April 2023 - Linux-stable-mirror

[PATCH linux-5.15.y] RISC-V: Fix up a cherry-pick warning in setup_vm_final()

by Palmer Dabbelt

This triggers a -Wdeclaration-after-statement as the code has changed a bit since upstream. It might be better to hoist the whole block up, but this is a smaller change so I went with it. arch/riscv/mm/init.c:755:16: warning: mixing declarations and code is a C99 extension [-Wdeclaration-after-statement] unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT)); ^ 1 warning generated. Reported-by: kernel test robot <lkp(a)intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304300429.SXZOA5up-lkp@intel.com/ Signed-off-by: Palmer Dabbelt <palmer(a)rivosinc.com> --- I haven't even build tested this one, but it looks simple enough that I figured I'd just send it. Be warned, though: I broke glibc and missed a merged conflict yesterday... --- arch/riscv/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index e800d7981e99..8d67f43f1865 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -717,6 +717,7 @@ static void __init setup_vm_final(void) uintptr_t va, map_size; phys_addr_t pa, start, end; u64 i; + unsigned long idx; /** * MMU is enabled at this point. But page table setup is not complete yet. @@ -735,7 +736,7 @@ static void __init setup_vm_final(void) * directly in swapper_pg_dir in addition to the pgd entry that points * to fixmap_pte. */ - unsigned long idx = pgd_index(__fix_to_virt(FIX_FDT)); + idx = pgd_index(__fix_to_virt(FIX_FDT)); set_pgd(&swapper_pg_dir[idx], early_pg_dir[idx]); #endif -- 2.40.0

1 year, 7 months

3
2
0 0

Pink sardine ACP stability issue

by Mario Limonciello

Hi, Some Pink Sardine platforms have some stability problems with reboot cycling and it has been root caused to a misconfigured mux for audio. It's been fixed in this commit: a4d432e9132c ("ASoC: amd: ps: update the acp clock source.") Can you please backport this to 6.1.y + Thanks,

1 year, 7 months

2
2
0 0

Mediatek mt76 issue

by Mario Limonciello

Hi, A number of laptops with Mediatek wifi the wifi doesn't work unless you turn off fast boot in BIOS setup. These laptops all ship with fast boot as the default. It's been fixed by this commit: 09d4d6da1b65 ("wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unset") Can you please bring it to 5.15.y and later? Thanks,

1 year, 7 months

2
1
0 0

[PATCH v3 1/2] drm/atomic: Allow vblank-enabled + self-refresh "disable"

by Brian Norris

The self-refresh helper framework overloads "disable" to sometimes mean "go into self-refresh mode," and this mode activates automatically (e.g., after some period of unchanging display output). In such cases, the display pipe is still considered "on", and user-space is not aware that we went into self-refresh mode. Thus, users may expect that vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work properly. However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave vblank enabled. Add a different expectation: that CRTCs *should* leave vblank enabled when going into self-refresh. This patch is preparation for another patch -- "drm/rockchip: vop: Leave vblank enabled in self-refresh" -- which resolves conflicts between the above self-refresh behavior and the API tests in IGT's kms_vblank test module. == Some alternatives discussed: == It's likely that on many display controllers, vblank interrupts will turn off when the CRTC is disabled, and so in some cases, self-refresh may not support vblank. To support such cases, we might consider additions to the generic helpers such that we fire vblank events based on a timer. However, there is currently only one driver using the common self-refresh helpers (i.e., rockchip), and at least as of commit bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"), the CRTC hardware is powered enough to continue to generate vblank interrupts. So we chose the simpler option of leaving vblank interrupts enabled. We can reevaluate this decision and perhaps augment the helpers if/when we gain a second driver that has different requirements. v3: * include discussion summary v2: * add 'ret != 0' warning case for self-refresh * describe failing test case and relation to drm/rockchip patch better Cc: <stable(a)vger.kernel.org> # dependency for "drm/rockchip: vop: Leave # vblank enabled in self-refresh" Signed-off-by: Brian Norris <briannorris(a)chromium.org> --- drivers/gpu/drm/drm_atomic_helper.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index d579fd8f7cb8..a22485e3e924 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1209,7 +1209,16 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) continue; ret = drm_crtc_vblank_get(crtc); - WARN_ONCE(ret != -EINVAL, "driver forgot to call drm_crtc_vblank_off()\n"); + /* + * Self-refresh is not a true "disable"; ensure vblank remains + * enabled. + */ + if (new_crtc_state->self_refresh_active) + WARN_ONCE(ret != 0, + "driver disabled vblank in self-refresh\n"); + else + WARN_ONCE(ret != -EINVAL, + "driver forgot to call drm_crtc_vblank_off()\n"); if (ret == 0) drm_crtc_vblank_put(crtc); } -- 2.39.0.314.g84b9a713c41-goog

