From: Fabiano Rosas <farosas(a)suse.de>
Our linker script for optionroms specifies only the placement of the
.text section, leaving the linker free to place the remaining sections
at arbitrary places in the file.
Since at least binutils 2.39, the .note.gnu.build-id section is now
being placed at the start of the file, which causes label addresses to
be shifted. For linuxboot_dma.bin that means that the PnP header
(among others) will not be found when determining the type of ROM at
optionrom_setup():
(0x1c is the label _pnph, where the magic "PnP" is)
$ xxd /usr/share/qemu/linuxboot_dma.bin | grep "PnP"
00000010: 0000 0000 0000 0000 0000 1c00 2450 6e50 ............$PnP
$ xxd pc-bios/optionrom/linuxboot_dma.bin | grep "PnP"
00000010: 0000 0000 0000 0000 0000 4c00 2450 6e50 ............$PnP
^bad
Using a freshly built linuxboot_dma.bin ROM results in a broken boot:
SeaBIOS (version rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org)
Booting from Hard Disk...
Boot failed: could not read the boot disk
Booting from Floppy...
Boot failed: could not read the boot disk
No bootable device.
We're not using the build-id section, so pass the --build-id=none
option to the linker to remove it entirely.
Note: In theory, this same issue could happen with any other
section. The ideal solution would be to have all unused sections
discarded in the linker script. However that would be a larger change,
specially for the pvh rom which uses the .bss and COMMON sections so
I'm addressing only the immediate issue here.
Reported-by: Vasiliy Ulyanov <vulyanov(a)suse.de>
Signed-off-by: Fabiano Rosas <farosas(a)suse.de>
Reviewed-by: Thomas Huth <thuth(a)redhat.com>
Message-ID: <20230926192502.15986-1-farosas(a)suse.de>
Cc: stable(a)vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com>
---
pc-bios/optionrom/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pc-bios/optionrom/Makefile b/pc-bios/optionrom/Makefile
index b1fff0ba6c8..30d07026c79 100644
--- a/pc-bios/optionrom/Makefile
+++ b/pc-bios/optionrom/Makefile
@@ -36,7 +36,7 @@ config-cc.mak: Makefile
$(call cc-option,-Wno-array-bounds)) 3> config-cc.mak
-include config-cc.mak
-override LDFLAGS = -nostdlib -Wl,-T,$(SRC_DIR)/flat.lds
+override LDFLAGS = -nostdlib -Wl,--build-id=none,-T,$(SRC_DIR)/flat.lds
pvh.img: pvh.o pvh_main.o
--
2.41.0
Attn: stable(a)vger.kernel.org
Date: 03-10-2023
Subject: Letter of Intent (LOI) (03-10-2023)
This is a Letter of Intent concerning my Board of investors intent to fund some of your available investment projects.
If this is of any interest to you then kindly advise.
Yours Faithfully,
Ahmad R. Deeb
Head of Investment Team
The following problem exists since x2avic was enabled in the KVM:
svm_set_x2apic_msr_interception is called to enable the interception of
the x2apic msrs.
In particular it is called at the moment the guest resets its apic.
Assuming that the guest's apic was in x2apic mode, the reset will bring
it back to the xapic mode.
The svm_set_x2apic_msr_interception however has an erroneous check for
'!apic_x2apic_mode()' which prevents it from doing anything in this case.
As a result of this, all x2apic msrs are left unintercepted, and that
exposes the bare metal x2apic (if enabled) to the guest.
Oops.
Remove the erroneous '!apic_x2apic_mode()' check to fix that.
This fixes CVE-2023-5090
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable(a)vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk(a)redhat.com>
---
arch/x86/kvm/svm/svm.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 9507df93f410a63..acdd0b89e4715a3 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -913,8 +913,7 @@ void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool intercept)
if (intercept == svm->x2avic_msrs_intercepted)
return;
- if (!x2avic_enabled ||
- !apic_x2apic_mode(svm->vcpu.arch.apic))
+ if (!x2avic_enabled)
return;
for (i = 0; i < MAX_DIRECT_ACCESS_MSRS; i++) {
--
2.26.3
From: Catalin Marinas <catalin.marinas(a)arm.com>
Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.
Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.
Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com>
Reported-by: Christoph Paasch <cpaasch(a)apple.com>
Closes: https://lore.kernel.org/all/F903A825-F05F-4B77-A2B5-7356282FBA2C@apple.com/
Cc: <stable(a)vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch(a)apple.com>
Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org>
---
kernel/rcu/tree.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index cb1caefa8bd0..24423877962c 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -31,6 +31,7 @@
#include <linux/bitops.h>
#include <linux/export.h>
#include <linux/completion.h>
+#include <linux/kmemleak.h>
#include <linux/moduleparam.h>
#include <linux/panic.h>
#include <linux/panic_notifier.h>
@@ -3388,6 +3389,14 @@ void kvfree_call_rcu(struct rcu_head *head, void *ptr)
success = true;
}
+ /*
+ * The kvfree_rcu() caller considers the pointer freed at this point
+ * and likely removes any references to it. Since the actual slab
+ * freeing (and kmemleak_free()) is deferred, tell kmemleak to ignore
+ * this object (no scanning or false positives reporting).
