December 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] clocksource: Make negative motion detection more robust" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 76031d9536a076bf023bedbdb1b4317fc801dd67 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024121203-griminess-blah-4e97@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 76031d9536a076bf023bedbdb1b4317fc801dd67 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx(a)linutronix.de> Date: Tue, 3 Dec 2024 11:16:30 +0100 Subject: [PATCH] clocksource: Make negative motion detection more robust Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a 24-bit wide clocksource. It turns out that the calculated maximal idle time, which limits idle sleeps to prevent clocksource wrap arounds, is close to the point where the negative motion detection triggers. max_idle_ns: 597268854 ns negative motion tripping point: 671088640 ns If the idle wakeup is delayed beyond that point, the clocksource advances far enough to trigger the negative motion detection. This prevents the clock to advance and in the worst case the system stalls completely if the consecutive sleeps based on the stale clock are delayed as well. Cure this by calculating a more robust cut-off value for negative motion, which covers 87.5% of the actual clocksource counter width. Compare the delta against this value to catch negative motion. This is specifically for clock sources with a small counter width as their wrap around time is close to the half counter width. For clock sources with wide counters this is not a problem because the maximum idle time is far from the half counter width due to the math overflow protection constraints. For the case at hand this results in a tripping point of 1174405120ns. Note, that this cannot prevent issues when the delay exceeds the 87.5% margin, but that's not different from the previous unchecked version which allowed arbitrary time jumps. Systems with small counter width are prone to invalid results, but this problem is unlikely to be seen on real hardware. If such a system completely stalls for more than half a second, then there are other more urgent problems than the counter wrapping around. Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion") Reported-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Tested-by: Guenter Roeck <linux(a)roeck-us.net> Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.n… diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index ef1b16da6ad5..65b7c41471c3 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -49,6 +49,7 @@ struct module; * @archdata: Optional arch-specific data * @max_cycles: Maximum safe cycle value which won't overflow on * multiplication + * @max_raw_delta: Maximum safe delta value for negative motion detection * @name: Pointer to clocksource name * @list: List head for registration (internal) * @freq_khz: Clocksource frequency in khz. @@ -109,6 +110,7 @@ struct clocksource { struct arch_clocksource_data archdata; #endif u64 max_cycles; + u64 max_raw_delta; const char *name; struct list_head list; u32 freq_khz; diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index aab6472853fa..7304d7cf47f2 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -24,7 +24,7 @@ static void clocksource_enqueue(struct clocksource *cs); static noinline u64 cycles_to_nsec_safe(struct clocksource *cs, u64 start, u64 end) { - u64 delta = clocksource_delta(end, start, cs->mask); + u64 delta = clocksource_delta(end, start, cs->mask, cs->max_raw_delta); if (likely(delta < cs->max_cycles)) return clocksource_cyc2ns(delta, cs->mult, cs->shift); @@ -993,6 +993,15 @@ static inline void clocksource_update_max_deferment(struct clocksource *cs) cs->max_idle_ns = clocks_calc_max_nsecs(cs->mult, cs->shift, cs->maxadj, cs->mask, &cs->max_cycles); + + /* + * Threshold for detecting negative motion in clocksource_delta(). + * + * Allow for 0.875 of the counter width so that overly long idle + * sleeps, which go slightly over mask/2, do not trigger the + * negative motion detection. + */ + cs->max_raw_delta = (cs->mask >> 1) + (cs->mask >> 2) + (cs->mask >> 3); } static struct clocksource *clocksource_find_best(bool oneshot, bool skipcur) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 0ca85ff4fbb4..3d128825d343 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -755,7 +755,8 @@ static void timekeeping_forward_now(struct timekeeper *tk) u64 cycle_now, delta; cycle_now = tk_clock_read(&tk->tkr_mono); - delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask); + delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask, + tk->tkr_mono.clock->max_raw_delta); tk->tkr_mono.cycle_last = cycle_now; tk->tkr_raw.cycle_last = cycle_now; @@ -2230,7 +2231,8 @@ static bool timekeeping_advance(enum timekeeping_adv_mode mode) return false; offset = clocksource_delta(tk_clock_read(&tk->tkr_mono), - tk->tkr_mono.cycle_last, tk->tkr_mono.mask); + tk->tkr_mono.cycle_last, tk->tkr_mono.mask, + tk->tkr_mono.clock->max_raw_delta); /* Check if there's really nothing to do */ if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK) diff --git a/kernel/time/timekeeping_internal.h b/kernel/time/timekeeping_internal.h index 63e600e943a7..8c9079108ffb 100644 --- a/kernel/time/timekeeping_internal.h +++ b/kernel/time/timekeeping_internal.h @@ -30,15 +30,15 @@ static inline void timekeeping_inc_mg_floor_swaps(void) #endif -static inline u64 clocksource_delta(u64 now, u64 last, u64 mask) +static inline u64 clocksource_delta(u64 now, u64 last, u64 mask, u64 max_delta) { u64 ret = (now - last) & mask; /* - * Prevent time going backwards by checking the MSB of mask in - * the result. If set, return 0. + * Prevent time going backwards by checking the result against + * @max_delta. If greater, return 0. */ - return ret & ~(mask >> 1) ? 0 : ret; + return ret > max_delta ? 0 : ret; } /* Semi public for serialization of non timekeeper VDSO updates. */

