March 2024 - Linux-stable-mirror

[PATCH v2] serial: core: only stop transmit when HW fifo is empty

by Jonas Gorski

If the circular buffer is empty, it just means we fit all characters to send into the HW fifo, but not that the hardware finished transmitting them. So if we immediately call stop_tx() after that, this may abort any pending characters in the HW fifo, and cause dropped characters on the console. Fix this by only stopping tx when the tx HW fifo is actually empty. Fixes: 8275b48b2780 ("tty: serial: introduce transmit helpers") Cc: stable(a)vger.kernel.org Signed-off-by: Jonas Gorski <jonas.gorski(a)gmail.com> --- (this is v2 of the bcm63xx-uart fix attempt) v1 -> v2 * replace workaround with fix for core issue * add Cc: for stable I'm somewhat confident this is the core issue causing the broken output with bcm63xx-uart, and there is no actual need for the UART_TX_NOSTOP. I wouldn't be surprised if this also fixes mxs-uart for which UART_TX_NOSTOP was introduced. If it does, there is no need for the flag anymore. include/linux/serial_core.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 55b1f3ba48ac..bb0f2d4ac62f 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -786,7 +786,8 @@ enum UART_TX_FLAGS { if (pending < WAKEUP_CHARS) { \ uart_write_wakeup(__port); \ \ - if (!((flags) & UART_TX_NOSTOP) && pending == 0) \ + if (!((flags) & UART_TX_NOSTOP) && pending == 0 && \ + __port->ops->tx_empty(__port)) \ __port->ops->stop_tx(__port); \ } \ \ -- 2.34.1

13 hours, 20 minutes

2
2
0 0

[PATCH v3] x86/tools: fix line number reported for malformed lines

by Valentin Obst

Commit 35039eb6b199 ("x86: Show symbol name if insn decoder test failed") included symbol lines in the post-processed objdump output consumed by the insn decoder test. This broke the `instuction lines == total lines` property that `insn_decoder_test.c` relied upon to print the offending line's number in error messages. This has the consequence that the line number reported on a test failure is unreated to, and much smaller than, the line that actually caused the problem. Add a new variable that counts the combined (insn+symbol) line count and report this in the error message. Fixes: 35039eb6b199 ("x86: Show symbol name if insn decoder test failed") Cc: stable(a)vger.kernel.org Reviewed-by: Miguel Ojeda <ojeda(a)kernel.org> Tested-by: Miguel Ojeda <ojeda(a)kernel.org> Reported-by: John Baublitz <john.m.baublitz(a)gmail.com> Debugged-by: John Baublitz <john.m.baublitz(a)gmail.com> Signed-off-by: Valentin Obst <kernel(a)valentinobst.de> --- See v2's commit message and [1] for context why this bug made debugging a test failure harder than necessary. [1]: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/insn_… Changes in v3: - Add Cc stable tag in sign-off area. - Make commit message less verbose. - Link to v2: https://lore.kernel.org/r/20240223-x86-insn-decoder-line-fix-v2-1-cde49c69f… Changes in v2: - Added tags 'Reviewed-by', 'Tested-by', 'Reported-by', 'Debugged-by', 'Link', and 'Fixes'. - Explain why this patch fixes the commit mentioned in the 'Fixes' tag. - CCed the stable list and sent to all x86 maintainers. - Link to v1: https://lore.kernel.org/r/20240221-x86-insn-decoder-line-fix-v1-1-47cd5a171… --- arch/x86/tools/insn_decoder_test.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/tools/insn_decoder_test.c b/arch/x86/tools/insn_decoder_test.c index 472540aeabc2..727017a3c3c7 100644 --- a/arch/x86/tools/insn_decoder_test.c +++ b/arch/x86/tools/insn_decoder_test.c @@ -114,6 +114,7 @@ int main(int argc, char **argv) unsigned char insn_buff[16]; struct insn insn; int insns = 0; + int lines = 0; int warnings = 0; parse_args(argc, argv); @@ -123,6 +124,8 @@ int main(int argc, char **argv) int nb = 0, ret; unsigned int b; + lines++; + if (line[0] == '<') { /* Symbol line */ strcpy(sym, line); @@ -134,12 +137,12 @@ int main(int argc, char **argv) strcpy(copy, line); tab1 = strchr(copy, '\t'); if (!tab1) - malformed_line(line, insns); + malformed_line(line, lines); s = tab1 + 1; s += strspn(s, " "); tab2 = strchr(s, '\t'); if (!tab2) - malformed_line(line, insns); + malformed_line(line, lines); *tab2 = '\0'; /* Characters beyond tab2 aren't examined */ while (s < tab2) { if (sscanf(s, "%x", &b) == 1) { --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240221-x86-insn-decoder-line-fix-7b1f2e1732ff Best regards, -- Valentin Obst <kernel(a)valentinobst.de>

