December 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] xhci: Fix control transfer error on Etron xHCI host" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 5e1c67abc9301d05130b7e267c204e7005503b33 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120245-celestial-coherent-9ce2@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5e1c67abc9301d05130b7e267c204e7005503b33 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:45 +0200 Subject: [PATCH] xhci: Fix control transfer error on Etron xHCI host Performing a stability stress test on a USB3.0 2.5G ethernet adapter results in errors like this: [ 91.441469] r8152 2-3:1.0 eth3: get_registers -71 [ 91.458659] r8152 2-3:1.0 eth3: get_registers -71 [ 91.475911] r8152 2-3:1.0 eth3: get_registers -71 [ 91.493203] r8152 2-3:1.0 eth3: get_registers -71 [ 91.510421] r8152 2-3:1.0 eth3: get_registers -71 The r8152 driver will periodically issue lots of control-IN requests to access the status of ethernet adapter hardware registers during the test. This happens when the xHCI driver enqueue a control TD (which cross over the Link TRB between two ring segments, as shown) in the endpoint zero's transfer ring. Seems the Etron xHCI host can not perform this TD correctly, causing the USB transfer error occurred, maybe the upper driver retry that control-IN request can solve problem, but not all drivers do this. | | ------- | TRB | Setup Stage ------- | TRB | Link ------- ------- | TRB | Data Stage ------- | TRB | Status Stage ------- | | To work around this, the xHCI driver should enqueue a No Op TRB if next available TRB is the Link TRB in the ring segment, this can prevent the Setup and Data Stage TRB to be breaked by the Link TRB. Check if the XHCI_ETRON_HOST quirk flag is set before invoking the workaround in xhci_queue_ctrl_tx(). Fixes: d0e96f5a71a0 ("USB: xhci: Control transfer support.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-20-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f62b243d0fc4..517df97ef496 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3733,6 +3733,20 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (!urb->setup_packet) return -EINVAL; + if ((xhci->quirks & XHCI_ETRON_HOST) && + urb->dev->speed >= USB_SPEED_SUPER) { + /* + * If next available TRB is the Link TRB in the ring segment then + * enqueue a No Op TRB, this can prevent the Setup and Data Stage + * TRB to be breaked by the Link TRB. + */ + if (trb_is_link(ep_ring->enqueue + 1)) { + field = TRB_TYPE(TRB_TR_NOOP) | ep_ring->cycle_state; + queue_trb(xhci, ep_ring, false, 0, 0, + TRB_INTR_TARGET(0), field); + } + } + /* 1 TRB for setup, 1 for status */ num_trbs = 2; /*

1 month, 1 week

1
0
0 0

I/ITSEC Attendee's Contact List

by Jennifer Martin

Hi, I wanted to check if you’d be interested in acquiring the attendees list of I/ITSEC: The Interservice/Industry Training, Simulation & Education Conference 2024. Date: 02 - 05 Dec 2024 Location: Orlando, USA. Registrants Counts: 17,157+ visitors. Each contact contains: Contact Name, Job Title, Company Name, Company website, Physical Address, Phone Number, and Official Email address. Let me know if you are interested to see the pricing. Regards, Jennifer Martin Sr. Marketing Manager If you do not wish to receive this newsletter reply “Not interested”

