November 2023 - Linux-stable-mirror

FAILED: patch "[PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112215-sprinkled-enroll-7fc3@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") 02be109d3a40 ("Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables") 069f534247bb ("bluetooth: Add device 13d3:3571 to device tables") 730a1d1a93a3 ("bluetooth: Add device 0bda:887b to device tables") 393b4916b7b5 ("Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c Mon Sep 17 00:00:00 2001 From: Guan Wentao <guanwentao(a)uniontech.com> Date: Thu, 12 Oct 2023 19:21:17 +0800 Subject: [PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable(a)vger.kernel.org Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Guan Wentao <guanwentao(a)uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d793dcd06687..b8e9de887b5d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112213-grumbling-pedicure-10ce@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") 02be109d3a40 ("Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables") 069f534247bb ("bluetooth: Add device 13d3:3571 to device tables") 730a1d1a93a3 ("bluetooth: Add device 0bda:887b to device tables") 393b4916b7b5 ("Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c Mon Sep 17 00:00:00 2001 From: Guan Wentao <guanwentao(a)uniontech.com> Date: Thu, 12 Oct 2023 19:21:17 +0800 Subject: [PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable(a)vger.kernel.org Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Guan Wentao <guanwentao(a)uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d793dcd06687..b8e9de887b5d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE" failed to apply to 6.5-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.5.y git checkout FETCH_HEAD git cherry-pick -x da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112211-unclothed-kinetic-334f@gregkh' --subject-prefix 'PATCH 6.5.y' HEAD^.. Possible dependencies: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") 02be109d3a40 ("Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c Mon Sep 17 00:00:00 2001 From: Guan Wentao <guanwentao(a)uniontech.com> Date: Thu, 12 Oct 2023 19:21:17 +0800 Subject: [PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable(a)vger.kernel.org Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Guan Wentao <guanwentao(a)uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d793dcd06687..b8e9de887b5d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112209-proponent-scary-1ae8@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: da06ff1f585e ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") 02be109d3a40 ("Bluetooth: btusb: Add RTW8852BE device 13d3:3570 to device tables") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From da06ff1f585ea784c79f80e7fab0e0c4ebb49c1c Mon Sep 17 00:00:00 2001 From: Guan Wentao <guanwentao(a)uniontech.com> Date: Thu, 12 Oct 2023 19:21:17 +0800 Subject: [PATCH] Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable(a)vger.kernel.org Signed-off-by: Meng Tang <tangmeng(a)uniontech.com> Signed-off-by: Guan Wentao <guanwentao(a)uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d793dcd06687..b8e9de887b5d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -544,6 +544,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] clk: visconti: Fix undefined behavior bug in struct" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 5ad1e217a2b23aa046b241183bd9452d259d70d0 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112230-baggage-playback-8fc5@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 5ad1e217a2b2 ("clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider") 7e626a080bb2 ("clk: visconti: remove unused visconti_pll_provider::regmap") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5ad1e217a2b23aa046b241183bd9452d259d70d0 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" <gustavoars(a)kernel.org> Date: Mon, 16 Oct 2023 16:05:27 -0600 Subject: [PATCH] clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider `struct clk_hw_onecell_data` is a flexible structure, which means that it contains flexible-array member at the bottom, in this case array `hws`: include/linux/clk-provider.h: 1380 struct clk_hw_onecell_data { 1381 unsigned int num; 1382 struct clk_hw *hws[] __counted_by(num); 1383 }; This could potentially lead to an overwrite of the objects following `clk_data` in `struct visconti_pll_provider`, in this case `struct device_node *node;`, at run-time: drivers/clk/visconti/pll.h: 16 struct visconti_pll_provider { 17 void __iomem *reg_base; 18 struct clk_hw_onecell_data clk_data; 19 struct device_node *node; 20 }; Notice that a total of 56 bytes are allocated for flexible-array `hws` at line 328. See below: include/dt-bindings/clock/toshiba,tmpv770x.h: 14 #define TMPV770X_NR_PLL 7 drivers/clk/visconti/pll-tmpv770x.c: 69 ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL); drivers/clk/visconti/pll.c: 321 struct visconti_pll_provider * __init visconti_init_pll(struct device_node *np, 322 void __iomem *base, 323 unsigned long nr_plls) 324 { 325 struct visconti_pll_provider *ctx; ... 328 ctx = kzalloc(struct_size(ctx, clk_data.hws, nr_plls), GFP_KERNEL); `struct_size(ctx, clk_data.hws, nr_plls)` above translates to sizeof(struct visconti_pll_provider) + sizeof(struct clk_hw *) * 7 == 24 + 8 * 7 == 24 + 56 ^^^^ | allocated bytes for flex array `hws` $ pahole -C visconti_pll_provider drivers/clk/visconti/pll.o struct visconti_pll_provider { void * reg_base; /* 0 8 */ struct clk_hw_onecell_data clk_data; /* 8 8 */ struct device_node * node; /* 16 8 */ /* size: 24, cachelines: 1, members: 3 */ /* last cacheline: 24 bytes */ }; And then, after the allocation, some data is written into all members of `struct visconti_pll_provider`: 332 for (i = 0; i < nr_plls; ++i) 333 ctx->clk_data.hws[i] = ERR_PTR(-ENOENT); 334 335 ctx->node = np; 336 ctx->reg_base = base; 337 ctx->clk_data.num = nr_plls; Fix all these by placing the declaration of object `clk_data` at the end of `struct visconti_pll_provider`. Also, add a comment to make it clear that this object must always be last in the structure, and prevent this bug from being introduced again in the future. -Wflex-array-member-not-at-end is coming in GCC-14, and we are getting ready to enable it globally. Fixes: b4cbe606dc36 ("clk: visconti: Add support common clock driver and reset driver") Cc: stable(a)vger.kernel.org Reviewed-by: Kees Cook <keescook(a)chromium.org> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu(a)toshiba.co.jp> Signed-off-by: Gustavo A. R. Silva <gustavoars(a)kernel.org> Link: https://lore.kernel.org/r/57a831d94ee2b3889b11525d4ad500356f89576f.16974928… Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> diff --git a/drivers/clk/visconti/pll.h b/drivers/clk/visconti/pll.h index 01d07f1bf01b..c4bd40676da4 100644 --- a/drivers/clk/visconti/pll.h +++ b/drivers/clk/visconti/pll.h @@ -15,8 +15,10 @@ struct visconti_pll_provider { void __iomem *reg_base; - struct clk_hw_onecell_data clk_data; struct device_node *node; + + /* Must be last */ + struct clk_hw_onecell_data clk_data; }; #define VISCONTI_PLL_RATE(_rate, _dacen, _dsmen, \