4 days

2
2
0 0

[PATCH v2 0/3] QCM2290 LMH

by Konrad Dybcio

Wire up LMH on QCM2290 and fix a bad bug while at it. P1-2 for thermal, P3 for qcom Signed-off-by: Konrad Dybcio <konrad.dybcio(a)linaro.org> --- Changes in v2: - Pick up tags - Fix a couple typos in commit messages - Drop stray msm8998 binding addition - Link to v1: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v1-0-50c60ffe1130@linaro.o… --- Konrad Dybcio (2): dt-bindings: thermal: lmh: Add QCM2290 compatible thermal: qcom: lmh: Check for SCM availability at probe Loic Poulain (1): arm64: dts: qcom: qcm2290: Add LMH node Documentation/devicetree/bindings/thermal/qcom-lmh.yaml | 12 ++++++++---- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 14 +++++++++++++- drivers/thermal/qcom/lmh.c | 3 +++ 3 files changed, 24 insertions(+), 5 deletions(-) --- base-commit: 8ffc8b1bbd505e27e2c8439d326b6059c906c9dd change-id: 20240308-topic-rb1_lmh-1e0f440c392a Best regards, -- Konrad Dybcio <konrad.dybcio(a)linaro.org>

5 days, 8 hours

6
12
0 0

FAILED: patch "[PATCH] ext4: fix bug_on in __es_tree_search" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d36f6ed761b53933b0b4126486c10d3da7751e7f Mon Sep 17 00:00:00 2001 From: Baokun Li <libaokun1(a)huawei.com> Date: Wed, 18 May 2022 20:08:16 +0800 Subject: [PATCH] ext4: fix bug_on in __es_tree_search Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/extents_status.c:199! [...] RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline] RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217 [...] Call Trace: ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766 ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561 ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964 ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384 ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567 ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980 ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031 ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257 v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63 v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82 vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368 dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490 ext4_quota_enable fs/ext4/super.c:6137 [inline] ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163 ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754 mount_bdev+0x2e9/0x3b0 fs/super.c:1158 mount_fs+0x4b/0x1e4 fs/super.c:1261 [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_enable_quotas ext4_quota_enable ext4_iget __ext4_iget ext4_ext_check_inode ext4_ext_check __ext4_ext_check ext4_valid_extent_entries Check for overlapping extents does't take effect dquot_enable vfs_load_quota_inode v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent ext4_es_cache_extent __es_tree_search ext4_es_end BUG_ON(es->es_lblk + es->es_len < es->es_lblk) The error ext4 extents is as follows: 0af3 0300 0400 0000 00000000 extent_header 00000000 0100 0000 12000000 extent1 00000000 0100 0000 18000000 extent2 02000000 0400 0000 14000000 extent3 In the ext4_valid_extent_entries function, if prev is 0, no error is returned even if lblock<=prev. This was intended to skip the check on the first extent, but in the error image above, prev=0+1-1=0 when checking the second extent, so even though lblock<=prev, the function does not return an error. As a result, bug_ON occurs in __es_tree_search and the system panics. To solve this problem, we only need to check that: 1. The lblock of the first extent is not less than 0. 2. The lblock of the next extent is not less than the next block of the previous extent. The same applies to extent_idx. Cc: stable(a)kernel.org Fixes: 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 474479ce76e0..c148bb97b527 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -372,7 +372,7 @@ static int ext4_valid_extent_entries(struct inode *inode, { unsigned short entries; ext4_lblk_t lblock = 0; - ext4_lblk_t prev = 0; + ext4_lblk_t cur = 0; if (eh->eh_entries == 0) return 1; @@ -396,11 +396,11 @@ static int ext4_valid_extent_entries(struct inode *inode, /* Check for overlapping extents */ lblock = le32_to_cpu(ext->ee_block); - if ((lblock <= prev) && prev) { + if (lblock < cur) { *pblk = ext4_ext_pblock(ext); return 0; } - prev = lblock + ext4_ext_get_actual_len(ext) - 1; + cur = lblock + ext4_ext_get_actual_len(ext); ext++; entries--; } @@ -420,13 +420,13 @@ static int ext4_valid_extent_entries(struct inode *inode, /* Check for overlapping index extents */ lblock = le32_to_cpu(ext_idx->ei_block); - if ((lblock <= prev) && prev) { + if (lblock < cur) { *pblk = ext4_idx_pblock(ext_idx); return 0; } ext_idx++; entries--; - prev = lblock; + cur = lblock + 1; } } return 1;

