December 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] mmc: core: Use GFP_NOIO in ACMD22" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 869d37475788b0044bec1a33335e24abaf5e8884 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120622-primarily-cobalt-84ce@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 869d37475788b0044bec1a33335e24abaf5e8884 Mon Sep 17 00:00:00 2001 From: Avri Altman <avri.altman(a)wdc.com> Date: Mon, 21 Oct 2024 18:32:27 +0300 Subject: [PATCH] mmc: core: Use GFP_NOIO in ACMD22 While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@inte… Suggested-by: Adrian Hunter <adrian.hunter(a)intel.com> Reviewed-by: Adrian Hunter <adrian.hunter(a)intel.com> Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman <avri.altman(a)wdc.com> Cc: stable(a)vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman(a)wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 04f3165cf9ae..a813fd7f39cc 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,6 +995,8 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) u32 result; __be32 *blocks; u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4; + unsigned int noio_flag; + struct mmc_request mrq = {}; struct mmc_command cmd = {}; struct mmc_data data = {}; @@ -1018,7 +1020,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) mrq.cmd = &cmd; mrq.data = &data; + noio_flag = memalloc_noio_save(); blocks = kmalloc(resp_sz, GFP_KERNEL); + memalloc_noio_restore(noio_flag); if (!blocks) return -ENOMEM;

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] mmc: core: Use GFP_NOIO in ACMD22" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 869d37475788b0044bec1a33335e24abaf5e8884 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120621-unplanted-data-7c88@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 869d37475788b0044bec1a33335e24abaf5e8884 Mon Sep 17 00:00:00 2001 From: Avri Altman <avri.altman(a)wdc.com> Date: Mon, 21 Oct 2024 18:32:27 +0300 Subject: [PATCH] mmc: core: Use GFP_NOIO in ACMD22 While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@inte… Suggested-by: Adrian Hunter <adrian.hunter(a)intel.com> Reviewed-by: Adrian Hunter <adrian.hunter(a)intel.com> Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman <avri.altman(a)wdc.com> Cc: stable(a)vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman(a)wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 04f3165cf9ae..a813fd7f39cc 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,6 +995,8 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) u32 result; __be32 *blocks; u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4; + unsigned int noio_flag; + struct mmc_request mrq = {}; struct mmc_command cmd = {}; struct mmc_data data = {}; @@ -1018,7 +1020,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) mrq.cmd = &cmd; mrq.data = &data; + noio_flag = memalloc_noio_save(); blocks = kmalloc(resp_sz, GFP_KERNEL); + memalloc_noio_restore(noio_flag); if (!blocks) return -ENOMEM;

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] mmc: core: Use GFP_NOIO in ACMD22" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 869d37475788b0044bec1a33335e24abaf5e8884 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120621-bunkhouse-paralyses-d92c@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 869d37475788b0044bec1a33335e24abaf5e8884 Mon Sep 17 00:00:00 2001 From: Avri Altman <avri.altman(a)wdc.com> Date: Mon, 21 Oct 2024 18:32:27 +0300 Subject: [PATCH] mmc: core: Use GFP_NOIO in ACMD22 While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@inte… Suggested-by: Adrian Hunter <adrian.hunter(a)intel.com> Reviewed-by: Adrian Hunter <adrian.hunter(a)intel.com> Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman <avri.altman(a)wdc.com> Cc: stable(a)vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman(a)wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 04f3165cf9ae..a813fd7f39cc 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,6 +995,8 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) u32 result; __be32 *blocks; u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4; + unsigned int noio_flag; + struct mmc_request mrq = {}; struct mmc_command cmd = {}; struct mmc_data data = {}; @@ -1018,7 +1020,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) mrq.cmd = &cmd; mrq.data = &data; + noio_flag = memalloc_noio_save(); blocks = kmalloc(resp_sz, GFP_KERNEL); + memalloc_noio_restore(noio_flag); if (!blocks) return -ENOMEM;

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] mmc: core: Use GFP_NOIO in ACMD22" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 869d37475788b0044bec1a33335e24abaf5e8884 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120619-protozoan-concept-0f8d@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 869d37475788b0044bec1a33335e24abaf5e8884 Mon Sep 17 00:00:00 2001 From: Avri Altman <avri.altman(a)wdc.com> Date: Mon, 21 Oct 2024 18:32:27 +0300 Subject: [PATCH] mmc: core: Use GFP_NOIO in ACMD22 While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@inte… Suggested-by: Adrian Hunter <adrian.hunter(a)intel.com> Reviewed-by: Adrian Hunter <adrian.hunter(a)intel.com> Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman <avri.altman(a)wdc.com> Cc: stable(a)vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman(a)wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 04f3165cf9ae..a813fd7f39cc 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,6 +995,8 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) u32 result; __be32 *blocks; u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4; + unsigned int noio_flag; + struct mmc_request mrq = {}; struct mmc_command cmd = {}; struct mmc_data data = {}; @@ -1018,7 +1020,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) mrq.cmd = &cmd; mrq.data = &data; + noio_flag = memalloc_noio_save(); blocks = kmalloc(resp_sz, GFP_KERNEL); + memalloc_noio_restore(noio_flag); if (!blocks) return -ENOMEM;

