December 2024 - Linux-stable-mirror

[PATCH v5 0/7] drm: Add DSI/DP support for Renesas r8a779h0 V4M and grey-hawk board

by Tomi Valkeinen

Add everything needed to support the DSI output on Renesas r8a779h0 (V4M) SoC, and the DP output (via sn65dsi86 DSI to DP bridge) on the Renesas grey-hawk board. Overall the DSI and the board design is almost identical to Renesas r8a779g0 and white-hawk board. Note: the v4 no longer has the dts and the clk patches, as those have been merged to renesas-devel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas(a)ideasonboard.com> --- Changes in v5: - Add minItems/maxItems to the top level cmms & vsps properties - Drop "minItems: 1" when not needed - Link to v4: https://lore.kernel.org/r/20241213-rcar-gh-dsi-v4-0-f8e41425207b@ideasonboa… Changes in v4: - Dropped patches merged to renesas-devel - Added new patch "dt-bindings: display: renesas,du: Add missing maxItems" to fix the bindings - Add the missing maxItems to "dt-bindings: display: renesas,du: Add r8a779h0" - Link to v3: https://lore.kernel.org/r/20241206-rcar-gh-dsi-v3-0-d74c2166fa15@ideasonboa… Changes in v3: - Update "Write DPTSR only if there are more than one crtc" patch to "Write DPTSR only if the second source exists" - Add Laurent's Rb - Link to v2: https://lore.kernel.org/r/20241205-rcar-gh-dsi-v2-0-42471851df86@ideasonboa… Changes in v2: - Add the DT binding with a new conditional block, so that we can set only the port@0 as required - Drop port@1 from r8a779h0.dtsi (there's no port@1) - Add a new patch to write DPTSR only if num_crtcs > 1 - Drop RCAR_DU_FEATURE_NO_DPTSR (not needed anymore) - Add Cc: stable to the fix, and move it as first patch - Added the tags from reviews - Link to v1: https://lore.kernel.org/r/20241203-rcar-gh-dsi-v1-0-738ae1a95d2a@ideasonboa… --- Tomi Valkeinen (7): drm/rcar-du: dsi: Fix PHY lock bit check drm/rcar-du: Write DPTSR only if the second source exists dt-bindings: display: renesas,du: Add missing constraints dt-bindings: display: renesas,du: Add r8a779h0 dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779h0 drm/rcar-du: dsi: Add r8a779h0 support drm/rcar-du: Add support for r8a779h0 .../display/bridge/renesas,dsi-csi2-tx.yaml | 1 + .../devicetree/bindings/display/renesas,du.yaml | 67 ++++++++++++++++++++-- drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++ drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 24 ++++++-- drivers/gpu/drm/renesas/rcar-du/rcar_mipi_dsi.c | 4 +- .../gpu/drm/renesas/rcar-du/rcar_mipi_dsi_regs.h | 1 - 6 files changed, 102 insertions(+), 13 deletions(-) --- base-commit: adc218676eef25575469234709c2d87185ca223a change-id: 20241008-rcar-gh-dsi-9c01f5deeac8 Best regards, -- Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com>