1 month, 1 week

1
0
0 0

[PATCH] ALSA: usb-audio: Add extra PID for RME Digiface USB

by Asahi Lina

It seems there is an alternate version of the hardware with a different PID. User testing reveals this still works with the same interface as far as the kernel is concerned, so just add the extra PID. Thanks to Heiko Engemann for testing with this version. Due to the way quirks-table.h is structured, that means we have to turn the entire quirk struct into a macro to avoid duplicating it... Cc: stable(a)vger.kernel.org Signed-off-by: Asahi Lina <lina(a)asahilina.net> --- sound/usb/mixer_quirks.c | 1 + sound/usb/quirks-table.h | 341 ++++++++++++++++++++++++----------------------- sound/usb/quirks.c | 2 + 3 files changed, 176 insertions(+), 168 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 6456e87e2f397478aa1d767bc27f15d7b09acb86..a95ebcf4e46e76b19ec439c4ec02f18e650f96a3 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -4059,6 +4059,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) err = snd_bbfpro_controls_create(mixer); break; case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */ + case USB_ID(0x2a39, 0x3fa0): /* RME Digiface USB (alternate) */ err = snd_rme_digiface_controls_create(mixer); break; case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 199d0603cf8e592930199097a9fa009a7b5308d8..3f8beacca27a1787987ee7eba08456eb3598231c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3616,176 +3616,181 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, -{ - /* Only claim interface 0 */ - .match_flags = USB_DEVICE_ID_MATCH_VENDOR | - USB_DEVICE_ID_MATCH_PRODUCT | - USB_DEVICE_ID_MATCH_INT_CLASS | - USB_DEVICE_ID_MATCH_INT_NUMBER, - .idVendor = 0x2a39, - .idProduct = 0x3f8c, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceNumber = 0, - QUIRK_DRIVER_INFO { - QUIRK_DATA_COMPOSITE { +#define QUIRK_RME_DIGIFACE(pid) \ +{ \ + /* Only claim interface 0 */ \ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | \ + USB_DEVICE_ID_MATCH_PRODUCT | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_NUMBER, \ + .idVendor = 0x2a39, \ + .idProduct = pid, \ + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \ + .bInterfaceNumber = 0, \ + QUIRK_DRIVER_INFO { \ + QUIRK_DATA_COMPOSITE { \ /* * Three modes depending on sample rate band, * with different channel counts for in/out - */ - { QUIRK_DATA_STANDARD_MIXER(0) }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 34, // outputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x02, - .ep_idx = 1, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_32000 | - SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000, - .rate_min = 32000, - .rate_max = 48000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 32000, 44100, 48000, - }, - .sync_ep = 0x81, - .sync_iface = 0, - .sync_altsetting = 1, - .sync_ep_idx = 0, - .implicit_fb = 1, - }, - }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 18, // outputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x02, - .ep_idx = 1, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_64000 | - SNDRV_PCM_RATE_88200 | - SNDRV_PCM_RATE_96000, - .rate_min = 64000, - .rate_max = 96000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 64000, 88200, 96000, - }, - .sync_ep = 0x81, - .sync_iface = 0, - .sync_altsetting = 1, - .sync_ep_idx = 0, - .implicit_fb = 1, - }, - }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 10, // outputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x02, - .ep_idx = 1, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_KNOT | - SNDRV_PCM_RATE_176400 | - SNDRV_PCM_RATE_192000, - .rate_min = 128000, - .rate_max = 192000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 128000, 176400, 192000, - }, - .sync_ep = 0x81, - .sync_iface = 0, - .sync_altsetting = 1, - .sync_ep_idx = 0, - .implicit_fb = 1, - }, - }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 32, // inputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x81, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_32000 | - SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000, - .rate_min = 32000, - .rate_max = 48000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 32000, 44100, 48000, - } - } - }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 16, // inputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x81, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_64000 | - SNDRV_PCM_RATE_88200 | - SNDRV_PCM_RATE_96000, - .rate_min = 64000, - .rate_max = 96000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 64000, 88200, 96000, - } - } - }, - { - QUIRK_DATA_AUDIOFORMAT(0) { - .formats = SNDRV_PCM_FMTBIT_S32_LE, - .channels = 8, // inputs - .fmt_bits = 24, - .iface = 0, - .altsetting = 1, - .altset_idx = 1, - .endpoint = 0x81, - .ep_attr = USB_ENDPOINT_XFER_ISOC | - USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_KNOT | - SNDRV_PCM_RATE_176400 | - SNDRV_PCM_RATE_192000, - .rate_min = 128000, - .rate_max = 192000, - .nr_rates = 3, - .rate_table = (unsigned int[]) { - 128000, 176400, 192000, - } - } - }, - QUIRK_COMPOSITE_END - } - } -}, + */ \ + { QUIRK_DATA_STANDARD_MIXER(0) }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 34, /* outputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x02, \ + .ep_idx = 1, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000, \ + .rate_min = 32000, \ + .rate_max = 48000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 32000, 44100, 48000, \ + }, \ + .sync_ep = 0x81, \ + .sync_iface = 0, \ + .sync_altsetting = 1, \ + .sync_ep_idx = 0, \ + .implicit_fb = 1, \ + }, \ + }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 18, /* outputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x02, \ + .ep_idx = 1, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000, \ + .rate_min = 64000, \ + .rate_max = 96000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 64000, 88200, 96000, \ + }, \ + .sync_ep = 0x81, \ + .sync_iface = 0, \ + .sync_altsetting = 1, \ + .sync_ep_idx = 0, \ + .implicit_fb = 1, \ + }, \ + }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 10, /* outputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x02, \ + .ep_idx = 1, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_KNOT | \ + SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .rate_min = 128000, \ + .rate_max = 192000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 128000, 176400, 192000, \ + }, \ + .sync_ep = 0x81, \ + .sync_iface = 0, \ + .sync_altsetting = 1, \ + .sync_ep_idx = 0, \ + .implicit_fb = 1, \ + }, \ + }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 32, /* inputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x81, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000, \ + .rate_min = 32000, \ + .rate_max = 48000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 32000, 44100, 48000, \ + } \ + } \ + }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 16, /* inputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x81, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000, \ + .rate_min = 64000, \ + .rate_max = 96000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 64000, 88200, 96000, \ + } \ + } \ + }, \ + { \ + QUIRK_DATA_AUDIOFORMAT(0) { \ + .formats = SNDRV_PCM_FMTBIT_S32_LE, \ + .channels = 8, /* inputs */ \ + .fmt_bits = 24, \ + .iface = 0, \ + .altsetting = 1, \ + .altset_idx = 1, \ + .endpoint = 0x81, \ + .ep_attr = USB_ENDPOINT_XFER_ISOC | \ + USB_ENDPOINT_SYNC_ASYNC, \ + .rates = SNDRV_PCM_RATE_KNOT | \ + SNDRV_PCM_RATE_176400 | \ + SNDRV_PCM_RATE_192000, \ + .rate_min = 128000, \ + .rate_max = 192000, \ + .nr_rates = 3, \ + .rate_table = (unsigned int[]) { \ + 128000, 176400, 192000, \ + } \ + } \ + }, \ + QUIRK_COMPOSITE_END \ + } \ + } \ +} + +QUIRK_RME_DIGIFACE(0x3f8c), +QUIRK_RME_DIGIFACE(0x3fa0), + #undef USB_DEVICE_VENDOR_SPEC #undef USB_AUDIO_DEVICE diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index c5fd180357d1e8cc4560bf03ae1ab3c12e6ee9d1..9f38288a1bede8a360abbd0296f571cdf9a72c7d 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1638,6 +1638,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, return snd_usb_motu_microbookii_boot_quirk(dev); break; case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */ + case USB_ID(0x2a39, 0x3fa0): /* RME Digiface USB (alternate) */ return snd_usb_rme_digiface_boot_quirk(dev); } @@ -1851,6 +1852,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs, mbox3_set_format_quirk(subs, fmt); /* Digidesign Mbox 3 */ break; case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */ + case USB_ID(0x2a39, 0x3fa0): /* RME Digiface USB (alternate) */ rme_digiface_set_format_quirk(subs); break; } --- base-commit: adc218676eef25575469234709c2d87185ca223a change-id: 20241202-rme-digiface-usb-id-df05cf818653 Cheers, ~~ Lina