5 days, 22 hours

2
1
0 0

[PATCH 1/2] SELinux: Fix lsm_get_self_attr()

by Mickaël Salaün

selinux_lsm_getattr() may not initialize the value's pointer in some case. As for proc_pid_attr_read(), initialize this pointer to NULL in selinux_getselfattr() to avoid an UAF in the kfree() call. Cc: Casey Schaufler <casey(a)schaufler-ca.com> Cc: Paul Moore <paul(a)paul-moore.com> Cc: stable(a)vger.kernel.org Fixes: 762c934317e6 ("SELinux: Add selfattr hooks") Signed-off-by: Mickaël Salaün <mic(a)digikod.net> --- security/selinux/hooks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index a6bf90ace84c..338b023a8c3e 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -6559,7 +6559,7 @@ static int selinux_getselfattr(unsigned int attr, struct lsm_ctx __user *ctx, size_t *size, u32 flags) { int rc; - char *val; + char *val = NULL; int val_len; val_len = selinux_lsm_getattr(attr, current, &val); -- 2.43.0

6 days, 4 hours

3
16
0 0

[PATCH] drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2

by Wayne Lin

[Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <leon.weiss(a)ruhr-uni-bochum.de> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ru… Cc: lyude(a)redhat.com Cc: imre.deak(a)intel.com Cc: stable(a)vger.kernel.org Cc: regressions(a)lists.linux.dev Signed-off-by: Wayne Lin <Wayne.Lin(a)amd.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 2 +- drivers/gpu/drm/display/drm_dp_mst_topology.c | 4 +--- drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- include/drm/display/drm_dp_mst_helper.h | 1 - 5 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index c27063305a13..2c36f3d00ca2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -363,7 +363,7 @@ void dm_helpers_dp_mst_send_payload_allocation( mst_state = to_drm_dp_mst_topology_state(mst_mgr->base.state); new_payload = drm_atomic_get_mst_payload_state(mst_state, aconnector->mst_output_port); - ret = drm_dp_add_payload_part2(mst_mgr, mst_state->base.state, new_payload); + ret = drm_dp_add_payload_part2(mst_mgr, new_payload); if (ret) { amdgpu_dm_set_mst_status(&aconnector->mst_status, diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c index 03d528209426..95fd18f24e94 100644 --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c @@ -3421,7 +3421,6 @@ EXPORT_SYMBOL(drm_dp_remove_payload_part2); /** * drm_dp_add_payload_part2() - Execute payload update part 2 * @mgr: Manager to use. - * @state: The global atomic state * @payload: The payload to update * * If @payload was successfully assigned a starting time slot by drm_dp_add_payload_part1(), this @@ -3430,14 +3429,13 @@ EXPORT_SYMBOL(drm_dp_remove_payload_part2); * Returns: 0 on success, negative error code on failure. */ int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr, - struct drm_atomic_state *state, struct drm_dp_mst_atomic_payload *payload) { int ret = 0; /* Skip failed payloads */ if (payload->payload_allocation_status != DRM_DP_MST_PAYLOAD_ALLOCATION_DFP) { - drm_dbg_kms(state->dev, "Part 1 of payload creation for %s failed, skipping part 2\n", + drm_dbg_kms(mgr->dev, "Part 1 of payload creation for %s failed, skipping part 2\n", payload->port->connector->name); return -EIO; } diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 53aec023ce92..2fba66aec038 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -1160,7 +1160,7 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state, if (first_mst_stream) intel_ddi_wait_for_fec_status(encoder, pipe_config, true); - drm_dp_add_payload_part2(&intel_dp->mst_mgr, &state->base, + drm_dp_add_payload_part2(&intel_dp->mst_mgr, drm_atomic_get_mst_payload_state(mst_state, connector->port)); if (DISPLAY_VER(dev_priv) >= 12) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 0c3d88ad0b0e..88728a0b2c25 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -915,7 +915,7 @@ nv50_msto_cleanup(struct drm_atomic_state *state, msto->disabled = false; drm_dp_remove_payload_part2(mgr, new_mst_state, old_payload, new_payload); } else if (msto->enabled) { - drm_dp_add_payload_part2(mgr, state, new_payload); + drm_dp_add_payload_part2(mgr, new_payload); msto->enabled = false; } } diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h index 9b19d8bd520a..6c9145abc7e2 100644 --- a/include/drm/display/drm_dp_mst_helper.h +++ b/include/drm/display/drm_dp_mst_helper.h @@ -851,7 +851,6 @@ int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_topology_state *mst_state, struct drm_dp_mst_atomic_payload *payload); int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr, - struct drm_atomic_state *state, struct drm_dp_mst_atomic_payload *payload); void drm_dp_remove_payload_part1(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_topology_state *mst_state, -- 2.37.3