5 months

3
6
0 0

[PATCH v4 1/3] Drivers: hv: vmbus: Disable Suspend-to-Idle for VMBus

by Erni Sri Satya Vennela

This change is specific to Hyper-V VM user. If the Virtual Machine Connection window is focused, a Hyper-V VM user can unintentionally touch the keyboard/mouse when the VM is hibernating or resuming, and consequently the hibernation or resume operation can be aborted unexpectedly. Fix the issue by no longer registering the keyboard/mouse as wakeup devices (see the other two patches for the changes to drivers/input/serio/hyperv-keyboard.c and drivers/hid/hid-hyperv.c). The keyboard/mouse were registered as wakeup devices because the VM needs to be woken up from the Suspend-to-Idle state after a user runs "echo freeze > /sys/power/state". It seems like the Suspend-to-Idle feature has no real users in practice, so let's no longer support that by returning -EOPNOTSUPP if a user tries to use that. Fixes: 1a06d017fb3f ("Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM") Cc: stable(a)vger.kernel.org Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com> Signed-off-by: Erni Sri Satya Vennela <ernis(a)linux.microsoft.com>> --- Changes in v4: * No change Changes in v3: * Add "Cc: stable(a)vger.kernel.org" in sign-off area. Changes in v2: * Add "#define vmbus_freeze NULL" when CONFIG_PM_SLEEP is not enabled. --- drivers/hv/vmbus_drv.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 6d89d37b069a..4df6b12bf6a1 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -900,6 +900,19 @@ static void vmbus_shutdown(struct device *child_device) } #ifdef CONFIG_PM_SLEEP +/* + * vmbus_freeze - Suspend-to-Idle + */ +static int vmbus_freeze(struct device *child_device) +{ +/* + * Do not support Suspend-to-Idle ("echo freeze > /sys/power/state") as + * that would require registering the Hyper-V synthetic mouse/keyboard + * devices as wakeup devices, which can abort hibernation/resume unexpectedly. + */ + return -EOPNOTSUPP; +} + /* * vmbus_suspend - Suspend a vmbus device */ @@ -938,6 +951,7 @@ static int vmbus_resume(struct device *child_device) return drv->resume(dev); } #else +#define vmbus_freeze NULL #define vmbus_suspend NULL #define vmbus_resume NULL #endif /* CONFIG_PM_SLEEP */ @@ -969,7 +983,7 @@ static void vmbus_device_release(struct device *device) */ static const struct dev_pm_ops vmbus_pm = { - .suspend_noirq = NULL, + .suspend_noirq = vmbus_freeze, .resume_noirq = NULL, .freeze_noirq = vmbus_suspend, .thaw_noirq = vmbus_resume, -- 2.34.1

5 months, 1 week

3
3
0 0

[PATCH RESEND] drm/komeda: Add check for komeda_get_layer_fourcc_list()

by Haoxiang Li

Add check for the return value of komeda_get_layer_fourcc_list() to catch the potential exception. Fixes: 5d51f6c0da1b ("drm/komeda: Add writeback support") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c index ebccb74306a7..f30b3d5eeca5 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c @@ -160,6 +160,10 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms, formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl, kwb_conn->wb_layer->layer_type, &n_formats); + if (!formats) { + kfree(kwb_conn); + return -ENOMEM; + } err = drm_writeback_connector_init(&kms->base, wb_conn, &komeda_wb_connector_funcs, -- 2.25.1

5 months, 1 week

2
1
0 0

FAILED: patch "[PATCH] vmalloc: fix accounting with i915" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x a2e740e216f5bf49ccb83b6d490c72a340558a43 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024122301-uncommon-enquirer-5f71@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a2e740e216f5bf49ccb83b6d490c72a340558a43 Mon Sep 17 00:00:00 2001 From: "Matthew Wilcox (Oracle)" <willy(a)infradead.org> Date: Wed, 11 Dec 2024 20:25:37 +0000 Subject: [PATCH] vmalloc: fix accounting with i915 If the caller of vmap() specifies VM_MAP_PUT_PAGES (currently only the i915 driver), we will decrement nr_vmalloc_pages and MEMCG_VMALLOC in vfree(). These counters are incremented by vmalloc() but not by vmap() so this will cause an underflow. Check the VM_MAP_PUT_PAGES flag before decrementing either counter. Link: https://lkml.kernel.org/r/20241211202538.168311-1-willy@infradead.org Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap") Signed-off-by: Matthew Wilcox (Oracle) <willy(a)infradead.org> Acked-by: Johannes Weiner <hannes(a)cmpxchg.org> Reviewed-by: Shakeel Butt <shakeel.butt(a)linux.dev> Reviewed-by: Balbir Singh <balbirs(a)nvidia.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Muchun Song <muchun.song(a)linux.dev> Cc: Roman Gushchin <roman.gushchin(a)linux.dev> Cc: "Uladzislau Rezki (Sony)" <urezki(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/mm/vmalloc.c b/mm/vmalloc.c index f009b21705c1..5c88d0e90c20 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -3374,7 +3374,8 @@ void vfree(const void *addr) struct page *page = vm->pages[i]; BUG_ON(!page); - mod_memcg_page_state(page, MEMCG_VMALLOC, -1); + if (!(vm->flags & VM_MAP_PUT_PAGES)) + mod_memcg_page_state(page, MEMCG_VMALLOC, -1); /* * High-order allocs for huge vmallocs are split, so * can be freed as an array of order-0 allocations @@ -3382,7 +3383,8 @@ void vfree(const void *addr) __free_page(page); cond_resched(); } - atomic_long_sub(vm->nr_pages, &nr_vmalloc_pages); + if (!(vm->flags & VM_MAP_PUT_PAGES)) + atomic_long_sub(vm->nr_pages, &nr_vmalloc_pages); kvfree(vm->pages); kfree(vm); }