1 month, 1 week

2
1
0 0

FAILED: patch "[PATCH] comedi: Flush partial mappings in error case" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x ce8f9fb651fac95dd41f69afe54d935420b945bd # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120212-germless-strongly-3499@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ce8f9fb651fac95dd41f69afe54d935420b945bd Mon Sep 17 00:00:00 2001 From: Jann Horn <jannh(a)google.com> Date: Thu, 17 Oct 2024 21:07:45 +0200 Subject: [PATCH] comedi: Flush partial mappings in error case If some remap_pfn_range() calls succeeded before one failed, we still have buffer pages mapped into the userspace page tables when we drop the buffer reference with comedi_buf_map_put(bm). The userspace mappings are only cleaned up later in the mmap error path. Fix it by explicitly flushing all mappings in our VMA on the error path. See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in error case"). Cc: stable(a)vger.kernel.org Fixes: ed9eccbe8970 ("Staging: add comedi core") Signed-off-by: Jann Horn <jannh(a)google.com> Link: https://lore.kernel.org/r/20241017-comedi-tlb-v3-1-16b82f9372ce@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c index 1b481731df96..b9df9b19d4bd 100644 --- a/drivers/comedi/comedi_fops.c +++ b/drivers/comedi/comedi_fops.c @@ -2407,6 +2407,18 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma) start += PAGE_SIZE; } + +#ifdef CONFIG_MMU + /* + * Leaving behind a partial mapping of a buffer we're about to + * drop is unsafe, see remap_pfn_range_notrack(). + * We need to zap the range here ourselves instead of relying + * on the automatic zapping in remap_pfn_range() because we call + * remap_pfn_range() in a loop. + */ + if (retval) + zap_vma_ptes(vma, vma->vm_start, size); +#endif } if (retval == 0) {

1 month, 1 week

1
0
0 0

FAILED: patch "[PATCH] xhci: Fix control transfer error on Etron xHCI host" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 5e1c67abc9301d05130b7e267c204e7005503b33 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120211-exit-maturely-4f37@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5e1c67abc9301d05130b7e267c204e7005503b33 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:45 +0200 Subject: [PATCH] xhci: Fix control transfer error on Etron xHCI host Performing a stability stress test on a USB3.0 2.5G ethernet adapter results in errors like this: [ 91.441469] r8152 2-3:1.0 eth3: get_registers -71 [ 91.458659] r8152 2-3:1.0 eth3: get_registers -71 [ 91.475911] r8152 2-3:1.0 eth3: get_registers -71 [ 91.493203] r8152 2-3:1.0 eth3: get_registers -71 [ 91.510421] r8152 2-3:1.0 eth3: get_registers -71 The r8152 driver will periodically issue lots of control-IN requests to access the status of ethernet adapter hardware registers during the test. This happens when the xHCI driver enqueue a control TD (which cross over the Link TRB between two ring segments, as shown) in the endpoint zero's transfer ring. Seems the Etron xHCI host can not perform this TD correctly, causing the USB transfer error occurred, maybe the upper driver retry that control-IN request can solve problem, but not all drivers do this. | | ------- | TRB | Setup Stage ------- | TRB | Link ------- ------- | TRB | Data Stage ------- | TRB | Status Stage ------- | | To work around this, the xHCI driver should enqueue a No Op TRB if next available TRB is the Link TRB in the ring segment, this can prevent the Setup and Data Stage TRB to be breaked by the Link TRB. Check if the XHCI_ETRON_HOST quirk flag is set before invoking the workaround in xhci_queue_ctrl_tx(). Fixes: d0e96f5a71a0 ("USB: xhci: Control transfer support.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-20-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f62b243d0fc4..517df97ef496 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3733,6 +3733,20 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (!urb->setup_packet) return -EINVAL; + if ((xhci->quirks & XHCI_ETRON_HOST) && + urb->dev->speed >= USB_SPEED_SUPER) { + /* + * If next available TRB is the Link TRB in the ring segment then + * enqueue a No Op TRB, this can prevent the Setup and Data Stage + * TRB to be breaked by the Link TRB. + */ + if (trb_is_link(ep_ring->enqueue + 1)) { + field = TRB_TYPE(TRB_TR_NOOP) | ep_ring->cycle_state; + queue_trb(xhci, ep_ring, false, 0, 0, + TRB_INTR_TARGET(0), field); + } + } + /* 1 TRB for setup, 1 for status */ num_trbs = 2; /*