1 year, 7 months

2
2
0 0

[PATCH v3 1/2] vsprintf: Add %p[mM]U for uppercase MAC address

by Konrad Gräfe

The CDC-ECM specification requires an USB gadget to send the host MAC address as uppercase hex string. This change adds the appropriate modifier. Cc: stable(a)vger.kernel.org Signed-off-by: Konrad Gräfe <k.graefe(a)gateware.de> --- Added in v3 lib/vsprintf.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index be71a03c936a..8aee1caabd9e 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1269,9 +1269,10 @@ char *mac_address_string(char *buf, char *end, u8 *addr, { char mac_addr[sizeof("xx:xx:xx:xx:xx:xx")]; char *p = mac_addr; - int i; + int i, pos; char separator; bool reversed = false; + bool uppercase = false; if (check_pointer(&buf, end, addr, spec)) return buf; @@ -1281,6 +1282,10 @@ char *mac_address_string(char *buf, char *end, u8 *addr, separator = '-'; break; + case 'U': + uppercase = true; + break; + case 'R': reversed = true; fallthrough; @@ -1292,9 +1297,14 @@ char *mac_address_string(char *buf, char *end, u8 *addr, for (i = 0; i < 6; i++) { if (reversed) - p = hex_byte_pack(p, addr[5 - i]); + pos = 5 - i; + else + pos = i; + + if (uppercase) + p = hex_byte_pack_upper(p, addr[pos]); else - p = hex_byte_pack(p, addr[i]); + p = hex_byte_pack(p, addr[pos]); if (fmt[0] == 'M' && i != 5) *p++ = separator; @@ -2279,6 +2289,7 @@ char *rust_fmt_argument(char *buf, char *end, void *ptr); * - 'm' For a 6-byte MAC address, it prints the hex address without colons * - 'MF' For a 6-byte MAC FDDI address, it prints the address * with a dash-separated hex notation + * - '[mM]U' For a 6-byte MAC address in uppercase hex * - '[mM]R' For a 6-byte MAC address, Reverse order (Bluetooth) * - 'I' [46] for IPv4/IPv6 addresses printed in the usual way * IPv4 uses dot-separated decimal without leading 0's (1.2.3.4) @@ -2407,6 +2418,7 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, case 'M': /* Colon separated: 00:01:02:03:04:05 */ case 'm': /* Contiguous: 000102030405 */ /* [mM]F (FDDI) */ + /* [mM]U (Uppercase hex) */ /* [mM]R (Reverse order; Bluetooth) */ return mac_address_string(buf, end, ptr, spec, fmt); case 'I': /* Formatted IP supported -- 2.34.1

