream commit: 41f673183862a1 usb: isp1760: do not sleep in field register poll https://lore.kernel.org/r/20210727100516.4190681-3-rui.silva@linaro.org fixes tag: Fixes: 1da9e1c06873 ("usb: isp1760: move to regmap for register access") Thanks in advance, Cheers, Rui On Tue Jul 27, 2021 at 11:05 AM WEST, Rui Miguel Silva wrote: ---- 8< ---------------------------------------------- > When polling for a setup or clear of a register field we were sleeping > in atomic context but using a very tight sleep interval. > > Since the use cases for this poll mechanism are only in setup and > stop paths, and in practice this poll is not used most of the times > but needs to be there to comply to hardware setup times, remove the > sleep time and make the poll loop tighter. > > Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> > Signed-off-by: Rui Miguel Silva <rui.silva(a)linaro.org> > --- > drivers/usb/isp1760/isp1760-hcd.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c > index a745c4c2b773..a018394d54f8 100644 > --- a/drivers/usb/isp1760/isp1760-hcd.c > +++ b/drivers/usb/isp1760/isp1760-hcd.c > @@ -250,7 +250,7 @@ static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field, > isp1760_hcd_set(hcd, field); > > return regmap_field_read_poll_timeout(priv->fields[field], val, > - val, 10, timeout_us); > + val, 0, timeout_us); > } > > static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field, > @@ -262,7 +262,7 @@ static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field, > isp1760_hcd_set(hcd, field); > > return regmap_field_read_poll_timeout(priv->fields[field], val, > - !val, 10, timeout_us); > + !val, 0, timeout_us); > } > > static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field, > @@ -274,7 +274,7 @@ static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field, > isp1760_hcd_clear(hcd, field); > > return regmap_field_read_poll_timeout(priv->fields[field], val, > - !val, 10, timeout_us); > + !val, 0, timeout_us); > } > > static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field) > -- > 2.32.0

3 years, 4 months

2
3
0 0

FAILED: patch "[PATCH] USB: serial: cp210x: fix dropped characters with CP2102" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c32dfec6c1c36bbbcd5d33e949d99aeb215877ec Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Wed, 22 Sep 2021 13:30:59 +0200 Subject: [PATCH] USB: serial: cp210x: fix dropped characters with CP2102 Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comme… Reported-by: Malte Di Donato <malte(a)neo-soft.org> Tested-by: Malte Di Donato <malte(a)neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable(a)vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold <johan(a)kernel.org> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 66a6ac50a4cd..b98454fe08ea 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -258,6 +258,7 @@ struct cp210x_serial_private { speed_t max_speed; bool use_actual_rate; bool no_flow_control; + bool no_event_mode; }; enum cp210x_event_state { @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret; if (port_priv->event_mode) return; + if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true; @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) } switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; case CP210X_PARTNUM_CP2105: case CP210X_PARTNUM_CP2108: cp210x_get_fw_version(serial, CP210X_GET_FW_VER);

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] USB: serial: cp210x: fix dropped characters with CP2102" failed to apply to 5.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c32dfec6c1c36bbbcd5d33e949d99aeb215877ec Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Wed, 22 Sep 2021 13:30:59 +0200 Subject: [PATCH] USB: serial: cp210x: fix dropped characters with CP2102 Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comme… Reported-by: Malte Di Donato <malte(a)neo-soft.org> Tested-by: Malte Di Donato <malte(a)neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable(a)vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold <johan(a)kernel.org> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 66a6ac50a4cd..b98454fe08ea 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -258,6 +258,7 @@ struct cp210x_serial_private { speed_t max_speed; bool use_actual_rate; bool no_flow_control; + bool no_event_mode; }; enum cp210x_event_state { @@ -1113,12 +1114,16 @@ static void cp210x_change_speed(struct tty_struct *tty, static void cp210x_enable_event_mode(struct usb_serial_port *port) { + struct cp210x_serial_private *priv = usb_get_serial_data(port->serial); struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int ret; if (port_priv->event_mode) return; + if (priv->no_event_mode) + return; + port_priv->event_state = ES_DATA; port_priv->event_mode = true; @@ -2074,6 +2079,33 @@ static void cp210x_init_max_speed(struct usb_serial *serial) priv->use_actual_rate = use_actual_rate; } +static void cp2102_determine_quirks(struct usb_serial *serial) +{ + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + u8 *buf; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return; + /* + * Some (possibly counterfeit) CP2102 do not support event-insertion + * mode and respond differently to malformed vendor requests. + * Specifically, they return one instead of two bytes when sent a + * two-byte part-number request. + */ + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST, + CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT); + if (ret == 1) { + dev_dbg(&serial->interface->dev, + "device does not support event-insertion mode\n"); + priv->no_event_mode = true; + } + + kfree(buf); +} + static int cp210x_get_fw_version(struct usb_serial *serial, u16 value) { struct cp210x_serial_private *priv = usb_get_serial_data(serial); @@ -2109,6 +2141,9 @@ static void cp210x_determine_type(struct usb_serial *serial) } switch (priv->partnum) { + case CP210X_PARTNUM_CP2102: + cp2102_determine_quirks(serial); + break; case CP210X_PARTNUM_CP2105: case CP210X_PARTNUM_CP2108: cp210x_get_fw_version(serial, CP210X_GET_FW_VER);