1 month, 1 week

1
0
0 0

FAILED: patch "[PATCH] xhci: Fix control transfer error on Etron xHCI host" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 5e1c67abc9301d05130b7e267c204e7005503b33 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120210-tastiness-guru-3aba@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5e1c67abc9301d05130b7e267c204e7005503b33 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:45 +0200 Subject: [PATCH] xhci: Fix control transfer error on Etron xHCI host Performing a stability stress test on a USB3.0 2.5G ethernet adapter results in errors like this: [ 91.441469] r8152 2-3:1.0 eth3: get_registers -71 [ 91.458659] r8152 2-3:1.0 eth3: get_registers -71 [ 91.475911] r8152 2-3:1.0 eth3: get_registers -71 [ 91.493203] r8152 2-3:1.0 eth3: get_registers -71 [ 91.510421] r8152 2-3:1.0 eth3: get_registers -71 The r8152 driver will periodically issue lots of control-IN requests to access the status of ethernet adapter hardware registers during the test. This happens when the xHCI driver enqueue a control TD (which cross over the Link TRB between two ring segments, as shown) in the endpoint zero's transfer ring. Seems the Etron xHCI host can not perform this TD correctly, causing the USB transfer error occurred, maybe the upper driver retry that control-IN request can solve problem, but not all drivers do this. | | ------- | TRB | Setup Stage ------- | TRB | Link ------- ------- | TRB | Data Stage ------- | TRB | Status Stage ------- | | To work around this, the xHCI driver should enqueue a No Op TRB if next available TRB is the Link TRB in the ring segment, this can prevent the Setup and Data Stage TRB to be breaked by the Link TRB. Check if the XHCI_ETRON_HOST quirk flag is set before invoking the workaround in xhci_queue_ctrl_tx(). Fixes: d0e96f5a71a0 ("USB: xhci: Control transfer support.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-20-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f62b243d0fc4..517df97ef496 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3733,6 +3733,20 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (!urb->setup_packet) return -EINVAL; + if ((xhci->quirks & XHCI_ETRON_HOST) && + urb->dev->speed >= USB_SPEED_SUPER) { + /* + * If next available TRB is the Link TRB in the ring segment then + * enqueue a No Op TRB, this can prevent the Setup and Data Stage + * TRB to be breaked by the Link TRB. + */ + if (trb_is_link(ep_ring->enqueue + 1)) { + field = TRB_TYPE(TRB_TR_NOOP) | ep_ring->cycle_state; + queue_trb(xhci, ep_ring, false, 0, 0, + TRB_INTR_TARGET(0), field); + } + } + /* 1 TRB for setup, 1 for status */ num_trbs = 2; /*

1 month, 1 week

1
0
0 0

[PATCH] mmc: core: Further prevent card detect during shutdown

by Ulf Hansson

Disabling card detect from the host's ->shutdown_pre() callback turned out to not be the complete solution. More precisely, beyond the point when the mmc_bus->shutdown() has been called, to gracefully power off the card, we need to prevent card detect. Otherwise the mmc_rescan work may poll for the card with a CMD13, to see if it's still alive, which then will fail and hang as the card has already been powered off. To fix this problem, let's disable mmc_rescan prior to power off the card during shutdown. Reported-by: Anthony Pighin <anthony.pighin(a)nokia.com> Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown") Cc: stable(a)vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> --- drivers/mmc/core/bus.c | 2 ++ drivers/mmc/core/core.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 9283b28bc69f..1cf64e0952fb 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -149,6 +149,8 @@ static void mmc_bus_shutdown(struct device *dev) if (dev->driver && drv->shutdown) drv->shutdown(card); + __mmc_stop_host(host); + if (host->bus_ops->shutdown) { ret = host->bus_ops->shutdown(host); if (ret) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index a499f3c59de5..d996d39c0d6f 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2335,6 +2335,9 @@ void mmc_start_host(struct mmc_host *host) void __mmc_stop_host(struct mmc_host *host) { + if (host->rescan_disable) + return; + if (host->slot.cd_irq >= 0) { mmc_gpio_set_cd_wake(host, false); disable_irq(host->slot.cd_irq); -- 2.43.0