5 months, 1 week

3
3
0 0

[PATCH] usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind retries

by Selvarasu Ganesan

The current implementation sets the wMaxPacketSize of bulk in/out endpoints to 1024 bytes at the end of the f_midi_bind function. However, in cases where there is a failure in the first midi bind attempt, consider rebinding. This scenario may encounter an f_midi_bind issue due to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024 bytes, which exceeds the ep->maxpacket_limit where configured TX/RX FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS speed only. This commit addresses this issue by resetting the wMaxPacketSize before endpoint claim. Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation") Cc: stable(a)vger.kernel.org Signed-off-by: Selvarasu Ganesan <selvarasu.g(a)samsung.com> --- drivers/usb/gadget/function/f_midi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 837fcdfa3840..5caa0e4eb07e 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -907,6 +907,15 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f) status = -ENODEV; + /* + * Reset wMaxPacketSize with maximum packet size of FS bulk transfer before + * endpoint claim. This ensures that the wMaxPacketSize does not exceed the + * limit during bind retries where configured TX/RX FIFO's maxpacket size + * of 512 bytes for IN/OUT endpoints in support HS speed only. + */ + bulk_in_desc.wMaxPacketSize = cpu_to_le16(64); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(64); + /* allocate instance-specific endpoints */ midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); if (!midi->in_ep) -- 2.17.1

5 months, 2 weeks

3
17
0 0

[PATCH 6.6] KVM: x86: Make x2APIC ID 100% readonly

by Gavin Guo

From: Sean Christopherson <seanjc(a)google.com> [ Upstream commit 4b7c3f6d04bd53f2e5b228b6821fb8f5d1ba3071 ] Ignore the userspace provided x2APIC ID when fixing up APIC state for KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit a92e2543d6a8 ("KVM: x86: use hardware-compatible format for APIC ID register"), which added the fixup, didn't intend to allow userspace to modify the x2APIC ID. In fact, that commit is when KVM first started treating the x2APIC ID as readonly, apparently to fix some race: static inline u32 kvm_apic_id(struct kvm_lapic *apic) { - return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff; + /* To avoid a race between apic_base and following APIC_ID update when + * switching to x2apic_mode, the x2apic mode returns initial x2apic id. + */ + if (apic_x2apic_mode(apic)) + return apic->vcpu->vcpu_id; + + return kvm_lapic_get_reg(apic, APIC_ID) >> 24; } Furthermore, KVM doesn't support delivering interrupts to vCPUs with a modified x2APIC ID, but KVM *does* return the modified value on a guest RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually work with a modified x2APIC ID. Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map calculation, which expects the LDR to align with the x2APIC ID. WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm] CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014 RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm] Call Trace: <TASK> kvm_apic_set_state+0x1cf/0x5b0 [kvm] kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm] kvm_vcpu_ioctl+0x663/0x8a0 [kvm] __x64_sys_ioctl+0xb8/0xf0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fade8b9dd6f Unfortunately, the WARN can still trigger for other CPUs than the current one by racing against KVM_SET_LAPIC, so remove it completely. Reported-by: Michal Luczaj <mhal(a)rbox.co> Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co Reported-by: Haoyu Wu <haoyuwu254(a)gmail.com> Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com Reported-by: syzbot+545f1326f405db4e1c3e(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com Signed-off-by: Sean Christopherson <seanjc(a)google.com> Message-ID: <20240802202941.344889-2-seanjc(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Gavin Guo <gavinguo(a)igalia.com> --- arch/x86/kvm/lapic.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 34766abbabd8..cd9c1e1f6fd3 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -338,10 +338,8 @@ static void kvm_recalculate_logical_map(struct kvm_apic_map *new, * reversing the LDR calculation to get cluster of APICs, i.e. no * additional work is required. */ - if (apic_x2apic_mode(apic)) { - WARN_ON_ONCE(ldr != kvm_apic_calc_x2apic_ldr(kvm_x2apic_id(apic))); + if (apic_x2apic_mode(apic)) return; - } if (WARN_ON_ONCE(!kvm_apic_map_get_logical_dest(new, ldr, &cluster, &mask))) { @@ -2964,18 +2962,28 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s, bool set) { if (apic_x2apic_mode(vcpu->arch.apic)) { + u32 x2apic_id = kvm_x2apic_id(vcpu->arch.apic); u32 *id = (u32 *)(s->regs + APIC_ID); u32 *ldr = (u32 *)(s->regs + APIC_LDR); u64 icr; if (vcpu->kvm->arch.x2apic_format) { - if (*id != vcpu->vcpu_id) + if (*id != x2apic_id) return -EINVAL; } else { + /* + * Ignore the userspace value when setting APIC state. + * KVM's model is that the x2APIC ID is readonly, e.g. + * KVM only supports delivering interrupts to KVM's + * version of the x2APIC ID. However, for backwards + * compatibility, don't reject attempts to set a + * mismatched ID for userspace that hasn't opted into + * x2apic_format. + */ if (set) - *id >>= 24; + *id = x2apic_id; else - *id <<= 24; + *id = x2apic_id << 24; } /* @@ -2984,7 +2992,7 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu, * split to ICR+ICR2 in userspace for backwards compatibility. */ if (set) { - *ldr = kvm_apic_calc_x2apic_ldr(*id); + *ldr = kvm_apic_calc_x2apic_ldr(x2apic_id); icr = __kvm_lapic_get_reg(s->regs, APIC_ICR) | (u64)__kvm_lapic_get_reg(s->regs, APIC_ICR2) << 32; -- 2.43.0