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] cifs: Clear modified attribute bit from inode flags" failed to apply to 5.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 4f22262280ccb5c0a18a42029313938aabfaff12 Mon Sep 17 00:00:00 2001 From: Steve French <stfrench(a)microsoft.com> Date: Thu, 23 Sep 2021 12:42:35 -0500 Subject: [PATCH] cifs: Clear modified attribute bit from inode flags Clear CIFS_INO_MODIFIED_ATTR bit from inode flags after updating mtime and ctime Signed-off-by: Rohith Surabattula <rohiths(a)microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc(a)cjr.nz> Acked-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Cc: stable(a)vger.kernel.org # 5.13+ Signed-off-by: Steve French <stfrench(a)microsoft.com> diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0ab5bb24b8ca..13f3182cf796 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -884,7 +884,7 @@ int cifs_close(struct inode *inode, struct file *file) cinode->lease_granted && !test_bit(CIFS_INO_CLOSE_ON_LOCK, &cinode->flags) && dclose) { - if (test_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { + if (test_and_clear_bit(CIFS_INO_MODIFIED_ATTR, &cinode->flags)) { inode->i_ctime = inode->i_mtime = current_time(inode); cifs_fscache_update_inode_cookie(inode); }

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] usb: gadget: f_uac2: Populate SS descriptors'" failed to apply to 5.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f0e8a206a2a53a919e1709c654cb65d519f7befb Mon Sep 17 00:00:00 2001 From: Jack Pham <jackp(a)codeaurora.org> Date: Thu, 9 Sep 2021 10:48:11 -0700 Subject: [PATCH] usb: gadget: f_uac2: Populate SS descriptors' wBytesPerInterval For Isochronous endpoints, the SS companion descriptor's wBytesPerInterval field is required to reserve bus time in order to transmit the required payload during the service interval. If left at 0, the UAC2 function is unable to transact data on its playback or capture endpoints in SuperSpeed mode. Since f_uac2 currently does not support any bursting this value can be exactly equal to the calculated wMaxPacketSize. Tested with Windows 10 as a host. Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Jack Pham <jackp(a)codeaurora.org> Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d89c1ebb07f4..be864560bfea 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -1178,6 +1178,9 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep_maxpsize = max_t(u16, agdev->out_ep_maxpsize, le16_to_cpu(ss_epout_desc.wMaxPacketSize)); + ss_epin_desc_comp.wBytesPerInterval = ss_epin_desc.wMaxPacketSize; + ss_epout_desc_comp.wBytesPerInterval = ss_epout_desc.wMaxPacketSize; + // HS and SS endpoint addresses are copied from autoconfigured FS descriptors hs_ep_int_desc.bEndpointAddress = fs_ep_int_desc.bEndpointAddress; hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] usb: gadget: f_uac2: Add missing companion descriptor for" failed to apply to 5.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 595091a1426a3b2625dad322f69fe569dc9d8943 Mon Sep 17 00:00:00 2001 From: Jack Pham <jackp(a)codeaurora.org> Date: Thu, 9 Sep 2021 10:48:10 -0700 Subject: [PATCH] usb: gadget: f_uac2: Add missing companion descriptor for feedback EP The f_uac2 function fails to enumerate when connected in SuperSpeed due to the feedback endpoint missing the companion descriptor. Add a new ss_epin_fback_desc_comp descriptor and append it behind the ss_epin_fback_desc both in the static definition of the ss_audio_desc structure as well as its dynamic construction in setup_headers(). Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Jack Pham <jackp(a)codeaurora.org> Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 3c34995276e7..d89c1ebb07f4 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -406,6 +406,14 @@ static struct usb_endpoint_descriptor ss_epin_fback_desc = { .bInterval = 4, }; +static struct usb_ss_ep_comp_descriptor ss_epin_fback_desc_comp = { + .bLength = sizeof(ss_epin_fback_desc_comp), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(4), +}; + /* Audio Streaming IN Interface - Alt0 */ static struct usb_interface_descriptor std_as_in_if0_desc = { @@ -597,6 +605,7 @@ static struct usb_descriptor_header *ss_audio_desc[] = { (struct usb_descriptor_header *)&ss_epout_desc_comp, (struct usb_descriptor_header *)&as_iso_out_desc, (struct usb_descriptor_header *)&ss_epin_fback_desc, + (struct usb_descriptor_header *)&ss_epin_fback_desc_comp, (struct usb_descriptor_header *)&std_as_in_if0_desc, (struct usb_descriptor_header *)&std_as_in_if1_desc, @@ -705,6 +714,7 @@ static void setup_headers(struct f_uac2_opts *opts, { struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL; struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL; + struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL; struct usb_endpoint_descriptor *epout_desc; struct usb_endpoint_descriptor *epin_desc; struct usb_endpoint_descriptor *epin_fback_desc; @@ -730,6 +740,7 @@ static void setup_headers(struct f_uac2_opts *opts, epout_desc_comp = &ss_epout_desc_comp; epin_desc_comp = &ss_epin_desc_comp; epin_fback_desc = &ss_epin_fback_desc; + epin_fback_desc_comp = &ss_epin_fback_desc_comp; ep_int_desc = &ss_ep_int_desc; } @@ -773,8 +784,11 @@ static void setup_headers(struct f_uac2_opts *opts, headers[i++] = USBDHDR(&as_iso_out_desc); - if (EPOUT_FBACK_IN_EN(opts)) + if (EPOUT_FBACK_IN_EN(opts)) { headers[i++] = USBDHDR(epin_fback_desc); + if (epin_fback_desc_comp) + headers[i++] = USBDHDR(epin_fback_desc_comp); + } } if (EPIN_EN(opts)) {