1 month, 1 week

2
3
0 0

FAILED: patch "[PATCH] xhci: Don't issue Reset Device command to Etron xHCI host" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 76d98856b1c6d06ce18f32c20527a4f9d283e660 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120230-racoon-massager-3c4c@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 76d98856b1c6d06ce18f32c20527a4f9d283e660 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:44 +0200 Subject: [PATCH] xhci: Don't issue Reset Device command to Etron xHCI host Sometimes the hub driver does not recognize the USB device connected to the external USB2.0 hub when the system resumes from S4. After the SetPortFeature(PORT_RESET) request is completed, the hub driver calls the HCD reset_device callback, which will issue a Reset Device command and free all structures associated with endpoints that were disabled. This happens when the xHCI driver issue a Reset Device command to inform the Etron xHCI host that the USB device associated with a device slot has been reset. Seems that the Etron xHCI host can not perform this command correctly, affecting the USB device. To work around this, the xHCI driver should obtain a new device slot with reference to commit 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command"), which is another way to inform the Etron xHCI host that the USB device has been reset. Add a new XHCI_ETRON_HOST quirk flag to invoke the workaround in xhci_discover_or_reset_device(). Fixes: 2a8f82c4ceaf ("USB: xhci: Notify the xHC when a device is reset.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-19-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index db3c7e738213..4b8c93e59d6d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -396,6 +396,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_ETRON && (pdev->device == PCI_DEVICE_ID_EJ168 || pdev->device == PCI_DEVICE_ID_EJ188)) { + xhci->quirks |= XHCI_ETRON_HOST; xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_BROKEN_STREAMS; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa8c877f47ac..ae16253b53fb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3733,6 +3733,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, xhci->num_active_eps); } +static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); + /* * This submits a Reset Device Command, which will set the device state to 0, * set the device address to 0, and disable all the endpoints except the default @@ -3803,6 +3805,23 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, SLOT_STATE_DISABLED) return 0; + if (xhci->quirks & XHCI_ETRON_HOST) { + /* + * Obtaining a new device slot to inform the xHCI host that + * the USB device has been reset. + */ + ret = xhci_disable_slot(xhci, udev->slot_id); + xhci_free_virt_device(xhci, udev->slot_id); + if (!ret) { + ret = xhci_alloc_dev(hcd, udev); + if (ret == 1) + ret = 0; + else + ret = -EINVAL; + } + return ret; + } + trace_xhci_discover_or_reset_device(slot_ctx); xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d3b250c736b8..a0204e10486d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1631,6 +1631,7 @@ struct xhci_hcd { #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) +#define XHCI_ETRON_HOST BIT_ULL(49) unsigned int num_active_eps; unsigned int limit_active_eps;

1 month, 1 week

1
0
0 0

FAILED: patch "[PATCH] xhci: Don't issue Reset Device command to Etron xHCI host" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 76d98856b1c6d06ce18f32c20527a4f9d283e660 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120229-papaya-corned-f071@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 76d98856b1c6d06ce18f32c20527a4f9d283e660 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:44 +0200 Subject: [PATCH] xhci: Don't issue Reset Device command to Etron xHCI host Sometimes the hub driver does not recognize the USB device connected to the external USB2.0 hub when the system resumes from S4. After the SetPortFeature(PORT_RESET) request is completed, the hub driver calls the HCD reset_device callback, which will issue a Reset Device command and free all structures associated with endpoints that were disabled. This happens when the xHCI driver issue a Reset Device command to inform the Etron xHCI host that the USB device associated with a device slot has been reset. Seems that the Etron xHCI host can not perform this command correctly, affecting the USB device. To work around this, the xHCI driver should obtain a new device slot with reference to commit 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command"), which is another way to inform the Etron xHCI host that the USB device has been reset. Add a new XHCI_ETRON_HOST quirk flag to invoke the workaround in xhci_discover_or_reset_device(). Fixes: 2a8f82c4ceaf ("USB: xhci: Notify the xHC when a device is reset.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-19-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index db3c7e738213..4b8c93e59d6d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -396,6 +396,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_ETRON && (pdev->device == PCI_DEVICE_ID_EJ168 || pdev->device == PCI_DEVICE_ID_EJ188)) { + xhci->quirks |= XHCI_ETRON_HOST; xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_BROKEN_STREAMS; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa8c877f47ac..ae16253b53fb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3733,6 +3733,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, xhci->num_active_eps); } +static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); + /* * This submits a Reset Device Command, which will set the device state to 0, * set the device address to 0, and disable all the endpoints except the default @@ -3803,6 +3805,23 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, SLOT_STATE_DISABLED) return 0; + if (xhci->quirks & XHCI_ETRON_HOST) { + /* + * Obtaining a new device slot to inform the xHCI host that + * the USB device has been reset. + */ + ret = xhci_disable_slot(xhci, udev->slot_id); + xhci_free_virt_device(xhci, udev->slot_id); + if (!ret) { + ret = xhci_alloc_dev(hcd, udev); + if (ret == 1) + ret = 0; + else + ret = -EINVAL; + } + return ret; + } + trace_xhci_discover_or_reset_device(slot_ctx); xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d3b250c736b8..a0204e10486d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1631,6 +1631,7 @@ struct xhci_hcd { #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) +#define XHCI_ETRON_HOST BIT_ULL(49) unsigned int num_active_eps; unsigned int limit_active_eps;