+ */
+ kmemleak_ignore(ptr);
+
// Set timer to drain after KFREE_DRAIN_JIFFIES.
if (rcu_scheduler_active == RCU_SCHEDULER_RUNNING)
schedule_delayed_monitor_work(krcp);
--
2.42.0.582.g8ccd20d70d-goog
Hi Thinh,
I can confirm your patch fixed the issue on RK3399 when I was running
on Linux 6.1.54.
I'm not on the ML for this so I'm sorry if this email causes any issue
as I'm not sure how to reply to a thread from a ML I am not on.
Best,
Da
Like the Lenovo 82TL, 82V2, 82QF and 82UG, the 82YM (Yoga 7 14ARP8)
requires an entry in the quirk list to enable the internal microphone.
The latter two received similar fixes in commit 1263cc0f414d
("ASoC: amd: yc: Fix non-functional mic on Lenovo 82QF and 82UG").
Fixes: c008323fe361 ("ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ")
Cc: stable(a)vger.kernel.org
Signed-off-by: Sven Frotscher <sven.frotscher(a)gmail.com>
---
v3->v4 changes:
* re-add blank line between commit message title and body
---
v2->v3 changes:
* add message title of referenced commit to commit message
* make whitespace consistent with surrounding code
* use a patch-friendly e-mail client
---
v1->v2 changes:
* add Fixes and Cc tags to commit message
* remove redundant LKML link from commit message
* fix mangled diff
---
sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 94e9eb8e73f2..15a864dcd7bd 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -241,6 +241,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "82V2"),
}
},
+ {
+ .driver_data = &acp6x_card,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "82YM"),
+ }
+ },
{
.driver_data = &acp6x_card,
.matches = {
--
2.42.0
The quilt patch titled
Subject: i915: limit the length of an sg list to the requested length
has been removed from the -mm tree. Its filename was
i915-limit-the-length-of-an-sg-list-to-the-requested-length.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: "Matthew Wilcox (Oracle)" <willy(a)infradead.org>
Subject: i915: limit the length of an sg list to the requested length
Date: Tue, 19 Sep 2023 20:48:55 +0100
The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
Link: https://lkml.kernel.org/r/20230919194855.347582-1-willy@infradead.org
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Signed-off-by: Matthew Wilcox (Oracle) <willy(a)infradead.org>
Reported-by: Oleksandr Natalenko <oleksandr(a)natalenko.name>
Closes: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/
Tested-by: Oleksandr Natalenko <oleksandr(a)natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda(a)intel.com>
Cc: Jani Nikula <jani.nikula(a)linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin(a)linux.intel.com>
Cc: <stable(a)vger.kernel.org> [6.5.x]
Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org>
---
drivers/gpu/drm/i915/gem/i915_gem_shmem.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_shmem.c~i915-limit-the-length-of-an-sg-list-to-the-requested-length
+++ a/drivers/gpu/drm/i915/gem/i915_gem_shmem.c
@@ -100,6 +100,7 @@ int shmem_sg_alloc_table(struct drm_i915
st->nents = 0;
for (i = 0; i < page_count; i++) {
struct folio *folio;
+ unsigned long nr_pages;
const unsigned int shrink[] = {
I915_SHRINK_BOUND | I915_SHRINK_UNBOUND,
0,
@@ -150,6 +151,8 @@ int shmem_sg_alloc_table(struct drm_i915
}
} while (1);
+ nr_pages = min_t(unsigned long,
+ folio_nr_pages(folio), page_count - i);
if (!i ||
sg->length >= max_segment ||
folio_pfn(folio) != next_pfn) {
@@ -157,13 +160,13 @@ int shmem_sg_alloc_table(struct drm_i915
sg = sg_next(sg);
st->nents++;
- sg_set_folio(sg, folio, folio_size(folio), 0);
+ sg_set_folio(sg, folio, nr_pages * PAGE_SIZE, 0);
} else {
/* XXX: could overflow? */
- sg->length += folio_size(folio);
+ sg->length += nr_pages * PAGE_SIZE;
}
- next_pfn = folio_pfn(folio) + folio_nr_pages(folio);
- i += folio_nr_pages(folio) - 1;
+ next_pfn = folio_pfn(folio) + nr_pages;
+ i += nr_pages - 1;
/* Check that the i965g/gm workaround works. */
GEM_BUG_ON(gfp & __GFP_DMA32 && next_pfn >= 0x00100000UL);
_
Patches currently in -mm which might be from willy(a)infradead.org are
mm-convert-dax-lock-unlock-page-to-lock-unlock-folio.patch
buffer-pass-gfp-flags-to-folio_alloc_buffers.patch
buffer-hoist-gfp-flags-from-grow_dev_page-to-__getblk_gfp.patch
buffer-hoist-gfp-flags-from-grow_dev_page-to-__getblk_gfp-fix.patch
ext4-use-bdev_getblk-to-avoid-memory-reclaim-in-readahead-path.patch