1 year, 7 months

7
15
0 0

[PATCH] wifi: ath10k: Serialize wake_tx_queue ops

by Alexander Wetzel

Serialize the ath10k implementation of the wake_tx_queue ops. ath10k_mac_op_wake_tx_queue() must not run concurrent since it's using ieee80211_txq_schedule_start(). Fixes: bb2edb733586 ("ath10k: migrate to mac80211 txq scheduling") Reported-by: Felix Fietkau <nbd(a)nbd.name> Link: https://lore.kernel.org/r/519b5bb9-8899-ae7c-4eff-f3116cdfdb56@nbd.name CC: <stable(a)vger.kernel.org> Signed-off-by: Alexander Wetzel <alexander(a)wetzel-home.de> --- The intend of this patch is to sort out an issue discovered in the discussion referred to by the Link tag. I can't test it with real HW and thus just implemented the per-ac queue lock Felix suggested. One obvious alternative to the per-ac lock would be to bring back the txqs_lock commit bb2edb733586 ("ath10k: migrate to mac80211 txq scheduling") dropped. Alexander --- drivers/net/wireless/ath/ath10k/core.c | 3 +++ drivers/net/wireless/ath/ath10k/core.h | 3 +++ drivers/net/wireless/ath/ath10k/mac.c | 6 ++++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 5eb131ab916f..533ed7169e11 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -3643,6 +3643,9 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, mutex_init(&ar->dump_mutex); spin_lock_init(&ar->data_lock); + for (int ac = 0; ac < IEEE80211_NUM_ACS; ac++) + spin_lock_init(&ar->queue_lock[ac]); + INIT_LIST_HEAD(&ar->peers); init_waitqueue_head(&ar->peer_mapping_wq); init_waitqueue_head(&ar->htt.empty_tx_wq); diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index f5de8ce8fb45..4b5239de4018 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -1170,6 +1170,9 @@ struct ath10k { /* protects shared structure data */ spinlock_t data_lock; + /* serialize wake_tx_queue calls per ac */ + spinlock_t queue_lock[IEEE80211_NUM_ACS]; + struct list_head arvifs; struct list_head peers; struct ath10k_peer *peer_map[ATH10K_MAX_NUM_PEER_IDS]; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 7675858f069b..9c4bf2fdbc0f 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4732,13 +4732,14 @@ static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw, { struct ath10k *ar = hw->priv; int ret; - u8 ac; + u8 ac = txq->ac; ath10k_htt_tx_txq_update(hw, txq); if (ar->htt.tx_q_state.mode != HTT_TX_MODE_SWITCH_PUSH) return; - ac = txq->ac; + spin_lock_bh(&ar->queue_lock[ac]); + ieee80211_txq_schedule_start(hw, ac); txq = ieee80211_next_txq(hw, ac); if (!txq) @@ -4753,6 +4754,7 @@ static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw, ath10k_htt_tx_txq_update(hw, txq); out: ieee80211_txq_schedule_end(hw, ac); + spin_unlock_bh(&ar->queue_lock[ac]); } /* Must not be called with conf_mutex held as workers can use that also. */ -- 2.40.0

1 year, 7 months

2
1
0 0

[PATCH] ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530

by Hans de Goede

Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530. This was intended to help users of the (unsupported) Nvidia binary driver, but this has been reported to cause backlight control issues for users who have the gfx configured in hybrid (dual-GPU) mode, so drop this. The Nvidia binary driver should call acpi_video_register_backlight() when necessary and this has been reported to Nvidia. Until this is fixed Nvidia binary driver users can work around this by passing "acpi_backlight=video" on the kernel commandline (with the latest 6.1.y or newer stable series, kernels < 6.1.y don't need this). Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530") Reported-by: Русев Путин <rockeraliexpress(a)gmail.com> Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRr… Cc: stable(a)vger.kernel.org Cc: Daniel Dadap <ddadap(a)nvidia.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- drivers/acpi/video_detect.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 69ef2d9710c2..bcc25d457581 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -293,20 +293,6 @@ static const struct dmi_system_id video_detect_dmi_table[] = { }, }, - /* - * Older models with nvidia GPU which need acpi_video backlight - * control and where the old nvidia binary driver series does not - * call acpi_video_register_backlight(). - */ - { - .callback = video_detect_force_video, - /* ThinkPad W530 */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W530"), - }, - }, - /* * These models have a working acpi_video backlight control, and using * native backlight causes a regression where backlight does not work -- 2.39.2

1 year, 7 months

2
1
0 0

[PATCH v2 1/8] drm: Disable the cursor plane on atomic contexts with virtualized drivers