5 months, 2 weeks

3
5
0 0

[REGRESSION] Distorted sound on Acer Aspire A115-31 laptop

by Evgeny Kapun

I am using an Acer Aspire A115-31 laptop. When running newer kernel versions, sound played through headphones is distorted, but when running older versions, it is not. Kernel version: Linux version 6.12.5 (user@hostname) (gcc (Debian 14.2.0-8) 14.2.0, GNU ld (GNU Binutils for Debian) 2.43.50.20241210) #1 SMP PREEMPT_DYNAMIC Sun Dec 15 05:09:16 IST 2024 Operating System: Debian GNU/Linux trixie/sid No special actions are needed to reproduce the issue. The sound is distorted all the time, and it doesn't depend on anything besides using an affected kernel version. It seems to be caused by commit 34ab5bbc6e82214d7f7393eba26d164b303ebb4e (ALSA: hda/realtek - Add Headset Mic supported Acer NB platform). Indeed, if I remove the entry that this commit adds, the issue disappears. lspci output for the device in question: 00:0e.0 Multimedia audio controller [0401]: Intel Corporation Celeron/Pentium Silver Processor High Definition Audio [8086:3198] (rev 06) Subsystem: Acer Incorporated [ALI] Device [1025:1360] Flags: bus master, fast devsel, latency 0, IRQ 130 Memory at a1214000 (64-bit, non-prefetchable) [size=16K] Memory at a1000000 (64-bit, non-prefetchable) [size=1M] Capabilities: [50] Power Management version 3 Capabilities: [80] Vendor Specific Information: Len=14 <?> Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, IntMsgNum 0 Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_avs, snd_sof_pci_intel_apl

5 months, 2 weeks

3
15
0 0

[PATCH v2] mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()

by Uros Bizjak

struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable, so it should not be annotated with __percpu annotation. Remove invalid __percpu annotation to fix several zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces) zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata zynqmp-ipi-mailbox.c:920:15: got void * zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces) zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu * ... and several drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression ... sparse warnings. There were no changes in the resulting object file. Cc: stable(a)vger.kernel.org Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI") Signed-off-by: Uros Bizjak <ubizjak(a)gmail.com> Cc: Jassi Brar <jassisinghbrar(a)gmail.com> Cc: Michal Simek <michal.simek(a)amd.com> Cc: Tanmay Shah <tanmay.shah(a)amd.com> --- v2: - Fix typo in commit message - Add Fixes and Cc: stable. --- drivers/mailbox/zynqmp-ipi-mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index aa5249da59b2..0c143beaafda 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -905,7 +905,7 @@ static int zynqmp_ipi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *nc, *np = pdev->dev.of_node; - struct zynqmp_ipi_pdata __percpu *pdata; + struct zynqmp_ipi_pdata *pdata; struct of_phandle_args out_irq; struct zynqmp_ipi_mbox *mbox; int num_mboxes, ret = -EINVAL; -- 2.42.0