1 year

4
9
0 0

Re: [PATCH v5.10.277] wifi: mac80211: Avoid address calculations via out of bounds array indexing

by Greg KH

On Mon, Oct 28, 2024 at 05:00:02PM +0530, Hardik Gohil wrote: > On Mon, Oct 21, 2024 at 3:10 PM Greg KH <gregkh(a)linuxfoundation.org> wrote: > > > > On Sat, Oct 19, 2024 at 11:06:40AM +0530, Hardik Gohil wrote: > > > From: Kenton Groombridge <concord(a)gentoo.org> > > > > > > [ Upstream commit 2663d0462eb32ae7c9b035300ab6b1523886c718 ] > > > > We can't take patches for 5.10 that are not already in 5.15. Please fix > > up and resend for ALL relevent trees. > > > > thanks, > > > > greg k-h > > I have just confirmed those are applicable to v5.15 and v5.10. > > Request to add those patches. Please send tested backports. thanks, greg k-h

1 year

3
5
0 0

[PATCH] drm/panel: st7701: Add prepare_prev_first flag to drm_panel

by Marek Vasut

The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM DSI host. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Chris Morgan <macromorgan(a)hotmail.com> Cc: David Airlie <airlied(a)gmail.com> Cc: Hironori KIKUCHI <kikuchan98(a)gmail.com> Cc: Jagan Teki <jagan(a)amarulasolutions.com> Cc: Jessica Zhang <quic_jesszhan(a)quicinc.com> Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Cc: Simona Vetter <simona(a)ffwll.ch> Cc: Thomas Zimmermann <tzimmermann(a)suse.de> Cc: dri-devel(a)lists.freedesktop.org Cc: stable(a)vger.kernel.org # v6.2+ --- Note that the prepare_prev_first flag was added in Linux 6.2.y commit 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel"), hence the CC stable v6.2+, even if the Fixes tag points to a commit in Linux 5.1.y . --- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c index eef03d04e0cd2..1f72ef7ca74c9 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c @@ -1177,6 +1177,7 @@ static int st7701_probe(struct device *dev, int connector_type) return dev_err_probe(dev, ret, "Failed to get orientation\n"); drm_panel_init(&st7701->panel, dev, &st7701_funcs, connector_type); + st7701->panel.prepare_prev_first = true; /** * Once sleep out has been issued, ST7701 IC required to wait 120ms -- 2.45.2