1 week

7
7
0 0

FAILED: patch "[PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 6c41468c7c12d74843bb414fc00307ea8a6318c3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023041134-curvature-campsite-e51b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 6c41468c7c12 ("KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection") d4963e319f1f ("KVM: x86: Make kvm_queued_exception a properly named, visible struct") 6ad75c5c99f7 ("KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception") 5623f751bd9c ("KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1)") 8d178f460772 ("KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like") eba9799b5a6e ("KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS") a61d7c5432ac ("KVM: x86: Trace re-injected exceptions") 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction") 3741aec4c38f ("KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported") cd9e6da8048c ("KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"") 00f08d99dd7d ("KVM: nSVM: Sync next_rip field from vmcb12 to vmcb02") 9bd1f0efa859 ("KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault") c3634d25fbee ("KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry") 1d5a1b5860ed ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running") db663af4a001 ("kvm: x86: SVM: use vmcb* instead of svm->vmcb where it makes sense") b9f3973ab3a8 ("KVM: x86: nSVM: implement nested VMLOAD/VMSAVE") 23e5092b6e2a ("KVM: SVM: Rename hook implementations to conform to kvm_x86_ops' names") e27bc0440ebd ("KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor names") 068f7ea61895 ("KVM: SVM: improve split between svm_prepare_guest_switch and sev_es_prepare_guest_switch") e1779c2714c3 ("KVM: x86: nSVM: fix potential NULL derefernce on nested migration") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6c41468c7c12d74843bb414fc00307ea8a6318c3 Mon Sep 17 00:00:00 2001 From: Sean Christopherson <seanjc(a)google.com> Date: Wed, 22 Mar 2023 07:32:59 -0700 Subject: [PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection When injecting an exception into a vCPU in Real Mode, suppress the error code by clearing the flag that tracks whether the error code is valid, not by clearing the error code itself. The "typo" was introduced by recent fix for SVM's funky Paged Real Mode. Opportunistically hoist the logic above the tracepoint so that the trace is coherent with respect to what is actually injected (this was also the behavior prior to the buggy commit). Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable(a)vger.kernel.org Cc: Maxim Levitsky <mlevitsk(a)redhat.com> Signed-off-by: Sean Christopherson <seanjc(a)google.com> Message-Id: <20230322143300.2209476-2-seanjc(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 45017576ad5e..7d6f98b7635f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9908,13 +9908,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu) static void kvm_inject_exception(struct kvm_vcpu *vcpu) { + /* + * Suppress the error code if the vCPU is in Real Mode, as Real Mode + * exceptions don't report error codes. The presence of an error code + * is carried with the exception and only stripped when the exception + * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do + * report an error code despite the CPU being in Real Mode. + */ + vcpu->arch.exception.has_error_code &= is_protmode(vcpu); + trace_kvm_inj_exception(vcpu->arch.exception.vector, vcpu->arch.exception.has_error_code, vcpu->arch.exception.error_code, vcpu->arch.exception.injected); - if (vcpu->arch.exception.error_code && !is_protmode(vcpu)) - vcpu->arch.exception.error_code = false; static_call(kvm_x86_inject_exception)(vcpu); }