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 91bb163e1e4f88092f50dfaa5a816b658753e4b2 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Date: Thu, 9 Sep 2021 14:45:15 +0400 Subject: [PATCH] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.16311757… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 837237e4bc96..f09cbdfac9df 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) */ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + hs_ep->target_frame += hs_ep->interval; - if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + if (hs_ep->target_frame > limit) { hs_ep->frame_overrun = true; - hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + hs_ep->target_frame &= limit; } else { hs_ep->frame_overrun = false; } @@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) */ static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + if (hs_ep->target_frame) hs_ep->target_frame -= 1; else - hs_ep->target_frame = DSTS_SOFFN_LIMIT; + hs_ep->target_frame = limit; } /** @@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, depctl); } +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } } - if (hs_ep->isochronous && hs_ep->interval == 1) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); - dwc2_gadget_incr_frame_num(hs_ep); - - if (hs_ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } } ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ @@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) u32 target_frame = hs_ep->target_frame; u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; if (!frame_overrun && current_frame >= target_frame) return true; if (frame_overrun && current_frame >= target_frame && - ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + ((current_frame - target_frame) < limit / 2)) return true; return false; @@ -1713,11 +1740,9 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) */ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) { - u32 mask; struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; struct dwc2_hsotg_req *hs_req; - u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; if (!list_empty(&hs_ep->queue)) { hs_req = get_ep_head(hs_ep); @@ -1733,9 +1758,6 @@ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) } else { dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", __func__); - mask = dwc2_readl(hsotg, epmsk_reg); - mask |= DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, mask, epmsk_reg); } } @@ -2306,19 +2328,6 @@ static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); } -static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, - u32 epctl_reg) -{ - u32 ctrl; - - ctrl = dwc2_readl(hsotg, epctl_reg); - if (ctrl & DXEPCTL_EOFRNUM) - ctrl |= DXEPCTL_SETEVENFR; - else - ctrl |= DXEPCTL_SETODDFR; - dwc2_writel(hsotg, ctrl, epctl_reg); -} - /* * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc * @hs_ep - The endpoint on which transfer went @@ -2439,20 +2448,11 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) dwc2_hsotg_ep0_zlp(hsotg, true); } - /* - * Slave mode OUT transfers do not go through XferComplete so - * adjust the ISOC parity here. - */ - if (!using_dma(hsotg)) { - if (hs_ep->isochronous && hs_ep->interval == 1) - dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum)); - else if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - } - /* Set actual frame number for completed transfers */ - if (!using_desc_dma(hsotg) && hs_ep->isochronous) - req->frame_number = hsotg->frame_number; + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } @@ -2766,6 +2766,12 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } @@ -2826,23 +2832,18 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); - if (hs_ep->isochronous) { - dwc2_hsotg_complete_in(hsotg, hs_ep); - return; - } - if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = dwc2_readl(hsotg, DCTL); dctl |= DCTL_CGNPINNAK; dwc2_writel(hsotg, dctl, DCTL); } - return; - } + } else { - if (dctl & DCTL_GOUTNAKSTS) { - dctl |= DCTL_CGOUTNAK; - dwc2_writel(hsotg, dctl, DCTL); + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } } if (!hs_ep->isochronous) @@ -2863,8 +2864,6 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); - - dwc2_gadget_start_next_request(hs_ep); } /** @@ -2881,8 +2880,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) { struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = ep->dir_in; - u32 doepmsk; if (dir_in || !ep->isochronous) return; @@ -2896,28 +2895,39 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) return; } - if (ep->interval > 1 && - ep->target_frame == TARGET_FRAME_INITIAL) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { u32 ctrl; ep->target_frame = hsotg->frame_number; - dwc2_gadget_incr_frame_num(ep); + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; - ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); - if (ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } + } + + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); - dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } - dwc2_gadget_start_next_request(ep); - doepmsk = dwc2_readl(hsotg, DOEPMSK); - doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, doepmsk, DOEPMSK); + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + /** * dwc2_gadget_handle_nak - handle NAK interrupt * @hs_ep: The endpoint on which interrupt is asserted. @@ -2935,7 +2945,9 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = hs_ep->dir_in; + u32 ctrl; if (!dir_in || !hs_ep->isochronous) return; @@ -2977,13 +2989,29 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); } - - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); } - if (!using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); } /** @@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * need to look at completing IN requests here * if operating slave mode */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_complete_in(hsotg, hs_ep); - if (ints & DXEPINT_NAKINTRPT) - ints &= ~DXEPINT_NAKINTRPT; + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) dwc2_hsotg_enqueue_setup(hsotg); @@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * We're using DMA, we need to fire an OutDone here * as we ignore the RXFIFO. */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_handle_outdone(hsotg, idx); + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); } } @@ -4085,6 +4107,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, mask |= DIEPMSK_NAKMSK; dwc2_writel(hsotg, mask, DIEPMSK); } else { + epctrl |= DXEPCTL_SNAK; mask = dwc2_readl(hsotg, DOEPMSK); mask |= DOEPMSK_OUTTKNEPDISMSK; dwc2_writel(hsotg, mask, DOEPMSK);