by Zack Rusin

From: Zack Rusin <zackr(a)vmware.com> Cursor planes on virtualized drivers have special meaning and require that the clients handle them in specific ways, e.g. the cursor plane should react to the mouse movement the way a mouse cursor would be expected to and the client is required to set hotspot properties on it in order for the mouse events to be routed correctly. This breaks the contract as specified by the "universal planes". Fix it by disabling the cursor planes on virtualized drivers while adding a foundation on top of which it's possible to special case mouse cursor planes for clients that want it. Disabling the cursor planes makes some kms compositors which were broken, e.g. Weston, fallback to software cursor which works fine or at least better than currently while having no effect on others, e.g. gnome-shell or kwin, which put virtualized drivers on a deny-list when running in atomic context to make them fallback to legacy kms and avoid this issue. Signed-off-by: Zack Rusin <zackr(a)vmware.com> Fixes: 681e7ec73044 ("drm: Allow userspace to ask for universal plane list (v2)") Cc: <stable(a)vger.kernel.org> # v5.4+ Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Thomas Zimmermann <tzimmermann(a)suse.de> Cc: David Airlie <airlied(a)linux.ie> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: Dave Airlie <airlied(a)redhat.com> Cc: Gerd Hoffmann <kraxel(a)redhat.com> Cc: Hans de Goede <hdegoede(a)redhat.com> Cc: Gurchetan Singh <gurchetansingh(a)chromium.org> Cc: Chia-I Wu <olvaffe(a)gmail.com> Cc: dri-devel(a)lists.freedesktop.org Cc: virtualization(a)lists.linux-foundation.org Cc: spice-devel(a)lists.freedesktop.org --- drivers/gpu/drm/drm_plane.c | 11 +++++++++++ drivers/gpu/drm/qxl/qxl_drv.c | 2 +- drivers/gpu/drm/vboxvideo/vbox_drv.c | 2 +- drivers/gpu/drm/virtio/virtgpu_drv.c | 3 ++- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- include/drm/drm_drv.h | 10 ++++++++++ include/drm/drm_file.h | 12 ++++++++++++ 7 files changed, 38 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c index 726f2f163c26..e1e2a65c7119 100644 --- a/drivers/gpu/drm/drm_plane.c +++ b/drivers/gpu/drm/drm_plane.c @@ -667,6 +667,17 @@ int drm_mode_getplane_res(struct drm_device *dev, void *data, !file_priv->universal_planes) continue; + /* + * Unless userspace supports virtual cursor plane + * then if we're running on virtual driver do not + * advertise cursor planes because they'll be broken + */ + if (plane->type == DRM_PLANE_TYPE_CURSOR && + drm_core_check_feature(dev, DRIVER_VIRTUAL) && + file_priv->atomic && + !file_priv->supports_virtual_cursor_plane) + continue; + if (drm_lease_held(file_priv, plane->base.id)) { if (count < plane_resp->count_planes && put_user(plane->base.id, plane_ptr + count)) diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c index 1cb6f0c224bb..0e4212e05caa 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.c +++ b/drivers/gpu/drm/qxl/qxl_drv.c @@ -281,7 +281,7 @@ static const struct drm_ioctl_desc qxl_ioctls[] = { }; static struct drm_driver qxl_driver = { - .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC | DRIVER_VIRTUAL, .dumb_create = qxl_mode_dumb_create, .dumb_map_offset = drm_gem_ttm_dumb_map_offset, diff --git a/drivers/gpu/drm/vboxvideo/vbox_drv.c b/drivers/gpu/drm/vboxvideo/vbox_drv.c index f4f2bd79a7cb..84e75bcc3384 100644 --- a/drivers/gpu/drm/vboxvideo/vbox_drv.c +++ b/drivers/gpu/drm/vboxvideo/vbox_drv.c @@ -176,7 +176,7 @@ DEFINE_DRM_GEM_FOPS(vbox_fops); static const struct drm_driver driver = { .driver_features = - DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, + DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC | DRIVER_VIRTUAL, .lastclose = drm_fb_helper_lastclose, diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.c b/drivers/gpu/drm/virtio/virtgpu_drv.c index 5f25a8d15464..3c5bb006159a 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drv.c +++ b/drivers/gpu/drm/virtio/virtgpu_drv.c @@ -198,7 +198,8 @@ MODULE_AUTHOR("Alon Levy"); DEFINE_DRM_GEM_FOPS(virtio_gpu_driver_fops); static const struct drm_driver driver = { - .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_RENDER | DRIVER_ATOMIC, + .driver_features = + DRIVER_MODESET | DRIVER_GEM | DRIVER_RENDER | DRIVER_ATOMIC | DRIVER_VIRTUAL, .open = virtio_gpu_driver_open, .postclose = virtio_gpu_driver_postclose, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 01a5b47e95f9..712f6ad0b014 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -1581,7 +1581,7 @@ static const struct file_operations vmwgfx_driver_fops = { static const struct drm_driver driver = { .driver_features = - DRIVER_MODESET | DRIVER_RENDER | DRIVER_ATOMIC | DRIVER_GEM, + DRIVER_MODESET | DRIVER_RENDER | DRIVER_ATOMIC | DRIVER_GEM | DRIVER_VIRTUAL, .ioctls = vmw_ioctls, .num_ioctls = ARRAY_SIZE(vmw_ioctls), .master_set = vmw_master_set, diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index f6159acb8856..c4cd7fc350d9 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -94,6 +94,16 @@ enum drm_driver_feature { * synchronization of command submission. */ DRIVER_SYNCOBJ_TIMELINE = BIT(6), + /** + * @DRIVER_VIRTUAL: + * + * Driver is running on top of virtual hardware. The most significant + * implication of this is a requirement of special handling of the + * cursor plane (e.g. cursor plane has to actually track the mouse + * cursor and the clients are required to set hotspot in order for + * the cursor planes to work correctly). + */ + DRIVER_VIRTUAL = BIT(7), /* IMPORTANT: Below are all the legacy flags, add new ones above. */ diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index e0a73a1e2df7..3e5c36891161 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -223,6 +223,18 @@ struct drm_file { */ bool is_master; + /** + * @supports_virtual_cursor_plane: + * + * This client is capable of handling the cursor plane with the + * restrictions imposed on it by the virtualized drivers. + * + * The implies that the cursor plane has to behave like a cursor + * i.e. track cursor movement. It also requires setting of the + * hotspot properties by the client on the cursor plane. + */ + bool supports_virtual_cursor_plane; + /** * @master: * -- 2.34.1