1 week, 2 days

3
2
0 0

FAILED: patch "[PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 6c41468c7c12d74843bb414fc00307ea8a6318c3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023041135-yippee-shabby-b9ad@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 6c41468c7c12 ("KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection") d4963e319f1f ("KVM: x86: Make kvm_queued_exception a properly named, visible struct") 6ad75c5c99f7 ("KVM: x86: Rename kvm_x86_ops.queue_exception to inject_exception") 5623f751bd9c ("KVM: x86: Treat #DBs from the emulator as fault-like (code and DR7.GD=1)") 8d178f460772 ("KVM: nVMX: Treat General Detect #DB (DR7.GD=1) as fault-like") eba9799b5a6e ("KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS") a61d7c5432ac ("KVM: x86: Trace re-injected exceptions") 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction") 3741aec4c38f ("KVM: SVM: Stuff next_rip on emulated INT3 injection if NRIPS is supported") cd9e6da8048c ("KVM: SVM: Unwind "speculative" RIP advancement if INTn injection "fails"") 00f08d99dd7d ("KVM: nSVM: Sync next_rip field from vmcb12 to vmcb02") 9bd1f0efa859 ("KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault") c3634d25fbee ("KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry") 1d5a1b5860ed ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running") db663af4a001 ("kvm: x86: SVM: use vmcb* instead of svm->vmcb where it makes sense") b9f3973ab3a8 ("KVM: x86: nSVM: implement nested VMLOAD/VMSAVE") 23e5092b6e2a ("KVM: SVM: Rename hook implementations to conform to kvm_x86_ops' names") e27bc0440ebd ("KVM: x86: Rename kvm_x86_ops pointers to align w/ preferred vendor names") 068f7ea61895 ("KVM: SVM: improve split between svm_prepare_guest_switch and sev_es_prepare_guest_switch") e1779c2714c3 ("KVM: x86: nSVM: fix potential NULL derefernce on nested migration") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6c41468c7c12d74843bb414fc00307ea8a6318c3 Mon Sep 17 00:00:00 2001 From: Sean Christopherson <seanjc(a)google.com> Date: Wed, 22 Mar 2023 07:32:59 -0700 Subject: [PATCH] KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection When injecting an exception into a vCPU in Real Mode, suppress the error code by clearing the flag that tracks whether the error code is valid, not by clearing the error code itself. The "typo" was introduced by recent fix for SVM's funky Paged Real Mode. Opportunistically hoist the logic above the tracepoint so that the trace is coherent with respect to what is actually injected (this was also the behavior prior to the buggy commit). Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable(a)vger.kernel.org Cc: Maxim Levitsky <mlevitsk(a)redhat.com> Signed-off-by: Sean Christopherson <seanjc(a)google.com> Message-Id: <20230322143300.2209476-2-seanjc(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 45017576ad5e..7d6f98b7635f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9908,13 +9908,20 @@ int kvm_check_nested_events(struct kvm_vcpu *vcpu) static void kvm_inject_exception(struct kvm_vcpu *vcpu) { + /* + * Suppress the error code if the vCPU is in Real Mode, as Real Mode + * exceptions don't report error codes. The presence of an error code + * is carried with the exception and only stripped when the exception + * is injected as intercepted #PF VM-Exits for AMD's Paged Real Mode do + * report an error code despite the CPU being in Real Mode. + */ + vcpu->arch.exception.has_error_code &= is_protmode(vcpu); + trace_kvm_inj_exception(vcpu->arch.exception.vector, vcpu->arch.exception.has_error_code, vcpu->arch.exception.error_code, vcpu->arch.exception.injected); - if (vcpu->arch.exception.error_code && !is_protmode(vcpu)) - vcpu->arch.exception.error_code = false; static_call(kvm_x86_inject_exception)(vcpu); }