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 91bb163e1e4f88092f50dfaa5a816b658753e4b2 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Date: Thu, 9 Sep 2021 14:45:15 +0400 Subject: [PATCH] usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave According USB spec each ISOC transaction should be performed in a designated for that transaction interval. On bus errors or delays in operating system scheduling of client software can result in no packet being transferred for a (micro)frame. An error indication should be returned as status to the client software in such a case. Current implementation in case of missed/dropped interval send same data in next possible interval instead of reporting missed isoc. This fix complete requests with -ENODATA if interval elapsed. HSOTG core in BDMA and Slave modes haven't HW support for (micro)frames tracking, this is why SW should care about tracking of (micro)frames. Because of that method and consider operating system scheduling delays, added few additional checking's of elapsed target (micro)frame: 1. Immediately before enabling EP to start transfer. 2. With any transfer completion interrupt. 3. With incomplete isoc in/out interrupt. 4. With EP disabled interrupt because of incomplete transfer. 5. With OUT token received while EP disabled interrupt (for OUT transfers). 6. With NAK replied to IN token interrupt (for IN transfers). As part of ISOC flow, additionally fixed 'current' and 'target' frame calculation functions. In HS mode SOF limits provided by DSTS register is 0x3fff, but in non HS mode this limit is 0x7ff. Tested by internal tool which also using for dwc3 testing. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.16311757… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 837237e4bc96..f09cbdfac9df 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -115,10 +115,16 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) */ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + hs_ep->target_frame += hs_ep->interval; - if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + if (hs_ep->target_frame > limit) { hs_ep->frame_overrun = true; - hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + hs_ep->target_frame &= limit; } else { hs_ep->frame_overrun = false; } @@ -136,10 +142,16 @@ static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) */ static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) { + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + if (hs_ep->target_frame) hs_ep->target_frame -= 1; else - hs_ep->target_frame = DSTS_SOFFN_LIMIT; + hs_ep->target_frame = limit; } /** @@ -1018,6 +1030,12 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, depctl); } +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + /** * dwc2_hsotg_start_req - start a USB request from an endpoint's queue * @hsotg: The controller state. @@ -1170,14 +1188,19 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, } } - if (hs_ep->isochronous && hs_ep->interval == 1) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); - dwc2_gadget_incr_frame_num(hs_ep); - - if (hs_ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } } ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ @@ -1325,12 +1348,16 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) u32 target_frame = hs_ep->target_frame; u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; if (!frame_overrun && current_frame >= target_frame) return true; if (frame_overrun && current_frame >= target_frame && - ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + ((current_frame - target_frame) < limit / 2)) return true; return false; @@ -1713,11 +1740,9 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) */ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) { - u32 mask; struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; struct dwc2_hsotg_req *hs_req; - u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; if (!list_empty(&hs_ep->queue)) { hs_req = get_ep_head(hs_ep); @@ -1733,9 +1758,6 @@ static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) } else { dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", __func__); - mask = dwc2_readl(hsotg, epmsk_reg); - mask |= DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, mask, epmsk_reg); } } @@ -2306,19 +2328,6 @@ static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); } -static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg, - u32 