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] cpufreq: stats: Fix buffer overflow detection in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ea167a7fc2426f7685c3735e104921c1a20a6d3f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112200-frenzied-liking-978f@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: ea167a7fc242 ("cpufreq: stats: Fix buffer overflow detection in trans_stats()") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea167a7fc2426f7685c3735e104921c1a20a6d3f Mon Sep 17 00:00:00 2001 From: Christian Marangi <ansuelsmth(a)gmail.com> Date: Tue, 24 Oct 2023 20:30:14 +0200 Subject: [PATCH] cpufreq: stats: Fix buffer overflow detection in trans_stats() Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") switched from snprintf to the more secure scnprintf but never updated the exit condition for PAGE_SIZE. As the commit say and as scnprintf document, what scnprintf returns what is actually written not counting the '\0' end char. This results in the case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be written at max PAGE_SIZE - 1 (as '\0' is not counted) Because of len is never set to PAGE_SIZE, the function never break early, never prints the warning and never return -EFBIG. Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger the error. Cc: 5.10+ <stable(a)vger.kernel.org> # 5.10+ Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index a33df3c66c88..40a9ff18da06 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -131,23 +131,23 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, " From : To\n"); len += sysfs_emit_at(buf, len, " : "); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u ", stats->freq_table[i]); } - if (len >= PAGE_SIZE) - return PAGE_SIZE; + if (len >= PAGE_SIZE - 1) + return PAGE_SIZE - 1; len += sysfs_emit_at(buf, len, "\n"); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u: ", stats->freq_table[i]); for (j = 0; j < stats->state_num; j++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; if (pending) @@ -157,12 +157,12 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, "%9u ", count); } - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "\n"); } - if (len >= PAGE_SIZE) { + if (len >= PAGE_SIZE - 1) { pr_warn_once("cpufreq transition table exceeds PAGE_SIZE. Disabling\n"); return -EFBIG; }

