From: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com>
[WHY]
We still had an instance of get_idle_state checking the PMFW scratch
register instead of the actual idle allow signal.
[HOW]
Replace it with the SW state check for whether we had allowed idle
through notify_idle.
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Duncan Ma <duncan.ma(a)amd.com>
Acked-by: Alex Hung <alex.hung(a)amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index daf6c7fe0906..acd8f1257ade 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -4884,22 +4884,16 @@ void dc_exit_ips_for_hw_access_internal(struct dc *dc, const char *caller_name)
bool dc_dmub_is_ips_idle_state(struct dc *dc)
{
- uint32_t idle_state = 0;
-
if (dc->debug.disable_idle_power_optimizations)
return false;
if (!dc->caps.ips_support || (dc->config.disable_ips == DMUB_IPS_DISABLE_ALL))
return false;
- if (dc->hwss.get_idle_state)
- idle_state = dc->hwss.get_idle_state(dc);
-
- if (!(idle_state & DMUB_IPS1_ALLOW_MASK) ||
- !(idle_state & DMUB_IPS2_ALLOW_MASK))
- return true;
+ if (!dc->ctx->dmub_srv)
+ return false;
- return false;
+ return dc->ctx->dmub_srv->idle_allowed;
}
/* set min and max memory clock to lowest and highest DPM level, respectively */
--
2.34.1
From: Wenjing Liu <wenjing.liu(a)amd.com>
[WHY]
When committing an update with ODM combine change when the plane is
removing or already removed, we fail to detect odm change in pipe
update flags. This has caused mismatch between new dc state and the
actual hardware state, because we missed odm programming.
[HOW]
- Detect odm change even for otg master pipe without a plane.
- Update odm config before calling program pipes for pipe with planes.
The commit also updates blank pattern programming when odm is changed
without plane. This is because number of OPP is changed when ODM
combine is changed. Blank pattern is per OPP so we will need to
reprogram OPP based on the new pipe topology.
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone(a)amd.com>
Acked-by: Alex Hung <alex.hung(a)amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu(a)amd.com>
---
.../amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 41 ++++++++++---------
.../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 7 ++++
2 files changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index c55d5155ecb9..40098d9f70cb 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -1498,6 +1498,11 @@ static void dcn20_detect_pipe_changes(struct dc_state *old_state,
return;
}
+ if (resource_is_pipe_type(new_pipe, OTG_MASTER) &&
+ resource_is_odm_topology_changed(new_pipe, old_pipe))
+ /* Detect odm changes */
+ new_pipe->update_flags.bits.odm = 1;
+
/* Exit on unchanged, unused pipe */
if (!old_pipe->plane_state && !new_pipe->plane_state)
return;
@@ -1551,10 +1556,6 @@ static void dcn20_detect_pipe_changes(struct dc_state *old_state,
/* Detect top pipe only changes */
if (resource_is_pipe_type(new_pipe, OTG_MASTER)) {
- /* Detect odm changes */
- if (resource_is_odm_topology_changed(new_pipe, old_pipe))
- new_pipe->update_flags.bits.odm = 1;
-
/* Detect global sync changes */
if (old_pipe->pipe_dlg_param.vready_offset != new_pipe->pipe_dlg_param.vready_offset
|| old_pipe->pipe_dlg_param.vstartup_start != new_pipe->pipe_dlg_param.vstartup_start
@@ -1999,19 +2000,20 @@ void dcn20_program_front_end_for_ctx(
DC_LOGGER_INIT(dc->ctx->logger);
unsigned int prev_hubp_count = 0;
unsigned int hubp_count = 0;
+ struct pipe_ctx *pipe;
if (resource_is_pipe_topology_changed(dc->current_state, context))
resource_log_pipe_topology_update(dc, context);
if (dc->hwss.program_triplebuffer != NULL && dc->debug.enable_tri_buf) {
for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+ pipe = &context->res_ctx.pipe_ctx[i];
- if (!pipe_ctx->top_pipe && !pipe_ctx->prev_odm_pipe && pipe_ctx->plane_state) {
- ASSERT(!pipe_ctx->plane_state->triplebuffer_flips);
+ if (!pipe->top_pipe && !pipe->prev_odm_pipe && pipe->plane_state) {
+ ASSERT(!pipe->plane_state->triplebuffer_flips);
/*turn off triple buffer for full update*/
dc->hwss.program_triplebuffer(
- dc, pipe_ctx, pipe_ctx->plane_state->triplebuffer_flips);
+ dc, pipe, pipe->plane_state->triplebuffer_flips);
}
}
}
@@ -2085,12 +2087,22 @@ void dcn20_program_front_end_for_ctx(
DC_LOG_DC("Reset mpcc for pipe %d\n", dc->current_state->res_ctx.pipe_ctx[i].pipe_idx);
}
+ /* update ODM for blanked OTG master pipes */
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
+ pipe = &context->res_ctx.pipe_ctx[i];
+ if (resource_is_pipe_type(pipe, OTG_MASTER) &&
+ !resource_is_pipe_type(pipe, DPP_PIPE) &&
+ pipe->update_flags.bits.odm &&
+ hws->funcs.update_odm)
+ hws->funcs.update_odm(dc, context, pipe);
+ }
+
/*
* Program all updated pipes, order matters for mpcc setup. Start with
* top pipe and program all pipes that follow in order
*/
for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
+ pipe = &context->res_ctx.pipe_ctx[i];
if (pipe->plane_state && !pipe->top_pipe) {
while (pipe) {
@@ -2129,17 +2141,6 @@ void dcn20_program_front_end_for_ctx(
context->stream_status[0].plane_count > 1) {
pipe->plane_res.hubp->funcs->hubp_wait_pipe_read_start(pipe->plane_res.hubp);
}
-
- /* when dynamic ODM is active, pipes must be reconfigured when all planes are
- * disabled, as some transitions will leave software and hardware state
- * mismatched.