1 year, 7 months

6
12
0 0

[PATCH v5 0/5] Fix error propagation amongst request

by Andi Shyti

Hi, This series of two patches fixes the issue introduced in cf586021642d80 ("drm/i915/gt: Pipelined page migration") where, as reported by Matt, in a chain of requests an error is reported only if happens in the last request. However Chris noticed that without ensuring exclusivity in the locking we might end up in some deadlock. That's why patch 1 throttles for the ringspace in order to make sure that no one is holding it. Version 1 of this patch has been reviewed by matt and this version is adding Chris exclusive locking. Thanks Chris for this work. Andi Changelog ========= v4 -> v5 - add timeline locking also in the copy operation, which was forgottein in v4. - rearrange the patches in order to avoid a bisect break. v3 -> v4 - In v3 the timeline was being locked, but I forgot that also request_create() and request_add() are locking the timeline as well. The former does the locking, the latter does the unlocking. In order to avoid this extra lock/unlock, we need the "_locked" version of the said functions. v2 -> v3 - Really lock the timeline before generating all the requests until the last. v1 -> v2 - Add patch 1 for ensuring exclusive locking of the timeline - Reword git commit of patch 2. Andi Shyti (4): drm/i915/gt: Add intel_context_timeline_is_locked helper drm/i915: Create the locked version of the request create drm/i915: Create the locked version of the request add drm/i915/gt: Make sure that errors are propagated through request chains Chris Wilson (1): drm/i915: Throttle for ringspace prior to taking the timeline mutex drivers/gpu/drm/i915/gt/intel_context.c | 41 ++++++++++++++++++ drivers/gpu/drm/i915/gt/intel_context.h | 8 ++++ drivers/gpu/drm/i915/gt/intel_migrate.c | 51 +++++++++++++++++------ drivers/gpu/drm/i915/i915_request.c | 55 +++++++++++++++++++------ drivers/gpu/drm/i915/i915_request.h | 3 ++ 5 files changed, 133 insertions(+), 25 deletions(-) -- 2.39.2

1 year, 7 months

3
14
0 0

[PATCH 1/2] Bluetooth: fix debugfs registration

by Johan Hovold

Since commit ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") the debugfs interface for unconfigured controllers will be created when the controller is configured. There is however currently nothing preventing a controller from being configured multiple time (e.g. setting the device address using btmgmt) which results in failed attempts to register the already registered debugfs entries: debugfs: File 'features' in directory 'hci0' already present! debugfs: File 'manufacturer' in directory 'hci0' already present! debugfs: File 'hci_version' in directory 'hci0' already present! ... debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present! Add a controller flag to avoid trying to register the debugfs interface more than once. Fixes: ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers") Cc: stable(a)vger.kernel.org # 4.0 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- include/net/bluetooth/hci.h | 1 + net/bluetooth/hci_sync.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 400f8a7d0c3f..b8bca65bcd79 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -335,6 +335,7 @@ enum { enum { HCI_SETUP, HCI_CONFIG, + HCI_DEBUGFS_CREATED, HCI_AUTO_OFF, HCI_RFKILLED, HCI_MGMT, diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 632be1267288..a8785126df75 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -4501,6 +4501,9 @@ static int hci_init_sync(struct hci_dev *hdev) !hci_dev_test_flag(hdev, HCI_CONFIG)) return 0; + if (hci_dev_test_and_set_flag(hdev, HCI_DEBUGFS_CREATED)) + return 0; + hci_debugfs_create_common(hdev); if (lmp_bredr_capable(hdev)) -- 2.39.2

1 year, 7 months

3
4
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2023