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] cpufreq: stats: Fix buffer overflow detection in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ea167a7fc2426f7685c3735e104921c1a20a6d3f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112259-willpower-movable-0aa9@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: ea167a7fc242 ("cpufreq: stats: Fix buffer overflow detection in trans_stats()") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea167a7fc2426f7685c3735e104921c1a20a6d3f Mon Sep 17 00:00:00 2001 From: Christian Marangi <ansuelsmth(a)gmail.com> Date: Tue, 24 Oct 2023 20:30:14 +0200 Subject: [PATCH] cpufreq: stats: Fix buffer overflow detection in trans_stats() Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") switched from snprintf to the more secure scnprintf but never updated the exit condition for PAGE_SIZE. As the commit say and as scnprintf document, what scnprintf returns what is actually written not counting the '\0' end char. This results in the case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be written at max PAGE_SIZE - 1 (as '\0' is not counted) Because of len is never set to PAGE_SIZE, the function never break early, never prints the warning and never return -EFBIG. Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger the error. Cc: 5.10+ <stable(a)vger.kernel.org> # 5.10+ Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index a33df3c66c88..40a9ff18da06 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -131,23 +131,23 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, " From : To\n"); len += sysfs_emit_at(buf, len, " : "); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u ", stats->freq_table[i]); } - if (len >= PAGE_SIZE) - return PAGE_SIZE; + if (len >= PAGE_SIZE - 1) + return PAGE_SIZE - 1; len += sysfs_emit_at(buf, len, "\n"); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u: ", stats->freq_table[i]); for (j = 0; j < stats->state_num; j++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; if (pending) @@ -157,12 +157,12 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, "%9u ", count); } - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "\n"); } - if (len >= PAGE_SIZE) { + if (len >= PAGE_SIZE - 1) { pr_warn_once("cpufreq transition table exceeds PAGE_SIZE. Disabling\n"); return -EFBIG; }

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] cpufreq: stats: Fix buffer overflow detection in" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x ea167a7fc2426f7685c3735e104921c1a20a6d3f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112257-imaging-antiviral-52c3@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: ea167a7fc242 ("cpufreq: stats: Fix buffer overflow detection in trans_stats()") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea167a7fc2426f7685c3735e104921c1a20a6d3f Mon Sep 17 00:00:00 2001 From: Christian Marangi <ansuelsmth(a)gmail.com> Date: Tue, 24 Oct 2023 20:30:14 +0200 Subject: [PATCH] cpufreq: stats: Fix buffer overflow detection in trans_stats() Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") switched from snprintf to the more secure scnprintf but never updated the exit condition for PAGE_SIZE. As the commit say and as scnprintf document, what scnprintf returns what is actually written not counting the '\0' end char. This results in the case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be written at max PAGE_SIZE - 1 (as '\0' is not counted) Because of len is never set to PAGE_SIZE, the function never break early, never prints the warning and never return -EFBIG. Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger the error. Cc: 5.10+ <stable(a)vger.kernel.org> # 5.10+ Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index a33df3c66c88..40a9ff18da06 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -131,23 +131,23 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, " From : To\n"); len += sysfs_emit_at(buf, len, " : "); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u ", stats->freq_table[i]); } - if (len >= PAGE_SIZE) - return PAGE_SIZE; + if (len >= PAGE_SIZE - 1) + return PAGE_SIZE - 1; len += sysfs_emit_at(buf, len, "\n"); for (i = 0; i < stats->state_num; i++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "%9u: ", stats->freq_table[i]); for (j = 0; j < stats->state_num; j++) { - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; if (pending) @@ -157,12 +157,12 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf) len += sysfs_emit_at(buf, len, "%9u ", count); } - if (len >= PAGE_SIZE) + if (len >= PAGE_SIZE - 1) break; len += sysfs_emit_at(buf, len, "\n"); } - if (len >= PAGE_SIZE) { + if (len >= PAGE_SIZE - 1) { pr_warn_once("cpufreq transition table exceeds PAGE_SIZE. Disabling\n"); return -EFBIG; }