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] mmc: core: Use GFP_NOIO in ACMD22" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 869d37475788b0044bec1a33335e24abaf5e8884 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120620-bagel-outsell-7734@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 869d37475788b0044bec1a33335e24abaf5e8884 Mon Sep 17 00:00:00 2001 From: Avri Altman <avri.altman(a)wdc.com> Date: Mon, 21 Oct 2024 18:32:27 +0300 Subject: [PATCH] mmc: core: Use GFP_NOIO in ACMD22 While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@inte… Suggested-by: Adrian Hunter <adrian.hunter(a)intel.com> Reviewed-by: Adrian Hunter <adrian.hunter(a)intel.com> Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman <avri.altman(a)wdc.com> Cc: stable(a)vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman(a)wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 04f3165cf9ae..a813fd7f39cc 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,6 +995,8 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) u32 result; __be32 *blocks; u8 resp_sz = mmc_card_ult_capacity(card) ? 8 : 4; + unsigned int noio_flag; + struct mmc_request mrq = {}; struct mmc_command cmd = {}; struct mmc_data data = {}; @@ -1018,7 +1020,9 @@ static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) mrq.cmd = &cmd; mrq.data = &data; + noio_flag = memalloc_noio_save(); blocks = kmalloc(resp_sz, GFP_KERNEL); + memalloc_noio_restore(noio_flag); if (!blocks) return -ENOMEM;

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: phy: dp83869: fix status reporting for 1000base-x" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 378e8feea9a70d37a5dc1678b7ec27df21099fa5 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120630-barbed-mutual-faca@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 378e8feea9a70d37a5dc1678b7ec27df21099fa5 Mon Sep 17 00:00:00 2001 From: Romain Gantois <romain.gantois(a)bootlin.com> Date: Tue, 12 Nov 2024 15:06:08 +0100 Subject: [PATCH] net: phy: dp83869: fix status reporting for 1000base-x autonegotiation The DP83869 PHY transceiver supports converting from RGMII to 1000base-x. In this operation mode, autonegotiation can be performed, as described in IEEE802.3. The DP83869 has a set of fiber-specific registers located at offset 0xc00. When the transceiver is configured in RGMII-to-1000base-x mode, these registers are mapped onto offset 0, which should make reading the autonegotiation status transparent. However, the fiber registers at offset 0xc04 and 0xc05 follow the bit layout specified in Clause 37, and genphy_read_status() assumes a Clause 22 layout. Thus, genphy_read_status() doesn't properly read the capabilities advertised by the link partner, resulting in incorrect link parameters. Similarly, genphy_config_aneg() doesn't properly write advertised capabilities. Fix the 1000base-x autonegotiation procedure by replacing genphy_read_status() and genphy_config_aneg() with their Clause 37 equivalents. Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection") Cc: stable(a)vger.kernel.org Signed-off-by: Romain Gantois <romain.gantois(a)bootlin.com> Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@boot… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index 5f056d7db83e..b6b38caf9c0e 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -153,19 +153,32 @@ struct dp83869_private { int mode; }; +static int dp83869_config_aneg(struct phy_device *phydev) +{ + struct dp83869_private *dp83869 = phydev->priv; + + if (dp83869->mode != DP83869_RGMII_1000_BASE) + return genphy_config_aneg(phydev); + + return genphy_c37_config_aneg(phydev); +} + static int dp83869_read_status(struct phy_device *phydev) { struct dp83869_private *dp83869 = phydev->priv; + bool changed; int ret; + if (dp83869->mode == DP83869_RGMII_1000_BASE) + return genphy_c37_read_status(phydev, &changed); + ret = genphy_read_status(phydev); if (ret) return ret; - if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) { + if (dp83869->mode == DP83869_RGMII_100_BASE) { if (phydev->link) { - if (dp83869->mode == DP83869_RGMII_100_BASE) - phydev->speed = SPEED_100; + phydev->speed = SPEED_100; } else { phydev->speed = SPEED_UNKNOWN; phydev->duplex = DUPLEX_UNKNOWN; @@ -898,6 +911,7 @@ static int dp83869_phy_reset(struct phy_device *phydev) .soft_reset = dp83869_phy_reset, \ .config_intr = dp83869_config_intr, \ .handle_interrupt = dp83869_handle_interrupt, \ + .config_aneg = dp83869_config_aneg, \ .read_status = dp83869_read_status, \ .get_tunable = dp83869_get_tunable, \ .set_tunable = dp83869_set_tunable, \