epctl_reg) -{ - u32 ctrl; - - ctrl = dwc2_readl(hsotg, epctl_reg); - if (ctrl & DXEPCTL_EOFRNUM) - ctrl |= DXEPCTL_SETEVENFR; - else - ctrl |= DXEPCTL_SETODDFR; - dwc2_writel(hsotg, ctrl, epctl_reg); -} - /* * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc * @hs_ep - The endpoint on which transfer went @@ -2439,20 +2448,11 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) dwc2_hsotg_ep0_zlp(hsotg, true); } - /* - * Slave mode OUT transfers do not go through XferComplete so - * adjust the ISOC parity here. - */ - if (!using_dma(hsotg)) { - if (hs_ep->isochronous && hs_ep->interval == 1) - dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum)); - else if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - } - /* Set actual frame number for completed transfers */ - if (!using_desc_dma(hsotg) && hs_ep->isochronous) - req->frame_number = hsotg->frame_number; + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } @@ -2766,6 +2766,12 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, return; } + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } @@ -2826,23 +2832,18 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); - if (hs_ep->isochronous) { - dwc2_hsotg_complete_in(hsotg, hs_ep); - return; - } - if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { int dctl = dwc2_readl(hsotg, DCTL); dctl |= DCTL_CGNPINNAK; dwc2_writel(hsotg, dctl, DCTL); } - return; - } + } else { - if (dctl & DCTL_GOUTNAKSTS) { - dctl |= DCTL_CGOUTNAK; - dwc2_writel(hsotg, dctl, DCTL); + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } } if (!hs_ep->isochronous) @@ -2863,8 +2864,6 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /* Update current frame number value. */ hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); - - dwc2_gadget_start_next_request(hs_ep); } /** @@ -2881,8 +2880,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) { struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = ep->dir_in; - u32 doepmsk; if (dir_in || !ep->isochronous) return; @@ -2896,28 +2895,39 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) return; } - if (ep->interval > 1 && - ep->target_frame == TARGET_FRAME_INITIAL) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { u32 ctrl; ep->target_frame = hsotg->frame_number; - dwc2_gadget_incr_frame_num(ep); + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; - ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); - if (ep->target_frame & 0x1) - ctrl |= DXEPCTL_SETODDFR; - else - ctrl |= DXEPCTL_SETEVENFR; + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } + } + + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); - dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } - dwc2_gadget_start_next_request(ep); - doepmsk = dwc2_readl(hsotg, DOEPMSK); - doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; - dwc2_writel(hsotg, doepmsk, DOEPMSK); + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + /** * dwc2_gadget_handle_nak - handle NAK interrupt * @hs_ep: The endpoint on which interrupt is asserted. @@ -2935,7 +2945,9 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; int dir_in = hs_ep->dir_in; + u32 ctrl; if (!dir_in || !hs_ep->isochronous) return; @@ -2977,13 +2989,29 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); } - - dwc2_hsotg_complete_request(hsotg, hs_ep, - get_ep_head(hs_ep), 0); } - if (!using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); } /** @@ -3048,12 +3076,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * need to look at completing IN requests here * if operating slave mode */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_complete_in(hsotg, hs_ep); - if (ints & DXEPINT_NAKINTRPT) - ints &= ~DXEPINT_NAKINTRPT; + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); if (idx == 0 && !hs_ep->req) dwc2_hsotg_enqueue_setup(hsotg); @@ -3062,10 +3086,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, * We're using DMA, we need to fire an OutDone here * as we ignore the RXFIFO. */ - if (hs_ep->isochronous && hs_ep->interval > 1) - dwc2_gadget_incr_frame_num(hs_ep); - - dwc2_hsotg_handle_outdone(hsotg, idx); + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); } } @@ -4085,6 +4107,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, mask |= DIEPMSK_NAKMSK; dwc2_writel(hsotg, mask, DIEPMSK); } else { + epctrl |= DXEPCTL_SNAK; mask = dwc2_readl(hsotg, DOEPMSK); mask |= DOEPMSK_OUTTKNEPDISMSK; dwc2_writel(hsotg, mask, DOEPMSK);