1 year

3
2
0 0

[PATCH v2] usb: typec: ucsi: Set orientation as none when connector is unplugged

by Abel Vesa

The current implementation of the ucsi glink client connector_status() callback is only relying on the state of the gpio. This means that even when the cable is unplugged, the orientation propagated to the switches along the graph is "orientation normal", instead of "orientation none", which would be the correct one in this case. One of the Qualcomm DP-USB PHY combo drivers, which needs to be aware of the orientation change, is relying on the "orientation none" to skip the reinitialization of the entire PHY. Since the ucsi glink client advertises "orientation normal" even when the cable is unplugged, the mentioned PHY is taken down and reinitialized when in fact it should be left as-is. This triggers a crash within the displayport controller driver in turn, which brings the whole system down on some Qualcomm platforms. Propagating "orientation none" from the ucsi glink client on the connector_status() callback hides the problem of the mentioned PHY driver away for now. But the "orientation none" is nonetheless the correct one to be used in this case. So propagate the "orientation none" instead when the connector status flags says cable is disconnected. Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback") Cc: stable(a)vger.kernel.org # 6.10 Reviewed-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Reviewed-by: Neil Armstrong <neil.armstrong(a)linaro.org> Signed-off-by: Abel Vesa <abel.vesa(a)linaro.org> --- Changes in v2: - Re-worded the commit message to explain a bit more what is happening. - Added Fixes tag and CC'ed stable. - Dropped the RFC prefix. - Used the new UCSI_CONSTAT macro which did not exist when v1 was sent. - Link to v1: https://lore.kernel.org/r/20241017-usb-typec-ucsi-glink-add-orientation-non… --- drivers/usb/typec/ucsi/ucsi_glink.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index 90948cd6d2972402465a2adaba3e1ed055cf0cfa..fed39d45809050f1e08dc1d34008b5c561461391 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -185,6 +185,11 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con) struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi); int orientation; + if (!UCSI_CONSTAT(con, CONNECTED)) { + typec_set_orientation(con->port, TYPEC_ORIENTATION_NONE); + return; + } + if (con->num > PMIC_GLINK_MAX_PORTS || !ucsi->port_orientation[con->num - 1]) return; --- base-commit: 3e42dc9229c5950e84b1ed705f94ed75ed208228 change-id: 20241017-usb-typec-ucsi-glink-add-orientation-none-73f1f2522999 Best regards, -- Abel Vesa <abel.vesa(a)linaro.org>

1 year

2
1
0 0

[PATCH] mm, compaction: don't use ALLOC_CMA in long term GUP flow

by yangge1116＠126.com