buffer-use-bdev_getblk-to-avoid-memory-reclaim-in-readahead-path.patch
buffer-convert-getblk_unmovable-and-__getblk-to-use-bdev_getblk.patch
buffer-convert-sb_getblk-to-call-__getblk.patch
ext4-call-bdev_getblk-from-sb_getblk_gfp.patch
buffer-remove-__getblk_gfp.patch
hugetlb-use-a-folio-in-free_hpage_workfn.patch
hugetlb-remove-a-few-calls-to-page_folio.patch
hugetlb-convert-remove_pool_huge_page-to-remove_pool_hugetlb_folio.patch
mm-make-lock_folio_maybe_drop_mmap-vma-lock-aware.patch
mm-call-wp_page_copy-under-the-vma-lock.patch
mm-handle-shared-faults-under-the-vma-lock.patch
mm-handle-cow-faults-under-the-vma-lock.patch
mm-handle-read-faults-under-the-vma-lock.patch
mm-handle-write-faults-to-ro-pages-under-the-vma-lock.patch
Upstream commit 717c6ec241b5 ("can: sja1000: Prevent overrun stalls with
a soft reset on Renesas SoCs") fixes an issue with Renesas own SJA1000
CAN controller reception: the Rx buffer is only 5 messages long, so when
the bus loaded (eg. a message every 50us), overrun may easily
happen. Upon an overrun situation, due to a possible internal crosstalk
situation, the controller enters a frozen state which only can be
unlocked with a soft reset (experimentally). The solution was to offload
a call to sja1000_start() in a threaded handler. This needs to happen in
process context as this operation requires to sleep. sja1000_start()
basically enters "reset mode", performs a proper software reset and
returns back into "normal mode".
Since this fix was introduced, we no longer observe any stalls in
reception. However it was sporadically observed that the transmit path
would now freeze. Further investigation blamed the fix mentioned above,
and especially the reset operation. Reproducing the reset in a loop
helped identifying what could possibly go wrong. The sja1000 is a single
Tx queue device, which leverages the netdev helpers to process one Tx
message at a time. The logic is: the queue is stopped, the message sent
to the transceiver, once properly transmitted the controller sets a
status bit which triggers an interrupt, in the interrupt handler the
transmission status is checked and the queue woken up. Unfortunately, if
an overrun happens, we might perform the soft reset precisely between
the transmission of the buffer to the transceiver and the advent of the
transmission status bit. We would then stop the transmission operation
without re-enabling the queue, leading to all further transmissions to
be ignored.
The reset interrupt can only happen while the device is "open", and
after a reset we anyway want to resume normal operations, no matter if a
packet to transmit got dropped in the process, so we shall wake up the
queue. Restarting the device and waking-up the queue is exactly what
sja1000_set_mode(CAN_MODE_START) does. In order to be consistent about
the queue state, we must acquire a lock both in the reset handler and in
the transmit path to ensure serialization of both operations. As the
reset handler might still be called after the transmission of a frame to
the transceiver but before it actually gets transmitted, we must ensure
we don't leak the skb, so we free it (the behavior is consistent, no
matter if there was an skb on the stack or not).
Fixes: 717c6ec241b5 ("can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCs")
Cc: stable(a)vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com>
---
Changes in v2:
* As Marc sugested, use netif_tx_{,un}lock() instead of our own
spin_lock.
drivers/net/can/sja1000/sja1000.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index ae47fc72aa96..91e3fb3eed20 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -297,6 +297,7 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
+ netif_tx_lock(dev);
netif_stop_queue(dev);
fi = dlc = cf->can_dlc;
@@ -335,6 +336,8 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
sja1000_write_cmdreg(priv, cmd_reg_val);
+ netif_tx_unlock(dev);
+
return NETDEV_TX_OK;
}
@@ -396,7 +399,13 @@ static irqreturn_t sja1000_reset_interrupt(int irq, void *dev_id)
struct net_device *dev = (struct net_device *)dev_id;
netdev_dbg(dev, "performing a soft reset upon overrun\n");
- sja1000_start(dev);
+
+ netif_tx_lock(dev);
+
+ can_free_echo_skb(dev, 0);
+ sja1000_set_mode(dev, CAN_MODE_START);
+
+ netif_tx_unlock(dev);
return IRQ_HANDLED;
}
--
2.34.1