1 week, 2 days

3
2
0 0

[PATCH] apparmor: use kvfree_sensitive to free data->data

by Fedor Pchelkin

Inside unpack_profile() data->data is allocated using kvmemdup() so it should be freed with the corresponding kvfree_sensitive(). Also add missing data->data release for rhashtable insertion failure path in unpack_profile(). Found by Linux Verification Center (linuxtesting.org). Fixes: e025be0f26d5 ("apparmor: support querying extended trusted helper extra data") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> --- security/apparmor/policy.c | 2 +- security/apparmor/policy_unpack.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c index 957654d253dd..14df15e35695 100644 --- a/security/apparmor/policy.c +++ b/security/apparmor/policy.c @@ -225,7 +225,7 @@ static void aa_free_data(void *ptr, void *arg) { struct aa_data *data = ptr; - kfree_sensitive(data->data); + kvfree_sensitive(data->data, data->size); kfree_sensitive(data->key); kfree_sensitive(data); } diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c index 5e578ef0ddff..75452acd0e35 100644 --- a/security/apparmor/policy_unpack.c +++ b/security/apparmor/policy_unpack.c @@ -1071,6 +1071,7 @@ static struct aa_profile *unpack_profile(struct aa_ext *e, char **ns_name) if (rhashtable_insert_fast(profile->data, &data->head, profile->data->p)) { + kvfree_sensitive(data->data, data->size); kfree_sensitive(data->key); kfree_sensitive(data); info = "failed to insert data to table"; -- 2.43.0

1 week, 2 days

2
1
0 0

[PATCH v2] drivers/i915/intel_bios: Fix parsing backlight BDB data

by Karthikeyan Ramasubramanian

Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable(a)vger.kernel.org Cc: Jani Nikula <jani.nikula(a)intel.com> Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Signed-off-by: Karthikeyan Ramasubramanian <kramasub(a)chromium.org> --- Changes in v2: - removed checking the block size of the backlight BDB data drivers/gpu/drm/i915/display/intel_bios.c | 19 ++++--------------- drivers/gpu/drm/i915/display/intel_vbt_defs.h | 5 ----- 2 files changed, 4 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index aa169b0055e97..8c1eb05fe77d2 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -1042,22 +1042,11 @@ parse_lfp_backlight(struct drm_i915_private *i915, panel->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; panel->vbt.backlight.controller = 0; if (i915->display.vbt.version >= 191) { - size_t exp_size; + const struct lfp_backlight_control_method *method; - if (i915->display.vbt.version >= 236) - exp_size = sizeof(struct bdb_lfp_backlight_data); - else if (i915->display.vbt.version >= 234) - exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_234; - else - exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_191; - - if (get_blocksize(backlight_data) >= exp_size) { - const struct lfp_backlight_control_method *method; - - method = &backlight_data->backlight_control[panel_type]; - panel->vbt.backlight.type = method->type; - panel->vbt.backlight.controller = method->controller; - } + method = &backlight_data->backlight_control[panel_type]; + panel->vbt.backlight.type = method->type; + panel->vbt.backlight.controller = method->controller; } panel->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h index a9f44abfc9fc2..b50cd0dcabda9 100644 --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h @@ -897,11 +897,6 @@ struct lfp_brightness_level { u16 reserved; } __packed; -#define EXP_BDB_LFP_BL_DATA_SIZE_REV_191 \ - offsetof(struct bdb_lfp_backlight_data, brightness_level) -#define EXP_BDB_LFP_BL_DATA_SIZE_REV_234 \ - offsetof(struct bdb_lfp_backlight_data, brightness_precision_bits) - struct bdb_lfp_backlight_data { u8 entry_size; struct lfp_backlight_data_entry data[16]; -- 2.44.0.rc0.258.g7320e95886-goog

1 week, 5 days

2
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2024