From: yangge <yangge1116(a)126.com> Since commit 984fdba6a32e ("mm, compaction: use proper alloc_flags in __compaction_suitable()") allow compaction to proceed when free pages required for compaction reside in the CMA pageblocks, it's possible that __compaction_suitable() always returns true, and in some cases, it's not acceptable. There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of memory. I have configured 16GB of CMA memory on each NUMA node, and starting a 32GB virtual machine with device passthrough is extremely slow, taking almost an hour. During the start-up of the virtual machine, it will call pin_user_pages_remote(..., FOLL_LONGTERM, ...) to allocate memory. Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB of no-CMA memory on a NUMA node can be used as virtual machine memory. Since there is 16G of free CMA memory on the NUMA node, watermark for order-0 always be met for compaction, so __compaction_suitable() always returns true, even if the node is unable to allocate non-CMA memory for the virtual machine. For costly allocations, because __compaction_suitable() always returns true, __alloc_pages_slowpath() can't exit at the appropriate place, resulting in excessively long virtual machine startup times. Call trace: __alloc_pages_slowpath if (compact_result == COMPACT_SKIPPED || compact_result == COMPACT_DEFERRED) goto nopage; // should exit __alloc_pages_slowpath() from here To sum up, during long term GUP flow, we should remove ALLOC_CMA both in __compaction_suitable() and __isolate_free_page(). Fixes: 984fdba6a32e ("mm, compaction: use proper alloc_flags in __compaction_suitable()") Cc: <stable(a)vger.kernel.org> Signed-off-by: yangge <yangge1116(a)126.com> --- mm/compaction.c | 8 +++++--- mm/page_alloc.c | 4 +++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index 07bd227..044c2247 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -2384,6 +2384,7 @@ static bool __compaction_suitable(struct zone *zone, int order, unsigned long wmark_target) { unsigned long watermark; + bool pin; /* * Watermarks for order-0 must be met for compaction to be able to * isolate free pages for migration targets. This means that the @@ -2395,14 +2396,15 @@ static bool __compaction_suitable(struct zone *zone, int order, * even if compaction succeeds. * For costly orders, we require low watermark instead of min for * compaction to proceed to increase its chances. - * ALLOC_CMA is used, as pages in CMA pageblocks are considered - * suitable migration targets + * In addition to long term GUP flow, ALLOC_CMA is used, as pages in + * CMA pageblocks are considered suitable migration targets */ watermark = (order > PAGE_ALLOC_COSTLY_ORDER) ? low_wmark_pages(zone) : min_wmark_pages(zone); watermark += compact_gap(order); + pin = !!(current->flags & PF_MEMALLOC_PIN); return __zone_watermark_ok(zone, 0, watermark, highest_zoneidx, - ALLOC_CMA, wmark_target); + pin ? 0 : ALLOC_CMA, wmark_target); } /* diff --git a/mm/page_alloc.c b/mm/page_alloc.c index dde19db..9a5dfda 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2813,6 +2813,7 @@ int __isolate_free_page(struct page *page, unsigned int order) { struct zone *zone = page_zone(page); int mt = get_pageblock_migratetype(page); + bool pin; if (!is_migrate_isolate(mt)) { unsigned long watermark; @@ -2823,7 +2824,8 @@ int __isolate_free_page(struct page *page, unsigned int order) * exists. */ watermark = zone->_watermark[WMARK_MIN] + (1UL << order); - if (!zone_watermark_ok(zone, 0, watermark, 0, ALLOC_CMA)) + pin = !!(current->flags & PF_MEMALLOC_PIN); + if (!zone_watermark_ok(zone, 0, watermark, 0, pin ? 0 : ALLOC_CMA)) return 0; } -- 2.7.4