1 month, 1 week

1
0
0 0

FAILED: patch "[PATCH] xhci: Don't issue Reset Device command to Etron xHCI host" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 76d98856b1c6d06ce18f32c20527a4f9d283e660 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120228-twentieth-lung-0df0@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 76d98856b1c6d06ce18f32c20527a4f9d283e660 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang <ki.chiang65(a)gmail.com> Date: Wed, 6 Nov 2024 12:14:44 +0200 Subject: [PATCH] xhci: Don't issue Reset Device command to Etron xHCI host Sometimes the hub driver does not recognize the USB device connected to the external USB2.0 hub when the system resumes from S4. After the SetPortFeature(PORT_RESET) request is completed, the hub driver calls the HCD reset_device callback, which will issue a Reset Device command and free all structures associated with endpoints that were disabled. This happens when the xHCI driver issue a Reset Device command to inform the Etron xHCI host that the USB device associated with a device slot has been reset. Seems that the Etron xHCI host can not perform this command correctly, affecting the USB device. To work around this, the xHCI driver should obtain a new device slot with reference to commit 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command"), which is another way to inform the Etron xHCI host that the USB device has been reset. Add a new XHCI_ETRON_HOST quirk flag to invoke the workaround in xhci_discover_or_reset_device(). Fixes: 2a8f82c4ceaf ("USB: xhci: Notify the xHC when a device is reset.") Cc: stable(a)vger.kernel.org Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20241106101459.775897-19-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index db3c7e738213..4b8c93e59d6d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -396,6 +396,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_ETRON && (pdev->device == PCI_DEVICE_ID_EJ168 || pdev->device == PCI_DEVICE_ID_EJ188)) { + xhci->quirks |= XHCI_ETRON_HOST; xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_BROKEN_STREAMS; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index aa8c877f47ac..ae16253b53fb 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3733,6 +3733,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, xhci->num_active_eps); } +static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); + /* * This submits a Reset Device Command, which will set the device state to 0, * set the device address to 0, and disable all the endpoints except the default @@ -3803,6 +3805,23 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, SLOT_STATE_DISABLED) return 0; + if (xhci->quirks & XHCI_ETRON_HOST) { + /* + * Obtaining a new device slot to inform the xHCI host that + * the USB device has been reset. + */ + ret = xhci_disable_slot(xhci, udev->slot_id); + xhci_free_virt_device(xhci, udev->slot_id); + if (!ret) { + ret = xhci_alloc_dev(hcd, udev); + if (ret == 1) + ret = 0; + else + ret = -EINVAL; + } + return ret; + } + trace_xhci_discover_or_reset_device(slot_ctx); xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d3b250c736b8..a0204e10486d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1631,6 +1631,7 @@ struct xhci_hcd { #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) +#define XHCI_ETRON_HOST BIT_ULL(49) unsigned int num_active_eps; unsigned int limit_active_eps;

1 month, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024