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] pmdomain: imx: Make imx pgc power domain also set the fwnode" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 374de39d38f97b0e58cfee88da590b2d056ccf7f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112258-fancied-capsize-64cb@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 374de39d38f9 ("pmdomain: imx: Make imx pgc power domain also set the fwnode") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 374de39d38f97b0e58cfee88da590b2d056ccf7f Mon Sep 17 00:00:00 2001 From: Pengfei Li <pengfei.li_1(a)nxp.com> Date: Sat, 21 Oct 2023 02:59:49 +0800 Subject: [PATCH] pmdomain: imx: Make imx pgc power domain also set the fwnode Currently, The imx pgc power domain doesn't set the fwnode pointer, which results in supply regulator device can't get consumer imx pgc power domain device from fwnode when creating a link. This causes the driver core to instead try to create a link between the parent gpc device of imx pgc power domain device and supply regulator device. However, at this point, the gpc device has already been bound, and the link creation will fail. So adding the fwnode pointer to the imx pgc power domain device will fix this issue. Signed-off-by: Pengfei Li <pengfei.li_1(a)nxp.com> Tested-by: Emil Kronborg <emil.kronborg(a)protonmail.com> Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust") Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/pmdomain/imx/gpc.c b/drivers/pmdomain/imx/gpc.c index 90a8b2c0676f..419ed15cc10c 100644 --- a/drivers/pmdomain/imx/gpc.c +++ b/drivers/pmdomain/imx/gpc.c @@ -498,6 +498,7 @@ static int imx_gpc_probe(struct platform_device *pdev) pd_pdev->dev.parent = &pdev->dev; pd_pdev->dev.of_node = np; + pd_pdev->dev.fwnode = of_fwnode_handle(np); ret = platform_device_add(pd_pdev); if (ret) {

1 year, 11 months

1
0
0 0

FAILED: patch "[PATCH] pmdomain: imx: Make imx pgc power domain also set the fwnode" failed to apply to 6.5-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.5.y git checkout FETCH_HEAD git cherry-pick -x 374de39d38f97b0e58cfee88da590b2d056ccf7f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023112257-armless-stump-64b8@gregkh' --subject-prefix 'PATCH 6.5.y' HEAD^.. Possible dependencies: 374de39d38f9 ("pmdomain: imx: Make imx pgc power domain also set the fwnode") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 374de39d38f97b0e58cfee88da590b2d056ccf7f Mon Sep 17 00:00:00 2001 From: Pengfei Li <pengfei.li_1(a)nxp.com> Date: Sat, 21 Oct 2023 02:59:49 +0800 Subject: [PATCH] pmdomain: imx: Make imx pgc power domain also set the fwnode Currently, The imx pgc power domain doesn't set the fwnode pointer, which results in supply regulator device can't get consumer imx pgc power domain device from fwnode when creating a link. This causes the driver core to instead try to create a link between the parent gpc device of imx pgc power domain device and supply regulator device. However, at this point, the gpc device has already been bound, and the link creation will fail. So adding the fwnode pointer to the imx pgc power domain device will fix this issue. Signed-off-by: Pengfei Li <pengfei.li_1(a)nxp.com> Tested-by: Emil Kronborg <emil.kronborg(a)protonmail.com> Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust") Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20231020185949.537083-1-pengfei.li_1@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/pmdomain/imx/gpc.c b/drivers/pmdomain/imx/gpc.c index 90a8b2c0676f..419ed15cc10c 100644 --- a/drivers/pmdomain/imx/gpc.c +++ b/drivers/pmdomain/imx/gpc.c @@ -498,6 +498,7 @@ static int imx_gpc_probe(struct platform_device *pdev) pd_pdev->dev.parent = &pdev->dev; pd_pdev->dev.of_node = np; + pd_pdev->dev.fwnode = of_fwnode_handle(np); ret = platform_device_add(pd_pdev); if (ret) {

1 year, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2023