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] usb: gadget: u_audio: EP-OUT bInterval in fback frequency" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f5dfd98a80ff8d50cf4ae2820857d7f5a46cbab9 Mon Sep 17 00:00:00 2001 From: Pavel Hofman <pavel.hofman(a)ivitera.com> Date: Mon, 6 Sep 2021 15:08:22 +0200 Subject: [PATCH] usb: gadget: u_audio: EP-OUT bInterval in fback frequency The patch increases the bitshift in feedback frequency calculation with EP-OUT bInterval value. Tests have revealed that Win10 and OSX UAC2 drivers require the feedback frequency to be based on the actual packet interval instead of on the USB2 microframe. Otherwise they ignore the feedback value. Linux snd-usb-audio driver detects the applied bitshift automatically. Tested-by: Henrik Enquist <henrik.enquist(a)gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman(a)ivitera.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 32ef22857083..ad16163b5ff8 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -96,11 +96,13 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { }; static void u_audio_set_fback_frequency(enum usb_device_speed speed, + struct usb_ep *out_ep, unsigned long long freq, unsigned int pitch, void *buf) { u32 ff = 0; + const struct usb_endpoint_descriptor *ep_desc; /* * Because the pitch base is 1000000, the final divider here @@ -128,8 +130,13 @@ static void u_audio_set_fback_frequency(enum usb_device_speed speed, * byte fromat (that is Q16.16) * * ff = (freq << 16) / 8000 + * + * Win10 and OSX UAC2 drivers require number of samples per packet + * in order to honor the feedback value. + * Linux snd-usb-audio detects the applied bit-shift automatically. */ - freq <<= 4; + ep_desc = out_ep->desc; + freq <<= 4 + (ep_desc->bInterval - 1); } ff = DIV_ROUND_CLOSEST_ULL((freq * pitch), 1953125); @@ -267,7 +274,7 @@ static void u_audio_iso_fback_complete(struct usb_ep *ep, pr_debug("%s: iso_complete status(%d) %d/%d\n", __func__, status, req->actual, req->length); - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, audio_dev->out_ep, params->c_srate, prm->pitch, req->buf); @@ -526,7 +533,7 @@ int u_audio_start_capture(struct g_audio *audio_dev) * be meauserd at start of playback */ prm->pitch = 1000000; - u_audio_set_fback_frequency(audio_dev->gadget->speed, + u_audio_set_fback_frequency(audio_dev->gadget->speed, ep, params->c_srate, prm->pitch, req_fback->buf);

3 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] ocfs2: drop acl cache for directories too" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9c0f0a03e386f4e1df33db676401547e1b7800c6 Mon Sep 17 00:00:00 2001 From: Wengang Wang <wen.gang.wang(a)oracle.com> Date: Fri, 24 Sep 2021 15:43:35 -0700 Subject: [PATCH] ocfs2: drop acl cache for directories too ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang(a)oracle.com> Reviewed-by: Joseph Qi <joseph.qi(a)linux.alibaba.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Changwei Ge <gechangwei(a)live.cn> Cc: Gang He <ghe(a)suse.com> Cc: Jun Piao <piaojun(a)huawei.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 359524b7341f..801e60bab955 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3951,7 +3951,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, oi = OCFS2_I(inode); oi->ip_dir_lock_gen++; mlog(0, "generation: %u\n", oi->ip_dir_lock_gen); - goto out; + goto out_forget; } if (!S_ISREG(inode->i_mode)) @@ -3982,6 +3982,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, filemap_fdatawait(mapping); } +out_forget: forget_all_cached_acls(inode); out:

3 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2021