- */
- if (dc->debug.enable_single_display_2to1_odm_policy &&
- pipe->stream &&
- pipe->update_flags.bits.disable &&
- !pipe->prev_odm_pipe &&
- hws->funcs.update_odm)
- hws->funcs.update_odm(dc, context, pipe);
}
}
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
index aa36d7a56ca8..b890db0bfc46 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
@@ -1156,6 +1156,13 @@ void dcn32_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx *
dsc->funcs->dsc_disconnect(dsc);
}
}
+
+ if (!resource_is_pipe_type(pipe_ctx, DPP_PIPE))
+ /*
+ * blank pattern is generated by OPP, reprogram blank pattern
+ * due to OPP count change
+ */
+ dc->hwseq->funcs.blank_pixel_data(dc, pipe_ctx, true);
}
unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsigned int *k1_div, unsigned int *k2_div)
--
2.34.1
From: Ryan Lin <tsung-hua.lin(a)amd.com>
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org # 6.5.x
Cc: Tsung-hua Lin <tsung-hua.lin(a)amd.com>
Cc: Chris Chi <moukong.chi(a)amd.com>
Reviewed-by: Wayne Lin <wayne.lin(a)amd.com>
Acked-by: Alex Hung <alex.hung(a)amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin(a)amd.com>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index 85b7f58a7f35..c27063305a13 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -67,6 +67,8 @@ static void apply_edid_quirks(struct edid *edid, struct dc_edid_caps *edid_caps)
/* Workaround for some monitors that do not clear DPCD 0x317 if FreeSync is unsupported */
case drm_edid_encode_panel_id('A', 'U', 'O', 0xA7AB):
case drm_edid_encode_panel_id('A', 'U', 'O', 0xE69B):
+ case drm_edid_encode_panel_id('B', 'O', 'E', 0x092A):
+ case drm_edid_encode_panel_id('L', 'G', 'D', 0x06D1):
DRM_DEBUG_DRIVER("Clearing DPCD 0x317 on monitor with panel id %X\n", panel_id);
edid_caps->panel_patch.remove_sink_ext_caps = true;
break;
@@ -120,6 +122,8 @@ enum dc_edid_status dm_helpers_parse_edid_caps(
edid_caps->edid_hdmi = connector->display_info.is_hdmi;
+ apply_edid_quirks(edid_buf, edid_caps);
+
sad_count = drm_edid_to_sad((struct edid *) edid->raw_edid, &sads);
if (sad_count <= 0)
return result;
@@ -146,8 +150,6 @@ enum dc_edid_status dm_helpers_parse_edid_caps(
else
edid_caps->speaker_flags = DEFAULT_SPEAKER_LOCATION;
- apply_edid_quirks(edid_buf, edid_caps);
-
kfree(sads);
kfree(sadb);
--
2.34.1
From: Josip Pavic <josip.pavic(a)amd.com>
[WHY]
It's beneficial for ABM to know when new frame data are available.
[HOW]
Add new condition to allow dirty rects to be sent to DMUB when ABM is
active. ABM will use this as a signal that a new frame has arrived.
Cc: Mario Limonciello <mario.limonciello(a)amd.com>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo(a)amd.com>
Acked-by: Alex Hung <alex.hung(a)amd.com>
Signed-off-by: Josip Pavic <josip.pavic(a)amd.com>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 5211c1c0f3c0..613d09c42f3b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3270,6 +3270,9 @@ static bool dc_dmub_should_send_dirty_rect_cmd(struct dc *dc, struct dc_stream_s
if (stream->link->replay_settings.config.replay_supported)
return true;
+ if (stream->ctx->dce_version >= DCN_VERSION_3_5 && stream->abm_level)
+ return true;
+
return false;
}
--
2.34.1