1 year

4
4
0 0

[GIT PULL] xfs: bug fixes for 6.13

by Darrick J. Wong

Hi Carlos, Please pull this branch with changes for xfs. Christoph said that he'd rather we rebased the whole xfs for-next branch to preserve bisectability so this branch folds in his fix for !quota builds and a missing zero initialization for struct kstat in the mgtime conversion patch that the build robots just pointed out. As usual, I did a test-merge with the main upstream branch as of a few minutes ago, and didn't see any conflicts. Please let me know if you encounter any problems. --D The following changes since commit f92f4749861b06fed908d336b4dee1326003291b: Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux (2024-12-10 18:21:40 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux.git tags/xfs-6.13-fixes_2024-12-12 for you to fetch changes up to 12f2930f5f91bc0d67794c69d1961098c7c72040: xfs: port xfs_ioc_start_commit to multigrain timestamps (2024-12-12 17:45:13 -0800) ---------------------------------------------------------------- xfs: bug fixes for 6.13 [01/12] Bug fixes for 6.13. This has been running on the djcloud for months with no problems. Enjoy! Signed-off-by: "Darrick J. Wong" <djwong(a)kernel.org> ---------------------------------------------------------------- Darrick J. Wong (28): xfs: fix off-by-one error in fsmap's end_daddr usage xfs: metapath scrubber should use the already loaded inodes xfs: keep quota directory inode loaded xfs: return a 64-bit block count from xfs_btree_count_blocks xfs: don't drop errno values when we fail to ficlone the entire range xfs: separate healthy clearing mask during repair xfs: set XFS_SICK_INO_SYMLINK_ZAPPED explicitly when zapping a symlink xfs: mark metadir repair tempfiles with IRECOVERY xfs: fix null bno_hint handling in xfs_rtallocate_rtg xfs: fix error bailout in xfs_rtginode_create xfs: update btree keys correctly when _insrec splits an inode root block xfs: fix scrub tracepoints when inode-rooted btrees are involved xfs: unlock inodes when erroring out of xfs_trans_alloc_dir xfs: only run precommits once per transaction object xfs: avoid nested calls to __xfs_trans_commit xfs: don't lose solo superblock counter update transactions xfs: don't lose solo dquot update transactions xfs: separate dquot buffer reads from xfs_dqflush xfs: clean up log item accesses in xfs_qm_dqflush{,_done} xfs: attach dquot buffer to dquot log item buffer xfs: convert quotacheck to attach dquot buffers xfs: fix sb_spino_align checks for large fsblock sizes xfs: don't move nondir/nonreg temporary repair files to the metadir namespace xfs: don't crash on corrupt /quotas dirent xfs: check pre-metadir fields correctly xfs: fix zero byte checking in the superblock scrubber xfs: return from xfs_symlink_verify early on V4 filesystems xfs: port xfs_ioc_start_commit to multigrain timestamps fs/xfs/libxfs/xfs_btree.c | 33 +++++-- fs/xfs/libxfs/xfs_btree.h | 2 +- fs/xfs/libxfs/xfs_ialloc_btree.c | 4 +- fs/xfs/libxfs/xfs_rtgroup.c | 2 +- fs/xfs/libxfs/xfs_sb.c | 11 ++- fs/xfs/libxfs/xfs_symlink_remote.c | 4 +- fs/xfs/scrub/agheader.c | 77 +++++++++++---- fs/xfs/scrub/agheader_repair.c | 6 +- fs/xfs/scrub/fscounters.c | 2 +- fs/xfs/scrub/health.c | 57 ++++++----- fs/xfs/scrub/ialloc.c | 4 +- fs/xfs/scrub/metapath.c | 68 +++++-------- fs/xfs/scrub/refcount.c | 2 +- fs/xfs/scrub/scrub.h | 6 ++ fs/xfs/scrub/symlink_repair.c | 3 +- fs/xfs/scrub/tempfile.c | 22 ++++- fs/xfs/scrub/trace.h | 2 +- fs/xfs/xfs_bmap_util.c | 2 +- fs/xfs/xfs_dquot.c | 195 +++++++++++++++++++++++++++++++------ fs/xfs/xfs_dquot.h | 6 +- fs/xfs/xfs_dquot_item.c | 51 +++++++--- fs/xfs/xfs_dquot_item.h | 7 ++ fs/xfs/xfs_exchrange.c | 14 +-- fs/xfs/xfs_file.c | 8 ++ fs/xfs/xfs_fsmap.c | 38 +++++--- fs/xfs/xfs_inode.h | 2 +- fs/xfs/xfs_qm.c | 102 +++++++++++++------ fs/xfs/xfs_qm.h | 1 + fs/xfs/xfs_quota.h | 5 +- fs/xfs/xfs_rtalloc.c | 2 +- fs/xfs/xfs_trans.c | 58 ++++++----- fs/xfs/xfs_trans_ail.c | 2 +- fs/xfs/xfs_trans_dquot.c | 31 +++++- 33 files changed, 578 insertions(+), 251 deletions(-)