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: phy: dp83869: fix status reporting for 1000base-x" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 378e8feea9a70d37a5dc1678b7ec27df21099fa5 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120629-collage-gratitude-7244@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 378e8feea9a70d37a5dc1678b7ec27df21099fa5 Mon Sep 17 00:00:00 2001 From: Romain Gantois <romain.gantois(a)bootlin.com> Date: Tue, 12 Nov 2024 15:06:08 +0100 Subject: [PATCH] net: phy: dp83869: fix status reporting for 1000base-x autonegotiation The DP83869 PHY transceiver supports converting from RGMII to 1000base-x. In this operation mode, autonegotiation can be performed, as described in IEEE802.3. The DP83869 has a set of fiber-specific registers located at offset 0xc00. When the transceiver is configured in RGMII-to-1000base-x mode, these registers are mapped onto offset 0, which should make reading the autonegotiation status transparent. However, the fiber registers at offset 0xc04 and 0xc05 follow the bit layout specified in Clause 37, and genphy_read_status() assumes a Clause 22 layout. Thus, genphy_read_status() doesn't properly read the capabilities advertised by the link partner, resulting in incorrect link parameters. Similarly, genphy_config_aneg() doesn't properly write advertised capabilities. Fix the 1000base-x autonegotiation procedure by replacing genphy_read_status() and genphy_config_aneg() with their Clause 37 equivalents. Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection") Cc: stable(a)vger.kernel.org Signed-off-by: Romain Gantois <romain.gantois(a)bootlin.com> Link: https://patch.msgid.link/20241112-dp83869-1000base-x-v3-1-36005f4ab0d9@boot… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index 5f056d7db83e..b6b38caf9c0e 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -153,19 +153,32 @@ struct dp83869_private { int mode; }; +static int dp83869_config_aneg(struct phy_device *phydev) +{ + struct dp83869_private *dp83869 = phydev->priv; + + if (dp83869->mode != DP83869_RGMII_1000_BASE) + return genphy_config_aneg(phydev); + + return genphy_c37_config_aneg(phydev); +} + static int dp83869_read_status(struct phy_device *phydev) { struct dp83869_private *dp83869 = phydev->priv; + bool changed; int ret; + if (dp83869->mode == DP83869_RGMII_1000_BASE) + return genphy_c37_read_status(phydev, &changed); + ret = genphy_read_status(phydev); if (ret) return ret; - if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) { + if (dp83869->mode == DP83869_RGMII_100_BASE) { if (phydev->link) { - if (dp83869->mode == DP83869_RGMII_100_BASE) - phydev->speed = SPEED_100; + phydev->speed = SPEED_100; } else { phydev->speed = SPEED_UNKNOWN; phydev->duplex = DUPLEX_UNKNOWN; @@ -898,6 +911,7 @@ static int dp83869_phy_reset(struct phy_device *phydev) .soft_reset = dp83869_phy_reset, \ .config_intr = dp83869_config_intr, \ .handle_interrupt = dp83869_handle_interrupt, \ + .config_aneg = dp83869_config_aneg, \ .read_status = dp83869_read_status, \ .get_tunable = dp83869_get_tunable, \ .set_tunable = dp83869_set_tunable, \

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] media: dvb-core: add missing buffer index check" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x bfe703ac0c9f42fd54ec46416146f46d9502bc8c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120601-unheard-margarine-05ff@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From bfe703ac0c9f42fd54ec46416146f46d9502bc8c Mon Sep 17 00:00:00 2001 From: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Date: Tue, 1 Oct 2024 11:01:34 +0200 Subject: [PATCH] media: dvb-core: add missing buffer index check dvb_vb2_expbuf() didn't check if the given buffer index was for a valid buffer. Add this check. Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Reported-by: Chenyuan Yang <chenyuan0y(a)gmail.com> Fixes: 7dc866df4012 ("media: dvb-core: Use vb2_get_buffer() instead of directly access to buffers array") Reviewed-by: Benjamin Gaignard <benjamin.gaignard(a)collabora.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-core/dvb_vb2.c index 192a8230c4aa..29edaaff7a5c 100644 --- a/drivers/media/dvb-core/dvb_vb2.c +++ b/drivers/media/dvb-core/dvb_vb2.c @@ -366,9 +366,15 @@ int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b) int dvb_vb2_expbuf(struct dvb_vb2_ctx *ctx, struct dmx_exportbuffer *exp) { struct vb2_queue *q = &ctx->vb_q; + struct vb2_buffer *vb2 = vb2_get_buffer(q, exp->index); int ret; - ret = vb2_core_expbuf(&ctx->vb_q, &exp->fd, q->type, q->bufs[exp->index], + if (!vb2) { + dprintk(1, "[%s] invalid buffer index\n", ctx->name); + return -EINVAL; + } + + ret = vb2_core_expbuf(&ctx->vb_q, &exp->fd, q->type, vb2, 0, exp->flags); if (ret) { dprintk(1, "[%s] index=%d errno=%d\n", ctx->name,