5 months, 2 weeks

3
4
0 0

[PATCH v2 7/7] ima: Reset IMA_NONACTION_RULE_FLAGS after post_setattr

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> Commit 11c60f23ed13 ("integrity: Remove unused macro IMA_ACTION_RULE_FLAGS") removed the IMA_ACTION_RULE_FLAGS mask, due to it not being used after commit 0d73a55208e9 ("ima: re-introduce own integrity cache lock"). However, it seems that the latter commit mistakenly used the wrong mask when moving the code from ima_inode_post_setattr() to process_measurement(). There is no mention in the commit message about this change and it looks quite important, since changing from IMA_ACTIONS_FLAGS (later renamed to IMA_NONACTION_FLAGS) to IMA_ACTION_RULE_FLAGS was done by commit 42a4c603198f0 ("ima: fix ima_inode_post_setattr"). Restore the original change, but with new mask 0xfb000000 since the policy-specific flags changed meanwhile, and rename IMA_ACTION_RULE_FLAGS to IMA_NONACTION_RULE_FLAGS, to be consistent with IMA_NONACTION_FLAGS. Cc: stable(a)vger.kernel.org # v4.16.x Fixes: 11c60f23ed13 ("integrity: Remove unused macro IMA_ACTION_RULE_FLAGS") Signed-off-by: Roberto Sassu <roberto.sassu(a)huawei.com> --- security/integrity/ima/ima.h | 1 + security/integrity/ima/ima_main.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 22c3b87cfcac..32ffef2cc92a 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -141,6 +141,7 @@ struct ima_kexec_hdr { /* IMA iint policy rule cache flags */ #define IMA_NONACTION_FLAGS 0xff000000 +#define IMA_NONACTION_RULE_FLAGS 0xfb000000 #define IMA_DIGSIG_REQUIRED 0x01000000 #define IMA_PERMIT_DIRECTIO 0x02000000 #define IMA_NEW_FILE 0x04000000 diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 712c3a522e6c..83e467ad18d4 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -277,7 +277,7 @@ static int process_measurement(struct file *file, const struct cred *cred, /* reset appraisal flags if ima_inode_post_setattr was called */ iint->flags &= ~(IMA_APPRAISE | IMA_APPRAISED | IMA_APPRAISE_SUBMASK | IMA_APPRAISED_SUBMASK | - IMA_NONACTION_FLAGS); + IMA_NONACTION_RULE_FLAGS); /* * Re-evaulate the file if either the xattr has changed or the -- 2.47.0.118.gfd3785337b

5 months, 2 weeks

2
1
0 0

[PATCH v2 6/7] ima: Discard files opened with O_PATH

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> According to man open.2, files opened with O_PATH are not really opened. The obtained file descriptor is used to indicate a location in the filesystem tree and to perform operations that act purely at the file descriptor level. Thus, ignore open() syscalls with O_PATH, since IMA cares about file data. Cc: stable(a)vger.kernel.org # v2.6.39.x Fixes: 1abf0c718f15a ("New kind of open files - "location only".") Signed-off-by: Roberto Sassu <roberto.sassu(a)huawei.com> --- security/integrity/ima/ima_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 50b37420ea2c..712c3a522e6c 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -202,7 +202,8 @@ static void ima_file_free(struct file *file) struct inode *inode = file_inode(file); struct ima_iint_cache *iint; - if (!ima_policy_flag || !S_ISREG(inode->i_mode)) + if (!ima_policy_flag || !S_ISREG(inode->i_mode) || + (file->f_flags & O_PATH)) return; iint = ima_iint_find(inode); @@ -232,7 +233,8 @@ static int process_measurement(struct file *file, const struct cred *cred, enum hash_algo hash_algo; unsigned int allowed_algos = 0; - if (!ima_policy_flag || !S_ISREG(inode->i_mode)) + if (!ima_policy_flag || !S_ISREG(inode->i_mode) || + (file->f_flags & O_PATH)) return 0; /* Return an IMA_MEASURE, IMA_APPRAISE, IMA_AUDIT action -- 2.47.0.118.gfd3785337b

5 months, 2 weeks

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024