1 year

2
1
0 0

FAILED: patch "[PATCH] KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 54bbee190d42166209185d89070c58a343bf514b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024120223-stunner-letter-9d09@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 54bbee190d42166209185d89070c58a343bf514b Mon Sep 17 00:00:00 2001 From: Raghavendra Rao Ananta <rananta(a)google.com> Date: Tue, 19 Nov 2024 16:52:29 -0800 Subject: [PATCH] KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates to true if any counter's global enable (PMCR_EL0.E), overflow flag (PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1. Of note, this does not require a counter to be enabled (i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow. Align kvm_pmu_overflow_status() with the reality of the architecture and stop using PMCNTENSET_EL0 as part of the overflow condition. The bug was discovered while running an SBSA PMU test [*], which only sets PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt. Cc: stable(a)vger.kernel.org Fixes: 76d883c4e640 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register") Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operatin… Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> [ oliver: massaged changelog ] Reviewed-by: Marc Zyngier <maz(a)kernel.org> Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c index 8ad62284fa23..3855cc9d0ca5 100644 --- a/arch/arm64/kvm/pmu-emul.c +++ b/arch/arm64/kvm/pmu-emul.c @@ -381,7 +381,6 @@ static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu) if ((kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E)) { reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0); - reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1); }

1 year

4
8
0 0

[PATCH v2] sched/topology: Enable topology_span_sane check only for debug builds

by Saurabh Sengar

On a x86 system under test with 1780 CPUs, topology_span_sane() takes around 8 seconds cumulatively for all the iterations. It is an expensive operation which does the sanity of non-NUMA topology masks. CPU topology is not something which changes very frequently hence make this check optional for the systems where the topology is trusted and need faster bootup. Restrict this to sched_verbose kernel cmdline option so that this penalty can be avoided for the systems who wants to avoid it. Cc: stable(a)vger.kernel.org Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com> --- [V2] - Use kernel cmdline param instead of compile time flag. kernel/sched/topology.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 9748a4c8d668..4ca63bff321d 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -2363,6 +2363,13 @@ static bool topology_span_sane(struct sched_domain_topology_level *tl, { int i = cpu + 1; + /* Skip the topology sanity check for non-debug, as it is a time-consuming operatin */ + if (!sched_debug_verbose) { + pr_info_once("%s: Skipping topology span sanity check. Use `sched_verbose` boot parameter to enable it.\n", + __func__); + return true; + } + /* NUMA levels are allowed to overlap */ if (tl->flags & SDTL_OVERLAP) return true; -- 2.43.0

1 year

4
3
0 0

[PATCH 1/2] arm64: dts: mediatek: mt8183: Disable DPI display output by default

by Chen-Yu Tsai

This reverts commit 377548f05bd0905db52a1d50e5b328b9b4eb049d. Most SoC dtsi files have the display output interfaces disabled by default, and only enabled on boards that utilize them. The MT8183 has it backwards: the display outputs are left enabled by default, and only disabled at the board level. Reverse the situation for the DPI output so that it follows the normal scheme. For ease of backporting the DSI output is handled in a separate patch. Fixes: 009d855a26fd ("arm64: dts: mt8183: add dpi node to mt8183") Fixes: 377548f05bd0 ("arm64: dts: mediatek: mt8183-kukui: Disable DPI display interface") Cc: <stable(a)vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst(a)chromium.org> --- arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 5 ----- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 1 + 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 07ae3c8e897b..22924f61ec9e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -290,11 +290,6 @@ dsi_out: endpoint { }; }; -&dpi0 { - /* TODO Re-enable after DP to Type-C port muxing can be described */ - status = "disabled"; -}; - &gic { mediatek,broken-save-restore-fw; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 1afeeb1155f5..8f31fc9050ec 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1845,6 +1845,7 @@ dpi0: dpi@14015000 { <&mmsys CLK_MM_DPI_MM>, <&apmixedsys CLK_APMIXED_TVDPLL>; clock-names = "pixel", "engine", "pll"; + status = "disabled"; port { dpi_out: endpoint { }; -- 2.47.0.163.g1226f6d8fa-goog

1 year

3
5
0 0

[PATCH v10 01/15] ufs: qcom: fix crypto key eviction

by Eric Biggers

From: Eric Biggers <ebiggers(a)google.com> Commit 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") introduced an incorrect check of the algorithm ID into the key eviction path, and thus qcom_ice_evict_key() is no longer ever called. Fix it. Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") Cc: stable(a)vger.kernel.org Cc: Abel Vesa <abel.vesa(a)linaro.org> Signed-off-by: Eric Biggers <ebiggers(a)google.com> --- drivers/ufs/host/ufs-qcom.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 68040b2ab5f8..e33ae71245dd 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -153,27 +153,25 @@ static int ufs_qcom_ice_program_key(struct ufs_hba *hba, const union ufs_crypto_cfg_entry *cfg, int slot) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); union ufs_crypto_cap_entry cap; - bool config_enable = - cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE; + + if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE)) + return qcom_ice_evict_key(host->ice, slot); /* Only AES-256-XTS has been tested so far. */ cap = hba->crypto_cap_array[cfg->crypto_cap_idx]; if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS || cap.key_size != UFS_CRYPTO_KEY_SIZE_256) return -EOPNOTSUPP; - if (config_enable) - return qcom_ice_program_key(host->ice, - QCOM_ICE_CRYPTO_ALG_AES_XTS, - QCOM_ICE_CRYPTO_KEY_SIZE_256, - cfg->crypto_key, - cfg->data_unit_size, slot); - else - return qcom_ice_evict_key(host->ice, slot); + return qcom_ice_program_key(host->ice, + QCOM_ICE_CRYPTO_ALG_AES_XTS, + QCOM_ICE_CRYPTO_KEY_SIZE_256, + cfg->crypto_key, + cfg->data_unit_size, slot); } #else #define ufs_qcom_ice_program_key NULL -- 2.47.1

1 year

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024