6 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] md/raid5: Wait sync io to finish before changing group cnt" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x fa1944bbe6220eb929e2c02e5e8706b908565711 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120641-carat-unwired-140a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From fa1944bbe6220eb929e2c02e5e8706b908565711 Mon Sep 17 00:00:00 2001 From: Xiao Ni <xni(a)redhat.com> Date: Wed, 6 Nov 2024 17:51:24 +0800 Subject: [PATCH] md/raid5: Wait sync io to finish before changing group cnt One customer reports a bug: raid5 is hung when changing thread cnt while resync is running. The stripes are all in conf->handle_list and new threads can't handle them. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removes pers->quiesce from mddev_suspend/resume. Before this patch, mddev_suspend needs to wait for all ios including sync io to finish. Now it's used to only wait normal io. Fix this by calling raid5_quiesce from raid5_store_group_thread_cnt directly to wait all sync requests to finish before changing the group cnt. Fixes: b39f35ebe86d ("md: don't quiesce in mddev_suspend()") Cc: stable(a)vger.kernel.org Signed-off-by: Xiao Ni <xni(a)redhat.com> Reviewed-by: Yu Kuai <yukuai3(a)huawei.com> Link: https://lore.kernel.org/r/20241106095124.74577-1-xni@redhat.com Signed-off-by: Song Liu <song(a)kernel.org> diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f5ac81dd21b2..f09e7677ee9f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7176,6 +7176,8 @@ raid5_store_group_thread_cnt(struct mddev *mddev, const char *page, size_t len) err = mddev_suspend_and_lock(mddev); if (err) return err; + raid5_quiesce(mddev, true); + conf = mddev->private; if (!conf) err = -ENODEV; @@ -7197,6 +7199,8 @@ raid5_store_group_thread_cnt(struct mddev *mddev, const char *page, size_t len) kfree(old_groups); } } + + raid5_quiesce(mddev, false); mddev_unlock_and_resume(mddev); return err ?: len;

6 months, 2 weeks

1
0
0 0

[PATCH v3 00/10] drm: Add DSI/DP support for Renesas r8a779h0 V4M and grey-hawk board

by Tomi Valkeinen

Add everything needed to support the DSI output on Renesas r8a779h0 (V4M) SoC, and the DP output (via sn65dsi86 DSI to DP bridge) on the Renesas grey-hawk board. Overall the DSI and the board design is almost identical to Renesas r8a779g0 and white-hawk board. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas(a)ideasonboard.com> --- Changes in v3: - Update "Write DPTSR only if there are more than one crtc" patch to "Write DPTSR only if the second source exists" - Add Laurent's Rb - Link to v2: https://lore.kernel.org/r/20241205-rcar-gh-dsi-v2-0-42471851df86@ideasonboa… Changes in v2: - Add the DT binding with a new conditional block, so that we can set only the port@0 as required - Drop port@1 from r8a779h0.dtsi (there's no port@1) - Add a new patch to write DPTSR only if num_crtcs > 1 - Drop RCAR_DU_FEATURE_NO_DPTSR (not needed anymore) - Add Cc: stable to the fix, and move it as first patch - Added the tags from reviews - Link to v1: https://lore.kernel.org/r/20241203-rcar-gh-dsi-v1-0-738ae1a95d2a@ideasonboa… --- Tomi Valkeinen (10): drm/rcar-du: dsi: Fix PHY lock bit check drm/rcar-du: Write DPTSR only if the second source exists dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779h0 dt-bindings: display: renesas,du: Add r8a779h0 clk: renesas: r8a779h0: Add display clocks drm/rcar-du: dsi: Add r8a779h0 support drm/rcar-du: Add support for r8a779h0 arm64: dts: renesas: gray-hawk-single: Fix indentation arm64: dts: renesas: r8a779h0: Add display support arm64: dts: renesas: gray-hawk-single: Add DisplayPort support .../display/bridge/renesas,dsi-csi2-tx.yaml | 1 + .../devicetree/bindings/display/renesas,du.yaml | 52 ++++++++- .../boot/dts/renesas/r8a779h0-gray-hawk-single.dts | 119 ++++++++++++++++++--- arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 73 +++++++++++++ drivers/clk/renesas/r8a779h0-cpg-mssr.c | 4 + drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++ drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 24 +++-- drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c | 4 +- .../gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h | 1 - 9 files changed, 272 insertions(+), 24 deletions(-) --- base-commit: adc218676eef25575469234709c2d87185ca223a change-id: 20241008-rcar-gh-dsi-9c01f5deeac8 Best regards, -- Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>

6 months, 2 weeks

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024